Zaloguj się

Gotowe bibliografie tematyczne / Posterior Composite

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Posterior Composite”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Posterior Composite”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Posterior Composite"

1

Leinfelder, Karl F. "Posterior composite resins." Journal of the American Dental Association 117, no. 4 (1988): 21E—26E. http://dx.doi.org/10.14219/jada.archive.1988.0039.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Alreshaid, L., W. El-Badrawy, HP Lawrence, MJ Santos, and A. Prakki. "Composite versus Amalgam Restorations Placed in Canadian Dental Schools." Operative Dentistry 46, no. 6 (2021): 621–30. http://dx.doi.org/10.2341/20-212-c.

Pełny tekst źródła

Streszczenie:

SUMMARY Objectives To investigate the latest teaching policies of posterior composite placement versus amalgam and to determine the actual numbers of posterior composites versus amalgam restorations placed in Canadian dental schools, over the years from 2008 to 2018. Methods Emails were sent to Chairs/Heads of Restorative Departments and Clinic Directors of all 10 Canadian dental schools to collect data in the forms of: 1) Questionnaire on current teaching policies of posterior composite and amalgam restorations; 2) data entry form to collect the actual numbers of posterior composite and amalg

Style APA, Harvard, Vancouver, ISO itp.

3

Pancu, Galina, Nicoleta Tofan, Andrei Georgescu, et al. "CLINICAL PERFORMANCE OF RESIN COMPOSITE RESTORATIONS IN POSTERIOR TEETH: A REVIEW." Romanian Journal of Oral Rehabilitation 16, no. 2 (2024): 619–30. https://doi.org/10.62610/rjor.2024.2.16.57.

Pełny tekst źródła

Streszczenie:

Resin composites are the first choice for direct restoration of posterior teeth in the treatment of dental caries. This article reviews factors that influence the clinical performance of composite restorations and the results of clinical trials assessing longevity of posterior resin composite restorations. Materials and method. PubMed, and Web of Science electronic databases were searched for articles investigating the clinical performance of direct resin composite restorations placed in posterior teeth. Results and discussions. Factors with significant influence on longevity of posterior comp

Style APA, Harvard, Vancouver, ISO itp.

4

Cândea, Andreea, Daniela Condor, Alexandra Roman, Cristina Micu, and Andrada Şoancă. "Posterior composites – a challenge for practitioners." Romanian Journal of Stomatology 63, no. 1 (2017): 16–23. http://dx.doi.org/10.37897/rjs.2017.1.3.

Pełny tekst źródła

Streszczenie:

Presently, at least half of posterior direct restorations rely on resin composite materials. The resin composite market is highly competitive between manufacturers providing practitioners with a vast choice from an array of similar product types. The aim of the present article is to provide practitioners an updated view on the resin composites presently available, which could represent the theoretical basis for choosing this material type for different clinical purposes mainly focused on restoring posterior teeth. A significant progress in the composition of resin composites is represented by

Style APA, Harvard, Vancouver, ISO itp.

5

Fishman, Ross, Marcio Guelmann, and Enrique Bimstein. "Children's Selection of Posterior Restorative Materials." Journal of Clinical Pediatric Dentistry 31, no. 1 (2007): 1–4. http://dx.doi.org/10.17796/jcpd.31.1.ng7122836mp04vj5.

Pełny tekst źródła

Streszczenie:

This study evaluated children's preference for posterior restorations. After viewing photographs of amalgam, composite, colored compomer and stainless steel crowns, 100 children 5-12 years-old responded to a satisfaction survey. The influence of age, gender and ethnicity was assessed and statistically analyzed. Composite resins were preferred the most and amalgam the least. Caucasians mostly selected composites while African Americans stainless steel crowns. Early interest in colored compomers was seen in young, males and Caucasians.

Style APA, Harvard, Vancouver, ISO itp.

6

Burke, FJ Trevor, Louis Mackenzie, and Adrian CC Shortall. "A history of posterior composite restorations as viewed through the pages of Dental Update." Dental Update 50, no. 5 (2023): 401–10. http://dx.doi.org/10.12968/denu.2023.50.5.401.

Pełny tekst źródła

Streszczenie:

Patients today are increasingly seeking tooth-coloured restorations for their posterior dentition, and with the anticipated decline in the use of amalgam as a result of the Minamata Agreement, this trend will increase. However, these are relatively recent considerations, given that the first dedicated resin composite material intended for use in posterior teeth appeared in 1986. Although macro-filled resin composite materials were available prior to 1986, they exhibited poor wear resistance. This article reviews the history of so-called ‘posterior composite’ restorations as gleaned from the pa

Style APA, Harvard, Vancouver, ISO itp.

7

Simonsen, Richard J. "Condensable posterior composite resin?" Journal of the American Dental Association 113, no. 4 (1986): 578–80. http://dx.doi.org/10.14219/jada.archive.1986.0230.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

P Mohanan, Remya, K. Chandrababu, Sudheer Kumar R. Prabhu, Krishnamma Shoba, and Peethambaran Sheena. "Comparing teaching of amalgam and direct posterior composite restorations to undergraduates: A cross-sectional study among faculties from the Department of Conservative Dentistry & Endodontics in Kerala, India." International Journal of Oral Care and Research 11, no. 4 (2023): 81–84. http://dx.doi.org/10.4103/injo.injo_22_23.

Pełny tekst źródła

Streszczenie:

Abstract Background: Posterior composites are widely used in dental practice today. But whether the undergraduate dental curriculum equip the students with the knowledge and skills in posterior composite placement is questionable. Further, amalgam seems to be an ideal choice of restoration by a few dental professionals. Thus this study aims to compare the theoretical, pre-clinical, and clinical curricular aspects of amalgam and direct posterior restoration from the perspective of dental teaching faculty. Materials and Methods: This observational cross-sectional study was conducted across all d

Style APA, Harvard, Vancouver, ISO itp.

9

Asadian, Faeze, Zahra Shahidi, and Zohreh Moradi. "Evaluation of Wear Properties of Four Bulk-Fill Composites: Attrition, Erosion, and Abrasion." BioMed Research International 2021 (November 12, 2021): 1–8. http://dx.doi.org/10.1155/2021/8649616.

Pełny tekst źródła

Streszczenie:

Purpose. Wear and increased surface roughness are among the reasons for failure of posterior composite restorations. Considering the widespread use of bulk-fill composites in the posterior region, information about their wear resistance is imperative. The aim of this study was to compare the wear and surface roughness of four bulk-fill composite resins with a conventional composite. Methods. Thirty composite discs ( 4 mm × 10 mm ) were fabricated from EverX Posterior (GC), X-tra fil (Voco), Filtek Bulk-Fill Posterior (3M, USA), SonicFill 2 (Kerr), and Z250 (3M) composites. The baseline weight

Style APA, Harvard, Vancouver, ISO itp.

10

Shafqat, Faiqa, Waqas Mirza, Maham Liaqat, et al. "Techniques Used by Dental Specialists for Extensive Posterior Composite Restorations." Pakistan Journal of Medical and Health Sciences 17, no. 2 (2023): 472–74. http://dx.doi.org/10.53350/pjmhs2023172472.

Pełny tekst źródła

Streszczenie:

Objective: To assess the techniques used by dental specialists for placement of extensive posterior composite restorations. Methodology: A cross sectional descriptive was conducted in 150 dentists of College of Dentistry, SMDC, Lahore from June 2019 to July 2020 after obtaining ethical approval from Sharif Medical Research Centre (SMRC). Data was collected using a pre validated questionnaire Results: A statistically non-significant association between the specialty of the dentist the technique used for placement of the composite during restoration (p=0.08). The most commonly used techniques fo

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Posterior Composite"

1

D'Souza, Neena L. "Characterization of novel proprietary posterior composite materials." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0016/MQ53410.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Omer, Osama Elamin. "The edge strength of posterior composite restoratives." Thesis, University of Manchester, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.573487.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Lidums, Arnis. "The posterior resin composite and glass ionomer "sandwich" restoration /." Title page, contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09DM/09dml715.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

張碧珠 and Big-chu Gloria Cheung. "An in vitro study of selected mechanical properties and surface profiles of some ��posterior' composite resin restorative materials." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B38628259.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Luo, Yan, and 羅琰. "Assessment of a glass polyalkenoate cement and a polyacid-modified resin composite for the restoration of posterior teeth." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31242121.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Luo, Yan. "Assessment of a glass polyalkenoate cement and a polyacid-modified resin composite for the restoration of posterior teeth." Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B22242879.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Banomyong, Danuchit. "Effects of glass-ionomer cement lining on sealing ability and postoperative tooth sensitivity after resin composite restoration of posterior teeth /." Connect to thesis, 2009. http://repository.unimelb.edu.au/10187/3533.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Baldissera, Rudimar Antônio. "Avaliação clínica de restaurações de resina composta em dentes anteriores e posteriores." Universidade Federal de Pelotas, 2012. http://repositorio.ufpel.edu.br/handle/ri/2220.

Pełny tekst źródła

Streszczenie:

Made available in DSpace on 2014-08-20T14:30:05Z (GMT). No. of bitstreams: 1 tese Rudimar_Antonio_Baldissera.pdf: 912046 bytes, checksum: 2e67255564e6053c35182672be9085fd (MD5) Previous issue date: 2012-09-14<br>Composite restorations are daily performed in dental offices; however, few studies have reported the longevity of these restorations for long periods of observation. This study was conducted to evaluate the clinical performance of resin composite restorations placed in anterior and posterior teeth in the period between the years 1991 and 2001. From the files of a private dental cli

Style APA, Harvard, Vancouver, ISO itp.

9

Farolfi, Francesco. "Progetto di una sospensione posteriore tipo Rear Trail arm." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Znajdź pełny tekst źródła

Streszczenie:

Progetto e dimensionamento di massima di una sospensione di tipo Trailing Arm per un veicolo solare. Le peculiarità di questa sospensione sono il largo uso di materiali compositi e l'adozione di elementi flessibili in fibra di carbonio al posto delle cerniere.

Style APA, Harvard, Vancouver, ISO itp.

10

Verissimo, Carla. "Obtenção de matrizes inorganicas macroporosas via cristais coloidais e sua posterior aplicação na preparação de compositos." [s.n.], 2003. http://repositorio.unicamp.br/jspui/handle/REPOSIP/249010.

Pełny tekst źródła

Streszczenie:

Orientador : Oswaldo Luiz Alves<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica<br>Made available in DSpace on 2018-08-03T23:41:59Z (GMT). No. of bitstreams: 1 Verissimo_Carla_M.pdf: 10836268 bytes, checksum: 8260cb2155daffa55b9e003fc275f048 (MD5) Previous issue date: 2003<br>Mestrado

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Posterior Composite"

1

D'Souza, Neena L. Characterization of novel proprietary posterior composite materials. Faculty of Dentistry, University of Toronto], 2000.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

E, Goldstein Ronald, ed. Porcelain & composite inlays & onlays: Esthetic posterior restorations. Quintessence Pub. Co., 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Lundin, Sven-Åke. Studies on posterior composite resins with special reference to class II restorations. University of Göteborg, 1990.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Federation, International Dental, ed. Status report on the restoration of posterior teeth with composite resin materials. Fédération Dentaire Internationale, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Barclay, C. W. An in vitro study of three body abrasion in relation to three types of posterior composite. University of Birmingham, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Powers, Laurence James. A study of posterior composite resin dental restorative materials with special reference to the sorption of water and plane strain fracture toughness. Faculty of Dentistry, University of Toronto, 1988.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Woodward, G. L. The use of amalgam composite resin, and glass ionomer for posterior restorations, and the criteria for replacing restorations in the North York public dental program. Community Dental Health Services Research Unit : a joint project of the Faculty of Dentistry, University of Toronto and the Dental Division, North York Public Health Dept., 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Posterior Composite Resin Dental. Peter Szulc Publishing Co., 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Hendriks, Francisca Helena Johanna. Posterior composite restorations: An experimental clinical study. 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Successful Posterior Composites. Quintessence Pub Co, 2008.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Posterior Composite"

1

Torres, Carlos Rocha Gomes, Marcelo Balsamo, and Satoshi Imazato. "Composite Restoration on Posterior Teeth." In Modern Operative Dentistry. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31772-0_15.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Chan, Chan Wai, Ling Qin, K. M. Lee, et al. "Bio-Engineered Mesenchymal Stem Cell-Tricalcium Phosphate Ceramics Composite Augmented Bone Regeneration in Posterior Spinal Fusion." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.1201.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Yeung, H. Y., J. Z. Liu, Ling Qin, et al. "A Potent Osteogenic Composite of Stem Cells – Tricalcium Phosphate Ceramic Enhanced the Posterior Spinal Fusion." In Advanced Biomaterials VI. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-967-9.39.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Rees, J. S., K. R. Williams, and P. H. Jacobsen. "A Review of the Finite Element Method used to Model the Restoration of Posterior Teeth with Composite Resin." In Proceedings of the First International Conference on Interfaces in Medicine and Mechanics. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-011-7477-0_31.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Sabbagh, Joseph, Robert McConnell, and Alessandro Vichi. "Guidelines for Achieving Aesthetic Posterior Restorations Using BFCs." In Bulk Fill Resin Composites in Dentistry. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-16388-3_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Wollmann, J., D. R. Haider, M. Krahl, A. Langkamp, and M. Gude. "Linked a Priori and a Posteriori Models of Composite Manufacturing Process Chain." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-04975-1_95.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Williams, D. F. "Biomaterial and Biomechanical Considerations in the Development of Composites for the Restoration of Posterior Teeth." In Biomechanics: Current Interdisciplinary Research. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-011-7432-9_9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Mitchell, David A., Laura Mitchell, and Lorna McCaul. "Restorative dentistry 2: repairing teeth." In Oxford Handbook of Clinical Dentistry. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199679850.003.0006.

Pełny tekst źródła

Streszczenie:

Contents. Repair and replacement of teeth. Management planning. Dental pain. Occlusion—1. Occlusion—2. Teamworking. Isolation and moisture control. Principles of operative procedures. Posterior composite restorations. Indirect resin composite or porcelain inlays/onlays. Posterior amalgam restorations. Anterior proximal (Class III), incisal (Class IV), cervical (Class V), and root surface caries. Management of extensive/deep restorations. Survival and failure of restorations. Tooth wear/tooth surface loss. ‘Cosmetic’ dentistry. Tooth whitening. Veneers. Anterior crowns for vital teeth. Anterior

Style APA, Harvard, Vancouver, ISO itp.

9

Hamama, Hamdi Hosni. "Recent advances in posterior resin composite restorations." In Applications of Nanocomposite Materials in Dentistry. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-12-813742-0.00019-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

"Surgical Techniques with Posterior Cartilage–Perichondrium Composite Island Graft." In Cartilage Tympanoplasty, edited by Mirko Tos. Georg Thieme Verlag, 2009. http://dx.doi.org/10.1055/b-0034-65436.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Posterior Composite"

1

Mota, Cláudia C. B. O., Bruna A. Guerra, Brena S. A. Machado, Adolfo J. Cabral, and Anderson S. L. Gomes. "Optical coherence tomography applied to the evaluation of wear of composite resin for posterior teeth." In SPIE Biophotonics South America, edited by Cristina Kurachi, Katarina Svanberg, Bruce J. Tromberg, and Vanderlei S. Bagnato. SPIE, 2015. http://dx.doi.org/10.1117/12.2180753.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Abdel Hamid, Dalia, Amal Esawi, Inas Sami, and Randa Elsalawy. "Characterization of Nano- and Micro-Filled Resin Composites Used as Dental Restorative Materials." In ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47053.

