Zaloguj się

Gotowe bibliografie tematyczne / SAW / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: SAW.

Artykuły w czasopismach na temat „SAW”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 25 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „SAW”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Saiki, O., M. Kawamoto, M. Fukuzumi, M. Kanou, and S. Utsumi. "Staphylococcus aureus Wood 46 strain activates human B cells without affecting DNA synthesis or tyrosine phosphorylation." Journal of Immunology 150, no. 8 (1993): 3224–29. http://dx.doi.org/10.4049/jimmunol.150.8.3224.

Pełny tekst źródła

Streszczenie:

Abstract Induction of Ig secretion in human tonsilar B cell by protein A-deficient Staphylococcus aureus WOOD 46 strain (SAW) was examined. SAW induced as much Ig secretion as protein A-rich S. aureus Cowan I strain (SAC) when IL-2 was present in the culture. Activated and resting B cells are separated by Percoll gradient to determine whether SAW stimulates either resting or activated B cells. In resting B cells, SAW plus IL-2 induced IgM secretion significantly, but neither IL-2 nor SAW alone induced IgM secretion. In activated B cells, however, IL-2 induced IgM secretion by itself and SAW pl

Style APA, Harvard, Vancouver, ISO itp.

2

Dawadi, Krishna Bahadur, Mahesh Bhattarai, and Puspa Lal Homagai. "Adsorptive Removal of Methyl Red from Aqueous Solution using Charred and Xanthated Sal (Shorea robusta) Sawdust." Amrit Research Journal 1, no. 1 (2020): 37–44. http://dx.doi.org/10.3126/arj.v1i1.32451.

Pełny tekst źródła

Streszczenie:

Adsorptive removal of methyl red (MR) from aqueous solution onto chemically modified Charred Sal (Shorea robusta) Saw-Dust (CSSD) and Xanthated Sal Saw-Dust (XSSD) has been investigated. The surface modification is characterized by Fourier transformed infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and elemental Analysis. Different parameters are studied such as contact time, optimum pH, and initial ion concentration. Maximum dye removal is observed at pH 4 for charred and xanthated Sal saw dust. The dye can be quantitatively removed onto the surface of these adsorbent. At a

Style APA, Harvard, Vancouver, ISO itp.

3

Sumarjono, Erry, Agung Dwi Sutrisno, and Denanson Ornansah Sinaga. "DETERMINATION OF THE QUALITY WATER SANGON RIVER THAT EFFECTED BY AMALGAMATION GOLD ORE PROCESSING IN KALIREJO KOKAP DAERAH ISTIMEWA YOGYAKARTA." KURVATEK 7, no. 2 (2022): 17–24. http://dx.doi.org/10.33579/krvtk.v7i2.3758.

Pełny tekst źródła

Streszczenie:

Amalgamasi adalah salah satu metode yang dapat digunakan untuk ekstraksi emas dengan menggunakan merkuri. Merkuri merupakan logam berat yang sangat berbahaya bagi kesehatan manusia. Pembuangan limbah pengolahan bijih emas dengan menggunakan metode amalgamasi yang masih mengandung merkuri ke sungai dapat mempengaruhi kualitas air sungai tersebut. Penelitian yang dilakukan di Sungai Sangon untuk mengukur kandungan merkuri di dalam air sungai tersebut dan menentukan status mutu air sungai tersebut berdasarkan baku mutu air dalam Peraturan Pemerintah No. 82 Tahun 2001. Pengambilan sampel dilakukan

Style APA, Harvard, Vancouver, ISO itp.

4

Xun, Pengwei, Chuanpeng Zhou, Xiaolin Huang, et al. "Effects of Dietary Sodium Acetate on Growth Performance, Fillet Quality, Plasma Biochemistry, and Immune Function of Juvenile Golden Pompano (Trachinotus ovatus)." Aquaculture Nutrition 2022 (February 9, 2022): 1–11. http://dx.doi.org/10.1155/2022/9074549.

Pełny tekst źródła

Streszczenie:

Six isonitrongenous and isolipidic diets were formulated to feed 360 fish (mean initial body weight: 6.06 ± 0.02 g) with graded levels of sodium acetate (SA1 (0), SA2 (250 mg/kg), SA3 (500 mg/kg), SA4 (1000 mg/kg), SA5 (2000 mg/kg), and SA6 (4000 mg/kg)) for 8 weeks. The results revealed that weight gain rate, specific growth rate, and feed intake of golden pompano were significantly increased in SA3 and SA4 treatments ( p < 0.05 ). Dietary SA level significantly improved lipid contents and gumminess of muscle ( p < 0.05 ). Supplement levels of dietary SA significantly influenced plasma

Style APA, Harvard, Vancouver, ISO itp.

5

Mare, Shrirang, Reza Rawassizadeh, Ronald Peterson, and David Kotz. "SAW." Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies 2, no. 3 (2018): 1–29. http://dx.doi.org/10.1145/3264935.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Carter, Kyle, Adam Foltzer, Joe Hendrix, Brian Huffman, and Aaron Tomb. "SAW." ACM SIGAda Ada Letters 33, no. 3 (2013): 15–18. http://dx.doi.org/10.1145/2658982.2527277.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Thorpe, Jocelyn. "Wetland Revisited." UnderCurrents: Journal of Critical Environmental Studies 16 (January 1, 2007): 24. http://dx.doi.org/10.25071/2292-4736/40358.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Hude, M. Darwis, Ahsin Sakho Muhammad, and Sasa Sunarsa. "Penelusuran Kualitas dan Kuantitas Sanad Qiraah Sab’ah: Kajian Takhrij Sanad Qiraah Sab’ah." MISYKAT: Jurnal Ilmu-ilmu Al-Quran, Hadist, Syari'ah dan Tarbiyah 5, no. 1 (2020): 1. http://dx.doi.org/10.33511/misykat.v5n1.1-22.

Pełny tekst źródła

Streszczenie:

Qiraah sab‟ah telah disepakati ke-mutawatir-annya oleh jumhur ulama. Namun ada ulama yang berpendapat bahwa sanad qiraah sab‟ah dari para imam qiraah sab‟ah kepada Rasulullah Saw, tidak mencapai derajat mutawatir, melainkan hanya masyhur, yang berkualifikasi sahih dan maqbul. Artikel ini ini bertujuan untuk mengetahui kualitas dan kuantitas sanad qiraah sab‟ah berdasarkan kajian takhrij hadis. Pendekatannya menggunakan pendekatan kualitatif dengan metode library research. Analisis datanya menggunakan teori takhrij hadis. Hasilnya menunjukkan bahwa dalam perspektif Ilmu Hadis, sanad qiraah sab‟

Style APA, Harvard, Vancouver, ISO itp.

9

Vekakis, Matt. "Bench Saw." Appalachian Review 49, no. 1 (2021): 56–57. http://dx.doi.org/10.1353/aph.2021.0009.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Milosz, Czeslaw, and Robert Hass. "I Saw." Grand Street, no. 66 (1998): 76. http://dx.doi.org/10.2307/25008391.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Buff, W. "SAW sensors." Sensors and Actuators A: Physical 30, no. 1-2 (1992): 117–21. http://dx.doi.org/10.1016/0924-4247(92)80205-h.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Pittman, Eddie. "Saw Time." Critical Perspectives on Accounting 18, no. 6 (2007): 670. http://dx.doi.org/10.1016/j.cpa.2006.03.003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Bohannan, Paul. "Old Saw." Anthropology News 31, no. 1 (1990): 3. http://dx.doi.org/10.1111/j.1556-3502.1990.tb01514.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Abdoulaye, Ghalapoum. "I Saw." Index on Censorship 31, no. 3 (2002): 79. http://dx.doi.org/10.1080/03064220208537092.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

