Gotowe bibliografie tematyczne / Searls Manufacturing Co

Spis treści

  1. Artykuły w czasopismach
  2. Części książek
  3. Streszczenia konferencji

Gotowa bibliografia na temat „Searls Manufacturing Co”

Autor: Grafiati
Data publikacji: 27 lipca 2024
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Searls Manufacturing Co”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Searls Manufacturing Co"

1

Witt, C., and K. Strauss. "Lichtschnittvisualisierung der scherinduzierten Strömungsform kationischer Tensidlösungen in einer Searle-Geometrie." Chemie Ingenieur Technik 73, no. 8 (2001): 1038–41. http://dx.doi.org/10.1002/1522-2640(200108)73:8<1038::aid-cite1038>3.0.co;2-l.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kim, S. W., W. Namkung, and S. D. Kim. "Solid Recycle Characteristics of Loop-seals in a Circulating Fluidized Bed." Chemical Engineering & Technology 24, no. 8 (2001): 843–49. http://dx.doi.org/10.1002/1521-4125(200108)24:8<843::aid-ceat843>3.0.co;2-d.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Witt, C., and K. Strauß. "Light Sheet Visualization of the Shear-Induced Flow Pattern of Cationic Surfactant Solutions in a Searle Geometry." Chemical Engineering & Technology 25, no. 5 (2002): 488–91. http://dx.doi.org/10.1002/1521-4125(200205)25:5<488::aid-ceat488>3.0.co;2-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Nakano, Takanori, and Kazuhisa Sato. "Visualization of Surface Layer Defects in Solid Oxide Fuel Cell Using an Infrared Radiation Based on the Infrared Absorption Properties of CO2." ECS Meeting Abstracts MA2024-02, no. 64 (2024): 4320. https://doi.org/10.1149/ma2024-02644320mtgabs.

Pełny tekst źródła
Streszczenie:
Non-destructive testing methods for quality assurance are essential for the widespread use of all-solid-state electrochemical devices such as Solid Oxide Fuel cell (SOFC) and All-solid-state Lithium ion batteries (AS-LiB). Since these are laminates of ceramics from different materials, they can be subject to mechanical damage during operating and manufacturing. These damages can significantly reduce the electrochemical performance or durability. Therefore, it is important to detect these damages by rapid and non-destructive methods and to determine whether they should be repaired or discarded
Style APA, Harvard, Vancouver, ISO itp.
5

"Environmental challenges drive focus on metal valve seals." Sealing Technology 2023, no. 5 (2023). http://dx.doi.org/10.12968/s1350-4789(23)70038-x.

Pełny tekst źródła
Streszczenie:
Precision engineering company Cross Manufacturing Co reports that increasing emphasis on reduced maintenance, improved asset management and the elimination of fugitive emissions are amongst the main drivers behind the focus on metal valve seals.
Style APA, Harvard, Vancouver, ISO itp.
6

Li, Shijie, Ke Guo, Mingyin Kou, et al. "Towards Sustainable Solid‐State Aluminum‐ion Batteries: Multi‐Functional Conductive Graphite Cathode from CO2 Reduction." Advanced Functional Materials, April 7, 2025. https://doi.org/10.1002/adfm.202504468.

Pełny tekst źródła
Streszczenie:
AbstractThe dual pressures of escalating energy demands and environmental degradation necessitate transformative sustainable technologies. Herein, a molten salt electrochemical strategy is reported that directly converts CaCO3, generated through CO2 fixation, into two functionally distinct conductive carbon materials: highly conductive graphite (KCG) and hierarchically porous graphite (NCG), achieves through precise modulation of KCl‐CaCl2 and NaCl‐CaCl2 electrolytic environments. Structural analyses reveal KCG's enhances defect density (ID/IG ratio 0.89) and strong π–π interactions, whereas N
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Searls Manufacturing Co"

1

Yates, Luke. "Manufacturing a Movement: Platform Power at Airbnb." In Platform Politics. Policy Press, 2024. https://doi.org/10.1332/policypress/9781529236149.003.0005.

Pełny tekst źródła
Streszczenie:
This chapter discusses the most well-resourced example of platform power in the world to date, Airbnb Citizen. First it discusses the creation of the Airbnb Citizen –by asking the question of how prospective landlord-activists are selected, recruited and mobilised. Participants in Airbnb’s political campaigns are carefully curated, with commercial landlords on the platform excluded, apparently in order to present a more benign narrative of the company. Interviewees describe an extensive search for appropriate recruits, an intensive series of meetings and meet-ups, followed by increasingly poli
Style APA, Harvard, Vancouver, ISO itp.
2

Vragova, Elena Vladimirovna, Nurkul Abdilazizovich Murzakulov, and Mukhammadsadyk Makhamatrazhapovich Yslamov. "Solutions to a Complex of Environmental and Economic Problems by Small Biogas Plants in Households of the Republic of Kyrgyzstan." In Principles of the New Ecosystem Formation: Multicultural Space. Publishing house Sreda, 2022. http://dx.doi.org/10.31483/r-102660.

