Zaloguj się

Gotowe bibliografie tematyczne / OEM (Original Equipment Manufacturer) / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: OEM (Original Equipment Manufacturer).

Artykuły w czasopismach na temat „OEM (Original Equipment Manufacturer)”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „OEM (Original Equipment Manufacturer)”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Fuaidah, Uzlifatul, Umi Chotijah, and Henny Dwi Bhakti. "APLIKASI PENDUKUNG KEPUTUSAN OEM ( ORIGINAL EQUIPMENT ) MENGGUNAKAN METODE FUZZY MCDM PADA PT LANGGENG BUANA JAYA." Indexia 3, no. 1 (2021): 26. http://dx.doi.org/10.30587/indexia.v3i1.2900.

Pełny tekst źródła

Streszczenie:

OEM atau Original Equipment Manufacturer adalah sebuah barang yang diproduksi oleh perusahaan yang kemudian dijual kembali oleh perusahaan lain yang bekerja sama dengan penjual produk jadi, yang dikenal sebagai Vendor. PT. Langgeng Buana Jaya merupakan perusahaan yang bergerak pada usaha produksi barang OEM (Original Equipment Manufacturer) terkemuka dalam produk mainan konsumen untuk Pasar AS , Inggris , J. Produk PT. Langgeng Buana Jaya terdiri dari mainan part plastic, hingga produk mainan peralatan elektronik besar sepeeti alat penyedot debu Vacum Cleaner. Untuk itu perusahaan dapat memili

Style APA, Harvard, Vancouver, ISO itp.

2

Hassan Murshid, Zsa Zsa Nura’in, and Siti Zubaidah Ismail. "INVESTIGATING EFFICIENCY OF MATERIALS MANAGEMENT AT ORIGINAL EQUIPMENT MANUFACTURER (OEM)." Journal of Modern Manufacturing Systems and Technology 6, no. 2 (2022): 18–25. http://dx.doi.org/10.15282/jmmst.v6i2.8559.

Pełny tekst źródła

Streszczenie:

Original Equipment Manufacturer (OEM) businesses always facing a challenge in managing the material effectively and efficiently. The aim of this is to identify, analyse and improve the Efficiency of Materials Management at Original Equipment Manufacturer (OEM) company. There are two materials management problems: stock-out and overstock, occur frequently in the OEM company. Data collection is through the observation and interviews with the top manager and other staff involved in materials management operations. Secondary data is retrieved from the related information on materials management. T

Style APA, Harvard, Vancouver, ISO itp.

3

Wlazlak, Paraskeva, Kristina Säfsten, and Per Hilletofth. "Original equipment manufacturer (OEM)-supplier integration to prepare for production ramp-up." Journal of Manufacturing Technology Management 30, no. 2 (2019): 506–30. http://dx.doi.org/10.1108/jmtm-05-2018-0156.

Pełny tekst źródła

Streszczenie:

Purpose Although prior research provides evidence that production ramp-up is often disrupted by supplier-related problems, it fails to discuss how the original equipment manufacturer (OEM) and various types of suppliers integrate their functions and operations to secure preparations for production ramp-up. The purpose of this paper is to investigate OEM–supplier integration in a new product development (NPD) project to prepare for production ramp-up. Design/methodology/approach The results presented in this paper are based on a real-time, longitudinal study of a single collaborative NPD projec

Style APA, Harvard, Vancouver, ISO itp.

4

Mansor, Nor Hayati, and Rahinah Ibrahim. "Personal Competency and Behaviour Effect on Design Judgement Among Designers in Furniture Manufacturing." International Journal of Art and Design 6, no. 1 (2022): 67–79. http://dx.doi.org/10.24191/ijad.v6i1.1352.

Pełny tekst źródła

Streszczenie:

Malaysia furniture manufacturing is a lucrative industry with the majority are Small and Medium Enterprises (SME). Moving the SMEs from Original Equipment Manufacturer (OEM) to Original Design Manufacturer (ODM) is encouraged by the government in pursuit of global competitiveness. One aspect of transformation is hiring design personnel into the manufacturing organisation especially among the Bumiputra SMEs who are lagging behind the other manufacturers. The purpose of this study is to identify the qualities of designers who could improve design judgement for New Product Development (NPD) of fu

Style APA, Harvard, Vancouver, ISO itp.

5

Sujay, Bhalchandra, and N.D.Shinde. "Role of Retail Channel Management Strategy – In Context of Indian Automobile Dealerships Satisfaction." International Journal of Engineering and Management Research 14, no. 2 (2024): 143–49. https://doi.org/10.5281/zenodo.11118714.

Pełny tekst źródła

Streszczenie:

Maintaining high-quality standards is crucial for dealerships to ensure ongoing business success since they play a critical role in promoting manufacturers in the marketplace. The study's objective is to highlight areas where Original Equipment Manufacturer (OEM)-Dealers relationships are lacking in relation to crucial business metrics in order to provide practical recommendations for improving OEM-Dealer collaboration. The study utilizes primary data, collected from 141 automobile dealers in Pune using a random sampling technique and structured interviews. Secondary data is gathered in order

Style APA, Harvard, Vancouver, ISO itp.

6

Cao, Jun, Yu Xiong, and Yuan Yuan Chen. "Rebuild Technology Transfer in the Presence of Remanufacturing Dealer." Key Engineering Materials 572 (September 2013): 695–98. http://dx.doi.org/10.4028/www.scientific.net/kem.572.695.

