Gotowe bibliografie tematyczne / Reinforced concrete Australia Design and construction

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Reinforced concrete Australia Design and construction”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 28 stycznia 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Reinforced concrete Australia Design and construction”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Reinforced concrete Australia Design and construction"

Statton, Peter, i Michael Salu. "Analysis, Design and Construction of Complex Concrete Structures for the Water Treatment Industry". Key Engineering Materials 400-402 (październik 2008): 581–86. http://dx.doi.org/10.4028/www.scientific.net/kem.400-402.581.

Pełny tekst źródła

Streszczenie:

The design and construction of concrete water treatment and storage structures in Australia has catered for the existing markets. The next generation of these structures needs a more sophisticated approach. Engineers who analyse and design water treatment plants, or water and liquid storage structures, as well as other complex reinforced and pre-stressed concrete structures, will find this paper of interest. Advanced water treatment plants and water factories for recycling domestic and industrial waste water have introduced new complexities into concrete tank design. Two recently constructed Australian water purifying plants provide examples of the theoretical and practical challenges of designing and constructing the large and complex process vessels required by modern plants to produce large volumes of high-quality water.

Style APA, Harvard, Vancouver, ISO itp.

Elbasha, Nuri Mohamed. "LIGHTER HIGH STRENGTH CONCRETE BEAM". Scientific Journal of Applied Sciences of Sabratha University 2, nr 2 (27.09.2019): 17–26. http://dx.doi.org/10.47891/sabujas.v2i2.17-26.

Pełny tekst źródła

Streszczenie:

High strength concrete (HSC) has been used extensively in civil construction projects worldwide because it reduces the cross section and the weight of long construction members. In recent years a marked increase in the use of High Strength Concrete (HSC) has been evident in Australian building construction despite the fact that the current Australian design standard provides no design rules for such a material. Very limited information on the properties of HSC and its design and construction processes are available in Australia, although in recent times many studies have been undertaken to produce material and, more importantly, to determine its characteristic. In the last 20 years there has been extensive research to economically utilize new components to improve the quality of HSC. HSC produces smaller but stronger structural elements with large spaces available. It has been studied that the cost of using HSC instead of Normal Strength Concerete (NSC) in different types of constructions. This proved that structures constructed with HSC are lighter and economical compared with those constructed with NSC. In the long term durability significantly affects project costs. In other words after several years a concrete structure needs rehabilitation or in critical cases must be demolished, therefore the price of a project consists of initial costs plus those covering any rehabilitation. A huge amount of money could be saved by utilizing the durability characteristics of high strength concrete. This study presents recent information and the benefits of high strength concrete. Also, provides in brief an experimental proof that installing a helix with a suitable pitch and diameter in the compression zone of beams significantly enhances their strength and ductility. Therefore, designers could confidently use high-strength concrete and helical confinement to design long and light reinforced concrete beams.

Style APA, Harvard, Vancouver, ISO itp.

Wong, Koon Wan, i Vanissorn Vimonsatit. "Determination of Shear Capacity for Load Rating of Concrete Bridges to AS 5100.7-2017". Infrastructures 7, nr 11 (17.11.2022): 156. http://dx.doi.org/10.3390/infrastructures7110156.

Pełny tekst źródła

Streszczenie:

According to Modified Compression Field Theory (MCFT), the ultimate shear capacity of a reinforced concrete section depends on load effects (shear, moment, torsion, and axial force) caused by factored design loads. In many design standards, including Australian AS 5100.7, MCFT has been incorporated for bridge assessment, which requires a load rating to be carried out according to the loading of the nominated rating vehicle as prescribed in the standard. Recently, some approaches have been proposed for bridge load rating that have suggested using an iterative-search procedure to determine the shear capacity by proportionally increasing the load effects until the shear capacity and shear are equal. This paper describes several adverse effects of using the proportional load, which is not consistent with the characteristic of the vehicle loading, to determine the shear capacity for load rating. Numerical examples of two bridge beams, one simply supported and the other continuous, are presented to demonstrate that the characteristic of the load effects caused by a moving vehicle is not representable by proportional load effects. Furthermore, the current practice in the bridge load rating does not load rate the longitudinal steel capacity in resisting the axial force induced by the load effects of the rating vehicle. This paper presents a new approach to the load rating that separately accounts for the load effect for axial failure mode of the longitudinal steel. Finally, it is pointed out that locating the critical section where the rating factor is minimum is tedious but can be automated by integrating load rating into the analysis of load effects.

