Zaloguj się

Gotowe bibliografie tematyczne / Split tensile strength and Flexural strength / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Split tensile strength and Flexural strength.

Rozprawy doktorskie na temat „Split tensile strength and Flexural strength”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 25 najlepszych rozpraw doktorskich naukowych na temat „Split tensile strength and Flexural strength”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Yin, Penghai. "Tensile Strength of Unsaturated Soils." Thesis, Université d'Ottawa / University of Ottawa, 2021. http://hdl.handle.net/10393/41841.

Pełny tekst źródła

Streszczenie:

Desiccation-induced soil cracking is of significant interest in several engineering disciplines, which include geotechnical and geoenvironmental engineering, mining engineering, and agriculture engineering. The hydraulic, mechanical, thermal and other physico-chemical properties of unsaturated soils can be predominantly influenced due to cracks. Reliable information of these properties is required for the rational design and maintenance of earth structures taking account of the influence the soil-atmosphere interactions (e.g., for expansive soil slopes, earth dams, and embankments). In spite o

Style APA, Harvard, Vancouver, ISO itp.

2

Roth, Michael Jason 1975. "Flexural and tensile properties of thin, very high-strength, fiber-reinforced concrete panels." Master's thesis, Mississippi State : Mississippi State University, 2007. http://library.msstate.edu/etd/show.asp?etd=etd-11062007-215816.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Brahmachari, Koushik, of Western Sydney Hawkesbury University, of Science Technology and Agriculture Faculty, and School of Construction and Building Sciences. "Connection and flexural behaviour of steel RHS filled with high strength concrete." THESIS_FTA_CBS_BRAHMACHARI_K.xml, 1997. http://handle.uws.edu.au:8081/1959.7/526.

Pełny tekst źródła

Streszczenie:

Steel hollow section members filled with concrete have been frequently used in recent construction industry as columns and beams and beam-columns because of their superior performance and constructability. Previous research demonstrated that such system has large energy absorption capacity which is critical in the event of an earthquake. By filling steel RHS with concrete, the failure of the steel shell due to local buckling can be delayed and the ductility of the concrete core can be improved as a result of the confinement of the steel shell. This type of composite section may be used in vari

Style APA, Harvard, Vancouver, ISO itp.

4

Owens, Anthony Taylor Tippur Hareesh V. "Development of a split Hopkinson tension bar for testing stress-strain response of particulate composites under high rates of loading." Auburn, Ala., 2007. http://repo.lib.auburn.edu/Send%2002-04-08/OWENS_ANTHONY_54.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Brahmachari, Koushik. "Connection and flexural behaviour of steel RHS filled with high strength concrete." Thesis, View thesis, 1997. http://handle.uws.edu.au:8081/1959.7/526.

Pełny tekst źródła

Streszczenie:

Steel hollow section members filled with concrete have been frequently used in recent construction industry as columns and beams and beam-columns because of their superior performance and constructability. Previous research demonstrated that such system has large energy absorption capacity which is critical in the event of an earthquake. By filling steel RHS with concrete, the failure of the steel shell due to local buckling can be delayed and the ductility of the concrete core can be improved as a result of the confinement of the steel shell. This type of composite section may be used in vari

Style APA, Harvard, Vancouver, ISO itp.

6

Phillips, Lakin N. "Evaluation of Ohio Coal as Filler Material for Thermoplastic Composites." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1512564409202248.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Bandi, Raghava. "Effect of Surface Treatment on the Performance of CARALL, Carbon Fiber Reinforced Aluminum Dissimilar Material Joints." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011869/.

Pełny tekst źródła

Streszczenie:

Fiber-metal laminates (FML) are the advanced materials that are developed to improve the high performance of lightweight structures that are rapidly becoming a superior substitute for metal structures. The reasons behind their emerging usage are the mechanical properties without a compromise in weight other than the traditional metals. The bond remains a concern. This thesis reviews the effect of pre-treatments, say heat, P2 etch and laser treatments on the substrate which modifies the surface composition/roughness to impact the bond strength. The constituents that make up the FMLs in our pres

Style APA, Harvard, Vancouver, ISO itp.

8

Alat, Ece. "Analysis Of Magnesium Addition, Hydrogen Porosity And T6 Heat Treatment Effecrts On Mechanical And Microstructural Properties Of Pressure Die Cast 7075 Aluminum Alloy." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12615018/index.pdf.

Pełny tekst źródła

Streszczenie:

Aluminum alloys are having more attention due to their high specific stiffness and processing advantages. 7075 aluminum alloy is a wrought composition aluminum alloy in the Al-Zn-Mg-Cu series. Due to the significant addition of these alloying elements, 7075 has higher strength compared to all other aluminum alloys and effective precipitation hardenability characteristic. On the other hand, aluminum alloys have some drawbacks, which hinder the widespread application of them. One of the most commonly encountered defects in aluminum alloys is the hydrogen porosity. Additionally, in case of 7075,

Style APA, Harvard, Vancouver, ISO itp.

9

Zhang, Xuesong, and n/a. "Punching Shear Failure Analysis of Reinforced Concrete Flat Plates Using Simplified Ust Failure Criterion." Griffith University. School of Engineering, 2003. http://www4.gu.edu.au:8080/adt-root/public/adt-QGU20051104.153239.

Pełny tekst źródła

Streszczenie:

Failure criteria play a vital role in the numerical analysis of reinforced concrete structures. The current failure criteria can be classified into two types, namely the empirical and theoretical failure criteria. Empirical failure criteria normally lack reasonable theoretical backgrounds, while theoretical ones either involve too many parameters or ignore the effects of intermediate principal stress on the concrete strength. Based on the octahedral shear stress model and the concrete tensile strength under the state of triaxial and uniaxial stress, a new failure criterion, that is, the simpli

Style APA, Harvard, Vancouver, ISO itp.

10

Zhang, Xuesong. "Punching Shear Failure Analysis of Reinforced Concrete Flat Plates Using Simplified Ust Failure Criterion." Thesis, Griffith University, 2003. http://hdl.handle.net/10072/365777.

Pełny tekst źródła

Streszczenie:

Failure criteria play a vital role in the numerical analysis of reinforced concrete structures. The current failure criteria can be classified into two types, namely the empirical and theoretical failure criteria. Empirical failure criteria normally lack reasonable theoretical backgrounds, while theoretical ones either involve too many parameters or ignore the effects of intermediate principal stress on the concrete strength. Based on the octahedral shear stress model and the concrete tensile strength under the state of triaxial and uniaxial stress, a new failure criterion, that is, the simpli

Style APA, Harvard, Vancouver, ISO itp.

11

Mondo, Eleonora. "Shear Capacity of Steel Fibre Reinforced Concrete Beams without Conventional Shear Reinforcement." Thesis, KTH, Bro- och stålbyggnad, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-41016.

Pełny tekst źródła

Streszczenie:

While the increase in shear strength of Steel Fibre Reinforced Concrete (SFRC) is well recognized, it has yet to be found common application of this material in building structures and there is no existing national standard that treats SFRC in a systematic manner. The aim of the diploma work is to investigate the shear strength of fibre reinforced concrete beams and the available test data and analyse the latter against the mostpromising equations available in the literature. The equations investigated are:Narayanan and Darwish’s formula, the German, the RILEM and the Italian guidelines. Thirt

Style APA, Harvard, Vancouver, ISO itp.

12

Ajaxon, Ingrid. "Can Bone Void Fillers Carry Load? : Behaviour of Calcium Phosphate Cements Under Different Loading Scenarios." Doctoral thesis, Uppsala universitet, Tillämpad materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-316656.

Pełny tekst źródła

Streszczenie:

Calcium phosphate cements (CPCs) are used as bone void fillers and as complements to hardware in fracture fixation. The aim of this thesis was to investigate the possibilities and limitations of the CPCs’ mechanical properties, and find out if these ceramic bone cements can carry application-specific loads, alone or as part of a construct. Recently developed experimental brushite and apatite cements were found to have a significantly higher strength in compression, tension and flexion compared to the commercially available CPCs chronOS™ Inject and Norian® SRS®. By using a high-resolution measu

Style APA, Harvard, Vancouver, ISO itp.

13

Zanella, Andrigo Kemel. "ANÁLISE DAS PROPRIEDADES MECÂNICAS DE CONCRETOS PARA PAVIMENTAÇÃO EMPREGANDO DIFERENTES PROCESSOS DE CURA." Universidade Federal de Santa Maria, 2014. http://repositorio.ufsm.br/handle/1/7861.

Pełny tekst źródła

Streszczenie:

To develop a project sizing concrete pavement is necessary to know the mechanical properties and the different treatment processes of material to be used. This study aimed to analyze the mechanical properties such as flexural strenght, compressive strength, indirect tensile strength and static modulus of concrete paving. The three types of concrete were studied: An actual reference (typically used in paving, one with the addition of polypropylene fibers (common practice for floors), and a high strength concrete used to rapidly release the traffic. Different methods of curing were applied: chem

Style APA, Harvard, Vancouver, ISO itp.

14

Dolamune, Kankanamge Nirosha. "Structural behaviour and design of cold-formed steel beams at elevated temperatures." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/33221/1/Nirosha_Dolamune_Kankanamge_Thesis.pdf.

Pełny tekst źródła

Streszczenie:

Cold-formed steel members are extensively used in the building construction industry, especially in residential, commercial and industrial buildings. In recent times, fire safety has become important in structural design due to increased fire damage to properties and loss of lives. However, past research into the fire performance of cold-formed steel members has been limited, and was confined to compression members. Therefore a research project was undertaken to investigate the structural behaviour of compact cold-formed steel lipped channel beams subject to inelastic local buckling and yieldi

Style APA, Harvard, Vancouver, ISO itp.

15

Plochý, Ondřej. "Vývoj sklobetonů s vysokými mechanickými vlastnostmi." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371943.

Pełny tekst źródła

Streszczenie:

This master thesis summarizes the current knowledge regarding the design and properties of glass fiber reinforced concrete products. It also deals with the design of a new concrete recipe for Dako spol. s.r.o company. There is verified effect of changes in input materials in real conditions the company to increase tensile bending strength above 20 MPa.In particular, verification of the use of building chemistry like superplasticizing additives, polymer-cement matrix or a change type or dose of glass fiber.

Style APA, Harvard, Vancouver, ISO itp.

16

Fabiánová, Lucie. "Přepočet a variantní návrh nosných konstrukcí objektů administrativního centra." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226643.

Pełny tekst źródła

Streszczenie:

The aim of this thesis was to develop assessments of existing supporting structure of a rectangular object and design of new options for rectangular and cylindrical object administrative center in the Jihomoravská plynárenská, a.s. in Brno. According to the task have been recalculated construction and design of new structures in accordance with applicable standards. New design of both buildings (rectangular and cylindrical) came from several studies.

Style APA, Harvard, Vancouver, ISO itp.

17

Islam, Mohammad Saiful. "The Influence of Fibre Processing and Treatments on Hemp Fibre/Epoxy and Hemp Fibre/PLA Composites." The University of Waikato, 2008. http://hdl.handle.net/10289/2627.

Pełny tekst źródła

Streszczenie:

In recent years, due to growing environmental awareness, considerable attention has been given to the development and production of natural fibre reinforced polymer (both thermoset and thermoplastic) composites. The main objective of this study was to reinforce epoxy and polylactic acid (PLA) with hemp fibre to produce improved composites by optimising the fibre treatment methods, composite processing methods, and fibre/matrix interfacial bonding. An investigation was conducted to obtain a suitable fibre alkali treatment method to: (i) remove non-cellulosic fibre components such as lignin (sen

Style APA, Harvard, Vancouver, ISO itp.

18

Baumgarten, Lars. "Gesteinsmechanische Versuche und petrophysikalische Untersuchungen – Laborergebnisse und numerische Simulationen." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-202612.

Pełny tekst źródła

Streszczenie:

Dreiaxiale Druckprüfungen können als Einstufenversuche, als Mehrstufenversuche oder als Versuche mit kontinuierlichen Bruchzuständen ausgeführt werden. Bei der Anwendung der Mehrstufentechnik ergeben sich insbesondere Fragestellungen hinsichtlich der richtigen Wahl des Umschaltpunktes und des optimalen Verlaufs des Spannungspfades zwischen den einzelnen Versuchsstufen. Fraglich beim Versuch mit kontinuierlichen Bruchzuständen bleibt, ob im Versuchsverlauf tatsächlich Spannungszustände erfasst werden, welche die Höchstfestigkeit des untersuchten Materials repräsentieren. Die Dissertation greift

Style APA, Harvard, Vancouver, ISO itp.

19

Dai, Feng Jr. "Dynamic Tensile, Flexural and Fracture Tests of Anisotropic Barre Granite." Thesis, 2010. http://hdl.handle.net/1807/26141.

Pełny tekst źródła

Streszczenie:

Granitic rocks usually exhibit strongly anisotropy due to pre-existing microcracks induced by long-term geological loadings. The understanding of anisotropy in mechanical properties of rocks is critical to a variety of rock engineering applications. In this thesis, the anisotropy of tension-related failure parameters involving tensile strength, flexural strength and Mode-I fracture toughness/fracture energy of Barre granite is investigated under a wide range of loading rates. Three sets of dynamic experimental methodologies have been developed using the modified split Hopkinson pressure bar sy

Style APA, Harvard, Vancouver, ISO itp.

20

Heffler, Leesa. "Variability of unit flexural bond strength and its effect on strength in clay brick unreinforced masonry walls subject to vertical bending." Thesis, 2010. http://hdl.handle.net/1959.13/45180.

Pełny tekst źródła

Streszczenie:

Masters Research - Master of Philospohy (MPhil)<br>It has been shown that masonry material properties, in particular, unit flexural bond strength (ft), vary significantly throughout masonry structures, despite the fact that often only one type of brick and mortar are used. Unit flexural bond strength was previously identified as one of the most important material parameters contributing to the strength of clay brick unreinforced masonry (URM) walls in flexure. It was the objectives of this research, in the context of clay brick URM walls subject to vertical bending, to examine how unit flexura

Style APA, Harvard, Vancouver, ISO itp.

21

Heffler, Leesa. "Variability of unit flexural bond strength and its effect on strength in clay brick unreinforced masonry walls subject to vertical bending." 2010. http://hdl.handle.net/1959.13/45180.

Pełny tekst źródła

Streszczenie:

Masters Research - Master of Philospohy (MPhil)<br>It has been shown that masonry material properties, in particular, unit flexural bond strength (ft), vary significantly throughout masonry structures, despite the fact that often only one type of brick and mortar are used. Unit flexural bond strength was previously identified as one of the most important material parameters contributing to the strength of clay brick unreinforced masonry (URM) walls in flexure. It was the objectives of this research, in the context of clay brick URM walls subject to vertical bending, to examine how unit flexura

Style APA, Harvard, Vancouver, ISO itp.

22

Posritong, Sumana 1974. "Effect of Hydrofluoric Acid Etching Followed by Unfilled Resin Application on the Biaxial Flexural Strength of a Glass-based Ceramic." Thesis, 2012. http://hdl.handle.net/1805/3180.

Pełny tekst źródła

Streszczenie:

Indiana University-Purdue University Indianapolis (IUPUI)<br>Background: Numerous studies have reported the use of hydrofluoric (HF) acid as one of the most effective methods for the achievement of a durable bond between glass-based ceramics and resin cements. Nevertheless, there is little information available regarding the potential deleterious effect on the ceramic mechanical strength. Objectives: (1) to investigate the effect of HF acid etching regimens on the biaxial flexural strength of a low-fusing nanofluorapatite glass-ceramic (IPS e.max ZirPress, Ivoclar Vivadent), (2) to study the a

Style APA, Harvard, Vancouver, ISO itp.

23

Semeralul, Hamid Osman. "Advancing the technology development for better quality wood plastic composites: process ability study." Thesis, 2009. http://hdl.handle.net/10155/21.

Pełny tekst źródła

Streszczenie:

Wood Plastic Composites (WPC) have advantages over natural wood such as improved stiffness, recyclability, and waste minimization. However, issues such as the difficulty of processing WPC with conventional methods, volatile emission from the wood and the composites’ lack of strength must be addressed. A system for continuous extrusion of rectangular profiles of WPC was developed and some critical processing strategies were identified. The use of a lubricant and a calibrator also improved the profile extrusion of WPC. In this work, glass was also added to improve WPC’s mechanical strength. Gene

Style APA, Harvard, Vancouver, ISO itp.

24

Riaz, Muhammad. "Characterization of Corn Fibres for Manufacturing Automotive Plastic Parts." Thesis, 2012. http://hdl.handle.net/10214/5207.

Pełny tekst źródła

Streszczenie:

The study examined the properties of stalk and cob fibres from recombinant inbred corn lines and their parents, grown at two locations, in a polylactic acid (PLA) matrix. The objectives were to: determine fibre compositions; evaluate the effects of fibres on the functional properties of biocomposites and identify quantitative trait loci (QTLs) and gene markers for fibre performance in biocomposites. Significant Genotype*Location effects were observed. Composites had lower strength (impact, tensile, and flexural) but higher tensile/flexural modulus values than pure PLA. The latter were positiv

Style APA, Harvard, Vancouver, ISO itp.

25

Baumgarten, Lars. "Gesteinsmechanische Versuche und petrophysikalische Untersuchungen – Laborergebnisse und numerische Simulationen." Doctoral thesis, 2015. https://tubaf.qucosa.de/id/qucosa%3A23031.

Pełny tekst źródła

Streszczenie:

Dreiaxiale Druckprüfungen können als Einstufenversuche, als Mehrstufenversuche oder als Versuche mit kontinuierlichen Bruchzuständen ausgeführt werden. Bei der Anwendung der Mehrstufentechnik ergeben sich insbesondere Fragestellungen hinsichtlich der richtigen Wahl des Umschaltpunktes und des optimalen Verlaufs des Spannungspfades zwischen den einzelnen Versuchsstufen. Fraglich beim Versuch mit kontinuierlichen Bruchzuständen bleibt, ob im Versuchsverlauf tatsächlich Spannungszustände erfasst werden, welche die Höchstfestigkeit des untersuchten Materials repräsentieren. Die Dissertation greift

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!