Gotowe bibliografie tematyczne / Resistance- Capacitance (RC)

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Resistance- Capacitance (RC)”

Autor: Grafiati
Data publikacji: 2 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Resistance- Capacitance (RC)”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Resistance- Capacitance (RC)"

1

List, R. Scott, Abha Singh, Andrew Ralston та Girish Dixit. "Integration of Low-k Dielectric Materials Into Sub-0.25-μm Interconnects". MRS Bulletin 22, № 10 (1997): 61–69. http://dx.doi.org/10.1557/s0883769400034229.

Pełny tekst źródła
Streszczenie:
As the dimensions of ultralarge-scale-integration devices scale to smaller feature sizes and larger die dimensions, the resistance-capacitance (RC) delay of the metal interconnect will increasingly limit the performance of high-speed logic chips. This is because the transistor capacitance and resistance both scale to lower values as the feature size is reduced, while both the line-to-line capacitance and resistance of the metal-interconnect lines increase as their dimensions decrease. For interconnects 5-mm long, the crossover feature size at which the interconnect delay dominates the transist
Style APA, Harvard, Vancouver, ISO itp.
2

Yang, Taicong, Fengchun Tian, James A. Covington, et al. "Resistance-Capacitance Gas Sensor Based on Fractal Geometry." Chemosensors 7, no. 3 (2019): 31. http://dx.doi.org/10.3390/chemosensors7030031.

Pełny tekst źródła
Streszczenie:
An important component of any chemiresistive gas sensor is the way in which the resistance of the sensing film is interrogated. The geometrical structure of an electrode can enhance the performance of a gas-sensing device and in particular the performance of sensing films with large surface areas, such as carbon nanotubes. In this study, we investigated the influence of geometrical structure on the performance of gas sensors, combining the characteristics of carbon nanotubes with a novel gas sensor electrode structure based on fractal geometry. The fabricated sensors were tested with exposure
Style APA, Harvard, Vancouver, ISO itp.
3

Manocha, Pratyush, and Gabriel A. Rincón-Mora. "Transistor Frequency-Response Analysis: Recursive Shunt-Circuit Transformations." Electronics 14, no. 2 (2025): 296. https://doi.org/10.3390/electronics14020296.

Pełny tekst źródła
Streszczenie:
Frequency-response analysis is critical in circuit design. Frequency response encodes crucial information, like gain, accuracy, bandwidth, response time, phase shift, stability, and more. Unfortunately, existing methods are either algebraic and obscure or approximations with inaccuracies. So applying them to more complex circuits is often arduous or unreliable. This paper proposes recursive shunt-circuit transformations: a simple, rigorous, and insightful analytical method for conceptualizing and designing electronic circuits. The method asserts that (a) each equivalent capacitance shunts away
Style APA, Harvard, Vancouver, ISO itp.
4

Zhang, Xiaowei, Tingxuan Yang, and Jinghua Zhou. "Load model and parameter measurement method of DBD for power supply design." Journal of Physics: Conference Series 2527, no. 1 (2023): 012043. http://dx.doi.org/10.1088/1742-6596/2527/1/012043.

Pełny tekst źródła
Streszczenie:
Abstract Plasma is widely used in sterilization and disinfection, environmental treatment, and material surface modification. At present, the DBD load equivalent circuit model used in the design of dielectric barrier discharge (DBD) low-temperature plasma generator power supply mainly includes the nonlinear clamping model and linear resistance capacitance model, which have advantages and disadvantages in the research and application of DBD load. This paper focuses on the modeling and parameter acquisition method of the RC parallel DBD load linear model, adds measurement capacitance to the disc
Style APA, Harvard, Vancouver, ISO itp.
5

Hsueh, Jen-Chieh, Mike Kines, Yousri Ahmed Tantawy, et al. "In Situ Time-Based Sensor for Process Identification Using Amplified Back-End-of-Line Resistance and Capacitance." Sensors 25, no. 11 (2025): 3255. https://doi.org/10.3390/s25113255.

Pełny tekst źródła
Streszczenie:
This paper presents an in situ time-based sensor designed to provide process authentication. The proposed sensor leverages the inherent metal routing within the chip to measure the RC time-constants of interconnects. However, since the routing metal is typically designed to minimize resistance and capacitance, the resulting small RC time-constants pose a challenge for direct measurement. To overcome this challenge, a “three-configuration” measurement approach is introduced, incorporating two auxiliary components—poly resistor and metal-insulator-metal (MIM) capacitor—to generate three amplifie
Style APA, Harvard, Vancouver, ISO itp.
6

Zuo, Xiao Qiong, Jian Ping Jia, and Juan Lei. "A Temperature Measurement Method Based on RC Discharge Circuit Using Platinum Resistance." Advanced Materials Research 1037 (October 2014): 143–46. http://dx.doi.org/10.4028/www.scientific.net/amr.1037.143.

Pełny tekst źródła
Streszczenie:
This paper proposes a temperature measuring method of low cost and stable precision based on platinum resistance. RC discharge circuit is composed of platinum resistor and fixed capacitor,the discharge time of fixed capacitance in the circuit is used for calculating the platinum resistance temperature resistance. The experimental results show that this is a simple and low cost method .
Style APA, Harvard, Vancouver, ISO itp.
7

Tikhonov, K. V. "Study of switching overvoltages in electrical networks up to 1000 V." iPolytech Journal 27, no. 2 (2023): 370–79. http://dx.doi.org/10.21285/1814-3520-2023-2-370-379.

Pełny tekst źródła
Streszczenie:
The aim was to study the effect of switching modes on the power of supply transformers in electrical networks up to 1000 V on the multiplicity of switching overvoltages, as well as to develop recommendations for their reduction. The study was carried out during switching of supply transformers in networks up to 1000 V. Vacuum contactors were used to study overvoltages arising during switching of supply transformers. Overvoltages were recorded using an RDN-1000 active divider and a Tektronix TDS2024B digital oscilloscope. The RC circuit capacitance was measured by a Mastech MY6243 digital LC-me
Style APA, Harvard, Vancouver, ISO itp.
8

Acay, Bahar, and Mustafa Inc. "Electrical Circuits RC, LC, and RLC under Generalized Type Non-Local Singular Fractional Operator." Fractal and Fractional 5, no. 1 (2021): 9. http://dx.doi.org/10.3390/fractalfract5010009.

Pełny tekst źródła
Streszczenie:
The current study is of interest when performing a useful extension of a crucial physical problem through a non-local singular fractional operator. We provide solutions that include three arbitrary parameters α, ρ, and γ for the Resistance-Capacitance (RC), Inductance-Capacitance (LC), and Resistance-Inductance-Capacitance (RLC) electric circuits utilizing a generalized type fractional operator in the sense of Caputo, called non-local M-derivative. Additionally, to keep the dimensionality of the physical parameter in the proposed model, we use an auxiliary parameter. Owing to the fact that all
Style APA, Harvard, Vancouver, ISO itp.
9

Bououchma, Zoubida, and Sabor Jalal. "Comparison Between Recursive Least Squares Method and Kalman Filter for Online Identification of Supercapacitor State of Health." Statistics, Optimization & Information Computing 10, no. 1 (2022): 119–34. http://dx.doi.org/10.19139/soic-2310-5070-1195.

Pełny tekst źródła
Streszczenie:
Supercapacitors are electrochemical components with high-power density and an intermediate energy density between batteries and conventional capacitors. They are characterized by low series resistance, signifificant equivalent capacitance, and long service life. Nowadays, they have become an attractive alternative storage device for several applications. However, supercapacitors are subject to degradation due to aging, in addition to other factors, such as temperature and high voltage. Therefore, it is very important to be able to estimate their State-of-Health during operation. Electrochemica
Style APA, Harvard, Vancouver, ISO itp.
10

Zhang, Maosheng, Yu Bai, Shu Yang, and Kuang Sheng. "Investigation on Thermal Resistance and Capacitance Characteristics of a Highly Integrated Power Control Unit Module." Electronics 10, no. 8 (2021): 958. http://dx.doi.org/10.3390/electronics10080958.

