Zaloguj się

Gotowe bibliografie tematyczne / Metal distribution / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Metal distribution.

Artykuły w czasopismach na temat „Metal distribution”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Metal distribution”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Cimermane, Inese, and Gotfrīds Noviks. "HEAVY METAL DISTRIBUTION IN SOIL." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 20 (April 20, 2016): 250–55. http://dx.doi.org/10.17770/het2016.20.3519.

Pełny tekst źródła

Streszczenie:

In this research was explored the distribution of heavy metals in soil. The information was gathered to find the main regularities between soil and metals. These regularities are important to understand due to the fact that the metal toxicity may cause negative influence on the ecosystems. This problem is especially relevant nowadays, when transport, agriculture and industrialization is developing every day.

Style APA, Harvard, Vancouver, ISO itp.

2

Karakus, C., and D. ‐T Chin. "Metal Distribution in Jet Plating." Journal of The Electrochemical Society 141, no. 3 (1994): 691–97. http://dx.doi.org/10.1149/1.2054793.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Damen, W., G. Abbel, and G. de Gendt. "Argon bubbles in slabs, a non-homogeneous distribution." Revue de Métallurgie 94, no. 6 (1997): 745–50. http://dx.doi.org/10.1051/metal/199794060745.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Wang, Chang J., Ibiye A. Roberts, and Diane J. Mynors. "Numerical Simulation of the Temperature Distribution during the Metal Laser Sintering of Parts." Applied Mechanics and Materials 16-19 (October 2009): 475–79. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.475.

Pełny tekst źródła

Streszczenie:

The Metal Laser Sintering (MLS) process has been developed over the last decade to produce 3D parts from CAD files using metal powders. A considerable amount of research has been conducted into the melting and solidifying process of metal powders, mainly to predict the temperature distribution in a single metal powder layer or a few layers. The temperature and thermal residual stress distribution in real parts built using MLS has rarely been reported. Finite element simulations of temperature distributions in metal powders and parts requires huge computing resources, this is the main obstacle

Style APA, Harvard, Vancouver, ISO itp.

5

AIKAWA, Tatsuo, Kyoko MIYAUCHI, Makiko ITO, and Ken NAKAJIMA. "Spatial Distribution of Metal Particles in Dried Metal Paste." Journal of the Japan Society of Colour Material 93, no. 5 (2020): 133–37. http://dx.doi.org/10.4011/shikizai.93.133.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Conte, G., M. C. Rossi, S. Salvatori, F. Tersigni, P. Ascarelli, and E. Cappelli. "Nonuniform current distribution in metal/diamond/metal vertical structures." Applied Physics Letters 82, no. 25 (2003): 4459–61. http://dx.doi.org/10.1063/1.1583855.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Zhang, Weiming, and Tomio Koyama. "Load Distribution of Metal Timing Belts." Journal of Mechanical Design 123, no. 1 (1999): 98–103. http://dx.doi.org/10.1115/1.1326917.

Pełny tekst źródła

Streszczenie:

Metal timing belt (perforation metal belt) is a new element of mechanical transmission and its application is increasing in many fields of industry in recent years. However, there has been almost no research on metal timing belt, especially its strength. In this paper, as a basic study on the strength of the metal timing belt, the distribution of the belt tension and the tooth load in metal timing belts is theoretically analyzed under the assumption that the belt pitch equals the pulley pitch. The tension distribution and the load distribution are the most important factors that influence the

Style APA, Harvard, Vancouver, ISO itp.

8

Jiao, Ke-xin, Jian-liang Zhang, Guangwei Wang, and Chunlin Chen. "Investigation of water distribution features among pipes in BF hearth." Metallurgical Research & Technology 116, no. 1 (2019): 121. http://dx.doi.org/10.1051/metal/2018052.

Pełny tekst źródła

Streszczenie:

The cooling system is important for the safety of blast furnace production. Measurements for over six months on a 1350 m3 blast furnace have shown that water volume distribution among the pipes in hearth is not uniform. The nature of the water volume distribution curve remains constant while furnace operation is normal, but is influenced by features of heat flux and hydrodynamic to the bustle pipe, which result in a 40–60% difference between maximum and minimum flow rates through individual pipe assemblies. A change in water volume is generally taken up by pipes that are working well. The wate

Style APA, Harvard, Vancouver, ISO itp.

9

Shen, Yao-zong, Kai Zhao, Zheng Kong, Yu-zhu Zhang, Yan Shi, and Yuan-hong Qi. "Three-dimensional numerical simulation of velocity field distribution in an oxy-coal combustor-melter-separator furnace." Metallurgical Research & Technology 118, no. 5 (2021): 510. http://dx.doi.org/10.1051/metal/2021066.

Pełny tekst źródła

Streszczenie:

In view of the influence of tuyere layout change on velocity field in oxy-coal combustor-melter-separator furnace, three-dimensional numerical simulation method was used to compare the distribution of velocity field in the furnace under different tuyere layout. The purpose is to explore the influence of the velocity distribution on the molten pool flow in the process of multi-tuyere injection. It is shown that the maximum velocity of the upper and lower tuyeres is 60 m/s and 50 m/s. And the change of tuyere has a significant effect on the velocity distribution in the molten pool, and the sudde

Style APA, Harvard, Vancouver, ISO itp.

10

Xu, Wenxuan, Fuming Zhang, Gele Qing, Yanglong Li, and Fengqin Wang. "Effect of the coke particle size distribution on the burden layer porosity of blast furnace." Metallurgical Research & Technology 121, no. 6 (2024): 618. http://dx.doi.org/10.1051/metal/2024078.

Pełny tekst źródła

Streszczenie:

The effect of the coke particle size distribution on the burden layer porosity of blast furnace were analyzed by DEM simulation in this study, and the uneven index proposed to achieve quantitative evaluation of the coke particle size distribution. The calculation results show that with the increase of uneven index of coke particle size distribution, 1) the total discharging time of coke discharged from hopper to throat process from 170 s decrease to 163 s. 2) the SI index of small particle is rising gradually but the SI index of large particle decreases gradually in the central region of the t

Style APA, Harvard, Vancouver, ISO itp.

11

Borůvka, L., and O. Drábek. "Heavy metal distribution between fractions of humic substances in heavily polluted soils." Plant, Soil and Environment 50, No. 8 (2011): 339–45. http://dx.doi.org/10.17221/4041-pse.

Pełny tekst źródła

Streszczenie:

Soil organic matter is important in controlling heavy metal behaviour in soils. This study aims to determine the distribution of organically bound Cd, Pb, and Zn between humic and fulvic acids in 20 samples of heavily polluted Fluvisols. Traditional procedure of alkaline sodium hydroxide/pyrophosphate extraction of humic substances with consequent humic acids precipitation by acidification was used. All of the three metals were bound predominantly on fulvic acids (mean share was 98.4, 82.0, and 95.7% of total organically bound Cd, Pb, and Zn content, respectively). Mainly the level of pollutio

Style APA, Harvard, Vancouver, ISO itp.

12

Hepburn, J. S. "EPMA/TEM characterization of a Pt/Al2O3 catalyst with a nonuniform internal distribution." Proceedings, annual meeting, Electron Microscopy Society of America 47 (August 6, 1989): 274–75. http://dx.doi.org/10.1017/s0424820100153348.

Pełny tekst źródła

Streszczenie:

The internal distribution of catalytically active metal within a supported metal catalyst can determine its activity, selectivity, and durability. Since the early 1950s, electron probe microanalysis has grown into a mature and widely available technique. By providing quantitative elemental analysis from volumes on the order of 1μm3, EPMA is uniquely suited for the study of metal concentration profiles in supported metal catalysts. However, independent knowledge of metal particle size or dispersion is needed to identify the catalytically active fraction of deposited metal. Most available techni

Style APA, Harvard, Vancouver, ISO itp.

