Gotowe bibliografie tematyczne / Process Integrity

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Process Integrity”

Autor: Grafiati
Data publikacji: 12 kwietnia 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Process Integrity”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Process Integrity"

1

Müller, M. "Influence of surface integrity on bonding process". Research in Agricultural Engineering 57, No. 4 (14.12.2011): 153–62. http://dx.doi.org/10.17221/39/2010-rae.

Pełny tekst źródła
Streszczenie:
Adhesive bonding technology is successfully applied partly in the primary production, partly in the renovation in various fields of human activities. This fact emphasizes the importance of the partial factors research, which influence is essential for the quality, reliability and necessarily the usable life of bonded joints. The mechanical preparation of bonded surface is a varied process which influences directly the resultant bonded joint quality. The aim of the bonded surface mechanical preparation is the adhesion improvement in the adhesive – adherend interface. For mechanical preparation we use tools of defined cutting edge, by means of which we get the uniform surface texture, e.g. by milling. On the contrary such methods are more often used when the uniform surface cannot be reached. Shot blasting and grinding are significant representatives of these methods. The manual grinding can be significantly applied mainly in the agriculture. The absence of connected areas availability for the mechanical tooling and impossibility of their work clamping are the reasons for that. The breakwater in the sprinkler cistern restricting the liquid motion is the example.
Style APA, Harvard, Vancouver, ISO itp.
2

Lee, Yang W., Leo Pipino, Diane M. Strong i Richard Y. Wang. "Process-Embedded Data Integrity". Journal of Database Management 15, nr 1 (styczeń 2004): 87–103. http://dx.doi.org/10.4018/jdm.2004010104.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Abelson, P. H. "Integrity of the Research Process". Science 256, nr 5061 (29.05.1992): 1257. http://dx.doi.org/10.1126/science.256.5061.1257.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Goyal, Hemant, David C. Parish i Edwin W. Grimsley. "Examining Integrity in the Match Process". Academic Medicine 95, nr 1 (styczeń 2020): 8. http://dx.doi.org/10.1097/acm.0000000000003022.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Signer, Mona M., i Laurie S. Curtin. "Examining Integrity in the Match Process". Academic Medicine 95, nr 1 (styczeń 2020): 8–9. http://dx.doi.org/10.1097/acm.0000000000003025.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Khurana, Reema, i Vijay V. Mandke. "Business process modeling with information integrity". Business Process Management Journal 15, nr 4 (24.07.2009): 487–503. http://dx.doi.org/10.1108/14637150910975507.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Tunon, Manuel I. Capel, Luis E. Mendoza Morales i Kawtar Benghazi Akhlaki. "Automatic verification of business process integrity". International Journal of Simulation and Process Modelling 4, nr 3/4 (2008): 167. http://dx.doi.org/10.1504/ijspm.2008.023679.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Varis, Juha. "Ensuring the integrity in clinching process". Journal of Materials Processing Technology 174, nr 1-3 (maj 2006): 277–85. http://dx.doi.org/10.1016/j.jmatprotec.2006.02.001.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

DeNileon, Gay Porter. "Certification Ensures System Integrity, Process Control". Opflow 26, nr 3 (marzec 2000): 7–15. http://dx.doi.org/10.1002/j.1551-8701.2000.tb02231.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Co, Tomas B. "Process Integrity: A Framework for Extended and Safe Process Operation". IFAC Proceedings Volumes 31, nr 10 (czerwiec 1998): 401–6. http://dx.doi.org/10.1016/s1474-6670(17)37592-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Process Integrity"

1

Lhee, Kyung-suk. "Integrity checking for process hardening". Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2005. http://wwwlib.umi.com/cr/syr/main.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Petkov, Petko. "Laser milling : surface integrity, removal strategies and process accuracy". Thesis, Cardiff University, 2011. http://orca.cf.ac.uk/13705/.

Pełny tekst źródła
Streszczenie:
Laser milling is capable of processing a large range of materials which are not machinable with conventional manufacturing processes. Engineering materials such as glass, metals and ceramics can be machined without requiring expensive special tools and without any limitations on the 3D complexity of the component. Laser milling is still in its infancy. Laser material interactions are not yet fully understood. Much effort in research and development of the available laser sources is still needed. Ultrafast lasers are beginning to be applied. They can offer more precise machining without the thermal damage that accompanies long-pulse laser manufacturing. Laser pulse duration and its effect on resulting surface integrity has been studied as well as material removal strategy and process accuracy. In order to characterise the resulting surface after laser ablation, the heat affected zone is usually specified. In most cases, visual inspection would be performed without further analysis, resulting in variance of the findings attributed to the operator. A new methodology was required to accurately and impartially assess the heat penetration and quantify the findings. Based on material grain refinement, a comprehensive new methodology was created. By monitoring the changes in grain sizes, a chart of the heat penetration could be created accurately with automated routines. Surface integrity is a critical factor for many applications and a methodology based on analysis of grain refinement in the vicinity of the processed area would create a full map of - iii - the changes happening after laser ablation. Furthermore, the impact of the laser pulse duration is studied utilising the above mentioned development. Further to the surface roughness and heat affected zone, an in-depth analysis was completed on the micro hardness of the material in order to create a comprehensive chart of the changes induced by the laser milling process. Material removal is based on the overlapping of single craters, and the way the craters overlap is referred to as material removal strategy. Generally there are many strategies formulated for material removal but none of them takes into account the specifics of laser milling. Based on surface orientation, dimensions and feature importance, an assessment of material removal strategies is presented. Although ‘laser milling’ is a term used for a number of material removal processes, there are significant differences between them. New strategies for material removal are formulated and reported based on surface topography and orientation. Advanced programming is realised using a commercially available generic CAM package but taking into account the specifics of the laser milling process. The accuracy of the laser milling process depends on the laser-material interaction, and also on the machine hardware, control system and software. Most of the factors affecting accuracy cannot be changed once the machine is built, but there are some that can be optimised to improve process accuracy. The laser source with its characteristics is as important as the material being processed. The relationship between pulse duration, pulse shape and accuracy of the process was demonstrated through a series of experiments designed to expose the correlation between, and impact of, these parameters.
Style APA, Harvard, Vancouver, ISO itp.
3

Horodinca, Antonia. "Territorial Integrity of Turkey and the PKK Peace Process". Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-22824.

Pełny tekst źródła
Streszczenie:
The thesis examines the undergoing peace process in Turkey between the Turkish state and the PKK organisation and seeks to assess how this development is affected by one of the principles of the Turkish national state: territorial integrity. Examining the preservation of territorial integrity as a factor shaping the pacification is crucial to understanding the dynamics of the current peace process and how distant the prospect of achieving a long lasting peace is. I investigate the PKK peace process using the works of scholars developing on conflict resolution and the specificities of Turkish politics and I address the relevance of their theories to the case of the PKK.
Style APA, Harvard, Vancouver, ISO itp.
4

Stapelberg, Rudolph Frederick. "Methodology for Determining the Integrity of Process Engineering Design". Thesis, Griffith University, 2004. http://hdl.handle.net/10072/365560.

Pełny tekst źródła
Streszczenie:
In the past decade, Australian industry, and particularly the mining industry, has witnessed the development of several large “super-projects”, most in excess of a billion dollars. These large super-projects include the exploitation of Australia’s mineral wealth in alumina, copper, iron, nickel, uranium, and zinc, through the construction of huge complex industrial process plant ranging in cost from one to two billion dollars. Although these super-projects create many thousands of jobs resulting in significant decreases in unemployment especially during construction, as well as projected increases in the wealth and growth of the Australian economy, they bear a high risk in achieving their forecast profitability through maintaining budgeted costs. Most of the super-projects have either exceeded their budgeted establishment costs, or have experienced operational costs far in excess of what was originally estimated in their feasibility prospectus scope. Some of the more significant contributors to the cost “blow-outs” experienced by these super-projects can be attributed to the complexity of their engineering design, both in technology and in the complex integration of systems, as well as a lack of meticulous project management.
Thesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Engineering
Science, Environment, Engineering and Technology
Full Text
Style APA, Harvard, Vancouver, ISO itp.
5

Tinley, Yvette Marie. "Identification parades : upholding the integrity of the criminal justice process?" Thesis, University of Birmingham, 2001. http://etheses.bham.ac.uk//id/eprint/5355/.

Pełny tekst źródła
Streszczenie:
Evidence from eyewitnesses is often the starting point for police investigations and it is estimated that it plays an important role in one quarter of all contested Crown Court cases. However, the memory is a fragile and malleable instrument which can produce unreliable yet convincing evidence. Because mistaken witnesses can be both honest and compelling, the risk of wrongful conviction in eyewitness identification cases is high, as is illustrated in a number of famous miscarriages of justice. This thesis assesses the sufficiency of the protections offered to defendants in cases involving eyewitness identification by examining psychological research on memory, police procedures for the collection of evidence from eyewitnesses, and judicial discretion to exclude unreliable evidence found in \(R\) \(v\) \(Turnbull\) and section 78 of the Police and Criminal Evidence Act. In interview, startling levels of guessing were reported by witnesses attending identification procedures; and suspects were largely unaware of their rights. Current identification procedures are time-consuming and inefficient; and psychological research offers some guidance but few answers, precluding the usefulness of expert evidence. The thesis concludes that an increase in specialised identification officers, reform of procedures to allow for greater use of video identification, guidelines on the exercise of discretion under s.78, and judicial education regarding the importance of using a comprehensive \(Turnbull\) direction are required before an adequate level of procedural and evidential protection against erroneous identification can be offered to suspects.
Style APA, Harvard, Vancouver, ISO itp.
6

Kady, Charbel. "Managing Business Process Continuity and Integrity Using Pattern-Based Corrections". Electronic Thesis or Diss., IMT Mines Alès, 2024. http://www.theses.fr/2024EMAL0014.

Pełny tekst źródła
Streszczenie:
Cette thèse présente une approche pour la gestion des déviations dans les flux de travail utilisant le Business Process Model and Notation (BPMN). La recherche répond au besoin de gestion efficace des déviations en intégrant un cadre complet comprenant la correction des déviations basée sur des modèles et un mécanisme enrichi de State Token. L’approche est testée par une étude de cas dans le domaine de l’apiculture, démontrant l’applicabilité pratique et l’efficacité de la méthode proposée. Les contributions clés incluent le développement d’une bibliothèque de modèles, la caractérisation des éléments BPMN et un mécanisme pour aider à la prise de décision dans la gestion des déviations. Les résultats montrent que l’approche peut corriger efficacement les déviations, assurant la continuité et l’intégrité du flux de travail
This thesis presents an approach to managing deviations in Business Process Model and Notation (BPMN) workflows. The research addresses the critical need for effective deviation management by integrating a comprehensive framework that includes pattern-based deviation correction and an enriched State Token mechanism. The approach is tested through a case study in the apiculture domain, demonstrating the practical applicability and effectiveness of the proposed method. Key contributions include the development of a library of patterns, the characterization of BPMN elements, and a mechanism to help decision-making in addressing deviations. The results show that the approach can efficiently correct deviations, ensuring workflow continuity and integrity
Style APA, Harvard, Vancouver, ISO itp.
7

Haas, Andreas. "Production integrity for hydroforming and preceding forming process using FEA techniques". Thesis, University of Wolverhampton, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.369651.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kaynak, Yusuf. "PROCESS-INDUCED SURFACE INTEGRITY IN MACHINING OF NITI SHAPE MEMORY ALLOYS". UKnowledge, 2013. https://uknowledge.uky.edu/me_etds/25.

Pełny tekst źródła
Streszczenie:
NiTi alloys have been the focus of Shape Memory Alloys (SMA) research and applications due their excellent ductility and shape memory properties, and these alloys have been extensively used in automotive, aerospace, and in biomedical applications. The effects of machining on the surface integrity and the corresponding material and mechanical properties of alloys can be best studied by utilizing NiTi alloys as workpiece material since their physical and mechanical properties are highly microstructure dependent. However, due to very poor machining performance of NiTi shape memory alloys, no comprehensive or systematic investigation on this topic has been conducted by researchers as yet. The current study makes a substantial and unique contribution to this area by making the first and significant contribution to studies on machining performance of NiTi shape memory alloys, and by achieving improved surface integrity and machining performance using cryogenic applications, which give significant reductions of tool-wear, cutting forces, and surface roughness. The influence of machining process conditions, including dry, MQL, preheated, cryogenic machining, and the effects of prefroze cryo machining on surface integrity characteristics such as microhardness, phase transformation, phase transformation temperature, depth of plastically deformed layer have been examined extensively, and unique findings have been obtained. The effects of machining process conditions, in particular preheated and cryogenic machining conditions, on thermo-mechanical and shape memory characteristics were identified through thermal cycling and stress-strain tests. For the first time, orthogonal cutting of NiTi shape memory alloys has been carried out in this study to investigate surface integrity comprehensively. Surface integrity and machining performance are compared for dry and prefroze cryogenic cooling conditions under a wide range of cutting speeds. Stress-induced martensitic phase transformation and deformation twinning were found in prefroze cryogenic and dry cutting conditions respectively. The existing microstructure-based constitutive models were used and modified to predict machining-induced phase transformation and resulting volume fraction. The modified model was implemented in commercial FEM software (DEFORM-2D) as a customized user subroutine. The obtained results from simulation and orthogonal cutting tests were compared considering martensitic volume fraction during cutting with various cutting speeds. The model captured the experimental trend of volume fraction induced by various cutting speeds and process variables. Overall, FEM simulation of cutting process of NiTi was successfully presented.
Style APA, Harvard, Vancouver, ISO itp.
9

Nelson, Stacy A. "The role of sand erosion in the integrity of process pipe-work". Thesis, University of Aberdeen, 2004. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU203463.

Pełny tekst źródła
Streszczenie:
Sand erosion in process pipe-work is one of the key contributors to hydrocarbon leaks in the offshore industry. The parameters influencing the erosion process are numerous and a review of investigations presented in the literature has classified these in terms of particle, fluid and material properties. A review of the mechanistic and empirical erosion models currently available to predict the amount of erosion is also presented. This review highlighted the need for a quantitative investigation into the effect of surface roughness on the erosion process, as this has not been investigated or included in any of the models presented in the literature. The experimental investigations were twofold. The first set of experiments, referred to as the Surface Morphology experiments, utilised optical and scanning electron microscopy (SEM) to investigate the mechanisms of material removal of ductile target materials, when subjected to erosion by sand particles entrained in a liquid medium. Particle impingement was at impact angles oblique (30°) and normal (90°) to the material surface. The second set of experiments, referred to as the Surface Profile experiments, utilised surface profilometry to monitor the changes in the surface profile of mild steel plate specimens, when subjected to erosion at an oblique (30°) impact angle. Fast Fourier Transforms were used to convert the surface profile scans into wave-number spectra, to facilitate better monitoring of the changes in the material surface over the erosion exposure period. Five specimens with initial average surface roughness Ra in the range of 0.7 microm to 1.14 microm were used. The investigation showed that the surface roughness parameter plays a significant role in the erosion process, particularly in the initial stages. The operating conditions of the impinging jet were associated with an equilibrium condition, both for the surface roughness and the eroded depth. As a result, specimens having an initial surface roughness value greater than the equilibrium Rae value showed a decrease in surface roughness, whereas those having an initial value less than the equilibrium value showed an increase in surface roughness. This trend was confirmed by the changes in the amplitudes of the wave-number spectra for each plate, over the erosion period. The eroded depth was greatest for the plate having the smallest absolute difference between the initial Ra value and the equilibrium Rae value. This subsequently decreased as the absolute difference between the initial and equilibrium surface roughness value increased.
Style APA, Harvard, Vancouver, ISO itp.
10

Fišerová, Zuzana. "Analýza vlivu technologických procesů na vlastnosti funkčních ploch ložisek". Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400252.

Pełny tekst źródła
Streszczenie:
The dissertation is focused on the bearing production technology issues. The aim of the thesis is to investigate and evaluate the influence of the technological processes on properties of the functional surfaces of an outer bearing ring. The development, rolling, grinding and turning have been selected as basic technological processes. The subject of the surface integrity research on test samples is the measurement and analysis of the quality of the machined surfaces and residual stresses in the surface layers of the bearing rings. The comparison is made in relation to the previous operations - rolling, turning and grinding.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Process Integrity"

1

Institute, Katiba. Integrity watch: How to protect the integrity of the electoral process. Nairobi, Kenya: Katiba Institute, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gupta, DC, i GA Brown, red. Gate Dielectric Integrity: Material, Process, and Tool Qualification. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2000. http://dx.doi.org/10.1520/stp1382-eb.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

C, Gupta D., Brown George A. 1937- i Conference on Gate Dielectric Integrity (1999 : San Jose, Calif.), red. Gate dielectric integrity: Material, process, and tool qualification. West Conshocken, Pa: ASTM, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Committee, on Science Engineering and Public Policy (U S. ). Panel on Scientific Responsibility and the Conduct of Research. Responsible science: Ensuring the integrity of the research process. Washington, D.C: Nationl Academy Press, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Committee on Science, Engineering, and Public Policy (U.S.). Panel on Scientific Responsibility and the Conduct of Research. Responsible science: Ensuring the integrity of the research process. Washington, D.C: National Academy Press, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Tinsley, Yvette Marie. Identification parades: Upholding the integrity of the criminal justice process? Birmingham: University of Birmingham, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

United States. National Aeronautics and Space Administration., red. Process product integrity audits: A hardware auditing technique for the "90s". [Washington, DC: National Aeronautics and Space Administration, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Lozier, Jim. Microbial removal and integrity monitoring of high-pressure membranes. Denver, CO: Awwa Research Foundation, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Gonzalez-Velazquez, Jorge Luis. Mechanical Integrity and Risk-Based Inspection of Process Equipment, Piping and Pipelines. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-61479-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

A, Ruzindana, Langseth Petter 1947- i Gakwandi A, red. Fighting corruption in Uganda: The process of building a national integrity system. Kampala, Uganda: Fountain Publishers, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Process Integrity"

1

Russ, Samuel H. "Circuit-Board Design Process". W Signal Integrity, 187–98. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86927-4_15.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gonzalez-Velazquez, Jorge Luis. "Design and Construction of Pipes and Process Equipment". W Structural Integrity, 1–37. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-61479-8_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Smolnicki, Michał, Paweł Stabla, Szymon Duda i Paweł Zielonka. "Numerical Analysis of Pultrusion Process of GFRP Composite Rebar". W Structural Integrity, 205–13. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91847-7_20.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Hauptmanns, Ulrich. "Functional Safety (Safety Integrity Levels)". W Process and Plant Safety, 583–601. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-61484-6_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Hauptmanns, Ulrich. "Functional Safety (Safety Integrity Levels)". W Process and Plant Safety, 591–610. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-40954-7_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Onyewuenyi, Oliver A. "Mechanical Integrity of Process Vessels and Piping". W Process Plant Equipment, 435–65. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118162569.ch17.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Chmelko, V., I. Berta i M. Margetin. "Influence of Heat Treatment Process to the Fatigue Properties of High Strength Steel". W Structural Integrity, 35–40. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13980-3_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Shlyannikov, Valery, i Daria Fedotova. "Crack Growth and Plastic, Fracture Process and Damage Zones Behavior Under Mixed Mode Loading". W Structural Integrity, 117–23. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47883-4_21.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Klejment, Piotr, Wojciech Dębski i Alicja Kosmala. "Particle-Based DEM Model for Simulating Brittle Cracks Evolution in Rock-like Materials During the Tensional Fracturing Process". W Structural Integrity, 215–20. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91989-8_47.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Adugna, Yosef W., Heinrich Brüggemann, Erik Hafnor, Ane Djuv, Aksel Paulsen, Hanne R. Hagland i Hirpa G. Lemu. "Study on How 3D Printer Process Parameters Can Be Optimized for Use in Orthopedics Fracture Classification and Surgical Planning". W Structural Integrity, 143–54. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49791-9_10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Process Integrity"

1

Ganpatye, Atul. "Understanding Hard Spots - Guidance for In-The-Ditch Assessment Process". W 37th International Pipeline Pigging and Integrity Management Conference 2025, 1243–46. Houston, TX, USA: Clarion Technical Conferences, 2025. https://doi.org/10.52202/078572-0071.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Wiputra, Richard, Ali Gunawan, Ervin i Arista Wijaksana. "Harnessing Blockchain and Generative AI to Prevent Certificate Forgery and Enhance Educational Integrity". W 2024 IEEE 12th Conference on Systems, Process & Control (ICSPC), 233–38. IEEE, 2024. https://doi.org/10.1109/icspc63060.2024.10862981.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Page, Andrew, Matteo Cocchini i Zhaoqing Chen. "Efficient Distribution-Based Process Corner Identification Using Machine Learning". W 2024 IEEE International Symposium on Electromagnetic Compatibility, Signal & Power Integrity (EMC+SIPI), 63–66. IEEE, 2024. http://dx.doi.org/10.1109/emcsipi49824.2024.10705634.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Cornejo, Alan, Martin Melucci, Dom Murray i Brian Kerrigan. "Improving POI of Crack Detection ILI Calls - An Operator Case Study Using a Predictive Data Driven Process". W 37th International Pipeline Pigging and Integrity Management Conference 2025, 715–26. Houston, TX, USA: Clarion Technical Conferences, 2025. https://doi.org/10.52202/078572-0041.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Durand, Samuel, Tim Rudd, Carl Scott i Brian Kerrigan. "Another Coffee Shop? An Optimised Process to Assess the Impact of Above Ground Pipeline Loading and Identify Suitable Mitigation". W 37th International Pipeline Pigging and Integrity Management Conference 2025, 627–40. Houston, TX, USA: Clarion Technical Conferences, 2025. https://doi.org/10.52202/078572-0036.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Cressent, Robin, Vincent Idasiak, Frederic Kratz i Pierre David. "Mastering safety and reliability in a model based process". W Integrity (RAMS). IEEE, 2011. http://dx.doi.org/10.1109/rams.2011.5754506.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Sarakakis, Georgios, Athanasios Gerokostopoulos i Adamantios Mettas. "Special topics for consideration in a design for reliability process". W Integrity (RAMS). IEEE, 2011. http://dx.doi.org/10.1109/rams.2011.5754445.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Huang, Xinlin, Jianmin Gao, Hongquan Jiang i Kun Chen. "A systematic fault root causes tracing method for process systems". W Integrity (RAMS). IEEE, 2011. http://dx.doi.org/10.1109/rams.2011.5754447.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Taghipour, Sharareh, i Dragan Banjevic. "Trend analysis of the power law process with censored data". W Integrity (RAMS). IEEE, 2011. http://dx.doi.org/10.1109/rams.2011.5754467.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Reyes, Alejandro, i Otto Huisman. "Formalizing Integrity Management Workflows: Towards Integrity Process Modelling". W 2018 12th International Pipeline Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/ipc2018-78512.

Pełny tekst źródła
Streszczenie:
Workflows are the fundamental building blocks of business processes in any organization today. These workflows have attributes and outputs that make up various Operational, Management and Supporting processes, which in turn produce a specific outcome in the form of business value. Risk Assessment and Direct Assessment are examples of such processes; they define the individual tasks integrity engineers should carry out. According to ISO 55000, achieving excellence in Asset Management requires clearly defined objectives, transparent and consistent decision making, as well as a long-term strategic view. Specifically, it recommends well-defined policies and procedures (processes) to bring about performance and cost improvements, improved risk management, business growth and enhanced stakeholder confidence through compliance and improved reputation. In reality, such processes are interpreted differently all over the world, and the workflows that make up these processes are often defined by individual engineers and experts. An excellent example of this is Risk Assessment, where significant local variations in data sources, threat sources and other data elements, require the business to tailor its activities and models used. Successful risk management is about enabling transparent decision-making through clearly defined process-steps, but in practice it requires maintaining a degree of flexibility to tailor the process to the specific organizational needs. In this paper, we introduce common building blocks that have been identified to make up a Risk Assessment process and further examine how these blocks can be connected to fulfill the needs of multiple stakeholders, including data administrators, integrity engineers and regulators. Moving from a broader Business Process view to a more focused Integrity Management view, this paper will demonstrate how to formalize Risk Assessment processes by describing the activities, steps and deliverables of each using Business Process Model and Notation (BPMN) as the standard modeling technique and extending it with an integrity-specific notation we have called Integrity Modelling Language or IML. It is shown that flexible modelling of integrity processes based on existing standards and best practices is possible within a structured approach; one which guides users and provides a transparent and auditable process inside the organization and beyond, based on commonalities defined by best practice guidelines, such as ISO 55000.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Process Integrity"

1

Louthan, Jr., M. R. Process water system integrity: A metallurgical evaluation. Office of Scientific and Technical Information (OSTI), marzec 1989. http://dx.doi.org/10.2172/6343280.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Scott, K. V. ,. Westinghouse Hanford. Double-Shell tank integrity examination in-process review. Office of Scientific and Technical Information (OSTI), maj 1996. http://dx.doi.org/10.2172/659227.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Arrison, Thomas. Responsible Science: Ensuring the Integrity of the Research Process. Office of Scientific and Technical Information (OSTI), marzec 2014. http://dx.doi.org/10.2172/1126508.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Gupta, N. K. Structural integrity analysis of process water system Bingham pumps. Office of Scientific and Technical Information (OSTI), październik 1992. http://dx.doi.org/10.2172/6587923.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

De Michele, Roberto, Maria Cecilia Alvarez Bollea, Mark Pieth i Kathryn Betz. Transparency and Integrity Principles in Infrastructure (TIPs). Inter-American Development Bank, marzec 2025. https://doi.org/10.18235/0013416.

Pełny tekst źródła
Streszczenie:
The Inter-American Development Bank (IDB) has identified the need to develop a set of transparency and integrity principles (TIPs) understood as a series of recommended guidelines or best practices for the infrastructure sector, building on the existing international initiatives in this field. The TIPs apply to the entire infrastructure cycle, including identification, preparation, execution, and management, and will include the different public and private actors, beneficiaries, and other stakeholders that interact in the process. The purpose of these principles is to address integrity risks throughout the infrastructure project cycle, providing institutional, legal, and financial standards for governments; public, private, and multilateral banks; and other relevant stakeholders.
Style APA, Harvard, Vancouver, ISO itp.
6

Gupta, N. K. Structural integrity analysis of process water system Bingham pumps. Task Number: 91-086-1. Office of Scientific and Technical Information (OSTI), październik 1992. http://dx.doi.org/10.2172/10152988.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Wilkowski, Gery M., David L. Rudland, Do-Jun Shim, Frederick W. Brust i Sundarsanam Babu. ADVANCED INTEGRATION OF MULTI-SCALE MECHANICS AND WELDING PROCESS SIMULATION IN WELD INTEGRITY ASSESSMENT. Office of Scientific and Technical Information (OSTI), czerwiec 2008. http://dx.doi.org/10.2172/939185.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Vitek, J. M., G. M. Wilkowski, F. W. Brust i S. Babu. Advanced Integration in Multi-Scale Mechanics and Welding Process Simulation in Weld Integrity Assessment. Office of Scientific and Technical Information (OSTI), styczeń 2008. http://dx.doi.org/10.2172/940311.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Mittelstadt. PR-430-153706-R01 Hydrostatic Test Guidelines for Integrity Management. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), lipiec 2016. http://dx.doi.org/10.55274/r0010694.

Pełny tekst źródła
Streszczenie:
This work develops a comprehensive guidance for the pipeline industry on the use of hydrostatic testing as an integrity management tool with carbon steel mainline piping as the focus of this work. Selected hydrostatic testing principles considered herein may also be applicable to other forms of transmission and facility piping. At the time of this guideline development, several parallel pipeline industry initiatives with focus on hydrostatic testing have been recently completed, or are currently on-going. Such initiatives include work performed by the Pipeline and Hazardous Materials Safety Administration (PHMSA), the American Petroleum Institute (API), the Association of Oil Pipe Lines (AOPL), and the Interstate Natural Gas Association of America (INGAA). While this completed or on-going work is of considerable value to the pipeline industry, lacking within these industry initiatives is a focus on the specific application of hydrostatic testing as a pipeline assessment tool to support integrity management plan (IMP) requirements and objectives. The scope of this work is the development of a document which will provide the necessary guid-ance to pipeline operators on the appropriate use of hydrostatic testing within the integrity and risk management process. Consideration is given to the essentials of known or assumed pipe material properties, threat type and defect populations, operating and failure history, potential risks, unintended or detrimental effects and the importance of a clear understanding of objectives, as key elements within a hydrostatic test program design process. This document does not attempt to provide practical guidance for the on-site implementation of a hydrostatic testing program. The focus of this study has instead been on hydrostatic test program decision processes and development; the selection of hydrostatic testing as an appropriate pipe-line assessment tool, the subsequent technical design of a hydrostatic test program and the necessary considerations in order to achieve IMP requirements and objectives. This report has a related webinar.
Style APA, Harvard, Vancouver, ISO itp.
10

Wilkowski. PR-276-04503-R02 Multi-Scale Mechanics and Welding Process Simulation in Weld Integrity Assessment. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2014. http://dx.doi.org/10.55274/r0010845.

Pełny tekst źródła
Streszczenie:
This report is on a jointly funded project by DOE and PRCI. The DOE version of this report was separately published in 2008. This project dealt with various aspects of prediction of the stress-based and strain-based girthweld flaw tolerance of linepipe steels, as well as some supplementary investigations.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Process Integrity” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii