Spis treści
Gotowa bibliografia na temat „Ti (Computer program)”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Ti (Computer program)”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Ti (Computer program)"
1
Hollebrands, Karen Flanagan, and Hollylynne Stohl. "Technology Tips: February 2004." Mathematics Teacher 97, no. 2 (2004): 152–55. http://dx.doi.org/10.5951/mt.97.2.0152.
Pełny tekst źródłaStreszczenie:
This month's “Technology Tips” introduces readers to a powerful teacher-productivity tool. Mathematics teachers have needed inexpensive, easy-to-use software that allows them to create electronic documents that contain multiple representations. One such software package is TI-Interactive! (version 1.1, Texas Instruments, 2002). TI-Interactive is a word-processing tool that combines the features of a graphing calculator with the flexibility of a word-processing program, an equation editor, and a computer algebra system. This software tool gives mathematics teachers the power to create, modify, and share textbook-quality graphics and symbols. This “Technology Tip,” written by Robin L. Rider, is meant to introduce some of the commonly used features of the software. Future “Technology Tips” will explore more advanced features.
2
Haddad, Menashe, Rafael Reiss, Pearl Lilos, and Camil Fuchs. "TI-59 programmable calculator program for calculating predicted operative mortality in general surgery." Computers in Biology and Medicine 16, no. 6 (1986): 445–52. http://dx.doi.org/10.1016/0010-4825(86)90068-5.
Pełny tekst źródła
3
Tukiran, S., P. Surian, and PH Endiah. "The effect of adding impurities to the high density fuel matrix on the reactivity of the RSG-GAS core." Journal of Physics: Conference Series 2193, no. 1 (2022): 012003. http://dx.doi.org/10.1088/1742-6596/2193/1/012003.
Pełny tekst źródłaStreszczenie:
Abstract The safety calculation of the RSG-GAS reactor core needs to be done if new high-density fuel is used in the RSG-GAS core. The use of new high-density fuels is very much needed in the RSG-GAS core so that it is necessary to calculate its safety. When using high density fuel there will be a “bottle neck” effect where there is a problem with the fuel and cladding interaction. According to previous researchers this can be overcome by adding metal elements Si, Ni or Ti to fuel. However, with the addition of metal elements Si, Ni or Ti to the fuel, it needs to be analyzed in the RSG-GAS core. The analysis was carried out calculations using a computer program by simulating the Si metal used 1%, 2%, 3% 4% and 5% in the fuel. The calculation of the additional metal element in the high-density fuel effect on the reactivity of the RSG-GAS core was carried out with the WIMSD-5B and Batan-FUEL programs. The WIMSD-5B program is a computer program consisting of several modules including the transport module which is used for the calculation of the generation of macroscopic constants for the 19.75% enriched uranium silicide fuel and the density of 4.8 gU/cc as a function of degree of burn. Core calculations were performed using a neutron diffusion program, namely Batan-FUEL. By calculating the core criticality at operating temperature, the core neutronic parameter values are obtained. The results of the analysis show that the amount of Si 5% in the high density fuel matrix can solve the bottle neck problem and the neutronic parameters are still within the safety limit. This value will determine how much the value of the fuel burn up and control rods are in accordance with the acceptance criteria so that the safety analysis can be carried out on the RSG-GAS core using high density. From the analysis, it was found that the addition of the element Si in the high-density fuel matrix did not find any significant changes in core reactivity and neutronic parameter.
4
С. Баяннасан. "Дулаалгын тунгалаг системүүд". Физик сэтгүүл 13, № 251 (2022): 97–103. http://dx.doi.org/10.22353/physics.v13i251.246.
Pełny tekst źródłaStreszczenie:
Abstract: In a southerly oriented facade, a Transparent Thermal Insulation (TI) converts incoming solar radiation into usable heat which can be transported to the interior of the building. Transparent insulations are generally installed in front of massive building walls wich serve as energy storage. Different variations of installations have been simulated with a computer program. Real weather data from the Test Reference Year for Ulaanbaatar, Mongolia have been taken into account, a heat gain of as high as 175,8 kWh/m2 seems attainable in wintertime.
5
Ogoltcov, Alexey, Dmitry Sokolov, Semen Sokolov, and Alexander Vasilyev. "Computer Model STAN 2000 and its Use in Practice of Steels Hot Rolling on Mill 2000 of Severstal." Materials Science Forum 854 (May 2016): 183–89. http://dx.doi.org/10.4028/www.scientific.net/msf.854.183.
Pełny tekst źródłaStreszczenie:
An integral computer model/program STAN 2000 for simulation of steels hot rolling on mill 2000 of SEVERSTAL was developed. The capacity of the model includes, for example, the following features:‒ control of power parameters and prediction of hot strip temperature for a given rolling and accelerated cooling regimes;‒ follow-up of the evolution of steel microstructure at all stages of strip production and prediction of ultimate mechanical properties (yield stress, ultimate tensile stress and relative elongation);‒ optimization of rolling regimes for existing steel grades and developing them for a new ones.The STAN 2000 program is written in С++ programming language and can work on all modern Microsoft Windows family operating systems. The program has a well-designed and user-friendly interface facilitating its practical use.The integral model was calibrated using an extensive data base on rolling regimes and forces, measured temperatures and final mechanical properties for a number of steel grades rolled on mill 2000 of SEVERSTAL with chemical compositions covering the following ranges of alloying elements content (mass.%): С(≤0.65); Mn(≤2.0); Si(≤1.0); Cr(≤0.9); Ni(≤0.6); Cu(≤0.5); Mo(≤0.4); Nb(≤0.05); V(≤0.065); Ti(≤0.06); B(≤0.003).Some results of calculations performed with STAN 2000 program for temperatures, rolling forces and mechanical properties are presented and compared with experimental data. Some examples of the program utilization in hot strip production on mill 2000 of SEVERSTAL are presented and discussed.
6
Klimushyn, P. S., T. P. Kolisnyk, O. F. Lanovoi, and M. O. Mozhaiev. "Research Of Modeling Environments For Microprocessor Systems With Additional Modules Of Cryptographic Information Protection." Bionics of Intelligence 1, no. 94 (2020): 36–42. http://dx.doi.org/10.30837/bi.2020.1(94).06.
Pełny tekst źródłaStreszczenie:
The field of application of the protected microprocessor systems includes information security functions: authentication of subjects and objects of information interaction, information encryption, integrity control, access control,key management. Today, the urgent task is to establish the security of microprocessor-based systems using a variety ofcomputer simulation software environments. The work analyzes the most effective and affordable computer simulation programs for microprocessor systems and gives practical recommendations for their use. It has been shown thatthe most powerful computer-aided design system is the Proteus software suite which allows simulating the operationof various microprocessor devices with support for several microcontroller families from different manufacturers. Themain advantages include: performing all stages of development in a single environment; the ability to write, debug, andtest firmware, generate diagnostic messages to find programming errors. Using Multisim in the educational processmakes it possible to: review and change the status of the register content, program memory and data, stack cells andbit configuration; visualize the result of the execution of a single command or a program as a whole; demonstrate thepractice of joint use of languages C and Assembler in one project in order to optimize the program; to study the basics ofoperation and features of peripheral devices functioning. However, the limited set of microcontrollers in the Multisimprogram imposes significant restrictions on the possibility of using it for development of real projects. The computersimulation program TINA has a russified interface that is much easier compared to the Proteus with an ability to enter allthe information about the created project into one file. Compared to Multisim, the TINA library contains significantlymore microcontroller models, and the built-in programmer allows modifying programs and observing the results. Beingable to use the free version of TINA-TI and having an online version of TINACloud using cloud technologies makes thisprogram very useful for education. Web service offers many educational resources and the ability to perform research onthe design of microprocessor systems.
7
Balaes, A. M. E., K. Dixon, and G. J. Wall. "Application of X-Ray-Fluorescence Spectrometry to the Analysis of Ta-Nb-Sn Slags and Associated By-Products." Applied Spectroscopy 41, no. 3 (1987): 509–12. http://dx.doi.org/10.1366/0003702874448995.
Pełny tekst źródłaStreszczenie:
This paper describes the development of an accurate, precise, and rapid analytical procedure using x-ray-fluorescence spectrometry for the determination of Nb, Ta, Mg, Al, Si, P, K, Ca, Ti, Mn, Fe, Zr, and Sn in a wide variety of materials resulting from the processing of Ta-Nb-Sn slags to produce Ta-Nb oxides. The method involves evaporation of all the liquids to dryness, a 1:8 fusion of the solid materials with a flux consisting of Na-Li tetraborate and Na2CO3, and the addition of La oxide as a heavy absorber. With the use of a computer program, residual matrix effects are corrected for by influence-factor calculations.
8
Shabaev, Evgeniy A., and Mikhail M. Romanovets. "Computer Simulation of a Digital System of Automatic Lighting Control." Engineering Technologies and Systems 34, no. 2 (2024): 295–317. http://dx.doi.org/10.15507/2658-4123.034.202402.295-317.
Pełny tekst źródłaStreszczenie:
Introduction. In the poultry industry, the use of local LED lighting systems with changeable light and correlated color temperature of the luminaire optical radiation during the photoperiod is promising. To maintain light intensity accurately at a specified level, the use of an automatic control system (ACS) of lighting is required. Aim of the Study. The study at aimed at determining the parameters for the PI controller of the digital ACS of lighting in all-age cages, providing the required quality indicators of the regulatory process. Materials and Methods. For the study there were used the elements of mathematical statistics, experimental research design theory, correlation and regression analysis, automatic control theory and computer simulation. Real experiments were carried out on a laboratory sample of a digital dynamic local lighting system. Computer simulation was performed in the SimInTech program. Results. A computer model for a digital ACS of lighting has been developed. The tunings of the PI controller were calculated using the CHR, VTI, and Kopelovich methods. A comparative estimation of the control process quality was carried out using graphs of transient processes obtained by computer simulation. The reliability of the results of computer simulation of ACS lighting has been confirmed experimentally. Discussion and Conclusion. High regulator performance indicators for the digital ACS of lighting were ensured by a PI controller with kP = 14.027∙10−3 and TI = 145.72 ms calculated using the Kopelovitch method. A comparative assessment of transient processes in a real ACS and in a computer model of this system allows concluding that the developed model is highly accurate and the choice of simulation parameters in the SimInTech program is correct. It has been experimentally established that the required quality of the control process of ACS is ensured for a wide range of specified lighting: from 1 to 25 lux.
9
Ogoltcov, Alexey, Dmitry Sokolov, Semen Sokolov, and Alexander Vasilyev. "Practical Use of Computer Model STAN 2000 for Improvement and Creation of Regimes for Hot Rolling of Steels on SEVERSTAL Mill 2000." Materials Science Forum 879 (November 2016): 2543–48. http://dx.doi.org/10.4028/www.scientific.net/msf.879.2543.
Pełny tekst źródłaStreszczenie:
An integral computer model STAN 2000 designed for of-line simulation and control of hot rolling on mill 2000 of SEVERSTAL was developed. The capabilities of the model include the following features: ‒ calculations of power parameters for all stands of mill 2000 for a given rolling schedule; ‒ strip temperature calculations depending on selected rolling and accelerated cooling regimes; ‒ follow-up of steel microstructure evolution at all stages of strip production and prediction of ultimate mechanical properties (yield stress, ultimate tensile stress, relative elongation and toughness); ‒ optimization of rolling regimes for existing steel grades and developing them for a new one. The STAN 2000 program is written in С++ programming language and can work on all modern Microsoft Windows family operating systems. The program has a well-designed and user-friendly interface facilitating its practical use. The integral model was calibrated using an extensive data base on rolling regimes and forces, measured temperatures and final mechanical properties for a number of steel grades rolled on mill 2000 of SEVERSTAL with chemical compositions covering the following range of alloying elements content (mass.%): С(≤0.65); Mn(≤2.0); Si(≤1.0); Cr(≤0.9); Ni(≤0.6); Cu(≤0.5); Mo(≤0.4); Nb(≤0.05); V(≤0.065); Ti(≤0.06); B(≤0.003). The examples of STAN 2000 program use in practice of industrial hot strip production on mill 2000 of SEVERSTAL are presented and discussed.