13

Xu, Wenxuan, Shusen Cheng, Qun Niu, Wei Hu, and Jiawen Bang. "Investigation on the uneven distribution of different types of ores in the hopper and stock surface during the charging process of blast furnace based on discrete element method." Metallurgical Research & Technology 116, no. 3 (2019): 314. http://dx.doi.org/10.1051/metal/2018099.

Pełny tekst źródła

Streszczenie:

The model of an actual 4070 m3 bell-less top blast furnace with two parallel hoppers was established, and the distribution of the sinter, pellet, and lump ore in the hopper and the stock surface was analyzed based on the discrete element method. The results show that the distribution of different types of ores is not uniform in the hopper already. In the radial direction of the stock surface, the sinter volume fraction in the center and peripheral region of the stock surface is higher than that in the intermediate region of the stock surface, but the volume distribution of the pellet and lump

Style APA, Harvard, Vancouver, ISO itp.

14

KAMITANI, Masaharu. "Rare metal resources with uneven distribution." RESOURCES PROCESSING 36, no. 4 (1989): 179–84. http://dx.doi.org/10.4144/rpsj1986.36.179.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Nakayama, Kei, Ryo Ishikawa, Akihide Kuwabara, et al. "Transition-Metal Distribution in Brownmillerite Ca2FeCoO5." Inorganic Chemistry 58, no. 15 (2019): 10209–16. http://dx.doi.org/10.1021/acs.inorgchem.9b01356.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

White, Kevin D., and Marty E. Tittlebaum. "Metal Distribution and Contamination in Sediments." Journal of Environmental Engineering 111, no. 2 (1985): 161–75. http://dx.doi.org/10.1061/(asce)0733-9372(1985)111:2(161).

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Tijero, Julio, Elita Guardiola, Manuel Cortijo, and Arturo Diaz-barrionuevo. "Heavy Metal Distribution in Anaerobic Sludges." Separation Science and Technology 25, no. 5 (1990): 653–58. http://dx.doi.org/10.1080/01496399008050355.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Tsuchiyama, Fumi, Naomi Hisanaga, Eiji Shibata, et al. "Pulmonary metal distribution in urban dwellers." International Archives of Occupational and Environmental Health 70, no. 2 (1997): 77–84. http://dx.doi.org/10.1007/s004200050190.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Lotz, Tom, Shoubao Su, and Christian Opp. "Multi-Metal Distribution Patterns in Soils of the Sacramento River Floodplain and Their Controlling Factors." Applied Sciences 12, no. 17 (2022): 8462. http://dx.doi.org/10.3390/app12178462.

Pełny tekst źródła

Streszczenie:

Metal contamination, especially in river floodplain soils, can have detrimental effects on human health. Much research has been conducted to describe the distribution patterns of metals and the factors involved in these patterns. However, most studies focus on the distribution of individual metals in soils, not on the co-occurrence of metals, and on a selection of metals associated with anthropogenic sources known to have especially severe effects; this had led to a lack of knowledge about many other metals with potentially harmful effects. Therefore, this study aimed to identify the multi-met

Style APA, Harvard, Vancouver, ISO itp.

20

Blindauer, Claudia. "Homoeostasis and distribution of essential metals in cells: Principles and molecular mechanisms." Biochemist 34, no. 5 (2012): 4–13. http://dx.doi.org/10.1042/bio03405004.

Pełny tekst źródła

Streszczenie:

It has long been recognized that all organisms have a requirement for a range of metal ions, serving a variety of purposes (Table 1)1. The consequences of deficiency for each of these metal ions are grave; however, even essential metal ions are demonstrably toxic at elevated concentrations2. Therefore both unicellular and multicellular organisms have developed sophisticated mechanisms to regulate the intracellular concentrations and distribution of essential metal ions. The importance of such mechanisms is illustrated by the severity of genetic diseases related to metal mishandling, which incl

Style APA, Harvard, Vancouver, ISO itp.

