Gotowe bibliografie tematyczne / Plats complets

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Plats complets”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 30 stycznia 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Plats complets”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Plats complets"

Keeling, Patrick J., Hans-Peter Klenk, Rama K. Singh, Oisin Feeley, Christa Schleper, Wolfram Zillig, W. Ford Doolittle i Christoph W. Sensen. "Complete Nucleotide Sequence of theSulfolobus islandicusMulticopy Plasmid pRN1". Plasmid 35, nr 2 (marzec 1996): 141–44. http://dx.doi.org/10.1006/plas.1996.0016.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ahn, Byeonguk, Thomas H. K. Kang, Su-Min Kang i Jang Keun Yoon. "Punching Shear Stress in Post-Tensioned Transfer Plate of Multi-Story Buildings". Applied Sciences 10, nr 17 (31.08.2020): 6015. http://dx.doi.org/10.3390/app10176015.

Pełny tekst źródła

Streszczenie:

The design of a post-tensioned transfer plate is typically controlled by shear force—in particular, punching shear at the slab-column connection. To verify the accuracy of the separated model only for one floor currently used in the design of a post-tensioned transfer plate, results were compared to a complete model with multi-story building system for which two representative residential building plans were used to emulate physical structural systems. Punching shear stress for the separated model was calculated using the eccentric shear stress model presented in ACI 318. Punching shear stress was found to be overestimated in the separated model, given that interaction between transfer plates and upper shear walls cannot be reflected therein. Differences at column locations were also noted as the number of stories below the transfer floor increased. Consequently, the separated model is not recommended for design of post-tensioned transfer plates. A complete model is more suitable for more realistic and potential cost-effective design, through the inclusion of the interaction between transfer plates and upper shear walls.

Style APA, Harvard, Vancouver, ISO itp.

Tu, Anh-Hue T., LeRoy L. Voelker, Xuejun Shen i Kevin Dybvig. "Complete Nucleotide Sequence of the Mycoplasma Virus P1 Genome". Plasmid 45, nr 2 (marzec 2001): 122–26. http://dx.doi.org/10.1006/plas.2000.1501.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Landrum, R. Eric, Heather Carlson i Wendy Manwaring. "The Relationship between Time to Complete a Test and Test Performance". Psychology Learning & Teaching 8, nr 2 (1.01.2009): 53–56. http://dx.doi.org/10.2304/plat.2009.8.2.53.

Pełny tekst źródła

Streszczenie:

One hundred eighty-three students enrolled in an undergraduate psychology statistics course completed three tests comprised of different amounts of closed book and open book test items. For these tests, students also recorded their test completion time, for extra credit. We then combined course-based student data with preexisting demographic variables. We found that test completion time was sometimes negatively correlated with test performance, but not consistently so. Student age was positively correlated with test completion time, and prior term grade point average (GPA) and prior cumulative GPA were both positively correlated with test performance. We discuss these results by exploring possible reasons for the inconsistent relationship between test completion time and test performance, and the advice we might give to students regarding these matters.

Style APA, Harvard, Vancouver, ISO itp.

Lawley, Trevor D., Valerie Burland i Diane E. Taylor. "Analysis of the Complete Nucleotide Sequence of the Tetracycline-Resistance Transposon Tn10". Plasmid 43, nr 3 (maj 2000): 235–39. http://dx.doi.org/10.1006/plas.1999.1458.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhou, Xianghong, Page W. Caufield, Yihong Li i Fengxia Qi. "Complete Nucleotide Sequence and Characterization of pUA140, a Cryptic Plasmid from Streptococcus mutans". Plasmid 46, nr 2 (wrzesień 2001): 77–85. http://dx.doi.org/10.1006/plas.2001.1539.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Louis, Petra, i Erwin A. Galinski. "Identification of Plasmids in the GenusMarinococcusand Complete Nucleotide Sequence of Plasmid pPL1 fromMarinococcus halophilus". Plasmid 38, nr 2 (wrzesień 1997): 107–14. http://dx.doi.org/10.1006/plas.1997.1304.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Dong, Xing Qi, Luther E. Lindler i May C. Chu. "Complete DNA Sequence and Analysis of an Emerging Cryptic Plasmid Isolated from Yersinia pestis". Plasmid 43, nr 2 (marzec 2000): 144–48. http://dx.doi.org/10.1006/plas.1999.1432.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Majidi, Carmel, i Ronald S. Fearing. "Adhesion of an elastic plate to a sphere". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 464, nr 2093 (19.02.2008): 1309–17. http://dx.doi.org/10.1098/rspa.2007.0341.

Pełny tekst źródła

Streszczenie:

Stationary principles and the von Kármán plate theory are used to study the adhesion of thin elastic plates to a rigid sphere. Contact requires both flexural and membrane strains that can lead to partial or complete delamination. Interestingly, whereas a large area plate might spontaneously delaminate from the sphere, dividing this plate into many smaller plates with equivalent thickness eliminates membrane strains and may allow complete contact. The theoretical predictions are compared to experimental results for low density polyethylene on a smooth glass sphere. The peel strength is estimated with a modified Kendall peel equation.

Style APA, Harvard, Vancouver, ISO itp.

Kataoka, Masakazu, Yuka Miura Kiyose, Yuji Michisuji, Takashi Horiguchi, Tatsuji Seki i Toshiomi Yoshida. "Complete Nucleotide Sequence of the Streptomyces nigrifaciens Plasmid, pSN22: Genetic Organization and Correlation with Genetic Properties". Plasmid 32, nr 1 (lipiec 1994): 55–69. http://dx.doi.org/10.1006/plas.1994.1044.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Plats complets"

Hyardin, Aude. "Étude de la fonctionnalité alimentaire de plats industriels". Thesis, Vandoeuvre-les-Nancy, INPL, 2008. http://www.theses.fr/2008INPL038N/document.

Pełny tekst źródła

Streszczenie:

Consommateurs, chercheurs et industriels cherchent de plus en plus à associer à la valeur nutritionnelle des aliments, un effet bénéfique pour la santé. Les aliments caractérisés par des pouvoirs antioxydants élevés semblent correspondre à cette demande. En effet, plusieurs travaux mentionnent les bénéfices santé de ces aliments. Pour répondre à cette demande les industriels mettent en avant ce critère. La fonctionnalité alimentaire, aux bénéfices prometteurs pour la santé publique, reste un concept néanmoins complexe dans la pratique. Ce travail met l’accent sur le fait que les propriétés fonctionnelles d’un aliment ne sont pas directement liées à la composition en ingrédients. L’évaluation du pouvoir antioxydant d'un aliment est dans la plupart des cas réalisée à partir des valeurs des différents ingrédients avant formulation et mise en œuvre des procédés. Pourtant, plusieurs phénomènes sont susceptibles de modifier le pouvoir antioxydant lors de la durée de vie d'un produit alimentaire. D’un point de vue industriel, il est nécessaire de développer une méthode de prédiction de cette activité. Les objectifs de ce travail étaient d’adapter une méthode reproductible et facile à réaliser de quantification du pouvoir antioxydant sur des aliments complexes et de comparer cet index d'un ensemble de produits contenant une large gamme de matières premières. Enfin, a été discuté l’intérêt que représente, dans le domaine des propriétés anti oxydantes, la quantification de l’index créé. Au moment où les industriels vont être amenés à proposer des allégations liées à l’effet bénéfique de l’aliment choisi parmi un échantillon de plus en plus ample
Consumers, researchers and industrialists try more and more to associate with the nutritional value of food, a beneficial effect for the health. Food characterized by high antioxidant powers seems to correspond to this demand. From an industrial point of view, it is necessary to develop methods of predicting this antioxidant capacity. The objectives of this work were to adapt a method reproducible and easy to realize of quantification of the antioxidant power on complex food and to compare this index of a set of products containing a wide range of raw materials. Until now, it has been considered that the use of raw materials characterized by a high antioxidant capacity also leads to a preparation with a high antioxidant activity. We evaluated many of the factors affecting the antioxidant activity of convenience foods (phenol content, effects of formulation, culinary reheating, and preservation) and to provide data on convenience foods consumed by the French population. The total antioxidant capacity of the ethanolic extracts was evaluated by the method of the equivalent Trolox (TEAC) using the radical cation ABTS•+. The concentration of the total phenolic compounds of the same extracts was determined by the Folin-Ciocalteu method. The results show that the food matrix is an important factor for the modulation of activities of antioxidants. A standardised testing protocol for evaluating antioxidative effects is necessary. Then, we discussed the interest of an index, as the industrialists are going to be brought to claim to the beneficial effect of the food chosen among a more and more ample sample

Style APA, Harvard, Vancouver, ISO itp.

Tejada, Rosales Eva Maria. "Òxids complexes de coure i plata". Doctoral thesis, Universitat Autònoma de Barcelona, 2001. http://hdl.handle.net/10803/3115.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Johnston, James E. "Synthesis of control structures for complete chemical plants". Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/52937.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lakshmanan, Ramachandran. "Synthesis of operating procedures for complete chemical plants". Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14269.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Canales, Gonzalez Carolina. "Hypersurfaces Levi-plates et leur complément dans les surfaces complexes". Thesis, Université Paris-Saclay (ComUE), 2015. http://www.theses.fr/2015SACLS249/document.

Pełny tekst źródła

Streszczenie:

Dans ce mémoire nous étudions les hypersurfaces Levi-plates analytiques dans les surfaces algébriques complexes. Il s'agit des hypersurfaces réelles qui admettent un feuilletage par des courbes holomorphes, appelé le feuilletage de Cauchy Riemann (CR). Dans un premier temps nous montrons que si ce dernier admet une dynamique chaotique (i.e. s'il n'admet pas de mesure transverse invariante) alors les composantes connexes de l'extérieur de l'hypersurface sont des modifications de domaines de Stein. Ceci permet d'étendre le feuilletage CR en un feuilletage algébrique singulier sur la surface complexe ambiante. Nous appliquons ce résultat pour montrer, par l'absurde, qu'une hypersurface Levi-plate analytique qui admet une structure affine transverse dans une surface algébrique complexe possède une mesure transverse invariante. Ceci nous amène à conjecturer que les hypersurfaces Levi-plates dans les surfaces algébriques complexes qui sont difféomorphes à un fibré hyperbolique en tores sur le cercle sont des fibrations par courbes algébriques
In this work we study analytic Levi-flat hypersurfaces in complex algebraic surfaces. These are real hypersurfaces that admit a foliation by holomorphic curves, called Cauchy Riemann foliation (CR). First, we show that if this foliation admits chaotic dynamics (i.e. if it doesn't admit an invariant transverse measure), then the connected components of the complement of the hypersurface are Stein. This allows us to extend the CR foliation to a singular algebraic foliation on the ambient complex surface. We apply this result to prove, by contradiction, that analytic Levi-flat hypersurfaces admitting a transverse affine structure in a complex algebraic surface have a transverse invariant measure. This leads us to conjecture that Levi-flat hypersurfaces in complex algebraic surfaces that are diffeomorphic to a hyperbolic tori bundle over the circle are fibrations by algebraic curves

Style APA, Harvard, Vancouver, ISO itp.

Duran, i. Carpintero Josep. "Síntesi, caracterització i avaluació com a catalitzadors de nous complexos quirals de platí". Doctoral thesis, Universitat de Girona, 1999. http://hdl.handle.net/10803/8024.

Pełny tekst źródła

Streszczenie:

The oxidative addition proved to be a useful method to prepare platinum (II) hydridotiolate by reaction of tetrakis(triphenylphosphine)platinum(0) with aminothiolate and phosphinothiolate ligands like cysteamine, cysteine ethyl and methyl Esther, 2-(diphenylphosphino)ethanetiol and 2-(diphenylphosphino)propanetiol.
The complexes are square-planar and the aminothiolate or phosphinothiolate ligands are chelated to platinum (II). The hydrido ligand is trans to the sulfur and the other coordination position is occuped by a triphenylphosphine ligand. The complexes are mononuclear and they show low symmetry. The only symmetry element, the plan is broke if the ligand is branched, obtaining asymmetric complexes C1.
If the ligand has electronic or esteric impediments the reaction doesn't run and the starting products are recovered. This was observed with N,N-dimethylcysteamine and penicylamine methyl esther ligands. In the special case of orthoaminotiophenol the hydridotiolate was obtained but the ligand was not chelated.
The aminothiolate complexes don't show solution equilibrium. Otherwise, the complexe with 2-(diphenylphosphino)ethanetiol show an isomerisation equilibrium which forms cis isomer as a minor component. The complexe with 2-(diphenylphosphino)-propanetiol shows a conformational equilibrium between chair and twist forms.
The complexes have been tested as catalyst precursors in hydroformylation and hydrosilylation reactions.
The hydroformylation reaction runs only in presence of SnCl2 as cocatalyst. Catalytic activity depends on the presence of triphenylphosphine and, with less magnitude, CO and H2 pressure. We also studied the enantioselectivity using a chiral complexe.
In the hydrosililation reaction, catalysts run with good results (<90%) using triethylsilane as silicon hydride. Dehydrogenative addition product has been also found in this reaction.

Style APA, Harvard, Vancouver, ISO itp.

Blümlein, Katharina. "Arsenite phytochelatin complexes in plants : an analytical challenge /". Available from the University of Aberdeen Library and Historic Collections Digital Resources, 2008. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?application=DIGITOOL-3&owner=resourcediscovery&custom_att_2=simple_viewer&pid=25169.

Pełny tekst źródła

Streszczenie:

Thesis (Ph.D.)--Aberdeen University, 2008.
Title from web page (viewed on Apr. 14, 2009). With: Stability of arsenic peptides in plant extracts: off-line versus on-line parallel elemental and molecular mass spectrometric detection for liquid chromatographic separation / Katharina Bluemlein, Andrea Raab, Jörg Feldman. Anal Bioanal Chem. With: Advantages and limitations of a desolvation system coupled online to HPLC-ICPqMS/ES-MS for the quantative determination of sulphur and arsenic in arseno-peptide complexes / Katharina Bluemlein, Eva M. Krupp and Jörge Feldman. Journal of analytical atomic spectrometry, 2009: 24, 108-113. With: Can we trust mass spectrimetry for determination of arsenic peptides in plants: comparison of LC-ICP-MS and LC-ES-MS/ICP-MS waith XANES/EXAFS in analysis of Thunberfia alata / Katharine Bleumlein .. et al. Includes bibliographical references.

Style APA, Harvard, Vancouver, ISO itp.

Phillip, Denise Mary. "Xanthophylls in light-harvesting complexes of higher plants". Thesis, Liverpool John Moores University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242313.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Blümlein, Katharina. "Arsenite phytochelatin complexes in plants : an analytical challenge". Thesis, University of Aberdeen, 2008. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=25169.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rizkallah, Hind Dunya. "The characterisation of nascent pectin complexes in pea plants". Thesis, University of Glasgow, 2005. http://theses.gla.ac.uk/7092/.

Pełny tekst źródła

Streszczenie:

The structure and properties of a nascent pectin-xyloglucan complex in etiolated pea epicotyls were investigated. Membrane pellets were prepared and incubated with UDP-[14C] galactose, and were extracted with six different reagents: Tris-HC1 buffer (pH 7.4); 50mM EDTA/50mM PO4 (pH6.8) at 100°C; 50mM EDTA/59mM PO4 (pH6.8) at 25°C; phospholipase C with 100 ml of 0.1M Tris-HC1 pH7.4 at 25°C; trypsin at 25°C and 0.1% Triton X-100 at 25°C. The best extractant used to solubilise the pectin-complex from the pellets was 50nM EDTA/50mM PO4 pH 6.8 at 100°C. Aqueous solutions of pectic polyuronides tend to associate covalently into multichain aggregates. Because of the tendency of pectins to aggregate in solution, the effect of a number of eluents on the behaviour of the complex on gel filtration was studied. 10mM EDTA/10nM PO4/1M NaC1 (pH6.8) was chosen as the best eluent to minimise this aggregate formation. On gel filtration using Sepharose CL-2B with this eluent, the complex eluted with a Kav of around 0.8, corresponding to a molecular size approximately 200 kDa, as judged by dextran standards. In other solvents tested, aggregation appeared to occur. On Sepharose CL-4B and CL-6B columns using the same EDTA/Pi/NaC1 solvent, the apparent molecular size was significantly reduced by a xyloglucan-specific endoglucanase, confirming the presence of a xyloglucan rather that a glucan in the complex. Polygalacturonase caused a greater decrease in apparent molecular size, to 10-20 kDa while endo-1 4-b-galactanase converted the radioactivity to [14C] galactobiose and [14C] galactose. When the [14C] galactose-labelled complex was incubated in solution with 3MM paper, the radioactivity was almost completely absorbed onto the paper over a period of about 6 hours. This confirmed the presence of xyloglucan attached to pectin. A new model for the structure of the nascent pectin-xyloglucan complex is proposed.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Plats complets"

Palla, Monica. Plats principaux. Paris: De Vecchi, 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Palla, Monica. Plats uniques. Paris: De Vecchi, 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sélection du Reader's Digest (Canada), red. Plats complets santé. Montréal: Sélection Reader's Digest, 2008.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hornby, Jane. Plats complets & pas compliqués. Paris: Larousse, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Plats uniques. Paris: Hachette cuisine, 2012.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Les plats uniques. [Paris]: Solar, 2009.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rien qu'1 plat!: Plus de 300 recettes conviviales. Paris: Sélection du Reader's Digest, 2007.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Brissaud, Sophie. Tout couscous: 30 recettes du monde : plats complets, sains et festifs ! Gene ve: Minerva, 2009.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Martin, Brigdale, red. Les secrets du rôtissage: Viandes, poissons, légumes, sauces et plus encore. Montréal: Modus Vivendi, 2009.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Robin, Robertson. Cuisine végétarienne à la mijoteuse: 200 recettes pour des repas complets, sains et nourrissants qui sont prêts quand vous l'êtes. Varennes, Québec: AdA, 2006.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Plats complets"

Brereton, Geoffrey. "Complete List of Moliére's Plays". W French Comic Drama from The Sixteenth to The Eighteenth Century, 275–76. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003279945-14.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chuat, Laurent, Markus Legner, David Basin, David Hausheer, Samuel Hitz, Peter Müller i Adrian Perrig. "Current Status and Plans". W The Complete Guide to SCION, 563–72. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05288-0_24.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Awrejcewicz, Jan, i Vadim Anatolevich Krysko. "Static Instability of Rectangular Plates". W Understanding Complex Systems, 41–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-77676-5_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Floss, Doreen M., i Udo Conrad. "Expression of Complete Antibodies in Transgenic Plants". W Antibody Engineering, 489–502. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-01144-3_31.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Schmid, Ute. "3. Constructing Complete Sets of Optimal Plans". W Inductive Synthesis of Functional Programs, 55–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-44846-4_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Faure, Philippe, i Annick Lesne. "Estimating Kolmogorov Entropy from Recurrence Plots". W Understanding Complex Systems, 45–63. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07155-8_2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Prasad, M. N. V. "Metallothioneins and Metal Binding Complexes in Plants". W Heavy Metal Stress in Plants, 51–72. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-662-07745-0_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sorenson, Reed, i Julia Bailey-Serres. "Rapid Immunopurification of Ribonucleoprotein Complexes of Plants". W Methods in Molecular Biology, 209–19. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4939-2444-8_10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"LIST OF COLOR PLATES AND FOLDED PLANS". W Midea: The Megaron Complex and Shrine Area, xiii—xiv. INSTAP Academic Press, 2007. http://dx.doi.org/10.2307/j.ctt5vj956.27.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Orme, Antony R. "The Tectonic Framework of South America". W The Physical Geography of South America. Oxford University Press, 2007. http://dx.doi.org/10.1093/oso/9780195313413.003.0008.

Pełny tekst źródła

Streszczenie:

Tectonism is the science of Earth movements and the rocks and structures involved therein. These movements build the structural framework that supports the stage on which surface processes, plants, animals and, most recently, people pursue their various roles under an atmospheric canopy. An appreciation of this tectonic framework is thus a desirable starting point for understanding the physical geography of South America, from its roots in the distant past through the many and varied changes that have shaped the landscapes visible today. Tectonic science recognizes that Earth’s lithosphere comprises rocks of varying density that mobilize as relatively rigid plates, some continental in origin, some oceanic, and some, like the South American plate, amalgams of both continental and oceanic rocks. These plates shift in response to deep-seated forces, such as convection in the upper mantle, and crustal forces involving push and pull mechanics between plates. Crustal motions, augmented by magmatism, erosion, and deposition, in turn generate complex three-dimensional patterns. Although plate architecture has changed over geologic time, Earth’s lithosphere is presently organized into seven major plates, including the South American plate, and numerous smaller plates and slivers. The crustal mobility implicit in plate tectonics often focuses more attention on plate margins than on plate interiors. In this respect, it is usual to distinguish between passive margins, where plates are rifting and diverging, and active margins, where plates are either converging or shearing laterally alongside one another. At passive or divergent margins, such as the present eastern margin of the South American plate, severe crustal deformation is rare but crustal flexuring (epeirogeny), faulting, and volcanism occur as plates shift away from spreading centers, such as the Mid-Atlantic Ridge, where new crust is forming. Despite this lack of severe postrift deformation, however, passive margins commonly involve the separation of highly deformed rocks and structures that were involved in the earlier assembly of continental plates, as shown by similar structural legacies in the facing continental margins of eastern South America and western Africa. At active convergent margins, mountain building (orogeny) commonly results from subduction of oceanic plates, collision of continental plates, or accretion of displaced terranes.

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Plats complets"

Dequiedt, J., i C. Denoual. "Localisation of plastic deformation in stretching plates: microstructure effects". W 16th edition of the International Conference on Computational Plasticity. CIMNE, 2021. http://dx.doi.org/10.23967/complas.2021.043.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Höök, Kristina, Jussi Karlgren i Annika Wærn. "Inferring complex plans". W the 1st international conference. New York, New York, USA: ACM Press, 1993. http://dx.doi.org/10.1145/169891.170001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ventura, Gabriel, i Fernando Aboites. "A Six-Sigma Approach for Investment Plans in Process Plants". W ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80422.

Pełny tekst źródła

Streszczenie:

It is possible to demonstrate that QFD (Quality Function Deployment) within a norm space permits to realize gap analysis and investment plans for a complex process plant, using its process capability (defects per million of opportunities: DPMO) in the last Quality house. The first step is to partition in six “master nodes” the plant: man power, materials, maintenance, machinery, environment and methods. It is important to realize the layout of the plant, to know the customer’s CTQ (Critical to Quality); according with the CTQ the “customer’s How” will be obtained using the six sigma methodology, the layout and process information. For the last quality house the weak form will be changed by the capability metric. The domain is obtained through Taguchi functions (rigorously: a norm space). For the use of the same metric: DPMO, it is possible to compare man power, materials, maintenance, machinery, environment and methods. In these terms get a benchmarking, Pareto’s diagrams, investment plans are feasible. This method was implemented by CIATEQ A. C. in the Mexican Petrochemical plants and some results are included; CIATEQ A. C. (Advanced Technology Center) is a research center in Me´xico and is part of the Technological centers in this country.

Style APA, Harvard, Vancouver, ISO itp.

Savinkov, M. "SATURATION RESEARCH MAKSIMALNY BY WOOD-SHAVING PLATES OF PREMISES". W Modern machines, equipment and IT solutions for industrial complex: theory and practice. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2021. http://dx.doi.org/10.34220/mmeitsic2021_312-317.

Pełny tekst źródła

Streszczenie:

The wood-shaving plates (DSTP) released by the domestic industry with use of carboamidoformaldehyde pitches (KFS) have very essential shortcoming connected with their toxicity because of considerable allocation from them gas, harmful to the person, - formaldehyde. In recent years formaldehyde is recognized as substance, cancerogenic for the person. It concerns different type of plates: from needle (DSTP) and large-size shaving (OSB), fiber boards (DVP), including medium-density DP-SP (or MDF). The Russian Ministry of Health has established very strict requirements on release of formaldehyde in air both in premises, and in free air the admissible level of which (DU and maximum-permissible concentration – maximum concentration limit) makes only 0,01 mg/m3 of air when testing materials by chamber method. The plate materials released now can exceed DU of 17 times stated above. Despite attempts of institute Vniidrev through appeals to relevant authorities of the Ministry of Health to increase such admissible level in our country, generally for plate materials, were not crowned with success yet and this level in real time remains in force. It is possible to use such plates in premises only at very small saturation room void volume plates (the saturation is defined as the relation of surface area of plates indoors to room void volume). In foreign practice of DU of formaldehyde in air much higher and makes 0,124 mg/m3 of air. Results of researches of the maximum saturation (the relation of surface area of plates to room volume) depending on class of emission of DSTP and DU formaldehyde at values 0,01 and 0,124 of mg/m3 of air in relation to premises are given in the real work.

Style APA, Harvard, Vancouver, ISO itp.

Khedmati, Mohammad Reza, i Mehran Rastani. "Nonlinear Elastoplastic Behaviour of Intermittently Welded Stiffened Plates Under Inplane Compression". W 25th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2006. http://dx.doi.org/10.1115/omae2006-92603.

Pełny tekst źródła

Streszczenie:

The objective of this study is to investigate the sensitivity of the ultimate strength and failure mechanism of stiffened plates constructed by different welding methods in common. A series of detailed numerical analyses of longitudinally stiffened steel plates subjected to inplane compressive load are performed using ADINA commercial finite element code. Complete equilibrium paths are traced up to collapse for nonlinear elastoplastic response of stiffened plates. Stiffened plates analysed are imperfect and their aspect ratio, plate slenderness and column slenderness are changed in a systematic manner. Different types of stiffener are chosen for stiffened plate models. Three different stiffener-to-plate welding procedures are considered: continuous, chain intermittent and staggered intermittent fillet welding.

Style APA, Harvard, Vancouver, ISO itp.

Razinkov, Egor. "THE ANALYSIS OF ADMISSIBLE LEVEL OF FORMALDEHYDE IN AIR". W Modern machines, equipment and IT solutions for industrial complex: theory and practice. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2021. http://dx.doi.org/10.34220/mmeitsic2021_299-303.

Pełny tekst źródła

Streszczenie:

By production of glued and plate wood-base materials with use of carboamidoformaldehyde pitches (KFS) the main lack of technology of which is toxicity of these materials to the person. Toxicity is caused by allocation from these materials of gas, harmful to the person, - formaldehyde which is cancerogenic substance. Wood-shaving plates from needle (DSTP) and large-size shaving (OSB), fiber boards (DVP) including the Intermediate-density fiberboard (MDF), and also plywood of general purpose and different types of special plywood (decorative, bakelized, etc.), first of all, belong to such materials. The Russian Ministry of Health has established very strict requirements on release of formaldehyde in air both in premises, and in free air the admissible level of which makes (DU) only 0,01 mg/m3 of air when testing materials by chamber method. The plate materials released now can exceed DU of 17 times stated above. Especially it concerns DSTP. Despite attempts of institute Vniidrev through appeals to relevant authorities of the Ministry of Health to increase such admissible level in our country, generally for plate materials, were not crowned with success yet and this level in real time remains in force. It is possible to use such plates in premises only at very small saturation them room void volume (the saturation is defined as the relation of surface area of plates indoors to room void volume). So, by our researches for example it is proved that the written dvukhtumbovy table made of DSTP of class of release of formaldehyde E2 can be established in living room of 20 sq.m only one and no more. Only in this case, at small saturation room void volume plates, the release of formaldehyde in air of the room will meet requirements of domestic DU. In premises the case furniture is in reality with much bigger saturation that leads to room gas contamination formaldehyde. In too time abroad formaldehyde size DU in air much more also makes 0,124 mg/m3 of air. In this regard the purpose of our work consisted in the analysis of DU of formaldehyde in air of foreign researches.

Style APA, Harvard, Vancouver, ISO itp.

Razinkov, Egor, i Tatyana Ishchenko. "DYNAMICS OF CHANGE OF REQUIREMENTS OF STANDARDS TO DURABILITY OF WOOD-SHAVING PLATES: REASONS AND CONSEQUENCE". W Modern machines, equipment and IT solutions for industrial complex: theory and practice. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2021. http://dx.doi.org/10.34220/mmeitsic2021_304-311.

Pełny tekst źródła

Streszczenie:

Drevesno – chip plates are widely used in production of case furniture. The volume of their production constantly grows in Russia. If in 2013 it has been made 7270, then in 2017 – 8370, in 2018 – 9789, in 2019 – 9986 thousand m3 of plates. However, one of the main shortcomings of plates of the plates released by the industry is their low durability. It especially concerns one of the main strength performances of plates – ultimate strength at bend. So, in comparison with requirements of GOST 10632-77 durability of plates at bend of the most widespread thickness (13-20 mm) in accordance with GOST 10632-89 has decreased on 9 and 21, in accordance with GOST 10632-2007 on 21 and 29, and by current GOST 10632-2014 – by 38 and 43% depending on brand of plates. Decrease in durability at stretching perpendicular to plate face less noticeable. One of the main reasons of such decrease, use in technology of plates of low-toxic carboamidoformaldehyde (KFS) pitches the content of free formaldehyde in which generally is makes about 0,15%. It is known, than more free formaldehyde is in pitch of subjects bond quality of wood and wood-base materials, with use of this pitch, above. However such big decrease in durability of plates for furniture makers is big shortcoming. It is necessary to change approaches to designing of furniture from such plates. Manufacturers of plates, using low requirements of the present standard, sometimes manipulate due to decrease in density of plates that results in friability of plates, problem of fastening of plates in furniture designs. The purpose of our work was studying of dynamics of decrease in durability of plates according to requirements of standards, since 1977 till present, establishment of the reasons and possible consequences from such decrease.

Style APA, Harvard, Vancouver, ISO itp.

Oka, Kazuhiko, i Naooki Saito. "Snapshot complete imaging polarimeter using Savart plates". W SPIE Optics + Photonics, redaktorzy Eustace L. Dereniak i Robert E. Sampson. SPIE, 2006. http://dx.doi.org/10.1117/12.683284.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Murakami, Yoshihisa, Toshiro Yamase, Shinsaku Zama, Yoshihiro Hirokawa, Haruki Nishi, Minoru Yamada, Akiko Hirano i Naoya Kasai. "Development of Fragility Curve Considering Aging of Oil Storage Tanks and Its Application to Risk Assessment of Industrial Complexes". W ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25508.

Pełny tekst źródła

Streszczenie:

The industrial oil complexes in Japan have been taking various countermeasures for prevention and reduction of disaster based on the regulations. Nevertheless, we cannot deny the possibility of breakout of severe disaster such as leakage of oil, fire, and explosion due to aging facilities, wrong operations, earthquakes and so on. Therefore, municipalities having industrial complexes are required to develop disaster prevention plans and to devise effective disaster prevention schemes. In order to effectively do that, Japan Fire and Disaster Management Agency has shown the guideline to appropriately implement risk assessment of industrial complexes for both in usual and during an earthquake based on the event tree analysis. Especially during an earthquake, the buckling of shell plate of an oil tank by strong ground motions brings the major disaster, because it is highly possible that the buckling breaks out in the vicinity of the bottom and a total quantity of oil outflows. Yamase (2006) proposed a fragility curve for the buckling of shell plate and applied it to the risk evaluation of oil tanks in Hokkaido District, northern part of Japan. However, the fragility curve was built based on only the design shell thickness data of the oil tanks in Kobe City, and the influence of aging deterioration was not considered. Then, we collected the data such as the shell plate thickness, height, diameter, and elapsed time from construction of several hundred oil tanks, and calculated the corrosion speed of the shell plates to consider the influence of aging deterioration of oil storage tanks, and newly developed a fragility curve from these data. As a result, the improved fragility curve leads to the several percent larger in the buckling outbreak probability for oil tanks built scores of years ago.

Style APA, Harvard, Vancouver, ISO itp.

Kolodziejczyk, Andrzej, Maciej Sypek, Zbigniew Jaroszewicz i Salvador Bara Vinas. "Zones plates with elliptical foci curve". W 15th Int'l Optics in Complex Sys. Garmisch, FRG, redaktorzy F. Lanzl, H. J. Preuss i G. Weigelt. SPIE, 1990. http://dx.doi.org/10.1117/12.34732.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Plats complets"

Brown, Richard M, Jr, i Inder Mohan Saxena. Cellulose synthesizing Complexes in Vascular Plants andProcaryotes. Office of Scientific and Technical Information (OSTI), lipiec 2009. http://dx.doi.org/10.2172/958293.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Convery, Mary, Michael Lindgren, Sergei Nagaitsev i Vladimir Shiltsev. Fermilab Accelerator Complex: Status and Improvement Plans. Office of Scientific and Technical Information (OSTI), grudzień 2018. http://dx.doi.org/10.2172/1556948.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Delmer, Deborah P., i Prem S. Chourey. The Importance of the Enzyme Sucrose Synthase for Cell Wall Synthesis in Plants. United States Department of Agriculture, październik 1994. http://dx.doi.org/10.32747/1994.7568771.bard.

Pełny tekst źródła

Streszczenie:

The goal of this work was to understand the role of the enzyme sucrose synthase (SuSy) in synthesis of cellulose and callose in plants. The work resulting from the this grant leads to a number of conclusions. SuSy clearly plays diverse roles in carbon metabolism. It can associate with the plasma membrane of cells undergoing rapid cellulose deposition, such as cotton fibers, developing maize endosperm, gravistimulated pulvini, and transfer cells of the cotton seed. It is also concentrated at sites of high callose deposition (tapetal cells; cell plates). When SuSy levels are lowered by mutation or by anti-sense technology, cell walls undergo degeneration (maize endosperm) and show reduced levels of cellulose (potato tubers). In sum, our evidence has very much strengthened the concept that SuSy does function in the plasma membrane to channel carbon from sucrose via UDP-glucose to glucan synthase complexes. Soluble SuSy also clearly plays a role in providing carbon for starch synthesis and respiration. Surprisingly, we found that the cotton seed is one unique case where SuSy apparently does not play a role in starch synthesis. Current evidence in sum suggests that no specific SuSy gene encodes the membrane-associated form, although in maize the SS 1 form of SuSy may be most important for cell wall synthesis in the early stages of endosperm development. Work is still in progress to determine what does control membrane localization - and the current evidence we have favors a role for Ca2+, and possibly also protein phosphorylation by differentially regulated protein kinases. Finally, we have discovered for the first time, a major new family of genes that encode the catalytic subunit of the cellulose synthase of plants - a result that has been widely cited and opens many new approaches for the study of this important plant function.

Style APA, Harvard, Vancouver, ISO itp.

Halevy, Abraham H., i Anton M. Kofranek. Introduction of Plants from the Brodiaea Complex as New Cut Flowers. United States Department of Agriculture, listopad 1985. http://dx.doi.org/10.32747/1985.7566577.bard.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chamovitz, Daniel A., i Xing-Wang Deng. Developmental Regulation and Light Signal Transduction in Plants: The Fus5 Subunit of the Cop9 Signalosome. United States Department of Agriculture, wrzesień 2003. http://dx.doi.org/10.32747/2003.7586531.bard.

Pełny tekst źródła

Streszczenie:

Plants adjust their growth and development in a manner optimal for the prevailing light conditions. The molecular mechanisms by which light signals are transduced and integrated with other environmental and developmental signals are an area of intense research. (Batschauer, 1999; Quail, 2002) One paradigm emerging from this work is the interconnectedness of discrete physiological responses at the biochemical level, for instance, between auxin and light signaling (Colon-Carmona et al., 2000; Schwechheimer and Deng, 2001; Tian and Reed, 1999) and between light signaling and plant pathogen interactions (Azevedo et al., 2002; Liu et al., 2002). The COP9 signalosome (CSN) protein complex has a central role in the light control of plant development. Arabidopsis mutants that lack this complex develop photomorphogenically even in the absence of light signals (reviewed in (Karniol and Chamovitz, 2000; Schwechheimer and Deng, 2001). Thus the CSN was hypothesized to be a master repressor of photomorphogenesis in darkness, and light acts to bypass or eliminate this repression. However, the CSN regulates more than just photomorphogenesis as all mutants lacking this complex die near the end of seedling development. Moreover, an essentially identical complex was subsequently discovered in animals and yeast, organisms whose development is not light responsive, exemplifying how plant science can lead the way to exciting discoveries in biomedical model species (Chamovitz and Deng, 1995; Freilich et al., 1999; Maytal-Kivity et al., 2002; Mundt et al., 1999; Seeger et al., 1998; Wei et al., 1998). Our long-term objective is to determine mechanistically how the CSN controls plant development. We previously that this complex contains eight subunits (Karniol et al., 1998; Serino et al., 1999) and that the 27 ilia subunit is encoded by the FUS5/CSN7 locus (Karniol et al., 1999). The CSN7 subunit also has a role extraneous to the COP9 signalosome, and differential kinase activity has been implicated in regulating CSN7 and the COP9 signalosome (Karniol et al., 1999). In the present research, we further analyzed CSN7, both in terms of interacting proteins and in terms of kinases that act on CSN7. Furthermore we completed our analysis of the CSN in Arabidopsis by analyzing the remaining subunits. Outline of Original Objectives and Subsequent Modifications The general goal of the proposed research was to study the CSN7 (FUS5) subunit of the COP9 signalosome. To this end we specifically intended to: 1. Identify the residues of CSN7 that are phosphorylated. 2. Monitor the phosphorylation of CSN7 under different environmental conditions and under different genetic backgrounds. 3. Generate transgenic plants with altered CSN7 phosphorylation sites. 4. Purify CSN7 kinase from cauliflower. 5. Clone the Arabidopsis cDNA encoding CSN7 kinase 6. Isolate and characterize additional CSN7 interacting proteins. 7. Characterize the interaction of CSN7 and the COP9 signalosome with the HY5-COP1 transcriptional complex. Throughout the course of the research, emphasis shifted from studying CSN7 phosphorylation (Goals 1-3), to studying the CSN7 kinase (Goal 4 and 5), an in depth analysis of CSN7 interactions (Goal 6), and the study of additional CSN subunits. Goal 7 was also abandoned as no data was found to support this interaction.

Style APA, Harvard, Vancouver, ISO itp.

RL Campbell i SA Hambric. Application of Frequency Domain Substructure Synthesis Technique for Plates Loaded with Complex Attachments. Office of Scientific and Technical Information (OSTI), luty 2004. http://dx.doi.org/10.2172/836291.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Campbell, R. L., i S. A. Hambric. Application of Frequency Domain Substructure Synthesis Technique for Plates loaded with Complex Attachments. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 2004. http://dx.doi.org/10.21236/ada464888.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Anderson, Gerald L., i Kalman Peleg. Precision Cropping by Remotely Sensed Prorotype Plots and Calibration in the Complex Domain. United States Department of Agriculture, grudzień 2002. http://dx.doi.org/10.32747/2002.7585193.bard.

Pełny tekst źródła

Streszczenie:

This research report describes a methodology whereby multi-spectral and hyperspectral imagery from remote sensing, is used for deriving predicted field maps of selected plant growth attributes which are required for precision cropping. A major task in precision cropping is to establish areas of the field that differ from the rest of the field and share a common characteristic. Yield distribution f maps can be prepared by yield monitors, which are available for some harvester types. Other field attributes of interest in precision cropping, e.g. soil properties, leaf Nitrate, biomass etc. are obtained by manual sampling of the filed in a grid pattern. Maps of various field attributes are then prepared from these samples by the "Inverse Distance" interpolation method or by Kriging. An improved interpolation method was developed which is based on minimizing the overall curvature of the resulting map. Such maps are the ground truth reference, used for training the algorithm that generates the predicted field maps from remote sensing imagery. Both the reference and the predicted maps are stratified into "Prototype Plots", e.g. 15xl5 blocks of 2m pixels whereby the block size is 30x30m. This averaging reduces the datasets to manageable size and significantly improves the typically poor repeatability of remote sensing imaging systems. In the first two years of the project we used the Normalized Difference Vegetation Index (NDVI), for generating predicted yield maps of sugar beets and com. The NDVI was computed from image cubes of three spectral bands, generated by an optically filtered three camera video imaging system. A two dimensional FFT based regression model Y=f(X), was used wherein Y was the reference map and X=NDVI was the predictor. The FFT regression method applies the "Wavelet Based", "Pixel Block" and "Image Rotation" transforms to the reference and remote images, prior to the Fast - Fourier Transform (FFT) Regression method with the "Phase Lock" option. A complex domain based map Yfft is derived by least squares minimization between the amplitude matrices of X and Y, via the 2D FFT. For one time predictions, the phase matrix of Y is combined with the amplitude matrix ofYfft, whereby an improved predicted map Yplock is formed. Usually, the residuals of Y plock versus Y are about half of the values of Yfft versus Y. For long term predictions, the phase matrix of a "field mask" is combined with the amplitude matrices of the reference image Y and the predicted image Yfft. The field mask is a binary image of a pre-selected region of interest in X and Y. The resultant maps Ypref and Ypred aremodified versions of Y and Yfft respectively. The residuals of Ypred versus Ypref are even lower than the residuals of Yplock versus Y. The maps, Ypref and Ypred represent a close consensus of two independent imaging methods which "view" the same target. In the last two years of the project our remote sensing capability was expanded by addition of a CASI II airborne hyperspectral imaging system and an ASD hyperspectral radiometer. Unfortunately, the cross-noice and poor repeatability problem we had in multi-spectral imaging was exasperated in hyperspectral imaging. We have been able to overcome this problem by over-flying each field twice in rapid succession and developing the Repeatability Index (RI). The RI quantifies the repeatability of each spectral band in the hyperspectral image cube. Thereby, it is possible to select the bands of higher repeatability for inclusion in the prediction model while bands of low repeatability are excluded. Further segregation of high and low repeatability bands takes place in the prediction model algorithm, which is based on a combination of a "Genetic Algorithm" and Partial Least Squares", (PLS-GA). In summary, modus operandi was developed, for deriving important plant growth attribute maps (yield, leaf nitrate, biomass and sugar percent in beets), from remote sensing imagery, with sufficient accuracy for precision cropping applications. This achievement is remarkable, given the inherently high cross-noice between the reference and remote imagery as well as the highly non-repeatable nature of remote sensing systems. The above methodologies may be readily adopted by commercial companies, which specialize in proving remotely sensed data to farmers.

Style APA, Harvard, Vancouver, ISO itp.

Chamovitz, Daniel, i Albrecht Von Arnim. Translational regulation and light signal transduction in plants: the link between eIF3 and the COP9 signalosome. United States Department of Agriculture, listopad 2006. http://dx.doi.org/10.32747/2006.7696515.bard.

Pełny tekst źródła

Streszczenie:

The COP9 signalosome (CSN) is an eight-subunit protein complex that is highly conserved among eukaryotes. Genetic analysis of the signalosome in the plant model species Arabidopsis thaliana has shown that the signalosome is a repressor of light dependent seedling development as mutant Arabidopsis seedlings that lack this complex develop in complete darkness as if exposed to light. These mutant plants die following the seedling stage, even when exposed to light, indicating that the COP9 signalosome also has a central role in the regulation of normal photomorphogenic development. The biochemical mode of action of the signalosome and its position in eukaryotic cell signaling pathways is a matter of controversy and ongoing investigation, and recent results place the CSN at the juncture of kinase signaling pathways and ubiquitin-mediated protein degradation. We have shown that one of the many CSN functions may relate to the regulation of translation through the interaction of the CSN with its related complex, eukaryotic initiation factor (eIF3). While we have established a physical connection between eIF3 subunits and CSN subunits, the physiological and developmental significance of this interaction is still unknown. In an effort to understand the biochemical activity of the signalosome, and its role in regulating translation, we originally proposed to dissect the contribution of "h" subunit of eIF3 (eIF3h) along the following specific aims: (i) Isolation and phenotypic characterization of an Arabidopsis loss-of-function allele for eIF3h from insertional mutagenesis libraries; (ii) Creation of designed gain and loss of function alleles for eIF3h on the basis of its nucleocytoplasmic distribution and its yeast-two-hybrid interactions with other eIF3 and signalosome partner proteins; (iii) Determining the contribution of eIF3h and its interaction with the signalosome by expressing specific mutants of eIF3h in the eIF3h- loss-of function background. During the course of the research, these goals were modified to include examining the genetic interaction between csn and eif3h mutations. More importantly, we extended our effort toward the genetic analysis of mutations in the eIF3e subunit, which also interacts with the CSN. Through the course of this research program we have made several critical scientific discoveries, all concerned with the apparent diametrically opposed roles of eIF3h and eIF3e. We showed that: 1) While eIF3e is essential for growth and development, eIF3h is not essential for growth or basal translation; 2) While eIF3e has a negative role in translational regulation, eIF3h is positively required for efficient translation of transcripts with complex 5' UTR sequences; 3) Over-accumulation of eIF3e and loss-of-function of eIF3h both lead to cop phenotypes in dark-grown seedlings. These results were published in one publication (Kim et al., Plant Cell 2004) and in a second manuscript currently in revision for Embo J. Are results have led to a paradigm shift in translation research – eIF3 is now viewed in all systems as a dynamic entity that contains regulatory subuits that affect translational efficiency. In the long-term agronomic outlook, the proposed research has implications that may be far reaching. Many important plant processes, including developmental and physiological responses to light, abiotic stress, photosynthate, and hormones operate in part by modulating protein translation [23, 24, 40, 75]. Translational regulation is slowly coming of age as a mechanism for regulating foreign gene expression in plants, beginning with translational enhancers [84, 85] and more recently, coordinating the expression of multiple transgenes using internal ribosome entry sites. Our contribution to understanding the molecular mode of action of a protein complex as fundamental as eIF3 is likely to lead to advances that will be applicable in the foreseeable future.

Style APA, Harvard, Vancouver, ISO itp.

EBASCO SERVICES INC NEW YORK. Data Presentation Report, Army Spill Sites, South Plants Manufacturing Complex. Version 3.2. Phase I. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1988. http://dx.doi.org/10.21236/ada271246.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!