Pełny tekst źródła

Streszczenie:

Product rebuilding requires OEM (Original Equipment Manufacturer) and his dealers to collaborate closely. In this paper, a model is proposed to study the rebuilding technology transfer decisions within an OEM and his authorized dealer who has to invest in technology for remanufacturing key components and rebuild used machines with the rebuilding technologies transferred from OEM. The optimal rebuilding technologies transfer and remanufacturing investment strategies are analyzed. The results highlight the significant effects of discount factor on the optimal strategies of OEM and the dealer. So

Style APA, Harvard, Vancouver, ISO itp.

7

Ren, Yuheng, Wenliang Bian, Haicheng Li, and Yingjie Ju. "A Competitive Newsvendor Problem with Product Substitution under the Carbon Cap-and-Trade System." Systems 12, no. 6 (2024): 201. http://dx.doi.org/10.3390/systems12060201.

Pełny tekst źródła

Streszczenie:

This study investigates the competitive issues of the newsvendor problem with product substitution under the carbon cap-and-trade system. Building on existing research, this paper introduces the carbon cap-and-trade system under uncertain market demand and considers that the original equipment manufacturer (OEM) can choose to procure raw materials from the contract manufacturer (CM), with both final products being substitutable. Furthermore, we explore the different substitution relationships between OEM and CM products under both pure competitive and co-opetitive modes. For this problem, deci

Style APA, Harvard, Vancouver, ISO itp.

8

Cao, Jun, Li Sha Liu, and Yu Xiong. "Research on the Influence Mechanism of After-Sales Service Model to Remanufacturing Technology Transfer in Green Supply Chain." Applied Mechanics and Materials 635-637 (September 2014): 1784–88. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.1784.

Pełny tekst źródła

Streszczenie:

The remanufacturing after-sales service of green supply chain requires OEM (original equipment manufacturer) and remanufacturer (his dealer) to collaborate closely. In this paper, two after-sales service models were proposed with an OEM and a remanufacturer. The optimal remanufacturing technology transfer and the influence mechanism were analyzed. The results suggested that: in dual channel model, the rising proportion of technology transfer promoted the development of remanufacturing market. Technology transfer ratio of single channel model rising resulted in different development tendencies

Style APA, Harvard, Vancouver, ISO itp.

9

Lv, Fei. "The Impacts of Channel Structure and Information on an OEM’s Procurement Strategy." Asia-Pacific Journal of Operational Research 37, no. 03 (2020): 2050010. http://dx.doi.org/10.1142/s0217595920500104.

Pełny tekst źródła

Streszczenie:

This paper investigates the optimal procurement strategy for an original equipment manufacturer (OEM) under different information and channel structures. We consider two possible sourcing strategies, Consignment and Turnkey, in which Consignment represents the situation when an OEM procures components itself and only assigns the production activity to a contract manufacturer (CM) and Turnkey is defined as when an OEM delegates both the procurement and production activities to the CM. We specifically consider two channel structures, a single channel with one OEM and one CM and two competing cha

Style APA, Harvard, Vancouver, ISO itp.

10

Chen, Dezhi, William Wei, Daiping Hu, and Etayankara Muralidharan. "Survival strategy of OEM companies: a case study of the Chinese toy industry." International Journal of Operations & Production Management 36, no. 9 (2016): 1065–88. http://dx.doi.org/10.1108/ijopm-04-2015-0212.

Pełny tekst źródła

Streszczenie:

Purpose Although there have been many discussions on the status and development of original equipment manufacturers (OEMs), theory on how they survive is minimal. Little is known about how OEMs survive and upgrade to other business models, such as original design manufacturers (ODMs) and original brand manufacturers (OBMs), in emerging economies. The purpose of this paper is to extend the theory on the survival path of OEMs from the perspective of emerging countries by examining how OEMs survive cost pressures and upgrade to ODMs or OBMs. Design/methodology/approach Using a multi-case study me

Style APA, Harvard, Vancouver, ISO itp.

11

Yang, Dan, Sen Liu, Zhe Zhang, Fu Huang, and Jingyang Wang. "Strategic interaction of original equipment manufacturers between outsourcing and purchasing in a quality-differentiated market." PLOS ONE 17, no. 1 (2022): e0262678. http://dx.doi.org/10.1371/journal.pone.0262678.

Pełny tekst źródła

Streszczenie:

Economic globalization has swept the whole world. To focus on their main business, enterprises that are referred to as original equipment manufacturers (OEMs) outsource non-core production activities to contract manufacturers (CMs). By constructing a two-level supply chain consisting of two competing OEMs and one upstream CM, the strategic interaction of the OEMs between outsourcing and purchasing is studied. Specifically, the CM can offer custom- and predefined modes of original equipment manufacturing (namely, CO mode and PO mode, respectively). The former mode enables OEMs to determine prod

Style APA, Harvard, Vancouver, ISO itp.

12

Guhathakurta, Rahul. "Blockchain-based Automotive EDI system, The Concept." IndraStra Global 05, no. 02 (2019): 0010. https://doi.org/10.5281/zenodo.2557549.

Pełny tekst źródła

Streszczenie:

The rise of the <em>"Blockchain Technology"</em> is opening new frontiers for existing automotive <em>Electronic Data Interchanges (EDI)</em> data pipeline. It is destined to bring in the enhanced system stability by establishing a seamless <em>(authenticated) </em>relationship between an auto manufacturer, an <em>original equipment manufacturer (OEM)</em>, and an auto dealership, and data needs to flow in both upstream and downstream.

Style APA, Harvard, Vancouver, ISO itp.

13

Zheng, Yunyi, and Jiameng Ma. "Domestic sourcing vs. Global sourcing: Impact of the exchange rate fluctuation and unreliable domestic supply chain." Advances in Economics and Management Research 1, no. 3 (2023): 202. http://dx.doi.org/10.56028/aemr.3.1.202.

Pełny tekst źródła

Streszczenie:

In high technology industry, it is optional for an original equipment manufacturer (OEM) to purchase semi-finished products directly from contract manufacturer (CM) or import raw materials abroad and entrust CM with processing. Due to various factors such as natural disasters, government’s sanctions and backwardness of domestic technology, the domestic supply chain is more fragile than global, while purchasing abroad faces the risk of exchange rate fluctuation. In this paper, we establish a duopoly game model to discuss the trade-offs between the disruption risk of domestic supply chain (ϕ) an

Style APA, Harvard, Vancouver, ISO itp.

14

Ismail, Rifky. "PERBANDINGAN PRODUK RODA GIGI UKM DAN RODA GIGI ORIGINAL EQUIPMENT MANUFACTURER (OEM) UNTUK PRODUK RODA GIGI TRANSMISI SEPEDA MOTOR." ROTASI 16, no. 2 (2014): 32. http://dx.doi.org/10.14710/rotasi.16.2.32-37.

Pełny tekst źródła

Streszczenie:

Roda gigi merupakan salah satu komponen mesin yang kompleks dalam proses perancangan dan pembuatannya. Hingga saat ini, Usaha Kecil dan Menengah (UKM) produsen komponen otomotif di Jawa Tengah belum mempu memproduksi roda gigi untuk sistem transmisi sepeda motor yang mampu memenuh standar perusahaan otomotif nasional atau mampu menjadi komponen after sales di pasar komponen purna jual. Berdasarkan survey yang dilakukan di pasar purna jual di Semarang terhadap produk roda gigi transmisi sepeda motor, roda gigi transmisi yang dijual merupakan produk Original Equipment Manufacturer (OEM) atau pro

Style APA, Harvard, Vancouver, ISO itp.

15

Wang, Xiangsheng, Temuer Chaolu, Yuchao Gao, Ying Wen, and Peng Liu. "Marketplace channel encroachment under private brand introduction of online platform." International Journal of Industrial Engineering Computations 14, no. 2 (2023): 403–14. http://dx.doi.org/10.5267/j.ijiec.2022.12.002.

Pełny tekst źródła

Streszczenie:

This paper studies the marketplace channel introduction of contract manufacturers and the response of the platform with an option to introduce a private brand. We develop a game-theoretical model to examine a three-tier e-commerce supply chain including a contract manufacturer (CM), an original equipment manufacturer (OEM) and a platform and derive the equilibrium results. We find that the marketplace channel introduction of the CM and the platform's private brand introduction influence each other. More specifically, marketplace channel encroachment may discourage the platform from introducing

Style APA, Harvard, Vancouver, ISO itp.

16

Wen, Xiaoqin, and Chenhanzhi Wang. "Optimal-Quality Choice and Committed Delivery Time in Build-To-Order Supply Chain." Sustainability 14, no. 18 (2022): 11746. http://dx.doi.org/10.3390/su141811746.

Pełny tekst źródła

Streszczenie:

This paper studies a build-to-order supply chain (BTO-SC), which consists of one contract manufacturer (CM) and one original equipment manufacturer (OEM). The CM commits to the delivery time and the OEM determines the quality level and the selling price of the supply chain product. We present a three-stage Stackelberg game model and identify a Nash equilibrium solution for the decisions of the CM and the OEM. We conduct a sensitivity analysis to provide insights into the roles of the CM and the OEM. Our main research findings are as follows: The CM’s profit increases while the OEM’s profit fir

Style APA, Harvard, Vancouver, ISO itp.

17

Xia, Xiqiang, and Cuixia Zhang. "The Impact of Authorized Remanufacturing on Sustainable Remanufacturing." Processes 7, no. 10 (2019): 663. http://dx.doi.org/10.3390/pr7100663.

Pełny tekst źródła

Streszczenie:

Remanufacturing could effectively solve resource shortage and environment crisis and achieve sustainable development of the economy. The original equipment manufacturer (OEM) could not only focus on its core business (i.e., producing new products), but also get profit from remanufacturing through the intellectual property rights. Based on the authorized remanufacturing, the game model between a manufacturer and a remanufacturer was constructed. Based on the game model, the impact of authorized remanufacturing on sustainable remanufacturing is analysed, and the coordination mechanism between ma

Style APA, Harvard, Vancouver, ISO itp.

18

Dong, Binwei, Wansheng Tang, and Chi Zhou. "Strategic sourcing under recall loss sharing and product quality investment." RAIRO - Operations Research 54, no. 4 (2020): 1133–60. http://dx.doi.org/10.1051/ro/2019053.

Pełny tekst źródła

Streszczenie:

Product recall has been a widespread practical operation risk in the production outsourcing. To remit even avoid product recall risk, this paper considers a two-echelon supply chain where the original equipment manufacturer (OEM) orders a critical component from one or two contract manufacturers (CMs) and uses it to produce finished product with potential quality defect. The CMs can decide investment level to reduce defect possibility and share recall loss with the OEM once product recall is implemented. When the recall loss sharing rate is fixed, the OEM may adopt the single sourcing strategy

Style APA, Harvard, Vancouver, ISO itp.

19

Husna Bt Mazril Suzaimi, Nursyifa, Noorul Huda Sahari, and Nadiah Ramlan. "CHALLENGESOF OEM MANUFACTURER IN HALAL COSMETIC PRODUCTS CERTIFICATION APPLICATIONS." International Journal of Advanced Research 11, no. 09 (2023): 703–10. http://dx.doi.org/10.21474/ijar01/17578.

