Gotowe bibliografie tematyczne / Particle Size Distribution Analysis

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Particle Size Distribution Analysis”

Autor: Grafiati
Data publikacji: 3 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Particle Size Distribution Analysis”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Particle Size Distribution Analysis"

1

Ferguson, J. R., and D. E. Stock. "“Heavy” Particle Dispersion Measurements With Mono- and Polydisperse Particle Size Distributions." Journal of Fluids Engineering 115, no. 3 (1993): 523–26. http://dx.doi.org/10.1115/1.2910170.

Pełny tekst źródła
Streszczenie:
A method is presented to estimate the effects of a polydisperse particle size distribution on the measured turbulent dispersion of particles. In addition, the analysis provides a means to estimate the standard deviation of the size distribution for which a class of particles may be considered monodisperse. If monodisperse particles are unavailable because of practical considerations (e.g., the required standard deviation of particle size is too small to obtain a sufficient quantity) then the method provides a means to correct the data of near monodisperse size distributions to reflect the disp
Style APA, Harvard, Vancouver, ISO itp.
2

Vítěz, T., and P. Trávníček. "Particle size distribution of sawdust and wood shavings mixtures." Research in Agricultural Engineering 56, No. 4 (2010): 154–58. http://dx.doi.org/10.17221/8/2010-rae.

Pełny tekst źródła
Streszczenie:
Particle size distribution of the sample of waste sawdust and wood shavings mixtures were made with two commonly used methods of mathematical models by Rosin-Rammler (RR model) and by Gates-Gaudin-Schuhmann (GGS model).On the basis of network analysis distribution function F (d) (mass fraction) and density function f (d) (number of particles captured between two screens) were obtained. Experimental data were evaluated using the RR model and GGS model, both models were compared. Better results were achieved with GGS model, which leads to a more accurate separation of the different particle size
Style APA, Harvard, Vancouver, ISO itp.
3

Yuan, Fangyang, and Fujun Gan. "Evolution of Aerosol Particles in the Rainfall Process via Method of Moments." Abstract and Applied Analysis 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/709497.

Pełny tekst źródła
Streszczenie:
The method of moments is employed to predict the evolution of aerosol particles in the rainfall process. To describe the dynamic properties of particle size distribution, the population balance equation is converted to moment equations by the method of moments and the converted equations are solved numerically. The variations of particle number concentration, geometric mean diameter, and geometric standard deviation are given in the cases that the Brownian diffusion and inertial impaction of particles dominate, respectively. The effects of raindrop size distribution on particle size distributi
Style APA, Harvard, Vancouver, ISO itp.
4

Finder, Christiane, Michael Wohlgemuth, and Christian Mayer. "Analysis of Particle Size Distribution by Particle Tracking." Particle & Particle Systems Characterization 21, no. 5 (2004): 372–78. http://dx.doi.org/10.1002/ppsc.200400948.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Krawczykowski, Damian, Aldona Krawczykowska, and Tomasz Gawenda. "Comparison of Geometric Properties of Regular and Irregular Mineral Grains by Dynamic Image Analysis (2D) and Optoelectronic Analysis (3D) Methods." Minerals 12, no. 5 (2022): 540. http://dx.doi.org/10.3390/min12050540.

Pełny tekst źródła
Streszczenie:
The properties of bulk materials are influenced by geometrical features of grains such as size, size distribution and shape. However, size is an ambiguous parameter for non-spherical particles. Therefore, the influence of the shape of a particle on its size, as described by various measuring methods and estimators using the main particle dimensions, was studied here. Granulometric analyses of mineral raw material samples containing regular and irregular grains were performed as part of the research. The measurements were made using two methods: the dynamic image analysis and the optoelectronic
Style APA, Harvard, Vancouver, ISO itp.
6

He, Li Jun, De Mei Xu, Nan Hu, et al. "Model Analysis on Particles Size Distribution of Beryllium Powder." Applied Mechanics and Materials 268-270 (December 2012): 336–39. http://dx.doi.org/10.4028/www.scientific.net/amm.268-270.336.

