Zaloguj się

Gotowe bibliografie tematyczne / Pump Industry / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Pump Industry.

Artykuły w czasopismach na temat „Pump Industry”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Pump Industry”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Ali Hikmet Akhmadov, Ali Hikmet Akhmadov, and Teymur Aghazadeh Teymur Aghazadeh. "POLYMER ADDITIVES IN THE COOLANT OF WATER-RING VACUUM PUMPS." ETM - Equipment, Technologies, Materials 11, no. 03 (2022): 39–44. http://dx.doi.org/10.36962/etm11032022-39.

Pełny tekst źródła

Streszczenie:

Practice shows that vacuum water ring pumps are widely used in industry. Such pumps are used in almost all areas of the oil industry, metallurgy, chemical industry, mechanical engineering, food industry, agriculture, pulp and paper industry, gas and many other areas. Taking into account all the above-mentioned areas of application, the question arises about increasing the service life and reliability of LCVs (liquid water ring pumps). This article provides a fundamental study of the theory of operation and performance of a liquid ring pump. Keywords: vacuum pump, theoretical model, coolant, fo

Style APA, Harvard, Vancouver, ISO itp.

2

Dupont, Philippe, and Tomoyoshi Okamura. "Cavitating Flow Calculations in Industry." International Journal of Rotating Machinery 9, no. 3 (2003): 163–70. http://dx.doi.org/10.1155/s1023621x03000150.

Pełny tekst źródła

Streszczenie:

This paper presents the experiences of two pump manufacturers with numerical cavitation prediction methods available in commercial computational fluid dynamic software or in codes developed in-house. The intention of the authors is to evaluate these methods and their capabilities in predicting the cavitating performance of pumps from an industrial point of view.In the first part of the article, benchmarks were set for three different commercial software packages on the basis of a comparison of measurements obtained for a centrifugal pump. In the second part, the results of a commercial code ar

Style APA, Harvard, Vancouver, ISO itp.

3

Purvis, Mark. "Pump industry analyst." World Pumps 1995, no. 349 (1995): 3. http://dx.doi.org/10.1016/s0262-1762(99)81108-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Potts, Eric. "The Indian pump Industry." Pump Industry Analyst 1997, no. 20 (1997): 10–12. http://dx.doi.org/10.1016/s1359-6128(97)80716-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Potts, Eric. "The Czech pump industry." Pump Industry Analyst 1998, no. 25 (1998): 10–11. http://dx.doi.org/10.1016/s1359-6128(98)90446-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Kleinmann, Stefan, Anna Dąbrowska, Agathe Koller-Hodac, Domenico Leonardo, and Ralf Stetter. "Model of a Combined Pump and Drive System for Advanced Control and Diagnosis." Archive of Mechanical Engineering 57, no. 4 (2010): 405–14. http://dx.doi.org/10.2478/v10180-010-0023-x.

Pełny tekst źródła

Streszczenie:

Model of a Combined Pump and Drive System for Advanced Control and Diagnosis An elaborate study executed in the direction of exploring energy saving potential shows that more than 20% of electrical energy used in industry is used for pump systems. Experts calculate that more than 30% of this energy can be saved by improving control and diagnosis for pump systems. Unfortunately, the application ratio of such system is small and consequently a large demand for such technological advanced systems can still be observed in the pump industry. Because of this reason and still growing demand of saving

Style APA, Harvard, Vancouver, ISO itp.

7

Thilak, V. M. M., S. R. Devadasan, and N. M. Sivaram. "A Literature Review on the Progression of Agile Manufacturing Paradigm and Its Scope of Application in Pump Industry." Scientific World Journal 2015 (2015): 1–9. http://dx.doi.org/10.1155/2015/297850.

Pełny tekst źródła

Streszczenie:

During the recent years, the manufacturing world has been witnessing the application of agile manufacturing paradigm. The literature review reported in this paper was carried out to study this progression. This literature review was carried out in two phases. In the first phase, the literature was reviewed to trace the origin of agile manufacturing paradigm and identify its enablers. Further, during this phase, the applications of agile manufacturing reported in literature arena were reviewed. It was also discernable that certain research works have been initiated to apply agile manufacturing

Style APA, Harvard, Vancouver, ISO itp.

8

Shikar Mammadov, Feyruz Demirov, Shikar Mammadov, Feyruz Demirov. "STUDY OF THE APPLICATION OF SPECIAL PUMPING DEVICES IN OIL AND GAS EXTRACTION." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 148, no. 02 (2024): 41–48. http://dx.doi.org/10.36962/pahtei148022024-41.

Pełny tekst źródła

Streszczenie:

The analysis of the operating conditions of electric submersible pumps applied in the Azerbaijani oil industry and ways to effectively use them, also the causes of failures occurring during equipment operation and their generalization have been presented. Analysis of the average operating period of CESPU in existing service companies, analysis of the constructive characteristics of downhole electric submersible pumps and justification of the research object selection, evaluation models for the reliability of electric submersible pumps, methods of application, types, technical specifications, c

Style APA, Harvard, Vancouver, ISO itp.

9

Kameyama, Hideo. "Chemical heat pump in the pulp and paper industry." JAPAN TAPPI JOURNAL 41, no. 7 (1987): 583–91. http://dx.doi.org/10.2524/jtappij.41.583.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Lee, Jeong Hoon, Jong Myeong Lee, Jeong Min Ha, Dong Sik Gu, and Byeong Keun Choi. "Eigenvalue Analysis of Roots Type Vacuum Pump Using FE-Method." Materials Science Forum 762 (July 2013): 668–72. http://dx.doi.org/10.4028/www.scientific.net/msf.762.668.

Pełny tekst źródła

Streszczenie:

The demand and importance of vacuum pumps are increasing, because the necessity of dry vacuum pump is proven in semiconductor industry. Various types of vacuum pumps have been developed, and in this research a roots type vacuum pump has been analyzed with a variety of mathematical analysis. Analysis of eigenvalue by FEM analysis and Modal Test were performed through the Roots type vacuum pump and using the results of irregular vibration and instability an assessment has been performed.

Style APA, Harvard, Vancouver, ISO itp.

11

Tando, Arjal, Alimuddin Linrung, Muhammad Syafrun, and Rustam Efendi. "Efek tinggi hisap terhadap kapasistas pompa sentrifugal." ARMATUR : Artikel Teknik Mesin & Manufaktur 5, no. 1 (2024): 122–27. http://dx.doi.org/10.24127/armatur.v5i1.4458.

Pełny tekst źródła

Streszczenie:

Centrifugal pumps are one type of pump commonly used in the industry, particularly in the processing and distribution of clean water. The characteristics of these pumps can be determined by varying the flow rate at a certain height. A study was conducted to investigate the effects of three different pump heights (3.5 m, 4.5 m, and 5.5 m) on the efficiency of a centrifugal pump using water at a temperature of 31℃. The results showed that the maximum overall efficiency was obtained at a height of 4.5 m with a value of 33.22% and a total head of 23.39 m. The pump height was found to have an impac

Style APA, Harvard, Vancouver, ISO itp.

12

Barafi, Keigant Abdullah, and A’rasy Fahruddin. "Damage Analysis of P-702 Centrifugal Pump A, B, C at PT. ALP Petro Industry." Procedia of Engineering and Life Science 7 (March 19, 2024): 637–43. http://dx.doi.org/10.21070/pels.v7i0.1522.

Pełny tekst źródła

Streszczenie:

A pump is a device that can move fluid from one place to another through a piping medium by adding energy to the fluid being moved and this occurs continuously. Centrifugal pumps, as a type of pump that is often found in industry, work on the principle of rotation of the impeller as a fluid transfer element driven by a prime mover. Sudden drops in pump performance and instability in operation often become serious problems and disrupt overall system performance. Vibration analysis is the key to successful predictive maintenance because the condition of rotating equipment in operation can be see

Style APA, Harvard, Vancouver, ISO itp.

13

Abdullah Barafi, Keigen, and A’rasy Fahruddin. "Damage Analysis Of P-702 Centrifugal Pump A, B, C PT. Alp Petro Industry." Procedia of Engineering and Life Science 7 (March 20, 2024): 516–22. http://dx.doi.org/10.21070/pels.v7i0.1521.

Pełny tekst źródła

Streszczenie:

A pump is a device that can move fluid from one place to another through a piping medium by adding energy to the fluid being moved and this occurs continuously. Centrifugal pumps, as a type of pump that is often found in industry, work on the principle of rotation of the impeller as a fluid transfer element driven by a prime mover. Sudden drops in pump performance and instability in operation often become serious problems and disrupt overall system performance. Vibration analysis is the key to successful predictive maintenance because the condition of rotating equipment in operation can be see

Style APA, Harvard, Vancouver, ISO itp.

14

Asuaje, Miguel, Jens Toteff, and Ricardo Noguera. "Evaluation of a Jet-Pump for the Improvement of Oil-Water Flow in Pipeline Loops Using CFD Tools." E3S Web of Conferences 321 (2021): 02012. http://dx.doi.org/10.1051/e3sconf/202132102012.

Pełny tekst źródła

Streszczenie:

Despite their low efficiency compared with centrifugal pumps, jet pumps are highly reliable, robust equipment with modest maintenance, ideal for many applications, mainly in the oil & gas industry. Jet pumps are conventionally used to draw fluid from a storage tank in the petrochemical industry or as an artificial lift system to produce oil from a reservoir using energy from the primary fluid. The trunk lines in oil production systems can experience an unfavourable phenomenon due to the fluid's low velocities. In the case of transporting a heavy oil-water mixture with low flow velocities,

Style APA, Harvard, Vancouver, ISO itp.

15

Huseynli, Z., and C. Babazade. "THE RESEARCH OF INCREASING THE RELIABILITY OF THE SEALING UNIT OF CENTRIFUGAL PUMPS." Sciences of Europe, no. 146 (August 8, 2024): 53–56. https://doi.org/10.5281/zenodo.13267874.

Pełny tekst źródła

Streszczenie:

The article examines the causes of failures that occur in the sealing units of a centrifugal pump during operation. Centrifugal pumps are one of the most widely used devices in the oil and gas industry and manufacturing. Ease of repair and high performance compared to other pumps is one of the main factors for using these pumps. In the course of experiments carried out in practice, it was found that one of the most loaded parts of pumps are sealing joints. The pump sealing parts are checked every three months in accordance with the current maintenance schedule. The goal of the work is to impro

Style APA, Harvard, Vancouver, ISO itp.

16

Handayani, Sri Utami. "KARAKTERISTIK POMPA SENTRIFUGAL ALIRAN CAMPUR DENGAN VARIABLE FREQUENCY DRIVE." ROTASI 15, no. 3 (2013): 30. http://dx.doi.org/10.14710/rotasi.15.3.30-34.

Pełny tekst źródła

Streszczenie:

In an industry that uses large centrifugal pumps continuously, pump speed setting can reduce energy consumption significantly. By changing the speed of a centrifugal pump, capacity, head, and pump power required will change according to pump affinity laws. Speed of a centrifugal pump can be changed by variable frequency drive . This study aimed to investigate the characteristics of mixed flow centrifugal pumps with variable frequency drive. The results showed that 10% of maximum speed reduction can decrease power consumtion until 50%, while the increase in the efficiency is maximum 7.2%. The p

Style APA, Harvard, Vancouver, ISO itp.

17

Abel, Godard. "eBusiness in the pump industry." World Pumps 2001, no. 418 (2001): 30–32. http://dx.doi.org/10.1016/s0262-1762(01)80285-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Potts, Eric. "The pump industry and employment." Pump Industry Analyst 1998, no. 26 (1998): 10–11. http://dx.doi.org/10.1016/s1359-6128(98)90295-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Tierney, Brendan E. "Pump industry: merger & acquisition." World Pumps 2010, no. 10 (2010): 28–32. http://dx.doi.org/10.1016/s0262-1762(10)70295-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Ostojic, Petar. "Mining industry gets pump improvements." World Pumps 2014, no. 10 (2014): 30–33. http://dx.doi.org/10.1016/s0262-1762(14)70242-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Hajar, Ibnu. "Pengaruh tipe bantalan bola pada poros pompa sentrifugal terhadap sinyal getaran." Jurnal POLIMESIN 16, no. 1 (2018): 25. http://dx.doi.org/10.30811/jpl.v16i1.552.

Pełny tekst źródła

Streszczenie:

Pompa sentrifugal merupakan salah satu pompa yang sangat banyak digunakan pada industri pengolahan, seperti industri pengolahan air minum, industri pengolahan minyak, dan pabrik kelapa sawit. Bentuknya sederhana dan biaya perawatan lebih murah. Permasalahan yang sering terjadi pada pompa sentrifugal adalah kerusakan pada bantalan poros yang diakibatkan oleh getaran, keausan, dan misalignment. Pada makalah ini membahas pengaruh tipe bantalan bola terhadap sinyal getaran poros pompa sentrifugal satu tingkat. Tujuan penelitian ini adalah mengetahui dan mendapatkan pengaruh tipe bantalan bola pada

Style APA, Harvard, Vancouver, ISO itp.

22

Naila Gasanova, Naila Gasanova, Yegane Shahmuradova Yegane Shahmuradova, and Gulsaba Mikailzade Gulsaba Mikailzade. "MODERN INVESTIGATION OF ROD WELL PUMPS." ETM - Equipment, Technologies, Materials 10, no. 02 (2022): 28–33. http://dx.doi.org/10.36962/etm10022022-28.

Pełny tekst źródła

Streszczenie:

At present, rod deep pumps are the basis of equipment widely used in the oilfield industry. These pumps are underground equipment of the rocking machine. Due to its wide application, solving problems during its operation is one of the most important and topical issues. Depending on the main characteristic features, oil well depth pumps are manufactured in various sizes and shapes. The research work studied the influence of sand on the operation of the depth pump, the accumulation of a large amount of gases at the inlet of the pump, wear on the working surfaces of the plunger, cylinder and valv

Style APA, Harvard, Vancouver, ISO itp.

23

Wheeler, A. "Pumps and pumping: What the industry wants from pump manufacturers." International Journal of Mine Water 7, no. 2 (1988): 1–6. http://dx.doi.org/10.1007/bf02505832.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Şeflek, Ali Yavuz. "Dalgıç Tip Atık Su Pompalarının Karakteristiklerinin Belirlenmesine Yönelik Test Sistemi Tasarımı." Turkish Journal of Agriculture - Food Science and Technology 7, no. 3 (2019): 475. http://dx.doi.org/10.24925/turjaf.v7i3.475-478.2455.

Pełny tekst źródła

Streszczenie:

In this study; Design and production of a fixed testing platform is made for determining characteristics properties of submersible type waste water pumps that requires between 3 - 22 kW energy. Submersible waste water pumps are used for agricultural plants (for transporting liquid animal fertilizer etc.), drain aging of waste water in bridges and underpasses and other industrial applications. Accurate determination of pump performances in pump manufacturing directly affects the improvement and development of R & D activities For this aim, this study was carried out in a firm which operates

Style APA, Harvard, Vancouver, ISO itp.

25

Baldha, Kinjal, Ankur Parmar, I. A. Chauhan, and Ketan Khant. "Milk Pump: Types, Construction, Maintenance and Use." International Journal of Advance Research and Innovation 6, no. 4 (2018): 5–11. http://dx.doi.org/10.51976/ijari.641802.

Pełny tekst źródła

Streszczenie:

A simple portable piece of equipment applied for transferring raw milk, process milk or any other fluids to process plant. Pumps are used in a wide range of industrial and residential applications. In our Dairy Industry, pumps have various applications. Dairies utilise milk pumps for the transport of milk or cream. Also in the production of yoghurt or ice cream, milk pumps are integrated into the production process. Centrifugal, liquid-ring and positive displacement pumps are significantly used in dairy industry. Now a day’s pump having unique impeller design that gives high performance effici

Style APA, Harvard, Vancouver, ISO itp.

26

Sun, Datong, and Mauricio Prado. "Modeling Gas-Liquid Head Performance of Electrical Submersible Pumps." Journal of Pressure Vessel Technology 127, no. 1 (2005): 31–38. http://dx.doi.org/10.1115/1.1845473.

Pełny tekst źródła

Streszczenie:

This study presents a new gas-liquid model to predict electrical submersible pumps head performance. The newly derived approach based on gas-liquid momentum equations along pump channels has improved the Sachdeva model (Sachdeva, R., Doty, D. R., and Schmidt, Z., 1988, “Two-Phase Flow through Electrical Submersible Pumps,” Ph.D. dissertation, The University of Tulsa, Oklahoma; 1994, “Performance of Electric Submersible Pumps in Gassy Wells,” SPE Prod. Facil., 9, pp. 55–60) in the petroleum industry and generalized the Minemura model (Minemura, K., Uchiyama, T., Shoda, S. and Kazuyuki, E., 1998

Style APA, Harvard, Vancouver, ISO itp.

27

Siddique, Omer, and Hanzla Jalil. "Exploring the Structure and Performance of Petroleum Retail Outlets in Pakistan." Pakistan Development Review 57, no. 2 (2018): 223–47. http://dx.doi.org/10.30541/v57i2pp.223-247.

Pełny tekst źródła

Streszczenie:

The petroleum retail industry is one of the least researched industries in Pakistan due to, perhaps, unavailability of the relevant data. This paper aims to fill this gap. Specifically, the present paper examines the structure and performance of petrol pumps in Pakistan, using primary survey data. Analysis of the data reveals that operating a petrol pump is a profitable venture and both location and non-locational variables are important in contributing to the profitability of a petrol pump. The exploratory analysis shows that the petrol pumps in urban areas and those on highways have higher s

Style APA, Harvard, Vancouver, ISO itp.

28

Liu, Houlin, Zhicai Wu, Shuolei Yuan, Yong Wang, and Liang Dong. "Design and Implementation of a Three-Dimensional CAD Graphics Support Platform for Pumps Based on Open CASCADE." Processes 11, no. 8 (2023): 2315. http://dx.doi.org/10.3390/pr11082315.

Pełny tekst źródła

Streszczenie:

In the pump industry, designers commonly utilize mainstream three-dimensional computer-aided design (CAD) software (Unigraphics NX 12.0 and SolidWorks 2023). However, these CAD packages are generic and not optimized for the specific requirements of the pump industry. This leads to a lack of flexibility and increased complexity in their usage, as well as higher computational demands, resulting in elevated learning and operational costs. Additionally, there are concerns about potential information leaks and software restrictions. In this paper, we studied the organization architecture of commerc

Style APA, Harvard, Vancouver, ISO itp.

29

Ali Hikmat Akhmadov, Eljan Abbasov, Ali Hikmat Akhmadov, Eljan Abbasov. "IMPROVING THE RELİABİLİTY DEVELOPMENT OF HİGH PRESSURE RECİPROCATİNG PLUNGER PUMP." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 148, no. 02 (2024): 54–58. http://dx.doi.org/10.36962/pahtei148022024-54.

Pełny tekst źródła

Streszczenie:

As it is known, the process of cementing the annular space between the pipeline and the walls of oil and gas wells is carried out with the help of pumping devices. The article considers reliability indicators of high-pressure plunger pumps used in the process of well cementing and analyses the issues of pump reliability assurance. In positive displacement pumps, pressure generation in the liquid flow and its transmission occur due to the forced change of the closed working volume created inside the pump's working bodies. The positive displacement plunger pump discussed here belongs to the grou

Style APA, Harvard, Vancouver, ISO itp.

30

Yu, Hong Mei. "Material Selection of Water-Ring Vacuum Pump in Yellow Phosphorus Tail Gas Industry." Advanced Materials Research 690-693 (May 2013): 1520–23. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.1520.

Pełny tekst źródła

Streszczenie:

Material selection of water-ring vacuum pumps in the chemical industry is closely related to the suction gas medium composition. Using the case of 70,000 tons of sodium yellow phosphorus tail gas system of water-ring vacuum pump in Guizhou Kaiyang Qingli tianmeng Chemical Ltd. (hereafter abbreviation as Tianmeng Company), this paper introduces vacuum pump in the production process of yellow phosphorus tail gas, according to the characteristics of corrosion in acidic media on flow passage component, and analyze the factors influencing the selection of materials from the point of view of the pro

Style APA, Harvard, Vancouver, ISO itp.

31

Wardjito. "PERENCANAAN INSTALASI POMPA RETURN PUMP DENGAN KAPASITAS 130 M3/JAM UNTUK EXCHANGER HEATER AMONIA." Wahana Teknik 1, no. 1 (2012): 53–64. https://doi.org/10.5281/zenodo.3693285.

Pełny tekst źródła

Streszczenie:

The use of pumps in an industry is very much its role in accordance with the functions and needs, as well as the main means of production process, as well as a means of supporting the production process. Return Pump Pump Ammonia Recycle Water Heater Exchanger absolutely necessary on a heater exchanger design Ammonia in Utility Plant X in Gresik, because the pump is an integral part of the exchanger unit heater itself, so the function of the heater can work properly is to change the temperature of the ammonia of of -33 0C  - -10 0C. Exchanger heater design capacity 55 tons / hour, requires

Style APA, Harvard, Vancouver, ISO itp.

32

Sun, Shilong, Peter W. Tse, and Y. L. Tse. "An Enhanced Factor Analysis of Performance Degradation Assessment on Slurry Pump Impellers." Shock and Vibration 2017 (2017): 1–13. http://dx.doi.org/10.1155/2017/1524840.

Pełny tekst źródła

Streszczenie:

Slurry pumps, such as oil sand pumps, are widely used in industry to convert electrical energy to slurry potential and kinetic energy. Because of adverse working conditions, slurry pump impellers are prone to suffer wear, which may result in slurry pump breakdowns. To prevent any unexpected breakdowns, slurry pump impeller performance degradation assessment should be immediately conducted to monitor the current health condition and to ensure the safety and reliability of slurry pumps. In this paper, to provide an alternative to the impeller health indicator, an enhanced factor analysis based i

Style APA, Harvard, Vancouver, ISO itp.

33

MEDETOV, Sh M., Zh K. ZHANTURIN, Zh K. ZAIDEMOVA, M. N. ABISHEV, and G. М. DOSANOVA. "NUMERICAL CALCULATIONS OF THE IMPELLER OF A CENTRIFUGAL PUMP USED IN THE OIL AND GAS INDUSTRY." Neft i Gaz 144, no. 6 (2024): 129–39. https://doi.org/10.37878/2708-0080/2024-6.09.

Pełny tekst źródła

Streszczenie:

Pumps are used to transport liquid products within technological installations inside and outside any petrochemical industry enterprise. Pumps are also used in drilling oil and gas wells. The share of centrifugal pumps at field oil treatment facilities and refineries can reach more than 80%. Centrifugal pumps are characterized by high performance, simplicity of design, compactness, versatility, uniform flow, high efficiency (for large units – 0.75-0.9), etc. The main element of a centrifugal pump is an impeller with curved blades mounted on a shaft and driven by an electric motor. In this rega

Style APA, Harvard, Vancouver, ISO itp.

34

Silver, Mary. "E-learning for the pump industry." World Pumps 2004, no. 453 (2004): 28–31. http://dx.doi.org/10.1016/s0262-1762(04)00227-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Blair, William, Sam Tinaglia, Matt Zimmer, and Matt Gooch. "Consolidation Activity in the Pump Industry." Pump Industry Analyst 2010, no. 4 (2010): 11–12. http://dx.doi.org/10.1016/s1359-6128(10)70156-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

"Intelligent pumps drive mature euro pump industry." Pump Industry Analyst 2006, no. 6 (2006): 12–13. http://dx.doi.org/10.1016/s1359-6128(06)71402-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

"Pump industry events." World Pumps 1998, no. 383 (1998): 6–7. http://dx.doi.org/10.1016/s0262-1762(98)90957-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

"Pump industry analyst." Pump Industry Analyst 1999, no. 46 (1999): 1–16. http://dx.doi.org/10.1016/s1359-6128(00)88231-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

"The French pump industry." World Pumps 1996, no. 356 (1996): 31–36. http://dx.doi.org/10.1016/s0262-1762(99)80762-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

"Pump Industry Awards 2006." World Pumps 2006, no. 473 (2006): 6. http://dx.doi.org/10.1016/s0262-1762(06)70893-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

"Pump Industry Awards 2006." World Pumps 2006, no. 474 (2006): 6–7. http://dx.doi.org/10.1016/s0262-1762(06)70924-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

"Pump Industry Awards 2006." World Pumps 2006, no. 475 (2006): 6. http://dx.doi.org/10.1016/s0262-1762(07)70043-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

"Pump Industry Awards 2007." World Pumps 2007, no. 486 (2007): 6–7. http://dx.doi.org/10.1016/s0262-1762(07)70092-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

"Pump Industry Awards 2007." World Pumps 2007, no. 489 (2007): 8. http://dx.doi.org/10.1016/s0262-1762(07)70201-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

"Pump Industry Awards 2007." World Pumps 2007, no. 490 (2007): 6. http://dx.doi.org/10.1016/s0262-1762(07)70230-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

"Pump Industry Awards finalists." World Pumps 2007, no. 492 (2007): 8–9. http://dx.doi.org/10.1016/s0262-1762(07)70299-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

"Pump Industry Awards finalists." World Pumps 2007, no. 493 (2007): 8–9. http://dx.doi.org/10.1016/s0262-1762(07)70342-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

"Pump Industry Awards 2009." World Pumps 2009, no. 513 (2009): 5. http://dx.doi.org/10.1016/s0262-1762(09)70197-x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

"Pump Industry Awards 2012." World Pumps 2012, no. 3 (2012): 4. http://dx.doi.org/10.1016/s0262-1762(12)70039-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

"Pump wins industry award." World Pumps 1995, no. 341 (1995): 18. http://dx.doi.org/10.1016/0262-1762(95)90631-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!