Pełny tekst źródła
Streszczenie:
Today, in the energy sector, a promising direction for the use of renewable energy sources. A variety of enterprises often have production waste that can be used as renewable secondary energy resources. The concept of lean manufacturing goes hand in hand with increased environmental sustainability. Reducing production waste to a minimum by recycling it increases the energy-saving potential of production, on the one hand, and the indicator of environmental safety, on the other. Currently, the problem of utilization and further use of animal manure is relevant. One of the options for efficient p
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Searls Manufacturing Co"

1

Raghu, Damodaran, Brad McKee, Cliff Sheriff, and James B. C. Wu. "High Temperature Erosion Resistant Materials for Petroleum Refinery Equipment." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01513.

Pełny tekst źródła
Streszczenie:
Abstract Petroleum refinery equipment components experience varying degrees of high temperature erosion and corrosion. The erosion corrosion effects are predominant in fluidized catalytic crackers, delayed cokers, flexicokers, thermal crackers and vacuum distillation units. Typical components affected are piping elbows, nozzles, valve seats and guides, thermowells and pump internals. Erosion corrosion assumes a more menacing dimension when coupled with higher temperature, where most structural alloys soften resulting in accelerated wear. Traditionally, high temperature erosion resistant compon
Style APA, Harvard, Vancouver, ISO itp.
2

Li, Yao, and Thenkurussi Kesavadas. "Welding Robotic Co-Worker Using Brain Computer Interface." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87503.

Pełny tekst źródła
Streszczenie:
Robotic co-workers are an emerging generation of physical robots promises to transform manufacturing with its ability to communicate and collaborate, both robot-to-robot and robot-to-human, opening the way to greater innovation and productivity. We designed a welding robotic co-worker which observes industrial part, searches welding seams, plans welding trajectory, and simulates welding result automatically. It largely benefits small and medium-sized manufacturing enterprises (SMEs) by allowing manufacturers handle low-volume orders without re-programming. As a co-worker, the robot communicate
Style APA, Harvard, Vancouver, ISO itp.
3

Notzon, Stephan. "High Pressure Dynamic Seal for Plunger Pumps With Pressures Above 35 KPSI." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25666.

Pełny tekst źródła
Streszczenie:
The sealing of moving parts under high pressure is one of the most demanding tasks in high pressure technology. For the design of the sealing elements all influencing factors such as mechanical deflections, motion speeds and fluid properties under high pressure must be fully understood and considered. Developments in both materials and manufacturing methods provide new possibilities for the design of sealing systems. This technical paper describes typical sealing issues of dynamic seals at pressures in excess of 35 kpsi with emphasis on plunger seals of high pressure reciprocating pumps. Diffe
Style APA, Harvard, Vancouver, ISO itp.
4

Duraisamy, Boopathi, Jerome Stanley Martin, Prabhu Chelladorai, Silambarasan Rajendran, Mubarak Marutholi, and Dinesh Kumar Madheswaran. "Impact of Hydrogen Enrichment on Performance and Emissions Characteristics of a Compression Ignition Engine Operated in Dual Fuel Mode with Karanja Oil Methyl Ester-Tire Pyrolysis Oil Blend." In Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility (ADMMS’25). SAE International, 2025. https://doi.org/10.4271/2025-28-0109.

Pełny tekst źródła
Streszczenie:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;The growing demand for fossil fuels and the search for alternatives have the potential to reduce emissions and enhance energy security. Karanja oil and tire pyrolysis oil (TPO) are identified as promising substitutes. This study examines the performance and emission characteristics of a 5.2 kW, 1500 rpm, four-stroke single-cylinder compression ignition engine. The engine was tested using diesel, the optimal combination of Karanja oil biodiesel (KOME) and TPO (50:50% volume ratio), and this KOME-TPO blend with hydrogen su
Style APA, Harvard, Vancouver, ISO itp.
5

Wilhelm, Cole, Evan Schaffer, Thomas Welles, and Jeongmin Ahn. "Experimental Investigation of the Manufacturing of Porous Solid Oxide Fuel Cells." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69235.

Pełny tekst źródła
Streszczenie:
Abstract Solid oxide fuel cells (SOFCs) are typically operated in a dual-chamber setup, where the fuel and oxidant flows are separated by the fuel cell. However, dual-chamber SOFCs (DCSOFCs) require sealant to keep the flows separate, meaning that rapid heating and cooling cycling could break the seal. The initial answer to this problem was a single-chamber SOFC (SC-SOFC). The SC-SOFC is simply a planar fuel cell mounted parallel to a mixed fuel and oxidant flow. This system operates through the catalytic reactions of the anode and cathode with the fuel and oxidant, respectively. The drawback
Style APA, Harvard, Vancouver, ISO itp.
6

Mauer, Georg, Karl-Heinz Rauwald, and Robert Vaßen. "The Potential of High Velocity Air Fuel Spraying (HVAF) to Manufacture Bond Coats in Thermal Barrier Coating Systems." In ITSC 2023. ASM International, 2023. http://dx.doi.org/10.31399/asm.cp.itsc2023p0625.

Pełny tekst źródła
Streszczenie:
Abstract Driven by the search for an optimum combination of particle velocity and process temperature to achieve dense hard metal coatings at high deposition efficiencies and powder feed rates, the high velocity air-fuel spraying process (HVAF) was developed. In terms of achievable particle velocities and temperatures, this process can be classified between high velocity oxy-fuel spraying (HVOF) and cold gas spraying (CGS). The particular advantages of HVAF regarding moderate process temperatures, high particle velocities as well as high productivity and efficiency suggest that the application
Style APA, Harvard, Vancouver, ISO itp.
7

Mayakrishnan, Jaikumar, Ramanathan Velmurugan, Induja SARAVANAN, et al. "Effect of Hybrid Nano additives on Performance and Emission Characteristics of a Diesel Engine Fueled with Waste Cooking Oil Biodiesel." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. SAE International, 2020. http://dx.doi.org/10.4271/2020-28-0521.

Pełny tekst źródła
Streszczenie:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;The search for a new renewable biofuel and aiming to make the environment clean is always a challenge for a researcher in developing a sustainable fuel for future mobility. In this context, vegetable oils were found as good alternative biofuels for diesel engines as they are biodegradable and renewable in nature. Most of the physio-chemical properties of vegetable oils are very closer to diesel. However, pure vegetable oils are expensive and using them to operate the diesel engine may affect the food supply chain. In vie
Style APA, Harvard, Vancouver, ISO itp.
8

Tianbin, Li, and Ma Lin. "Research and Development of Wet Winding Motor Reactor Coolant Pump for Generation 3 Nuclear Power Plant." In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-90741.

Pełny tekst źródła
Streszczenie:
Abstract Within an eight-year period, starting in September 2011 and ending in July 2019, Shanghai Electric-KSB Nuclear Pumps &amp; Valves Co., Ltd (hereinafter called SEC-KSB) has managed to develop a new pump type that can be used as reactor coolant pump (hereinafter called RCP) in generation 3 pressurized water reactor design. Wet winding motor reactor coolant pump (pump type RUV 650–870) is a customized and especially designed to meet the high safety criteria of generation 3 nuclear power plant, which is a hermetically sealed (without shaft seal system) type pump, and it is first time used
Style APA, Harvard, Vancouver, ISO itp.
9

Yukinori, S., Y. Ohta, G. Yanase, et al. "Status of Pre-Operating Tests for the Latest ABWR in Hamaoka Nuclear Power Unit No. 5." In 12th International Conference on Nuclear Engineering. ASMEDC, 2004. http://dx.doi.org/10.1115/icone12-49333.

Pełny tekst źródła
Streszczenie:
Kashiwazaki-Kariwa Nuclear Power Station Unit 6 and Unit 7 (K6 &amp; K7) are the first advanced boiling water reactors (ABWR) in the world. Toshiba has been engaged in the design and construction of boiling water reactors (BWR) for Hamaoka Nuclear Power Station Unit 5 (H5) of Chubu Electric Power Co., Inc. and Higashidori Nuclear Power Station Unit 1 of Tohoku Electric Power Co., Inc. H5 has features of the simplified reactor coolant recirculation system including a reactor internal pump (RIP) and reduction in plant startup time using a fine-motion control rod drive (FMCRD). The H5 has been im
Style APA, Harvard, Vancouver, ISO itp.
10

Ramona, Stoicescu, Stoicescu Razvan-Alexandru, Codrin Gheorghe, and Schroder Verginica. "LABORATORY METHODS AND PREVALENCE OF SARS-COV-2 INFECTIONS IN THE 2ND SEMESTER OF 2021 IN THE EMERGENCY CLINICAL COUNTY HOSPITAL OF CONSTANTA." In GEOLINKS Conference Proceedings. Saima Consult Ltd, 2021. http://dx.doi.org/10.32008/geolinks2021/b1/v3/11.

Pełny tekst źródła
Streszczenie:
"Diagnosing infections with SARS-CoV-2 is still of great interest due to the health and economic impact of COVID pandemic. The 4th wave of the COVID-19 pandemic is expected and is considered to be stronger and faster due to the dominance of Delta variant which is highly contagious [1]. SARS-CoV-2 also known as 2019-nCoV is one of the three coronaviruses (together with SARS-CoV or SARS-CoV1/Severe acute respiratory syndrome coronavirus), MERS-CoV /Middle East Respiratory Syndrome coronavirus) which can cause severe respiratory tract infections in humans [2]. Early diagnosis in COVID 19 infectio
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii