Zaloguj się

Gotowe bibliografie tematyczne / Modeling of the Base Isolators / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Modeling of the Base Isolators.

Rozprawy doktorskie na temat „Modeling of the Base Isolators”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Modeling of the Base Isolators”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Ardic, Halil. "Design And Modeling Elastomeric Vibration Isolators Using Finite Element Method." Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615684/index.pdf.

Pełny tekst źródła

Streszczenie:

In this thesis, a process is developed for designing elastomeric vibration isolators in order to provide vibration isolation for sensitive equipment being used in ROKETSAN A.S.&rsquo<br>s products. For this purpose, first of all, similar isolators are examined in the market. After that, appropriate elastomeric materials are selected and their temperature and frequency dependent dynamic properties are experimentally obtained. Parametric finite element model of the isolator is then constituted in ANSYS APDL using the properties of elastomeric materials and the conceptual design of the isolator.

Style APA, Harvard, Vancouver, ISO itp.

2

Zinnecker, Alicia M. "Modeling for Control Design of an Axisymmetric Scramjet Engine Isolator." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1354215841.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Hernandez, Manuel A. "A decision support system for the optimal design of base-motion isolators." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03sep%5FHernandez.pdf.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Mechanical Engineering and M.S. in Information Technology Management)--Naval Postgraduate School, September 2003.<br>Thesis advisor(s): Joshua Gordis, Dan Boger. Includes bibliographical references (p. 85-86). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

4

V, K. Thalakkatukalathil Vinod. "Electromagnetic modeling and characterization of anisotropic ferrite materials for microwave Isolators/Circulators." Thesis, Brest, 2017. http://www.theses.fr/2017BRES0134/document.

Pełny tekst źródła

Streszczenie:

Les circulateurs et les isolateurs à ferrite sont couramment utilisés dans l’électronique hyperfréquence en raison de leur forte résistivité électrique et de leur aimantation spontanée élevée. La conception et l’optimisation des dispositifs micro-ondes à ferrites nécessitent d’une part la connaissance de leurs propriétés dynamiques, permittivité complexe et tenseur de perméabilité, et d’autre part le contrôle de la propagation de l’onde électromagnétique (EM) qui conditionne leurs performances. Les logiciels commerciaux de simulation utilisent différents modèles théoriques pour décrire le tens

Style APA, Harvard, Vancouver, ISO itp.

5

Kässi, Jonna. "Modeling of Base Oil Blends." Thesis, KTH, Skolan för kemivetenskap (CHE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-90704.

Pełny tekst źródła

Streszczenie:

Nynas AB is a company that refines oil for different applications such as insulating oils for the electrical industry and base oils for both the lubricant and chemical industry. Different types of base oils are produced for the lubricant industry in order to provide required properties such as good viscosity, solvency, volatility, etc. But sometimes, the oils produced in the refineries (known as “straight cut” oils) do not have the all properties required by a customer, and a way for achieving those properties is to blend different straight cut base oils. To save money and time, empirical co

Style APA, Harvard, Vancouver, ISO itp.

6

Edalath, Sanooj Sadique. "Fuzzy Logic Seismic Vibration Control of Buildings." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1335462916.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Xiang, Haiou. "BLUETOOTH-BASE WORM MODELING AND SIMULATION." Master's thesis, University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2669.

Pełny tekst źródła

Streszczenie:

Bluetooth is one of the most popular technologies in the world in the new century. Meanwhile it attracts attackers to develop new worm and malicious code attacking Bluetooth wireless network. So far the growth of mobile malicious code is very fast and they have become a great potential threat to our society. In this thesis, we study Bluetooth worm in Mobile Wireless Network. Firstly we investigate the Bluetooth technology and several previously appeared Bluetooth worms, e.g. "Caribe","Comwar", and we find the infection cycle of a Bluetooth worm. Next, we develop a new simulator, Bluetooth Worm

Style APA, Harvard, Vancouver, ISO itp.

8

KASHAYI, NAGARAJU C. "MODELING BASE CRASH RATES FOR INTERSECTIONS." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1163775240.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Thaijaroen, Woothichai. "Nonlinear dynamic modelling of rubber isolators using six parameters based on parabolic spring, springpot, and smooth-slip friction element." Thesis, University of Bristol, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.492630.

Pełny tekst źródła

Streszczenie:

A time-domain six-parameter model is adopted to simulate the vibration behaviour of various rubber-isolators at constant temperature and preload over the frequency range of 0.05-25 Hz. The model consists of three components based on a nonlinear parabolic spring, a fractional-derivative-based springpot, and a smooth-slip friction element. The adopted mode working in one-dimensional manner is capable of generating force as a function of displacement.

Style APA, Harvard, Vancouver, ISO itp.

10

Song, Jin E. "Hierarchical multiscale modeling of Ni-base superalloys." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/34855.

Pełny tekst źródła

Streszczenie:

Ni-base superalloys are widely used in hot sections of gas turbine engines due to the high resistance to fatigue and creep at elevated temperatures. Due to the demands for improved performance and efficiency in applications of the superalloys, new and improved higher temperature alloy systems are being developed. Constitutive relations for these materials need to be formulated accordingly to predict behavior of cracks at notches in components under cyclic loading with peak dwell periods representative of gas turbine engine disk materials. Since properties are affected by microstructure at var

Style APA, Harvard, Vancouver, ISO itp.

11

Yuk, Shun-cho Jacky, and 郁順祖. "Adaptive video defogging base on background modeling." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hdl.handle.net/10722/208174.

Pełny tekst źródła

Streszczenie:

The performance of intelligent video surveillance systems is always degraded under complicated scenarios, like dynamic changing backgrounds and extremely bad weathers. Dynamic changing backgrounds make the foreground/background segmentation, which is often the first step in vision-based algorithms, become unreliable. Bad weathers, such as foggy scenes, not only degrade the visual quality of the monitoring videos, but also seriously affect the accuracy of the vision-based algorithms. In this thesis, a fast and robust texture-based background modeling technique is first presented for tackling t

Style APA, Harvard, Vancouver, ISO itp.

12

VASISHT, GAURAV. "MODELING BASE ACCIDENT RATE/DENSITY USING NEURAL NETWORKS." University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1037645154.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Hanna, Brandon Holbrook. "Modeling and Testing of Bistable Waterbomb Base Configurations." BYU ScholarsArchive, 2014. https://scholarsarchive.byu.edu/etd/4336.

Pełny tekst źródła

Streszczenie:

Origami is making an impact in engineering as solutions to problems are being found by applying origami principles (eg. flat-foldability) and using specific crease patterns as inspiration. This thesis presents an in-depth analysis of a particular origami fold -- the waterbomb base -- to facilitate its use in future engineering problems. The watebomb base is of interest due to its familiarity to the origami community, simple topology (can be made by folding a single sheet of paper four times), scalability, generalizability, and interesting kinetic behavior. It can behave as a nonlinear spring a

Style APA, Harvard, Vancouver, ISO itp.

14

Shenoy, Mahesh M. "Constitutive Modeling and Life Prediction in Ni-Base Superalloys." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/11515.

Pełny tekst źródła

Streszczenie:

Microstructural features at different scales affect the constitutive stress-strain response and the fatigue crack initiation life in Ni-base superalloys. While numerous efforts have been made in the past to experimentally characterize the effects of these features on the stress-strain response and/or the crack initiation life, there is a significant variability in the data with sometimes contradictory conclusions, in addition to the substantial costs involved in experimental testing. Computational techniques can be useful tools to better understand these effects since they are relatively inex

Style APA, Harvard, Vancouver, ISO itp.

15

Zhang, Fengdong. "Distributed database and knowledge base modeling for concurrent design." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ65016.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Moore, Zachary Joseph. "Life modeling of notched CM247LC DS nickel-base superalloy." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24813.

Pełny tekst źródła

Streszczenie:

Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2008.<br>Committee Chair: Dr. Richard W. Neu; Committee Member: Dr. David L. McDowell; Committee Member: Dr. W. Steven Johnson.

Style APA, Harvard, Vancouver, ISO itp.

17

Ozturk, UtkuDeniz. "Hot forming behavior of ni-base superalloys and their modeling." Doctoral thesis, TDX (Tesis Doctorals en Xarxa), 2019. http://hdl.handle.net/10803/668525.

Pełny tekst źródła

Streszczenie:

Numerical and experimental simulation of engineering materials has been an emerging topic for recent decades. Reliable and efficient numerical simulations are only possible through correct and pragmatic modeling approaches. This Ph.D. work is focused on understanding and modeling the hot forming behavior of polycrystalline superalloys. In other words, this is an attempt to comprehend and model the deformation characteristics and microstructural evolution of these alloys during hot forming. Understanding the hot forming behavior of such alloys is of interest from an industrial perspective due

Style APA, Harvard, Vancouver, ISO itp.

18

Ibanez, Alejandro R. "Modeling creep behavior in a directionally solidified nickel base superalloy." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/5353.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Gordon, Ali Page. "Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/10468.

Pełny tekst źródła

Streszczenie:

Combustion gas turbine components designed for application in power generation equipment are subject to periodic replacement as a result of cracking, damage, and mechanical property degeneration that render them unsafe for continued operation. In view of the significant costs associated with inspecting, servicing, and replacing damaged components, there has been much interest in developing models that not only predict service life, but also estimate the evolved state of the material. This thesis explains manifestations of microstructural damage mechanisms that facilitate fatigue crack nucleati

Style APA, Harvard, Vancouver, ISO itp.

20

Ibañez, Alejandro R. "Modeling creep behavior in a directionally solidified nickel base superalloy." Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-04072004-180026/unrestricted/ibanez%5Falejandro%5Fr%5F200312%5Fphd.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Neal, Sean Douglas. "Reduced order constitutive modeling of a directionally-solidified nickel-base superalloy." Thesis, Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/51735.

Pełny tekst źródła

Streszczenie:

Hot section components of land-based gas turbines are subject to extremely harsh, high temperature environments and require the use of advanced materials. Directionally solidified Ni-base superalloys are often chosen as materials for these hot section components due to their excellent creep resistance and fatigue properties at high temperatures. These blades undergo complex thermomechanical loading conditions throughout their service life, and the influences of blade geometry and variable operation can make life prediction difficult. Accurate predictions of material response under thermomechan

Style APA, Harvard, Vancouver, ISO itp.

22

Mahaffey, David. "Inertia Friction Welded Ni-Base Superalloys: Process Examination, Modeling and Microstructure." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1462525317.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Kyler, Brent J. "Forecast modeling for estimating Base Realignment & Closure (BRAC) environmental restoration costs." Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA341040.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Financial Management) Naval Postgraduate School, December 1997.<br>"December 1997." Thesis advisor(s): John E. Mutty, Shu S. Liao. Includes bibliographical references (p. 135-138). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

24

Bassett, Julien. "Thermochemical modeling of composite materials for base substrate applications in microelectronic systems." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/18211.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Huskins, James M. "Issues in expanding the Software Base Management System Supporting the Computer Aided Prototyping System." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://edocs.nps.edu/npspubs/scholarly/theses/1990/Jun/90Jun%5FHuskins.pdf.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Computer Science)--Naval Postgraduate School, June 1990.<br>Thesis Advisor(s): Luqi. Second Reader: Berzins, Valdis. "June 1990." Description based on title screen as viewed on March 23, 2010. Author(s) subject terms: Rapid Prototyping, Models, Programming Languages, Domain Analysis, Object-oriented Database, Software Reuse. Includes bibliographical references (p. 96-99). Also available in print.

Style APA, Harvard, Vancouver, ISO itp.

26

Kim, Byung-ki. "Smart Base Station Antenna Performance for Several Scenarios - an Experimental and Modeling Investigation." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/11043.

Pełny tekst źródła

Streszczenie:

Smart antenna systems are employed to overcome multipath fading, extend range, and increase capacity by using diversity or beamforming techniques in wireless communication systems. Understanding of the smart base antenna performance mechanisms for various environments is important to design cost effective systems and network. This dissertation focuses on the experimental characterization and modeling of the smart base station antenna performance for various propagation environment scenarios. An eight-channel Virginia Tech smart base station antenna testbed was developed to investigate per

Style APA, Harvard, Vancouver, ISO itp.

27

Noureldin, Ehab Magdy Salah. "Analysis on Structural Modeling for Recycled Asphalt Pavement used as a Base Layer." Diss., North Dakota State University, 2015. http://hdl.handle.net/10365/25320.

Pełny tekst źródła

Streszczenie:

Reusing RAP in the base layer became a common practice in the last decade. However, some crucial issues must be resolved to succeed in using RAP satisfying the standard specifications as a base layer. The most important unknown factor is the mechanistic behavior of RAP. This question may be satisfied by understanding the role of RAP in terms of whether it just behaves as a black rock or has a stabilizing effect with traditional aggregates used for base layer. The first stage of this study is modeling the structural behavior of RAP via prediction MR. This stage then comprises comparing the pred

Style APA, Harvard, Vancouver, ISO itp.

28

Smirnov, Eugeny, Sergei Burukhin, and Irina Smirnova. "Visual Modeling of Integrated Constructs in Mathematics As the Base of Future Teacher Creativity." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-80943.

Pełny tekst źródła

Streszczenie:

Visual modeling concept of integrated constructs (essence) of mathematical objects in teacher training of humanistic area is presented as technology of education in problem solving. The main goal of innovative approach is student’s activity in mathematics on generating of concrete essence manifestations on concepts, methods, theorems, algorithms, procedures and so on. Such student’s activity should be: · Success in an area of actual interests and person’s experience and reached by perception; · Have high level of variability in visual modeling; · Success in domain of reflection process stim

Style APA, Harvard, Vancouver, ISO itp.

29

Rekleitis, Georgios. "Modeling and evaluation of a new parallel mechanism as a flight simulator motion base." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=80137.

Pełny tekst źródła

Streszczenie:

In this thesis, a novel 6 degree-of-freedom parallel mechanism is evaluated as a flight simulator motion base. The mechanism consists of three fixed-length legs, each supported by a three-wheeled mobile robot. The three legs support a platform, which acts as the end-effector of the mechanism. Thus, the mechanism has the advantage of portability and simple design, because of the specific actuating system. Two different designs are evaluated: one with ball joints at the upper ends of the legs and revolute joints at the lower ends and one with the opposite configuration. The inverse kinema

Style APA, Harvard, Vancouver, ISO itp.

30

Grekula, V. (Veikka). "Service-oriented approach in base transceiver station platform software design utilizing domain-specific modeling." Master's thesis, University of Oulu, 2018. http://urn.fi/URN:NBN:fi:oulu-201803031293.

Pełny tekst źródła

Streszczenie:

Software (SW) systems are becoming more and more complex due to the need of functionalities in the systems. In the component-based SW design approach, the software is modeled as software components and these components are becoming too extensive to be able to model a SW feature efficiently. A service-based approach can offer an alternative for solving the rising problem of an inefficiency among the component-based SW modeling. Instead of being responsible for the different SW components, in the service-based approach, the SW functionalities are divided into one or more services and further int

Style APA, Harvard, Vancouver, ISO itp.

31

Riggs, Bryan E. "MULTI-SCALE COMPUTATIONAL MODELING OF NI-BASE SUPERALLOY BRAZED JOINTS FOR GAS TURBINE APPLICATIONS." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1492631613686228.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Wildofsky, Jacob. "Multi-Scale Computational Modeling of Ni-Base Superalloy Brazed Joints for Gas Turbine Applications." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1574809064215922.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Zaragoza, Rios Jaime Alberto. "Declarative modeling based on knowledge." Toulouse 3, 2009. http://thesesups.ups-tlse.fr/778/.

Pełny tekst źródła

Streszczenie:

Les nouvelles technologies de l'image 3D permettent la création de mondes virtuels et des créatures qui les peuplent avec un tel niveau de détails, que pour les effets spéciaux de cinéma, il est difficile de distinguer les éléments sont générés par ordinateur. Cependant, cette technologie est dans les mains habiles de designers, artistes et programmeurs, pour lesquels il faut des semaines à plusieurs années pour se former aux outils et obtenir ces résultats. La Modélisation Déclarative est une méthode qui permet de créer des modèles en fournissant les propriétés donnant la description des comp

Style APA, Harvard, Vancouver, ISO itp.

34

Ayala, Ferran A. (Ferran Alberto) 1976. "Data base generation and modeling of Homogeneous Charge Compression Ignition using a rapid compression machine." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/88882.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Bartsch, Kevin P. "Modeling Soil Loss to Determine Water Erosion Risk at Camp Williams National Guard Base, Utah." DigitalCommons@USU, 1998. https://digitalcommons.usu.edu/etd/3656.

Pełny tekst źródła

Streszczenie:

Soil erosion was assessed at Camp Williams National Guard Base by creating an erosion risk classification map and comparing the erosion impact of disturbance regimes on different hillslopes. Soil erosion does not appear to be a problem for most of Camp Williams. The Revised Universal Soil Loss Equation was applied using GIS to create a soil erosion risk map for the entire Camp Williams facility. The map indicated where problem areas occurred and showed relative erosion risk, but its lack of quantitative accuracy should be noted. Areas of concern included landscapes with little or no protective

Style APA, Harvard, Vancouver, ISO itp.

36

Kanso, Bilal. "Modeling and testing of component-based systems." Thesis, Châtenay-Malabry, Ecole centrale de Paris, 2011. http://www.theses.fr/2011ECAP0050/document.

Pełny tekst źródła

Streszczenie:

La thèse s’inscrit dans le domaine de la modélisation et de la validation des systèmes modernes complexes. Les systèmes actuels sont en fait d’une complexité sans cesse croissante et formés de plus en plus de composants de natures différentes. Ceci rend leur processus de conception et de validation coûteux et difficile. Il semble être la simple façon permettant de faire face à cette hétérogénéité et à cette complexité est l’approche orientée composant. Suivant cette approche, le système est une entité formée par un ensemble des composants interconnectés. Les composants définissent une interfac

Style APA, Harvard, Vancouver, ISO itp.

37

Linder, Martin. "DC Parameter Extraction and Modeling of Bipolar Transistors." Doctoral thesis, KTH, Microelectronics and Information Technology, IMIT, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3172.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Le, Xuan Tuan. "Understanding complex systems through computational modeling and simulation." Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEP003.

Pełny tekst źródła

Streszczenie:

Les approches de simulation classiques ne sont en général pas adaptées pour traiter les aspects de complexité que présentent les systèmes complexes tels que l'émergence ou l'adaptation. Dans cette thèse, l'auteur s'appuie sur ses travaux menés dans le cadre d'un projet de simulation sur l’épidémie de grippe en France associée à des interventions sur une population en considérant le phénomène étudié comme un processus diffusif sur un réseau complexe d'individus, l'originalité réside dans le fait que la population y est considérée comme un système réactif. La modélisation de tels systèmes nécess

Style APA, Harvard, Vancouver, ISO itp.

39

Amaro, Robert L. "Thermomechanical fatigue crack formation in a single crystal Ni-base superalloy." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/37172.

Pełny tekst źródła

Streszczenie:

This research establishes a physics-based life determination model for the second generation single crystal superalloy PWA 1484 experiencing out-of-phase thermomechanical fatigue (TMF). The life model was developed as a result of a combination of critical mechanical tests, dominant damage characterization and utilization of well-established literature. The resulting life model improves life prediction over currently employed methods and provides for extrapolation into yet unutilized operating regimes. Particularly, the proposed deformation model accounts for the materials' coupled fatigue-envi

Style APA, Harvard, Vancouver, ISO itp.

40

Clements, Joshua Ryan. "The Experimental Testing of an Active Magnetic Bearing/Rotor System Undergoing Base Excitation." Thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/35827.

Pełny tekst źródła

Streszczenie:

Active Magnetic Bearings (AMB) are a relatively recent innovation in bearing technology. Unlike conventional bearings, which rely on mechanical forces originating from fluid films or physical contact to support bearing loads, AMB systems utilize magnetic fields to levitate and support a shaft in an air-gap within the bearing stator. This design has many benefits over conventional bearings. The potential capabilities that AMB systems offer are allowing this new technology to be considered for use in state-of-the-art applications. For example, AMB systems are being considered for use in jet

Style APA, Harvard, Vancouver, ISO itp.

41

Yongsiriwit, Karn. "Modeling and mining business process variants in cloud environments." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLL002/document.

Pełny tekst źródła

Streszczenie:

De plus en plus les organisations adoptent les systèmes d'informations sensibles aux processus basés sur Cloud en tant qu'un environnement pour gérer et exécuter des processus dans le Cloud dans l'objectif de partager et de déployer leurs applications de manière optimale. Cela est particulièrement vrai pour les grandes organisations ayant des succursales opérant dans des différentes régions avec des processus considérablement similaires. Telles organisations doivent soutenir de nombreuses variantes du même processus en raison de la culture locale de leurs succursales, de leurs règlements, etc.

Style APA, Harvard, Vancouver, ISO itp.

42

Fromm, Bradley S. "Linking phase field and finite element modeling for process-structure-property relations of a Ni-base superalloy." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45789.

Pełny tekst źródła

Streszczenie:

Establishing process-structure-property relationships is an important objective in the paradigm of materials design in order to reduce the time and cost needed to develop new materials. A method to link phase field (process-structure relations) and microstructure-sensitive finite element (structure-property relations) modeling is demonstrated for subsolvus polycrystalline IN100. A three-dimensional (3D) experimental dataset obtained by orientation imaging microscopy performed on serial sections is utilized to calibrate a phase field model and to calculate inputs for a finite element analysis

Style APA, Harvard, Vancouver, ISO itp.

43

Zimmerman, Cory Tyler. "Performance Analysis and Modeling of Pavements with a Cold Central Plant Recycled Base under Accelerated Loading Testing." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/79131.

Pełny tekst źródła

Streszczenie:

Cold Central Plant Recycling (CCPR) has been used by many state highway agencies to save material, money, time, and energy in pavement construction and rehabilitation. The objectives of this thesis were to: (1) perform an instrumented verification analysis, (2) evaluate the response and performance of two pavement configurations with a CCPR base layer through accelerated pavement testing (APT), and (3) construct models using mechanistic-empirical pavement design software for comparison with the APT results. The pavement configurations featured a 5-inch CCPR mixture with either a 3-inch or 1.

Style APA, Harvard, Vancouver, ISO itp.

44

Lino, Christophe. "Contrôle de caméra virtuelle à base de partitions spatiales dynamiques." Phd thesis, Université Rennes 1, 2013. http://tel.archives-ouvertes.fr/tel-00916128.

Pełny tekst źródła

Streszczenie:

Le contrôle de caméra virtuelle est aujourd'hui un composant essentiel dans beaucoup d'applications d'infographie. Malgré cette importance, les approches actuelles restent limitées en terme d'expressivité, d'interactivité et de performances. Typiquement, les éléments de style ou de genre cinématographique sont difficiles à modéliser et à simuler dû à l'incapacité des systèmes actuels de calculer simultanément des points de vues, des trajectoires et d'effectuer le montage. Deuxièmement, elles n'explorent pas assez le potentiel créatif offert par le couplage potentiel d'un humain et d'un système

Style APA, Harvard, Vancouver, ISO itp.

45

Kirka, Michael. "Thermomechanical behavior of a directionally solidified nickel-base superalloys in the aged state." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/53458.

Pełny tekst źródła

Streszczenie:

Understanding the effects of aged microstructures on the thermomechanical fatigue (TMF) properties of nickel-base (Ni-base) superalloys remains unclear. Few experimental results are currently available in this area, and of the limited results available, some promote aged microstructures as beneficial, while others as detri- mental. The importance of these aged structures arises from the fact that when components used in the hot sections of gas turbine engines remain in service for ex- tended periods of time, the local temperature and stress provides the catalyst for the evolution of the micros

Style APA, Harvard, Vancouver, ISO itp.

46

Bellet, Thomas. "Transformations de graphes pour la modélisation géométrique à base topologique." Thesis, Poitiers, 2012. http://www.theses.fr/2012POIT2261/document.

Pełny tekst źródła

Streszczenie:

De nombreux domaines comme le jeu vidéo, l’architecture, l’ingénierie ou l’archéologie font désormais appel à la modélisation géométrique. Les objets à représenter sont de natures diverses, et leurs opérations de manipulation sont spécifiques. Ainsi, les modeleurs sont nombreux car tous spécialisés à leur domaine d’application. Or ils sont à la fois chers à développer, souvent peu robustes, et difficilement extensibles. Nous avons proposé dans la thèse l’approche alternative suivante :– fournir un langage dédié à la modélisation qui permet de définir les opérations quelque soit le domaine d’ap

Style APA, Harvard, Vancouver, ISO itp.

47

Chalermwisutkul, Suramate. "Large signal modeling of GaN HEMTs for UMTS base station power amplifier design taking into account memory effects." [S.l.] : [s.n.], 2007. http://deposit.ddb.de/cgi-bin/dokserv?idn=984082980.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Berger, Benjamin [Verfasser], Boris [Akademischer Betreuer] Lohmann, and Clemens [Akademischer Betreuer] Gühmann. "Modeling and Optimization for Stationary Base Engine Calibration / Benjamin Berger. Gutachter: Clemens Gühmann ; Boris Lohmann. Betreuer: Boris Lohmann." München : Universitätsbibliothek der TU München, 2012. http://d-nb.info/1031514368/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Upadhyay, Devesh. "Modeling and model base control design of the VGT-EGR system for intake flow regulation in diesel engines /." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486400446370507.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Caldwell, Eric Christopher. "A new method for the modeling of elemental segregation behavior and partitioning in single crystal nickel base superalloys." [Gainesville, Fla.] : University of Florida, 2004. http://purl.fcla.edu/fcla/etd/UFE0006302.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!