Zaloguj się

Gotowe bibliografie tematyczne / Paper-based diagnostics

Spis treści

Rozprawy doktorskie

Gotowa bibliografia na temat „Paper-based diagnostics”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Paper-based diagnostics”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Rozprawy doktorskie na temat "Paper-based diagnostics"

1

Miller, Eric Alexander. "Development of thermostable affinity reagents for low-cost, paper-based medical diagnostics." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122849.

Pełny tekst źródła

Streszczenie:

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Chemical Engineering, 2019<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references.<br>The timely diagnosis and treatment of disease in resource-constrained settings requires the development of robust point-of-care (POC) diagnostics, which provide accurate results and can be employed by users with minimal medical training and limited access to basic infrastructure. One of the most common POC diagnostic formats is the immunochromatographic rapid diagnostic test, which traditionally uses nitrocellulose-i

Style APA, Harvard, Vancouver, ISO itp.

2

Ward, Jennifer Guerin. "Nitrocellulose Paper Based Microfluidic Platform Development and Surface Functionalization with Anti-IgE Aptamers." DigitalCommons@CalPoly, 2012. https://digitalcommons.calpoly.edu/theses/746.

Pełny tekst źródła

Streszczenie:

The purpose of this thesis project was to demonstrate the ability to utilize the capabilities of aptamers so that they may act as capture reagents for paper microfluidic devices. Several characterization experiments were conducted as a precursor before the final experimentation was performed. Paper characterization, manufacturing protocols for printing and heating, as well as 3D chip fabrication were all performed and analyzed. The results confirmed that the control of fluid through a 3D microfluidic device based in nitrocellulose is possible. For the biochemistry portion of this thesis rep

Style APA, Harvard, Vancouver, ISO itp.

3

Lama, Lara. "Novel methods for improving rapid paper-based protein assays with gold nanoparticle detection." Licentiate thesis, KTH, Proteomik och nanobioteknologi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-214065.

Pełny tekst źródła

Streszczenie:

This thesis describes methods for improving sensitivity in rapid singleplex and multiplex microarray assays. The assays utilize the optical characteristics of colloidal gold nanoparticles for the colorimetric detection of proteins. Multiplexed detection in sandwich immunoassays is limited by cross-reactivity between different detection antibodies. The cross-reactivity between antibodies can contribute to increased background noise - decreasing the Limit-of-Detection of the assay - or generate false positive signals. Paper I shows improved assay sensitivity in a multiplexed vertical flow assay

Style APA, Harvard, Vancouver, ISO itp.

4

Glavan, Ana. "Chemical Approaches to the Surface Engineering of Paper and Cellulose-Based Materials for Microfluidics, Electronics and Low-Cost Diagnostics." Thesis, Harvard University, 2016. http://nrs.harvard.edu/urn-3:HUL.InstRepos:26718749.

Pełny tekst źródła

Streszczenie:

Paper (and other cellulose-based materials such as cotton thread and fabrics) are underexploited as materials for the construction of “high-tech” and “lab-on-a-chip” devices. One major drawback of paper is its tendency to absorb water from the environment and, with wetting, to change its mechanical properties; other challenges relate to control over the attachment of molecules (e.g. antibodies, DNA) and cells on its surface, and to the addition of electronic function. The goal of this thesis is to develop paper as a substrate for a range of applications— microfluidics, substrates for electroni

Style APA, Harvard, Vancouver, ISO itp.

5

Katis, Ioannis. "Laser direct write techniques for the fabrication of paper-based diagnostic devices." Thesis, University of Southampton, 2015. https://eprints.soton.ac.uk/388397/.

Pełny tekst źródła

Streszczenie:

We report on the use of laser direct-write techniques for the fabrication of point-of-care paper-based diagnostic sensors. These include laser-based deposition, laser ablation and laser-induced photo-polymerisation. Firstly, Laser Induced Forward Transfer (LIFT) was employed to deposit biomolecules from a donor film onto paper receivers. Paper was chosen as the ideal receiver because of its inherent properties which make it an efficient and suitable platform for point-of-care diagnostic sensors. Both enzyme-tagged and untagged antibodies were LIFT-printed and their viability was confirmed via

Style APA, Harvard, Vancouver, ISO itp.

6

Tageson, Mackenzie Elizabeth. "FUNCTIONAL 3-D CELLULOSE & NITROCELLULOSE PAPER-BASED, MULITPLEX DIAGNOSTIC PLATFORMS WITHOUT COUPLING AGENTS." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/1128.

Pełny tekst źródła

Streszczenie:

The purpose of this thesis was to demonstrate device functionality of 3-D paper-based, multiplex platforms, µPADs, without the use of coupling agents between layers. Previously, these platforms were fabricated with double-sided tape and cellulose powder to try to augment proper fluid routing, but difficulties with this method occurred. An acrylic housing unit with strategically placed pressure tabs was designed to aid horizontal and vertical fluid routing through the platform, thus eliminating the inconsistencies associated with coupling agents. Channel characterization studies, a COMSOLTM sim

Style APA, Harvard, Vancouver, ISO itp.

7

Ben, Aissa Soler Alejandra. "Rapid diagnostic test for the detection of communicable diseases." Doctoral thesis, TDX (Tesis Doctorals en Xarxa), 2020. http://hdl.handle.net/10803/670392.

Pełny tekst źródła

Streszczenie:

La prevenció i el control de les malalties transmissibles depenen, en gran mesura, de la detecció ràpida i eficaç. Els mètodes convencionals per a la detecció d'un patogen, com ara el cultiu microbiològic, generalment requereixen molt de temps, són laboriosos, necessiten personal qualificat i no són aptes com a eines de diagnòstic en el punt d'atenció. El desenvolupament de mètodes de diagnòstic ràpid en el marc dels criteris ASSURED, de l'anglès (A) Affordable, (SS) Sensitive i Didàctiques, (O) User-friendly, (R) Rapid and Robust, (I) Equipment free, and (d) Deliverable to those who need i

Style APA, Harvard, Vancouver, ISO itp.

8

Mitchell, Haydn Thomas. "AN INVESTIGATION OF POLY(N-ISOPROPYLACRYLAMIDE) FOR APPLICATIONS WITH MICROFLUIDIC PAPER-BASED ANALYTICAL DEVICES." DigitalCommons@CalPoly, 2014. https://digitalcommons.calpoly.edu/theses/1248.

Pełny tekst źródła

Streszczenie:

N,N′-methylenebisacrylamide-crosslinked poly(N-isopropylacrylamide), also known as P(NIPAM), was developed as a fluid delivery system for use with microfluidic paper-based analytical devices (microPADs). MicroPADs are postage-stamp-sized devices made out of paper that can be used as platforms for low-cost, simple-to-use point-of-care diagnostic assays. P(NIPAM) is a thermally responsive polymer that absorbs aqueous solutions at room temperature and will expel the solutions to microPADs when heated. The fluid delivery characteristics of P(NIPAM) were assessed, and P(NIPAM) was able to deliver m

Style APA, Harvard, Vancouver, ISO itp.

9

Morbioli, Giorgio Gianini. "Funcionalização de celulose para ensaios bioanalíticos em dispositivos microfluídicos baseados em papel (μPADs)." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/75/75135/tde-23062015-105938/.

Pełny tekst źródła

Streszczenie:

A funcionalização da matriz celulósica é um ponto essencial para o aprimoramento dos dispositivos microfluídicos baseados em papel (µPADs). Ela permite minimizar o preparo de amostras e a interferência do usuário, principais fontes de erro no processo analítico. A oxidação da celulose durante uma hora com m-periodato de sódio e a imobilização química de enzimas a partir da formação de bases de Schiff (iminas), via a adição direta da enzima ao substrato oxidado sem a necessidade de outras etapas, é um processo rápido e de baixo custo, apresentando grande potencialidade de aplicação nos di

Style APA, Harvard, Vancouver, ISO itp.

10

Braff, Dana. "Technological advancements towards paper-based biomolecular diagnostics." Thesis, 2017. https://hdl.handle.net/2144/27009.

Pełny tekst źródła

Streszczenie:

Clinically tractable diagnostics must be low-cost, rapid, sensitive, easy to use, and adaptable to new targets. With its rational design, synthetic biology holds promise for developing diagnostic technologies that can address these needs. In particular, progress in synthetic biology has led to improved circuit-building abilities and a large collection of biomolecular sensors. However, these technologies fundamentally require transcription and translation, limiting their applicability to cellular contexts In vitro cell-free expression systems that contain transcription and translation machiner

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!