Style APA, Harvard, Vancouver, ISO itp.

Romanenko, S. M., i Y. P. Andriievska. "TECHNICAL INSPECTION OF THE STRUCTURE AND DEVELOPMENT OF THE STRUCTURE OF FRAMES WITH COLD-ROLLED THIN-WALLED PROFILES". Modern structures of metal and wood, nr 25 (sierpień 2021): 119–29. http://dx.doi.org/10.31650/2707-3068-2021-25-119-129.

Pełny tekst źródła

Streszczenie:

Cold rolled steel structures have been known since the mid-19th century in the United States and Great Britain. Despite the advances in the development of cold-rolled structures, the level of their use was lower than that of hot-rolled structures. A significant factor that influenced this imbalance in application was the fact that there were no regulations. Into different countries of the world have their own national regulations for the calculation of cold-rolled steel structures, which have many controversies. In the European group includes the norms of the countries of the European Union, Great Britain, Hong Kong, Ukraine, Belarus, Kazakhstan; American group - the United States of America, Canada, Mexico, Australia, New Zealand, Brazil, Chile, Egypt. The regulations of such large countries as China, India and Russia have their own characteristics. The article presents the results of a technical survey of the load-bearing structures of the canopy. The survey was carried out to determine the bearing capacity of the roof load-bearing structures in relation to the location of the solar panels on the roof of the building. The construction of buildings and their structural parts from light steel thin-walled structures (profiles) is carried out in the form of light frames, the frames of which are successively connected into spatial systems. A new lightweight roof covering made of profiled sheet and a frame structure made of cold-rolled P-profile and C-profile elements for roofing and installation of solar panels are proposed. Such a coating is the most industrialized, easily and quickly erected. The analysis of constructive options for the effective placement of the profile of cold-rolled elements and joints of the frame and reinforced concrete run of the coating is carried out. The design of the frame was carried out in the software package " Лира САПР 2013" . The results of the work carried out served to draw up recommendations for restoring the properties of the load-bearing structures of the canopy, the development of design estimates and implementations into construction practice during the reconstruction of the canopy.

Style APA, Harvard, Vancouver, ISO itp.

Scutarasu, Constantin Sorin, Dan Diaconu-Şotropa i Marinela Barbuta. "Case Study on Modeling Fire Action Complexity in Fire Safety Engineering of Structures". Advanced Engineering Forum 21 (marzec 2017): 102–7. http://dx.doi.org/10.4028/www.scientific.net/aef.21.102.

Pełny tekst źródła

Streszczenie:

Important goals in the fire safety design, such as preventing loss of life and goods damage, are achieved by maintaining the stability of structures exposed to fire for a period of time established by norms and standards. Real fire scenarios confirm that the specific technical regulations which actually have a prescriptive character (both national and international) do not deal with sufficient possibilities regarding the assessment of structural fire safety. The new approach on structural safety, based on engineering notions, gives us additional prospects on it and it is included in the issues of the fire safety design of structures. A relatively new field of study, known by a few professionals focused on fire safety (but well acknowledged in the research area), fire safety design met with lots of changes and restructuring of the governing concepts and procedures and of the information with which they operate, due to the fast accumulation of experience in this area of engineering activity. Consequently, after countries such as Australia, Canada, New Zeeland or USA provided towards professionals specific technical regulations for fire safety design, groups of experts in these aforementioned countries have joined their forces to try to diminish the differences that exists between those regulations and to give a unitary character to them, a better conceptualized engineering approach of the fire safety design. The result: occurrence of the publication International Fire Engineering Guidelines (last edition from 2005). The systematic approach of fire safety design in constructions pointed, once again, the possibility of modular organization of this field of study, the relations between modules being established according to the objective or objectives in the fire safety design for a specified building. This article aims to put forward, from this modularized perspective, the study of the fire safety design of a building exposed to fire; hence, the practical part of the article exhibits the numerical simulation of initialization and development of the fire process for a large scale religious building. The main features of the building represent the amount of space that facilitates the spreading of smoke and warm gases and which increases the risk of damaging the structural reinforced concrete elements. Application calls to specific numerical simulation with a higher degree of credibility, such as those realized by the FDS (Fire Dynamics Simulation) software.

Style APA, Harvard, Vancouver, ISO itp.

Wilby, C. B. "Reinforced concrete design". Construction and Building Materials 1, nr 1 (marzec 1987): 58. http://dx.doi.org/10.1016/0950-0618(87)90068-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rady, Mohammed, Sameh Youssef Mahfouz i Salah El-Din Fahmy Taher. "Optimal Design of Reinforced Concrete Materials in Construction". Materials 15, nr 7 (2.04.2022): 2625. http://dx.doi.org/10.3390/ma15072625.

Pełny tekst źródła

Streszczenie:

The structural design process is iterative and involves many design parameters. Thus, this paper presents a controlled framework for selecting the adequate structural floor system for reinforced concrete buildings and efficiently utilizing the corresponding construction materials. Optimization was performed using an evolutionary algorithm to minimize the total construction cost, considering the costs of concrete, steel reinforcement, formwork, and labor. In the problem formulation, the characteristic compressive strength of concrete was treated as a design variable because it affects the mechanical performance of concrete. The design variables included the column spacings, concrete dimensions, and steel reinforcement of different structural components. The constraints reflected the Egyptian code of practice provisions. Because the choice of the structural floor system affects the design details, three systems were considered: solid slabs, flat slabs with drop panels, and flat slabs without drop panels. Two benchmark examples were presented, and the optimal design results of the structural floor systems were compared. The solid slab system had the lowest construction cost among the three structural floor systems. Comparative diagrams were developed to investigate the distribution of construction costs of each floor system. The results revealed that an adequate choice of design variables could save up to 17% of the building’s total construction cost.

Style APA, Harvard, Vancouver, ISO itp.

Kobielak, Sylwester. "Design and Construction of a Reinforced Concrete Dome". International Journal of Space Structures 5, nr 1 (marzec 1990): 39–47. http://dx.doi.org/10.1177/026635119000500104.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Castel, Arnaud, Raoul François, Maria Paola Santisi d’Avila i Doug Jenkins. "New service limit state criteria for reinforced concrete in chloride environments". Corrosion Reviews 37, nr 1 (28.01.2019): 21–29. http://dx.doi.org/10.1515/corrrev-2017-0100.

Pełny tekst źródła

Streszczenie:

AbstractIn chloride environments, reinforcement stress limits, intended to control flexural cracking, are one of the most important requirements for service limit state (SLS) design. However, concrete damage at the steel-concrete interface between bending cracks, so called cover-controlled cracking, is always correlated to areas of severe steel reinforcement corrosion. Based on the assumption that cover-controlled cracking should be limited, a model has been developed to provide alternative reinforcement stress limits in marine exposure conditions such as concrete in sea water, including permanently submerged, spray zone and tidal/splash zone, as well as coastal constructions located within 1 km of the shoreline. In this paper, the new reinforcement stress limitation is compared to the Australian Standards AS3600 concrete building code and AS5100.5 concrete bridge code provisions. Analysis shows that the new model is very sensitive to the reinforcement percentage of the cross-section. As a result, the existing AS3600 and AS5100.5 code provisions are more conservative than the new limitation for lightly to normally reinforced concrete cross-section. In this case, crack width control governs the SLS design. However, for normally to heavily reinforced concrete cross-section, the new model provides more conservative results suggesting that cover-controlled cracking governs the SLS design.

Style APA, Harvard, Vancouver, ISO itp.

Deineko, Andrei V., Valentina A. Kurochkina, Irina Yu Yakovleva i Aleksandr N. Starostin. "Design of reinforced concrete slabs subject to the construction joints". Vestnik MGSU, nr 9 (wrzesień 2019): 1106–20. http://dx.doi.org/10.22227/1997-0935.2019.9.1106-1120.

Pełny tekst źródła

Streszczenie:

Introduction. When erecting monolithic reinforced concrete floor slabs, a necessity of construction joints arises. The construction joints are the areas of structural weakening. The construction practice shows that the compliance with the correct technology of the construction joint arrangement is not a sufficient condition to ensure the strength balance of reinforced concrete floor slabs. As a result, the stress-deformation state calculated on the assumption of the concrete slab solidity deviates from the actual state. The relevance of the task is determined by the fact that the conformity of design and actual characteristics of the in-situ reinforced concrete structures as a whole depends on the correct calculations of construction joints. Materials and methods. The problem of implementing the construction joints in the monolithic floor slabs was considered by way of example of a residential building under construction. In the course of construction, pre-construction land surveys were carried out at the areas of the construction joint arrangement. Calculations of reinforced concrete structures using finite element method (FEM) were also performed. Results. As a result of the study, the actual deflections of the floor slabs were measured at the areas of the construction joints and FEM calculations were made on the same floor slabs, both those erected at once and those erected in stages subject to the construction joints. The difference between the calculated and actual deflections is conditioned upon the inaccurate conformity between the mathematical model and the real reinforced concrete structure, its erection and maintenance conditions. It should be noted that the deflection of horizontal reinforced concrete structures is only one of the stress-deformation state parameters that can be measured better than the others. It is shown that if the deflection of a real reinforced concrete structure does not correspond with the design estimation, the other stress-deformation state parameters will differ from the design estimation as well. Conclusions. The influence of joints can be taken into account in the scope of FEM computer-aided calculations with the explicit reproduction of the structure erection by pouring concrete, using engineering approach to the consideration of nonlinearity on the basis of the introducing reduction coefficients to the reinforced concrete effective modulus of elasticity. Solid composition modeling of reinforced concrete provides the best possibilities on taking all sorts of nonlinearity manifestations into consideration.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Reinforced concrete Australia Design and construction"

Gravina, Rebecca Jane. "Non-linear overload behaviour and ductility of reinforced concrete flexural members containing 500MPa grade steel reinforcement". Title page, contents and abstract only, 2002. http://web4.library.adelaide.edu.au/theses/09PH/09phg777.pdf.

Pełny tekst źródła

Streszczenie:

Includes corrigenda (inserted at front) and list of publications published as a result of this research. Includes bibliographical references (leaves 192-199) Investigates the overload behaviour and modes of collapse of reinforced concrete flexural members containing 500MPa grade reinforcing steel and evaluates the adequacy of current ductility requirements for design according to AS 3600 to ensure strength and safety.

Style APA, Harvard, Vancouver, ISO itp.

Wong, Anthony K. M. "Theoretical investigation of Australian designed reinforced concrete frames subjected to earthquake loading /". Title page, contents and abstract only, 1999. http://web4.library.adelaide.edu.au/theses/09ENS/09ensw872.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ho, Ching-ming Johnny, i 何正銘. "Inelastic design of reinforced concrete beams and limited ductilehigh-strength concrete columns". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B27500305.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Betaque, Andrew D. "Evaluation of software for analysis and design of reinforced concrete structures". Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-09192009-040235/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kenyon, Jonn Mark. "Non-linear analysis of reinforced concrete plane frames /". Title page, table of contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09PH/09phk368.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gao, Bo. "FRP strengthened RC beams : taper design and theoretical analysis /". View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?MECH%202005%20GAO.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zou, Xiaokang. "Optimal seismic performance-based design of reinforced concrete buildings /". View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202002%20ZOU.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Coulombe, Chantal. "Seismic retrofit of a reinforced concrete bridge bent". Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=99754.

Pełny tekst źródła

Streszczenie:

This research project is the second part of a research program carried out by Itagawa (2005) who studied the seismic response of a half-scale model of an existing Montreal bridge built in the 1960's. This project studies the seismic behaviour of the retrofit carried out on the frame structure studied in the first part of the research program. The retrofit was made following the requirements of the current Canadian Highway Bridge Design Code (CHBDC). The philosophy of the CHBDC is to provide flexural yielding in the ductile elements so that brittle failure modes such as shear are prevented. This capacity-design approach resulted in a ductile response and significant energy dissipation of the retrofitted structure.
The retrofit was designed in accordance with the CHBDC provisions. The cap beam and the beam-column joint regions were strengthened with a reinforced concrete sleeve containing additional transverse and longitudinal bars so that plastic hinging would form in the columns. This retrofit represents minimum intervention to improve the response of the frame. The retrofit frame was then subjected to both gravity loads and reversed cyclic loading to simulate seismic loading on the structure. The predictions of the response of the retrofitted frame provided reasonable estimates of first yielding in the column and the general yielding of the frame. Although the columns would not meet the requirements for ductile columns, they had sufficient shear strength and did exhibit a displacement ductility of about 2.3.

Style APA, Harvard, Vancouver, ISO itp.

黃崑 i Kun Huang. "Design and detailing of diagonally reinforced interior beam-column joints for moderate seismicity regions". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31244233.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chen, Mantai, i 陈满泰. "Combined effects of strain gradient and concrete strength on flexural strength and ductility design of RC beams and columns". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/206429.

Pełny tekst źródła

Streszczenie:

The stress-strain relationship of concrete in flexure is one of the essential parameters in assessing the flexural strength and ductility of reinforced concrete (RC) structures. An overview of previous research studies revealed that the presence of strain gradient would affect the maximum concrete stress and respective strain developed in flexure. Previously, researchers have conducted experimental studies to investigate and quantify the strain gradient effect on maximum concrete stress and respective strain by developing two strain-gradient-dependent factors k3 and ko for modifying the flexural concrete stress-strain curve. In this study, the author established a new analytical concrete constitutive model to describe the stress-strain behavior of both normal-and high-strength concrete in flexure with the effect of strain gradient considered. Based on this, comprehensive parametric studies have been conducted to investigate the combined effects of strain gradient and concrete strength on flexural strength and ductility design of RC beams and columns with concrete strength up to 100 MP a by employing the strain-gradient-dependent concrete stress-strain curve using non-linear moment-curvature analysis. From the results of the parametric studies, it is evident that both the flexural strength and ductility of RC beams and columns are improved under strain gradient effect. A design value of ultimate concrete strain of 0.0032and anew equivalent rectangular concrete stress block incorporating the combined effects of strain gradient and concrete strength have been proposed and validated by comparing the proposed theoretical strength with the strength of 198 RC beams and 275 RC columns measured experimentally by other researchers. It is apparent from the comparison that the proposed equations can predict more accurately the flexural strength of RC beams and columns than the current RC design codes. Lastly, for practical engineering design purpose, design formulas and charts have been produced for flexural strength and ductility design of RC beams and columns incorporating the combined effects of strain gradient and concrete strength.
published_or_final_version
Civil Engineering
Master
Master of Philosophy

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Reinforced concrete Australia Design and construction"

Loo, Yew-Chaye. Reinforced and prestressed concrete: Analysis and design with emphasis on application of AS3600-2009. Port Melbourne, Vic: Cambridge University Press, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

F, Limbrunner George, red. Reinforced concrete design. Wyd. 3. Englewood Cliffs, N.J: Prentice Hall, 1992.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

F, Limbrunner George, red. Reinforced concrete design. Wyd. 4. Upper Saddle River, N.J: Prentice Hall, 1998.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

F, Limbrunner George, red. Reinforced concrete design. Wyd. 2. Englewood Cliffs, N.J: Prentice-Hall, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Chu-Kia. Reinforced concrete design. Wyd. 4. New York: Harper & Row, 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Chu-Kia. Reinforced concrete design. Wyd. 5. New York, NY: HarperCollins, 1992.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Chu-Kia. Reinforced concrete design. Wyd. 6. Menlo Park, Calif: Addison-Wesley, 1998.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

O, Aghayere Abi, red. Reinforced concrete design. Wyd. 7. Upper Saddle River, NJ: Prentice Hall, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Chu-Kia. Reinforced concrete design. Wyd. 7. Hoboken, NJ: John Wiley & Sons, 2007.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Chu-kia. Reinforced concrete design. Wyd. 7. New York: Wiley, 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Reinforced concrete Australia Design and construction"

Mosley, W. H., J. H. Bungey i R. Hulse. "Composite construction". W Reinforced Concrete Design, 350–73. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-14911-7_13.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Setareh, Mehdi, i Robert Darvas. "Metric System in Reinforced Concrete Design and Construction". W Concrete Structures, 591–605. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-24115-9_10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bologna, A., i C. Gavello. "Luigi Santarella: Reinforced concrete design culture through the technical literature". W History of Construction Cultures, 509–16. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003173359-66.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Costa, Eduardo, Paul Shepherd, John Orr, Tim Ibell i Robin Oval. "Automating Concrete Construction: Digital Design of Non-prismatic Reinforced Concrete Beams". W RILEM Bookseries, 863–72. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49916-7_84.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Patil, Mahesh Navnath, i Shailendra Kumar Damodar Dubey. "Refined Methodology in Design of Reinforced Concrete Shore Pile: A Design Aid". W Recent Trends in Construction Technology and Management, 897–917. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2145-2_67.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Salem, Yasser S., Guseppe Leminto i Trung Tran. "Analytical Fragility Curves for Non-Ductile Reinforced Concrete Buildings Retrofitted with Viscoelastic Dampers". W Design and Construction of Smart Cities, 31–38. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-64217-4_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Smith, D. G. E., i A. Pomonis. "Steel reinforced concrete: The Japanese perspective on earthquake resistant composite construction". W Seismic Design Practice into the Next Century, 341–51. London: Routledge, 2022. http://dx.doi.org/10.1201/9780203740026-47.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ali, Mohamed, Imadeddin Zreid i Michael Kaliske. "Modeling of a Reinforced Concrete Column Under Cyclic Shear Loads by a Plasticity-Damage Microplane Formulation". W Design and Construction of Smart Cities, 13–21. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-64217-4_2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sonawane, Yogesh Narayan, i Shailendrakumar Damodar Dubey. "Study on Static Analysis and Design of Reinforced Concrete Exterior Beam-Column Joint". W Recent Trends in Construction Technology and Management, 887–95. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2145-2_66.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Reinforced concrete Australia Design and construction"

Solis-Navarro, Carlos, i Anna-Carin Brink. "Widening jointed reinforced concrete pavements on the Easing Sydney’s Congestion Program". W 12th International Conference on Concrete Pavements. International Society for Concrete Pavements, 2021. http://dx.doi.org/10.33593/y0qxjehe.

Pełny tekst źródła

Streszczenie:

The aim of this paper is to demonstrate how existing jointed reinforced concrete pavements (JRCPs) are incorporated in the design of new and/or widened lanes as part of the Easing Sydney's Congestion (ESC) Program. The ESC Program is one of the Transport for New South Wales' initiatives to meet the increasing demand for infrastructure in the state. At the inception of the Program in 2016, major capital expenditure was set over AU $2.1 billion over five years to 2021. NSW is the State in Australia with the largest number of concrete pavements in the urban road network; mostly JRCPs many of which are now more than 40 years old and surfaced with nominal 50 mm asphalt. As part of the more than 50 projects delivered, the existing concrete pavements required widening to allow for additional lanes and extension of turning lanes. Whilst the pavement designs had to meet minimum engineering standards with a design life of 40 years, they also needed to cater for rapid construction to mitigate disruption to road users in limited construction space. This paper will describe the approach used to gain information on the existing pavements, the different pavement structures constructed, the detailing of the widenings, the specification of various concrete mixes including high-early strength materials and lessons learnt from the construction phase.

Style APA, Harvard, Vancouver, ISO itp.

Moghassemi, Golshan, i Peyman Akhgar. "The Advent of Modern Construction Techniques in Iran: Trans-Iranian Railway Stations (1933-1938)". W The 38th Annual Conference of the Society of Architectural Historians Australia and New Zealand. online: SAHANZ, 2022. http://dx.doi.org/10.55939/a3986pe808.

Pełny tekst źródła

Streszczenie:

It was only in the early 20th century that the concept of ‘architect’, as defined in Europe, was introduced in Iran. During the nineteenth century, Iranian architects were traditional master builders (me’mars) who would learn architecture after years of working with a master. This unique change in the conception of architecture in Iran took place during the interwar period. In 1926, when Reza Shah founded the Pahlavi dynasty, his policies toward rapid modernisation transformed the way architectural design and practice was performed in Iran. Among Reza Shah’s earliest programs was the construction of numerous railway stations, extended from north to south, and for that, he invited Western-educated architects and European companies to Iran. The architecture of railway stations became one among the earliest examples of Iranian modern architecture, leading to the introduction of modern materials such as reinforced concrete to Iran. By considering Reza Shah’s nationalist policies and progressive agenda, this article investigates the architecture of railway stations, illuminating how their construction paved the way for the arrival of modern architecture and the development of construction technology in 1930s Iran.

Style APA, Harvard, Vancouver, ISO itp.

"Sustainable and Durable Reinforced Concrete Construction". W "SP-209: ACI Fifth Int Conf Innovations in Design with Emphasis on Seismic, Wind and Environmental Loading, Quality Con". American Concrete Institute, 2002. http://dx.doi.org/10.14359/12500.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Flexural Crack Control in Reinforced Concrete". W SP-204: Design and Construction Practices to Mitigate Cracking. American Concrete Institute, 2001. http://dx.doi.org/10.14359/10817.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

""Design, Construction, and Monitoring of Fiber Reinforced Polymer Reinforced Concrete Bridge Deck"". W SP-188: 4th Intl Symposium - Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures. American Concrete Institute, 1999. http://dx.doi.org/10.14359/5681.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sakai, Hideaki. "Design method for renewal from reinforced concrete slab to precast prestressed concrete slab". W Fifth International Conference on Sustainable Construction Materials and Technologies. Coventry University and The University of Wisconsin Milwaukee Centre for By-products Utilization, 2019. http://dx.doi.org/10.18552/2019/idscmt5013.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Modeling of Reinforced and Fiber-Reinforced Concrete Slabs under Impact Loads". W "SP-321: Recent Developments in Two-Way Slabs: Design, Analysis, Construction, and Evaluation". American Concrete Institute, 2017. http://dx.doi.org/10.14359/51701195.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Repair of Deteriorated Reinforced Concrete Slabs". W "SP-193: Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction - Pro". American Concrete Institute, 2000. http://dx.doi.org/10.14359/5819.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Strengthening of Reinforced Concrete Beams Using Prestressed Glass Fiber-Reinforced Plastic". W "SP-193: Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction - Pro". American Concrete Institute, 2000. http://dx.doi.org/10.14359/9968.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

"Improving Watertightness of Reinforced Concrete Structures with Shrinkage-Reducing Admixtures". W SP-204: Design and Construction Practices to Mitigate Cracking. American Concrete Institute, 2001. http://dx.doi.org/10.14359/10821.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Reinforced concrete Australia Design and construction"

Roesler, Jeffery, Sachindra Dahal, Dan Zollinger i W. Jason Weiss. Summary Findings of Re-engineered Continuously Reinforced Concrete Pavement: Volume 1. Illinois Center for Transportation, maj 2021. http://dx.doi.org/10.36501/0197-9191/21-011.

Pełny tekst źródła

Streszczenie:

This research project conducted laboratory testing on the design and impact of internal curing on concrete paving mixtures with supplementary cementitious materials and evaluated field test sections for the performance of crack properties and CRCP structure under environmental and FWD loading. Three experimental CRCP sections on Illinois Route 390 near Itasca, IL and two continuously reinforced concrete beams at UIUC ATREL test facilities were constructed and monitored. Erodibility testing was performed on foundation materials to determine the likelihood of certain combinations of materials as suitable base/subbase layers. A new post-tensioning system for CRCP was also evaluated for increased performance and cost-effectiveness. This report volume summarizes the three year research effort evaluating design, material, and construction features that have the potential for reducing the initial cost of CRCP without compromising its long-term performance.

Style APA, Harvard, Vancouver, ISO itp.

Nema, Arpit, i Jose Restrep. Low Seismic Damage Columns for Accelerated Bridge Construction. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, grudzień 2020. http://dx.doi.org/10.55461/zisp3722.

Pełny tekst źródła

Streszczenie:

This report describes the design, construction, and shaking table response and computation simulation of a Low Seismic-Damage Bridge Bent built using Accelerated Bridge Construction methods. The proposed bent combines precast post-tensioned columns with precast foundation and bent cap to simplify off- and on-site construction burdens and minimize earthquake-induced damage and associated repair costs. Each column consists of reinforced concrete cast inside a cylindrical steel shell, which acts as the formwork, and the confining and shear reinforcement. The column steel shell is engineered to facilitate the formation of a rocking interface for concentrating the deformation demands in the columns, thereby reducing earthquake-induced damage. The precast foundation and bent cap have corrugated-metal-duct lined sockets, where the columns will be placed and grouted on-site to form the column–beam joints. Large inelastic deformation demands in the structure are concentrated at the column–beam interfaces, which are designed to accommodate these demands with minimal structural damage. Longitudinal post-tensioned high-strength steel threaded bars, designed to respond elastically, ensure re-centering behavior. Internal mild steel reinforcing bars, debonded from the concrete at the interfaces, provide energy dissipation and impact mitigation.

Style APA, Harvard, Vancouver, ISO itp.

Bell, Matthew, Rob Ament, Damon Fick i Marcel Huijser. Improving Connectivity: Innovative Fiber-Reinforced Polymer Structures for Wildlife, Bicyclists, and/or Pedestrians. Nevada Department of Transportation, wrzesień 2022. http://dx.doi.org/10.15788/ndot2022.09.

Pełny tekst źródła

Streszczenie:

Engineers and ecologists continue to explore new methods and adapt existing techniques to improve highway mitigation measures that increase motorist safety and conserve wildlife species. Crossing structures, overpasses and underpasses, combined with fences, are some of the most highly effective mitigation measures employed around the world to reduce wildlife-vehicle collisions (WVCs) with large animals, increase motorist safety, and maintain habitat connectivity across transportation networks for many other types and sizes of wildlife. Published research on structural designs and materials for wildlife crossings is limited and suggests relatively little innovation has occurred. Wildlife crossing structures for large mammals are crucial for many highway mitigation strategies, so there is a need for new, resourceful, and innovative techniques to construct these structures. This report explored the promising application of fiber-reinforced polymers (FRPs) to a wildlife crossing using an overpass. The use of FRP composites has increased due to their high strength and light weight characteristics, long service life, and low maintenance costs. They are highly customizable in shape and geometry and the materials used (e.g., resins and fibers) in their manufacture. This project explored what is known about FRP bridge structures and what commercial materials are available in North America that can be adapted for use in a wildlife crossing using an overpass structure. A 12-mile section of US Highway 97 (US-97) in Siskiyou County, California was selected as the design location. Working with the California Department of Transportation (Caltrans) and California Department of Fish and Wildlife (CDFW), a site was selected for the FRP overpass design where it would help reduce WVCs and provide habitat connectivity. The benefits of a variety of FRP materials have been incorporated into the US-97 crossing design, including in the superstructure, concrete reinforcement, fencing, and light/sound barriers on the overpass. Working with Caltrans helped identify the challenges and limitations of using FRP materials for bridge construction in California. The design was used to evaluate the life cycle costs (LCCs) of using FRP materials for wildlife infrastructure compared to traditional materials (e.g., concrete, steel, and wood). The preliminary design of an FRP wildlife overpass at the US-97 site provides an example of a feasible, efficient, and constructible alternative to the use of conventional steel and concrete materials. The LCC analysis indicated the preliminary design using FRP materials could be more cost effective over a 100-year service life than ones using traditional materials.

Style APA, Harvard, Vancouver, ISO itp.

Integrated Design Optimization for Long Span Steel Transfer Truss at Redevelopment of Hong Kong Kwong Wah Hospital. The Hong Kong Institute of Steel Construction, sierpień 2022. http://dx.doi.org/10.18057/icass2020.p.365.

Pełny tekst źródła

Streszczenie:

Long-span steel trusses are increasingly used in high-rise buildings to replace reinforced concrete thick transfer plate due to light weight and high load-bearing capacity. To support multi-stories above the steel transfer truss, a comprehensive method based on second-order direct analysis method has been applied for optimization design of long-span steel transfer truss in the Redevelopment of Hong Kong Kwong Wah Hospital (KWH) – Phase 1. In the project, a 35m long-span steel transfer truss is adopted at the 3rd to 5th floors to support the above 15-story reinforced concrete structure. Innovative technologies such as the integrated global and local optimization, the integrated design and construction have been explored and made to achieve better uniformity and harmony in structure. In particular, twin trusses with better structural performance, less fabrication cost and ease of constructability are studied and finally adopted in main trusses to replace original single trusses. The optimal scheme has brought both cost and time saving in fabrication, construction, operation and maintenance stages.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!