Pełny tekst źródła

Streszczenie:

Adhesively-bonded resin composites have the advantage of conserving sound tooth structure with the potential for tooth reinforcement, while at the same time providing an aesthetically acceptable restoration. However, no composite material has been able to meet both the functional needs of posterior restorations and the superior aesthetics required for anterior restoration. In an attempt to develop a dental resin composite that had the mechanical strength of hybrid composite materials and the superior polish and gloss retention associated with microfilled materials, nanofilled resin composites

Style APA, Harvard, Vancouver, ISO itp.

3

Domb, Moshe M., and Jorn S. Hansen. "Stacking Sequence Effects on the Process-Induced Free-Edge Stresses in Thermoplastic Composite Laminates." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0712.

Pełny tekst źródła

Streszczenie:

Abstract A numerical model is developed for prediction of the process-induced thermal residual stresses in thermoplastic composite laminates. The model addresses the development of the residual stress state in fracture-critical free-edge regions as well as through-thickness stress variations. The current approach provides a unique capability for the investigation of the influence of thermal processing and structural parameters on the resulting buildup of residual stresses during manufacturing. Therefore, it can assist in the design and analysis of thermoplastic composites to tailor mechanical

Style APA, Harvard, Vancouver, ISO itp.

4

Vianna, Flavio L. V., Helcio R. B. Orlande, and George S. Dulikravich. "Temperature Field Prediction of a Multilayered Composite Pipeline Based on the Particle Filter Method." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22462.

Pełny tekst źródła

Streszczenie:

Thermal management of subsea oil production systems in deep water environments is one of the main issues for petroleum exploitation operations. Thermal monitoring is crucial to avoid and control the formation of solid deposits, which in adverse operating conditions can result in blockages inside the production systems and consequently incur large financial losses. This paper aims to demonstrate the robustness of a Bayesian approach for accurate estimation of the produced fluid temperature field in a typical multilayered composite pipeline. The physical problem consists of a pipeline represente

Style APA, Harvard, Vancouver, ISO itp.

5

Tang, Xu, and Yong Chen. "Bayesian Inference for the Calibration of Progressive Damage Model of Dovetail Specimens From Laminated Composite Fan Blade." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-121684.

Pełny tekst źródła

Streszczenie:

Abstract Composite fan blades are the preferred alternative for the fan stage of most advanced high bypass ratio turbofan engines in the world. Under service operating conditions, the dovetail part bears a significant centrifugal load, and the ability of the dovetail to safely bear this load is one of the key points of the multi-level “test pyramid” approach of compliance demonstration for special airworthiness regulation. Debonding between adjacent layers is the main damage mode of laminated composite fan blades, and the Cohesive Zone Material model (CZM) is widely applied to characterize its

Style APA, Harvard, Vancouver, ISO itp.

6

Salguero, Jorge, Moises Batista Ponce, Severo R. Fernandez-Vidal, Pedro Mayuet, Edwing I. Rosales, and Mariano Marcos. "Cutting Speed and Feedrate Based Analysis of Cutting Forces in the One Shot Drilling (OSD) of CFRC/Al Hybrid Stacks." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38027.

Pełny tekst źródła

Streszczenie:

Hybrid stacks structures Composite/Metallic Alloy are commonly applied for manufacturing of structural components in different industrial sectors. Particularly, they are increasingly widely used in the aerospace industry because of these materials combine light weight with a high mechanical resistance. This fact helps to increase the load without needing to increment — even diminishing — the energetic consumption. Carbon Fiber Reinforced Composites (CFRC) and light alloys, such as Aluminium or Titanium based alloys, are usually combined for performing those stacks. CFRC/Alloy stacks based airs

Style APA, Harvard, Vancouver, ISO itp.

7

David, N. V., M. N. Zainal, and M. J. M. Nor. "Determination of the Effects of Air Gap and Hind Support on the Sound Absorption Coefficient of Biobased and Foam Materials." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86539.

Pełny tekst źródła

Streszczenie:

The sound absorption characteristics of wooden and porous materials including fibrous media and porous foams vary with the nature of their surface porosity. The low frequency absorption, which is of interest in noise control engineering, of these material types is generally enhanced by introducing an air gap of a certain width or a flexible support at the rear face of the material posterior to the impinging sound waves. This study investigates the effect of air gap with and without hind support on the low frequency absorption of a kenaf/epoxy composite, a Meranti wood, a low-density rigid foam

Style APA, Harvard, Vancouver, ISO itp.

8

Natarajan, Raghu N., Hannah J. Lundberg, Ted Oegema, and Gunnar B. Andersson. "A Novel Multilayered Annular Model to Predict Delamination in a Lumbar Intervertebral Disc." In ASME 2009 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2009. http://dx.doi.org/10.1115/sbc2009-205127.

Pełny tekst źródła

Streszczenie:

Disc degeneration normally is accompanied by structural changes in the intervertebral discs and the end plates. Reduced level of water in the disc, osteophytes formation and geometrical changes in the end plates also accompany the disc degeneration process. Structural changes in the disc due to degeneration can be classified into radial, peripheral and circumferential tears. Radial tears normally extend from inner annulus region to the outer annulus in the radial direction. These may be due to the failure of annular fibers. Peripheral tears in the annulus normally occur near the junction betwe

Style APA, Harvard, Vancouver, ISO itp.

9

Namazi, Hamidreza. "Genetic Algorithm Based Optimization of Cutting Parameters in Drilling of Composite Materials." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-37804.

Pełny tekst źródła

Streszczenie:

Composite materials provide distinctive advantages in manufacture of advanced products because of attractive features such as high strength and light weight, but on the other hand machining of composite materials is difficult to carry out due to the anisotropic and non-homogeneous structure of composites and to the high abrasiveness of their reinforcing constituents. This typically results in damage being introduced into the workpiece and in very rapid wear development in the cutting tool. Conventional machining process such as drilling can be applied to composite materials, provided proper to

Style APA, Harvard, Vancouver, ISO itp.

10

Waskitho, Arief. "An overview of fiber reinforced composites as material for the treatment of posterior missing teeth." In THE 1ST NEW DENTAL RESEARCH EXHIBITION AND MEETING (NEW DREAM) 2023. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0216035.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Posterior Composite"

1

MALDONADO, KARELYS, JUAN ESPINOZA, DANIELA ASTUDILLO, and WILSON BRAVO. Fatigue and fracture resistance and survival of occlusal veneers of composite resin and ceramics blocks in posterior teeth with occlusal wear: A protocol for a systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2021. http://dx.doi.org/10.37766/inplasy2021.10.0036.

Pełny tekst źródła

Streszczenie:

Review question / Objective: The aim of this systematic review is to synthesize the scientific evidence that evaluates fatigue and fracture resistance, survival, and stress distribution, of composite resin CAD/CAM and ceramic CAD/CAM occlusal veneers in posterior teeth with severe occlusal wear. Condition being studied: Currently there is an increase in cases of dental wear, due to several factors such as: excessive consumption of carbonated drinks, a diet high in acids, gastric diseases, anorexia, bulimia, dental grinding, use of highly abrasive toothpastes, or a combination of these(9) (10)

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!