10
A, Anjasmara. "Camera Stabilizer 2 Axis by Proporsional Integral Derivative (PID) Based LabView." Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan 3, no. 2 (2015): 25–27. http://dx.doi.org/10.34010/telekontran.v3i2.1879.
Pełny tekst źródłaStreszczenie:
Abstract - In taking a video on the camera results that are not much movement are needed, so that the video can be seen properly by the audience. In addition, the video does not have a lot of distortion which is caused by being unstable in its capture. Then a Camera Stabilizer is needed so that the resulting video remains stable. This camera stabilizer uses a computer device in making this program needed to make it easier for the operator to set the desired angle. In order to obtain the best stability, a tuning of the Proportional Integral Derivative (PID) controller parameter is performed. In this tuning we can find out the values of Proportional gain (Kp), Integral Time (Ti), and Derivative Time (Td). The PID controller can provide action to the servo motor controller based on the error obtained, the desired servo motor rotation value is called the setpoint. LabView software is used as a driver, motor speed control. Keyword : LabView, servo motor, arduino, accelerometer, computer
Książki na temat "Ti (Computer program)"
1
Chiarolanza, Claudia. L'analisi dei processi psico-sociali: Lavorare con ATLAS.ti. Carocci Faber, 2007.
Znajdź pełny tekst źródła
2
Abelson, Harold. Structure and interpretation of computer programs. MIT Press, 1985.
Znajdź pełny tekst źródła
3
Abelson, Harold. Structure and interpretation of computer programs. MIT Press, 1985.
Znajdź pełny tekst źródła
4
Lynne, Mass, ed. The Texas Instruments LOGO manual. Childrens Press, 1985.
Znajdź pełny tekst źródła
5
Abelson, Harold. Structure and interpretation of computer programs, second edition. MIT Press, 1996.
Znajdź pełny tekst źródła
6
Kemnitz, Thomas Milton. The Texas Instruments BASIC manual. Childrens Press, 1985.
Znajdź pełny tekst źródła
7
Abelson, Harold. Structure and Interpretation of Computer Programs. MIT Press Ltd, 1996.
Znajdź pełny tekst źródła
8
Abelson, Harold. Structure and interpretation of computer programs. MIT Press, 1985.
Znajdź pełny tekst źródła
9
Lottrup, Peter M. L. Compute!'s beginner's guide to assembly language on the TI-99/4A. Compute! Publications, 1985.
Znajdź pełny tekst źródła
10
Abelson, Harold. Ji suan ji cheng xu de gou zao he jie shi: Structure and interpretation of computer programs. 2nd ed. Ji xie gong ye chu ban she, 2004.
Znajdź pełny tekst źródłaStreszczenia konferencji na temat "Ti (Computer program)"
1
Salimijazi, H. R., F. Azarmi, T. W. Coyle, and J. Mostaghimi. "Relationship between the Elastic Modulus and Microstructure in Vacuum Plasma Sprayed Structures." In ITSC2005, edited by E. Lugscheider. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2005. http://dx.doi.org/10.31399/asm.cp.itsc2005p1208.
Pełny tekst źródłaStreszczenie:
Abstract The structure of thermally sprayed deposit consists of individual lamellae formed from melted and re-solidified particles, along with unmelted and partially melted particles, pores, microcracks, and splat boundaries. The elastic modulus of a vacuum plasma sprayed Ti-6Al-4V alloy parallel to the splat plane determined by standard uniaxial tensile testing was found to be approximately 30% lower than that of conventionally processed materials with the same level of porosity. The relationship between the elastic modulus and the microstructure was studied using an in-situ tensile testing stage in an optical microscope combined with analytical and finite element models. An idealized microstructure was used for the analytical model, which yielded an estimate of the modulus higher than that measured. The finite-element program OOF was also used to compute the elastic modulus based on micrographs of polished and etched surfaces and predicted a reduction of about 37% in the modulus.
2
Langa, Claudiu. "USING ICT IN THE EDUCATION PROCESS BY PRE-UNIVERSITY TEACHERS AND PRE-SERVICE TEACHERS - COMPARATIVE STUDY." In eLSE 2012. Editura Universitara, 2012. http://dx.doi.org/10.12753/2066-026x-12-031.
