Gotowe bibliografie tematyczne / Section Shape

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Section Shape”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Section Shape”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Section Shape"

Tanveer, Muhammad, and Kwang-Yong Kim. "Effects of Bridge-Shaped Microchannel Geometry on the Performance of a Micro Laminar Flow Fuel Cell." Micromachines 10, no. 12 (2019): 822. http://dx.doi.org/10.3390/mi10120822.

Pełny tekst źródła

Streszczenie:

A laminar flow micro fuel cell comprising of bridge-shaped microchannel is investigated to find out the effects of the cross-section shape of the microchannel on the performance. A parametric study is performed by varying the heights and widths of the channel and bridge shape. Nine different microchannel cross-section shapes are evaluated to find effective microchannel cross-sections by combining three bridge shapes with three channel shapes. A three-dimensional fully coupled numerical model is used to calculate the fuel cell’s performance. Navier-Stokes, convection and diffusion, and Butler-V

Style APA, Harvard, Vancouver, ISO itp.

Anwar, Naveed, and Mohammad Qaasim. "Parametric Study of Reinforced Concrete Column Cross-Section for Strength and Ductility." Key Engineering Materials 400-402 (October 2008): 269–74. http://dx.doi.org/10.4028/www.scientific.net/kem.400-402.269.

Pełny tekst źródła

Streszczenie:

Several parameters and corresponding performance of reinforced concrete column cross-sections of different shapes (square, rectangular, circular, T-shape, I-shape, cross-shape, L-shape and C-shape) under various loading conditions have been studied in order to determine the suitable and optimum cross-sections for strength and ductility. In each cross-section shape, parameters include compressive strength of concrete (f’c), tensile strength of steel (fy), steel ratio (As/Ag), and angle of bending. In order to demonstrate the behavior and performance of the sections in terms of strength and duct

Style APA, Harvard, Vancouver, ISO itp.

Peng, Yongli, Zhengyi Kong, Ba Huu Dinh, et al. "Web Bend-Buckling of Steel Plate Girders Reinforced by Two Longitudinal Stiffeners with Various Cross-Section Shapes." Metals 13, no. 2 (2023): 323. http://dx.doi.org/10.3390/met13020323.

Pełny tekst źródła

Streszczenie:

This work performs an investigation into the optimal position of two longitudinal stiffeners with different cross-section shapes such as open section (L-shaped and T-shaped) and closed section (rectangular and triangular shapes) shapes of stiffened plate girders under bending loading through an optimization procedure using a gradient-based interior point (IP) optimization algorithm. The stiffener optimum locations are found by maximizing the bend-buckling coefficient, kb, generated from eigenvalue buckling analyses in Abaqus. The optimization procedure efficiently combines the finite element m

Style APA, Harvard, Vancouver, ISO itp.

Yang, Jingning, Yongxiang Wang, and Liansheng Ma. "Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending." Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 38, no. 4 (2020): 881–88. http://dx.doi.org/10.1051/jnwpu/20203840881.

Pełny tekst źródła

Streszczenie:

Based on the bending theory of beams, combining with the constitutive relationship of shape memory alloy materials, the asymmetric bending of shape memory alloy beams under concentrated load was studied. Considering tension-compression asymmetry on both sides of the tension and compression in the process of bending, tension-compression asymmetry coefficient was introduced, by using the step-by-step method. The stress distribution, neutral axis displacement, curvature and phase boundary of the beam sections of the I-shaped cross-section shape memory alloy beam were analyzed. The results show th

Style APA, Harvard, Vancouver, ISO itp.

Dang, Van Kien, Ngoc Anh Do, Tai Tien Nguyen, Anh Duy Huynh Nguyen, and Van Vi Pham. "An overview of research on metro tunnel lining in the sub-rectangular shape." Journal of Mining and Earth Sciences 62, no. 4 (2021): 68–78. http://dx.doi.org/10.46326/jmes.2021.62(4).08.

Pełny tekst źródła

Streszczenie:

Circular tunnels are the most popular shapes used in urban underground transportation systems when mechanized tunneling is used for tunnel excavation. However, circular tunnels have a small space utilization ratio. With the material development, non - circular tunnels such as sub - rectangular, U - shaped lining, etc. are now common, and their cross - section helps to improve the underground space utilization. However, there have been not many studies on the structure and the calculation method of the metro tunnels with the above cross - sections. The paper uses the analytical synthesis method

Style APA, Harvard, Vancouver, ISO itp.

Xie, Hong Tao. "Numerical Analysis on Influence of Cross Section Shape on Earthquake Resistant Capability of Shallow-Buried Tunnel." Applied Mechanics and Materials 405-408 (September 2013): 1292–96. http://dx.doi.org/10.4028/www.scientific.net/amm.405-408.1292.

Pełny tekst źródła

Streszczenie:

Taking portal segment in some shallow-buried tunnel in seismic region with strong motion as objects of study, the finite element analysis method was used to compare and assess the seismic behavior of the tunnel with different cross section shape. The results show that the linings displacement response of the tunnel with different cross section shape differs very minor under seismic load. Meanwhile there exists obvious difference in the lining internal forces of the tunnel with different cross section shape. Among all the tunnel with different section shape, the mechanics situation of the tunne

Style APA, Harvard, Vancouver, ISO itp.

Hu, FangYuan, JuanFeng Jin, ShuQing Wang, WenJing Dang, ZhenZhen Guo, and ZiChao Liu. "Classification of young males’ shoulder shapes based on cross-sectional morphological characteristics." E3S Web of Conferences 237 (2021): 02017. http://dx.doi.org/10.1051/e3sconf/202123702017.

Pełny tekst źródła

Streszczenie:

This paper focused on the different characteristics of the shoulder cross-section curves closely related to the shape to subdivide the shoulder shapes. In this paper, 213 young college male students aged 18-26 were selected to measure the shoulder data with three-dimensional body scanner. With the help of imageware12.0 and matlabr2012b software, the cross-section curves which could be used to classify the shoulder shapes were extracted, and the method of subdividing the shoulder shapes with the curvature radius of the characteristic points of the cross-section curve and the ratio of sagittal t

Style APA, Harvard, Vancouver, ISO itp.

Bocharova, E. N., P. V. Chistyakov, and R. K. Zhdanov. "Using 3D Scanning to Study Composite Slotted Tools from the Early Holocene of Eastern Siberia (the Case of Kazachka-1 Site)." Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories 27 (2021): 57–65. http://dx.doi.org/10.17746/2658-6193.2021.27.0057-0065.

Pełny tekst źródła

Streszczenie:

The article demonstrates the potential applications of 3D scanning of composite slotted tools and the use of models as a basis for further scientific research. The scanning was carried out with high-precision equipment (Solutionix D700 scanner). The scanner provides high precision data acquisition of the geometry and surface of an artefact. As examples of archaeological artefacts we used composite slotted tools from the site of Kazachka-I. There were two bone tools from cultural layers 19 and 11. As a result of three-dimensional scanning application, a series of high-resolution scaled models w

Style APA, Harvard, Vancouver, ISO itp.

Mukhamediev, T. A., S. A. Zenin, and A. S. Zharkikh. "The reliability assessment of the method for calculating the strength of oblique sections in reinforced concrete elements with various cross-sectional shape." Bulletin of Science and Research Center of Construction 33, no. 2 (2022): 139–49. http://dx.doi.org/10.37538/2224-9494-2022-2(33)-139-149.

Pełny tekst źródła

Streszczenie:

Introduction. The current standards for the design of concrete and reinforced concrete structures provide no methods for calculating the strength of the oblique sections in bending elements of various cross-sectional shape under the action of transverse forces. This prompts the designers to use simplifications in calculation of such elements, which, in some cases, may lead to excessive consumption of transverse reinforcement or the strength underestimation.Aim. The performed study was aimed at assessing the reliability of a new method for calculating the strength of oblique sections in bending

Style APA, Harvard, Vancouver, ISO itp.

Luca, Mihail, Nicolae Marcoie, Alexandru-Lucian Luca, and Daniel Toma. "Elements of hydraulic calculation of permanent movement at non-standard sewer collectors." IOP Conference Series: Earth and Environmental Science 1136, no. 1 (2023): 012034. http://dx.doi.org/10.1088/1755-1315/1136/1/012034.

Pełny tekst źródła

Streszczenie:

Abstract An important issue in the design of the main visitable sewer collectors is the hydraulic calculation in permanent movement and non-permanent movement. Some main collectors that can be visited have non-standard flow sections, a situation that complicates the hydraulic calculation. Non-standard flow sections derive from standard sections (circular, ovoid, bell, rectangular and mixed) through natural and anthropogenic degradation processes. The initially designed section changes over time in terms of shape, dimensions and roughness, a situation in which determining the hydraulic paramete

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Section Shape"

Mohammad, L. A. "Section shape effects and surface disturbances in lock-exchange flow." Thesis, University of Strathclyde, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382403.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wu, Bo. "The influence of the cross section shape on channel flow : modeling, simulation and experiment." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENT002/document.

Pełny tekst źródła

Streszczenie:

La modélisation des phénomènes physiologiques induits par un écoulement, tels que l'écoulement sanguin au travers d'une sténose ou l'écoulement d'air lors de la production de parole, repose souvent sur des théories quasi-unidimensionnelles ou bi-dimensionnelles. Cependant, il est établi que le développement des couches limites dépend de la section transversale. Le but de cette thèse est de modéliser, simuler et caractériser l'importance potentielle de la section transversale sur les écoulements laminaires, contrôlés en pression, en l'absence ou en présence d'une constriction. Des coordonnées d

Style APA, Harvard, Vancouver, ISO itp.

Basile, Franklin C. "Parametric shape generation of aerodynamic and structural objects for aerodynamic, structural and radar cross-section analysis." Master's thesis, University of Central Florida, 1988. http://digital.library.ucf.edu/cdm/ref/collection/RTD/id/79106.

Pełny tekst źródła

Streszczenie:

University of Central Florida College of Engineering Thesis This thesis describes the design and development of software to parametrically build three-dimensional aerodynamic objects or shapes for various engineering design and analysis activities. The software is designed to generate and display sufficient geometric output to completely define the object. Parameters are entered through a prompting sequence which determines the type of object and the amount of geometry needed to describe the object. Geometry created by this program will act as the baseline model for aerodynamic , structu

Style APA, Harvard, Vancouver, ISO itp.

Hülsing, Tobias [Verfasser]. "Probing quantum chromodynamics with the ATLAS detector : charged-particle event shape variables and the dijet cross-section / Tobias Hülsing." Mainz : Universitätsbibliothek Mainz, 2015. http://d-nb.info/1065687508/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sousa, Vagner Candido de. "Effects of superelastic shape memory springs on the aeroelastic behavior of a typical airfoil section: passive vibration attenuation and energy harvesting applications." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/18/18148/tde-11032017-123620/.

Pełny tekst źródła

Streszczenie:

The modeling, analysis and experimental verification of a two-degree-of-freedom typical aeroelastic section with superelastic shape memory alloy springs are presented. The focus is to investigate the effects of the phase transformation of the shape memory alloy springs on the flutter and post-flutter behaviors of the typical section. The shape memory alloy phase transformation kinetics is described by a modified version of well-known phenomenological models. The shape memory alloy spring model is based on classical spring design (with the pure shear assumption) and modified to account for the

Style APA, Harvard, Vancouver, ISO itp.

LARSSON, FREDRIK. "Evaluation of thermal expansion in busbarsused for battery electric vehicles." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302111.

Pełny tekst źródła

Streszczenie:

Thermal expansion can be an issue in solid busbars, the expansion is caused by several factors and can cause plastic deformation in connection points or structure around it. The expansion occurs due to temperature differences in the busbar as a result of altered ambient temperature and/or joule heating. The environment where a vehicle is used can be harsh and varying in temperatures a lot. For future fast charging systems, a high amount of current will be passed in the conductors. In a stationary installation, this could be solved by increasing the cross-section area. In vehicles, the weight,

Style APA, Harvard, Vancouver, ISO itp.

LARSSON, FREDRIK. "Evaluation of thermal expansion in busbars used for battery electric vehicles." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302111.

Pełny tekst źródła

Streszczenie:

Style APA, Harvard, Vancouver, ISO itp.

WANG, YONGBING. "STRUCTURAL BEHAVIOR AND DESIGN OF TWO CUSTOM ALUMINUM EXTRUDED SHAPES IN CUSTOM UNITIZED CURTAIN WALL SYSTEMS." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1147722350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Незамай, Б. С. "Метод та пристрій контролю напружено-деформованого стану магістральних трубопроводів за їх формою перерізів". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2008. http://elar.nung.edu.ua/handle/123456789/4254.

Pełny tekst źródła

Streszczenie:

Дисертація присвячена вирішенню проблеми оцінки напружено-деформованого стану відкритих ділянок лінійної частини магістральних трубопроводів. Показано, що відкриті ділянки лінійної частини магістральних трубопроводів знаходяться під дією різноманітних впливів, кількісний, а іноді і якісний аналіз яких в реальних умовах неможливий. Під дією зовнішніх впливів у тілі труб нагромаджуються дефекти, в тому числі дефекти форми перерізу, які впливають на загальний напружено-деформований стан конструкції. Розроблено математичну модель деформування трубопроводу, яка враховує можливі деформації його пере

Style APA, Harvard, Vancouver, ISO itp.

Johansson, Anders. "Shape functions in calculations of differential scattering cross-sections." Thesis, Uppsala University, Department of Physics and Astronomy, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-126674.

Pełny tekst źródła

Streszczenie:

Two new methods for calculating the double differential scattering cross-section (DDSCS) in electron energy loss spectroscopy (EELS) have been developed, allowing for simulations of sample geometries which have been unavailable to earlier methods of calculation. The new methods concerns the calculations of the thickness function of the DDSCS. Earlier programs have used an analytic approximation of a sum over the lattice vectors of the sample that is valid for samples with parallel entrance and exit surfaces.The first of the new methods carries out the sum explicitly, first identify

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Section Shape"

Merwe, C. G. Van der. Sectional titles, share blocks, and time-sharing. Butterworths, 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Harry, Ling, Lee S. W, and United States. National Aeronautics and Space Administration., eds. Reduction of the radar cross section of arbitrarily shaped cavity structures. Electromagnetics Laboratory, Dept. of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, 1987.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Birin, Eileen. Whatnots!: Thirty fascinating people share their extraordinary collections : plus a section on valuable resources. Neelie Pub., 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

B, Beck Fred, and Langley Research Center, eds. Electromagnetic scattering from arbitrarily shaped aperture backed by rectangular cavity recessed in infinite ground plane. National Aeronautics and Space Administration, Langley Research Center, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bekbasarov, Isabay. Study of the process of driving piles and dies on models. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1074097.

Pełny tekst źródła

Streszczenie:

The monograph presents the results of experimental and theoretical studies conducted using models of driven piles and tape dies. The influence of the cross-section size, length, shape of the trunk and the lower end of the piles on their submergability, energy intensity of driving and load-bearing capacity was evaluated. The design and technological features of new types of piles are considered. A method for determining the load-bearing capacity of a pile model based on the results of dynamic tests has been developed. Similarity conditions and formulas are presented that provide modeling of the

Style APA, Harvard, Vancouver, ISO itp.

Roe, Dilys. Getting the lion's share from tourism: Private sector-community partnerships in Namibia. IIED in association with NACOBTA, 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

L, Mikkelsen Kevin, and Lewis Research Center, eds. In-flight measurements of wing ice shapes and wing section drag increases caused by natural icing conditions. National Aeronautics and Space Administration, Lewis Research Center, 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Frederiksen, Norman O. Palynomorph distributions in the Rincon Shale (lower Miocene) of the Tajiguas Landfill section, Santa Barbara County, California. Dept. of the Interior, U.S. Geological Survey, 1995.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Section Shape"

Krampe, Michael, and Bernd Kuhlenkötter. "Experimental Investigation of the Influence of Different Nozzle Exit Geometries on the Depositing of Strands in Fused Layer Modeling." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2023. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-74010-7_2.

Pełny tekst źródła

Streszczenie:

Abstract The aim of this paper is to investigate the influence of different exit geometries of the nozzle in the FLM process. In order to determine the effects of nozzle exit shapes, an experimental investigation was carried out. Individual strands were deposited with different nozzle exit shapes, whose shape was subsequently determined by laser scanning and microscopic images of the strand cross-sections. In addition, the orientation in relation to the deposition direction and five different layer heights were investigated. Circular, triangular, square, and hexagonal nozzle exit shapes with c

Style APA, Harvard, Vancouver, ISO itp.

Kim, Yoon Young, Gang-Won Jang, and Soomin Choi. "Sectional Shape Functions of Thin-Walled Beams with General Cross-Section Shapes." In Solid Mechanics and Its Applications. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7772-5_9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Liu, W. P., Y. F. Shang, X. Yang, R. Deklerck, and J. Cornelis. "Shape Deformation Using Golden Section Search in PCA-Based Statistical Shape Model." In IFMBE Proceedings. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23508-5_171.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gay, Daniel. "Torsion of Composite Beams of Any Section Shape." In Composite Materials, 4th ed. CRC Press, 2022. http://dx.doi.org/10.1201/9781003195788-20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gay, Daniel. "Bending of Composite Beams of Any Section Shape." In Composite Materials, 4th ed. CRC Press, 2022. http://dx.doi.org/10.1201/9781003195788-19.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Brandstetter, Andrea, Najoua Bolakhrif, Christian Schiffer, Timo Dickscheid, Hartmut Mohlberg, and Katrin Amunts. "Deep Learning-Supported Cytoarchitectonic Mapping of the Human Lateral Geniculate Body in the BigBrain." In Lecture Notes in Computer Science. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-82427-3_2.

Pełny tekst źródła

Streszczenie:

AbstractThe human lateral geniculate body (LGB) with its six sickle shaped layers (lam) represents the principal thalamic relay nucleus for the visual system. Cytoarchitectonic analysis serves as the groundtruth for multimodal approaches and studies exploring its function. This technique, however, requires experienced knowledge about human neuroanatomy and is costly in terms of time. Here we mapped the six layers of the LGB manually in serial, histological sections of the BigBrain, a high-resolution model of the human brain, whereby their extent was manually labeled in every 30th section in bo

Style APA, Harvard, Vancouver, ISO itp.

Midson, Stephen, Youfeng He, Xiaogang Hu, Daquan Li, Fan Zhang, and Qiang Zhu. "Impact of Section Thickness on the Microstructure and Mechanical Properties of Semi-Solid Castings." In Shape Casting: 5th International Symposium 2014. John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888100.ch22.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Midson, Stephen, Youfeng He, Xiaogang Hu, Daquan Li, Fan Zhang, and Qiang Zhu. "Impact of Section Thickness on the Microstructure and Mechanical Properties of Semi-Solid Castings." In Shape Casting: 5th International Symposium 2014. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48130-2_22.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Li, Xia, Haigang Tian, Yadong Dong, and Yuechen Duan. "Study on Piezoelectric Energy Collector with Different Section Shape." In Advances in Mechanical Design. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6553-8_5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ji, Jun, Dun-Hua Huang, Fei-Fei Xing, and Xin Chen. "Design of Rectangular Part Layout Optimization System Based on Standard Dimension." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_26.

Pełny tekst źródła

Streszczenie:

Abstract In many industries of the national economy, the problem of material optimization layout will be encountered. In this paper, the layout problem of two-dimensional guillotine-cutting stock is studied, and the related concepts of the same-shape block and the same-shape section are proposed. To improve the efficiency of layout, the standard dimension of same-shape block and the standard dimension of same-shape section are proposed. By applying the standard dimension, the calculation speed and the efficiency of the algorithm will be improved effectively.

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Section Shape"

Zamora Durán, María José, Daniel Martínez Vargas, and Andrés González Ureña. "Frames with Round Hollow Structural Section and W Shape Intentionally Eccentric Braces." In IABSE Congress, San José 2024: Beyond Structural Engineering in a Changing World. International Association for Bridge and Structural Engineering (IABSE), 2024. https://doi.org/10.2749/sanjose.2024.1351.

Pełny tekst źródła

Streszczenie:

Offsetting the axis of an otherwise conventional steel brace with respect to the forces’ line of action modifies its force-displacement response and brings about significant benefits for earthquake- resistant design. When used in multi-storey Frames with Intentionally Eccentric Braces (FIEBs), the adjustable eccentricity of Braces with Intentional Eccentricity (BIEs) grants a better control over the dynamic behaviour of the structure and reduces incidental overstrength.In this article, the suitability of round Hollow Structural Sections (HSS) and W shapes as bracing

Style APA, Harvard, Vancouver, ISO itp.

Takashima, Masato, Hiroshi Tagawa, and Xingchen Chen. "Application of T-shaped steel splice member to brace-end connection of circular hollow section brace." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.3385.

Pełny tekst źródła

Streszczenie:

Usage of hollow section braces is popular in steel structures for their superior performance. To connect tubular members with the structural frame, field-bolted connections between the slotted- in splice and gusset plates are often utilized. However, single-shear bolted connections have a higher risk of sway mode buckling because of the eccentricity between the gusset plate and the brace axis. This study proposes a brace end connection in which the T-shaped splice members are inserted into the tubular brace so that the gusset plate axis is identical with the brace axis. The T-shaped s

Style APA, Harvard, Vancouver, ISO itp.

Pasini, Damiano. "Shape Transformers for Material and Shape Selection." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84894.

Pełny tekst źródła

Streszczenie:

This paper presents a method for selecting materials, cross-section shapes, and combinations thereof. The novelty of the method is the definition of Shape Transformers. These parameters are dimensionless measures of the geometric quantities of a cross-section. They describe the shape properties of a cross-section regardless of size and are thus invariant to any scaling imposed on the cross-section size. Shape Transformers are valuable with modelling the equation of mechanics and with the development of selection charts for optimum design. The rationale of the approach is that the fundamental e

Style APA, Harvard, Vancouver, ISO itp.

Cougo, Bernardo. "Optimal cross section shape of tape wound cores." In 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe). IEEE, 2015. http://dx.doi.org/10.1109/epe.2015.7309350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Joo, Sung-Hwan, Kuang-Hua Chang, and Alfred Striz. "Shape Design Optimization of CAD-Based Flume Section." In 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-6934.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Letelier, Mario F., Rau´l P. Gaete, and Dennis A. Siginer. "Steady Viscoelastic Flow in Channels of Arbitrarily Varying Cross-Section Shape." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43954.

Pełny tekst źródła

Streszczenie:

An analytical method for studying flow in wavy channels is presented. The flow is considered laminar and steady, and the fluid viscoelastic. A shape factor is inserted in expressions for the stream function, thus allowing to model many different cross-section shapes that are the outcome of the chosen shape factor. This work aims at investigating kinematic aspects of the flow that may enhance heat transfer between the channel walls and the fluid.

Style APA, Harvard, Vancouver, ISO itp.

Sugiyama, Hiroyuki, Yoshimitsu Tanii, and Yoshihiro Suda. "Analysis of Wheel/Rail Contact Geometry in Turnout Section." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13066.

Pełny tekst źródła

Streszczenie:

In this investigation, a numerical procedure that can be used for the analysis of wheel/rail two-point contact geometries in turnout sections is developed. In turnout section, the tongue rail changes its shape along the track. Cross-sectional shapes of the tongue rail, therefore, need to be generated by interpolations along the rail and these profiles are used to determine the location of contact points for given location of wheelset along the track trajectory. Numerical examples of wheel/rail contact in point section are presented in order to demonstrate the use of the procedure developed in

Style APA, Harvard, Vancouver, ISO itp.

Ma, Dexian, Yin Zhang, and Yunfei Chen. "Effects of Microchannel Cross-section Shape on Particle Focusing." In 2019 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2019. http://dx.doi.org/10.1109/3m-nano46308.2019.8947374.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tariq, Hassan, and Adnan Maqsood. "Radar Cross Section Based Shape Optimization of Chine Forebody." In 2022 19th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2022. http://dx.doi.org/10.1109/ibcast54850.2022.9990177.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yang, Mingdai, Xiaolong Leng, Waqas Ul Arifeen, P. Rosaiah, and Tae Jo Ko. "Influence of Obstacle Section Shape on Electro-thermo-convection." In International Conference of Asian Society for Precision Engineering and Nanotechnology. Research Publishing Services, 2022. http://dx.doi.org/10.3850/978-981-18-6021-8_or-12-0141.html.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Section Shape"

Vorjohann, Felix, and Reinhard Schiffers. Analysis of spiral mandrel dies with novel channel geometries to draw conclusions on the purging time of the melt using CFD. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.ex.1.

Pełny tekst źródła

Streszczenie:

Spiral mandrel dies are deeply integrated into the extrusion process and are the predominant die type for manufacturing products with a ring-shaped cross-section, e.g. blown film. The geometry of the axial spiral mandrel die is characterized by a spiral mandrel with one or more feed holes that merge into the spiral channels. The spiral channels themselves are embedded in the mandrel and have a characteristic u-shape in cross-section, which is dictated by the milling head used during manufacturing. In the past, numerous geometric parameters of the conventional axial spiral mandrel distributor h

Style APA, Harvard, Vancouver, ISO itp.

Hallerberg, Mark. Explaining European Patterns of Taxation: From the Introduction of the Euro to the Euro-Crisis. Inter-American Development Bank, 2012. http://dx.doi.org/10.18235/0009026.

Pełny tekst źródła

Streszczenie:

This paper reviews developments in Europe from the eve of the introduction of the euro through the euro crisis. The paper begins with a discussion of the tax reform agenda. Although there are differences in the literature on specific taxes, and while European countries vary in their preferred levels of taxation, there is general consensus on the shape reforms should take. The paper then discusses the evolution of tax systems with the overall agenda in mind. It is found that overall revenue levels were broadly stable until just before the crisis, but marginal rates in corporate and top personal

Style APA, Harvard, Vancouver, ISO itp.

Chiorean, Cosmin G., and Stefan M. Buru. ULTIMATE AND NOMINAL STRENGTH ANALYSIS OF COMPOSITE SECTIONS WITH ARBITRARY SHAPE. The Hong Kong Institute of Steel Construction, 2018. http://dx.doi.org/10.18057/icass2018.p.140.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Clark, Andrew E., Angela Greulich, and Hippolyte d’Albis. The age U-shape in Europe: the protective role of partnership. Verlag der Österreichischen Akademie der Wissenschaften, 2021. http://dx.doi.org/10.1553/populationyearbook2021.res3.1.

Pełny tekst źródła

Streszczenie:

In this study, we ask whether the U-shaped relationship between life satisfactionand age is flatter for individuals who are partnered. An analysis of cross-sectionalEU-SILC data indicates that the decline in life satisfaction from the teens to thefifties is almost four times larger for non-partnered than for partnered individuals,whose life satisfaction essentially follows a slight downward trajectory with age.However, the same analysis applied to three panel datasets (BHPS, SOEP andHILDA) reveals a U-shape for both groups, albeit somewhat flatter for the partneredthan for the non-partnered in

Style APA, Harvard, Vancouver, ISO itp.

Fenn, Alan J. Bistatic Radar Cross Section of a Perfectly Conducting Rhombus-Shaped Flat Plate. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada223418.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

López Bóo, Florencia. Intercontinental Evidence on Socioeconomic Status and Early Childhood: Cognitive Skills: Is Latin America Different? Inter-American Development Bank, 2013. http://dx.doi.org/10.18235/0011483.

Pełny tekst źródła

Streszczenie:

This paper documents disparities in cognitive development- as measured by a receptive vocabulary test-between children from households with high and low socioeconomic status (SES) in two different phases of childhood (before and after early school years) in four developing countries: Peru, Ethiopia, India, and Vietnam. Intercontinental evidence on the timing, shape, pattern, and persistence of these disparities is provided. The nonparametric analysis suggests that disparities found at age 5 persist into the early school years across all four countries, and the conditional analysis shows that S

Style APA, Harvard, Vancouver, ISO itp.

Hasanov, Fakhri, Muhammad Javid, and Heyran Aliyeva. The Role of Petrochemical Sector Exports in the Diversification of the Saudi Economy: A Scenario Analysis of Foreign and Domestic Price Shocks. King Abdullah Petroleum Studies and Research Center, 2023. http://dx.doi.org/10.30573/ks--2023-dp21.

Pełny tekst źródła

Streszczenie:

Diversification of the economy, including exports, is a core goal of Saudi Vision 2030 (SV2030). The petrochemical sector can considerably contribute to the Kingdom’s diversification strategy, as it holds a substantial share in non-oil exports. First, this study econometrically estimated how exports of chemicals and rubber-plastics were shaped by theoretically articulated domestic and foreign factors over the 1993-2020 period. Then, the estimated export equations were integrated into a general equilibrium model, called the King Abdullah Petroleum Studies and Research Center (KAPSARC) Global En

Style APA, Harvard, Vancouver, ISO itp.

Martin, Dougal, Juan José Durante, and Ben Rowland. Belize: A Private Sector Assessment: Private Sector Development Discussion Paper #6. Inter-American Development Bank, 2010. http://dx.doi.org/10.18235/0006918.

Pełny tekst źródła

Streszczenie:

Two basic factors shape private sector development in Belize. First, the population is small - only 322,000 as of mid-2008. This limits the size of the domestic market and potential economies of scale. The economy was only US$1.3 billion in 2009 and diversification is limited. The economy depends strongly on trade with the world economy, both as a market for domestic produce and as a source of the wide range of products that would be costly or impossible to produce domestically. Aside from Caribbean micro-states, Belize is the fourth most open economy in Latin America and the Caribbean (Figure

Style APA, Harvard, Vancouver, ISO itp.

Allen, Luke, Joon Lim, Robert Haehnel, and Ian Dettwiller. Helicopter rotor blade multiple-section optimization with performance. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/41031.

Pełny tekst źródła

Streszczenie:

This paper presents advancements in a surrogate-based, rotor blade design optimization framework for improved helicopter performance. The framework builds on previous successes by allowing multiple airfoil sections to designed simultaneously to minimize required rotor power in multiple flight conditions. Rotor power in hover and forward flight, at advance ratio 𝜇 = 0.3, are used as objective functions in a multi-objective genetic algorithm. The framework is constructed using Galaxy Simulation Builder with optimization provided through integration with Dakota. Three independent airfoil sections

Style APA, Harvard, Vancouver, ISO itp.

Pradelli, Juan Jose, Kimberly Waithe, Allan Wright, et al. Caribbean Region Quarterly Bulletin: Volume 6: Issue 1: March 2017. Inter-American Development Bank, 2017. http://dx.doi.org/10.18235/0008149.

Pełny tekst źródła

Streszczenie:

This Caribbean Region Quarterly Bulletin explores constraints to private sector development in the Caribbean. With economic growth weak and dependent on only a few sectors -either tourism or commodity exports- authorities in all countries aim at diversifying the economy and boosting private sector development. While the private sector in each country faces specific issues, most share challenges resulting from red tape, complicated and tedious processes and weak environments for doing business. As usual, the Quarterly Bulletin covers the economic developments in The Bahamas, Barbados, Guyana, J

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!