Pełny tekst źródła
Streszczenie:
A physics model was established for describing the particle size distribution of beryllium (Be) powder produced by impact attrition milling. In this model, two factors were considered: the first, the distribution of existing state of particles with different original kinetic energy should obey the Maxwell-Boltzmann statistics after impacted, it was that, being at higher energy level made big particles unstable, which were easy to be fractured into smaller pieces in impact attrition process, this influencing factor described as the negative exponential of particles size; the second, the tendenc
Style APA, Harvard, Vancouver, ISO itp.
7

Li, Zheng Min, Zhi Wei Chen, Min Tan, Ke Jing Xu, and Bing Jiang. "Determination of Particle Size Distribution of Nano-TiO2 Coating Film by AFM and Image Analysis." Advanced Materials Research 177 (December 2010): 22–24. http://dx.doi.org/10.4028/www.scientific.net/amr.177.22.

Pełny tekst źródła
Streszczenie:
Nano-TiO2 coating film is one of the efficient photocatalysts. The particle size distribution of TiO2 has important influence on photocatalytic activity. A new method to determine the particle size distribution of TiO2 nano-film coated on ceramic was developed, by which the images of film acquired by Atom force microscope (AFM) were processed, and TiO2 particles contacted with others were separated and detected. The particle size distributions of two TiO2 nano-films were determined.
Style APA, Harvard, Vancouver, ISO itp.
8

Welker, Roger. "Size Distributions of Particles Extracted from Different Materials Compared with the MIL-STD-1246 Particle Size Distribution." Journal of the IEST 43, no. 4 (2000): 25–29. http://dx.doi.org/10.17764/jiet.43.4.b9490831l54t44wt.

Pełny tekst źródła
Streszczenie:
MIL-STD-1246 particle-size distribution is the basis for specifying the particle cleanliness of surfaces for many governmental and industrial applications. MIL-STD-1246 states that naturally occurring particle contamination on surfaces follows a log-normal particle-size distribution, with a geometric mean of 1 μm, following a very precise size specification. However, the naturally occurring particle-size distribution may be a function of the material under examination or the prior cleaning or surface treatment history of the material. This paper explores the relation between the MIL-STD-1246 p
Style APA, Harvard, Vancouver, ISO itp.
9

Rahimi, Abbas, Andy Cordonier, and Abhilash J. Chandy. "Particle Distribution Statistics in CFD Modeling of Polymer Processing." Applied Mechanics and Materials 704 (December 2014): 12–16. http://dx.doi.org/10.4028/www.scientific.net/amm.704.12.

Pełny tekst źródła
Streszczenie:
This study presents statistical analysis of particle size distribution from a CFD simulation of polymer devolatilization in contactor, that uses superheated steam to isolate the polymers. This is accomplished by estimating marginal distributions of particle size and temperature using maximum Shannon Entropy theory and capturing their dependence structure by employing Copula thoery. The Copula-based conditional distribution of particles at different temperatures reveals the strong dependence of particle size to heat exchange and corresponding temperature.
Style APA, Harvard, Vancouver, ISO itp.
10

Wong, Jia Chyi, Li Xiang, Kuan Hoon Ngoi, Chin Hua Chia, Kyeong Sik Jin, and Moonhor Ree. "Quantitative Structural Analysis of Polystyrene Nanoparticles Using Synchrotron X-ray Scattering and Dynamic Light Scattering." Polymers 12, no. 2 (2020): 477. http://dx.doi.org/10.3390/polym12020477.

Pełny tekst źródła
Streszczenie:
A series of polystyrene nanoparticles (PS-1, PS-2, PS-3, and PS-4) in aqueous solutions were investigated in terms of morphological structure, size, and size distribution. Synchrotron small-angle X-ray scattering analysis (SAXS) was carried out, providing morphology details, size and size distribution on the particles. PS-1, PS-2, and PS-3 were confirmed to behave two-phase (core and shell) spherical shapes, whereas PS-4 exhibited a single-phase spherical shape. They all revealed very narrow unimodal size distributions. The structural parameter details including radial density profile were det
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Particle Size Distribution Analysis"

1

Patel, Ketan Shantilal. "Vibro-spring particle size distribution analyser." Thesis, University College London (University of London), 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.252097.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Wanogho, S. O. "The forensic analysis of soils with particular reference to particle size distribution analysis." Thesis, University of Strathclyde, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.381113.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Svoboda, Svetozár. "Vyhodnocení kontaminace pracovního prostředí aerosoly řezných kapalin při soustružení kovů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318769.

Pełny tekst źródła
Streszczenie:
The thesis deals with the contamination of the workspace with a liquid aerosol, which is generated by scattering and evaporation of the cooling fluid. Cooling fluid are primarily intended to lubricate, cool and clean the tool and the workpiece, but the unwanted side effect is the formation of a liquid aerosol that holds in the air of the workspace. In such a contaminated work environment, the operator is exposed to a certain dose of a liquid aerosol that causes dermatological and respiratory problems. The topic of the thesis was to find out the number of particles of liquid aerosol that arises
Style APA, Harvard, Vancouver, ISO itp.
4

Wangsa-Wirawan, Norbertus Djajasantosa. "Physicochemical properties of protein inclusion bodies." Title page, contents and introduction only, 1999. http://web4.library.adelaide.edu.au/theses/09PH/09phw2465.pdf.

Pełny tekst źródła
Streszczenie:
Bibliography: leaves 182-198. Improvements in the current production system of inclusion bodies and the downstream processing sequence are essential to maintain a competitive advantage in the market place. Optimisation of fermentation is considered to improve production yield; then flotation as a possible inclusion body recovery method.
Style APA, Harvard, Vancouver, ISO itp.
5

Dalecky, Amanda Lee. "Particle Size Distribution Analysis of a Mining-Impacted Gravel-Bed Stream in Ohio Using a Hybrid Sediment Sampling Technique." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/35721.

Pełny tekst źródła
Streszczenie:
As part of a risk assessment study of the Leading Creek Watershed in Ohio, a prior Virginia Tech researcher collected pavement and subpavement sediment samples at 17 sites using the hybrid areal sampling technique with a clay adhesive. The watershed, which is heavily impacted by mining and agricultural activities, suffers from low pH, high concentrations of metals and sediment in the water column, and excessively silted streambeds. The current work presents the results of the particle size analyses performed on the hybrid samples in the context of evaluating the effectiveness of the techniqu
Style APA, Harvard, Vancouver, ISO itp.
6

Guidi, Lionel. "Particle flux transformation in the mesopelagic water column: process analysis and global balance." Diss., Texas A&M University, 2008. http://hdl.handle.net/1969.1/85946.

Pełny tekst źródła
Streszczenie:
Marine aggregates are an important means of carbon transfers downwards to the deep ocean as well as an important nutritional source for benthic organism communities that are the ultimate recipients of the flux. During these last 10 years, data on size distribution of particulate matter have been collected in different oceanic provinces using an Underwater Video Profiler. The cruise data include simultaneous analyses of particle size distributions as well as additional physical and biological measurements of water properties through the water column. First, size distributions of large aggregate
Style APA, Harvard, Vancouver, ISO itp.
7

Rahman, Md Mahmudur. "Investigations into source contributions and spatial distribution of airborne pollutants in an urban airshed by the development and application of advanced statistical models." Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/108952/2/Md_Mahmudur_Rahman_Thesis.pdf.

Pełny tekst źródła
Streszczenie:
This thesis developed novel statistical modelling methods to quantify airborne gaseous and particle concentrations and their source contribution in an urban area; in particular, developed a novel Land Use Regression (LUR) model for predicting the daily average concentration of airborne gaseous concentrations, a novel Bayesian modelling approach to quantify airborne ultrafine particle source contribution, and a geostatistical modelling approach for quantifying spatial concentrations of airborne pollutants. Besides, nighttime new particle formation mechanism and their physical properties have be
Style APA, Harvard, Vancouver, ISO itp.
8

Mazzini, Martina. "Analysis of the aerosol number size distribution variability and characterization of new particle formation events at Monte Cimone GAW global station." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/23221/.

Pełny tekst źródła
Streszczenie:
The aim of this thesis is to obtain long-term information on aerosol number size distribution and new particle formation at the Mt. Cimone GAW global station (CMN, 2165 m a.s.l.) to better assess how aerosols impact on Earth system. The size distribution of particles ranging from 9nm to 500nm was continuously observed with a DMPS from November 2005 to July 2013 in the framework of EUSAAR and ACTRIS projects. Size distribution and number concentration are studied at different time scales, together with occurrences of new particle formation (NPF). CMN typical aerosol number size distribution is
Style APA, Harvard, Vancouver, ISO itp.
9

Attili, Bassam Saleem. "Particle size distribution and qualitative/quantitative analysis of trace metals in the combustion gas and fly ash of coal/refuse derived fuel." Thesis, University of North Texas, 1991. https://digital.library.unt.edu/ark:/67531/metadc332571/.

Pełny tekst źródła
Streszczenie:
This work includes two different areas of research. Both areas are related to the combustion of the binder-enhanced densified refuse derived fuel (bdRDF) with high sulfur coal and examining trace elements. The first area of this work involved studying the trace metals in the combustion gas of bdRDF/coal blend and the effect of the binder, CA(OH)2, on reducing the trace elements emissions. The second area of work involved studying the trace elements in the fly ash and the effect of the dRDF and the binder of trace metals.
Style APA, Harvard, Vancouver, ISO itp.
10

Dutson, Andrew S. "A Multifaceted Sedimentological Analysis on Hobble Creek." BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/2625.

Pełny tekst źródła
Streszczenie:
Due to the endangerment of the June sucker (Chasmistes liorus), the lower two miles of Hobble Creek, Utah has been the focus of several restoration efforts. The portion of the creek between Interstate 15 and Utah Lake has been moved into a more "natural" channel and efforts are now being made to expand restoration to the east side of the freeway. This thesis reports on three different parts of a sedimentological analysis performed on Hobble Creek. The first part is a data set that contains information about the particle size distribution on the bed of Hobble Creek between 400 W and Interstate
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Particle Size Distribution Analysis"

1

P, Lodge James, Chan T. L, and American Industrial Hygiene Association, eds. Cascade impactor: Sampling & data analysis. American Industrial Hygiene Association, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Koskinen, Jukka Tapio. Use of population balances and particle size distribution analysis to study particulate processes affected by simultaneous mass and heat transfer an nonuniform flow conditions. Lappeenranta University of Technology, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

F, Ferraris Chiara, and National Institute of Standards and Technology (U.S.), eds. Analysis of the ASTM round-robin test on particle size distribution of Portland cement: Phase 2. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2002.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Bunte, Kristin. Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring. U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Research Station, 2001.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Bunte, Kristin. Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring. U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Research Station, 2001.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Bunte, Kristin. Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring. U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Research Station, 2001.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Provder, Theodore, ed. Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Stanley-Wood, N. G., and R. W. Lines, eds. Particle Size Analysis. Royal Society of Chemistry, 1992. http://dx.doi.org/10.1039/9781847551627.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Bernhardt, Claus. Particle Size Analysis. Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-1238-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

N, Stanley-Wood, Lines R. W, and Royal Society of Chemistry (Great Britain). Particle Characterisation Group. Conference, eds. Particle size analysis. Royal Society of Chemistry, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Particle Size Distribution Analysis"

1

Koehler, M. E., and Theodore Provder. "Comparative Particle Size Analysis." In Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.ch016.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Beddow, J. K. "Size, Shape, and Texture Analysis." In Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.ch001.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Thornton, Anthony W., James P. Olivier, Cindy G. Smart, and Lee B. Gilman. "Particle Size Distribution Analysis of Colloidal Latices Using Hydrodynamic Chromatography." In Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.ch018.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Holsworth, R. M., Theodore Provder, and J. J. Stansbrey. "External-Gradient-Formation Method for Disc Centrifuge Photosedimentometric Particle Size Distribution Analysis." In Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.ch013.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Koehler, M. E., R. A. Zander, T. Gill, Theodore Provder, and T. F. Niemann. "An Improved Disc Centrifuge Photosedimentometer and Data System for Particle Size Distribution Analysis." In Particle Size Distribution. American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0332.ch012.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Junwu, Zhou, and Xu Kuangdi. "Online Analysis of Particle Size Distribution in Slurry." In The ECPH Encyclopedia of Mining and Metallurgy. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-0740-1_842-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Sanchís, Josep, Marinella Farré, and Damià Barceló. "Analysis of Nanomaterials by Particle Size Distribution Methods." In Nanomaterials in the Environment. American Society of Civil Engineers, 2015. http://dx.doi.org/10.1061/9780784414088.ch05.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Mir, Bashir Ahmed. "Particle Size Distribution Analysis by the Hydrometer Method." In Manual of Geotechnical Laboratory Soil Testing. CRC Press, 2021. http://dx.doi.org/10.1201/9781003200260-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Pradeep, Pragnya, M. Y. Aravind Rao, J. Dharanish, R. Bheemraj, P. Rajeshwari, and S. Seetharamu. "Particle Size Distribution Analysis and Characterization of Cenospheres." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9613-8_57.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Junwu, Zhou. "Online Analysis of Particle Size Distribution in Slurry." In The ECPH Encyclopedia of Mining and Metallurgy. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-2086-0_842.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Particle Size Distribution Analysis"

1

Paseka$$, Stanislav. "Assessing Repeatability and Precision of Dosing Techniques in Soil Particle Size Distribution Analysis Using Laser Diffraction." In Contemplating Earth …Soil and Landscape 2024. Mendel University in Brno, 2025. https://doi.org/10.11118/978-80-7701-024-5-0033.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Verma, Vikas, Jayanti Ballabh, Shivam Saraswat, Dharani Chandra Prakash, and Siva Prasada Raju Vundi. "Comparative analysis of dust particle size in Rajasthan: A study with particle size distribution analysis." In 5TH INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING ASPECTS FOR SUSTAINABLE ENERGY – 2023 (5ICMED2023). AIP Publishing, 2025. https://doi.org/10.1063/5.0263698.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kanaev, A. T., A. T. Smagali, T. A. Dippel, and A. R. Rinar. "DISTRIBUTION OF GOLD ORE BY SIZE CLASS USING PARTICLE SIZE ANALYSIS." In Международная научно-практическая конференция почвоведов, агрохимиков и земледелов, посвященная 90-летию почвоведения на Урале "Почвы Урала и Поволжья: экология и плодородие". Башкирский государственный аграрный университет, 2021. http://dx.doi.org/10.31563/3-6-6-2021-67-70.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Shibata, K., S. Koshizuka, and Y. Oka. "Numerical Analysis of Droplet Size Distribution Using Particle Method." In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45165.

Pełny tekst źródła
Streszczenie:
A continuous jet changes to droplets where jet breakup occurs. In this study, two-dimensional numerical analysis of jet breakup is performed using MPS method (Moving Particle Semi-implicit Method) which is a particle method for incompressible flows. The continuous fluid surrounding the jet is neglected. The size distribution of droplets is in agreement with the Nukiyama-Tanasawa distribution which has been widely used as an experimental correlation. Effects of the Weber number and the Froude number on the size distribution are also obtained from the calculation.
Style APA, Harvard, Vancouver, ISO itp.
5

Zhang, Qihang, Janaka C. Gamekkanda, Ajinkya Pandit, et al. "Quantitative Speckle Analysis to Estimate Surface Particle Size Distribution." In Computational Optical Sensing and Imaging. Optica Publishing Group, 2023. http://dx.doi.org/10.1364/cosi.2023.cw5b.4.

Pełny tekst źródła
Streszczenie:
We established a relationship between speckle autocorrelations and surface statistics. A machine learning algorithm is developed based on this relationship to estimate the powder particle size distribution from laser speckle patterns.
Style APA, Harvard, Vancouver, ISO itp.
6

Lai, Bitao, Jihong Wang, Wenwu He, and Zhipeng Wan. "Enhancing Dispersion Test Analysis for Shale Drilling: Particle Size Distribution and Cation Exchange Insights." In SPE International Conference and Exhibition on Formation Damage Control. SPE, 2024. http://dx.doi.org/10.2118/217889-ms.

Pełny tekst źródła
Streszczenie:
Abstract Dispersion, which poses a significant challenge to wellbore stability during shale drilling, is influenced by various factors such as shale petrological and mechanical properties, as well as shale-fluid interactions. The effectiveness of shale inhibitors in alleviating these interactions has traditionally been evaluated using the standardized conventional dispersion test. In this test, measured quantities of sized shale particles are exposed to formulated fluids in a roller-oven cell for a specified duration. Subsequently, the shale particles are washed, dried, and the recovery percen
Style APA, Harvard, Vancouver, ISO itp.
7

Velmurugan, Naveen, Prakhar Mathur, and Vinay Babu. "Particle Size Distribution in Casing While Drilling: A Quantitative Analysis." In Abu Dhabi International Petroleum Exhibition and Conference. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/177679-ms.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Wang, Yang, and Francis J. Doyle. "Reachability analysis of particle size distribution in semibatch emulsion polymerization." In 2003 European Control Conference (ECC). IEEE, 2003. http://dx.doi.org/10.23919/ecc.2003.7085066.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Daun, K. J., B. J. Stagg, F. Liu, G. J. Smallwood, and D. R. Snelling. "Determining Aerosol Particle Size Distribution Using Time-Resolved Laser-Induced Incandescence." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13595.

Pełny tekst źródła
Streszczenie:
Time-resolved laser-induced incandescence is a powerful tool for determining the physical characteristics of aerosol dispersions of refractory nano-particles. In this procedure, particles within a small aerosol volume are heated with a nano-second laser pulse, and the temporal incandescence of the particles is then measured as they return to the ambient gas temperature. It is possible to infer particle size distribution from the temporal decay of the LII signal since the cooling rate of an individual particle depends on its area-to-volume ratio. This requires solving a mathematically ill-posed
Style APA, Harvard, Vancouver, ISO itp.
10

Sun, Zhenping, Yi Liu, Liangliang Shui, Xiaobo Tang, Yaowu Dong, and Dangyi Li. "Grey Connection Analysis between Cement Particle Size Distribution and Compressive Strength." In 2015 International Conference on Architectural, Civil and Hydraulics Engineering. Atlantis Press, 2015. http://dx.doi.org/10.2991/icache-15.2015.12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Particle Size Distribution Analysis"

1

Bigl, Matthew, Samuel Beal, and Charles Ramsey. Determination of residual low-order detonation particle characteristics from Composition B mortar rounds. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/45260.

Pełny tekst źródła
Streszczenie:
Empirical measurements of the spatial distribution, particle-size distribution, mass, morphology, and energetic composition of particles from low-order (LO) detonations are critical to accurately characterizing environ-mental impacts on military training ranges. This study demonstrated a method of generating and characterizing LO-detonation particles, previously applied to insensitive munitions, to 81 mm mortar rounds containing the conventional explosive formulation Composition B. The three sampled rounds had estimated detonation efficiencies ranging from 64% to 82% as measured by sampled res
Style APA, Harvard, Vancouver, ISO itp.
2

Patterson, Philip, and William Lum. Laser Scattering Particle Size Distribution Analyses of Pigments. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada353710.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Tanthapanichakoon, Wiwut. Development of phase doppler anemometer for measuring velocity and size distribution of paticulate materials. Chulalongkorn University, 2004. https://doi.org/10.58837/chula.res.2004.72.

Pełny tekst źródła
Streszczenie:
Particle size analysis is an essential analytical task in a large variety of processes of industrial and laboratorial relevance. Phase doppler anemometer (PDA) is one of well-established techniques allowing simultaneous measurement of velocity and size of particles, droplets, or bubbles in two-phase flows including spray atomization. The method is based upon the principle of light scattering interferometry. When a particle passes through the probe volume defined by the intersection of two laser beams, the phase of the light scattered by the particle carries information about the particle size,
Style APA, Harvard, Vancouver, ISO itp.
4

Głąb, Tomasz, Jarosław Knaga, Tomasz Zaleski, Paweł Dziwisz, Jan Gluza, and Dariusz Glanas. Determination of soil particle size distribution using computer analysis of microscopic images. Publishing House of the University of Agriculture in Krakow, 2025. https://doi.org/10.15576/repourk/2025.1.3.

Pełny tekst źródła
Streszczenie:
The project aims to develop a prototype device for determining the texture of soils and mineral deposits. The innovation of the designed solution consists in a significant reduction in the time of composition analysis with the possibility of any division into granulometric groups and the complete automation of the measurement from the moment the sample is introduced into the apparatus until the result is obtained. As part of the project, industrial research and experimental development are planned to be divided into the following stages: 1. Development of the measuring system. 2. Development o
Style APA, Harvard, Vancouver, ISO itp.
5

Noel, Erika, Giulia Mattana, and Anthony McGoron. A Comparative Analysis of Nanoparticle Sizing Techniques for Enhanced Drug Delivery Applications. Florida International University, 2025. https://doi.org/10.25148/fiuurj.3.1.5.

Pełny tekst źródła
Streszczenie:
Nanoparticle-based drug delivery systems hold promise for improving therapeutic efficacy and targeting precision. However, a critical challenge in their development is ensuring size stability, as particle size directly influences biodistribution, cellular uptake, and drug release profiles. This study establishes a streamlined methodology to assess nanoparticle size consistency by comparing three widely used characterization techniques: Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM), and Nanoparticle Tracking Analysis (NTA). Two types of nanoparticles were analyzed: 100
Style APA, Harvard, Vancouver, ISO itp.
6

Bigl, Matthew, Samuel Beal, and Charles Ramsey. Determination of residual low-order detonation particle characteristics from IMX-104 mortar rounds. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42163.

Pełny tekst źródła
Streszczenie:
The environmental fate and transport of energetic compounds on military training ranges are largely controlled by the particle characteristics of low-order detonations. This study demonstrated a method of command detonation, field sampling, laboratory processing, and analysis techniques for characterizing low-order detonation particles from 60 mm and 81 mm mortar rounds containing the insensitive munition formulation IMX-104. Particles deposited from three rounds of each caliber were comprehensively sampled and characterized for particle size, energetic purity, and morphology. The 60 mm rounds
Style APA, Harvard, Vancouver, ISO itp.
7

Ferraris, Chiara F., Vincent A. Hackley, Ana Ivelisse Avilés, and Charles E. Jr Buchanan. Analysis of the ASTM round-robin test on particle size distribution of Portland cement:. National Institute of Standards and Technology, 2002. http://dx.doi.org/10.6028/nist.ir.6883.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ferraris, Chiara F., Vincent A. Hackley, Ana Ivelisse Avilés, and Charles E. Jr Buchanan. Analysis of the ASTM round-robin test on particle size distribution of Portland cement:. National Institute of Standards and Technology, 2002. http://dx.doi.org/10.6028/nist.ir.6931.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Sullivan, Gregg K. Plastic Bonded Explosive (PBX) Particle Size Distribution (PSD) Measurements Using an Image Analysis System. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/818148.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Zhang, Xingyu, Matteo Ciantia, Jonathan Knappett, and Anthony Leung. Micromechanical study of potential scale effects in small-scale modelling of sinker tree roots. University of Dundee, 2021. http://dx.doi.org/10.20933/100001235.

Pełny tekst źródła
Streszczenie:
When testing an 1:N geotechnical structure in the centrifuge, it is desirable to choose a large scale factor (N) that can fit the small-scale model in a model container and avoid unwanted boundary effects, however, this in turn may cause scale effects when the structure is overscaled. This is more significant when it comes to small-scale modelling of sinker root-soil interaction, where root-particle size ratio is much lower. In this study the Distinct Element Method (DEM) is used to investigate this problem. The sinker root of a model root system under axial loading was analysed, with both upw
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Particle Size Distribution Analysis” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii