Zaloguj się

Gotowe bibliografie tematyczne / Thin layer drying model / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Thin layer drying model.

Rozprawy doktorskie na temat „Thin layer drying model”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 19 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 18 najlepszych rozpraw doktorskich naukowych na temat „Thin layer drying model”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Coelho, Karen Dias. "Secagem de tomate (Lycorpesicon esculentum Mill) em camada delgada: avaliação das características físico-químicas." reponame:Repositório Institucional da FURG, 2010. http://repositorio.furg.br/handle/1/2953.

Pełny tekst źródła

Streszczenie:

Dissertação(mestrado) - Universidade Federal do Rio Grande, Programa de Pós-Graduação em Engenharia e Ciência de Alimentos, Escola que Química e Alimentos, 2010.<br>Submitted by Caroline Silva (krol_bilhar@hotmail.com) on 2012-08-13T20:09:02Z No. of bitstreams: 1 karen.pdf: 1201665 bytes, checksum: 029db9988527cfe9b943b9a5f0b24c2f (MD5)<br>Approved for entry into archive by Bruna Vieira(bruninha_vieira@ibest.com.br) on 2012-12-06T04:50:59Z (GMT) No. of bitstreams: 1 karen.pdf: 1201665 bytes, checksum: 029db9988527cfe9b943b9a5f0b24c2f (MD5)<br>Made available in DSpace on 2012-12-06T04:50:59Z

Style APA, Harvard, Vancouver, ISO itp.

2

Reuter, Sabrina [Verfasser]. "Model Calculations for Characterisation and Implementation of Vertical Thin-Layer Structures with Distributed Cavity Mode for Filter and Laser Applications / Sabrina Reuter." Kassel : Universitätsbibliothek Kassel, 2018. http://d-nb.info/115869279X/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Medhekar, Vinay S. "Growth of carbon nanotubes on model and supported catalysts." Link to electronic thesis, 2004. http://www.wpi.edu/Pubs/ETD/Available/etd-0820104-115115/.

Pełny tekst źródła

Streszczenie:

Dissertation (Ph.D.)--Worcester Polytechnic Institute.<br>Keywords: supported catalyst; spin coating; atomic layer deposition; carbon nanotubes; model catalyst; ferrocene; thin film coating. Includes bibliographical references. (p.256-258)

Style APA, Harvard, Vancouver, ISO itp.

4

Travailleur, Lucy. "Composites mortier-polymère en couche mince : impact du séchage et de la colonisation microbienne." Thesis, Paris Est, 2019. http://www.theses.fr/2019PESC2040.

Pełny tekst źródła

Streszczenie:

Les matériaux composites mortier-polymère sont largement utilisés dans l’industrie pour des applications de protection et/ou de réparation de surfaces en béton. En effet, l’ajout de polymère dans les formulations de mortier permet de modifier les propriétés de ces matériaux, en particulier en favorisant leur adhésion tout en réduisant leur perméabilité. Cependant, les études menées sur ces matériaux ne prennent pas en compte les conditions d’application rencontrées sur chantier. En effet, elles sont généralement réalisées sur des pièces massives, alors qu’en réalité ces matériaux sont appliqué

Style APA, Harvard, Vancouver, ISO itp.

5

Nguyen, Trung Dung. "Experimental and numerical investigation of strain-rate dependent mechanical properties of single living cells." Thesis, Queensland University of Technology, 2015. https://eprints.qut.edu.au/82791/1/Trung%20Dung_Nguyen_Thesis.pdf.

Pełny tekst źródła

Streszczenie:

The objective of this project is to investigate the strain-rate dependent mechanical behaviour of single living cells using both experimental and numerical techniques. The results revealed that living cells behave as porohyperlastic materials and that both solid and fluid phases within the cells play important roles in their mechanical responses. The research reported in this thesis provides a better understanding of the mechanisms underlying the cellular responses to external mechanical loadings and of the process of mechanical signal transduction in living cells. It would help us to enhance

Style APA, Harvard, Vancouver, ISO itp.

6

Sommer, Oliver. "Ein Beitrag zur Untersuchung des Verhaltens dünner Flüssigkeitsfilme nahe gekrümmten Substratoberflächen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-154946.

Pełny tekst źródła

Streszczenie:

In der vorliegenden Arbeit wurde das Verhalten dünner Flüssigkeitsfilme an gekrümmten Substratoberflächen durch experimentelle Beschichtungsversuche basierend auf der non-invasiven laserinduzierten Fluoreszenzmesstechnik und durch numerische Filmsimulationen mit Hilfe des Volume-of-Fluid Mehrphasenmodells untersucht. Besonderes Interesse galt dabei dem Finden optimaler Einflussgrößenkombinationen zur Reduzierung des Fettkanten-Effekts. In der hierfür durchgeführten Parameterstudie wurden sowohl Applikationsparameter wie der Kantenrundungsradius und die Applikationsschichtdicke als auch Stoffpa

Style APA, Harvard, Vancouver, ISO itp.

7

Ghemmour, Assia. "Ecoulements à surface libre de fluides à seuil : rhéométrie et validation des caractéristiques hydrauliques dans un canal à fond mobile. Application aux laves torrentielles." Thesis, Grenoble, 2011. http://www.theses.fr/2011GRENI060/document.

Pełny tekst źródła

Streszczenie:

Cette thèse présente une étude expérimentale visant à caractériser les propriétés hydrauliquesd'écoulements à surface libre de fluides complexes: fluides viscoplastiques et mélangesfluides viscoplastiques-grains. Ce travail est motivé par la nécessité d'améliorer lesconnaissances sur les propriétés des écoulements de laves torrentielles, dans un contexte deprotection contre les risques naturels en montagne. Nous avons développé un dispositif delaboratoire original, un canal à fond mobile, permettant de générer des coulées gravitaires quisont globalement stationnaires dans le référentiel du lab

Style APA, Harvard, Vancouver, ISO itp.

8

Meziane, Bilel. "Film thickness build-up in highly loaded lubricated contacts under Zero Entrainment Velocity condition." Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI005.

Pełny tekst źródła

Streszczenie:

Les contacts lubrifiés sous forte charge sont souvent étudiés dans des conditions de roulement/glissement. Dans ces cas, l’entrainement du lubrifiant dans un coin d’huile explique la présence d’un film séparateur. Cependant, il existe un certain nombre d’applications dans lesquelles les surfaces en contact ont des vitesses égales et opposées. Cela correspond à une vitesse d’entrainement (définie comme la moyenne des vitesses des deux surfaces) nulle. Dans ce cas, les modèles prédictifs de la littérature ne peuvent plus s’appliquer. Dans ce mémoire de thèse, les phénomènes physiques conduisant

Style APA, Harvard, Vancouver, ISO itp.

9

Hordequin, Chantal. "Le demi-métal NiMnSb : étude des propriétés magnétiques et de transport et réalisation de vannes de spin." Grenoble INPG, 1997. http://www.theses.fr/1997INPG0050.

Pełny tekst źródła

Streszczenie:

La phase d'heusler ferromagnetique nimnsb est le prototype de la classe des demi-metaux dont la caracteristique est que les electrons de conduction sont polarises en spin a 100% au niveau de fermi. Cette propriete fait de ces composes des materiaux ideaux pour la realisation de composants electroniques utilisant le spin de l'electron. Le but de cette these etait d'etudier les proprietes magnetiques et de transport de nimnsb et d'elaborer des systemes magnetoresistifs en couches minces a base de ce compose. L'etude des proprietes magnetiques et de transport de nimnsb a l'etat massif, notamment

Style APA, Harvard, Vancouver, ISO itp.

10

Lin, Yeu-Pyng, and 林宇平. "Studies on drying characteristics and thin-layer drying models of freeze-drying with far-infrared radiation." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/75964343800560943213.

Pełny tekst źródła

Streszczenie:

博士<br>國立中興大學<br>食品暨應用生物科技學系<br>94<br>An experimental dryer was developed to determine the drying characteristics of sweet potato (Ipomoea batatas) cubes samples during freeze-drying with far-infrared (FIR) radiation. The drying time of sweet potato cubes dehydrated by three drying methods, i.e., air-drying, freeze-drying, and freeze-drying with FIR were compared, and freeze-drying with FIR was found to be able to reduce the drying time. Both constant and falling rate drying periods were observed, and empirical equations were developed to study the behavior of drying rate in the falling rate pe

Style APA, Harvard, Vancouver, ISO itp.

11

Shei, Hung Jung, and 謝宏榮. "Thin-Layer Models and Simulation of Intermittent Drying of Rough Rice." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/68228726223985401275.

Pełny tekst źródła

Streszczenie:

博士<br>國立臺灣大學<br>農業機械工程學系研究所<br>88<br>The predictive accuracy of rough rice drying highly depends on the selection of the simulation model. During the past few decades, many researchers proposed lots of mathematical drying models for thin-layer drying. However, most of them are not consistent with the actual drying behavior at the beginning period of drying. In the present study, heated air of nine different temperature/humidity combinations are used to dry rice samples of six different moisture contents for the first 10-minute drying. A criteria of Newton cooling law with regression technique

Style APA, Harvard, Vancouver, ISO itp.

12

Wang, Han, and 王. 涵. "Screening lipolytic active bacteria by thin layer model plate diffusion." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/3758mj.

Pełny tekst źródła

Streszczenie:

碩士<br>明志科技大學<br>生化工程研究所<br>100<br>This studies try to establish recognition a simple and easy process for identify lipid utilizing bacteria isolate in a TLC plate,which envolve a diffusion assay. The point is to help & improve traditional instrument analysis. when dealing slummy substrate like long chain fatty acid. It is also limited by the oxidation . Based on the pore size are easy to be penetrated and purchased product. We found it is possible to reveal a particular diffusion pattern for identify hydrolytic product so long it is below medium oxidation state The ion exchange adsorbent (i.e.

Style APA, Harvard, Vancouver, ISO itp.

13

Liang, Yu-Chih, and 梁育誌. "The Thermal Conductivity Model Analysis of Thin-Film Material for Organic Emitting Layer." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/zy5t55.

Pełny tekst źródła

Streszczenie:

碩士<br>國立臺北科技大學<br>光電工程系研究所<br>98<br>The purpose of thesis research is to estimate the thermal conductivity of organic light-emitting thin-film material in Organic Light Emitting Diode (OLED) by means of solving two-dimensional heat transfer equation with simplified two-layer structure. The thermal conductivity of the organic light-emitting layer was obtained from fitting our parametric model to the experiment data acquired by our surface temperature measurement system. The parametric model developed in this study was first applied to single-layer Si and SiO2 for verifying its accuracy. T

Style APA, Harvard, Vancouver, ISO itp.

14

Dabrowski, Paul Peter. "Boundary-layer flows in non-Newtonian fluids." 2009. http://hdl.handle.net/2440/60067.

Pełny tekst źródła

Streszczenie:

We examine the boundary-layer flow of generalised Newtonian fluids. A specific member of this class of non-Newtonian fluids, namely the Ostwald-de Waele or power-law fluid, is studied in some detail. We show, through the numerical solution of the governing equations, that this empirical model of fluids encountered in physical and industrial situations is of limited benefit when considering the boundary-layer flow of such a fluid. We then develop and employ a Carreau viscosity model in the same context and show that the numerical marching scheme has better convergence behaviour than was the cas

Style APA, Harvard, Vancouver, ISO itp.

15

(8158146), Diana M. Ramirez Gutierrez. "PERFORMANCE OF NOVEL PORTABLE SOLAR DRYING TECHNOLOGIES FOR SMALL AND MID-SIZE GROWERS OF SPECIALTY CROPS UNDER INDIANA WEATHER CONDITIONS." Thesis, 2019.

Znajdź pełny tekst źródła

Streszczenie:

<div>The overall goal of this thesis was to study the performance of two related portable multipurpose solar dryers, DehytrayTM and DehymeleonTM, in comparison to open-air sun drying by drying tomatoes, apples and mint under West Lafayette, Indiana weather conditions. Thin layer drying tests were conducted on tomato slices, apples slices and mint leaves, with three temperatures [24°C (75°F), 35°C (95°F) and 54 °C (130°F)], and an airflow velocity of 1 m/s to determine the drying kinetics of these products during diurnal drying cycles typical for solar and/or open-air sun drying. Subsequently,

Style APA, Harvard, Vancouver, ISO itp.

16

Barroso, Viviane Setti. "A consistent linear two-dimensional mathematical model for thin two-layer plates with partial shear interaction." Master's thesis, 2020. http://hdl.handle.net/10316/92236.

Pełny tekst źródła

Streszczenie:

Dissertação de Mestrado Integrado em Engenharia Civil apresentada à Faculdade de Ciências e Tecnologia<br>This dissertation presents a consistent derivation, from three-dimensional linear elasticity, of a two-dimensional mathematical model describing the bending and in-plane stretching behaviours, under a general system of quasi-static distributed loads, of thin two-layer plates with partial shear interaction. The following key assumptions are made:(i) Each layer, when considered separately, behaves as a Kirchhoff plate.(ii) The interlayer (with non-zero thickness), when considered separately,

Style APA, Harvard, Vancouver, ISO itp.

17

Lor, Whey-Bin, and 羅惠濱. "Analysis of Microscale Heat Transfer in Multi-Layer Thin Films with Interface Thermal Resistance by Thermal Wave Model." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/78315253749930939470.

Pełny tekst źródła

Streszczenie:

博士<br>國立交通大學<br>機械工程系<br>88<br>Heat transfer in the multi-layer thin films composite medium is a rapidly emerging area, which becomes more and more attractive in practical engineering problems. Examples include short-pulse or ultra-short pulse laser heating widely used in the electronic layers package, thermal stability of superconductors, annealing of semiconductors, measurement of thin-film properties, and surface heating and melting of metals. The heat conduction in these situations dealing with the microscale in length and time, extremely short time responses, extremely high rate change

Style APA, Harvard, Vancouver, ISO itp.

18

Weisemöller, Thomas. "X-ray analysis of praseodymia." Doctoral thesis, 2009. https://repositorium.ub.uni-osnabrueck.de/handle/urn:nbn:de:gbv:700-2009111311.

Pełny tekst źródła

Streszczenie:

In this thesis, it was shown that thin films of hexagonal praseodymium sesquioxide on Si(111) can be transformed to B-oriented twin free films of cubic praseodymium dioxide with oxygen vacancies by post deposition annealing in 1 atm. oxygen at temperatures from 300°C up to 700°C for 30 minutes. Films annealed at 100°C and 200°C are still purely hexagonal praseodymium sesquioxide after the annealing process. In the transformed films, two stoichiometric phases coexist laterally. The lateral lattice constant of both species is almost identical to the one of the originally deposited hexagonal pras

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!