D'Amico, A., and E. Verona. "Saw sensors." Sensors and Actuators 17, no. 1-2 (1989): 55–66. http://dx.doi.org/10.1016/0250-6874(89)80064-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Adler, E. L. "SAW and pseudo-SAW properties using matrix methods." IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 41, no. 5 (1994): 699–705. http://dx.doi.org/10.1109/58.308506.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Adler, E. L. "SAW and pseudo-SAW properties using matrix methods." IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 41, no. 6 (1994): 876–82. http://dx.doi.org/10.1109/58.330269.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Wang, Xiao Ye, Yan Li, and Shu Juan Li. "Study on the Impact of the Cutting Process of Wire Saw on SiC Wafers." Applied Mechanics and Materials 120 (October 2011): 593–97. http://dx.doi.org/10.4028/www.scientific.net/amm.120.593.

Pełny tekst źródła

Streszczenie:

Based on reciprocating electroplated diamond wire saw cutting SiC wafers experiments, the influences law of wire saw diameter, wire saw quality, wire saw speed, wire saw wear and cutting fluid on cutting rate and wafers surface quality was studied. The results indicate that cutting rate increase with wire saw diameter and wire saw speed increase, and decreases with wire saw wear; wafers surface roughness increase with wire saw diameter increase and wire saw wear and a slightly lower with wire saw speed increase; TTV (total thickness variation) is risen slightly with wire saw diameter increase;

Style APA, Harvard, Vancouver, ISO itp.

19

Oliveira, Natália, Fábio Rodrigues, Jessica Souza, Leonardo Botega, and Regina Araújo. "Interface de Usuários para o Enriquecimento da Consciência Situacional em Sistemas de Gerenciamento de Emergência." Journal on Advances in Theoretical and Applied Informatics 1, no. 1 (2015): 60. http://dx.doi.org/10.26729/jadi.v1i1.1054.

Pełny tekst źródła

Streszczenie:

Situational Awareness (SAW) is a concept widely used in areas that require critical decision making, such as in the field of emergency management. SAW is related to the level of perception and understanding that an individual has about real events occurring in complex scenarios, which must be managed by critical systems. Such critical systems require specialized user interfaces (UI) to give operators a dynamic understanding of what is happening in the environment. A challenging issue in the design of SAW-oriented interfaces is to determine how the human-computer interface process can be constr

Style APA, Harvard, Vancouver, ISO itp.

20

Zhang, Ming Song, Pu Xian Zhu, and Lian Bing Cheng. "Composite Damping Circular Saw Blade Vibration Characteristics Analysis." Applied Mechanics and Materials 670-671 (October 2014): 1106–11. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.1106.

Pełny tekst źródła

Streszczenie:

Applying the method of finite element to research the composite damping vibration reduction effect of circular saw blade. Based on the structure of composite damping circular saw blade, contrast a composite saw blade and ordinary saw blade, to design and compare their vibration characteristics. Through research the vibration characteristics on the three kinds of saw blades found that the each order natural frequency of composite damping saw blade and composite saw blade is smaller than the corresponding order natural frequency of ordinary saw blade, and the each order natural frequency of comp

Style APA, Harvard, Vancouver, ISO itp.

21

Wang, Xiao Ling, Zhong Jun Yin, and Yan Lin Li. "The Stress Analysis of Different Circular Saw Structures during Cutting." Advanced Materials Research 228-229 (April 2011): 471–76. http://dx.doi.org/10.4028/www.scientific.net/amr.228-229.471.

Pełny tekst źródła

Streszczenie:

In this paper, we analyze the stresses around the saw teeth of differently designed circular saw structures. We select a set of critical points around the saw tooth, then we calculate the equivalent stresses of these points and the maximum or minimum stresses of the different saws under different loads and rotational speeds. The saw structure factors that we examine include the diameter of circular saw blades, the depth of the circular saw, the saw tooth rake angel, the saw tooth height and the saw tooth shape. Based on our analytical results, we propose an effective approach to reduce the str

Style APA, Harvard, Vancouver, ISO itp.

22

Tribhuwan, Singh, and Ali Shahzad. "SEE SAW BASED REGENERATIVE POWER SYSTEM." International Journal of Engineering Sciences & Research Technology 5, no. 2 (2016): 676–80. https://doi.org/10.5281/zenodo.46487.

Pełny tekst źródła

Streszczenie:

Research related to electrical vehicles is gaining importance due to the energy crisis. Using regenerative braking when braking, improves the efficiency of an electric vehicle as it recovers energy that could go to waste if mechanical brakes were used. A novel regenerative braking system for neighborhood electric vehicles was designed, prototyped and tested. The proposed system utilizes a seesaw system to capture energy whereas the conventional systems regenerate to the batteries. The user has direct control over the amount of current regenerated and hence the amount of negative torque applied

Style APA, Harvard, Vancouver, ISO itp.

23

Egamberdiev, F., K. Jumaniyazov, I. Abbazov, and H. Yodgorova. "Theoretical study of the effect of improving cleaning efficiency and fiber quality from a double-drum fiber cleaner." IOP Conference Series: Earth and Environmental Science 1142, no. 1 (2023): 012088. http://dx.doi.org/10.1088/1755-1315/1142/1/012088.

Pełny tekst źródła

Streszczenie:

Abstract This paper studies the effect of the arrangement of saw cylinders in a double-drum fiber cleaner in a checkerboard pattern on the cleaning efficiency and fiber quality. That is, as a result of the experimental work on the manufacture of a double-drum fiber cleaner, the distance between the saw axes in the saw cylinder of the cleaner is 7 mm, and the saw axes in the second saw cylinder are in line with the saw axis in the first saw cylinder, so the fiber cleaned from the first saw cylinder completely blocked by saws in the second cylinder. It has been studied that the fibers not proces

Style APA, Harvard, Vancouver, ISO itp.

24

Nomura, T., T. Yasuda, S. Shiokawa, and T. Moriizumi. "Precise measurement of SAW velocity using SAW delay line." IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 35, no. 6 (1988): 646–51. http://dx.doi.org/10.1109/58.9319.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Sam, Yen Yen, Halijah Ibrahim, and Leng Guan Saw. "Four new species of Scaphochlamys (Zingiberaceae) from Peninsular Malaysia." Phytotaxa 221, no. 1 (2015): 21–34. https://doi.org/10.11646/phytotaxa.221.1.2.

Pełny tekst źródła

Streszczenie:

Sam, Yen Yen, Ibrahim, Halijah, Saw, Leng Guan (2015): Four new species of Scaphochlamys (Zingiberaceae) from Peninsular Malaysia. Phytotaxa 221 (1): 21-34, DOI: 10.11646/phytotaxa.221.1.2, URL: http://dx.doi.org/10.11646/phytotaxa.221.1.2

Style APA, Harvard, Vancouver, ISO itp.

26

Pylypchuk, M. I., V. V. Shostak, V. I. Taras, S. A. Salovskyy, and M. V. Ditkovskyy. "IMPROVED DESIGN OF CIRCULAR SAW WITH COMBINED GEAR CROWN FOR LONGITUDINAL SAWING OF WOOD." Forestry, Forest, Paper and Woodworking Industry 45 (December 30, 2019): 5–12. http://dx.doi.org/10.36930/42194501.

Pełny tekst źródła

Streszczenie:

A new design of circular saw with hard alloy plates has been developed, its gear crown is made in two sizes of straight pointed teeth FZ1 / FZ2, alternating through one: one (slit) has a thickness equal to the thickness of the saw body and the height of the other (scraper) is less than 1.5 mm and has a thickness equal to the width of the saw. The influence of the structural parameters of the saw with combined teeth FZ1 / FZ2 on the accuracy of longitudinal sawing of wood is explained by the special design of the saw, which is divided into two stages: initially, cut tooth FZ1 cuts the middle pa

Style APA, Harvard, Vancouver, ISO itp.