21

d'Anselme, A., P. Tassot, and J. P. Radot. "Optimisation de la distribution d'argon et des réfractaires à Sollac Dunkerque." Revue de Métallurgie 93, no. 4 (1996): 567–73. http://dx.doi.org/10.1051/metal/199693040567.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Boscher, D., and M. Gaspérini. "Strain distribution and plastic localization during bending of metal-rubber profiles." Revue de Métallurgie 100, no. 9 (2003): 835–42. http://dx.doi.org/10.1051/metal:2003209.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Talukder, R. "Heavy metal distribution and contamination in wetland sediments: A review." International Journal of Natural and Social Sciences 9, no. 2 (2022): 54–60. https://doi.org/10.5281/zenodo.7213428.

Pełny tekst źródła

Streszczenie:

Wetlands are an integral part of the watershed ecosystems, and consists of shallow water. These wetlands contain high levels of nutrients and primary productivity which is ideal for the development of organisms that form the base of the food web and feed many species of fish, amphibians, shellfish, and insects. At the same time, due to extensive use and exploited by mankind civilization, heavy mental pollution has an important impact on wetland ecosystems. Heavy metals are released into the environment from a variety of natural and anthropogenic sources. Assessing heavy metals concentration in

Style APA, Harvard, Vancouver, ISO itp.

24

Shi, Benhui, Bingnan Liu, Yubo Zhang, Zhiguo Luo, and Zongshu Zou. "Evaluation and discussion on the circumferential distribution of hot blast in the blast furnace." Metallurgical Research & Technology 122, no. 1 (2024): 108. https://doi.org/10.1051/metal/2024100.

Pełny tekst źródła

Streszczenie:

The hot blast distribution has a great effect on the smooth operation of the blast furnace (BF). The standard deviation of blast volume of every tuyere (SD-BVT) is generally considered as an indicator for evaluating the uniformity of hot blast distribution. Based on the simulation, under the condition that all tuyeres have the same diameter, four circumferential symmetrical areas with large blast volume appear at 0, 90, 180 and 270 deg in Ansteel No. 1 BF, the value of SD-BVT is 1.32. In order to improve the uniformity of hot blast distribution, the diameter of the tuyeres with the largest bla

Style APA, Harvard, Vancouver, ISO itp.

25

Yamaguchi, K., S. Amano, M. Nakayama, and K. Morii. "Burden distribution control using bell-less top charging at Kimitsu blast furnaces." Revue de Métallurgie 87, no. 3 (1990): 247–58. http://dx.doi.org/10.1051/metal/199087030247.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Riddle, M., and P. Whitfield. "Design and operation of a Gimbal Top distribution system for ironmaking plants." Revue de Métallurgie 104, no. 3 (2007): 113–19. http://dx.doi.org/10.1051/metal:2007137.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Xu, Kuan, and Ming-hua Bai. "DEM simulation of particle descending velocity distribution in the reduction shaft furnace." Metallurgical Research & Technology 113, no. 6 (2016): 603. http://dx.doi.org/10.1051/metal/2016035.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Zhang, Xingsheng, Zhiguo Luo, and Zongshu Zou. "Performance simulation and optimization of COREX shaft furnace with central gas distribution." Metallurgical Research & Technology 116, no. 1 (2018): 112. http://dx.doi.org/10.1051/metal/2018050.

Pełny tekst źródła

Streszczenie:

To improve the distribution of the reducing gas inside the shaft furnace, recently, a central gas distribution (CGD) device is installed at the bottom of the shaft furnace in Bayi Steel. In this work, a two-dimensional steady-state mathematical model, including momentum, heat and mass transfers and chemical reaction, is developed to study the performance of the furnace with CGD. The model is validated by industrial production data of COREX-3000, and then it is used to study the detailed phenomena in the furnace with CGD. The results show that, compared with the traditional COREX shaft furnace

Style APA, Harvard, Vancouver, ISO itp.

29

Moulinier, F. "New applications of stainless steel in the domestic distribution of drinking water." Revue de Métallurgie 102, no. 10 (2005): 721–31. http://dx.doi.org/10.1051/metal:2005110.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Jia, Wenlei, Bo Li, Shiwei Zhou, Yonggang Wei, and Hua Wang. "Distribution behavior and deportation of arsenic in copper top-blown smelting process." Metallurgical Research & Technology 120, no. 5 (2023): 507. http://dx.doi.org/10.1051/metal/2023065.

Pełny tekst źródła

Streszczenie:

In recent years, the impurity content in copper concentrate increases gradually with the consumption of high-grade copper ore. When the arsenic content in the raw materials increases, large amounts of arsenic enter the sulfuric acid system, resulting in large amounts of waste acid that put great pressure on production and environmental protection. Using the distribution characteristics of arsenic in each phase, the possibility of enriching arsenic in the form of stable arsenates in the slag was investigated to enrich arsenic in the form of stable arsenates in the slag. It is shown that increas

Style APA, Harvard, Vancouver, ISO itp.

31

Lozano, L. J., F. J. Alguacil, M. Alonso, and C. Godínez. "Review of algorithms for modeling metal distribution equilibria in liquid-liquid extraction processes." Revista de Metalurgia 41, no. 5 (2005): 374–83. http://dx.doi.org/10.3989/revmetalm.2005.v41.i5.227.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Ersoni, M., Xiucheng Wu, P. E. Jessop, and J. P. Noad. "Optical signal distribution in waveguide-coupled metal-smiconductor-metal detector arrays." Journal of Lightwave Technology 15, no. 2 (1997): 328–33. http://dx.doi.org/10.1109/50.554385.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

DeHart, Cameron. "Metal by numbers: Revisiting the uneven distribution of heavy metal music." Metal Music Studies 4, no. 3 (2018): 559–71. http://dx.doi.org/10.1386/mms.4.3.559_1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Anusavice, K. J., B. Hojjatie, and P. H. Dehoff. "Influence of Metal Thickness on Stress Distribution in Metal-Ceramic Crowns." Journal of Dental Research 65, no. 9 (1986): 1173–78. http://dx.doi.org/10.1177/00220345860650091201.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Venugopalan, H., and T. Debroy. "Metal distribution in alumina/aluminium composites synthesized by directed metal oxidation." Journal of Materials Science 31, no. 19 (1996): 5101–8. http://dx.doi.org/10.1007/bf00355911.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Bai, Kaikai, Yuzhu Pan, Jingsong Wang, Haibin Zuo, and Qingguo Xue. "Optimizing MgO distribution between sinter and pellet based on melting behavior and interaction." Metallurgical Research & Technology 118, no. 3 (2021): 318. http://dx.doi.org/10.1051/metal/2021042.

Pełny tekst źródła

Streszczenie:

During blast furnace ironmaking, MgO flux is added to the sinter or pellets to reduce the viscosity and improve the desulfurization capacity of the slag. The distribution of total MgO addition between the sinter and pellets affects the interaction between the ferrous burdens. Inappropriate interaction between different burdens promotes the formation of an excessive amount of low-melting-point liquid phases, which reduces the permeability of the cohesive zone. In this study, the effect of MgO on the interaction between the sinter and pellets was visualized during heating and further investigate

Style APA, Harvard, Vancouver, ISO itp.

37

Guo, Junli, Qiang Hu, Jin Zou, and Deping Lu. "Effect of cooling rate on morphology and distribution of Fe phase in solidification structure of Cu-20Fe alloy." Metallurgical Research & Technology 120, no. 3 (2023): 312. http://dx.doi.org/10.1051/metal/2023044.

Pełny tekst źródła

Streszczenie:

Cu–Fe alloys are high-strength and high-conductivity copper-based materials with great potential. The solidified structures comprise of an Fe phase and Cu matrix, and the solidification structure significantly affects the properties of the alloys. The cooling rate during solidification affects the Fe phase morphologies, sizes, and distribution uniformity in Cu–Fe alloys, making it an essential control parameter. The solidification process of a Cu-20Fe alloy were analyzed at cooling rates from 0.3–13.0 °C/s using a confocal scanning laser microscope (CLSM). The secondary dendrite arm spacing (S

Style APA, Harvard, Vancouver, ISO itp.

38

Havelange, O., G. Danloy, and R. Franssen. "Helium tracing : a new tool for gas distribution control in the blast furnace." Revue de Métallurgie 97, no. 1 (2000): 29–34. http://dx.doi.org/10.1051/metal/200097010029.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Basu, S., A. K. Lahiri, and S. Seetharaman. "Distribution of phosphorus and oxygen between liquid steel and basic oxygen steelmaking slag." Revue de Métallurgie 106, no. 1 (2009): 21–26. http://dx.doi.org/10.1051/metal/2009010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Shen, W., S. L. Wu, K. P. Du, M. Y. Kou, and Y. Sun. "Measurements of heat loss and its distribution for the COREX-3000 ironmaking process." Metallurgical Research & Technology 111, no. 2 (2014): 75–84. http://dx.doi.org/10.1051/metal/2014017.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Meng, Zhao Hong, Yuan Fu Zheng, and Hai Feng Xiao. "Distribution and Ecological Risk Assessment of Heavy Metal Elements in Soil." Advanced Materials Research 183-185 (January 2011): 82–87. http://dx.doi.org/10.4028/www.scientific.net/amr.183-185.82.

Pełny tekst źródła

Streszczenie:

In order to assess the risk of heavy metal elements, including mercury, cadmium, lead, chromium, copper and zinc in soil, the soil was tested by Nemerow and Hakanson methods to assess the pollution and potentially ecological risk. The results indicated that among six kinds of heavy mental elements, cadmium had the highest accumulation, lead and chromium had the lowest accumulation in urban topsoil by comparison to the background concentration of the second grade standard values of the Chinese environmental quality standards for soil. The pollution degree of heavy metals used by Nemerow methods

Style APA, Harvard, Vancouver, ISO itp.

42

Liu, Chenghong, and Xueyong Ding. "Analyses of multi-size particle mixing behavior in an ore pre-reduction rotary kiln by discrete element method." Metallurgical Research & Technology 118, no. 4 (2021): 403. http://dx.doi.org/10.1051/metal/2021038.

Pełny tekst źródła

Streszczenie:

The particle distribution in pre-reduction rotary kiln directly affects the reduction process of iron ore, and in-depth understanding of the mixing behavior is helpful to improve the product quality and productivity. The present work focused on the mixed dynamics of multi-component and multi-size systems in rotary kiln using discrete element method (DEM). We first confirmed that the final particle distribution and mixing degree are independent of the initial particle distribution, and then further discussed the influence of the key operating parameters such as rotating speed, average size rati

Style APA, Harvard, Vancouver, ISO itp.

43

Putra, Azma, Siti Norfarizan, Haryanti Samekto, and Mohd Azli Salim. "Static Analysis of a Laminated Rubber-Metal Spring Using Finite Element Method." Advanced Materials Research 845 (December 2013): 86–90. http://dx.doi.org/10.4028/www.scientific.net/amr.845.86.

Pełny tekst źródła

Streszczenie:

The laminated rubber-metal spring has been widely applied for earthquake vibration isolation which deals mainly for horizontal motion at a very low frequency input. This article presents the effect of a vertical vibration input, which is also aimed at applying the laminated spring for high frequency excitation. Static analysis is discussed here using the Finite Element Analysis (FEA) to observe the stress and strain distribution as well as the safety factor of the isolator due to the axial force. Solid rubber spring experiences greater deformation while it reduces for the laminated rubber-meta

Style APA, Harvard, Vancouver, ISO itp.

44

Li, Ming-zhou, Jie-min Zhou, Chang-ren Tong, Wen-hai Zhang, and He-song Li. "Mathematical model of whole-process calculation for bottom-blowing copper smelting." Metallurgical Research & Technology 115, no. 1 (2017): 107. http://dx.doi.org/10.1051/metal/2017078.

Pełny tekst źródła

Streszczenie:

The distribution law of materials in smelting products is key to cost accounting and contaminant control. Regardless, the distribution law is difficult to determine quickly and accurately by mere sampling and analysis. Mathematical models for material and heat balance in bottom-blowing smelting, converting, anode furnace refining, and electrolytic refining were established based on the principles of material (element) conservation, energy conservation, and control index constraint in copper bottom-blowing smelting. Simulation of the entire process of bottom-blowing copper smelting was establis

Style APA, Harvard, Vancouver, ISO itp.

45

Geng, Yaheng, Rui Guo, Yizhuo Li, Xin Zhang, and Jiaxiong Lin. "Characteristics of coke pore formation and its effect on solution loss degradation." Metallurgical Research & Technology 117, no. 1 (2020): 112. http://dx.doi.org/10.1051/metal/2020004.

Pełny tekst źródła

Streszczenie:

Pore structure is an important factor that affects coke thermal properties. In order to reveal the formation regularity of coke pore structure, high temperature carbonization experiment of blending coals was carried out in 40 kg test coke oven. The pore structure of different regions and different orientations of the obtained coke was detected by microscope. The ratio of the average pore diameter of the coke to the average wall thickness was highly correlated with the square of porosity. The relationship shows that during coking, the development of the wall thickness is restricted by pore coal

Style APA, Harvard, Vancouver, ISO itp.

46

Cui, Li, Zhibo Peng, Xiaokun Yuan, Dingyong He, and Li Chen. "EBSD Investigation of the Microtexture of Weld Metal and Base Metal in Laser Welded Al–Li Alloys." Materials 11, no. 12 (2018): 2357. http://dx.doi.org/10.3390/ma11122357.

Pełny tekst źródła

Streszczenie:

Autogenous laser welding of 5A90 Al–Li alloy sheets in a butt-joint configuration was carried out in this study. The microstructure characteristics of the weld metal and base metal in the horizontal surface and the transverse section of the welded joints were examined quantitatively using electron back scattered diffraction (EBSD) technique. The results show that the weld metal in the horizontal surface and the transverse section exhibits similar grain structural features including the grain orientations, grain shapes, and grain sizes, whereas distinct differences in the texture intensity and

Style APA, Harvard, Vancouver, ISO itp.

47

Kostrobiy, P. P., Bogdan M. Markovych, and Yuri Suchorski. "Revisiting Local Electric Fields on Close-Packed Metal Surfaces: Theory Versus Experiments." Solid State Phenomena 128 (October 2007): 219–24. http://dx.doi.org/10.4028/www.scientific.net/ssp.128.219.

Pełny tekst źródła

Streszczenie:

An external electrostatic field of the order of a few tens of a volt per nanometer causes significant changes in the electron density distribution near a metal surface. Because of differing electronic distributions and varying responses of electrons to the applied field for various metals, the resulting local field distribution in the close vicinity of the surface should depend on the electronic properties of the particular metal, even for flat surfaces. Field-free and field-modified electron density distributions for different metal surfaces were calculated using the functional integration me

Style APA, Harvard, Vancouver, ISO itp.

48

Asaolu, S. S., and M. F. Asaolu. "Trace Metal Distribution in Nigerian Leafy Vegetables." Pakistan Journal of Nutrition 9, no. 1 (2009): 91–92. http://dx.doi.org/10.3923/pjn.2010.91.92.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Butković, Samir, Emir Šarić, and Muhamed Mehmedović. "Porosity distribution in metal injection molded parts." Advanced Technologies & Materials 46, no. 1 (2021): 7–10. http://dx.doi.org/10.24867/atm-2021-1-002.

Pełny tekst źródła

Streszczenie:

Metal injection molding technology is commonly used in production of small and very complex parts. Residual porosity is unavoidable characteristic of P/M parts, affecting their final properties. During injection molding phase powder-binder separation can occur, causing green density variation through cross section of the part. This behaviour is particularly pronounced as complexity of the parts increases. As a consequence, zones with different density and residual porosity can be seen after sintering. In this regard, porosity and hardness distribution of the sintered ring-shaped part is analys

Style APA, Harvard, Vancouver, ISO itp.

50

Lovisari, L., S. Schindler, and W. Kapferer. "Inhomogeneous metal distribution in the intracluster medium." Astronomy & Astrophysics 528 (March 1, 2011): A60. http://dx.doi.org/10.1051/0004-6361/201015400.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!