Gotowe bibliografie tematyczne / Printing organization

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Printing organization”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Printing organization”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Printing organization"

Mr., Azad Singh*. "FUTURE SCOPE OF WOMEN CARRIER IN THE PRINTING INDUSTRY: THE CHALLENGES OF WOMEN IN PRINTING OGANIZATIONS (A SURVEY OF TWENTY FIVE COMPANIES "SMALL, MEDIUM AND LARGE PRINTING ORGANIZATION" IN AREA "NCR DELHI AND HISAR, HR".)." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 648–50. https://doi.org/10.5281/zenodo.829815.

Pełny tekst źródła

Streszczenie:

Women carrier in printing organization today, printing industry is growing with an expositional rate & required skills manpower. In this survey based paper to getting recruit of women 10%small, 30%medium and 60% large scale print industry. Objective of this paper is too filled out manpower skills printing industries are seaking in B.Tech women printing students to bridge the gap between skills and required in printing organization. A survey 25 companies was carried out. the result indicated that, it support all above female and those want to advanced their carrier in printing press and get

Style APA, Harvard, Vancouver, ISO itp.

Kasyanov, V. V., E. V. Khrabrova, and Kn V. Melikyan. "THE ORGANIZATION OF WORK OF THE PRINTING INDUSTRY IN AGAIN FORMED SUBJECT – KRASNODAR TERRITORY." Scientific bulletin of the Southern Institute of Management, no. 3 (October 7, 2018): 102–8. http://dx.doi.org/10.31775/2305-3100-2018-3-102-108.

Pełny tekst źródła

Streszczenie:

In article questions of the organization of work and further development of the printing industry in Krasnodar Territory from 1937 for 1939 are considered. The real work is continuation of the research based on studying of the organization of all kinds of activity (industrial production, agriculture, science, art) in the first years after formation of Krasnodar Territory. On the basis of historical approach and the system analysis the main stages of the organization of work of the printing industry in the territory of Krasnodar Territory have been revealed. The emphasis in article is placed on

Style APA, Harvard, Vancouver, ISO itp.

Karovič, Vincent, Filip Kováč, Vincent Karovič, and Peter Veselý. "Print Management System Model in a Large Organization." Applied Sciences 10, no. 12 (2020): 4193. http://dx.doi.org/10.3390/app10124193.

Pełny tekst źródła

Streszczenie:

This article is focused on the analysis and solution of the issue of a printing system model in a large organization. It provides an overview of the current stat29e of the organization and its current printing system. Based on the information about strengths and weaknesses, the most suitable solution for the given organization was designed and subsequently implemented. The created design meets all the requirements required by the company, while minimizing the threats that the deployment of the new system and the resulting changes may have. The work also describes various ways of dealing direct

Style APA, Harvard, Vancouver, ISO itp.

Raman R, Kasi, and Manikandan N. "Effectiveness of Human Resource Practices among Printing Press Organizations in Sivakasi." International Journal of Scientific Research and Management 9, no. 05 (2021): 2211–25. http://dx.doi.org/10.18535/ijsrm/v9i05.em04.

Pełny tekst źródła

Streszczenie:

The research was entitled as “Effectiveness of Human Resource Practices among Printing Press Organizations in Sivakasi”, reveals the importance of existing human resource practices followed in the organizations. The study analyses the various areas of human resource management in the organization such as recruitment and selection, training and development, performance appraisal, compensation policy and remuneration, motivation and welfare measures, and Industrial relations. The study examines the application of Human resource practices within the areas of the organization. The study confronts

Style APA, Harvard, Vancouver, ISO itp.

S, Karuppasamy, and Govindaraj V. "A Study on Influence of Organisational Climate on Job Satisfaction of Printing Industries in Sivakasi." Shanlax International Journal of Commerce 6, S1 (2018): 87–96. https://doi.org/10.5281/zenodo.1419406.

Pełny tekst źródła

Streszczenie:

Climate of  an  organization  somewhat like the  personality just as every indiduvals has  a personality that  makes him unique and different  from  other  person  in    organization  has  an  organization climate  has  clearly  distingue  from  other    organizations.  Basically the  organizational  climate  reflects  a  person’s  perceptions  of  the organizations to which he belongs it is a set of unique characteristics’

Style APA, Harvard, Vancouver, ISO itp.

Ge, Huaidong, and Shuyang Deng. "La protección digital y herencia de los bloques de madera impresos “Jinling Sutra Printing”." Virtual Archaeology Review 5, no. 10 (2014): 77. http://dx.doi.org/10.4995/var.2014.4221.

Pełny tekst źródła

Streszczenie:

Jinling Sutra Publishing House, a protection site for Chinese woodblock printing, is the inheritance organization for Chinese woodblock engraving and ink printing of the Chinese Buddhism classics. This paper, taking “Jinling Sutra Printing” as study object, introduced its carving and printing skills, and proposed that, by means of digital acquisition and storage technology, this intangible cultural heritage could be fully documented and presented through characters, pictures, audio, video and other information.

Style APA, Harvard, Vancouver, ISO itp.

Matveeva, Anastasia S. "DEVELOPMENT OF A SYSTEM FOR EVALUATING THE EFFECTIVENESS OF FINANCIAL AND ECONOMIC ACTIVITIES FOR A COMMERCIAL ORGANIZATION." EKONOMIKA I UPRAVLENIE: PROBLEMY, RESHENIYA 1/2, no. 154 (2025): 137–44. https://doi.org/10.36871/ek.up.p.r.2025.01.02.015.

Pełny tekst źródła

Streszczenie:

This article examines the importance of commercial organizations for the Russian economy, on the basis of which it is concluded that it is necessary to assess the effectiveness of financial and economic activities of private sector organizations. A model for evaluating the effectiveness of financial and economic activities has been developed directly for organizations in the printing industry, but the evaluation model is practically universal and can be applied to any commercial organization with minimal amendments.

Style APA, Harvard, Vancouver, ISO itp.

Мясникова, L. Myasnikova, Пономарев, Vladimir Ponomarev, Самборская, and L. Samborskaya. "Additive Technology in the Innovative Development of Educational Organization and Implementation of Social Projects Related to Improving the Living Conditions of People with Visual Disability." Socio-Humanitarian Research and Technology 5, no. 2 (2016): 11–16. http://dx.doi.org/10.12737/19840.

Pełny tekst źródła

Streszczenie:

Tasks of the educational organization that additive technologies solve, the main problems encountered in the implementation of 3D-printing technology in the educational process, ways of additive technology’s commercialization and benefits to educational organization provided as a result of it implementation are considered in the article. The results of the analysis of 3D-modeling and 3D-printing technology using in the implementation of social projects related to improving the living conditions of people with visual disabilities are described.

Style APA, Harvard, Vancouver, ISO itp.

Tusya'diyah, Halimah, and Isnaini Rodiyah. "The Role of Youth Organizations in Community Empowerment through Screen Printing Business in Krembung Village, Krembung District, Sidoarjo." JKMP (Jurnal Kebijakan dan Manajemen Publik) 7, no. 2 (2022): 15–20. http://dx.doi.org/10.21070/jkmp.v7i2.1701.

Pełny tekst źródła

Streszczenie:

This study aims to describe and analyze the role of youth organization in community empowerment in Krembung Villange, Krembung District, Sidoarjo Regency. The type of research used is descriptive qualitative research. Data collection techniques are carried out through observation, interviews, and documentations. Determination on informants in this study using purposive sampling technique. Data analysis technique using Miles & Huberman theory namely data collection, data reduction, data presentation and drawing conclusions. The results of this study indicate that the empowerment of villange

Style APA, Harvard, Vancouver, ISO itp.

Ayusheeva, I. Z. "Problems of Legal Regulation of Contractual Relations in the Process of Creating Bio-Print Human Organs." Lex Russica, no. 6 (July 1, 2019): 92–99. http://dx.doi.org/10.17803/1729-5920.2019.151.6.092-099.

Pełny tekst źródła

Streszczenie:

Additive manufacturing, 3D printing and bio-printing are technologies of the Fourth Industrial Revolution. Currently, due to the possibility of hacking the human genome, it is important to define the concept of legal regulation of relations concerning bioprinting and creation of a regulatory framework for their legal regulation, which would determine who should be held responsible for the defect takes place when printing a human organ (a creator of a digital template, a manufacturer of a 3D printer or a person who operates the 3D printer), what obligations arise with regard to the template, wh

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Printing organization"

Farren, Sean Michael. "An evaluation of whether the management practices of four companies (representing the printing industry in Bulawayo, Zimbabwe) have affected their profitability and success in the period 2003-2004." Thesis, Rhodes University, 2005. http://hdl.handle.net/10962/d1007926.