Pełny tekst źródła
Streszczenie:
With the increasing integration density of power control unit (PCU) modules, more functional power converter units are integrated into a single module for applications in electric vehicles or hybrid electric vehicles (EVs/HEVs). Different types of power dies with different footprints are usually placed closely together. Due to the constraints from the placement of power dies and liquid cooling schemes, heat-flow paths from the junction to coolant are possibly inconsistent for power dies, resulting in different thermal resistance and capacitance (RC) characteristics of power dies. This presents
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Resistance- Capacitance (RC)"

1

Goldman, Matthew 1965. "A low sensitivity dual feedback active RC bandpass filter." Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/277139.

Pełny tekst źródła
Streszczenie:
This thesis presents the analysis and characterization of a low sensitivity dual feedback active RC bandpass filter. Chapter 2 details the analysis of the network and a method of simplifying the resultant transfer function by a single pole/zero cancellation. Chapter 3 characterizes the simplified transfer function through an analysis of the quality factor and of the center frequency gain as functions of the individual variables of the circuit. It also details sensitivity analyses of these characteristic quantities and a stability analysis. Lastly, chapter 3 presents graphical representations o
Style APA, Harvard, Vancouver, ISO itp.
2

"Audio band integrated active RC filter with digital frequency tuning." 2005. http://library.cuhk.edu.hk/record=b5892395.

Pełny tekst źródła
Streszczenie:
Yeung Nang Ching.<br>Thesis (M.Phil.)--Chinese University of Hong Kong, 2005.<br>Includes bibliographical references (leaves 72-74).<br>Abstracts in English and Chinese.<br>ACKNOWLEDGMENTS --- p.I<br>ABSTRACT --- p.II<br>摘要 --- p.III<br>TABLE OF CONTENTS --- p.IV<br>LIST OF FIGURES --- p.VII<br>LIST OF TABLES --- p.X<br>Chapter CHAPTER 1 --- INTRODUCTION --- p.1<br>Chapter 1.1 --- Overview of filter --- p.1<br>Chapter 1.1.1 --- History --- p.1<br>Chapter 1.1.2 --- Application of analog filter --- p.2<br>Chapter 1.1.3 --- Category of continuous time filters --- p.3<br>Chapter 1.1.4 -
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Resistance- Capacitance (RC)"

1

Lasek, Leon. Analiza i synteza układów generacyjnych RC. Dział Wydawnictw Politechniki Śląskiej, 1988.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kapusti͡an, V. I. Aktivnye RC-filʹtry vysokogo pori͡adka / V.I. Kapusti͡an. "Radio i svi͡azʹ", 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

W, Stephenson F., ed. RC active filter design handbook. Wiley, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Resistance- Capacitance (RC)"

1

Dehra, Himanshu. "Developments in Wireless Power Transfer Using Solar Energy." In Wireless Power Transfer – Recent Development, Applications and New Perspectives. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97099.

Pełny tekst źródła
Streszczenie:
This chapter presents state-of-the-art and major developments in wireless power transfer using solar energy. The brief state-of-the-art is presented for solar photovoltaic technologies which can be combined with wireless power transfer (WPT) to interact with the ambient solar energy. The main purpose of the solar photovoltaic system is to distribute the collected electrical energy in various small-scale power applications wirelessly. These recent developments give technology based on how to transmit electrical power without any wires, with a small-scale by using solar energy. The power can als
Style APA, Harvard, Vancouver, ISO itp.
2

Magee, Patrick, and Mark Tooley. "Electronics and Biological Signal Processing." In The Physics, Clinical Measurement and Equipment of Anaesthetic Practice for the FRCA. Oxford University Press, 2011. http://dx.doi.org/10.1093/oso/9780199595150.003.0009.

Pełny tekst źródła
Streszczenie:
This chapter continues the discussion of electricity but looks at the effect of connecting components together and briefly looks at the operational amplifier and active circuits (circuits discussed in the previous chapter have been passive ones, which involve no electronic circuits). It will then describe how the circuits can be used to process biological signals. If a resistor, an inductor and a capacitor are joined as in Figure 5.1, the magnitude of the voltage across the resistor (Vout) will vary as the input frequency, Vin, changes, because of the properties of the capacitor and inductor.
Style APA, Harvard, Vancouver, ISO itp.
3

"Investigating total ionizing dose effects on LVDS receivers with impedance spectroscopy." In Book of Abstracts - RAD 2025 Conference. RAD Centre, Niš, Serbia, 2025. https://doi.org/10.21175/rad.abstr.book.2025.34.1.

Pełny tekst źródła
Streszczenie:
Low-Voltage Differential Signaling (LVDS) receivers are widely used in high-speed serial links in several environments with radiation, including nuclear and high-energy physics experiments, spacecraft and satellites, and medical physics. In this work, we studied Total Ionizing Dose (TID) effects induced by 60Co gamma rays on LVDS receivers (part number DS90LV048A, from Texas Instruments) exposed to a high dose of 15.4 kGy at a dose rate of 364 Gy/h. TID tests have been performed at the CERN CC60 facility, that hosts a ~ 3 TBq 60Co radioactive source. Radiation effects were studied using both c
Style APA, Harvard, Vancouver, ISO itp.
4

Koch, Christof. "The Membrane Equation." In Biophysics of Computation. Oxford University Press, 1998. http://dx.doi.org/10.1093/oso/9780195104912.003.0007.

Pełny tekst źródła
Streszczenie:
Any physical or biophysical mechanism instantiating an information processing system that needs to survive in the real world must obey several constraints: (1) it must operate at high speeds, (2) it must have a rich repertoire of computational primitives, with the ability to implement a variety of linear and nonlinear, high-gain, operations, and (3) it must interface with the physical world—in the sense of being able to represent sensory input patterns accurately and translate the result of the computations into action, that is motor output (Keyes, 1985). The membrane potential is the one phys
Style APA, Harvard, Vancouver, ISO itp.
5

Yoon, Jun-Sik, Jinsu Jeong, Seunghwan Lee, Junjong Lee, and Rock-Hyun Baek. "Gate-All-Around FETs: Nanowire and Nanosheet Structure." In Nanowires - Recent Progress [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.94060.

Pełny tekst źródła
Streszczenie:
DC/AC performances of 3-nm-node gate-all-around (GAA) FETs having different widths and the number of channels (Nch) from 1 to 5 were investigated thoroughly using fully-calibrated TCAD. There are two types of GAAFETs: nanowire (NW) FETs having the same width (WNW) and thickness of the channels, and nanosheet (NS) FETs having wide width (WNS) but the fixed thickness of the channels as 5 nm. Compared to FinFETs, GAAFETs can maintain good short channel characteristics as the WNW is smaller than 9 nm but irrespective of the WNS. DC performances of the GAAFETs improve as the Nch increases but at de
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Resistance- Capacitance (RC)"

1

Videm, Ketil. "Experience with Galvanostatic Pulse Technique and Other Methods to Assess Rebar Corrosion." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97279.

Pełny tekst źródła
Streszczenie:
Abstract Electrochemical experiments have been carried out in Ca(OH)2 solutions, in mortar slabs with and without chloride additions and on reinforcement bars at a large bridge at the coast. The study is mainly focused on galvanostatic pulse experiments with monitoring of potential as a function of time. Only in an initial period the electrodes behaved in agreement with an equivalent circuit with a resistor and a capacitor in parallel. Modelling with two RC-links in series gave good fit with the observations. However, this type of modelling leads to uncertainty about which of the RC-links are
Style APA, Harvard, Vancouver, ISO itp.
2

Zhang, Peng, Jinfu Ma, Zhenjun Liu, and Chunyan Ye. "Study on AC Corrosion on Cathodically Protected Pipeline of X80 Steel." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-3939.

Pełny tekst źródła
Streszczenie:
Abstract Alternating current (AC) induced-corrosion on cathodically protected pipeline of X80 steel was studied by electrochemical impedance spectra (EIS). Experiments show that: EIS curves contain two time constants which represent high-frequency capacitance arc and low-frequency inductive loop, respectively. The equivalent circuit LR (RQ) fitting data show that the AC interference can cause the interface electric double layer between the X80 specimens and simulated soil electrolyte solution instability and its capacitance decreases, thus exacerbate the extent of corrosion. Under the CP volta
Style APA, Harvard, Vancouver, ISO itp.
3

Nag, Dhiman, Weiming Yao, Jos J. G. M. van der Tol, and Kevin A. Williams. "Investigating RC and Transit Time Limited Bandwidth of Integrated Balanced Detectors through an Equivalent Circuit Model." In Bragg Gratings, Photosensitivity and Poling in Glass Waveguides and Materials. Optica Publishing Group, 2022. http://dx.doi.org/10.1364/bgppm.2022.jtu2a.40.

Pełny tekst źródła
Streszczenie:
RC and transit time limited bandwidth of balanced detector is investigated through an equivalent circuit model. While series resistance is not a critical parameter, junction capacitance and load impedance play major roles in resulting bandwidth.
Style APA, Harvard, Vancouver, ISO itp.
4

Sathyamurthy, Prabhu, Manoj Nagulapally, and Rajesh Nair. "Development of Compact Models for Electronics Cooling: Using the Multigrid Operator to Generate Reduced Order Description of Devices." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42372.

Pełny tekst źródła
Streszczenie:
The need for compact models for ICs is a well-recognized problem in electronics cooling simulations of systems containing multiple PCBs and many devices per board. The disparate length scales inherent in the problem and the necessity of resolving these size scales renders the computational problem intractable. Many resistance-capacitance (RC) network compact models have been proposed in the literature. We present a methodology to automatically construct both the topology and characteristics of the reduced-order or compact models of devices (primarily Integrated Circuit (IC) packages) for use i
Style APA, Harvard, Vancouver, ISO itp.
5

Ogunsola, Oluwaseyi T., and Li Song. "Review and Evaluation of Using R-C Thermal Modeling of Cooling Load Prediction for HVAC System Control Purpose." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86988.

Pełny tekst źródła
Streszczenie:
Heating and cooling loads which are compensated by heating, ventilation, and air-conditioning (HVAC) systems, are the main reason for energy uses in buildings. Energy utilized by HVAC system accounts for two-thirds of a building’s total energy consumption. Excessive energy is consumed when HVAC systems fail to operate as intended. This is often due to several factors such as inappropriate monitoring and control strategy, lack of understanding of the dynamics of thermal loads, and system complexity. Amidst several models, estimation of cooling load using Resistance Capacitance (RC) models have
Style APA, Harvard, Vancouver, ISO itp.
6

Li, Mengfei, Zhaoping Xu, and Liang Liu. "Design of a Wide-Input Single-Phase Full-Bridge Power Converter for a Free-Piston Engine." In Automotive Technical Papers. SAE International, 2025. https://doi.org/10.4271/2025-01-5054.

Pełny tekst źródła
Streszczenie:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;Free-piston engines are new and efficient energy conversion devices that eliminate mechanical crankshafts. A wide-input power converter was needed as an electronic crankshaft for a free-piston engine to achieve efficient power generation control. A 20 kW single-phase full-bridge power converter that can operate over a wide-input voltage range was proposed in this paper to solve this problem. A current controller was designed by discussing the current flow of the power converters in four working modes, including forward e
Style APA, Harvard, Vancouver, ISO itp.
7

Koosha, Rasool, and Fatemeh Shahsavari. "A Performance Comprehension of Various Numerical Estimators for Variance-Based Sensitivity Analysis in Building Energy Simulations." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-98490.

Pełny tekst źródła
Streszczenie:
Abstract In the building energy performance simulation, the uncertainty analysis (UA) couples to the sensitivity analysis (SA) to handle ever-existing uncertainties; induced by the sources of uncertainty including random occupants behavior and degradation of building materials over time. As a building simulation tool reaches to a high level of complexity, it becomes more challenging for the sensitivity analysis to deliver reliable outputs; thus the accuracy of the SA results substantially depends upon the number of sample sets or the type of analysis performed. This paper describes a variance-
Style APA, Harvard, Vancouver, ISO itp.
8

Ns, Farhan Ahamed Hameed, Shubham Gupta, and Kaushal Jha. "Equivalent Circuit Modeling of Sodium-Ion Batteries Incorporating Temperature Effects: A Comprehensive Investigation." In 11th SAEINDIA International Mobility Conference (SIIMC 2024). SAE International, 2024. https://doi.org/10.4271/2024-28-0225.

Pełny tekst źródła
Streszczenie:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;The transition from Internal Combustion Engine (ICE) Vehicles to Electric Vehicles (EVs) has catalyzed significant advancements in battery technology, prioritizing safer and more reliable energy storage solutions. Although Lithium Iron Phosphate (LFP) batteries are recognized for their safety, they rely on critical and market-volatile elements such as copper, lithium, and graphite. To address these challenges, sodium-ion batteries (SIBs) have emerged as sustainable alternatives that are particularly suited for low-speed
Style APA, Harvard, Vancouver, ISO itp.
9

Sayed, Khairy, Mazen Abdel-Salam, Mahmoud Ahmed, and Adel A. Ahmed. "Electro-Thermal Modeling of Solar Photovoltaic Arrays." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62541.

Pełny tekst źródła
Streszczenie:
The objective of the present work is to develop a dynamic electro-thermal model for photovoltaic cells to optimize both electrical and thermal performance of such systems. The thermal model is developed by generating the equivalent RC network (resistance-capacitance) parameters. Then, the thermal model is combined with electrical model and implemented by PSIM simulation program to evaluate performance parameters for any predefined operating condition. The electro-thermal model predicts instantaneous temperature of photovoltaic device at the actual circuit working conditions. Consequently, the
Style APA, Harvard, Vancouver, ISO itp.
10

Wu, Chia-Che, Cheng-Chun Lee, G. Z. Cao, and I. Y. Shen. "Effects of Corner Frequency on Bandwidth and Resonance Amplitude in Designing PZT Thin-Film Actuators: An Experimental Demonstration." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79102.

Pełny tekst źródła
Streszczenie:
In the last decade, Lead Zirconate Titanate Oxide (PZT) thin-film actuators have received increasing attention because of their high frequency bandwidth, large actuation strength, fast response, and small size. The PZT film thickness is usually less than several microns as opposed to hundreds of microns for bulk PZT patches that are commercially available. As a result, PZT thin-film actuators pose unique vibration issues that do not appear in actuators with bulk PZT. Two major issues affecting actuator performance are the frequency bandwidth and the resonance amplitude. As an electromechanical
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Resistance- Capacitance (RC)"

1

Huatian, Xu, and Bi Wuxi. PR469-183600-R01 The Influence of Solid State Decouplers on Pipeline CP Surveys. Pipeline Research Council International, Inc. (PRCI), 2020. http://dx.doi.org/10.55274/r0011935.

Pełny tekst źródła
Streszczenie:
The objectives of this research are to figure out how solid state decouplers (SSDs) influence the surveys related to pipeline cathodic protection (CP) and provide corresponding field guidelines on how to mitigate the adverse effects of SSDs. Firstly, by combining the classical capacitor discharge theory and the equivalent circuit of the CP system, a four-stage physical model is built to explain how SSDs' discharge current pulse influences the CP related readings. From the physical model, we can obtain the following conclusions: (1) The driving force behind the discharging of an SSD's capacitor
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Resistance- Capacitance (RC)” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii