Zaloguj się

Gotowe bibliografie tematyczne / Shell length

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Shell length”

Autor: Grafiati

Data publikacji: 2 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Shell length”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Shell length"

1

Silalahi, Torang J. P., and Cyska Lumenta. "Morphometric measurements of pearl shell shells Pinctada margaritifera for aquarium cultivation." Jurnal Moluska Indonesia 6, no. 2 (2022): 54–58. https://doi.org/10.54115/jmi.v6i2.55.

Pełny tekst źródła

Streszczenie:

The pearl oyster Pinctada margaritifera or the black-lipped oyster is one of the important species used in the pearl industry. The availability of natural pearl oyster seeds is limited, while exploitation is increasing. The purpose of this field work practice is to measure and observe the morphometric comparisons of Arakan, Mantehage Bango and Talengen waters. The time for the implementation of the field work practice begins in January 2020. This field work practice is carried out at the Mamuaya family work laboratory, Malalayang. The method used in this field work practice is a method of dire

Style APA, Harvard, Vancouver, ISO itp.

2

Sant'Anna, Bruno S., Cilene M. Zangrande, Alvaro L. D. Reigada, and Marcelo A. A. Pinheiro. "Shell utilization pattern of the hermit crab Clibanarius vittatus (Crustacea, Anomura) in an estuary at São Vicente, State of São Paulo, Brazil." Iheringia. Série Zoologia 96, no. 2 (2006): 261–66. http://dx.doi.org/10.1590/s0073-47212006000200018.

Pełny tekst źródła

Streszczenie:

We evaluated the gastropod shell utilization pattern of the hermit crab Clibanarius vittatus (Bosc, 1802) at Pescadores Beach in São Vicente, State of São Paulo, Brazil. Specimens were collected monthly from May 2001 through April 2003, in the intertidal zone at low tide. The crabs were weighed and their carapace shield length measured. All gastropod shells were identified and had their shell biometric parameters (total length and aperture length) measured (mm) and weighed (g). A total of 2,344 hermit crabs (644 males, 1,594 females, 45 ovigerous females and 61 individuals in intersex), using

Style APA, Harvard, Vancouver, ISO itp.

3

Li, Shou-Chao, Yu-Chen Zhang, Le Chang, Chang-Yu Zhou, and Xiao-Hua He. "Research on Buckling Load of Cylindrical Shell with an Inclined through Crack under External Pressure and Its Solution." Metals 13, no. 1 (2023): 174. http://dx.doi.org/10.3390/met13010174.

Pełny tekst źródła

Streszczenie:

In order to evaluate the reliability of cracked cylindrical shell effectively and reasonably, study the load capacity of cracked structures and understand the failure modes of cracked structures, in this paper the finite element method is adopted for cylindrical shells with mixed mode crack. The finite element models of cylindrical shell with an inclined through crack under external pressure were established by finite element method, the elastic and elastic-plastic buckling loads were calculated. The influences of crack length (c), crack angle (θ), cylindrical shell length-radius ratio (L/R),

Style APA, Harvard, Vancouver, ISO itp.

4

Matos, Alisson Sousa, Helena Matthews-Cascon, and Oscar R. Chaparro. "Morphometric analysis of the shell of the intertidal gastropod Echinolittorina lineolata (d'Orbigny, 1840) at different latitudes along the Brazilian coast." Journal of the Marine Biological Association of the United Kingdom 100, no. 5 (2020): 725–31. http://dx.doi.org/10.1017/s0025315420000624.

Pełny tekst źródła

Streszczenie:

AbstractMorphometric analysis is one of the tools widely used to quantify, analyse and describe the variations in the biological forms of animals. In this study, we examined the linear morphometric variations of the shell of the small intertidal gastropod Echinolittorina lineolata and compared the patterns to identify variations among populations and between sexes. The individuals were collected from latitudes 3°S, 14°S, 21°S and 23°S along the Brazilian coast. Traditional morphometric analysis was performed, and the morphometric variables of the shells, namely, the length and width of the she

Style APA, Harvard, Vancouver, ISO itp.

5

IDRIS, MOHD HANAFI, MUHAMMAD ATIF AWANG, ABU HENA MUSTAFA KAMAL, et al. "SYMBIOTICALLY SNAPPER SHRIMP ANCHISTUS CUSTOIDES BRUCE, 1977 (DECAPODA: PALAEMONIDAE) INHABITING THE MANTLE CAVITY OF THE PEN SHELL (BIVALVIA: PINNIDAE)." JOURNAL OF SUSTAINABILITY SCIENCE AND MANAGEMENT 17, no. 10 (2022): 136–48. http://dx.doi.org/10.46754/jssm.2022.10.010.

Pełny tekst źródła

Streszczenie:

Snapper shrimp is a symbiotic organism usually hidden under the rocks, sponges and pen shells in the seagrass and coral habitats. The relationship study within snapper shrimp and pen shell was conducted from Merambong shoal, one of the biggest seagrass beds in peninsular Malaysia. A total of 40 individual pen shells were collected randomly and four species of pen shells were identified. 40 Anchistus custoides were found inhabiting symbiotically in the mantle cavity of the pen shell as solitary males and females and heterosexual pairs. Pen shell, Pinna bicolor and Atrina vexillum recorded the h

Style APA, Harvard, Vancouver, ISO itp.

6

Mohd, Hanafi Idris, Atif Awang Muhammad, Hena Mustafa Kamal Abu, et al. "Symbiotically snapper shrimp Anchistus custoides Bruce, 1977 (Decapoda: Palaemonidae) inhabiting the mantle cavity of the pen shell (Bivalvia: Pinnidae)." Journal of Sustainability Science and Management 17, no. 10 (2022): 136–48. https://doi.org/10.46754/jssm.2022.10.010.

Pełny tekst źródła

Streszczenie:

Snapper shrimp is a symbiotic organism usually hidden under the rocks, sponges and pen shells in the seagrass and coral habitats. The relationship study within snapper shrimp and pen shell was conducted from Merambong shoal, one of the biggest seagrass beds in peninsular Malaysia. A total of 40 individual pen shells were collected randomly and four species of pen shells were identified. 40 Anchistus custoides were found inhabiting symbiotically in the mantle cavity of the pen shell as solitary males and females and heterosexual pairs. Pen shell, Pinna bicolour and Atrina vexillum recorded the

Style APA, Harvard, Vancouver, ISO itp.

7

Martel, André, Teresa M. Hynes, and John Buckland-Nicks. "Prodissoconch morphology, planktonic shell growth, and size at metamorphosis in Dreissena polymorpha." Canadian Journal of Zoology 73, no. 10 (1995): 1835–44. http://dx.doi.org/10.1139/z95-216.

Pełny tekst źródła

Streszczenie:

Larval shell morphology and morphometry of the zebra mussel, Dreissena polymorpha, were examined using scanning electron and light microscopy. Larval shell morphology is typical of bivalves having planktotrophic development. The prodissoconch I (PI) has a pitted-punctate surface contrasting markedly with the conspicuous fine concentric or commarginal lines of the prodissoconch II (PII) and dissoconch (D) shells. Length-frequency distributions of the prodissoconch, which were obtained from disarticulated valves of bleached early juveniles (0.5–2 mm) (specimens from west-central Lake Erie), indi

Style APA, Harvard, Vancouver, ISO itp.

8

Allsay, Kitsash Addifisyukha Cintra, and Eny Djoko Setyono Dwi. "Shell morphology and size distribution of Turbo spp in Sepanjang Beach by shell collecting: An Initial Survey." BIO Web of Conferences 70 (2023): 03003. http://dx.doi.org/10.1051/bioconf/20237003003.

Pełny tekst źródła

Streszczenie:

Turbo spp. in Sepanjang Beach, Gunung Kidul, Indonesia, are at risk of depletion due to their popularity for consumption and decoration. Protecting this species demands sustainable management practices. This initial survey aimed to examine the shell morphology, size distribution, and shell growth patterns of Turbo spp. at Sepanjang Beach, Indonesia, to establish baseline data for future research. A total of 233 shells were collected randomly and analyzed for morphological parameters. Shell dimensions exhibited variations in size, shape, color, and whorl features. Shells ranged from 7.59 to 60.

Style APA, Harvard, Vancouver, ISO itp.

9

Goodsell, J. G., S. C. Fuller, A. G. Eversole, M. Castagna, and R. A. Lutz. "Larval and early postlarval shell morphology of several venerid clams." Journal of the Marine Biological Association of the United Kingdom 72, no. 1 (1992): 231–55. http://dx.doi.org/10.1017/s0025315400048906.

Pełny tekst źródła

Streszczenie:

Shell morphological features of the larvae and early postlarvae of species from two venerid (Mollusca: Lamellibranchia) subfamilies, Chioninae (Mercenaria mercenaria, M. campechiensis, M. campechiensis texana and Chionecancellata) and Pitarinae (Pitar morrhuanus), were examined using scanning electron microscopy. A single elongated fold on the anterior half of the left valve became more robust and a small fold in the centre of the right valve increased in length along the hinge line throughout the larval period. A MANOVA of shell length, shell height and provinculum length detected statistical

Style APA, Harvard, Vancouver, ISO itp.

10

Nwoji, C. U., D. G. Ani, O. A. Oguaghamba, and V. T. Ibeabuchi. "Static Bending of Isotropic Circular Cylindrical Shells Based on the Higher Order Shear Deformation Theory of Reddy and Liu." International Journal of Applied Mechanics and Engineering 26, no. 3 (2021): 141–62. http://dx.doi.org/10.2478/ijame-2021-0041.

Pełny tekst źródła

Streszczenie:

Abstract In this paper, a displacement based shear deformation theory formulated on the cubic in-plane displacement field equation of Reddy and Liu is presented for the static bending analysis of isotropic circular cylindrical shells. The adopted displacement field accounts for a quadratic (parabolic) distribution of the transverse shear through the shell thickness as well as satisfies the need for a stress free upper and lower boundary surfaces of the shell. The equations of static equilibrium are obtained on application of the principle of virtual work. Numerical results of the bending analy

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Shell length"

1

Cheater, Brian James. "Fatigue life of bulk carrier side shell frame lower toes as a function of ship length and loading condition." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0015/MQ55492.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Cheng, Xiang. "Gold-Nanoparticle Cored Carbazole Functionalized Star-like Copolymer Hybrid Nanomaterial with Tunable Properties." Case Western Reserve University School of Graduate Studies / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=case1522803372777943.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Fajuyitan, Oluwole Kunle. "Length effects in elastic imperfect cylindrical shells under uniform bending." Thesis, Imperial College London, 2018. http://hdl.handle.net/10044/1/64813.

Pełny tekst źródła

Streszczenie:

Recent computational investigations into the buckling behaviour of perfect elastic thin-walled cylindrical shells under uniform bending, a ubiquitous reference structural system that enjoys wide practical applications, have demonstrated that the stability behaviour of this shell system depends largely on the length. Consequently, four distinct length domains – short, medium, transitional and long – were introduced to categorise the response of the system based on the relative influence of end boundary restraint and cross-sectional ovalisation. However, most investigations on this particular sh

Style APA, Harvard, Vancouver, ISO itp.

4

Postnikov, Sergey A. "Topics in the Physics and Astrophysics of Neutron Stars." Ohio University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1259174094.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Watson, Brian T. "Population biology and fish hosts of several federally endangered freshwater mussels (Bivalvia: Unionidae) of the upper Tennessee River drainage, Virginia and Tennessee." Thesis, This resource online, 1999. http://scholar.lib.vt.edu/theses/available/etd-08222008-063606/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Cross, Jaimie. "The dynamics of suspended particles in a seasonally stratified coastal sea." Thesis, University of Plymouth, 2013. http://hdl.handle.net/10026.1/1461.

Pełny tekst źródła

Streszczenie:

A comprehensive investigation into the relationship between physical forcing and sus- pended particles in the shallow shelf region of the Western English Channel has been conducted, in order to evaluate the temporal dynamics of suspended particle populations. Measurements were taken across tidal cycles and seasons at station L4, part of the Western Channel Observatory (WCO), using the combination of a free-fall microstructure profiler and holographic imaging. Confirmation that L4 is weakly stratified is given, and that the formation of the seasonal thermocline is substantially altered by the s

Style APA, Harvard, Vancouver, ISO itp.

7

Moreira, Renata. "Estudo da pirólise lenta da casca da castanha de caju." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-07102015-090727/.

Pełny tekst źródła

Streszczenie:

A casca da castanha de caju (CCC), um resíduo agrícola da produção de castanha, proveniente da região nordeste do Brasil foi caracterizada e submetida ao processo de pirólise lenta. As propriedades do bio-carrvão, do bio-óleo e dos gases produzidos foram investigados e potenciais aplicações foram propostas. A CCC foi caracterizada pela seguintes técnicas: análise elementar CHNS, umidade total, conteúdo de cinzas, matérias voláteis, poder calorífico superior e por análise termogravimétrica. A análise termogravimétrica sob fluxo de nitrogênio mostrou que a decomposição é dominada pela degradação

Style APA, Harvard, Vancouver, ISO itp.

8

MOREIRA, RENATA. "Estudo da pirólise lenta da casca da castanha de caju." reponame:Repositório Institucional do IPEN, 2015. http://repositorio.ipen.br:8080/xmlui/handle/123456789/26078.

Pełny tekst źródła

Streszczenie:

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2016-04-08T12:32:34Z No. of bitstreams: 0<br>Made available in DSpace on 2016-04-08T12:32:34Z (GMT). No. of bitstreams: 0<br>Dissertação (Mestrado em Tecnologia Nuclear)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Style APA, Harvard, Vancouver, ISO itp.

9

Wang, Chong Aerospace &amp Mechanical Engineering Australian Defence Force Academy UNSW. "Vibro-acoustic analysis of inverter driven induction motors." Awarded by:University of New South Wales - Australian Defence Force Academy. School of Aerospace and Mechanical Engineering, 1998. http://handle.unsw.edu.au/1959.4/38706.

Pełny tekst źródła

Streszczenie:

With the advent of power electronics, inverter-driven induction motor are finding increased use in industries because of applications that demand variable speed operations and because of the potential savings in energy usage. However, these drives sometimes produce unacceptably high levels in vibration and acoustic noise. A literature survey has revealed that while there has been intensive research on the design of inverters to minimize acoustic noise radiation from these drives, the vibro-acoustic behaviour of an induction motor structure has received relatively little attention. The primary

Style APA, Harvard, Vancouver, ISO itp.

10

Diarra, Cheick Oumar. "Modélisation par dynamique moléculaire ab initio du transport des excitons et du transport thermique dans les semiconducteurs organiques pour la collecte d'énergie." Electronic Thesis or Diss., Strasbourg, 2024. http://www.theses.fr/2024STRAD013.

Pełny tekst źródła

Streszczenie:

L'exciton joue un rôle clé dans le fonctionnement des cellules solaires organiques (OSCs). Comprendre sa dynamique dans les semiconducteurs organiques est essentiel, notamment pour améliorer la longueur de diffusion, une propriété déterminante pour la performance des hétérojonctions planaires, envisagées comme une alternative plus stable aux hétérojonctions en volume (BHJ). Dans la première partie de cette thèse, nous avons développé une approche méthodologique robuste et polyvalente pour évaluer la longueur de diffusion de l'exciton dans les semiconducteurs organiques. Cette approche, basée s

Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Shell length"

1

Bartlett, Ross. Lamentations for Lent: Whom shall I fear? : lenten reflections on the Psalms of lament. United Church Pub. House, 2004.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Narlikar, A. V. Small Superconductors—Introduction. Edited by A. V. Narlikar. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780198738169.013.1.

Pełny tekst źródła

Streszczenie:

This article provides an overview of small superconductors, including some of the basic definitions, prominent characteristics, and important effects manifested by such materials. In particular, it discusses size effects, surface effects, electron-mean-free-path effects, phase slips, unusual vortex states, and proximity effects. The article first considers the two characteristic length scales of superconductors, namely the magnetic penetration depth and coherence length, before proceeding with an analysis of two size effects that account for how superconductivity responds when the bulk sample

Style APA, Harvard, Vancouver, ISO itp.

3

Volberda, Henk, Frans van den Bosch, and Kevin Heij. Enablers and Inhibitors of Business Model Innovation. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198792048.003.0005.

Pełny tekst źródła

Streszczenie:

Chapter 5 discusses the different catalysts and inhibitors which firms encounter when they innovate their business model, including the various factors that prevented the Dutch telecoms company KPN from renewing its business model. There follows an analysis of how factors such as the organizational culture and style of leadership, the characteristics of the CEO, the degree of external orientation, organizational characteristics, and institutional stakeholders can delay or speed up business model innovation. The roles played, for example, by transformational leadership, the length of the tenure

Style APA, Harvard, Vancouver, ISO itp.

4

Bauser, M., G. Sauer, and K. Siegert, eds. Extrusion. 2nd ed. Translated by A. F. Castle. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.ex2.9781627083423.

Pełny tekst źródła

Streszczenie:

Extrusion, Second Edition provides a complete and thorough overview of the processes, equipment, and tooling used to extrude metals into desired shapes and forms. It covers all types of processes, including direct, indirect, and hydrostatic extrusion, cable sheathing, continuous extrusion, and the extrusion of powder metals. It describes each process in detail, explaining how the associated forces, stresses, displacements, and heat cause metals to deform and flow and how it affects the microstructure and properties of the resulting products. It discusses the design, setup, and control of extru

Style APA, Harvard, Vancouver, ISO itp.

5

Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications. AMPP, 1990. https://doi.org/10.5006/nace_rp0387-1990.

Pełny tekst źródła

Streszczenie:

Scope This recommended practice defines minimum physical quality and inspection standards for cast sacrificial anodes for offshore applications. The objectives of this recommended practice are: (1) to standardize an industry-wide practice that can be used by consultants, manufacturers, and users to define the physical requirements of anodes; and (2) to be specific enough to assist the inspection authority in their task of confirming that anodes comply with the physical requirements. This recommended practice is applicable to the majority of anodes used on fixed offshore structures, i.e. ,cast

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Shell length"

1

Gambash, Gil. "The Shell and the Skeleton: The Circumstances for the Transition in Shipbuilding Technologies in the Late-Antique Southern Levant." In “And in Length of Days Understanding” (Job 12:12). Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27330-8_65.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Jiang, Fuhua, and Xianhe Deng. "Deep Heat Transfer Performance and Ratio of Length to Diameter in Shell and Tube Heat Exchangers." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23998-4_55.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Muzamal, Hussain. "Single-walled Carbon Nanotubes Modeled as Flügge Shell Theory: Influences of Length-to-Diameter Ratios 2." In Small-scale Computational Vibration of Carbon Nanotubes: Composite Structure. River Publishers, 2024. http://dx.doi.org/10.1201/9781032656229-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Lackner, Florian. "Synthesis of Metallic Nanoparticles in Helium Droplets." In Topics in Applied Physics. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94896-2_11.

Pełny tekst źródła

Streszczenie:

AbstractHelium droplets provide a unique cold and inert synthesis environment for the formation of nanoparticles. Over the past decade, the method has evolved into a versatile tool, ready to be used for the creation of new nanomaterials. Species with different characteristics can be combined in a core@shell configuration, allowing for the formation of nanoparticles with tailored properties. The realm of structures that can be formed extends from clusters, comprising only a few atoms, to spherical sub-10 nm particles and nanowires with a length on the order of a few hundred nanometers. The form

Style APA, Harvard, Vancouver, ISO itp.

5

Mikhasev, Gennadi I., and Petr E. Tovstik. "Wave Packets in Medium-length Cylindrical Shells." In Localized Dynamics of Thin-Walled Shells. Chapman and Hall/CRC, 2020. http://dx.doi.org/10.1201/9781315115467-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Tang, Yunpeng, Muran Qi, Huiping Zhu, Zhenfeng Tong, and Chenglong Wang. "Mechanical and Numerical Simulation Analysis for the Insertion Section Sampling of Irradiation Charpy Specimen Reconstitution." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_23.

Pełny tekst źródła

Streszczenie:

AbstractThe reactor pressure vessel (RPV) is one of the most critical equipment in the pressurized water reactor, and its structural integrity is the key factor that determines the operational safety and service life of the reactor. In practical applications, the aging degree of RPV can be evaluated through the ductile-brittle transition temperature (DBTT) curve of the Charpy impact specimen pre-placed in RPV. However, due to the space limitation inside the reactor core, the available irradiation surveillance specimens are limited for mechanical testing. Especially, most reactors have faced th

Style APA, Harvard, Vancouver, ISO itp.

7

Unrath, W., F. Klammler, K. Kotitschke, R. Kimmich, and E. Rommel. "Supercon Fringe-Field NMR Investigation of Diffusion in Molecular Length Scales: Linear Polymers, Networks, and Percolating Clusters of Biopolymer Hydration Shells." In 25th Congress Ampere on Magnetic Resonance and Related Phenomena. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-76072-3_161.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Mikhasev, Gennadi, Ihnat Mlechka, and Holm Altenbach. "Soft Suppression of Traveling Localized Vibrations in Medium-Length Thin Sandwich-Like Cylindrical Shells Containing Magnetorheological Layers via Nonstationary Magnetic Field." In Dynamical Systems: Theoretical and Experimental Analysis. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-42408-8_20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

"Dynamic analysis of functionally graded cylindrical shell with finite length." In Shell Structures: Theory and Applications (Vol. 2). CRC Press, 2009. http://dx.doi.org/10.1201/9780203859766-55.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Najmee, R., and M. Yas. "Dynamic analysis of functionally graded cylindrical shell with finite length." In Shell Structures: Theory and Applications (Vol. 2). CRC Press, 2009. http://dx.doi.org/10.1201/9780203859766.ch47.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Shell length"

1

Adibi-Asl, R., and R. Seshadri. "Decay Length in Pressure Vessels." In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-66135.

Pełny tekst źródła

Streszczenie:

In theory of shell, decay length is defined as the distance affected by localized external (applied loads) or internal (edge effect, discontinuity) forces and moments, beyond which the effect of these loads becomes negligible. The concept of decay length becomes relevant when assessing the interaction effects caused by adjacent discontinuities. In this paper, the decay lengths for several shells geometries, specifically cylindrical, spherical and conical shells, are reviewed. The available expressions for decay lengths in the literature are listed and are compared with finite element analysis

Style APA, Harvard, Vancouver, ISO itp.

2

Ye, R., H. Bahrami, and H. S. Tzou. "Control Effectiveness of Segmented Actuators Laminated on Ring-Shells." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3938.

Pełny tekst źródła

Streszczenie:

Abstract Distributed control effectiveness of ring-shells laminated with segmented actuators is investigated in this paper. A new laminated quadratic piezoelastic triangular shell FE is developed using the layerwise constant shear angle theory. Element and system equations are also derived. The developed piezoelastic triangular shell element is used to model a semi-circular ring shell with various segments of distributed piezoelectric actuators. Finite element (triangular shell FE) solutions are compared with the theoretical, experimental, and finite element first. Natural frequencies and dist

Style APA, Harvard, Vancouver, ISO itp.

3

Zolotarev, Igor. "Vibration and Stability of Cylindrical Shells Containing Flowing Fluid." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39036.

Pełny tekst źródła

Streszczenie:

Natural frequencies and the thresholds for loosing the stability of thin-walled cylindrical shell conveying by flowing fluid are theoretically studied. Potential flow theory for fluid and 3D theory for thin shells are used. The shells of finite length are considered for the different case of boundary conditions at the edges of the shell, and their influence on the critical flow velocities for flutter are demonstrated. The fundamental importance of boundary conditions considered for fixing the edges of the cylindrical shell of finite length is shown. When the clamped - simply supported boundary

Style APA, Harvard, Vancouver, ISO itp.

4

Vaziri, A., H. E. Estekanchi, and H. Nayeb-Hashemi. "Buckling of Cracked Cylindrical Shells With Internal Pressure Subjected to an Axial Load." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32297.

Pełny tekst źródła

Streszczenie:

Cylindrical shells constitute the main structural component in pressure vessels and pipelines. Buckling is one of the main failure considerations when designing these cylindrical shells. Defects such as cracks may develop during manufacturing or service life of these structures. These defects can severely affect their buckling behavior due to high stress field generated around these defects. Finite Element Analyses are performed to study the buckling behavior of cylindrical shells with and without a crack, under various internal pressures. Effects of crack length and its orientation on the buc

Style APA, Harvard, Vancouver, ISO itp.

5

Yuceoglu, U., and V. O¨zerciyes. "Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59766.

Pełny tekst źródła

Streszczenie:

This study is concerned with the “Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment.” The base shell is made of an orthotropic “full” circular cylindrical shell reinforced and/or stiffened by an adhesively bonded dissimilar, orthotropic “full” circular cylindrical shell segment. The stiffening shell segment is located at the mid-center of the composite system. The theoretical analysis is based on the “Timoshenko-Mindlin-(and Reissner) Shell Theory” which is a “First Order Shear Deformation Shell Theory (FSDST).” Thus, in both “

Style APA, Harvard, Vancouver, ISO itp.

6

Surianinov, Mykola, Stepan Neutov, Irina Korneeva, Daria Kirichenko, and Yuliya Danchenko. "Experimental Studies of a Long Cylindrical Shell." In International Scientific Applied Conference "Problems of Emergency Situations". Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-hwar2x.

Pełny tekst źródła

Streszczenie:

The methodology of experimental research of long cylindrical shells to determine their stress-strain state, carrying capacity and crack resistance is proposed. To implement the task, the authors have developed a special stand. Eight cylindrical shell models were made for testing - four of reinforced concrete and four of fiber concrete. Fibro-concrete specimens-shells had additional dispersed reinforcement by steel fiber with bent ends in an amount of 1% by volume of concrete. All specimens-shells had a constant length and cross-sectional radius, and varied the thickness of the shell and the si

Style APA, Harvard, Vancouver, ISO itp.

7

Shih, Hui-Ru, Horn-Sen Tzou, and Wei Zheng. "Photonic Control of a Free-Floating Parabolic Membrane Shell." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41141.

Pełny tekst źródła

Streszczenie:

Communication antennas, optical mirrors, solar/optical reflectors, etc. often have the shape of parabolic shells or shells of revolution, due to their required focusing, aiming, or reflecting performance. In this paper, the wireless control of free-floating flexible parabolic shells using discrete photostrictive actuators is investigated. Parabolic shell of revolution is considered to be one of the most difficult geometry among all shell and non-shell structures. Because of this, an approximate way to estimate the dynamic behavior and light-induced control forces of a photostrictive coupled pa

Style APA, Harvard, Vancouver, ISO itp.

8

Ghorbani Mianroudi, Nasser, Mofid Gorji, and Hessam Taherian. "Experimental Study of Mixed Convection Shell-and-Coil Heat Exchanger." In ASME 2008 Heat Transfer Summer Conference collocated with the Fluids Engineering, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/ht2008-56504.

Pełny tekst źródła

Streszczenie:

In this study the mixed convection heat transfer in a coil-in-shell heat exchanger for various Reynolds numbers, various tube-to-coil diameter ratios and different dimensionless coil pitch was experimentally investigated. The experiments were conducted for both laminar and turbulent flow inside coil. Effects of coil pitch and tube diameters on shell-side heat transfer coefficient of the heat exchanger were studied. Different characteristic lengths were used in various Nusselt number calculations to determine which length best fits the data and several equations were proposed. The particular di

Style APA, Harvard, Vancouver, ISO itp.

9

Gao, Bin, Qincheng Bi, and Zesen Nie. "Effects of Baffle Overlap Proportion on Shell-Side Performance of Shell and Tube Heat Exchanger With Helical Baffles." In ASME 2013 Power Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/power2013-98287.

Pełny tekst źródła

Streszczenie:

Different overlap configurations of discontinuous helical baffles affect the flow pattern of the shell-side fluid directly, and thus there is a significant impact on the flow and heat transfer characteristics of the shell-side fluid. In the present paper, experiments were carried out to study the impact of baffle overlap proportion on the shell-side flow and heat transfer performance of the shell-and-tube heat exchanger with helical baffles (STHEHB). Two different shell-side friction factors, the friction factor per helical pitch (fs,1B) and the friction factor per tube length (fs,1m), were de

Style APA, Harvard, Vancouver, ISO itp.

10

Gunes, Recep, M. Kemal Apalak, and H. Abdullah Tasdemir. "Post-Buckling of Functionally Graded Cylindrical Shells." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41301.

Pełny tekst źródła

Streszczenie:

In this study, the post-buckling analysis of functionally graded cylindrical shells was carried out using the non-linear finite element method. The longitudinal shell edges were hinged under a central transverse concentrated load. The shells were composed of ceramic (Al2O3) and metal (Ni) phases and the mechanical properties at the region between the metal and ceramic layers vary continuously through the shell thickness according to a power-law distribution of the volume fractions of the constituents. The arc-length method was implemented. The effects of material composition and layer number a

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Shell length"

1

Kimura, Mineo. Correlation between shape resonance energies and C-C bond length in carbon-containing molecules: Elastic electron scattering and carbon K-shell excitation by photons. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10159440.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Wilkowski. L51487 Predict the Interaction of Fracture Toughness and Constraint Effects for Surface Cracked Pipe. Pipeline Research Council International, Inc. (PRCI), 1985. http://dx.doi.org/10.55274/r0010596.

Pełny tekst źródła

Streszczenie:

This report summarizes a program designed to quantify the disagreement between the standard t x 2t bend specimen and surface-cracked pipe data. The effect of untracked ligament length on upper-shelf toughness was also investigated. Ultimately, the findings will have application to pipeline girth welds. But in this first step, unwelded line-pipe steel specimens were used throughout this investigation. Obviously, weld metal specimen data would be more directly applicable to welded pipe. However, weld metal test data exhibit more scatter than base metal data (largely due to material non-homogenei

Style APA, Harvard, Vancouver, ISO itp.

3

Friedman, Haya, Julia Vrebalov, James Giovannoni, and Edna Pesis. Unravelling the Mode of Action of Ripening-Specific MADS-box Genes for Development of Tools to Improve Banana Fruit Shelf-life and Quality. United States Department of Agriculture, 2010. http://dx.doi.org/10.32747/2010.7592116.bard.

Pełny tekst źródła

Streszczenie:

Fruit deterioration is a consequence of a genetically-determined fruit ripening and senescence programs, in which developmental factors lead to a climacteric rise of ethylene production in ethylene-sensitive fruits such as tomato and banana. Breeding of tomato with extended fruit shelf life involves the incorporation of a mutation in RIN, a MADS-box transcription factor participating in developmental control signalling of ripening. The RIN mode of action is not fully understood, and it may be predicted to interact with other MADS-box genes to execute its effects. The overall goal of this study

Style APA, Harvard, Vancouver, ISO itp.

4

มนัสไพบูลย์, จุฑา. ประเด็นข้อพิพาทเกี่ยวกับสิทธิและประโยชน์ในข้อตกลงสภาพการจ้าง : รายงานวิจัย. จุฬาลงกรณ์มหาวิทยาลัย, 1985. https://doi.org/10.58837/chula.res.1985.25.

Pełny tekst źródła

Streszczenie:

Workers in Thailand were given the right to organize and the right to bargain collectively in 1972 when the ban imposed since 1958 was revoked. From the date the long-awaited freedom was allowed, thousands of industrial disputes occurred many of which culminated into work stoppages. Collective agreements concluded in the past were arbitrary and did not differentiate clearly as to labour's and management's rights and interests. The purpose of this study is to investigate whether representatives of most union and management in Thailand have become sophisticated enough to have their respective ri

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!