Zaloguj się

Gotowe bibliografie tematyczne / Recycling (Waste, etc.) Japan / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Recycling (Waste, etc.) Japan.

Artykuły w czasopismach na temat „Recycling (Waste, etc.) Japan”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 4 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Recycling (Waste, etc.) Japan”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Chaudhary, Karishma, and Prem Vrat. "Case study analysis of e-waste management systems in Germany, Switzerland, Japan and India." Benchmarking: An International Journal 25, no. 9 (November 29, 2018): 3519–40. http://dx.doi.org/10.1108/bij-07-2017-0168.

Pełny tekst źródła

Streszczenie:

Purpose The purpose of this paper is to analyze e-waste management systems in Germany, Switzerland, Japan and India and benchmark best practices in the Indian scenario. Design/methodology/approach The first part of the research paper focuses on the description of e-waste management systems in the above-mentioned countries using a case study analysis approach while the second part analyzes, evaluates and compares e-waste management systems performance based on seven performance indicators using a five-point scale. Finally, the RADAR chart approach is used to benchmark the best practices of e-wa

Style APA, Harvard, Vancouver, ISO itp.

2

Fujita, Toyohisa, Josiane Ponou, Gjergj Dodbiba, Ji-Whahn Anh, Siminig Lu, Mohammed F. Hamza, and Yuezou Wei. "Removal of Banana Tree Fungi Using Green Tuff Rock Powder Waste Containing Zeolite." Catalysts 9, no. 12 (December 10, 2019): 1049. http://dx.doi.org/10.3390/catal9121049.

Pełny tekst źródła

Streszczenie:

Hinai green tuff, which is found in Akita Prefecture, Japan, is used for the production of building materials, etc. About 60% of all stone is emitted as waste powder and therefore it is important to find ways for recycling it. In this work, the characteristics of green tuff powder have been investigated. The results of scanning electron microscope (SEM) and elemental map observations indicate that the green tuff contains TiO2 on zeolite. The green tuff can therefore be used as a natural catalyst for producing hydrogen peroxide with moisture and oxygen with light. The optimum calcined temperatu

Style APA, Harvard, Vancouver, ISO itp.

3

Widiyanto, Anugerah, Seizo Kato, Naoki Maruyama, and Yoshimasa Kojima. "Environmental Impact of Fossil Fuel Fired Co-Generation Plants Using a Numerically Standardized LCA Scheme." Journal of Energy Resources Technology 125, no. 1 (March 1, 2003): 9–16. http://dx.doi.org/10.1115/1.1510521.

Pełny tekst źródła

Streszczenie:

This paper describes the LCA environmental impacts resulting from fuel fired co-generation systems using our NETS (Numerical Eco-load Total Standard, [1]) scheme having GUI (Graphic User Interface). Following a brief introduction of the NETS evaluation method, firstly the total eco-load from commercial electricity power plants in Japan is numerically calculated in the NETS unit. We take here almost all factors into account including fuel mining, transportation and processing, plant manufacturing, assembling and its building construction, fuel consumption and maintenance during twenty durable y

Style APA, Harvard, Vancouver, ISO itp.

4

Gotoh, Sukehiro. "Waste management and recycling trends in Japan." Resources and Conservation 14 (March 1987): 15–28. http://dx.doi.org/10.1016/0166-3097(87)90010-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

OKADA, Teruo, Shigeru OHYAMA, Nozomu KATAGIRI, Masanori SHIMADA, and Sayori MAEDA. "Recycling. Treatment and Recycling Flow of Copper-Containing Waste in Japan." Shigen-to-Sozai 113, no. 12 (1997): 963–66. http://dx.doi.org/10.2473/shigentosozai.113.963.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Nifuku, Masataka. "Chemical Recycling of Municipal Waste Plastics. Feedstock Recycling Technologies for Municipal Plastic Waste in Japan." Waste Management Research 13, no. 2 (2002): 107–12. http://dx.doi.org/10.3985/wmr.13.107.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

HIJIYA, NAOHIRO. "Present Situation of Waste Paper Recycling in Japan." Sen'i Gakkaishi 50, no. 4 (1994): P137—P140. http://dx.doi.org/10.2115/fiber.50.4_p137.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Grigorieva, Larisa, and Pavel Oleinik. "Recycling Waste Wood of Construction." Materials Science Forum 871 (September 2016): 126–31. http://dx.doi.org/10.4028/www.scientific.net/msf.871.126.

Pełny tekst źródła

Streszczenie:

The article considers contemporary methods and especially recycling of wood waste. The volume of wood waste is constantly growing due to the increase in the number of buildings subject to demolition or dismantling, reconstruction and repair works. The article contains the main requirements to the raw material derived from waste. Advantages of products made from wood-polymer composite materials on physic mechanical parameters. The comparative characteristic of cost for the production of wood-polymer plastic. It is noted that production made from wood polymer composite materials has unlimited pr

Style APA, Harvard, Vancouver, ISO itp.

9

Omura, M., C. Y. Qin, H. Ohtani, R. Iwasaki, Y. Shigeno, J. S. Yu, and S. Nakazawa. "Networking possibilities for waste recycling in Miyagi prefecture, Japan." Waste Management 27, no. 5 (January 2007): 711–19. http://dx.doi.org/10.1016/j.wasman.2006.06.007.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

NAKANE, KAZUHIRO. "The Regulation and Recycling of Plastics Waste in Japan." Sen'i Gakkaishi 50, no. 5 (1994): P176—P180. http://dx.doi.org/10.2115/fiber.50.5_p176.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Honma, Satoshi, and Jin-Li Hu. "Cost efficiency of recycling and waste disposal in Japan." Journal of Cleaner Production 284 (February 2021): 125274. http://dx.doi.org/10.1016/j.jclepro.2020.125274.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

HAMA, Makoto. "Recycling Law of Containers and Packaging Waste. Waste Management of Local Governments under the New Packaging Waste Recycling System in Japan." Waste Management Research 6, no. 6 (1995): 430–38. http://dx.doi.org/10.3985/wmr.6.430.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Wu, Yong Chun, and Lian Feng Xu. "Analysis of the Barrier Factors of Municipal Solid Waste Classification Recycling." Advanced Materials Research 726-731 (August 2013): 2618–21. http://dx.doi.org/10.4028/www.scientific.net/amr.726-731.2618.

Pełny tekst źródła

Streszczenie:

Many cities in China are facing a "junk siege" dilemma, municipal solid waste classified recycling is one of the effective disposal methods of garbage scientific management, and is also the best way to waste reduction, recycling and harmless, However our municipal solid waste classification recycling remain stagnant, This paper argues that it is because of many obstacles that municipal solid waste classification recycling face makes municipal solid waste classification recycling have little effect, which include public awareness needs to be improved, the limitations of traditional garbage clas

Style APA, Harvard, Vancouver, ISO itp.

14

Yoshida, Fumikazu, and Haruyo Yoshida. "E-Waste Management in Japan: A Focus on Appliance Recycling." Advanced Materials Research 878 (January 2014): 420–23. http://dx.doi.org/10.4028/www.scientific.net/amr.878.420.

Pełny tekst źródła

Streszczenie:

As 10 years have passed since the Japanese home electrical appliance recycling system came into operation, the results of the system have become clearer, and it is therefore time for us to analyze and evaluate its performance in terms of both the environment and the economy. The system covers 4 specified house appliances, and although roughly 2/3 of these discarded appliances are collected and recycled formally by the manufactures, the greater part of the remaining 1/3 is exported as used items or scrap. Consequently, the government has issued guidelines for the reuse and recycling as counterm

Style APA, Harvard, Vancouver, ISO itp.

15

Rovin, S. L., A. S. Kalinichenko, and L. E. Rovin. "The return of the dispersed metal waste into production." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 1 (April 10, 2019): 45–48. http://dx.doi.org/10.21122/1683-6065-2019-1-45-48.

Pełny tekst źródła

Streszczenie:

The article presents an alternative method of recycling of dispersed metal waste, based on a continuous solid-liquid-phase process, implemented in rotary tilting furnaces (RTF). The new proposed method of recycling allows processing wastes with almost any composition and state from metal to oxide and multicomponent wastes (shavings, fine scrap, mill scale, aspiration dust, sludge, etc.). The wastes can be even contaminated with moisture, oil, and organic impurities. The method developed does not require preliminary preparation of the initial materials (cleaning, homogenization, pelletizing, et

Style APA, Harvard, Vancouver, ISO itp.

16

Liu, Jia You. "Waste Heat Utility Technology in Coal Mine." Applied Mechanics and Materials 170-173 (May 2012): 2723–26. http://dx.doi.org/10.4028/www.scientific.net/amm.170-173.2723.

Pełny tekst źródła

Streszczenie:

Coal mine drainage, exhaust air and bathing wastewater, etc. contain a large amount of waste heat resource. Using the waste heat effectively is beneficial to achieve energy conservation and emissions reduction and improve economic benefit for coal mine. Heat pump and heat pipe are thermal devices recycling waste heat effectively. The ways and purpose of recycling waste heat in coal mine by using water-source heat pump, air-source heat pump and heat pipe exchanger is given. The performance of heat pump and heat pipe is briefly evaluated.

Style APA, Harvard, Vancouver, ISO itp.

17

MATSUTO, Toshihiko, and Robert K. HAM. "Residential Solid Waste Generation and Recycling in the U.S.A. and Japan." Waste Management Research 2, no. 2 (1991): 149–57. http://dx.doi.org/10.3985/wmr.2.149.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Iijima, Rinzo. "Current of plastic waste recycling technologies and their prospects in Japan." Makromolekulare Chemie. Macromolecular Symposia 57, no. 1 (May 1992): 33–55. http://dx.doi.org/10.1002/masy.19920570105.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Matsuto, Toshihiko, and Robert K. Ham. "Residential Solid Waste Generation and Recycling in the U.S.a. and Japan." Waste Management & Research 8, no. 1 (January 1990): 229–42. http://dx.doi.org/10.1177/0734242x9000800139.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

MATSUTO, T., and R. HAM. "Residential solid waste generation and recycling in the U.S.A. and Japan." Waste Management & Research 8, no. 3 (June 1990): 229–42. http://dx.doi.org/10.1016/0734-242x(90)90066-v.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Purnamawati, Purnamawati. "Japan’s International Standards of Waste Recycling Treatment: Disseminating the Osaki System in Depok and Bali." International Journal of Interreligious and Intercultural Studies 4, no. 1 (June 19, 2021): 32–44. http://dx.doi.org/10.32795/ijiis.vol4.iss1.2021.1711.

Pełny tekst źródła

Streszczenie:

This research explains the importance of approach and coordination from the Osaki Town government on waste recycling management of Osaki System to the community residents and companies, for changing their mindset on responsibilities and duties. This was done since the beginning when Osaki system was created until it becomes a sustainable system in daily life. The important key aspects on implementing the Osaki system are good cooperation and bond of trust shared among the government, community residents and companies. Osaki Town has achieved no.1 in the highest rate of waste resource recycling

Style APA, Harvard, Vancouver, ISO itp.

22

Terasaki, Masanori, Kazuhiko Jozuka, and Masakazu Makino. "Identification and accumulation of aromatic sensitizers in fish from paper recycling in Japan." Environmental Toxicology and Chemistry 31, no. 6 (April 27, 2012): 1202–8. http://dx.doi.org/10.1002/etc.1812.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Zhou, Gui Zhong, Zhao Feng Wang, Xuan Wang, and Shao Xiang Li. "Recycling of Waste Hard Alloy via Electrochemical Dissolution Method." Advanced Materials Research 610-613 (December 2012): 2263–67. http://dx.doi.org/10.4028/www.scientific.net/amr.610-613.2263.

Pełny tekst źródła

Streszczenie:

Electrochemical dissolution method was used to achieve the recycling of waste hard alloy. Tungsten, cobalt powder and cobalt salts can be obtained through the control of suitable conditions of electric dissolution process ,such as cleaning of waste hard alloy, electric dissolution of waste hard alloy, knocking the basket, treatment of cobalt chloride etc. Tungsten and cobalt chloride solution can be obtained directly by this method, and thus to obtain the cobalt powder and cobalt salts. Recovery rate of WC and cobalt were above 98% and 92-95%.

Style APA, Harvard, Vancouver, ISO itp.

24

Khaertdinova, Alfira, Dilbar Sultanova, and Albert Karimov. "European waste management experience: yesterday, today, tomorrow." E3S Web of Conferences 247 (2021): 01008. http://dx.doi.org/10.1051/e3sconf/202124701008.

Pełny tekst źródła

Streszczenie:

The article presents an economic analysis of the state of municipal waste generation, utilization and recycling in the countries of the European Union and the Russian Federation. As a basis for the analysis, we used data on the 20 most representative countries that make a significant contribution to the formation of the main macroeconomic indicators of the EU. The results of the implementation of the EU environmental policy, the degree of reflection on the volume of trade in secondary raw materials, private investment in this sector, employment in the processing and recycling sectors, etc. are

Style APA, Harvard, Vancouver, ISO itp.

25

Blinová, Lenka, and Peter Godovčin. "Importance of Recycling the Waste-Cables Containing Copper and PVC." Research Papers Faculty of Materials Science and Technology Slovak University of Technology 29, no. 48 (June 1, 2021): 1–21. http://dx.doi.org/10.2478/rput-2021-0001.

Pełny tekst źródła

Streszczenie:

Abstract Urbanization, development of economy, increasing population and improved living standards and lifestyle have caused a sharp growth in waste. Inappropriate or inefficient waste disposal techniques can cause serious air, soil, and groundwater pollution, which subsequently can negatively affect the urban environment and threaten the health of residents. The goal of waste management is to move to a circular economy in which waste does not exist. If there is no possible way to reduce or reuse waste, the best solution is recycling it. Recycling brings abundant benefits on the economic and e

Style APA, Harvard, Vancouver, ISO itp.

26

Ohba, Taiji, Tomoyuki Ishikawa, Akiko Nasu, Masao Yukumoto, and Kunihiko Takeda. "Waste Treatment Technologies. Analysis on Material Flow in Recycling Society of Japan." KAGAKU KOGAKU RONBUNSHU 28, no. 5 (2002): 493–500. http://dx.doi.org/10.1252/kakoronbunshu.28.493.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Dhir, Amandeep, Suresh Malodia, Usama Awan, Mototaka Sakashita, and Puneet Kaur. "Extended valence theory perspective on consumers' e-waste recycling intentions in Japan." Journal of Cleaner Production 312 (August 2021): 127443. http://dx.doi.org/10.1016/j.jclepro.2021.127443.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Samir, Mourad, Faruz Alama, Paul Buysse, Tomas van Nylen, and Oleg Ostanin. "Disposal of Mining Waste: Classification and International Recycling Experience." E3S Web of Conferences 41 (2018): 02012. http://dx.doi.org/10.1051/e3sconf/20184102012.

Pełny tekst źródła

Streszczenie:

The main directions of mining and industrial wastes’ utilization are the production of building materials, their use in the construction industry without additional processing, and also the production of metals from metal-containing raw materials. It should be noted that current waste is preferable for the production of building materials, since they preserve the primary physical and mechanical properties and chemical composition and, moreover, can reach the consumer bypassing all other steps that are mandatory for waste consolidated (transportation, storage, etc.). For the production of build

Style APA, Harvard, Vancouver, ISO itp.

29

Wang, Bin, and HeHua Li. "Multi-objective optimization model of waste tire recycling network." E3S Web of Conferences 214 (2020): 03052. http://dx.doi.org/10.1051/e3sconf/202021403052.

Pełny tekst źródła

Streszczenie:

To achieve sustainable development, logistics enterprises need not only to reduce costs, but also to save energy for environmental protection and improve customer service level. The improvement of reverse logistics management level of waste tires is of great significance to improve the efficiency of the automobile industry. In this paper, multi-objective programming is adopted to establish the waste tire recycling network model. The decision variable is whether the network nodes are set or not, the traffic flow between nodes. Constraints include meeting customer demand, balance of flow in and

Style APA, Harvard, Vancouver, ISO itp.

30

Baba Srinivas, Adhikarla, Santosh Kumar Sar, Shweta Singh, and Santosh Yadav. "Solid Waste management from Steel Melting Shop." Journal of Applied and Advanced Research 2, no. 1 (March 21, 2017): 48. http://dx.doi.org/10.21839/jaar.2017.v2i1.55.

Pełny tekst źródła

Streszczenie:

- Production of steel in steel Industry is accomplice for the generation of solid waste materials like sludge, slag, dust etc. In recent days most part of wastes are generated from steelmaking process which is a focus point now-a-days. The solid waste generation, presently in Indian steel industry is in the range of 400 - 500 kg/t of crude steel and recycling rate varies between 40 - 70 % which lead to higher production costs, lower productivity and further environmental degradation. It is very essential not only for recycling of the waste valuable metals and mineral resources but also to prot

Style APA, Harvard, Vancouver, ISO itp.

31

Huang, Wei-Lung. "A Study of Due Recyclable Waste Containers in Taiwan." Open Environmental Sciences 7, no. 1 (November 15, 2013): 21–31. http://dx.doi.org/10.2174/1876325101307010021.

Pełny tekst źródła

Streszczenie:

This study surveys the operation modes, results and problems of the waste container recycling system in Taiwan, known as the Four-in-One Program, and compares the collation and time trend analysis of the program’s results (such as the garbage clearance volume, the recycling rate of recyclable resources, the price of plastic “Due Recyclable Waste Containers” (DRWCs), among other variables). The results show that the Four-in-One Program in Taiwan could prevent waste generation and increase recycling weight and that the program’s key contributing factors are the collective environmental conscious

Style APA, Harvard, Vancouver, ISO itp.

32

Mekonnen, Gemechu Beyene, and Akihiro Tokai. "A Historical Perspective of Municipal Solid Waste Management and Recycling System in Japan: Learning for Developing Countries." Journal of Sustainable Development 13, no. 3 (May 26, 2020): 85. http://dx.doi.org/10.5539/jsd.v13n3p85.

Pełny tekst źródła

Streszczenie:

The need for infectious disease control resulted in the establishment of a waste administration system in Japan in the early twentieth century. The unresolved sanitation problems in major cities arose from the narrow range of action by municipalities that activated the collaboration of stakeholders in 1954. The emergence of pollution problems from factories resulted in the separate treatment of industrial waste laid the cornerstone for the modern municipal solid waste (MSW) management system in 1970. The advancements reached in waste collection and transportation increased collection coverage

Style APA, Harvard, Vancouver, ISO itp.

33

Li, Xiao Peng, Yun Song, and Wei Wang. "Research on Evaluation Index System of Non-Metallic Materials Recycling Technologies from Copper Clad Laminate." Applied Mechanics and Materials 768 (June 2015): 627–35. http://dx.doi.org/10.4028/www.scientific.net/amm.768.627.

Pełny tekst źródła

Streszczenie:

The Copper Clad Laminate (CCL) residue recycling technologies are important to improve the recycling of waste circuit boards and reducing the environmental impact during its life cycle. However, there has not yet been able to have the technical evaluation criteria for CCL residue. This study demonstrates the feasibility of one recycling technology from the technical, economic, social, environmental and political, and then determinates CCL residue recycling technologies evaluation index system by Delphi Method, AHP, expert panel and Questionnaire and etc., which provides a tool for CCL residue

Style APA, Harvard, Vancouver, ISO itp.

34

Wu, Jiang-Ping, Ling Mo, Hui Zhi, Ying Peng, Lin Tao, Zi-He Ren, Xiao-Jun Luo, and Bi-Xian Mai. "Hepatic ethoxyresorufin-O -deethylase induction in the common kingfisher from an electronic waste recycling site." Environmental Toxicology and Chemistry 35, no. 6 (March 22, 2016): 1594–99. http://dx.doi.org/10.1002/etc.3294.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Ahmed, Rand R. "Produced The Compost by Recycling The Municipality Waste." Association of Arab Universities Journal of Engineering Sciences 27, no. 1 (March 31, 2020): 140–47. http://dx.doi.org/10.33261/jaaru.2019.27.1.015.

Pełny tekst źródła

Streszczenie:

Around 5000 tons of food waste are prooduced every day in Iraq, accounts for about (50%) of the waste that we get rid of .Waste sent to landfill for disposal may breakdown and produce methane gas that causes greenhouse effect ,as well as odour , epidemics , and disease because of the disintegration. The aims of the research are to produce organic fertilizer through the recycling of domestic refuse. It has been working through this research to collect the domestic food waste which represent the nitrogen source, as well as the remains of cleaning and trimming of various trees and the remains of

Style APA, Harvard, Vancouver, ISO itp.

36

Nakatani, Jun, Tamon Maruyama, and Yuichi Moriguchi. "Revealing the intersectoral material flow of plastic containers and packaging in Japan." Proceedings of the National Academy of Sciences 117, no. 33 (August 3, 2020): 19844–53. http://dx.doi.org/10.1073/pnas.2001379117.

Pełny tekst źródła

Streszczenie:

The Japanese government developed a strategy for plastics and laid out ambitious targets including the reduction of 25% for single-use plastic waste and the reuse/recycling of 60% for plastic containers and packaging by 2030. However, the current usage situation of single-use plastics including containers and packaging, which should be a basis of the strategy, is unclear. Here, we identify the nationwide material flow of plastics in Japan based on input–output tables. Of the domestic plastic demand of 8.4 Mt in 2015, 1.6 and 2.5 Mt were estimated to be for containers and packaging comprising h

Style APA, Harvard, Vancouver, ISO itp.

37

Tasaki, Tomohiro, and Misuzu Asari. "Collection and Recycling Schemes for Waste Batteries in Europe and Implications for Japan." Journal of the Japan Society of Material Cycles and Waste Management 24, no. 6 (2013): 113–24. http://dx.doi.org/10.3985/jjsmcwm.1130401.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Akaishi, Hideyuki. "An Economic Analysis of the Waste and Recycling Policy of Japan and Taiwan." International Journal of Economic Policy Studies 3, no. 1 (January 2008): 163–76. http://dx.doi.org/10.1007/bf03405711.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Asakawa, Kaoru. "Recycling Systems for Waste Plastic Containers and Packaging in Germany (EU) and Japan." Material Cycles and Waste Management Research 26, no. 4 (July 31, 2015): 275–82. http://dx.doi.org/10.3985/mcwmr.26.275.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Terazono, Atsushi, Hirokazu Hayashi, Aya Yoshida, Jun Nakatani, and Yuichi Moriguchi. "Domestic and International Material Flow of Waste PET Bottles around Japan and Waste Plastic Recycling in China." Material Cycles and Waste Management Research 22, no. 2 (2011): 125–39. http://dx.doi.org/10.3985/mcwmr.22.125.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Komatsu, T., T. Kimura, Y. Kuriyama, Y. Isshiki, T. Kawano, T. Hirao, M. Masuda, K. Yokoyama, T. Matsumoto, and M. Takeda. "Anaerobic digestion of organic waste in Japan: the first demonstration plant at Kyoto City." Water Science and Technology 45, no. 12 (June 1, 2002): 113–18. http://dx.doi.org/10.2166/wst.2002.0416.

Pełny tekst źródła

Streszczenie:

Recycling of Municipal Solid Waste is vigorously promoted in Japan and the necessity of energy recovery from organic waste is increasing. An anaerobic digestion demonstration plant for organic waste in Kyoto City, Japan has been operated for about two years. Three kinds of wastes (garbage and leftovers from hotels, yard waste and used paper) mixed at various ratios are used. The plant has maintained stable operations with each mixture, generating biogas by the decomposition of VS at the rate of about 820 m3N/ton-VS.

Style APA, Harvard, Vancouver, ISO itp.

42

HUONG, NGUYEN THI THU, and O. N. LARIN. "ANALYSIS OF THE CURRENT SITUATION WITH RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT WASTE IN VIETNAM." EKONOMIKA I UPRAVLENIE: PROBLEMY, RESHENIYA 2, no. 4 (2021): 137–45. http://dx.doi.org/10.36871/ek.up.p.r.2021.04.02.018.

Pełny tekst źródła

Streszczenie:

Today, in world practice, a rapid increase in the rate of generation of household and industrial waste is noticeable, and Vietnam, as a developing country, this problem is especially tangible. With the development of industry and technology, one of the most problematic industries in terms of waste generation is the electrical and electronic equipment industry. The products of this industry are tightly integrated into all other sectors of human life, whether it is production (refrigeration equipment, machine tools, computers, monitors, communications, etc.) or everyday life (household appliance

Style APA, Harvard, Vancouver, ISO itp.

43

Asari, Misuzu, and Shin-ichi Sakai. "Li-ion battery recycling and cobalt flow analysis in Japan." Resources, Conservation and Recycling 81 (December 2013): 52–59. http://dx.doi.org/10.1016/j.resconrec.2013.09.011.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Wu, Zhong Wei, Zhi Feng Liu, and Jian Zhao. "Recycling Experimental Research of Thermosetting Phenolic Plastic Waste Based on Mechanical Effects." Applied Mechanics and Materials 130-134 (October 2011): 1708–11. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.1708.

Pełny tekst źródła

Streszczenie:

Using adjustable speed crushing regeneration test device for the recovery experiment of thermosetting phenolic plastic waste, this paper analyses the principle of recovery process. Through particle size analytical technique, FTIR, XRD and SEM etc. various testing method is analyzed mechanochemical effects of crushing process. Research the speed, time, temperature process parameters of the influence of recycling process conditions. According to the experimental results, it established the mechanochemical model and analyzed the degradation and regeneration mechanism of thermosetting phenolic pla

Style APA, Harvard, Vancouver, ISO itp.

45

Endo, Kazuto. "Ideal quality control for waste gypsum board recycling and social implementation." Impact 2020, no. 6 (November 16, 2020): 46–48. http://dx.doi.org/10.21820/23987073.2020.6.46.

Pełny tekst źródła

Streszczenie:

Gypsum board is used all around the world as a key material for the construction industry. One of the challenges with this product is the resulting waste, the majority of which is simply thrown away. Dr Kazuto Endo, of the National Institute for Environmental Studies in Japan, has been investigating the issue of gypsum board waste recycling for the past 15 years and has been instrumental in the creation of quality guidelines for recycled gypsum powder and the implementation of these standards across the industry, resulting in higher levels of recycling and safer, more sustainable use of resour

Style APA, Harvard, Vancouver, ISO itp.

46

Shima, E., I. F. Svoboda, S. Tsutsumi, and H. Ohkubo. "Waste management systems of dairy cattle farms in Japan." Water Science and Technology 45, no. 12 (June 1, 2002): 63–69. http://dx.doi.org/10.2166/wst.2002.0410.

Pełny tekst źródła

Streszczenie:

Recently, the size of livestock farms in Japan has been expanding and the pollution from farm wastes has become a serious problem in rural areas. Therefore it is necessary to design treatment strategies and improve the recycling of livestock manure for sustainability of agriculture in Japan. The dairy cattle waste management systems were studied at dairy farms in Aomori prefecture and in Hokkaido, Japan. The four farms, typical for the respective regions in Japan, were investigated on the basis of the land and livestock size, housing, overall farm and waste management, type of machinery and a

Style APA, Harvard, Vancouver, ISO itp.

47

Rajan, Krishna, Aravinthan Gopanna, and Selvin Thomas. "A Project Based Learning (PBL) Approach Involving PET Recycling in Chemical Engineering Education." Recycling 4, no. 1 (January 27, 2019): 10. http://dx.doi.org/10.3390/recycling4010010.

Pełny tekst źródła

Streszczenie:

The recycling of waste plastics is considered as one of the strategies to tackle the issue of environmental pollution caused by commodity plastics all over the world. Recently, many universities have incorporated topics related to recycling and plastics waste management into their curricula at different levels to increase awareness as well as to develop new recycling technologies. In this study, one of the most important waste recycling problems is given as the project for the undergraduate students of chemical engineering to analyze the effectiveness of the project-based learning (PBL) approa

Style APA, Harvard, Vancouver, ISO itp.

48

Neagu-Cogălniceanu, Camelia, and Irinel Neagu-Cogălniceanu. "Thermal Embossing Method for Glass Recycling." Advanced Materials Research 1036 (October 2014): 349–54. http://dx.doi.org/10.4028/www.scientific.net/amr.1036.349.

Pełny tekst źródła

Streszczenie:

Over the past years the target for waste recovery/ recycling has significantly increased in Romania, in according with the EU Directives. Nowadays, the competitive contexts of the current market lead the manufacturers to obtain novel and custom-made products using new technologies and quality raw materials. Such resources can be consisting of low-cost waste/by-products and in the processes of converting them into value-added products. On the other hand, the necessity for recycling waste is important under the strict European legislation. Regarding glass, the key sources of waste are container/

Style APA, Harvard, Vancouver, ISO itp.

49

D’Adamo, Idiano, Michela Miliacca, and Paolo Rosa. "Economic Feasibility for Recycling of Waste Crystalline Silicon Photovoltaic Modules." International Journal of Photoenergy 2017 (2017): 1–6. http://dx.doi.org/10.1155/2017/4184676.

Pełny tekst źródła

Streszczenie:

Cumulative photovoltaic (PV) power installed in 2016 was equal to 305 GW. Five countries (China, Japan, Germany, the USA, and Italy) shared about 70% of the global power. End-of-life (EoL) management of waste PV modules requires alternative strategies than landfill, and recycling is a valid option. Technological solutions are already available in the market and environmental benefits are highlighted by the literature, while economic advantages are not well defined. The aim of this paper is investigating the financial feasibility of crystalline silicon (Si) PV module-recycling processes. Two we

Style APA, Harvard, Vancouver, ISO itp.

50

Yoshida, Fumikazu, and Haruyo Yoshida. "Japan, the European Union, and Waste Electronic and Electrical Equipment Recycling: Key Lessons Learned." Environmental Engineering Science 27, no. 1 (January 2010): 21–28. http://dx.doi.org/10.1089/ees.2009.0109.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!