Pełny tekst źródła

Streszczenie:

As the 2.4 billion Muslim consumers around the world want more halal cosmetics, Malaysia is creating many cosmetics founders, both Muslim and non-Muslim, who push cosmetics with halal certification to help educate consumers about halal cosmetics. With an Original Equipment Manufacturer(OEM)manufacturing business, the business founder can have their own brand of cosmetics even they do not have a factory. OEM is a business that makes products based on what the founders desired. The OEM manufacturer will manage every procedure involved in producing a cosmetic product, including for getting halal

Style APA, Harvard, Vancouver, ISO itp.

20

Li, Wei, Hang Wu, and Liurui Deng. "Decision-Making Based on Consumers’ Perceived Value in Different Remanufacturing Modes." Discrete Dynamics in Nature and Society 2015 (2015): 1–8. http://dx.doi.org/10.1155/2015/278210.

Pełny tekst źródła

Streszczenie:

We investigate how the diversity of consumers’ perceived value in different remanufacturing modes affects remanufacturing decision-making. We establish a two-stage optimal decision-making model of original equipment manufacturer (OEM) remanufacturing and a noncooperative game model of third party remanufacturer (TPR) remanufacturing and then analyze the optimal decisions of OEM and TPR. Comparing the effects of consumers’ perceived value on remanufacturing decision-making in different modes, we find that when OEM remanufactures products, consumers’ perceived value has a negative effect on new

Style APA, Harvard, Vancouver, ISO itp.

21

Jeong, EuiBeom, GeunWan Park, and Seung Ho Yoo. "Incentive Mechanism for Sustainable Improvement in a Supply Chain." Sustainability 11, no. 13 (2019): 3508. http://dx.doi.org/10.3390/su11133508.

Pełny tekst źródła

Streszczenie:

In this study, we consider the issue of sustainable development in the supply chain consisting of an original equipment manufacturer (OEM) and a contract manufacturer (CM). We investigate how to facilitate the CM’s investment in the environmental quality of a product so as to properly respond to climate change. We introduce a quantity incentive contract, and obtain the optimal solution based on a Stackelberg game. The OEM, as the focal company, determines the level of the incentive, and the CM, responsible for product design and production, determines its level of environmental quality given t

Style APA, Harvard, Vancouver, ISO itp.

22

Mai, Fengxia, Jianxiong Zhang, and Xiaojie Sun. "Analysis of Dynamic Cournot Game in a Coopetition Supply Chain." Discrete Dynamics in Nature and Society 2020 (July 18, 2020): 1–12. http://dx.doi.org/10.1155/2020/4168395.

Pełny tekst źródła

Streszczenie:

In the original manufacturing industry, upstream encroachment has become a universal commercial phenomenon. This paper considers a coopetition supply chain consisting of an upstream original design manufacturer (ODM) and a downstream original equipment manufacturer (OEM) and proposes a dynamic Cournot game under bounded rationality. To cope with a dynamic repeated game in discrete time, a gradient adjustment mechanism is adopted. Furthermore, bifurcation diagram, largest Lyapunov exponent, basin of attraction, and critical curve are introduced to investigate the dynamic behavior of this game.

Style APA, Harvard, Vancouver, ISO itp.

23

Sujay Bhalchandra and Nilesh D. Shinde. "An exploratory study of factors influencing manufacturer-dealer relationship in Indian automobile industry." Scientific Temper 15, no. 02 (2024): 2299–303. http://dx.doi.org/10.58414/scientifictemper.2024.15.2.44.

Pełny tekst źródła

Streszczenie:

The purpose of this study is to explore critical factors that define the level of satisfaction and bond of relationship between automobiles companies and their dealerships. Indian automobile industry is one of the world’s fastest growing industries and the success of auto companies is largely depends on their robust and healthy dealer network. In this paper, we attempt to identify critical factors which can influence the relationship of manufacturers and dealers. The research is based on a survey carried out in the Pune region of Maharashtra, where we focused on identified critical factors of

Style APA, Harvard, Vancouver, ISO itp.

24

Winward, Kyle D. "ChiltonLibrary." Charleston Advisor 25, no. 3 (2024): 15–19. http://dx.doi.org/10.5260/chara.25.3.06.

Pełny tekst źródła

Streszczenie:

ChiltonLibrary is a collection of automotive original equipment manufacturer (OEM) repair and maintenance articles and diagrams. ChiltonLibrary includes makes and models from the 1940s to current model years. The current version has added accessibility features, including ReadSpeaker text-to-speech versions of articles. ChiltonLibrary also includes technical service bulletins/recall information, automotive repair videos, and ASE test prep quizzes. ChiltonLibrary is an authoritative resource that benefits from an intuitive interface and a mobile-responsive design.

Style APA, Harvard, Vancouver, ISO itp.

25

Surojo, Eko, Wijang Wisnu Raharjo, Jamasri, and Aditya Utama. "Characterization of Commercial Automotive Brake Pad Materials." Applied Mechanics and Materials 842 (June 2016): 36–42. http://dx.doi.org/10.4028/www.scientific.net/amm.842.36.

Pełny tekst źródła

Streszczenie:

In automotive parts market, there are two classes of commercial brake pad that are original equipment manufacturer (OEM) and aftermarket (Non-OEM spare part). In manufacturing of commercial brake pad materials, the difference of ingredient or concentration used is important because of differences in characteristics and cost. It is well known that the OEM brake pads are more expensive than the Non-OEM brake pads. In this study, the OEM and the Non-OEM of passenger car brake pad were evaluated in order to obtain a comparison of friction characteristics, composition, and microstructure between th

Style APA, Harvard, Vancouver, ISO itp.

26

Yu, Haiyun, and Shuo Wang. "Blockchain-Enabled Closed-Loop Supply Chain Optimization for Power Battery Recycling and Cascading Utilization." Sustainability 17, no. 9 (2025): 4192. https://doi.org/10.3390/su17094192.

Pełny tekst źródła

Streszczenie:

This article investigates decision-making strategies for power battery recycling and cascading utilization within the context of rapidly advancing blockchain technology, aiming to enhance the sustainability and efficiency of energy storage systems. A closed-loop recycling supply chain model is proposed, integrating key stakeholders such as power battery manufacturers, OEM (original equipment manufacturer) vehicle manufacturers, third-party recyclers, tiered users, and consumers. The study focuses on critical factors including competition among recycling channels, the level of blockchain-enable

Style APA, Harvard, Vancouver, ISO itp.

27

Ahmad, Md Tanweer, and Sandeep Mondal. "Dynamic supplier selection through optimal ranking under two-echelon system." Benchmarking: An International Journal 26, no. 8 (2019): 2574–607. http://dx.doi.org/10.1108/bij-10-2018-0338.

Pełny tekst źródła

Streszczenie:

Purpose With the increasing competition among the industries, they remain under pressure as how to select the best set of suppliers for the competitive edge. Often, it has been challenging to develop an effective set of suppliers due to varied and asymmetric mode of criteria. The purpose of this paper is to develop a responsive chain under original equipment manufacturer (OEM). Design/methodology/approach This study proposes a responsive chain under a two-echelon system (TES) of OEM, which needs to collaborate with a set of suppliers at each echelon through an integrated methodology of AHP and

Style APA, Harvard, Vancouver, ISO itp.

28

Li, Yaping, Zongxian Wang, and Junhai Ma. "Remanufacturing Mode Selection regarding Technology Development." Discrete Dynamics in Nature and Society 2021 (March 12, 2021): 1–12. http://dx.doi.org/10.1155/2021/8835868.

Pełny tekst źródła

Streszczenie:

We consider a Cournot game model between an OEM (original equipment manufacturer) and an IR (independent remanufacturer). The OEM manufactures new products and decides the quality level. IR remanufactures and obtains OEM’s technology through technology licensing or joint R&D. To prevent the cannibalization of new products by remanufactured products, the OEM may be reluctant to disclose latest technology to the IR. When the IR chooses the technology licensing mechanism, it will be in a rather disadvantaged position in the competition. In contrast, joint R&D can avoid this dilemma. The t

Style APA, Harvard, Vancouver, ISO itp.

29

Richards, Brandon D. "Error Probabilities and Relationships in Assembly and Maintenance of Aircraft Engines." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 62, no. 1 (2018): 1599–603. http://dx.doi.org/10.1177/1541931218621361.

Pełny tekst źródła

Streszczenie:

Aircraft engine maintenance errors recorded during commercial revenue operation (field operation) share common causes and outcomes as those documented in original equipment manufacturer (OEM) and maintenance repair and overhaul (MRO) facilities. Utilizing data from one or more one of these sources can increase the understanding of skill-based, decision and perceptual errors occurring during assembly, operation and maintenance. The null hypothesis in this descriptive, explanatory research is: the nominal human error probability of removing and replacing a specified line replaceable unit (LRU)/c

Style APA, Harvard, Vancouver, ISO itp.

30

Dai, Daoming, Xuanyu Wu, and Fengshan Si. "The Complexity Analysis and Control of Time-Delay OEM Supply Chain considering R&D Efforts and Marketing Level." Mathematical Problems in Engineering 2020 (October 8, 2020): 1–12. http://dx.doi.org/10.1155/2020/4746925.

Pełny tekst źródła

Streszczenie:

In this paper, we investigate a supply chain consisting of an OEM (i.e., original equipment manufacturer) and a CM (contract manufacturer), in which the OEM decides design effort level and marketing level, and the CM makes decision on product manufacturing effort level. We establish a three-dimensional discrete dynamic model with time delay. Firstly, the sufficient conditions for Neimark–Sacker bifurcation are obtained by using different combinations of decision delay periods as bifurcation parameters, and the effect of the adjustment speeds of decision variables on the system stability and im

Style APA, Harvard, Vancouver, ISO itp.

31

Cao, Jun, and Li Sha Liu. "Research on the Influence Mechanism of Remanufacturing Models on Technology Transfer in Circular Economy." Applied Mechanics and Materials 675-677 (October 2014): 1842–45. http://dx.doi.org/10.4028/www.scientific.net/amm.675-677.1842.

Pełny tekst źródła

Streszczenie:

Previous researches on remanufacturer behavior in the supply chain only considered that the products were transferred between the OEM(Original Equipment Manufacturer) and remanufacturer. This paper is a comparative study of the impact of different remanufacturing models on technology transfer in remanufacturing market. Our results showed that when the waiting time of consumers was zero, the proportion of technology transfer under BR model (buyback and remanufacturing model) is higher than that under ER model (Entrusting and remanufacturing model). When the waiting time of consumer was not zero

Style APA, Harvard, Vancouver, ISO itp.

32

Feng, Miao, Haoran Si, Yang Li, and Junrui Zhang. "Evaluating the drivers of B2B performance: An empirical analysis based on Alibaba." PLOS ONE 19, no. 7 (2024): e0306919. http://dx.doi.org/10.1371/journal.pone.0306919.