Pełny tekst źródłaStreszczenie:
Practice has often proven that in many cases the multimedia technological applications (internet, media editing hardware and software platforms) can rise the quality of the educational act by optimizing the information transfer, pupils’/students’ development of specific competences, development of creativity and involving in common activities with the help of the internet. Nevertheless, a series of studies reveal the fact that teachers consider the student-teacher relation could not be replaced, even partially, by technology. The present paper presents the results of a study run in the 14 gymnasiums and high schools from Arges county and University of Pitesti. The purpose of the study is to identify the perception of the social-humanistic discipline teachers in pre-university education and of the students at the social-humanistic faculties (psychology, history, journalism), wishing to become teachers, on the use of ICT resources in the didactical process. Analyzing the perception of the teachers and students in the group on the efficiency of multimedia means in facilitating the transmission of knowledge and the shaping of pupils’ competences, in the judicious management of the time allocated to class teaching, in the differentiated treatment of pupils, in intermediating the pupil-teacher relationship, is among the objectives of this study. The research hypotheses of this study are: there are differences as regards students’ and teachers’ perception on the utility of multimedia means in facilitating the application of teaching-learning methods which are attractive and interactive for pupils; the existence of differences as regards students’ and teachers’ perception on the judicious management of the time allocated to class teaching through the use of multimedia means, the existence of differences as regards students’ and teachers’ perception on the individualization of training through the application of multimedia methods, the existence of differences as regards students’ and teachers’ perception on the intermediation of the pupil-teacher relationship through social media means. The methodology used in this investigative approach is the questionnaire applied to the social-humanistic discipline teachers in pre-university education and those students who attend the courses of the psycho-pedagogical studies program with certification for a teaching career and who have evaluated the university didactic staff. The study was carried out on a group of 41 socio-humanistic teachers and 56 third-year students of the University of Piteşti, in the social and human sciences field. Only third-year students were included in the group because the Computer Assisted Instruction was a subject studied during that year. Also during the third year students undertake pedagogical training and have access to schools in order to attend to lessons and to teach a certain number of hours. Findings and Results of this study have aimed at the verification of research hypotheses. The results have been processed and interpreted through descriptive and inferential statistical analysis. Three of these hypotheses have been confirmed and one has not been confirmed following data processing and interpretation. The conclusions further to the research provide relevant data for improving the ICT use methodology in the process related to the teaching of social-humanistic disciplines.
3
Hallstedt, Sophie, Anthony W. Thompson, Ola Isaksson, Tobias C. Larsson, and Henrik Ny. "A Decision Support Approach for Modeling Sustainability Consequences in an Aerospace Value Chain." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12975.
Pełny tekst źródłaStreszczenie:
Next generation jet engine technologies are typically driven by performance, value and environmental challenges, and appropriate technologies are developed in international research programs. One on-going engine component technology project at an aerospace component manufacturer aims to develop an engine with less fuel consumption. A likely consequence is higher pressure in the core engine, which leads to higher temperature. One way to handle the higher temperature is using a more advanced Ti-alloy for the product component, which will render a different sustainability profile. One weakness in current decision situations is the inability to clarify and understand the “value” and “sustainability” implications compared to e.g. performance features of concepts. Both “value” and “sustainability” include a rich set of features important for successful introduction of new products and product-service solutions to the market. The purpose with this research is to provide decision support for companies in early development phases for assessment of value and sustainability consequences over product-service system lifecycles. A workshop was held with the aerospace component manufacturer and a value chain partner focusing on material handling, to: i) get a better understanding of activities, flows and ownership related to the studied materials at the two companies, ii) to understand the companies’ perspective at new suggested scenarios with regard to these materials, and iii) define relevant scenarios to look into more in depth from a sustainability and value perspective. Three different scenarios were developed with differences in ownership, responsibilities and value streams. It is therefore essential to be able to quickly assess and optimize consequences of such alternative scenarios. Based on the workshop experiences and scenarios, a modeling and simulation approach to assess sustainability and value consequences for the scenarios is proposed. The sustainability consequences are based on a sustainability life cycle assessment and a risk assessment. Key features of the proposed tool include: consideration of the time dimension, societal sustainability consequences, risk assessment, company value assessment, and cost/revenue perspectives.