Zaloguj się

Gotowe bibliografie tematyczne / Small-scale manufacture / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Small-scale manufacture.

Artykuły w czasopismach na temat „Small-scale manufacture”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 1 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Small-scale manufacture”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Laird, Trevor. "Continuous Processes in Small-Scale Manufacture." Organic Process Research & Development 11, no. 6 (November 2007): 927. http://dx.doi.org/10.1021/op700233e.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

El-Bakry, M., E. Duggan, E. D. O'Riordan, and M. O'Sullivan. "Small scale imitation cheese manufacture using a Farinograph." LWT - Food Science and Technology 43, no. 7 (September 2010): 1079–87. http://dx.doi.org/10.1016/j.lwt.2010.02.013.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Mahmudova, Nilufar Gulomjonovna. "Value Of Local Resources In Increase Of Potential Of Small-Scale Business And Business." American Journal of Applied sciences 03, no. 04 (April 29, 2021): 111–18. http://dx.doi.org/10.37547/tajas/volume03issue04-15.

Pełny tekst źródła

Streszczenie:

Small-scale business and business has great value in economic potential of each state. Uses of local resources in activity of small-scale business and business provides their efficiency. Possibility of manufacture of the competitive goods is as a result provided. In article on the basis of theoretical and analytical materials the basic directions of increase of efficiency of small-scale business and business with use of local resources are defined.

Style APA, Harvard, Vancouver, ISO itp.

4

Kapoor, R., and L. E. Metzger. "Small-Scale Manufacture of Process Cheese Using a Rapid Visco Analyzer." Journal of Dairy Science 88, no. 10 (October 2005): 3382–91. http://dx.doi.org/10.3168/jds.s0022-0302(05)73022-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Gardiner, Alicia, Paul Daly, Roger Domingo-Roca, James F. C. Windmill, Andrew Feeney, and Joseph C. Jackson-Camargo. "Additive Manufacture of Small-Scale Metamaterial Structures for Acoustic and Ultrasonic Applications." Micromachines 12, no. 6 (May 29, 2021): 634. http://dx.doi.org/10.3390/mi12060634.

Pełny tekst źródła

Streszczenie:

Acoustic metamaterials are large-scale materials with small-scale structures. These structures allow for unusual interaction with propagating sound and endow the large-scale material with exceptional acoustic properties not found in normal materials. However, their multi-scale nature means that the manufacture of these materials is not trivial, often requiring micron-scale resolution over centimetre length scales. In this review, we bring together a variety of acoustic metamaterial designs and separately discuss ways to create them using the latest trends in additive manufacturing. We highligh

Style APA, Harvard, Vancouver, ISO itp.

6

Chen, Chui Xin, and Yang Hong Mao. "Design and Manufacture of Ultra-Small Chip Power Inductor." Advanced Materials Research 705 (June 2013): 359–64. http://dx.doi.org/10.4028/www.scientific.net/amr.705.359.

Pełny tekst źródła

Streszczenie:

Ultra-small Chip Power Inductors play an important role in the new TFT-LCD, OLED and other display equipment and other high-end electronic equipment, there are many problems in the traditional power inductors,design and manufacture the small inductor has a very important significance, from small-scale processing, positioning assembly processing, and combine surface and the point welding processing, a whole forming handle, bulk welding and bulk dispensing processing six aspects in designing and manufacturing, practice has proved that take this design, suitable for mass production, can greatly i

Style APA, Harvard, Vancouver, ISO itp.

7

Zhang, Hua Ling, Takehiko Makino, Kuniaki Dohda, and Jian Cao. "Production of Small Pin by Micro/Meso-Scale Rotary Forming." Materials Science Forum 614 (March 2009): 105–10. http://dx.doi.org/10.4028/www.scientific.net/msf.614.105.

Pełny tekst źródła

Streszczenie:

Micro/meso-scale (from 0.1 to 10mm) metal parts are required in electronics and medical field in recent years. Rotary forming is one of possible methods to manufacture micro axial-symmetry parts. In rotary forming, the materials are rotated and compressed in radial directions. In order to investigate the basic deformation mechanism, flat dies are used. The pins with diameters of 0.3 to 0.8mm are used to clarify the effect of size of pins on deformation behavior. Additionally, the effect of lubrication conditions on the forming process is examined. It is considered that size effects in friction

Style APA, Harvard, Vancouver, ISO itp.

8

Spennemann, Dirk HR. "Bourgeois Aspirations: A biographical sketch of Hector Ledru, manufacturer and inventor (1798 to 1876)." Zeitschrift für Unternehmensgeschichte 62, no. 2 (September 4, 2017): 257–97. http://dx.doi.org/10.1515/zug-2017-1001.

Pełny tekst źródła

Streszczenie:

Abstract:During the first half of the nineteenth century, the French economy underwent a major technological change, with small and medium-scale entrepreneurs driving the industrialisation by developing and exploiting new technologies. This paper examines the life of one such entrepreneur, Hector Ledru (ca. 1798 to 1876), who started out in the sugar industry of the post Napoleonic era. He soon morphed into an entrepreneur exploiting patents in the manufacture of wooden barrel manufacture, galvanised iron and metal pipes, before he settled on the manufacture and installation of central heating

Style APA, Harvard, Vancouver, ISO itp.

9

Sadokha, M. A., and S. L. Rovin. ". Increasing the efficiency of casting manufacture in small-scale and single-unit production." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 3 (October 20, 2020): 10–14. http://dx.doi.org/10.21122/1683-6065-2020-3-10-14.

Pełny tekst źródła

Streszczenie:

Foundry is a multidisciplinary industry of engineering, providing cast blanks from various metals and alloys. The seriality of production has a great impact on the efficiency and quality of the castings being received. Single-unit and small-scale foundry production is an important part of modern engineering. Structural analysis of casting technology is presented in the article, individual technological changes are considered both in terms of impact on the efficiency of casting, and in terms of high quality assurance at minimal cost. Taking into account the need for a single-unit and small-scal

Style APA, Harvard, Vancouver, ISO itp.

10

Almalky, Sumaiah. "Application of HACCP on the small-scale manufacture of a food product (pudding)." FASEB Journal 30 (April 2016): 905.1. http://dx.doi.org/10.1096/fasebj.30.1_supplement.905.1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Emetere, M. E., and S. A. Afolalu. "Challenges of small-scale standalone solar energy supply in parts of Lagos via 39 years dataset." E3S Web of Conferences 294 (2021): 01007. http://dx.doi.org/10.1051/e3sconf/202129401007.

Pełny tekst źródła

Streszczenie:

The adoption of solar energy as a sustainable clean type of energy can be seen globally by the patronage of solar devices. However, the high patronage photovoltaic (PV) module by the small-scale standalone user may be mitigated by the recent high maintenance cost via PV module damages by UV radiation. This study analyzed thirty-nine years (1980-2018) shortwave dataset in the tropics to chart the way forward for PV user, manufacturer, and regulatory organizations. It was observed that there is an increase in shortwave radiation in recent times that has led to more damages to PV modules. However

Style APA, Harvard, Vancouver, ISO itp.

12

Jayanti.G and Dr. V.Selvam. "GST - Sway On Small Scale Industries." Restaurant Business 118, no. 10 (October 18, 2019): 365–72. http://dx.doi.org/10.26643/rb.v118i10.9331.

Pełny tekst źródła

Streszczenie:

India being a democratic and republic country, has witnessed the biggest indirect tax reform after much exploration, GST bill roll out on 1 April 2017. The concept of this reform is for a unified country-wide tax reform system. Enterprises particularly SMEs are caught in a state of instability. Several taxes such s excise, service tax etc., have been subsumed with a single tax structure. it is the responsibilities of both centre and state government to shoulder the important responsibility to cater the needs of the people and the nation as a whole. The main basis of income to the government is

Style APA, Harvard, Vancouver, ISO itp.

13

Ahmed, Noor A., and J. R. Page. "Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology." Applied Mechanics and Materials 397-400 (September 2013): 970–80. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.970.

Pełny tekst źródła

Streszczenie:

The phenomenal growth in three-dimensional printing technology has the potential of ushering in the next wave of industrial revolution. As part of an advanced project design conducted at the Aerospace Engineering of the University of New South, the concept of a printable unmanned aerial vehicle was explored. A subsequent small scale test model was manufactured using three-dimensional printing technology for wind tunnel testing and validation. The exercise demonstrates the huge potential of such printing technology in future aircraft designs.Key words: 3D printing, design, manufacture, UAV

Style APA, Harvard, Vancouver, ISO itp.

14

Hidayat, Dadang Dayat, Arie Sudaryanto, Yose Rizal Kurniawan, Ashri Indriati, and Diang Sagita. "DEVELOPMENT AND EVALUATION OF DRUM COFFEE ROASTING MACHINE FOR SMALL-SCALE ENTERPRISES." INMATEH Agricultural Engineering 60, no. 1 (April 30, 2020): 79–88. http://dx.doi.org/10.35633/inmateh-60-09.

Pełny tekst źródła

Streszczenie:

The design, manufacture and evaluation of a drum coffee roasting machine had been carried out. The aimed of the study was to develop a small-scale drum roaster to meet the demand of the small enterprises at design and function. The development stage consisted of sizing of the main components, creating technical drawings, determination of component materials, manufacture and performance test. The dimension of the roaster drum was 168.28 mm in diameter and 250 mm in length; the capacity of the roaster was 750 gram/ batch. Results of the test determined that the coffee roasting machine had worked

Style APA, Harvard, Vancouver, ISO itp.

15

Martin, Leslie A., Shanthi Nataraj, and Ann E. Harrison. "In with the Big, Out with the Small: Removing Small-Scale Reservations in India." American Economic Review 107, no. 2 (February 1, 2017): 354–86. http://dx.doi.org/10.1257/aer.20141335.

Pełny tekst źródła

Streszczenie:

An ongoing debate in employment policy is whether promoting small and medium enterprises creates jobs. We use the elimination of small-scale industry (SSI) promotion in India to address this question. For 60 years, SSI promotion in India focused on reserving certain products for manufacture by small and medium enterprises. We identify the consequences for employment growth, investment, output, productivity, and wages of dismantling India's SSI reservations. We exploit variation in the timing of de-reservation across products and also measure the long-run impact of national SSI policy changes u

Style APA, Harvard, Vancouver, ISO itp.

16

Hourd, Paul, Amit Chandra, David Alvey, Patrick Ginty, Mark McCall, Elizabeth Ratcliffe, Erin Rayment, and David J. Williams. "Qualification of academic facilities for small-scale automated manufacture of autologous cell-based products." Regenerative Medicine 9, no. 6 (November 2014): 799–815. http://dx.doi.org/10.2217/rme.14.47.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Ficker, Mario, Valentina Paolucci, and Jørn B. Christensen. "Improved large-scale synthesis and characterization of small and medium generation PAMAM dendrimers." Canadian Journal of Chemistry 95, no. 9 (September 2017): 954–64. http://dx.doi.org/10.1139/cjc-2017-0108.

Pełny tekst źródła

Streszczenie:

Dendrimers are promising polymers for biomedical applications; however, most dendrimer formulations have failed to move from laboratory science to upscaled products for preclinical testing or GMP production. This publications reports on an improved large-scale PAMAM dendrimer synthesis that is suitable to manufacture large amounts of highly pure and monodisperse dendrimers of generations G0–G5. Furthermore, an extended analytical guideline how to characterize PAMAM dendrimers with NMR, HPLC, SEC-MALS, ESI, MALDI, UV–vis, fluorescence, and IR spectroscopy is provided.

Style APA, Harvard, Vancouver, ISO itp.

18

Нырков, Д., D. Nyrkov, Александр Стариков, and Aleksandr Starikov. "Analysis of Advanced Algorithms Master Production Schedule for Custom Manufacture of Furniture." Forestry Engineering Journal 7, no. 3 (November 1, 2017): 299–306. http://dx.doi.org/10.12737/article_59c2124049cd45.48567850.

Pełny tekst źródła

Streszczenie:

The article discusses the algorithms employed in automated systems for master production scheduling in the applicability of their produce-to-order furniture. Small batch and custom production of furniture occupies a significant market share, as we do, and in the countries of Western Europe. Also, it is a prospective direction of development for other industries, focused on the end user. Most of the existing national planning systems designed for large-scale and mass production, in which the main role takes enterprise performance. Therefore, the main indicator, which is used by the optimization

Style APA, Harvard, Vancouver, ISO itp.

19

Bligh, A. O., Noor A. Ahmed, and Y. Y. Zheng. "Design and Manufacture of a Planetary Gearbox Rig." Applied Mechanics and Materials 397-400 (September 2013): 176–88. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.176.

Pełny tekst źródła

Streszczenie:

Planetary gearboxes are required in many applications but have a high failure rate especially in wind turbines where rapid growth in turbine size is placing larger demands on the gearboxes. Current condition monitoring techniques are less effective at detecting faults in planetary gearboxes due to the complexity of the internal rotating components. A small scale planetary gearbox was, therefore, needed for testing on a gearbox test rig to develop a more effective method of condition monitoring. The detailed computer design and manufacture of the planetary gearbox for this purpose is detailed i

Style APA, Harvard, Vancouver, ISO itp.

20

Cao, Qi, Xi Ping Feng, Jie Li, and Tao Dong. "Research on the Performance Detecting System of High-Precision Small-Scale Solid Rocket Motor." Advanced Materials Research 346 (September 2011): 804–11. http://dx.doi.org/10.4028/www.scientific.net/amr.346.804.

Pełny tekst źródła

Streszczenie:

According to the performance detecting requirements in development and manufacture of solid rocket motor, a test platform had been set up based on flexible test fixture, a measurement & control platform had been built using virtual instrument technology, a set of solid rocket motor ground test performance detecting software including parameter calibration module, data measurement module and data processing module had been developed based on the LabVIEW7.1, and the solid rocket motor performance detecting system was constructed. The application results through testing normative solid rocket

Style APA, Harvard, Vancouver, ISO itp.

21

Shi, Wen Tian, Yu De Liu, Yue Ding, and Bao An Han. "Manufacture of Micro Gear Shaft Based on Micro Hobbing Technology." Applied Mechanics and Materials 55-57 (May 2011): 494–97. http://dx.doi.org/10.4028/www.scientific.net/amm.55-57.494.

Pełny tekst źródła

Streszczenie:

Micro hobbing technology is an extension of traditional technology in small scale for processing micro gear. The micro gear shaft which module is 0.175mm is processed by micro hobbing technology. The tooth profile of the micro gear shaft is perfect and the tooth is divided evenly, the burr of the edge is small and the surface roughness is high enough to achieve the requirements of the micro gear shaft. In paper, the design of micro gear hob and the micro hobbing technology is the key factor to the manufacture of micro gear and is presented detailed. The result shows micro hobbing is a good way

Style APA, Harvard, Vancouver, ISO itp.

22

Rusli, Mochammad, I. N. G. Wardana, Mochammad Agus Choiron, and Muhammad Aziz Muslim. "Design, Manufacture and Finite Element Analysis of a Small-Scale Ladder-Secondary Double-Sided Linear Induction Motor." Advanced Science Letters 23, no. 5 (May 1, 2017): 4371–77. http://dx.doi.org/10.1166/asl.2017.8853.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Lim, Chae Wook. "Design and manufacture of small-scale wind turbine simulator to emulate torque response of MW wind turbine." International Journal of Precision Engineering and Manufacturing-Green Technology 4, no. 4 (October 2017): 409–18. http://dx.doi.org/10.1007/s40684-017-0046-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Arifin, Maulana, Bambang Wahono, Endro Junianto, and Ari Darmawan Pasek. "Process Manufacture Rotor Radial Turbo-expander for Small Scale Organic Rankine Cycles Using Selective Laser Melting Machine." Energy Procedia 68 (April 2015): 305–10. http://dx.doi.org/10.1016/j.egypro.2015.03.260.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Igboanugo, A. C., and Godwin C. Ovuworie. "Design and Manufacture of Palm Nut/Fibre Separator." Advanced Materials Research 62-64 (February 2009): 671–80. http://dx.doi.org/10.4028/www.scientific.net/amr.62-64.671.

Pełny tekst źródła

Streszczenie:

Sorting of palm nuts from palm fruit cake, a byproduct obtained after palm oil has been extracted from the batch of digested palm fruit, is burdensome especially to small-scale entrepreneurs involved in palm oil processing business in Africa. This paper has triumphed over the perceived difficulties by using the knowledge of processing engineering to design pilot nut/fibre separator that can efficiently and speedily sort out nuts from nut/fibre mesh. Basic design considerations necessary to achieve reliability of the machine are discussed. Performance evaluation data from the machine obtained w

Style APA, Harvard, Vancouver, ISO itp.

26

Ahn, M. C., D. K. Bae, S. E. Yang, D. K. Park, T. K. Ko, C. Lee, B. Y. Seok, and H. M. Chang. "Manufacture and Test of Small-Scale Superconducting Fault Current Limiter by Using the Bifilar Winding of Coated Conductor." IEEE Transactions on Applied Superconductivity 16, no. 2 (June 2006): 646–49. http://dx.doi.org/10.1109/tasc.2006.870522.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Moutlana, Malesela K., and Sarp Adali. "Effects of Elastic Restraints on the Fundamental Frequency of Nonlocal Nanobeams with Tip Mass." Volume 24, No 3, September 2019 24, no. 3 (September 2019): 520–30. http://dx.doi.org/10.20855/ijav.2019.24.31368.

Pełny tekst źródła

Streszczenie:

The fundamental frequencies of an elastically restrained nanobeam with a tip mass are studied based on the nonlocal Euler-Bernoulli beam theory. The nanobeam has a torsional spring at one end and a translational spring at the other end where a tip mass is attached. The aim is to model a tapping mode atomic force microscope (TM-AFM), which can be utilized in imaging and the manufacture of Nano-scale structures. A TM-AFM uses high frequency oscillations to remove material, shape structures or scan the topology of a Nano-scale structure. The nonlocal theory is effective at modelling Nano-scale st

Style APA, Harvard, Vancouver, ISO itp.

28

Quataert, Jean H. "A New View of Industrialization: “Protoindustry” or the Role of Small-Scale, Labor-Intensive Manufacture in the Capitalist Environment." International Labor and Working-Class History 33 (1988): 3–22. http://dx.doi.org/10.1017/s0147547900003306.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Quataert, Jean H. "A New View of Industrialization: “Protoindustry” or the Role of Small-Scale, Labor-Intensive Manufacture in the Capitalist Environment." International Labor and Working-Class History 33 (1988): 3–22. http://dx.doi.org/10.1017/s0147547900004683.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Khaq, Khanifa Nurul, and Lusiawati Dewi. "DETEKSI CEMARAN BAKTERI KOLIFORM DAN Salmonella sp. PADA TEMPE YANG DIKEMAS DAUN PISANG DI DAERAH SALATIGA." Agric 28, no. 1 (January 16, 2017): 79. http://dx.doi.org/10.24246/agric.2016.v28.i1.p79-86.

Pełny tekst źródła

Streszczenie:

<p>ABSTRACT</p><p>Banana leaves-wrapped tempeh is a traditional food as a conventional base of vegetable protein source. Fermented soybeans into tempeh assisted by fungi kind Rhizopusoligosporus, Rhizopusoryzae and Rhizopusstolonifer. Hygiene is very important in the process of fermentation as it will affect the end result of products. Packaging materials can serve as a protective product, but related to the materials used can be the sources of microbial contaminants in food packaging.For small-scale Tempeh industry in Salatiga area commonly use banana leaves to wrap tempeh.T

Style APA, Harvard, Vancouver, ISO itp.

31

J. C. Barrett T W. Hammonds and R. V. Harris. "A TECHNICAL AND ECONOMIC EVALUATION OF A SMALL SCALE COCONUT OIL EXPELLER OPERATION IN THE COOK ISLANDS." CORD 3, no. 02 (June 1, 1987): 34. http://dx.doi.org/10.37833/cord.v3i02.202.

Pełny tekst źródła

Streszczenie:

Small‑scale processing of copra was demonstrated to be technically feasible and potentially very profitable in the Cook Islands using equipment comprising a copra chopper, a screw press and a filter press. At through‑puts close to 65 kg per hour, yields of ciarified oil and copra cake were around 55 per cent and 40 per cent respectively, on a weight basis. A consumer survey indicated that coconut oil could be marketed as a cooking oil to substitute for imported vegetable oils; potential use in soap manufacture was also identified, while copra cake was readily marketed for animal feeding. For

Style APA, Harvard, Vancouver, ISO itp.

32

David, A., G. Williams, David Jenkins, Ian Rigby, and Olwen Williams-Thorpe. "Stone Axe-head Manufacture: New Evidence from the Preseli Hills, West Wales." Proceedings of the Prehistoric Society 61 (1995): 433–60. http://dx.doi.org/10.1017/s0079497x00003169.

Pełny tekst źródła

Streszczenie:

Fieldwork by the Dyfed Archaeological Trust during 1989–92 has identified clear evidence for the manufacture of stone axeheads at two locations on the eastern flanks of the Preseli Mountains, Dyfed: at Glyn-y-Fran, Llanfyrnach (SN 186 307) and near Glandy Cross (SN 143 266). At both sites, small quantities of lithic debris were collected from field surfaces after cultivation; unfortunately, no contemporaneous features were found by subsequent, very limited, trial trenching. In this report we describe the fieldwork at these two sites, and the resulting lithic collection, concluding that the lat

Style APA, Harvard, Vancouver, ISO itp.

33

Makarov, Konstantin, Evgeny Yurchenko, and Elena Yurchenko. "Application of additive technology for the study of resonance oscillations in structures." MATEC Web of Conferences 251 (2018): 04001. http://dx.doi.org/10.1051/matecconf/201825104001.

Pełny tekst źródła

Streszczenie:

The methodic of studying the vibrations of small-sized physical models using additive technology has been developed. The results of the experimental determination of the resonance frequencies for harmonic oscillations and the calculation of the phase shift for two small-scale models of a three-story reinforced concrete building with a nonrigel frame has been presented. It has been shown that the production of models on a 3-D printer makes it possible to reduce the laboriousness of their manufacture, and also to expand the possibilities for accounting of operational defects in buildings and str

Style APA, Harvard, Vancouver, ISO itp.

34

Fan, Yi Hua, Ching En Chen, Wen Wei Fan, and Hung Wen Liao. "Development of a Nanoscale Micro-Machining Machine." Applied Mechanics and Materials 284-287 (January 2013): 707–12. http://dx.doi.org/10.4028/www.scientific.net/amm.284-287.707.

Pełny tekst źródła

Streszczenie:

This paper proposes a novel nano-scale micro-machining machine based on the pantograph mechanism. It is designed to satisfy the need for achieving high accuracy and process efficiency in the manufacture of increasingly small industrial products. The target platform is mounted on a pantograph and small x-y sliders, and is driven by a traditional X-Y platform with common precision. The theoretical and simulation results indicate that the proposed method is feasible for development of a micro-machining machine capable of achieving nano-level precision. In addition, test results indicate that the

Style APA, Harvard, Vancouver, ISO itp.

35

Ahmed, Feroz, and Monimul Haque . "Constraints of Manufacture based Small and Medium Enterprise (SME) Development in Bangladesh." Journal of Social and Development Sciences 1, no. 3 (April 15, 2011): 91–100. http://dx.doi.org/10.22610/jsds.v1i3.632.

Pełny tekst źródła

Streszczenie:

Small and medium enterprises (henceforth, SMEs) play a key role in economic growth and industrial development of a country. They make vital contributions in improving economic and social sectors of a country through stimulating large scale employment, investment, development of indigenous skill and technology, promotion of entrepreneurship and innovativeness, enhancing exports, and also building an industrial base at different scales. SMEs worldwide have been benefited from the combined interactions of forces of product mix, location factors, and market advantages. However, evidences also sugg

Style APA, Harvard, Vancouver, ISO itp.

36

Kim, S. W., J. Namkung, and Ohjoon Kwon. "Manufacture and Industrial Application of Fe-Based Metallic Glasses." Materials Science Forum 706-709 (January 2012): 1324–30. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1324.

Pełny tekst źródła

Streszczenie:

Metallic glass alloys have been considered as attractive materials due to their excellent mechanical and magnetic properties. However, commercial application of metallic glasses has been limited not only because of high production cost, but because of low market demands. A critical production cost factor was raw material since ferrous metallic glasses were made from high purity electrolytic iron. An idea to reduce the cost was to utilize the raw materials which were taken directly from molten iron and steel manufactured at the existing steel plants. Investigations have been performed to find w

Style APA, Harvard, Vancouver, ISO itp.

37

Stone, Nigel A., Wayne Wright, Marty O'Byrne, and Stuart Bow. "Novel Refractory Development for Synthetic Rutile Manufacture via the Becher Process." Advances in Science and Technology 70 (October 2010): 91–101. http://dx.doi.org/10.4028/www.scientific.net/ast.70.91.

Pełny tekst źródła

Streszczenie:

Australia is fortunate in that it has ~80,760 kt (Ti equivalent) representing 15% of the world’s titanium resources in the form of ilmenite, rutile, anatase and leucoxene. Although of late the annual quantity of mined material has reduced due to the global financial situation, the average amount of material mined was of the order of 700 kt (Ti eq). To date the most common process used for beneficiating the ilmenite in Australia has been the Becher process to produce synthetic rutile of the order of 92-96% TiO2. Due to the nature of the mineralogy of the deposits, a very small amount of natural

Style APA, Harvard, Vancouver, ISO itp.

38

Bian, Pei Ying, and Pei Song Bian. "The Research of FMS Scheduling and Simulation." Advanced Materials Research 510 (April 2012): 70–73. http://dx.doi.org/10.4028/www.scientific.net/amr.510.70.

Pełny tekst źródła

Streszczenie:

For making enterprise to flexible manufacturing, some scheduling optimization algorithms are correspondingly designed for the main producing equipments, such as the machine tool, transport vehicles, warehouse work machine and so on. At the same time, VC language is used to develop a simulated procedure of a small-scale workshop. Then these scheduling optimization algorithms are inserted to the simulated procedure. At last a simulated example proves the availability of these algorithms for they can shorten the period of manufacture, improve manufacturing efficiency and achieve the purpose of fl

Style APA, Harvard, Vancouver, ISO itp.

39

D'AMICO, DENNIS J., and CATHERINE W. DONNELLY. "Characterization of Staphylococcus aureus Strains Isolated from Raw Milk Utilized in Small-Scale Artisan Cheese Production." Journal of Food Protection 74, no. 8 (August 1, 2011): 1353–58. http://dx.doi.org/10.4315/0362-028x.jfp-10-533.

Pełny tekst źródła

Streszczenie:

Staphylococcus aureus is an important agent of bacterial mastitis in milking animals and of foodborne intoxication in humans. The purpose of this study was to examine the genetic and phenotypic diversity, enterotoxigenicity, and antimicrobial resistance of S. aureus strains isolated from raw milk used for the production of artisan cheese in Vermont. Cross-tabulations revealed that the 16 ribotypes identified among the 90 milk isolates examined were typically associated with a specific animal species and that more than half of these ribotypes were unique to individual farms. In general, specifi

Style APA, Harvard, Vancouver, ISO itp.

40

Bobin-Vastra, I., M. Febvre, P. Lorenzetto, Y. Bouveret, D. Cauvin, G. Raisson, and D. Conchon. "Manufacture and first wall joining for an ITER primary wall module prototype: R&D phase with small scale mock-ups." Fusion Engineering and Design 56-57 (October 2001): 261–66. http://dx.doi.org/10.1016/s0920-3796(01)00297-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Kalinichenko, M. L., L. P. Dolgiy, and U. A. Kalinichenko. "Analysis of modern composite materials used in the manufacture of model kits for small-scale foundry production, obtained using bonding technology." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 3 (October 20, 2020): 15–22. http://dx.doi.org/10.21122/1683-6065-2020-3-15-22.

Pełny tekst źródła

Streszczenie:

The article presents modern data on the materials used to create model kits, the method of their installation for use on any foundries, specializing in the repair and creation of castings by experimental or small-scale batches. The analysis of the used materials, adhesive compositions for their fastening, as well as economic indicators of the costs necessary for their production was made. The properties of glued joints used for manufacturing components of model kits from plastics and its combinations with metal parts are shown.

Style APA, Harvard, Vancouver, ISO itp.

42

Liu, Bing, Peng Zhu, Anchang Xu, and Limin Bao. "Investigation of the recycling of continuous fiber-reinforced thermoplastics." Journal of Thermoplastic Composite Materials 32, no. 3 (February 18, 2018): 342–56. http://dx.doi.org/10.1177/0892705718759388.

Pełny tekst źródła

Streszczenie:

There is limited information on the recycling of continuous fiber-reinforced thermoplastics (FRTPs). Furthermore, existing research has been conducted in laboratories on a very small scale. In this article, we propose an effective and simple technology for recycling of FRTPs, which can be conducted on a large scale. To accelerate the rate of resin dissolution, prepared FRTPs were cut into small pieces. The obtained pieces were used to manufacture recycled chopped fabric tape-reinforced thermoplastics (R-CTTs). The feasibility of the recycling technology was confirmed by comparing the mechanica

Style APA, Harvard, Vancouver, ISO itp.

43

Vranić, Edina. "Recent advances in the identification and prediction of polymorphs." Bosnian Journal of Basic Medical Sciences 3, no. 3 (August 20, 2003): 32–36. http://dx.doi.org/10.17305/bjbms.2003.3525.

Pełny tekst źródła

Streszczenie:

An increased understanding of the phenomenon of polymorphism should enable pharmaceutical scientists to gain control over the crystallization process in order to selectively obtain the desired polymorph or suppress the growth of an undesired one. Phase changes during processing and scale-up are a problem, which may be avoided by carefully designed initial small-scale studies. The availability of detailed structural data, combined with strategic design of substrates and additives, has led to significant advances in the control over the polymorphs obtained in a particular crystallization. With a

Style APA, Harvard, Vancouver, ISO itp.

44

Korotchenko, A. Yu, D. E. Khilkov, M. V. Tverskoy, and A. A. Khilkova. "Research of 3D Printing Modes of Feedstock for Metal Injection Molding." Materials Science Forum 992 (May 2020): 461–66. http://dx.doi.org/10.4028/www.scientific.net/msf.992.461.

Pełny tekst źródła

Streszczenie:

In this work, to reduce the cost of production of parts using injection molding metal technology (MIM technology), it is proposed to use additive technologies (AT) for the manufacture of green parts. The use of AT allows us to abandon expensive molds and expand the field of use of the MIM of technology in single and small-scale production. For manufacture of green parts, the technology of manufacturing fused filament (Fused Filament Fabrication – FFF) is offered. The original composition of the metal powder mix (feedstock) and the filament manufacturing modes for 3D printing have been develope

Style APA, Harvard, Vancouver, ISO itp.

45

Ikimi, J. A., W. E. Odinikuku, and T. B. Adeleke. "A Survey of Factors on Design for Manufacture of Chemical Fertilizer Granulating Machine." European Journal of Engineering and Technology Research 6, no. 4 (June 25, 2021): 124–28. http://dx.doi.org/10.24018/ejers.2021.6.4.2467.

Pełny tekst źródła

Streszczenie:

The design for manufacturing of granulating machines to produce fertilizer granules in small scale using locally available materials is often challenging and this results in low fertilizer usage among Nigerian farmers when compared with the world’s average usage. A lot of factors are associated with chemical fertilizer granulating machine, and it is necessary to examine and understand the interplay among these factors. This study weighs up a number of variables that relates with the design and usage of chemical fertilizer granulating machine and offers increased insight and awareness about the

Style APA, Harvard, Vancouver, ISO itp.

46

Dehaeck, Sam, Marco Cavaiani, Adam Chafai, Youness Tourtit, Youen Vitry, and Pierre Lambert. "Hybrid Two-Scale Fabrication of Sub-Millimetric Capillary Grippers." Micromachines 10, no. 4 (March 29, 2019): 224. http://dx.doi.org/10.3390/mi10040224.

Pełny tekst źródła

Streszczenie:

Capillary gripping is a pick-and-place technique that is particularly well-suited for handling sub-millimetric components. Nevertheless, integrating a fluid supply and release mechanism becomes increasingly difficult to manufacture for these scales. In the present contribution, two hybrid manufacturing procedures are introduced in which the creation of the smallest features is decoupled from the macro-scale components. In the first procedure, small scale features are printed directly (by two-photon polymerisation) on top of a 3D-printed device (through stereolithography). In the second approac

Style APA, Harvard, Vancouver, ISO itp.

47

Khan, Nasir. "AN ANALYSIS OF THE APPLICATION OF AGILE MANUFACTURING IN MEDIUM SCALE MANUFACTURING INDUSTRY." International Journal of Engineering Technologies and Management Research 5, no. 2 (May 4, 2020): 355–62. http://dx.doi.org/10.29121/ijetmr.v5.i2.2018.667.

Pełny tekst źródła

Streszczenie:

To compete effectively in the global marketplace of the twenty-first century, manufacturing companies are trying to maintain a high level of flexibility and responsiveness to achieve agility and to remain competitive. Manufacturers are under tremendous pressure to improve productivity and quality while reducing costs. The new competition is in terms of reduced cost, improved quality products with higher performance, a wider range of products and better services all delivered simultaneously to enhance value to customers. In such environment providing good quality product at low cost for a mediu

Style APA, Harvard, Vancouver, ISO itp.

48

De Groote, Hugo, Bernard Munyua, Djibril Traore, John R. N. Taylor, Mario Ferruzzi, Cheikh Ndiaye, Isiguzoro O. Onyeoziri, and Bruce R. Hamaker. "Measuring consumer acceptance of instant fortified millet products using affective tests and auctions in Dakar, Senegal." International Food and Agribusiness Management Review 24, no. 3 (April 13, 2021): 499–522. http://dx.doi.org/10.22434/ifamr2020.0068.

Pełny tekst źródła

Streszczenie:

Small-scale affordable extruders create new opportunities for small enterprise food processors to manufacture nutritionally enhanced products. Still, consumer interest in these products needs to be assessed first. Affective tests with 296 consumers in Dakar, Senegal, evaluated five pearl millet flours: (a) conventional, compared to four instant-porridge flour products; (b) sifted; (c) wholegrain; (d) sifted with premix; (e) wholegrain with micronutrient premix and food-to-food fortified (FtFF). Willingness-to-pay (WTP) was elicited through experimental auctions under two treatments: firstly wi

Style APA, Harvard, Vancouver, ISO itp.

49

Nicholls, Alexander J., and Ian R. Baxendale. "Benzo[1,2,3]dithiazole Compounds: A History of Synthesis and Their Renewed Applicability in Materials and Synthetic Chemistry, Originating from the Herz Reaction." Reactions 2, no. 3 (June 29, 2021): 175–208. http://dx.doi.org/10.3390/reactions2030013.

Pełny tekst źródła

Streszczenie:

The benzo[1,2,3]dithiazole is a unique heteroaromatic functionality whose conjugated profile instils some fascinating electronic properties. This has been historically recognized in the design and manufacture of organic dyes early last century. Although, with the benefit of increased diagnostic techniques and improved understanding, these structures are attracting greater attention in additional research settings, including applications as organic radicals and semiconductors. In addition, the benzodithiazole functionality has been shown to be a valuable synthetic intermediate in the preparatio

Style APA, Harvard, Vancouver, ISO itp.

50

McIntyre, Irene, Michael O'Sullivan, and Dolores O'Riordan. "Monitoring the progression of calcium and protein solubilisation as affected by calcium chelators during small-scale manufacture of casein-based food matrices." Food Chemistry 237 (December 2017): 597–604. http://dx.doi.org/10.1016/j.foodchem.2017.05.149.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!