Pełny tekst źródła

Streszczenie:

The rapid development of B2B has brought about fierce competition among suppliers, and how to gain customer attention and improve performance has become a common concern in academia and industry. This study examined the drivers and mechanisms of B2B performance from an enterprise capability perspective. We collected transaction and enterprise data from 325 suppliers on Alibaba 1688 platform and constructed a structural equation model (SEM). Results showed that supplier service capability, logistics capability, and production capacity all positively impacted B2B performance through the mediatin

Style APA, Harvard, Vancouver, ISO itp.

33

Yang, Jian Zhong, Tao Li, Qing Song, Dong Chen, and Ji Hong Chen. "Research and Implementation of OEM-Software for Pilger-Roller Processing." Applied Mechanics and Materials 437 (October 2013): 752–60. http://dx.doi.org/10.4028/www.scientific.net/amm.437.752.

Pełny tekst źródła

Streszczenie:

The processing of complicated surface is always a tough job in multi-axis machining. Pilger-roller is a kind of tool molds with complicated surface. To process the complicated grooved-surface of Pilger-roller, an algorithm, which included grooved-surface modeling, tool-path planning and cutter location (CL) computation, is proposed and implemented. The tool-path generated by this algorithm is smooth and has no interference. In order to meet the demand of Pilger-roller processing in efficiency and automation, automatically-processing software is developed based on Original Equipment Manufacture

Style APA, Harvard, Vancouver, ISO itp.

34

Osman, Nur Syazana. "The Effect of Design Capability Characteristic on Design Performance for Bumiputera Furniture Companies." International Journal of Business and Management 2, no. 3 (2018): 30–35. http://dx.doi.org/10.26666/rmp.ijbm.2018.3.5.

Pełny tekst źródła

Streszczenie:

Malaysia furniture industry has seen exchange from the Original Equipment Manufacturer (OEM) to Original Design Manufacturer (ODM). These changes occur due to the local furniture manufacturers to add design value into their products. One of the ways out of this creativity rut was to revamp the model form producing or manufacturing product for international buyers in creating, designing and marketing our own product internationally. This study attempts to investigate the design capability of Bumiputera furniture manufacturing companies, that effects on the decline on design performance. Besides

Style APA, Harvard, Vancouver, ISO itp.

35

Hu, Yuqing, Lijun Meng, and Zuqing Huang. "Pricing and Sales Effort Decisions in a Closed-Loop Supply Chain Considering the Network Externality of Remanufactured Product." Sustainability 15, no. 7 (2023): 5771. http://dx.doi.org/10.3390/su15075771.

Pełny tekst źródła

Streszczenie:

Considering the network externality of remanufactured product, this paper develops the Stackelberg game models in a closed-loop supply chain (CLSC) consisting of an original equipment manufacturer (OEM) and a retailer with dual sales channel under three scenarios, i.e., no sales effort (Model N), the retailer exerting sales effort (Model R) and the OEM exerting sales effort (Model M). The study investigates the pricing and sales effort decisions for CLSC members. The results show that: (1) Compared with no sales effort, the sales effort behavior can always improve the profits of the OEM and en

Style APA, Harvard, Vancouver, ISO itp.

36

Graessler, Iris, Jan Pfeifer, Florian Hintz, and Nicolas Meyrl. "Systems Engineering roles to handle emergent properties and behaviors in complex technical systems." INCOSE International Symposium 34, no. 1 (2024): 584–98. http://dx.doi.org/10.1002/iis2.13164.

Pełny tekst źródła

Streszczenie:

AbstractEngineering projects for complex technical systems such as automobiles demand extensive requirement specifications and corresponding hierarchy levels in system architectures. Especially when considering emergent phenomena, such as total weight or aerodynamics, a closely networked collaboration of discipline‐specific and cross‐disciplinary roles is required. Further, in large organizations with a group structure, resulting functional and non‐functional contents need to be managed by distinct Systems Engineering roles. For example, the role “property manager” takes care of achieving over

Style APA, Harvard, Vancouver, ISO itp.

37

Chang, Yutsen, Yuling Wu, Hungshyong Chen, Minghsu Tsai, Chiachen Chang, and Aaron Yujen Wu. "Comparing the Maximum Load Capacity and Modes of Failure of Original Equipment Manufactured and Aftermarket Titanium Abutments in Internal Hexagonal Implants." Metals 10, no. 5 (2020): 556. http://dx.doi.org/10.3390/met10050556.

Pełny tekst źródła

Streszczenie:

The purpose of this in vitro study is to compare the maximum load capacity and modes of failure under static loading in three types of titanium abutments (n = 3) with different processes or manufacturers. The Pre-Ti group consists of prefabricated titanium abutments from original equipment manufacturers (OEM), the CAD-Ti group consists of OEM titanium abutments fabricated with computer-assisted design/manufacturing (CAD/CAM) technique, and the AM-Ti group is CAD/CAM titanium abutment made by aftermarket manufacturers. A full zirconia crown was fabricated and cemented to each abutment. An all-e

Style APA, Harvard, Vancouver, ISO itp.

38

Koojaroenpaisan, Rawiporn, and Paul Patterson. "GAZI and the Shock Absorber Market in Thailand." Asian Case Research Journal 17, no. 02 (2013): 243–66. http://dx.doi.org/10.1142/s0218927513500119.

Pełny tekst źródła

Streszczenie:

Siam Suspension Innovation Co. Ltd. (SSI) in 2004 manufactured the first local brand of shock absorber for motor cycles (GAZI brand) in Thailand. This case documents how several entrepreneurs with a passion for motorcycles grasped an opportunity to invent, manufacture and successfully brand a decorative shock absorber for the ubiquitous motorcycle riders of Thailand. Prior to the development of the GAZI brand, shock absorbers were simply just another OEM (original equipment manufacturer) component on a motor bike that was typically only replaced when it was worn out. Shock absorbers were diffe

Style APA, Harvard, Vancouver, ISO itp.

39

Ariyanto, Sudirman Rizki, Ata Syifa' Nugraha, Wahyu Robby Cahyadi, Yelma Dianastiti, and Muhammad Yandi Pratama. "Analyzing Transition Metal Catalytic Converter Impact on Four-Stroke Motorcycle Fuel Consumption." Journal of Mechanical Engineering Science and Technology (JMEST) 7, no. 2 (2023): 119. http://dx.doi.org/10.17977/um016v7i22023p119.

Pełny tekst źródła

Streszczenie:

Increased exhaust emissions from motor vehicles have become a major concern in efforts to reduce air pollution. One developed solution is the use of transition metallic catalytic converter (TMCC) technology in vehicle exhaust systems. This study aims to compare the fuel consumption efficiency of three types of exhaust systems, namely standard exhaust without a catalyst (STD WC), the standard exhaust with Original Equipment Manufacturer catalyst (STD OEM), and an exhaust system equipped with a Copper-Coated Chrome Metallic Catalytic Converter (TMCC CuCr). The data analysis method employed a qua

Style APA, Harvard, Vancouver, ISO itp.

40

Kwofie, Francis, Nuwan Undugodage D. Perera, Kaushalya S. Dahal, George P. Affadu-Danful, Koichi Nishikida, and Barry K. Lavine. "Transmission Infrared Microscopy and Machine Learning Applied to the Forensic Examination of Original Automotive Paint." Applied Spectroscopy 76, no. 1 (2021): 118–31. http://dx.doi.org/10.1177/00037028211057574.

Pełny tekst źródła

Streszczenie:

Alternate least squares (ALS) reconstructions of the infrared (IR) spectra of the individual layers from original automotive paint were analyzed using machine learning methods to improve both the accuracy and speed of a forensic automotive paint examination. Twenty-six original equipment manufacturer (OEM) paints from vehicles sold in North America between 2000 and 2006 served as a test bed to validate the ALS procedure developed in a previous study for the spectral reconstruction of each layer from IR line maps of cross-sectioned OEM paint samples. An examination of the IR spectra from an in-

Style APA, Harvard, Vancouver, ISO itp.

41

Aboutorabi, H. M. R., and L. Kung. "Application of Coupled Structural Acoustic Analysis and Sensitivity Calculations to a Tire Noise Problem." Tire Science and Technology 40, no. 1 (2012): 25–41. http://dx.doi.org/10.2346/1.3684489.

Pełny tekst źródła

Streszczenie:

Abstract REFERENCE: H. M. R. Aboutorabi and L. Kung, “Application of Coupled Structural Acoustic Analysis and Sensitivity Calculations to a Tire Noise Problem,” Tire Science and Technology, TSTCA, Vol. 40, No. 1, January – March 2012, pp. 25–41. ABSTRACT: Tire qualification for an original equipment (OE) program consists of several rounds of submissions by the tire manufacturer for evaluation by the vehicle manufacturer. Tires are evaluated both subjectively, where the tire performance is rated by an expert driver, and objectively, where sensors and testing instruments are used to measure the

Style APA, Harvard, Vancouver, ISO itp.

42

Sai Sree Ram, Muthyala, and Rishi Manoj. "Breaking the Cross Compatibility Barriers of Extracorporeal Membrane Oxygenation by Streamlining the Design." International Journal of Health Technology and Innovation 3, no. 03 (2024): 54–60. https://doi.org/10.60142/ijhti.v3i03.09.

Pełny tekst źródła

Streszczenie:

Extracorporeal Membrane Oxygenation (ECMO) is a Class C medical device under CDSCO, which suggests that the medical device is classified as moderate to high risk. It acts as an extended life support device for patients with severe heart and lung issues for a prolonged period of time, compared to heart-lung machines. There is a cross-compatibility barrier in the medical device market, wherein each manufacturer will make modifications to the design in order to make them exclusively compatible with the solutions and repair kits provided by the Original Equipment Manufacturer (OEM). The proposed s

Style APA, Harvard, Vancouver, ISO itp.

43

Ghimire, Sulav, Gabriel Miguel Gomes Guerreiro, Kanakesh Vatta Kkuni, et al. "Functional specifications and testing requirements for grid-forming offshore wind power plants." Wind Energy Science 10, no. 1 (2025): 1–15. https://doi.org/10.5194/wes-10-1-2025.

Pełny tekst źródła

Streszczenie:

Abstract. Throughout the past few years, various transmission system operators (TSOs) and research institutes have defined several functional specifications for grid-forming (GFM) converters via grid codes, white papers, and technical documents. These institutes and organisations also proposed testing requirements for general inverter-based resources (IBRs) and specific GFM converters. This paper initially reviews functional specifications and testing requirements from several sources to create an understanding of GFM capabilities in general. Furthermore, it proposes an outlook on the defined

Style APA, Harvard, Vancouver, ISO itp.

44

Yuliawati, Evi, Pratikto Pratikto, Sugiono Sugiono, and Oyong Novareza. "Development of cores acquisition model with two switching mechanisms in a retailer-oriented closed-loop supply chain system." Eastern-European Journal of Enterprise Technologies 2, no. 3 (110) (2021): 6–15. http://dx.doi.org/10.15587/1729-4061.2021.225147.

Pełny tekst źródła

Streszczenie:

Retailer-Oriented Closed-Loop Supply Chain (ROCLSC) is an integration of forward and reverse supply chains with retailer taking charge of the remanufacturing, distribution, and collecting activities. This type of mechanism is quite effective, since the majority of product returns management is performed by the retailer. However, in practical industries, the implementation of ROCLSC is still limited. In this study, we investigate a ROCLSC system that involves an Original Equipment Manufacturer (OEM) and a retailer. OEM plays a role as a producer of new products, while the retailer is in charge

Style APA, Harvard, Vancouver, ISO itp.

45

Evi, Yuliawati, Pratikto Pratikto, Sugiono Sugiono, and Novareza Oyong. "Development of cores acquisition model with two switching mechanisms in a retailer-oriented closed-loop supply chain system." Eastern-European Journal of Enterprise Technologies 2, no. 3(110) (2021): 6–15. https://doi.org/10.15587/1729-4061.2021.225147.

Pełny tekst źródła

Streszczenie:

Retailer-Oriented Closed-Loop Supply Chain (ROCLSC) is an integration of forward and reverse supply chains with retailer taking charge of the remanufacturing, distribution, and collecting activities. This type of mechanism is quite effective, since the majority of product returns management is performed by the retailer. However, in practical industries, the implementation of ROCLSC is still limited. In this study, we investigate a ROCLSC system that involves an Original Equipment Manufacturer (OEM) and a retailer. OEM plays a role as a producer of new products, while the retailer is in charge

Style APA, Harvard, Vancouver, ISO itp.

46

Dwi Saputro, Rifki Ridho, and Muhammad Ridwan Arif Cahyono. "Sistem Pemantauan Ban Hasil Inspeksi di Area Karantina OEM Berbasis VB.Net 2013." ICIT Journal 7, no. 2 (2021): 177–89. http://dx.doi.org/10.33050/icit.v7i2.1646.

Pełny tekst źródła

Streszczenie:

Karantina Original Equipment Manufacture (OEM) merupakan sebuah bagian yang masih dalam satu lingkup dengan departemen Final Inspection, dimana bagian tersebut bertugas melakukan second inspection terhadap ban yang dikategorikan sebagai ban OE hasil dari pengecekan Dynamic Balance (DB) dan Uniformity (UF). Kesulitan yang dihadapi oleh inspektor di area karantina OEM yakni sulitnya melakukan monitoring tyre secara realtime. Kemudian kesulitan yang juga dihadapi oleh admin di departemen Final Inspection yakni sulitnya memproses data hasil check yang akan di proses menjadi report. Maka pada penel

Style APA, Harvard, Vancouver, ISO itp.

47

Rožanec, Jože M., Blaž Kažič, Maja Škrjanc, Blaž Fortuna, and Dunja Mladenić. "Automotive OEM Demand Forecasting: A Comparative Study of Forecasting Algorithms and Strategies." Applied Sciences 11, no. 15 (2021): 6787. http://dx.doi.org/10.3390/app11156787.

Pełny tekst źródła

Streszczenie:

Demand forecasting is a crucial component of demand management, directly impacting manufacturing companies’ planning, revenues, and actors through the supply chain. We evaluate 21 baseline, statistical, and machine learning algorithms to forecast smooth and erratic demand on a real-world use case scenario. The products’ data were obtained from a European original equipment manufacturer targeting the global automotive industry market. Our research shows that global machine learning models achieve superior performance than local models. We show that forecast errors from global models can be cons

Style APA, Harvard, Vancouver, ISO itp.

48

Phimpisan, Phaireepinas, and Chatchapol Chungchoo. "A Best Practice Guideline for Inspecting Precision Machined Parts by Using Several Coordinate Measuring Machines (CMMs)." Applied Mechanics and Materials 894 (September 2019): 90–95. http://dx.doi.org/10.4028/www.scientific.net/amm.894.90.

Pełny tekst źródła

Streszczenie:

Currently in Thailand, original equipment manufacturers (OEM) who produce precision-machined parts face a serious problem about product rejection from customers. This is because measuring results from the OEM supplier differ from the measuring results from the OEM buyer. Normally, for precision-machined parts, OEM suppliers and OEM buyers use CMM machines as an inspection tool. One major cause of the difference in measurements is that suppliers and buyers use different CMM machine, operators and measuring methods. In order to mitigate the difference in measurements, the standard guideline for

Style APA, Harvard, Vancouver, ISO itp.

49

Dachyar, M., A. T. Tjiptadi, and Farizal. "Original Equipment Manufacturer (OEM) Site Selection of Traditional Medicine Companies in Indonesia using Analytic Hierarchy Process (AHP) Method." IOP Conference Series: Materials Science and Engineering 598 (September 6, 2019): 012090. http://dx.doi.org/10.1088/1757-899x/598/1/012090.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Saputra, Johan. "Analisa kepuasan pelanggan Original Equipment Manufacturing ban motor dengan metode IPA-QFD: Studi kasus di PT. GTB." Operations Excellence: Journal of Applied Industrial Engineering 12, no. 1 (2020): 40. http://dx.doi.org/10.22441/oe.2020.v12.i1.004.

Pełny tekst źródła

Streszczenie:

PT. GTB is a manufacturing company that manufactures tyres for motor vehicles, one of them motorcycle tires. The market segmentation of PT. GTB is an Original Equipment Manufacturing (OEM) market. Based on OEM market segmentation, PT. GTB has two large customer groups that include OEM customers. The complaint level of the customer for the use of motor tires in 2017 as much as 622 times and year 2018 as much as 352 times. In an effort to maintain the sustainability of product sales, customer complaints are critical to the company's improvement focus. The purpose of this research is analyzing th

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!