27

Yao, Chun Yan, Zong Hua Xu, Wei Zhang, Qiao Fang Zhang, and Wei Peng. "Experimental Study on Temperature during Wire Saw Slicing." Applied Mechanics and Materials 481 (December 2013): 153–57. http://dx.doi.org/10.4028/www.scientific.net/amm.481.153.

Pełny tekst źródła

Streszczenie:

Heat generated during wire saw slicing can cause silicon temperature raise and make silicon wafer warpage, especially for larger silicon wafers. In order to study the wire saw effect on silicon temperature during slicing process, three kinds of wire saw, mainly semi-fixed abrasive wire saw and traditional wire saw, are applied for slicing silicon ingot. In this paper, the thermocouple is used to measure the temperature of the silicon during wire saw slicing. The experiment results show that the temperature of the silicon increases along with the wire saw working direction and reaches maximum v

Style APA, Harvard, Vancouver, ISO itp.

28

Firmansyah, Muhammad Yusuf, Alif Catur Murti, and Ratih Nindyasari. "ANALISIS PERBANDINGAN METODE AHP (ANALYTICAL HIERARCHY PROCESS) DAN SAW (SIMPLE ADDITIVE WEIGHT) DALAM PEMILIHAN TEMPAT USAHA." Jurnal Dialektika Informatika (Detika) 3, no. 2 (2023): 71–78. http://dx.doi.org/10.24176/detika.v3i2.10455.

Pełny tekst źródła

Streszczenie:

Pemilihan tempat usaha adalah keputusan krusial yang dapat mempengaruhi kesuksesan bisnis. Bisnis akan lebih dikenal dan dilihat oleh pelanggan jika berada di lokasi yang tepat dan mudah dijangkau. Dalam penelitian ini, tiga metode perankingan yaitu Analytic Hierarchy Process (AHP), Simple Additive Weighting (SAW), dan Hybrid AHP-SAW digunakan untuk membandingkan alternatif lokasi berdasarkan kriteria tertentu. Hasil perankingan menunjukkan bahwa meskipun terdapat perbedaan dalam peringkat yang diberikan oleh masing-masing metode, terdapat konsistensi dalam menentukan alternatif terbaik dan te

Style APA, Harvard, Vancouver, ISO itp.

29

Kaczmarek, Anna, Kazimierz Orłowski, and Lubomir Javorek. "The Effect of Circular Saw Blade Clamping Diameter on its Resonant Frequencies." Applied Mechanics and Materials 838 (June 2016): 18–28. http://dx.doi.org/10.4028/www.scientific.net/amm.838.18.

Pełny tekst źródła

Streszczenie:

In this paper results of comparison of characteristic resonant frequencies of circular saw blades as a function of the saw clamping diameter from the impact test are presented. Obtained results revealed that proportionally with the increase of the saw clamping diameter also the dynamical stiffness of the saw blade increased. As a consequence of that the resonant frequencies of the saw blade move to higher values. Moreover, with the increase of the saw blade clamping diameter for higher frequencies of forcing vibrations of the saw blade the amplitude of vibration are expected to be decreased.

Style APA, Harvard, Vancouver, ISO itp.

30

Zeng, Yujia, Rui Yuan, Hao Fu, Zhangliang Xu, and Song Wei. "Foodborne pathogen detection using surface acoustic wave biosensors: a review." RSC Advances 14, no. 50 (2024): 37087–103. http://dx.doi.org/10.1039/d4ra06697a.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Al-Sumaidaee, Saif Alden K. Mohammad, and Ali Mazin Abdul-Munaim. "Performance Evaluation of Two Date Palm Frond Cutting Saws." IOP Conference Series: Earth and Environmental Science 1214, no. 1 (2023): 012050. http://dx.doi.org/10.1088/1755-1315/1214/1/012050.

Pełny tekst źródła

Streszczenie:

Abstract Traditional tree management is laborious and costly, thus this work aimed to study the performance of two different types of frond cutting saws (reciprocating saw and vibrating saw) and examine the two saws on five date palm varieties. Four parameters were examined, including cutting time for a single frond, the power needed for cutting a single frond, frond cutting productivity expressed as tree/h, and vibration conveyed to the worker’s hand. A field experiment was designed according to the nested randomized complete block design, including five date palm varieties as the main plot a

Style APA, Harvard, Vancouver, ISO itp.

32

Pouya, C., K. Hoggard, S. H. Gossage, H. R. Peter, T. Poole, and G. R. Nash. "Frequency dependence of surface acoustic wave swimming." Journal of The Royal Society Interface 16, no. 155 (2019): 20190113. http://dx.doi.org/10.1098/rsif.2019.0113.

Pełny tekst źródła

Streszczenie:

Surface acoustic waves (SAWs) are elastic waves that can be excited directly on the surface of piezoelectric crystals using a transducer, leading to their exploitation for numerous technological applications, including for example microfluidics. Recently, the concept of SAW streaming, which underpins SAW microfluidics, was extended to make the first experimental demonstration of ‘SAW swimming’, where instead of moving water droplets on the surface of a device, SAWs are used as a propulsion mechanism. Using theoretical analysis and experiments, we show that the SAW swimming force can be control

Style APA, Harvard, Vancouver, ISO itp.

33

Melekhov, V. I., I. I. Solovev, T. V. Tyurikova, and N. V. Ponomareva. "Improving the Stability of Wood-Cutting Saws by Thermoplastic Action on the Distribution of Residual Stresses in the Blade." Lesnoy Zhurnal (Forestry Journal), no. 6 (December 10, 2020): 172–81. http://dx.doi.org/10.37482/0536-1036-2020-6-172-181.

Pełny tekst źródła

Streszczenie:

The saw stability in operation defines the ability of the saw blade to resist the forces acting on it in the plane of greatest rigidity. The saw can work reliably only in case of maintaining stable balance, which is achieved through the creation of normalized residual stresses in certain zones of the saw blade by different methods. The stresses balance the forces of external influences. Compressive stresses are created in the central part of the blade to make the circular saw operational. These stresses compensate the forces of centrifugal acceleration, temperature heating of individual zones

Style APA, Harvard, Vancouver, ISO itp.

34

Li, Bo, and Yuan An. "The Flattening and Stiffening Effect of Centrifugal Stress on Circular Saw Blades in Different States." Forest Products Journal 72, no. 2 (2022): 92–97. http://dx.doi.org/10.13073/fpj-d-21-00075.

Pełny tekst źródła

Streszczenie:

Abstract Circular saw blades have many states, before and during the sawing process, depending on the different residual stresses and flatness of the circular saw blades. Based on the different states of circular saw blades, the effect of rotating centrifugal stress on the dynamic stability of circular saw blades is different, mainly reflected in flattening and stiffening effects. In this article, three representative states of circular saw blades were chosen and studied. The finite element method was chosen to simulate the deformation behavior of circular saw blades in the three states. The f

Style APA, Harvard, Vancouver, ISO itp.

35

Wang, Zhiwen, Qingliang Zeng, Zhenguo Lu, Lirong Wan, Xin Zhang, and Zhihai Liu. "Investigation of Cutting Performance of a Circular Saw Blade Based on ANSYS/LS-DYNA." Strojniški vestnik – Journal of Mechanical Engineering 67, no. 12 (2021): 649–65. http://dx.doi.org/10.5545/sv-jme.2021.7322.

Pełny tekst źródła

Streszczenie:

The circular saw blade is widely applied in rock processing; its cutting performance significantly impacts rock processing. Therefore, the numerical simulation model of rock cutting with the flexible circular saw blade has been established to investigate the effects of cutting parameters on the stress and cutting force of circular saw blade, and the damage and stress of rock in the circular saw blade cutting into rock vertically at constant feed speed and rotation speed. The research results indicate that the stress of the saw blade and rock rises with the increase of feed speed and rotation s

Style APA, Harvard, Vancouver, ISO itp.

36

Melekhov, Vladimir I., Ivan I. Solovev, and Nataliya G. Ponomareva. "Formation of Coaxial Fields of Residual Stresses in the Circular Saw Blade." Lesnoy Zhurnal (Forestry Journal), no. 2 (April 1, 2022): 170–77. http://dx.doi.org/10.37482/0536-1036-2022-2-170-177.

Pełny tekst źródła

Streszczenie:

The working tool of machines with circular cutting units is a circular saw, the condition of which largely determines the quality of material processing. Circular saw blades in the process of operation are subjected to a complex effect of force and temperature factors that cause elongation and deformation of the saw blade, and the occurrence of internal stresses that take it out of the flat form of elastic balance and reduce the tool’s performance. The ability of saws to resist these factors is determined by the rigidity and stability of the saw blade. It is customary to consider a circular sa

Style APA, Harvard, Vancouver, ISO itp.

37

Abu Bakar, Bhasah, Yuslina Mohamed, Nurhasma Muhamad Saad, Sulaiman Ismail, and Mesbahul Hoque. "Didikan Cinta Rasulullah SAW dalam Kalangan Pelajar Sekolah Menengah." Al-Azkiyaa - Jurnal Antarabangsa Bahasa dan Pendidikan 1, no. 1 (2022): 101–14. http://dx.doi.org/10.33102/alazkiyaa.v1i1.13.

Pełny tekst źródła

Streszczenie:

Cinta Rasulullah SAW membawa maksud cuba mengemulasi Rasulullah SAW dari semua aspek kehidupannya. Natijahnya akan membentuk seorang insan yang benar-benar menghayati Islam dalam kehidupan sehariannya. Dengan demikian, pelajar-pelajar sekolah haruslah dididik untuk menjadikan Islam sebagai cara hidup mereka melalui Cinta Rasulullah SAW dengan mengenali pemimpin ikon islam agar dapat menjiwai dalam kehidupan seharian. Untuk tujuan ini seramai 2407 pelajar dari pelbagai aliran sekolah menengah di Malaysia telah dibuat kajian tentang cinta mereka terhadap Rasulullah SAW. Pengukuran cinta mereka t

Style APA, Harvard, Vancouver, ISO itp.

38

Ramakrishnan, N., Harshal B. Nemade, and Roy Paily Palathinkal. "Investigation on Resonance Effects of Closely Resonating Nano-Pillars Attached to SAW Resonator." Advanced Materials Research 403-408 (November 2011): 1183–87. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.1183.

Pełny tekst źródła

Streszczenie:

Surface acoustic wave (SAW) sensors form an important class of micro sensors in the microelecto mechanical systems (MEMS) family. Mass loading effect of a sensing medium is one of the prime sensing principles in SAW sensors. Recently we reported mass loading effect of high aspect ratio nano-pillars attached to a SAW resonator. We observed increase in resonance frequency of the SAW resonator in addition to the general mass loading characteristics. We concluded that when the resonance frequency of the pillar is equal to the SAW resonator frequency, the resonance frequency shift caused by mass lo

Style APA, Harvard, Vancouver, ISO itp.

39

Fekiač, Jozef, Ján Svoreň, Jozef Gáborík, and Miroslav Němec. "Reducing the Energy Consumption of Circular Saws in the Cutting Process of Plywood." Coatings 12, no. 1 (2022): 55. http://dx.doi.org/10.3390/coatings12010055.

Pełny tekst źródła

Streszczenie:

Cutting, as the most widely used machining process, is applied in both primary and secondary wood processing. Optimum cutting conditions that result in the high quality of the machined surface and low energy consumption are crucial for wood processing. The effects of the feed speed, cutting speed and average chip thickness on the energy consumption and surface temperature of a circular saw blade during the cutting process of two types of plywood with a thickness of h = 14 mm is described in this paper. In experimental measurements, two circular saw blades with cutting tungsten carbide inserts

Style APA, Harvard, Vancouver, ISO itp.

40

Sianturi, Reny, and Astaman Amir. "The Perspective of Wendu Coastal Fishermen’s on The Presence of Sawfish (Pristis spp.)." Agrikan Jurnal Agribisnis Perikanan 16, no. 1 (2023): 141–45. http://dx.doi.org/10.52046/agrikan.v16i1.1529.

Pełny tekst źródła

Streszczenie:

Indonesia is the world's largest producer and catcher of sharks and rays (Chondrichthyans class). Saw Stingrays (Pristis spp.) have full protection status. Anoxypristis cuspidata is a type of Saw Stingray which is predominantly caught as bycatch from nets and fishing gear by traditional fishermen operating around the waters of Merauke, Papua. One of the determinants of the success of saw stingray conservation is human resources which can be seen from their knowledge and perspective on the existence of saw stingrays. This study aims to determine the perspective of Wendu coastal fishermen on the

Style APA, Harvard, Vancouver, ISO itp.

41

Gylys, Beth. "I Saw You." Antioch Review 59, no. 3 (2001): 573. http://dx.doi.org/10.2307/4614200.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Nguyen, Vinh. "I Saw It." Amerasia Journal 23, no. 2 (1997): 167–70. http://dx.doi.org/10.17953/amer.23.2.l428n64132448581.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Mengiste, Maaza. "What We Saw." World Literature Today 88, no. 2 (2014): 52–53. http://dx.doi.org/10.1353/wlt.2014.0130.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Maaza Mengiste. "What We Saw." World Literature Today 88, no. 2 (2014): 52. http://dx.doi.org/10.7588/worllitetoda.88.2.0052.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Kramer, Sarah, Kaitlin M. Lewin, Allison S. Romano, and Brian P. Meier. "I Saw That." Social Psychology 51, no. 3 (2020): 141–48. http://dx.doi.org/10.1027/1864-9335/a000402.

Pełny tekst źródła

Streszczenie:

Abstract. The shooter bias effect reveals that individuals are quicker to “shoot” armed Black (vs. White) men and slower to “not shoot” unarmed Black (vs. White) men in a computer task. In three studies ( N = 386), we examined whether being observed would reduce this effect because of social desirability concerns. Participants completed a “shooting” task with or without a camera/live observer supposedly recording behavior. Cameras were strapped to participants’ heads (Studies 1a/1b) and pointed at them (Study 1b). In Study 2, a researcher observed participants complete the task while “filming”

Style APA, Harvard, Vancouver, ISO itp.

46

Hoekzema, G., M. Wieschhaus, S. Abercrombie, et al. "Sharpen the Saw!" Annals of Family Medicine 9, no. 2 (2011): 177–78. http://dx.doi.org/10.1370/afm.1247.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

TOMITA, K., and N. KAWAHARA. "The Threadwire Saw." Journal of Bone & Joint Surgery 78, no. 12 (1996): 1915–7. http://dx.doi.org/10.2106/00004623-199612000-00017.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

MORT, GRAHAM. "The saw mill." Critical Quarterly 29, no. 1 (1987): 33–36. http://dx.doi.org/10.1111/j.1467-8705.1987.tb00058.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

West, Katharine S. "She Saw Jesus." Journal of Christian Nursing 18, no. 1 (2001): 4–8. http://dx.doi.org/10.1097/00005217-200118010-00002.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Raach, Peter. "Saw belt roller." Journal of the Acoustical Society of America 90, no. 4 (1991): 2217. http://dx.doi.org/10.1121/1.401619.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!