Zaloguj się

Gotowe bibliografie tematyczne / Microfabricatin / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Microfabricatin.

Rozprawy doktorskie na temat „Microfabricatin”

Autor: Grafiati

Data publikacji: 31 sierpnia 2024

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Microfabricatin”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Feng, Chunhua. "Microfabrication-compatible synthesis strategies for nanoscale electrocatalysts in microfabricated fuel cell applications /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?CENG%202007%20FENG.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Grebille, Bénédicte. "Photopolymérisation radicalaire contrôlée par ATRP : études mécanistiques, applications en sciences des matériaux et perspectives en microfabrication." Electronic Thesis or Diss., Lyon, École normale supérieure, 2024. http://www.theses.fr/2024ENSL0017.

Pełny tekst źródła

Streszczenie:

Au début du XXème siècle, Giacomo Luigi Ciamician, physico-chimiste, a mis en évidence l'intérêt de recourir à la lumière comme source d'énergie renouvelable pour des réactions chimiques. À la fin du siècle, la découverte de la polymérisation radicalaire contrôlée, notamment l'ATRP (« Atom Transfer Radical Polymerization »), a marqué une avancée majeure dans la chimie des polymères. Cette technique a été largement développée et utilisée dans divers domaines, notamment pour la fonctionnalisation de surfaces à travers l'ATRP amorcée sur surface (« Surface Initiated ATRP », SI-ATRP), offrant ains

Style APA, Harvard, Vancouver, ISO itp.

3

Altay, Gizem. "Towards the development of biomimetic in vitro models of intestinal epithelium derived from intestinal organoids." Doctoral thesis, Universitat de Barcelona, 2018. http://hdl.handle.net/10803/664864.

Pełny tekst źródła

Streszczenie:

Intestinal epithelium is highly specialized tissue organized into crypt-villus units relevant for their effective barrier function and nutrient absorption. In the crypt units reside the proliferative intestinal stem cells (ISCs) that divide and differentiate while migrating along the villi to generate the epithelium. The proliferation, migration and differentiation of ISCs is governed by the tightly controlled spatio-chemical gradients of ISC niche factors; bone morphogenic protein (BMP), wingless/Int (Wnt) and epidermal growth factor (EGF) pathway modulators. In vitro models of the intestinal

Style APA, Harvard, Vancouver, ISO itp.

4

Caballero, Lucas Francesc. "Z-scan methods for ultrashort pulsed laser microprocessing of transparent materials." Doctoral thesis, Universitat de Barcelona, 2019. http://hdl.handle.net/10803/668185.

Pełny tekst źródła

Streszczenie:

The use of femtosecond lasers has recently gained attention as a result of the recognition to Gérard Mourou and Donna Strickland with the award of the Nobel Prize in Physics 2018 "for their method of generating high-intensity, ultra-short optical pulses". The innumerable areas of application of ultrashort laser pulses have not yet been completely explored, but their possibilities for accessing the microworld are considered highly valuable. Following this spirit, the objective of this thesis consisted in proposing and implementing feasible solutions to the challenges involved in the microfab

Style APA, Harvard, Vancouver, ISO itp.

5

Cannon, Andrew Hampton. "Unconventional Microfabrication Using Polymers." Thesis, Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/19845.

Pełny tekst źródła

Streszczenie:

Current microfabrication materials include silicon, a wide variety of metals, dielectrics, and some polymers. Because of the low cost and high processing flexibility that polymers generally have, expanding the use of polymers in microfabrication would benefit the microfabrication community, enabling new routes towards goals such as low-cost 3D microfabrication. This work describes two main unconventional uses of polymers in microfabrication. The first unconventional use is as a carrier material in the self-assembly (SA) of millimeter-scale parts in which functional electronic components a

Style APA, Harvard, Vancouver, ISO itp.

6

Florian, Baron Camilo. "Laser direct-writing for microfabrication." Doctoral thesis, Universitat de Barcelona, 2016. http://hdl.handle.net/10803/400403.

Pełny tekst źródła

Streszczenie:

Digital manufacturing constitutes a real industrial revolution that is transforming the production processes from the early stages of research and development to mass production and marketing. The biggest difference in comparison with old fabrication methods is the possibility to perform changes in the pattern design just by using mouse clicks instead of modifying an already fabricated prototype, which results in faster, cheaper and more efficient fabrication processes. For example, new technologies enabling the production of printed electronic devices on flexible substrates and compatible wit

Style APA, Harvard, Vancouver, ISO itp.

7

Wang, Weihua. "Tools for flexible electrochemical microfabrication /." Thesis, Connect to this title online; UW restricted, 2002. http://hdl.handle.net/1773/9854.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Barham, Oliver M. "Microfabricated Bulk Piezoelectric Transformers." Thesis, University of Maryland, College Park, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10615552.

Pełny tekst źródła

Streszczenie:

<p> Piezoelectric voltage transformers (PTs) can be used to transform an input voltage into a different, required output voltage needed in electronic and electro- mechanical systems, among other varied uses. On the macro scale, they have been commercialized in electronics powering consumer laptop liquid crystal displays, and compete with an older, more prevalent technology, inductive electromagnetic volt- age transformers (EMTs). The present work investigates PTs on smaller size scales that are currently in the academic research sphere, with an eye towards applications including micro-robotics

Style APA, Harvard, Vancouver, ISO itp.

9

Mehregany, Mehran. "Microfabricated silicon electric mechanisms." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14042.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1990.<br>Includes bibliographical references (leaves 151-156).<br>by Mehran Mehregany.<br>Ph.D.

Style APA, Harvard, Vancouver, ISO itp.

10

Griffith, Alun Wyn. "Applications of microfabrication in biosensor technology." Thesis, University of Glasgow, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361768.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Jeffery, Nicholas Toby. "PET radiochemistry on microfabricated devices." Thesis, Imperial College London, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.420892.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Velásquez, García Luis Fernando 1976. "A microfabricated colloid thruster array." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/82201.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Lubratt, Mark Paul. "A voltage-tunable microfabricated accelerometer." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/37497.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Harris, Robert Michael. "Geometric simulation of microfabricated structures." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/11842.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.<br>Includes bibliographical references (p. 295-302).<br>Robert Michael Harris.<br>Ph.D.

Style APA, Harvard, Vancouver, ISO itp.

15

Duan, Xuefeng 1981. "Microfabrication : using bulk wet etching with TMAH." Thesis, McGill University, 2005. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=97942.

Pełny tekst źródła

Streszczenie:

In November 2002 a Microfabrication Lab was established in the physics department of McGill University to support research in nanoscience and technology. At the same time, I arrived at McGill to begin my graduate study. So I was assigned to do research on microfabrication, especially bulk wet etching of silicon using TetraMethyl Ammonium Hydroxide (TMAH).<br>The content of microfabrication is quite broad, and also very useful in both industry and academic. Since our fab is a newly built one and I had no experience in this area before, this thesis mainly included some basic processes in microfa

Style APA, Harvard, Vancouver, ISO itp.

16

DiBartolomeo, Franklin. "HIGH SPEED CONTINUOUS THERMAL CURING MICROFABRICATION SYSTEM." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_theses/105.

Pełny tekst źródła

Streszczenie:

Rapid creation of devices with microscale features is a vital step in the commercialization of a wide variety of technologies, such as microfluidics, fuel cells and self-healing materials. The current standard for creating many of these microstructured devices utilizes the inexpensive, flexible material poly-dimethylsiloxane (PDMS) to replicate microstructured molds. This process is inexpensive and fast for small batches of devices, but lacks scalability and the ability to produce large surface-area materials. The novel fabrication process presented in this paper uses a cylindrical mold with m

Style APA, Harvard, Vancouver, ISO itp.

17

Charlton, Martin David Brian. "Computational design and microfabrication of photonic crystals." Thesis, University of Southampton, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287304.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Zoorob, Majd Elias. "Computational design and microfabrication of photonic quasicrystals." Thesis, University of Southampton, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342813.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Shur, Maiya 1980. "Microfabrication methods for the study of chemotaxis." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/27130.

Pełny tekst źródła

Streszczenie:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.<br>Includes bibliographical references (leaves 59-60).<br>We have developed a system for studying chemotaxis in a microfabricated system. The goal was to develop a system capable of generating spatially and temporally stable concentration gradients of a chemotactic molecule while providing a viable environment for the cell. Numerical models were generated to investigate fluid flow in microchannels for given geometries. Through computational modeling and experimentally-driven iteration of the design, fe

Style APA, Harvard, Vancouver, ISO itp.

20

Tu, Yudi. "Photo Processing and Microfabrication of Graphene Oxide." Kyoto University, 2018. http://hdl.handle.net/2433/232039.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Lund, Jason Matthew. "Advanced Techniques for Carbon Nanotube Templated Microfabrication." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/7769.

Pełny tekst źródła

Streszczenie:

Carbon nanotube templated microfabrication (CNT-M) is a term describing a grouping of processes where carbon nanotubes (CNTs) serve a structural role in the fabrication of a material or device. In its basic form, CNT-M is comprised of two steps: produce a template made from carbon nanotubes and infiltrate the porous template with an additional material. Vertically aligned carbon nanotube (VACNT) templates can be grown to heights ranging from microns to millimeters and lithographically patterned to a desired form. Deposition of an existing thin film material onto a CNT template will coat all te

Style APA, Harvard, Vancouver, ISO itp.

22

Guan, Jingjiao. "Microfabricated particulate devices for drug delivery." Connect to resource, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1118247862.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Ohio State University, 2005.<br>Title from first page of PDF file. Document formatted into pages; contains xxiii, 163 p.; also includes graphics. Includes bibliographical references (p. 118-123). Available online via OhioLINK's ETD Center

Style APA, Harvard, Vancouver, ISO itp.

23

McAllister, Devin Vincent. "Microfabricated needles for transdermal drug delivery." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/11031.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Henry, Sʹebastien. "Microfabricated device for transdermal drug delivery." Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/20707.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Steyn, J. Lodewyk (Jasper Lodewyk) 1976. "A microfabricated ElectroQuasiStatic induction turbine-generator." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/32463.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2005.<br>Includes bibliographical references (p. [263]-268).<br>An ElectroQuasiStatic (EQS) induction machine has been fabricated and has generated net electric power. A maximum power output of 192 [mu]W at 235 krpm has been measured under driven excitation of the six phases. Self excited operation was also demonstrated. Under self-excitation, no external drive electronics are required and sufficient power was produced to dimly light four LED's on two of the six phases. This is believed to be the fir

Style APA, Harvard, Vancouver, ISO itp.

26

Muller, Rikky 1980. "A microfabricated dielectrophoretic micro-organism concentrator." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28393.

Pełny tekst źródła

Streszczenie:

Thesis (M. Eng. and S.B.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, June 2004.<br>"May 2004."<br>Includes bibliographical references (leaves 83-85).<br>This project focuses on the development of a micro-organism concentrator. Pathogen detection, particularly MEMS based detection, is often limited by sample concentration. The proposed concentrator will interface with a pathogen detector. This type of pathogen concentrator can be useful for many kinds of applications including water purification systems, medical applications and biological warf

Style APA, Harvard, Vancouver, ISO itp.

27

Srinivasan, Ravi 1971. "Microfabricated reactors for partial oxidation reactions." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9865.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Mehta, Ankur 1983. "A microfabricated solid oxide fuel cell." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/27050.

Pełny tekst źródła

Streszczenie:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science; and, (S.B.)--Massachusetts Institute of Technology, Dept. of Physics, 2004.<br>Includes bibliographical references (p. 83-85).<br>With the ever-increasing ubiquity of mobile consumer electronic devices comes the rising demand for portable electric power. Current battery technology gives a very modest energy return per weight or volume. Hydrocarbons have a significantly higher energy density, and so fuel conversion systems only need to have several percent efficiency to match and surpa

Style APA, Harvard, Vancouver, ISO itp.

29

Hsing, I.-Ming 1968. "Simulation strategies for microfabricated chemical systems." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/10061.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Lin, Chia-Hua. "A Microfabricated Deep Brain Stimulation Electrode." Case Western Reserve University School of Graduate Studies / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=case1244061398.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Gao, Yuanfang. "Microfabricated devices for single cell analysis." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4429.

Pełny tekst źródła

Streszczenie:

Thesis (Ph.D.)--University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on May 1, 2009) Vita. Includes bibliographical references.

Style APA, Harvard, Vancouver, ISO itp.

32

Stillman, Janet Allyn. "Three-dimensional microfabrication with laser-patterned photostructurable glass." Diss., Restricted to subscribing institutions, 2008. http://proquest.umi.com/pqdweb?did=1779690371&sid=28&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Cantarella, Giuseppe. "Design, microfabrication and characterisation of Photonic Integrated Circuits." Thesis, University of Strathclyde, 2017. http://digitool.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=28500.

Pełny tekst źródła

Streszczenie:

This doctoral dissertation deals with the design, fabrication and characterization of state-of-the-art Photonic Integrated Circuits (PICs) for non-linear applications. Silicon PICs is a technology mainly used for application in telecommunications and quantum optics. The strong third order non-linearity of silicon makes it also attractive for non-linear PIC design. In FWM applications, SOI technology can be used not only for non-linear generation but also to fabricate photonic filters to remove the residual pump. This thesis deals with three requirements for the realisation of on-chip FWM optic

Style APA, Harvard, Vancouver, ISO itp.

34

Song, Mi Yeon. "Microfabrication of silicon tips for scanning probe microscopy." Thesis, University of Birmingham, 2009. http://etheses.bham.ac.uk//id/eprint/482/.

Pełny tekst źródła

Streszczenie:

This thesis investigates the microfabrication of silicon tips for Scanning Probe Microscopy. First, a microfabrication process was developed to produce silicon tips over 100 um height with a sharp apex of ~10–20 nm. To prevent inadvertent contact between the substrate bearing the tip and the sample being probed, the tip is elevated on a mesa structure. Atomic resolution STM images of graphite are successfully obtained using silicon tips. Subsequently, a co-axial tip was developed for SPELS. SPELS uses an STM tip in field emission mode and then analyses the energy of electrons backscattered. Ho

Style APA, Harvard, Vancouver, ISO itp.

35

Hastings, Abel Z. 1973. "Assessing the viability of various metallic microfabrication techniques." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/8460.

Pełny tekst źródła

Streszczenie:

Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2002.<br>Includes bibliographical references (p. 85-89).<br>An investigation was completed to assess the viability of a group of metallic microfabrication techniques aimed at the production of microelectromechanical systems (MEMS) This undertaking was done to show which methods hold the most promise for the near future. The methods investigated include LIGA, micromilling, jet molding, three dimensional printing, microcasting, micro-injection molding, metal injection molding, Microforming, and mi

Style APA, Harvard, Vancouver, ISO itp.

36

Britton, Joe. "Microfabrication techniques for trapped ion quantum information processing." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3337078.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Boyer, Nathan Edward. "Microfabrication with Smooth, Thin CNT/Polymer Composite Sheets." BYU ScholarsArchive, 2016. https://scholarsarchive.byu.edu/etd/5923.

Pełny tekst źródła

Streszczenie:

Carbon nanotube (CNT)/polymer composite sheets can be extremely high strength and lightweight, which makes them attractive for fabrication of mechanical structures. This thesis demonstrates a method whereby smooth, thin CNT/polymer composite sheets can be fabricated and patterned on the microscale using a process of photolithography and plasma etching. CNT/polymer composites were made from CNTs grown using chemical vapor deposition using supported catalyst growth and floating catalyst growth. The composite sheets had a roughness of approximately 30nm and were about 61¼m or 261¼m depending on w

Style APA, Harvard, Vancouver, ISO itp.

38

Ghio, Simone. "Design and microfabrication of multifunctional bio-inspired surfaces." Doctoral thesis, Università degli studi di Trento, 2018. https://hdl.handle.net/11572/367604.

Pełny tekst źródła

Streszczenie:

In this thesis, we used CMOS-like technologies to produce improved, hierarchical multifunctional bioinspired surfaces. Different natural surfaces have been surveyed including well-known lotus leaf, sharkskin, back of the Namib Desert beetle, butterfly wings, and legs of water-walking insects. The lotus leaf features superhydrophobicity, which leads to low adhesion and self-cleaning. Sharkskin is composed of ripples that manage to reduce skin-friction and thus drag resistance. The Namib Desert beetle, harvests water from the heterogeneous pattern having hydrophilic/hydrophobic bumps on his back

Style APA, Harvard, Vancouver, ISO itp.

39

Ghio, Simone. "Design and microfabrication of multifunctional bio-inspired surfaces." Doctoral thesis, University of Trento, 2018. http://eprints-phd.biblio.unitn.it/2854/1/Thesis_GHIO_S..pdf.

Pełny tekst źródła

Streszczenie:

In this thesis, we used CMOS-like technologies to produce improved, hierarchical multifunctional bioinspired surfaces. Different natural surfaces have been surveyed including well-known lotus leaf, sharkskin, back of the Namib Desert beetle, butterfly wings, and legs of water-walking insects. The lotus leaf features superhydrophobicity, which leads to low adhesion and self-cleaning. Sharkskin is composed of ripples that manage to reduce skin-friction and thus drag resistance. The Namib Desert beetle, harvests water from the heterogeneous pattern having hydrophilic/hydrophobic bumps on his back

Style APA, Harvard, Vancouver, ISO itp.

40

Yang, Yanyin. "Synthesis, characterization, microfabrication and biological applications of conducting polymers." Connect to resource, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1127316668.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Ohio State University, 2005.<br>Title from first page of PDF file. Document formatted into pages; contains xv, 192 p.; also includes graphics (some col.). Includes bibliographical references (p. 183-192). Available online via OhioLINK's ETD Center

Style APA, Harvard, Vancouver, ISO itp.

41

Chien, Hsin-I. "Microfabrication of barium strontium titanate BaxSr(1-x)TiO3." Thesis, London South Bank University, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.618692.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Forsberg, Pontus. "Diamond Microfabrication for Applications in Optics and Chemical Sensing." Doctoral thesis, Uppsala universitet, Mikrosystemteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-192567.

Pełny tekst źródła

Streszczenie:

Diamond is a material with many exceptional properties. In this thesis methods for fabrication of microstructures as well as several applications of such structures in optics, microfluidics and electrochemistry are presented. A method for etching deep and highly precise gratings is described. This method was used to fabricate circularly symmetric half wave plates for use in vector vortex coronagraphs. Such coronagraphs are a very promising approach to the direct imaging of extrasolar planets. By varying the lateral etch rate of the aluminum mask during diamond etching in an inductively coupled

Style APA, Harvard, Vancouver, ISO itp.

43

Sterling, Robin C. "Ytterbium ion trapping and microfabrication of ion trap arrays." Thesis, University of Sussex, 2012. http://sro.sussex.ac.uk/id/eprint/39684/.

Pełny tekst źródła

Streszczenie:

Over the past 15 years ion traps have demonstrated all the building blocks required of a quantum computer. Despite this success, trapping ions remains a challenging task, with the requirement for extensive laser systems and vacuum systems to perform operations on only a handful of qubits. To scale these proof of principle experiments into something that can outperform a classical computer requires an advancement in the trap technologies that will allow multiple trapping zones, junctions and utilize scalable fabrication technologies. I will discuss the construction of an ion trapping experiment

Style APA, Harvard, Vancouver, ISO itp.

44

Losey, Matthew W. "Novel multiphase chemical reaction systems enabled by microfabrication technology." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8634.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, 2001.<br>Includes bibliographical references (p. 237-251).<br>Advances in MEMS (micro-electromechanical systems) have enabled some of the "Lab-on-a-Chip" technologies and microfluidics that are pervasive in many of the current developments in analytical chemistry and molecular biology. Coinciding with this effort in micro-analytics has been research in chemical process miniaturization -- reducing the characteristic length scale of the unit operation to improve heat and mass transfer, and ultimately process p

Style APA, Harvard, Vancouver, ISO itp.

45

Ge, Yufei S. M. Massachusetts Institute of Technology. "Microfabrication of surface electrode ion traps for quantum manipulation." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99280.

Pełny tekst źródła

Streszczenie:

Thesis: S.M., Massachusetts Institute of Technology, Department of Physics, 2015.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 123-132).<br>Trapped ions are a promising approach to quantum computation. This approach uses a qubit state which is the atomic state and quantum motional state of a trapped ion to encode information, and uses laser-ion interactions to manipulate the qubit state. A major obstacle to the realization of a practical ion trap quantum computer is decoherence. In trapped ion quantum computation experiments, decoherence is dominated b

Style APA, Harvard, Vancouver, ISO itp.

46

Wasley, Thomas J. "Digitally driven microfabrication of 3D multilayer embedded electronic systems." Thesis, Loughborough University, 2016. https://dspace.lboro.ac.uk/2134/23237.

Pełny tekst źródła

Streszczenie:

The integration of multiple digitally driven processes is seen as the solution to many of the current limitations arising from standalone Additive Manufacturing (AM) techniques. A technique has been developed to digitally fabricate fully functioning electronics using a unique combination of AM technologies. This has been achieved by interleaving bottom-up Stereolithography (SL) with Direct Writing (DW) of conductor materials alongside mid-process development (optimising the substrate surface quality), dispensing of interconnects, component placement and thermal curing stages. The resulting pro

Style APA, Harvard, Vancouver, ISO itp.

47

Le, Van Suu Thierry. "Etude analytique, conception et microfabrication de microphones capacitifs miniatures." Le Mans, 2008. http://cyberdoc.univ-lemans.fr/theses/2008/2008LEMA1016.pdf.

Pełny tekst źródła

Streszczenie:

Au cours de la dernière décennie, les capteurs capacitifs de pression acoustique fabriqués sur puce silicium, ont fait l'objet d'études théoriques, expérimentales et technologiques, de manière à réaliser des microphones miniatures qui présentent de l'intérêt dans de nombreuses applications. Ces études ont été menées plus particulièrement sur les systèmes d'architectures conventionnelles, c'est à dire sur la modélisation et la microfabrication de dispositifs qui comportent un diaphragme (considéré comme une membrane), une électrode arrière plane (perforée ou non), et une couche de fluide visque

Style APA, Harvard, Vancouver, ISO itp.

48

Hou, Linlin. "Advanced 3D Microfabrication and Demonstration of Arrayed Electrowetting Microprisms." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1328546291.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Peeni, Bridget A. "Microfabrication and evaluation of planar thin-film microfluidic devices /." Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1564.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Le, Van Suu Thierry Bruneau Michel Durand Stéphane. "Etude analytique, conception et microfabrication de microphones capacitifs miniatures." [S.l.] : [s.n.], 2008. http://cyberdoc.univ-lemans.fr/theses/2008/2008LEMA1016.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!