Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Residual ratio.

Artykuły w czasopismach na temat „Residual ratio”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Residual ratio”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Schuurmans-Stekhoven, James B., and Robert Michael Buckingham. "Ratio or Length?" Journal of Individual Differences 31, no. 3 (January 2010): 150–57. http://dx.doi.org/10.1027/1614-0001/a000023.

Pełny tekst źródła
Streszczenie:
Mounting evidence suggests a link between digit ratio (2D:4D) and personality – albeit with generally small effect sizes. While the identified effects are usually attributed to in utero biochemistry, the bivariate approach favored by researchers in this area does not rule out competing explanations. After first scrutinizing the independence of 2D:4D and overall finger length, we used a multivariate approach to predict the three-dimensional EPQ-R. Given that ring finger length and digit ratio varied conjointly, we introduced a logarithm of residuals model. This new method simultaneously address
Style APA, Harvard, Vancouver, ISO itp.
2

Clancy, K. B., J. L. Elliot, and M. J. Person. "Charon/Pluto Light Ratio." Highlights of Astronomy 13 (2005): 916. http://dx.doi.org/10.1017/s1539299600017573.

Pełny tekst źródła
Streszczenie:
Prediction of the occultations of the stars P126 and P131.1 by Pluto on 2002 July 20 (UT) and August 21 (UT), respectively (Clancy et al. 2002, BAAS 34, 1212) involved astrometric data sets spanning more than three months that were acquired on several telescopes. Pluto’s position in each frame was determined relative to a UCAC astrometric reference network (Zacharias et al. 2000, AJ 120, 2131) with a dual-source point-spread function (PSF) model that was fit to the blended Pluto-Charon image. The relative position of Charon from Pluto was fixed in the PSF using values from the JPL Horizons eph
Style APA, Harvard, Vancouver, ISO itp.
3

Shen, Junshan, Wei Liang, and Shuyuan He. "Likelihood ratio inference for mean residual life." Statistical Papers 53, no. 2 (July 9, 2010): 401–8. http://dx.doi.org/10.1007/s00362-010-0345-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Tsujitani, Masaaki, and Gary G. Koch. "Residual Plots for Log Odds Ratio Regression Models." Biometrics 47, no. 3 (September 1991): 1135. http://dx.doi.org/10.2307/2532665.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kallummil, Sreejith, and Sheetal Kalyani. "Residual Ratio Thresholding for Linear Model Order Selection." IEEE Transactions on Signal Processing 67, no. 4 (February 15, 2019): 838–53. http://dx.doi.org/10.1109/tsp.2018.2886161.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Dudney, Donna M., Benjamas Jirasakuldech, Thomas Zorn, and Riza Emekter. "Do residual earnings price ratios explain cross-sectional variations in stock returns?" Managerial Finance 41, no. 7 (July 13, 2015): 692–713. http://dx.doi.org/10.1108/mf-07-2013-0179.

Pełny tekst źródła
Streszczenie:
Purpose – Variations in price/earnings (P/E) ratios are explained in a rational expectations framework by a number of fundamental factors, such as differences in growth expectations and risk. The purpose of this paper is to use a regression model and data from four sample periods (1996, 2000, 2001, and 2008) to separate the earnings/price (E/P) ratio into two parts – the portion of E/P that is related to fundamental determinants and a residual portion that cannot be explained by fundamentals. The authors use the residual portion as an indicator of over or undervaluation; a large negative resid
Style APA, Harvard, Vancouver, ISO itp.
7

Mountz, James M., Kathy Stafford-Schuck, Paul E. McKeever, James Taren, and William H. Beierwaltes. "Thallium-201 tumor/cardiac ratio estimation of residual astrocytoma." Journal of Neurosurgery 68, no. 5 (May 1988): 705–9. http://dx.doi.org/10.3171/jns.1988.68.5.0705.

Pełny tekst źródła
Streszczenie:
✓ Treatment of high-grade astrocytoma includes surgery, chemotherapy, and various methods of irradiation. Radiation therapy usually results in necrosis and edema around the primary tumor site. Contrast-enhanced computerized tomography (CT) and standard radionuclide imaging techniques are unable to reliably distinguish recurrent tumor from necrosis or edema since these images depict localization of contrast material or tracer, which primarily depends on blood-brain barrier breakdown. Thallium-201 (201Tl) appears to incorporate into viable tumor cells more rapidly than into normal brain cells. T
Style APA, Harvard, Vancouver, ISO itp.
8

LANGREHR, VIRGINIA B., and FREDERICK W. LANGREHR. "Measuring the Ability to Repay: The Residual Income Ratio." Journal of Consumer Affairs 23, no. 2 (December 1989): 393–406. http://dx.doi.org/10.1111/j.1745-6606.1989.tb00254.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Novák, Jan, Andrew Selle, and Wojciech Jarosz. "Residual ratio tracking for estimating attenuation in participating media." ACM Transactions on Graphics 33, no. 6 (November 19, 2014): 1–11. http://dx.doi.org/10.1145/2661229.2661292.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Pope, A. L., T. M. Tritt, P. C. Canfield, S. L. Bud’ko, and D. H. Liebenberg. "Thermal conductivity in large residual resistance ratio MgB2 wire." Journal of Applied Physics 93, no. 9 (May 2003): 5531–37. http://dx.doi.org/10.1063/1.1563304.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

van Diemen, Pepijn A., Ruben W. de Winter, Stefan P. Schumacher, Michiel J. Bom, Roel S. Driessen, Henk Everaars, Ruurt A. Jukema, et al. "Residual Quantitative Flow Ratio to Estimate Post‐Percutaneous Coronary Intervention Fractional Flow Reserve." Journal of Interventional Cardiology 2021 (August 31, 2021): 1–11. http://dx.doi.org/10.1155/2021/4339451.

Pełny tekst źródła
Streszczenie:
Objectives. Quantitative flow ratio (QFR) computes fractional flow reserve (FFR) based on invasive coronary angiography (ICA). Residual QFR estimates post‐percutaneous coronary intervention (PCI) FFR. This study sought to assess the relationship of residual QFR with post-PCI FFR. Methods. Residual QFR analysis, using pre-PCI ICA, was attempted in 159 vessels with post-PCI FFR. QFR lesion location was matched with the PCI location to simulate the performed intervention and allow computation of residual QFR. A post-PCI FFR < 0.90 was used to define a suboptimal PCI result. Results. Residual Q
Style APA, Harvard, Vancouver, ISO itp.
12

Zhang, Zhuang Nan, Xin Zhao, and Ya Nan Zhao. "Effects of Flange Width Ratio on the Residual Stresses in Welded Monosymmetric I-Section." Applied Mechanics and Materials 501-504 (January 2014): 574–77. http://dx.doi.org/10.4028/www.scientific.net/amm.501-504.574.

Pełny tekst źródła
Streszczenie:
This paper used ANSYS finite element software to simulate the residual stress of the welded monosymmetric I-section and obtain residual stress distribution curves, analyzed the influence of flange width ratio on welding residual stress peak value and the stress distribution. The studies have shown that: with the flange width ratio decrease gradually, peak value of residual stress in flange and web is to increase; peak value of residual tensile stresses in both flange and web close to the steel yield strength fy, peak value of residual compressive stresses is 0.4fy in wide flange and the web ne
Style APA, Harvard, Vancouver, ISO itp.
13

Zhou, Yaoming, Yongchao Wang, Shunan Dou, and Zhijun Meng. "Innovative soft fault diagnosis method for dual-redundancy sensors." Sensor Review 36, no. 1 (January 18, 2016): 14–22. http://dx.doi.org/10.1108/sr-04-2015-0062.

Pełny tekst źródła
Streszczenie:
Purpose – This paper aims to conduct soft fault diagnosis of dual-redundancy sensors. An innovative fault diagnosis method, which combines a tracking differentiator and a sequential probability ratio test, is proposed. Design/methodology/approach – First, two tracking differentiators are used to track and predict the two original signals, and determine their residuals. These residuals are used to calculate one quadratic residual. Then, a sequential probability ratio test is carried out on this quadratic residual to obtain log-likelihood ratio. A fault can be detected through comparing the log-
Style APA, Harvard, Vancouver, ISO itp.
14

Kopman, Aaron F., Jennifer Ng, Lee M. Zank, George G. Neuman, and Pamela S. Yee. "Residual Postoperative Paralysis." Anesthesiology 85, no. 6 (December 1, 1996): 1253–59. http://dx.doi.org/10.1097/00000542-199612000-00005.

Pełny tekst źródła
Streszczenie:
Background Based on a train-of-four (TOF) ratio greater than 0.70 as the standard of acceptable clinical recovery, undetected postoperative residual paralysis occurs frequently in postanesthesia care units. In most published studies, detailed information regarding anesthetic management is not provided. The authors reexamined the incidence of postoperative weakness after the administration of long- and short-acting neuromuscular blockers because few, if any, such comparative studies are available. Methods Ninety-one adult patients were studied. In group 1 (mivacurium, n = 35), anesthesia was in
Style APA, Harvard, Vancouver, ISO itp.
15

Cuddalorepatta, Gayatri K., Wim M. van Rees, Li Han, Daniel Pantuso, L. Mahadevan, and Joost J. Vlassak. "Poisson’s ratio and residual strain of freestanding ultra-thin films." Journal of the Mechanics and Physics of Solids 137 (April 2020): 103821. http://dx.doi.org/10.1016/j.jmps.2019.103821.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Chauhan, Suchitra Rajput, and Sujeet Chaudhary. "On the Residual Resistivity Ratio in $\hbox{MgB}_{2}$ Superconductors." IEEE Transactions on Applied Superconductivity 20, no. 1 (February 2010): 26–32. http://dx.doi.org/10.1109/tasc.2009.2035516.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

Zhou, Mai, and Jong-Hyeon Jeong. "Empirical likelihood ratio test for median and mean residual lifetime." Statistics in Medicine 30, no. 2 (November 5, 2010): 152–59. http://dx.doi.org/10.1002/sim.4110.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
18

YAMADA, Noriyuki, Koichi INOUE, Kenji YAMADA, Koji YOSHIDA, and Hideo SHOJI. "Effect of Compression Ratio on Combustion Under Hot Residual Gas." Proceedings of Conference of Kanto Branch 2002.8 (2002): 77–78. http://dx.doi.org/10.1299/jsmekanto.2002.8.77.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

Nobre, J. P., A. M. Dias, J. Gibmeier, and M. Kornmeier. "Local Stress-Ratio Criterion for Incremental Hole-Drilling Measurements of Shot-Peening Stresses." Journal of Engineering Materials and Technology 128, no. 2 (June 7, 2005): 193–201. http://dx.doi.org/10.1115/1.2172623.

Pełny tekst źródła
Streszczenie:
A criterion to evaluate the influence of the so-called plasticity effect on the final outcome of the incremental hole-drilling technique (IHD), for measuring residual stresses induced by mechanical surface treatments, is proposed here. In practice, it is currently accepted that residual stresses can be accurately determined by IHD if the residual stress level does not exceed about 60% of the material’s yield strength. However, this criterion is not appropriate when IHD is used to measure residual stresses in work-hardened surface layers, since the yield strength of these layers is very difficu
Style APA, Harvard, Vancouver, ISO itp.
20

Zhang, Zhuang Nan, Ya Nan Zhao, and Lu Jin. "Effects of Web Height-Thickness Ratio on Longitudinal Residual Stresses of the Welded Monosymmetric I-Section." Advanced Materials Research 671-674 (March 2013): 446–49. http://dx.doi.org/10.4028/www.scientific.net/amr.671-674.446.

Pełny tekst źródła
Streszczenie:
This paper descries work carried out using ANSYS finite element techniques to evaluate the longitudinal residual stress distributions of the welded monosymmetric I-section in various web height-thickness ratios. From the analysis results, it is shown that, with the web height to thickness ratio increased, the peak values of residual tensile and compressive stress in flange decrease, and the peak residual tensile stress in web decrease too, but the peak residual compressive stress increase. Meanwhile, the distribution width of residual tensile stress in flange and the distribution width of resi
Style APA, Harvard, Vancouver, ISO itp.
21

Yang, Jun, Jian Wang, Xuesheng Zhou, and Yanxiao Li. "Stochastic Air-Fuel Ratio Control of Compressed Natural Gas Engines Using State Observer." Mathematical Problems in Engineering 2020 (March 12, 2020): 1–8. http://dx.doi.org/10.1155/2020/2028398.

Pełny tekst źródła
Streszczenie:
In this paper, the air-fuel ratio regulation problem of compressed natural gas (CNG) engines considering stochastic L2 disturbance attenuation is researched. A state observer is designed to overcome the unmeasurability of the total air mass and total fuel mass in the cylinder, since the residual air and residual fuel that are included in the residual gas are unmeasured and the residual gas reflects stochasticity. With the proposed state observer, a stochastic robust air-fuel ratio regulator is proposed by using a CNG engine dynamic model to attenuate the uncertain cyclic fluctuation of the fre
Style APA, Harvard, Vancouver, ISO itp.
22

Cao, Hai Long, Xi Wu Li, Ya Nan Li, Hong Wei Yan, Zhi Hui Li, Yong An Zhang, Shu Hui Huang, and Bai Qing Xiong. "Numerical Simulation of Quenching and Pre-Stretching Residual Stress in 7085 Aluminum Alloy Plate." Materials Science Forum 852 (April 2016): 211–17. http://dx.doi.org/10.4028/www.scientific.net/msf.852.211.

Pełny tekst źródła
Streszczenie:
The finite element method (FEM) was used to study the quenching and pre-stretching residual stresses of the 7085 aluminum alloy plate, combining with experimental measurement. Quenching residual stress simulation results showed that the stress of the rolling-direction and transverse-direction in the center were 16.5MPa and 9.2MPa, respectively. The stress of the rolling-direction and transverse-direction on the surface were-33.8MPa and-40.4MPa, respectively. The quenching residual stress simulation results were in good agreement with the X-ray diffraction experimental results. As the pre-stret
Style APA, Harvard, Vancouver, ISO itp.
23

Larsson, Per-Lennart. "Principal Stress Ratio Effect at Residual Stress Determination Utilizing the Variation of Indentation Hardness." Lubricants 7, no. 6 (June 11, 2019): 50. http://dx.doi.org/10.3390/lubricants7060050.

Pełny tekst źródła
Streszczenie:
The determination of residual stresses is an important issue when it comes to material failure analysis. The variation of global indentation properties, due to the presence of residual stresses, can serve as a guideline for the size and direction of such stresses. One of these global indentation properties, the material hardness, is unfortunately invariant of residual stresses when metals and alloys are at issue. In this situation, one has to rely on the size of the indentation contact area for residual stress determination. For other materials such as ceramics and polymers, where elastic defo
Style APA, Harvard, Vancouver, ISO itp.
24

Mimura, Kouji, Yukio Ishikawa, Minoru Isshiki, and Masanori Kato. "Precise Purity-Evaluation of High-Purity Copper by Residual Resistivity Ratio." Materials Transactions, JIM 38, no. 8 (1997): 714–18. http://dx.doi.org/10.2320/matertrans1989.38.714.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
25

KOMATA, Shinjuro, Pucai YANG, Yuuichi UENO, and Eisaku HAMASAKI. "Numerical Analysis of the Residual Ratio of Groundwater in Reservoir Slopes." Landslides 36, no. 4 (2000): 56–60. http://dx.doi.org/10.3313/jls1964.36.56.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Matsushita, Teruo, Edmund S. Otabe, Dongho Kim, Taejong Hwang, Huixian Gao, Fang Liu, Huajun Liu, et al. "Round Robin Test of Residual Resistance Ratio of Nb3Sn Composite Superconductors." IEEE Transactions on Applied Superconductivity 28, no. 2 (March 2018): 1–5. http://dx.doi.org/10.1109/tasc.2017.2781182.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
27

Charifoulline, Z. "Residual Resistivity Ratio (RRR) Measurements of LHC Superconducting NbTi Cable Strands." IEEE Transactions on Applied Superconductivity 16, no. 2 (June 2006): 1188–91. http://dx.doi.org/10.1109/tasc.2006.873322.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
28

YAMADA, Noriyuki, Kenji YAMADA, Akira IIJIMA, Koji YOSHIDA, and Hideo SHOJI. "Effect of Hot Residual Gas on Combustion Under High Compression Ratio." Proceedings of Yamanashi District Conference 2002 (2002): 109–10. http://dx.doi.org/10.1299/jsmeyamanashi.2002.109.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
29

Welham, S. J., and R. Thompson. "Likelihood Ratio Tests for Fixed Model Terms using Residual Maximum Likelihood." Journal of the Royal Statistical Society: Series B (Statistical Methodology) 59, no. 3 (1997): 701–14. http://dx.doi.org/10.1111/1467-9868.00092.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Kang, Chul-Goo, and Jung-Han Kwak. "On a Simplified Residual Vibration Ratio Function for Input Shaping Control." Asian Journal of Control 16, no. 1 (July 17, 2012): 277–83. http://dx.doi.org/10.1002/asjc.573.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
31

Karpe, N., M. Ahlgren, J. Bo/ttiger, N. G. Chechenin, J. P. Krog, A. Nordström, and Ö. Rapp. "Disorder-induced covariation of the residual resistance ratio and superconductingTcof amorphousZr60Cu40." Physical Review B 51, no. 1 (January 1, 1995): 625–28. http://dx.doi.org/10.1103/physrevb.51.625.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
32

Xu, Xu-tang, Wen-bin Jian, Neng-sen Wu, Xiang Xu, and Lian-jin Shao. "Void Ratio–Dependent Water Retention Model for a Deformable Residual Clay." International Journal of Geomechanics 20, no. 8 (August 2020): 04020131. http://dx.doi.org/10.1061/(asce)gm.1943-5622.0001773.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

Schaible, D., M. Hirscher, and H. Kronmuller. "Residual resistivity ratio and plasticity of high-purity NiAl single crystals." Philosophical Magazine Letters 78, no. 2 (August 1998): 121–25. http://dx.doi.org/10.1080/095008398178101.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
34

Van Diemen, Pepijn, Stefan Schumacher, Michiel Bom, Roel Driessen, Henk Everaars, Ruben de Winter, Ruurt Jukema, et al. "PRE-PCI RESIDUAL QUANTITATIVE FLOW RATIO FOR ESTIMATING POST-PCI FFR." Journal of the American College of Cardiology 77, no. 18 (May 2021): 1052. http://dx.doi.org/10.1016/s0735-1097(21)02411-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
35

Ning, Zhi Qiang, Yu Chun Zhai, Hua Mei Duan, and Huai Zhong Huang. "Study on the Leaching SiO2 from Boromagnesite by Using Sodium Hydroxide." Advanced Materials Research 554-556 (July 2012): 562–64. http://dx.doi.org/10.4028/www.scientific.net/amr.554-556.562.

Pełny tekst źródła
Streszczenie:
The residual rich SiO2 slag was obtained for MgO and B2O3 was leached from the boromagnesite by ammonium sulfate. The SiO2 was leached from the residual slag by sodium hydroxide. The effect of the roasting time, calcination temperature and the ratio of sodium hydroxide to the residual slag on the leaching efficiency of SiO2 in the residual slag were also studied. The reasonable technical condition as follow : the roasting time is 60 min, the calcination temperature is 550°C, the ratio of the sodium hydroxide to the residual slag is 3.0:1. The SiO2 leached rate can be stabilized about 85% under
Style APA, Harvard, Vancouver, ISO itp.
36

Li, Yulan, David Birkes, and David R. Thomas. "The Residual Likelihood Ratio Test for the Variance Ratio in a Linear Model with Two Variance Components." Biometrical Journal 38, no. 8 (1996): 961–72. http://dx.doi.org/10.1002/bimj.4710380808.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Vaid, Y. P., and S. Sivathayalan. "Errors in estimates of void ratio of laboratory sand specimens." Canadian Geotechnical Journal 33, no. 6 (December 1, 1996): 1017–20. http://dx.doi.org/10.1139/t96-128.

Pełny tekst źródła
Streszczenie:
Serious errors in assigning void ratio to a laboratory sand specimen can occur due to poor resolutions in the measurement of its physical dimensions. The extent of these errors for given resolutions in the measurements of specimen diameter and (or) height is discussed, and their implications in estimates of undrained residual strength are pointed out in the steady-state analysis of sand structures that could be susceptible to flow slides. Alternatives for a more confident and consistent assignment of void ratio are proposed that circumvent the generally low resolutions in measurements of speci
Style APA, Harvard, Vancouver, ISO itp.
38

Zhang, Yang, Wei Zhang, Yi He Qi, and Jian Wang. "Element Bearing Ratio Based Shakedown Analysis for Branch Pipe." Advanced Materials Research 842 (November 2013): 586–90. http://dx.doi.org/10.4028/www.scientific.net/amr.842.586.

Pełny tekst źródła
Streszczenie:
Shakedown analysis is important for branch pipe because it is often damaged under various water pressure. In this paper, an element bearing ratio (EBR) based shakedown analysis method is employed for shakedown analysis of branch pipe. The EBR is used to replace the stress term in classical optimization problem in the procedure, and series of residual EBR fields can be generated by the D-value of the elastic-plastic EBR fields and the elastic EBR fields at every incremental loading step. The shakedown load is determined by performing an incremental non-linear static analysis when the yield crit
Style APA, Harvard, Vancouver, ISO itp.
39

Istiningrum, Andian Ari, and Suryati Suryati Suryati. "PENGARUH RESIDUAL INCOME DAN MARKET TO BOOK RATIO TERHADAP STOCK RETURN PADA INDUSTRI MANUFAKTUR." JURNAL ILMU MANAJEMEN 11, no. 3 (August 1, 2014): 42–60. http://dx.doi.org/10.21831/jim.v11i3.11782.

Pełny tekst źródła
Streszczenie:
The aims of this research are to determine the influence of residual income and market to book ratio toward stock return in the manufacture companies listed in the Bursa Efek Indomesia (BEI) during 2010-2012. The number of population is 135 manufacture companies and 30 manufacture companies based on the criterions are chosen as the research sample. Historical data from 2010 to 2012 is used in this research. Data is analyzed by multiple regression. The research reveals that residual income and market to book ratio individually has a positive and significant influence toward stock return. Market
Style APA, Harvard, Vancouver, ISO itp.
40

Cheng, Qiang. "What Determines Residual Income?" Accounting Review 80, no. 1 (January 1, 2005): 85–112. http://dx.doi.org/10.2308/accr.2005.80.1.85.

Pełny tekst źródła
Streszczenie:
This paper investigates the determinants of residual income scaled by book value of equity, i.e., abnormal return on equity (ROE), by analyzing the impact of value-creation (economic rents) and value-recording (conservative accounting) processes on abnormal ROE. I rely on economic theories to characterize economic rents and develop an empirical measure—the conservative accounting factor—to capture the effect of conservative accounting. As expected, industry abnormal ROE increases with industry concentration, industry-level barriers to entry, and industry conservative accounting factors. Also a
Style APA, Harvard, Vancouver, ISO itp.
41

Kumar, Gopalaiah Venkatesh, Anita Pramod Nair, Hanuman Srinivasa Murthy, Koppa Ramegowda Jalaja, Karnate Ramachandra, and Gundappa Parameshwara. "Residual Neuromuscular Blockade Affects Postoperative Pulmonary Function." Anesthesiology 117, no. 6 (December 1, 2012): 1234–44. http://dx.doi.org/10.1097/aln.0b013e3182715b80.

Pełny tekst źródła
Streszczenie:
Abstract Background Residual neuromuscular blockade (RNMB) is known to be associated with respiratory complications in the postoperative period after muscle relaxant usage. The authors hypothesized that RNMB causes reductions in pulmonary function test (PFT) parameters in the immediate postoperative period. Methods An open-label prospective randomized cohort study was conducted comparing reductions in PFT parameters due to RNMB among different neuromuscular blocking agents. One hundred and fifty patients were randomized to receive vecuronium, atracurium, or rocuronium. After reversal of neurom
Style APA, Harvard, Vancouver, ISO itp.
42

Yu, Bo, Lu Feng Yang, and Di Liu. "Probabilistic Characteristics of Residual Displacements of SDOF Systems." Applied Mechanics and Materials 275-277 (January 2013): 1419–22. http://dx.doi.org/10.4028/www.scientific.net/amm.275-277.1419.

Pełny tekst źródła
Streszczenie:
Probabilistic residual displacement analysis plays an important role in determination of technical or economical feasibility of repairing the damaged emgineering structures after an earthquake. Probabilistic characteristics of residual displacements of SDOF systems were quantificationally investigated in this study through a comprehensive statistical analysis. The influences of the P-Δ effect, period of vibration, normalized yield strength and post-yield stiffness ratio on probabilistic characteristics of residual displacements were investigated based on 69 selected earthquake records. In part
Style APA, Harvard, Vancouver, ISO itp.
43

Huang, Yangke, and Zhiming Wang. "Multi-granularity pruning for deep residual networks." Journal of Intelligent & Fuzzy Systems 39, no. 5 (November 19, 2020): 7403–10. http://dx.doi.org/10.3233/jifs-200771.

Pełny tekst źródła
Streszczenie:
Network pruning has been widely used to reduce the high computational cost of deep convolutional neural networks(CNNs). The dominant pruning methods, channel pruning, removes filters in layers based on their importance or sparsity training. But these methods often give limited acceleration ratio and encounter difficulties when pruning CNNs with skip connections. Block pruning methods take a sequence of consecutive layers (e.g., Conv-BN-ReLu) as a block and remove entire block each time. However, previous methods usually introduce new parameters to help pruning and lead additional parameters an
Style APA, Harvard, Vancouver, ISO itp.
44

Harianto, Siens, Elang Susilaputra, Peter Darto, and Ardian Fandika. "Effect of Squeeze-out and Sizing Ratio to The Residual Circumferential Stress of HFW Pipe." MATEC Web of Conferences 269 (2019): 04005. http://dx.doi.org/10.1051/matecconf/201926904005.

Pełny tekst źródła
Streszczenie:
Residual circumferential stress originates from pipe forming process has a negative impact on the pressure carrying capacity; therefore it is necessary to keep the level of residual stress as low as possible and distributed uniformly around the pipe. Manufacturing of HFW (High-Frequency Welded) pipe involves pinching, bending, forming, welding, squeezing, sizing and straightening processes in several stages which produce both elastic and plastic deformation. Those processes produce residual stresses in the pipe wall in the circumferential and longitudinal directions. This paper presents the re
Style APA, Harvard, Vancouver, ISO itp.
45

ALMEIDA, DIEGO, RICARDO B. SANTOS, PETER W. HART, and HASAN JAMEEL. "Hardwood pulping kinetics of bulk and residual phases." October 2015 14, no. 10 (November 1, 2015): 652–62. http://dx.doi.org/10.32964/tj14.10.652.

Pełny tekst źródła
Streszczenie:
The kinetics of the bulk and residual delignification phases of Eucalyptus nitens, E. globulus, E. benthamii, acacia, maple, and loblolly pine were determined in an effort to improve the use of various hardwoods. Kinetic experiments were performed using a microwave digestion system for fast heating of the kraft liquor. Delignification rates were obtained for three different temperatures (150°C, 160°C, and 170°C) and correlated with the wood’s syringyl-to-guaiacyl ratio. A linear correlation between the kraft delignification rate and the syringyl-toguaiacyl ratio was found to exist.
Style APA, Harvard, Vancouver, ISO itp.
46

Gudigar, Ashwini H. "Effect of Magnetic Treatment on Sodium Adsorption Ratio and Residual Sodium Carbonate." International Journal of Pure & Applied Bioscience 6, no. 2 (May 30, 2018): 1076–80. http://dx.doi.org/10.18782/2320-7051.6268.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
47

MURASE, Satoru, Takashi SAITOH, and Teruo MATSUSHITA. "Test Method of Residual Resistance Ratio of Cu/Nb-Ti Composite Superconductors." TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan) 33, no. 1 (1998): 2–9. http://dx.doi.org/10.2221/jcsj.33.2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Eftekhari, Ashkan, Signe Nielsen Wiggers, Ole Norling Mathiassen, and Kent Lodberg Christensen. "Residual small artery impairment in hypertensive patients with normal albumin–creatinine ratio." Scandinavian Cardiovascular Journal 50, no. 3 (March 3, 2016): 167–71. http://dx.doi.org/10.3109/14017431.2016.1152397.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

Li, Shengtao, Feng Xie, Fuyi Liu, Jianying Li, and Mohammad A. Alim. "The relation between residual voltage ratio and microstructural parameters of ZnO varistors." Materials Letters 59, no. 2-3 (February 2005): 302–7. http://dx.doi.org/10.1016/j.matlet.2004.10.008.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
50

Yan, Lin, Yukun Luo, Fang Xie, Mingbo Zhang, and Jing Xiao. "Residual vital ratio: predicting regrowth after radiofrequency ablation for benign thyroid nodules." International Journal of Hyperthermia 37, no. 1 (January 1, 2020): 1139–48. http://dx.doi.org/10.1080/02656736.2020.1825835.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!