Pełny tekst źródła

Streszczenie:

Nohria, Joyce and Roberson, a trio of academics in the United States, wrote an article in the July issue of the Harvard Business Review in 2003 entitled "What Really Works". For several years they had studied the management practices of 160 companies in the United States with a view to determining what made certain companies consistently successful. They found that the most profitable companies in their study were not successful because they utilised the latest management tools and techniques, but rather that they had a strong grasp of business basics. Companies outperformed their industrial p

Style APA, Harvard, Vancouver, ISO itp.

Giuliani, Marco. "Identità, evoluzione ed organizzazione interna di programmi poetico-musicali nelle raccolte rinascimentali italiane di madrigali e canzonette di diversi autori." Thesis, Toulouse 2, 2014. http://www.theses.fr/2014TOU20118/document.

Pełny tekst źródła

Streszczenie:

La bibliographie sur la polyphonie profane italienne des XVIe et XVIIe siècles, qui décrit aussi le répertoire des éditions de plusieurs auteurs (par rapport à des livres d'un seul compositeur) est restée jusqu'à aujourd'hui la moins connue, la moins cataloguée et la moins mise à jour malgré les efforts des nombreux chercheurs talentueux. Reléguée à une section secondaire du «Vecchio Vogel» (1892) et révisé avec autorité par Alfred Einstein (1962), sa complexité variée a été éludée par la musicologie systématique, avec quelques exceptions rares, mais partielles (Lincoln, Lewis Bernstein.) Le N

Style APA, Harvard, Vancouver, ISO itp.

Haugen, Jenna. "Green Employees: Organizational Identification in an Environmentally Friendly Company." TopSCHOLAR®, 2009. http://digitalcommons.wku.edu/theses/107/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Serrano, Carole. "Impression 3D de dispositifs médicaux utilisés en chirurgie : quelles recommandations pour l’élaboration d’un modèle d’évaluation médico-économique ? Benefits of 3D printing applications in jaw reconstruction : A systematic review and meta-analysis Evaluation of 3D printing costs in surgery : a systematic review." Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPASQ024.

Pełny tekst źródła

Streszczenie:

L’impression 3D est une technologie permettant la fabrication d’un objet par additions successives de couches de matériaux. Cette technologie trouve de nombreuses applications dans le domaine de la santé : bio-impression de tissus et d’organes, fabrication de médicaments ou encore production de dispositifs médicaux sur mesure. Ces quinze dernières années, la production de modèles anatomiques, de guides chirurgicaux et d’implants adaptés à l’anatomie du patient s’est développée de façon exponentielle dans toutes les spécialités chirurgicales. Néanmoins, la question de son évaluation clinique et

Style APA, Harvard, Vancouver, ISO itp.

Tonello, Renato. "Gestão da qualidade em pequenas e médias empresas do setor industrial gráfico: diagnóstico da maturidade organizacional." Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/1861.

Pełny tekst źródła

Streszczenie:

Este estudo apresenta um diagnóstico realizado com Pequenas e Médias Empresas (PMEs) do setor gráfico localizadas no estado do Paraná, o qual teve o objetivo de avaliar o nível de maturidade organizacional destas quanto à implantação de práticas de Gestão da Qualidade (GQ), e seu desenvolvimento obedeceu às seguintes etapas: pesquisa e análise do panorama dos estudos acadêmicos relacionados ao tema, acompanhada de entrevista em uma microempresa do setor (etapa 1); aplicação de um modelo de diagnóstico do nível de maturidade quanto às práticas em GQ na mesma empresa, com a proposição melhorias

Style APA, Harvard, Vancouver, ISO itp.

Parks, Stephen R. "Consuming Digital Debris in the Plasticene." VCU Scholars Compass, 2018. https://scholarscompass.vcu.edu/etd/5438.

Pełny tekst źródła

Streszczenie:

Claims of customization and control by socio-technical industries are altering the role of consumer and producer. These narratives are often misleading attempts to engage consumers with new forms of technology. By addressing capitalist intent, material, and the reproduction limits of 3-D printed objects’, I observe the aspirational promise of becoming a producer of my own belongings through new networks of production. I am interested in gaining a better understanding of the data consumed that perpetuates hyper-consumptive tendencies for new technological apparatuses. My role as a designer focu

Style APA, Harvard, Vancouver, ISO itp.

Jhang, Shu-Huei, and 張淑蕙. "Scientific Chinese native medicine series printing organization designresearch." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/89806584608202509502.

Pełny tekst źródła

Streszczenie:

碩士 國立中央大學 機械工程研究所 96 Loads separately the organization in the market condition Chinese native medicine, the function all only arrives to sublets the part, does not have the means the replenishment sickness name as well as the disease symptom also has the date above the medicine bag, is easy to create the confusion, and can have the hiding danger, for instance said: Drugs expired, perhaps eats does not belong to the oneself disease symptom the drugs, can create the danger to person''s body, also can let the symptom aggravate. Proposed in the present paper set of sur- series printin

Style APA, Harvard, Vancouver, ISO itp.

Chung, Shiou-Gu, and 鍾秀谷. "The relationship of corporate culture and leadership to the organization commitment of the printing industy in Taipei." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/29105223980445993387.

Pełny tekst źródła

Streszczenie:

碩士 中國文化大學 造紙印刷研究所 85 The purpose of this research is to explore the relationship of corporate culture and leadership to the organization commitment of the printing industry in Taipei. The object of research is the people working in the flat-printing industry around Taipei area. The results of study show: 1.The corporate culture to the three factors of organization commitment appe- ar noticeable relative. 2.The leadership to the three factors of organization commitment appe

Style APA, Harvard, Vancouver, ISO itp.

HSIEH, WANG-CHI, and 謝汪機. "Applying the Organizational Process Definition of CMMI to Printing Industry." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/42035388759935553444.

Pełny tekst źródła

Streszczenie:

碩士 亞洲大學 資訊工程學系碩士在職專班 102 Due to the technology innovation, it makes the printing products of modern printing industry variousand diversified, and meanwhile the printing costs are increased. Therefore, in addition to actively increasing their own competitiveness, the printing industry can apply the CMMI to improve the organization processes and enhance the organizational efficiencies, and eventually to facilitate the management of the printing industry. In this research, the case study printing companies use IDEAL model to apply the Organizational Process Definition process area of

Style APA, Harvard, Vancouver, ISO itp.

He, Yu-Yao, and 何鈺瑤. "A Study on the Critical Success Organizational Capability of Printing Industry's Cultural-Creativelization." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/79977440895295517572.

Pełny tekst źródła

Streszczenie:

碩士 南華大學 文化創意事業管理學系 102 In Taiwan, printing industry’s cultural-creativelization is a new industry development trend that needs a new business model to develop new organizational capability.This study aimed to explore the crucial success capability of the operation, to find its hierarchical structures and the weight system for the reference of academic research and practical progress. 　　This study combined two research methods, namely AHP and expert judgment, along with the self-administered questionnaire “A study on crucial success capability of printing turns to cultural and creat

Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Printing organization"

Ruggles, Philip Kent. Printing estimating: Costing and pricing print and digital media. 5th ed. PIA/GATFPress, 2008.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ruggles, Philip Kent. Printing estimating: Costing methods for digital and traditional graphic imaging. 4th ed. Delmar Publishers, 1996.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Administration, United States Congress Senate Committee on Rules and. Authorizing the printing of 2,000 additional copies of the committee print of the Committee on Armed Services (99th Congress, 1st session) entitled "Defense organization: the need for change": Report (to accompany S. Con. Res. 80). U.S. G.P.O., 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

UNCTAD/WTO, International Trade Centre, ed. Contractual agreements in the publishing and printing industry: A practical guide. ITC, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

M, Carley Kathleen, ed. Communication at a distance: The influence of print on sociocutural organization and change. Lawrence Erlbaum Associates, 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Covington, Edward J. Franklin Silas Terry (1862-1926), industrialist: Paragon of organization, harmony, and generosity. E.J. Covington, 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Green, Phil. Color management: Understanding and using ICC profiles. Wiley, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Moginov, Rostislav, Ekaterina Nadirova, and Yaroslav Dmitriev. Basics of flexography. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1064900.

Pełny tekst źródła

Streszczenie:

The textbook deals with the theoretical and practical issues of flexographic printing technology. Much attention is paid to prepress and printing processes. Data on the adhesion of flexographic inks are presented, and theoretical and practical issues affecting the quality of printing are presented. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for teaching students of higher education institutions in the discipline " Flexographic printing technology "in the direction of bachelor's degree 29.03.03 and m

Style APA, Harvard, Vancouver, ISO itp.

Congress, United States Congress Joint Committee on the Organization of. Support agencies: Hearing before the Joint Committee on the Organization of Congress, One Hundred Third Congress, first session ... June 10, 1993. U.S. G.P.O., 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

United States. Congress. Joint Committee on the Organization of Congress. Support agencies: Hearing before the Joint Committee on the Organization of Congress, One Hundred Third Congress, first session ... June 10, 1993. U.S. G.P.O., 1993.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Printing organization"

Rivron, N. C., J. Rouwkema, R. Truckenmüller, and C. A. van Blitterswijk. "What Should We Print? Emerging Principles to Rationally Design Tissues Prone to Self-Organization." In Cell and Organ Printing. Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-9145-1_9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gran, Erik, Javier Alonso Madrid, Guillermo Sotorrío Ortega, José Antonio Tenorio Rios, and Nils O. E. Olsson. "Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability." In SDGs in Construction Economics and Organization. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-25498-7_15.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vukašinović, Josip, Ivan Grgić, Jure Marijić, and Mirko Karakašić. "Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design." In 31st International Conference on Organization and Technology of Maintenance (OTO 2022). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-21429-5_10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fani, Sara, and Margherita Farina. "The Lexicographical and Grammatical Studies by Giovanni Battista Raimondi (Rome ca. 1580–1614)." In Documenter et décrire les langues d’Asie : histoire et épistémologie. Société d’histoire et d’épistémologie des sciences du langage, 2025. https://doi.org/10.4000/138mp.

Pełny tekst źródła

Streszczenie:

The scientific activity of the orientalist Giovanni Battista Raimondi is inextricably connected to the editorial projects of the Roman Typographia Medicea, which he directed from 1584 until his death. The present contribution focuses on unpublished grammars, lexica and other didactic materials of Syriac, Arabic, Persian and Turkish that were either produced or projected by Raimondi between the end of the 16th and the first decade of the 17th cent. A great number of grammatical and lexicographical notes, together with drafts and printing proofs are preserved in Florentine libraries as well as a

Style APA, Harvard, Vancouver, ISO itp.

Dimassi, Saoussen, Frédéric Demoly, Christophe Cruz, and Samuel Gomes. "From Dispersed Knowledge to Ontology: A Proposal for Formalizing and Integrating 4D Printing in Design." In Product Lifecycle Management. Green and Blue Technologies to Support Smart and Sustainable Organizations. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94399-8_7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Häberlein, Mark, and Paula Manstetten. "The Translation Policies of Protestant Reformers in the Early Eighteenth Century. Projects, Aims, and Communication Networks." In Übersetzungspolitiken in der Frühen Neuzeit / Translation Policy and the Politics of Translation in the Early Modern Period. Springer Berlin Heidelberg, 2024. http://dx.doi.org/10.1007/978-3-662-67339-3_13.

Pełny tekst źródła

Streszczenie:

ZusammenfassungThis article examines the aims and motivations underlying the numerous translation projects initiated or supported by two Protestant organizations—the Anglican Society for Promoting Christian Knowledge (SPCK) in London and the Pietist Halle orphanage—in the early eighteenth century. These projects included translations of the Bible, catechisms, and devotional literature into over twenty-five languages, carried out for the benefit of Protestants abroad as well as for missionary activities among non-Protestant Christians and “heathens”. We survey a broad range of these endeavours

Style APA, Harvard, Vancouver, ISO itp.

Olsson, Nils O. E., Ali Shafqat, Emrah Arica, and Andreas Økland. "3D-Printing Technology in Construction: Results from a Survey." In 10th Nordic Conference on Construction Economics and Organization. Emerald Publishing Limited, 2019. http://dx.doi.org/10.1108/s2516-285320190000002044.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Programmable Matter or Smart Matter, Stimulated Organization and 4D Printing." In From Additive Manufacturing to 3D/4D Printing 3. John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119451501.ch1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Leonardi, Paul M. "Technology and Work in the Virtual Organization." In Encyclopedia of Information Science and Technology, First Edition. IGI Global, 2005. http://dx.doi.org/10.4018/978-1-59140-553-5.ch488.

Pełny tekst źródła

Streszczenie:

With the proliferation of industrial manufacturing plants in the United States during the first half of the 20th century, work was traditionally understood not only as something you did to earn a living, but someplace you went. The industrial revolution fundamentally changed the nature of work as it tied the practices of manual laborers to specific technologies such as the assembly line and the printing press, which were located in specific factories, plants, and offices. Today when we talk about work as a place we go rather than a thing we do, our rhetoric is a remnant of an image of manual w

Style APA, Harvard, Vancouver, ISO itp.

Shehzad Adeel, Zahoor Sadaf, Sarfraz Shoaib, and Shehab Essam. "Implementation of TPM in a Process Industry: A Case Study from Pakistan." In Advances in Transdisciplinary Engineering. IOS Press, 2018. https://doi.org/10.3233/978-1-61499-902-7-511.

Pełny tekst źródła

Streszczenie:

Quality of any manufactured product is closely associated with to maintenance of manufacturing systems of any organization. To achieve a world class manufacturing system, two new manufacturing paradigm Total Productive Maintenance (TPM) and Total Quality Management (TQM) have emerged over the period along with other widely used concepts. In this paper, a case study related to implementation of Total Productive Maintenance is shared for a packaging material manufacturing organization. TPM Concept is implemented in the business flexible unit equipped with various flexographic printing machines.

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Printing organization"

Feng, Shuai, Tengteng Tang, JaeWoo Park, et al. "Self-organization via 3D printing of anisotropic plasmonic structures." In Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XXII, edited by Yu-Jung Lu and Takuo Tanaka. SPIE, 2024. http://dx.doi.org/10.1117/12.3028312.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Irawan, Herry, Ratih Hendayani, and Dodie Tricahyono. "Measuring Organizational Performance of Small Medium Enterprise (SME) Printing Industry (Bandung, Jogjakarta, and Bali) using SCOR level 1 Opportunity Gap." In 3rd International Seminar and Conference on Learning Organization. Atlantis Press, 2016. http://dx.doi.org/10.2991/isclo-15.2016.33.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Munger, Roger. "Go Green: Making the Case for Eco-Friendly Printing at Your Organization." In 2007 IEEE International Professional Communication Conference, IPCC 2007. IEEE, 2007. http://dx.doi.org/10.1109/ipcc.2007.4464096.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhovtyi, V. H. "Organization of accounting of settlements with the personnel of production and printing industry enterprises." In Accounting, taxation, analysis and audit: current state, problems and prospects for development. Chernihiv Polytechnic National University, 2020. http://dx.doi.org/10.25140/978-617-7571-98-7-2020-41-42.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Win, Zaw, Geoffrey D. Vrla, Emily N. Sevcik, and Patrick W. Alford. "Microfluidic Device for Spatial Control of Cell Seeding in Engineered Tissues." In ASME 2013 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/sbc2013-14510.

Pełny tekst źródła

Streszczenie:

In vivo tissues have finely controlled hierarchical structure that is often difficult to mimic in vitro. Microfabrication techniques, such as microcontact printing, can be used to reproduce tissue structure in vitro by controlling cell shape and orientation [1]. Several recent results suggest that cellular organization and structure can influence tissue function in engineered tissues [2–4]. For example, using microcontact printing and muscular thin film technology, we recently demonstrated that engineered vascular tissues whose smooth muscle cells possessed more elongated spindle-like geometri

Style APA, Harvard, Vancouver, ISO itp.

Xu, Chengyao, Yancheng Wang, Jiawei Liu, Shuo Han, and Deqing Mei. "Fiber-Reinforced Polymer Composites Fabrication Through Acoustic-Assisted 3D Printing Process." In ASME 2023 18th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/msec2023-106520.

Pełny tekst źródła

Streszczenie:

Abstract Multifunctional composites have been widely utilized in aerospace, biomedical and electronic devices. Fiber-reinforced composites are characterized by lightweight, tough, and with high energy absorption capabilities, they have received considerable attentions. Honeycomb structure is one of the typical lightweight structures of fiber-reinforced composites, it features a two-dimensional polygon array with periodic topological organization in the plane, and brings technical challenges to fabricate fiber-reinforced composites. Herein, we present a novel acoustic-assisted 3D printing metho

Style APA, Harvard, Vancouver, ISO itp.

Devrani, Shitanshu, Sudhanshu Pandey, Shubham Chaturvedi, Krishnakumar Sankar, Shantanu Patil, and K. Sridhar. "Design and Analysis of an Efficient Vaccine Cold Chain Box." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65858.

Pełny tekst źródła

Streszczenie:

Human health is one of the most important concerns for the governments around the world. Global organizations such as WHO (World Health Organization) and PATH (Program for Appropriate Technology in Health) have considerable interest in organizing vaccination programs and its cold chain delivery. The problem predominantly persists in Lower-middle income countries like India where due to inadequate infrastructure and lack of consistent Power supply, significant losses occur in the cold chain. Improvements are required to prevent the loss of costly and precious vaccines during the cold chain. Ind

Style APA, Harvard, Vancouver, ISO itp.

Briguiet, Gabriel, and Paul F. Egan. "Structure, Process, and Material Influences for 3D Printed Lattices Designed With Mixed Unit Cells." In ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22575.

Pełny tekst źródła

Streszczenie:

Abstract Emerging 3D printing technologies are enabling the design and fabrication of novel architected structures with advantageous mechanical responses. Designing complex structures, such as lattices, with a targeted response is challenging because build materials, fabrication process, and topological design have unique influences on the structure’s mechanical response. Changing any factor may have unanticipated consequences, even for simpler lattice structures. Here, we conduct mechanical compression experiments to investigate varied lattice design, fabrication, and material combinations us

Style APA, Harvard, Vancouver, ISO itp.

CHIRUHIN, D. A., and K. V. RYABININ. "ADDITIVE MANUFACTURING TECHNOLOGY FOR PERSONALIZED DRY ELECTRODE HEADSETS FOR BRAIN-COMPUTER INTERFACES." In GRAPHICON 2024. Omsk State Technicl University, 2024. http://dx.doi.org/10.25206/978-5-8149-3873-2-2024-418-427.

Pełny tekst źródła

Streszczenie:

Comfort in wearing and anatomical accuracy of the electrodes head cap play an important role in the organization of brain-computer human-machine interfaces based on electroencephalography. This paper proposes a technological chain and corresponding software tools for a complete cycle of dry electrodes head cap manufacturing for a particular person. The pipeline includes 3D scanning of the head, interactive editing of the electrodes' placement scheme, and automatic generation of a collapsible head cap model optimized for 3D printing. The performance of the pipeline has been validated in practic

Style APA, Harvard, Vancouver, ISO itp.

Tkachev, Vitaliy. "To the Question of Organization of Art Exhibitions in the Cities of the Irkutsk Province of the Beginning of the XX Century: on the Materials of Periodic Printing." In Irkutsk Historical and Economic Yearbook 2021. Baikal State University, 2021. http://dx.doi.org/10.17150/978-5-7253-3040-3.36.

Pełny tekst źródła

Streszczenie:

The article analyzes the sources of periodicals of the early XX century. on the organization of art exhibitions in the cities of the Irkutsk province. Newspapers told readers about unique events, familiarized residents with the paintings of domestic and foreign artists, the artistic life of the region. The study examines the main stages of exhibitions, identifies problems and results of events. The work proved that the sources of periodicals show how the idea of urban residents about the exhibitions taking place, value guidelines in art was formed.

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Printing organization"

Slattery, Kevin T. Unsettled Aspects of the Digital Thread in Additive Manufacturing. SAE International, 2021. http://dx.doi.org/10.4271/epr2021026.

Pełny tekst źródła

Streszczenie:

In the past years, additive manufacturing (AM), also known as “3D printing,” has transitioned from rapid prototyping to making parts with potentially long service lives. Now AM provides the ability to have an almost fully digital chain from part design through manufacture and service. Web searches will reveal many statements that AM can help an organization in its pursuit of a “digital thread.” Equally, it is often stated that a digital thread may bring great benefits in improving designs, processes, materials, operations, and the ability to predict failure in a way that maximizes safety and m

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!