Gotowe bibliografie tematyczne / Transmission lo

Gotowa bibliografia na temat „Transmission lo”

Autor: Grafiati
Data publikacji: 1 kwietnia 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Transmission lo”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Artykuły w czasopismach na temat "Transmission lo":

1

Santi, M. N., J. Y. Reymond, M. C. Capel, P. Di-maio, P. Chardon, B. Grac, M. Daled i M. Pietri. "Transmissions ciblees. transmission de quaute". Réanimation Urgences 7, nr 2 (marzec 1998): 151. http://dx.doi.org/10.1016/s1164-6756(98)80283-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kim, Hyoung Eui, Doh Sik Kim, Yoon Pyo Lee i Yung Chul Yoo. "Accelerated Life Testing Method of Transmission". Key Engineering Materials 326-328 (grudzień 2006): 1865–68. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.1865.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
In this study, we proposed a process of an accelerated life testing method of 5-speed manual transmissions used in vehicles, which loads are consisted of multiple alternating loads. The entire process of an 5-speed manual transmission’s accelerated life testing method where no failures are allowed, is a process that requires an abundance of assumptions, and other factors that are estimates such as the shape parameter, beta() and the fatigue damage exponent (x). And the process is consisted of 7-step process. From the 1-setp, which is the deriving the service(use) torque and speed(rpm) profile of the transmission, to the 7-step, we could determine the accelerated life time, the accelerated torque and the accelerated speed(rpm), which are the equivalent cumulative fatigue damage. Also, we have performed accelerated life test on 5-speed manual transmission by using the following 7-step process.
3

Sun, Zongxuan, i Hussein Dourra. "Model-Based Transmission Control". Mechanical Engineering 137, nr 12 (1.12.2015): S15—S18. http://dx.doi.org/10.1115/1.2015-dec-9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Abstract This article presents an overview of model-based transmission control. The transmission is an integral part of the automotive powertrain and connects the engine to the vehicle via the driveline. Just as for the internal combustion engine, traditional transmission control has been conducted with extensive calibrations. This is mainly due to the lack of precise models and low cost sensors that can enable real-time model-based feedback control. However the calibration-based approach is facing more challenges as the recent trend in transmission systems has driven up the time and cost associated with the calibration process. Recently, eight and nine speed transmissions have been introduced. The increasing number of different types of transmissions and the gear ratios can drastically increase the burden for control calibration. This calls for control-oriented model development and model-based control. Transmission control is mainly concerned with the transmission shift scheduling and gear ratio shift control. This shift scheduling determines when to shift and which gear to shift.
4

Esser, Constantin, i Jörg Schmitz. "Reduced friction bonded transmission pistons in automatic transmissions". ATZ worldwide 109, nr 4 (kwiecień 2007): 11–12. http://dx.doi.org/10.1007/bf03224924.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Wiwanitkit, Viroj. "Unusual mode of transmission of dengue". Journal of Infection in Developing Countries 4, nr 01 (30.11.2009): 051–54. http://dx.doi.org/10.3855/jidc.145.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Dengue is the most important tropical mosquito-borne infectious disease caused by an arbovirus, the dengue virus. It should be noted that there are still other unusual modes of transmission of dengue infection. This paper summarizes those non vector-borne transmissions of dengue including vertical transmission, transfusion related transmission, transplantation related transmission, and needle-stick-related transmission.
6

Sauret, Marie-Jean, i Marina Portuese. "Transmission impossible, transmission d’un impossible". Empan 101, nr 1 (2016): 102. http://dx.doi.org/10.3917/empa.101.0102.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Tolley, D. "Charging transmission [power transmission pricing]". Power Engineer 17, nr 2 (2003): 22. http://dx.doi.org/10.1049/pe:20030204.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Gribik, P. R., D. Shirmohammadi, J. S. Graves i J. G. Kritikson. "Transmission Rights and Transmission Expansions". IEEE Transactions on Power Systems 20, nr 4 (listopad 2005): 1728–37. http://dx.doi.org/10.1109/tpwrs.2005.851919.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Dieckhaus, Kevin D., Toan H. Ha, Stephen L. Schensul i Avina Sarna. "Modeling HIV Transmission from Sexually Active Alcohol-Consuming Men in ART Programs to Seronegative Wives". Journal of the International Association of Providers of AIDS Care (JIAPAC) 19 (1.01.2020): 232595822095228. http://dx.doi.org/10.1177/2325958220952287.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Background: The rollout of antiviral therapy in Low and Middle Income Countries (LMICs) has reduced HIV transmission rates at the potential risk of resistant HIV transmission. We sought to predict the risk of wild type and antiviral resistance transmissions in these settings. Methods: A predictive model utilizing viral load, ART adherence, genital ulcer disease, condom use, and sexual event histories was developed to predict risks of HIV transmission to wives of 233 HIV+ men in 4 antiretroviral treatment centers in Maharashtra, India. Results: ARV Therapy predicted a 5.71-fold reduction in transmissions compared to a model of using condoms alone, with 79.9%, of remaining transmissions resulting in primary ART-resistance. Conclusions: ART programs reduce transmission of HIV to susceptible partners at a substantial increased risk for transmission of resistant virus. Enhanced vigilance in monitoring adherence, use of barrier protections, and viral load may reduce risks of resistant HIV transmissions in LMIC settings.
10

Ryu, Jae-Hoon. "Metaphor and Transmission: Transmission of Concept and Transmission of Idea". Korean Society for the Study of Moral Education 34, nr 1 (30.03.2022): 229–52. http://dx.doi.org/10.17715/jme.2022.3.34.1.229.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Transmission lo” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki

Rozprawy doktorskie na temat "Transmission lo":

1

Jayachandran, Krishna K. "STBC-encoded cooperative asynchronous transmissions for transmission energy efficiency". Diss., Online access via UMI:, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Amai, Nikabou. "Contribution à la modélisation paramétrique en transmission mécanique : le modèle ARMAX entre l'erreur de transmission et le bruit d'engrènement". Lyon, INSA, 1998. http://www.theses.fr/1998ISAL0118.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
La conception des transmissions par engrenages s'oriente maintenant vers une réduction des nuisances sonores et vibratoires, après avoir optimisé les géométries. Depuis quelques années, l'erreur de transmission est considérée comme la principale excitation mesurable des systèmes engrenants. Dans le cadre de ce travail, nous avons cherché à établir un modèle expérimental du transfert entre l'erreur de transmission et le bruit d'engrènement d'un étage de réduction, prenant en compte les conditions de fonctionnement. Parmi les structures de modèles paramétriques disponibles, seul le modèle ARMAX permet d'avoir une bonne représentation de la fonction de transfert avec un faible nombre de paramètres. Ce modèle nécessite néanmoins une mise en forme des signaux et une étude par bandes de fréquence. L'étude présentée porte essentiellement sur la fréquence d'engrènement. L'interprétation physique du modèle passe par l'établissement de l'équation différentielle gouvernant le système modélisé. Cette première approche a montré que l'excitation du système est caractérisée par une combinaison linéaire de l'erreur de transmission et de sa dérivée par rapport au temps. Une étude paramétrique par la méthode des plans d'expériences a montré que la charge appliquée sur la denture n'intervient pas et que les facteurs géométriques de conception sont couplés aux facteurs de fonctionnement. Ces facteurs modifient le système de génération du bruit d'engrènement. La prise en compte de ces modifications sur les coefficients de l'équation différentielle permet de proposer un modèle hybride complet du transfert entre l'erreur de transmission et le bruit d'engrènement. Cette démarche est transposable à des transmissions de puissance complètes de type "boîte de vitesses"
Design of gear power transmissions moves towards reduction of vibration and noise pollution after have improving geometry. Since several years, transmission error is recognised as the main measurable excitation of the gearing mechanisms. In this work, we have chosen to introduce an experimental model of transfer between transmission error and acoustic effects on a one-stage gearing system, taking into account real operating conditions. From the available structures of parametric model, only the ARMAX model seems to be a reliable description of transfer function with a low number of parameters. These models nevertheless require signal modifications and an analysis by frequency bands. The presented study is essentially concerned with mesh frequency. The physical interpretation of the models runs though establishment of the differential equation which governs the concerned system. This first approach shows that the excitation is described by a combination of transmission error and its first time derivative. A parametric study, with the help of experimental design, leads to the conclusion that load is not the most influent factor and that geometric factors are associated with operating factors. These factors change the mechanism of gear noise generation. Taking these modifications into account on differential equation coefficients permits to propose a complex hybrid model of the transfer between transmission error and gearing noise. This modelisation method can be used on entire gearing power transmissions like automotive gearbox
3

Ulsund, Ragnar. "Offshore Power Transmission : Submarine high voltage transmission alternatives". Thesis, Norwegian University of Science and Technology, Department of Electrical Power Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9937.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:

Offshore power transmission is becoming an increasingly important issue. To moderate climate change, world leaders have set environmental goals that will be very difficult to reach without renewable power production and the removal of production units with high emissions. Wind power and electrification have been the focus in this report. Plans for the expensive wind power are already moving offshore. This report has made an attempt at suggesting a guideline for well-suited transmission systems, for wind power projects located at a distance in order to make them more economically attractive. Another emphasis has been to find the most suitable transmission system for gas turbines at offshore installations. As expected, the use of alternating current is best suited at shorter distances. At longer distances this system is still feasible up to 350 km, but losses will be high and there will be limited power available. A conventional thyristor-based direct current system will therefore be an attractive option for high power ratings and long distances. On the other hand, direct current based on voltage-source converters is considered more expensive, but has an improved control of reactive power and is therefore preferable to the conventional direct current system. To determine which system has the best design, one has to consider each case individually.

4

Rodriguez, Claudia Patricia. "Transmission pricing". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0028/MQ50390.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Shang, Wenzhuo. "Essays on electricity transmission investment and financial transmission rights". [Ames, Iowa : Iowa State University], 2006.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Freschi, Carla Roberta [UNESP]. "Investigação experimental sobre a transmissão aerógena e naso-nasal de Salmonella enterica subespécie enterica sorotipo Derby em suínos". Universidade Estadual Paulista (UNESP), 2007. http://hdl.handle.net/11449/101255.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Made available in DSpace on 2014-06-11T19:31:11Z (GMT). No. of bitstreams: 0 Previous issue date: 2007-03-27Bitstream added on 2014-06-13T19:01:35Z : No. of bitstreams: 1 freschi_cr_dr_jabo.pdf: 603658 bytes, checksum: 15276f88dc187672ee833d1c19fa7f90 (MD5)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Os suínos e seus produtos são considerados importantes fontes de salmonelose humana. Desta forma, o controle das infecções nas granjas é considerado essencial para a prevenção de Salmonella na cadeia produtiva de suínos. No entanto, o maior entrave na profilaxia da infecção é, principalmente, a falta de conhecimentos sobre sua epidemiologia em sistemas de produção intensivos de criação de suínos, principalmente em relação às possíveis vias de transmissão desse agente. Este estudo testou a hipótese da transmissão nasonasal (E1) e aerógena (E2) de Salmonella Derby na espécie suína. Os experimentos foram realizados em isoladores construídos em aço inoxidável e vidro e totalmente controlados. No E1, os isoladores dos suínos inoculados e dos suínos sentinela estavam conectados por pequena fenda que permitia apenas o contato naso-nasal. Em E2 os isoladores estavam conectados por condutores de ar que permitiam o fluxo de ar unidirecional do isolador 1 (suínos controle) ao isolador 3 (suínos sentinela), passando pelo isolador 2 (suínos inoculados). A duração de ambos experimentos foi de 15 dias. Nesse período, amostras dos sacos de dejetos, dos suabes retais, das fezes do piso e do ar foram colhidas diariamente e avaliadas quanto a presença de Salmonella. A hipótese de transmissão naso-nasal e aerógena de S. Derby não foi corroborada pelo isolamento e detecção do agente nos animais sentinela.
Pork and pork products are recognized as one of the major sources for human salmonellosis. Howeveri the infection control in the farms is considered essential for the Salmonella prevention in the productive swine chain. However, the most impediment in the infection prophylaxis is, mainly, the lack of knowledge on its epidemiology in intensives production systems, mainly related to the transmission possible ways of this agent. This study has tested the hypothesis of nose-to-nose and airborne transmission of Salmonella Derby in the swine species. The trials were performed using stainlesssteel and glass isolation cabinets and totally controlled. In the trial 1, inoculated pigs and sentinel pigs isolation cabinets were connected by small crack that allowed only the nose-to-nose contact. In the trial 2 isolation cabinets were connected by air ducts that allowed an unidirectional airflow from cabinet 1 (control pigs) to cabinet 3 (sentinel pigs), passing through cabinet 2 (inoculated pigs). The duration of both trials were 15 days. At this period, slurry bags, rectal swabs, pooled faecal from the floor and air samples were collected daily and assessed by culture and PCR. The nose-to-nose and airborne transmission hypothesis of S. Derby was not corroborated by the agent isolation and detection in the sentinel pigs.
7

Kwon, Youngho. "Estimating the value of financial transmission rights for transmission expansion". Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.497600.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
The current situation of insufficient investment in transmission tends to weaken the advantages of a deregulated power industry. These shortages mainly arise because of the risk of not recovering the cost of investing in new lines Location Marginal prices (LMPs) and Financial Transmission Rights (FTRs) are key elements in reducing these investment risks. Market participants are able to hedge against price fluctuations caused by transmission congestion through the purchase or sale of FTRs. The value of FTRs, which is tied to the difference in prices between locations in the network, would indicate where transmission expansion should be implemented.
8

Dán, György. "Internet Video Transmission". Doctoral thesis, KTH, School of Electrical Engineering (EES), 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-623.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:

The Internet has rapidly evolved from being a scientific experiment to a commercial network connecting millions of hosts that carries traffic generated by a large amount of applications with diverse requirements. Its architecture was however designed to enable efficient point-to-point delivery of bulk data, and can not provide statistical guarantees on the timely delivery of delay sensitive data such as streaming and real-time multimedia. Thus, applications that require low loss probabilities in today's Internet have to use some end-to-end error recovery mechanism. For delay sensitive applications the introduced latency by the applied schemes has to be low as well. Traffic control functions such as delay limited shaping and forward error correction (FEC), and multiple description coding (MDC) have been proposed for variable bitrate video. Their major drawback is, however, that it is difficult to predict their efficiency, as it depends on many factors like the characteristics of the stream itself, the characteristics of the traffic in the network and the network parameters. Consequently, it is difficult to decide which control mechanisms to employ, how to combine them and to choose the right parameters (e.g. block length, code rate) for optimal performance.

In this thesis we present results on the efficiency of traffic control functions and MDC for video transmission based on mathematical models and simulations. We investigate the efficiency of delay limited traffic shaping and the trade-offs in the joint use of traffic shaping and forward error correction. We identify the packet size distribution of the traffic in the network as an additional factor that may influence the efficiency of FEC, and present a thorough analysis of its possible effects. We present an analytical comparison of MDC versus media-dependent FEC and media-independent FEC, and based on the results we conclude that MDC is a promising error control solution for multimedia communications with very strict delay bounds in an environment with bursty losses. We combine the analytical results with traces from measurements performed on the Internet to evaluate how efficient these error control schemes are under real loss patterns. We compare the efficiency of MDC and media-dependent FEC in the presence of channel estimation errors; we propose a new rate allocation method, which is robust to mis-estimations of the channel state and which improves error resilience on non-stationary channels. Finally we present an analytical model of the performance of an end-point-based multimedia streaming architecture based on multiple distribution trees and forward error correction, and analyze the behavior of the architecture for a large number of nodes.

9

Dan, György. "Internet Video Transmission". Doctoral thesis, KTH, Telekommunikationssystem, TSLab, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-623.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
The Internet has rapidly evolved from being a scientific experiment to a commercial network connecting millions of hosts that carries traffic generated by a large amount of applications with diverse requirements. Its architecture was however designed to enable efficient point-to-point delivery of bulk data, and can not provide statistical guarantees on the timely delivery of delay sensitive data such as streaming and real-time multimedia. Thus, applications that require low loss probabilities in today's Internet have to use some end-to-end error recovery mechanism. For delay sensitive applications the introduced latency by the applied schemes has to be low as well. Traffic control functions such as delay limited shaping and forward error correction (FEC), and multiple description coding (MDC) have been proposed for variable bitrate video. Their major drawback is, however, that it is difficult to predict their efficiency, as it depends on many factors like the characteristics of the stream itself, the characteristics of the traffic in the network and the network parameters. Consequently, it is difficult to decide which control mechanisms to employ, how to combine them and to choose the right parameters (e.g. block length, code rate) for optimal performance. In this thesis we present results on the efficiency of traffic control functions and MDC for video transmission based on mathematical models and simulations. We investigate the efficiency of delay limited traffic shaping and the trade-offs in the joint use of traffic shaping and forward error correction. We identify the packet size distribution of the traffic in the network as an additional factor that may influence the efficiency of FEC, and present a thorough analysis of its possible effects. We present an analytical comparison of MDC versus media-dependent FEC and media-independent FEC, and based on the results we conclude that MDC is a promising error control solution for multimedia communications with very strict delay bounds in an environment with bursty losses. We combine the analytical results with traces from measurements performed on the Internet to evaluate how efficient these error control schemes are under real loss patterns. We compare the efficiency of MDC and media-dependent FEC in the presence of channel estimation errors; we propose a new rate allocation method, which is robust to mis-estimations of the channel state and which improves error resilience on non-stationary channels. Finally we present an analytical model of the performance of an end-point-based multimedia streaming architecture based on multiple distribution trees and forward error correction, and analyze the behavior of the architecture for a large number of nodes.
QC 20101115
10

Wang, Limin. "Progressive image transmission". Thesis, University of Ottawa (Canada), 1988. http://hdl.handle.net/10393/5394.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Transmission lo":

1

Srivastava, Atima. Transmission. New Delhi, India: Penguin Books, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kunzru, Hari. Transmission. London [etc.]: Penguin Books, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Srivastava, Atima. Transmission. London: Serpent's Tail, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Kunzru, Hari. Transmission. London: Hamish Hamilton, 2004.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kunzru, Hari. Transmission. New York: Penguin, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Association, American Gas, red. Transmission. Arlington, Va: American Gas Association, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Meaney, John. Transmission. London: Gollancz, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

O'Nan, Stewart. Transmission. Colo. Spgs. [i.e. Colorado Springs], CO: Arjuna Library, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kunzru, Hari. Transmission. New York: Dutton, 2004.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Sally, Leabhart, i Leabhart Thomas, red. Transmission. Claremont, Calif: Pomona College Theatre Department, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Transmission lo":

1

Cheng, Xiang, Luoyang Fang, Liuqing Yang i Shuguang Cui. "Transmission". W Wireless Networks, 27–33. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96116-3_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gooch, Jan W. "Transmission". W Encyclopedic Dictionary of Polymers, 759. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12031.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Weik, Martin H. "transmission". W Computer Science and Communications Dictionary, 1819. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_19971.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Iwadate, Yuichi, Yozo Utsumi, Yoshimichi Ohtsuka, Kenji Oumaru, Keiichi Kubota, Toshiyuki Takegahara, Taiji Nishigawa, Akio Yanagimachi i Takehiko Yoshino. "Transmission". W High Definition Television, 71–138. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4684-6536-5_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jufer, Marcel. "Transmission". W Electric Drives, 15–40. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118622735.ch3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Roberts-Zauderer, Dianna Lynn. "Transmission". W Metaphor and Imagination in Medieval Jewish Thought, 103–53. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-29422-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Hilgers, Michael. "Transmission". W Transmissions and Drivetrain Design, 11–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-662-65860-4_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Livesey, Andrew. "Transmission". W Practical Motorsport Engineering, 97–148. First edition. | Abingdon, Oxon : Routledge/Taylor & Francis, 2019.: Routledge, 2018. http://dx.doi.org/10.1201/9781351239189-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Frosh, Stephen. "Transmission". W Hauntings: Psychoanalysis and Ghostly Transmissions, 117–40. London: Palgrave Macmillan UK, 2013. http://dx.doi.org/10.1057/9781137031259_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Bonnick, Allan. "Transmission". W Automotive Powertrain Science and Technology, 66–86. Abingdon, Oxon ; New York, NY : Routledge, 2020.: Routledge, 2020. http://dx.doi.org/10.1201/9780429318023-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Transmission lo":

1

Bara, Mircea. "Designing Aspects of Cylindrical Transmission". W ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13087.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
The cylindrical transmission with balls is a new type of mechanical transmission, that allows movement transmission between two coaxial shafts [1]. In the first part of this paper presents the geometric and kinematics study of the elements of cylindrical -sinusoidal transmissions with balls, determining in this way the transmission ratios. In the second part of this paper presents the geometric and kinematics study of the elements of differential cylindrical transmission with balls, determining in this way the transmission ratios. An advantage of this transmission, as compared to other mechanical transmissions, is given by the possibility to obtain more transmission ratios. In case all cylinders of simple cylindrical transmission are moving elements a differential transmission it obtained. Another advantage is given by the possibility of obtaining complex transmissions by series and/or parallel arrangement of cylindrical transmission simple units.
2

Srinath, Nitin, Ashwin Kumar i Sharnappa Joladarashi. "Smart Multimode Transmission for Automobiles". W ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-67019.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
There are two basic types of transmissions — manual and automatic. While manual transmissions have greater transmission efficiency and better overall driving experience, it is difficult and not as easy to handle as automatic transmissions. Automatic transmissions make life a lot easier for the driver but are less efficient and laggard. So, the aim of this project is to take the best of both worlds and combine it in one, i.e. a transmission system that is capable of working as both a manual and an automatic transmission. For this, we plan to automate a regular manual transmission with a manual override option on both the clutch and the gearbox systems. Motors will be used to control the clutch and the changing of gears in the gearbox. In the manual mode, the motors will be operated by user input switches (clutch pedal and stick shift). In the automatic mode, the same motors will be controlled by a control algorithm based on various inputs like weight of the car, inclination, speed of the engine and the car etc.
3

Bara, Mircea. "Designing Aspects of a Frontal-Sinusoidal Transmission With Balls". W ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59309.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
The frontal-sinusoidal transmission with balls is a new type of mechanical transmission, that allows movement transmission between two coaxial shafts. In the first part of this paper presents the geometric and kinematics study of the elements of a frontal -sinusoidal transmissions with balls, determining in this way the transmission ratios. In the second part of this paper presents the kinetostatic study of the elements of frontal transmission with balls, determining in this way the force that acts upon these forces which are necessary in the constructive dimensioning. An advantage of this transmission, as compared to other mechanical transmissions, is given by the possibility to obtain more transmission ratios. In case all disks of simple frontal-sinusoidal transmission are moving elements a differential transmission it obtained. Another advantage is given by the possibility of obtaining complex transmissions by series and/or parallel arrangement of frontal transmission simple units.
4

Fadow, Olivia, Skyler Leonard i Salim Azzouz. "Automation of a Dual Planetary Gearing Transmission Using Control Mechanisms and a Programmable Logic Controller". W ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-95173.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Abstract The transmission used in this project has been worked on by three senior design teams. The fourth team is currently working to design control mechanisms to automate the manual dual planetary transmission. The control mechanisms are a combination of mechanical and pneumatic systems that are controlled by a Programmable Logic Controller (PLC) program. The transmission will be used in the Machine Elements Design Laboratory to educate students on gear transmissions and levers. SolidWorks software was used to draw and simulate the mechanical parts of the control systems, before being sent to a machine shop for manufacturing. The first control system uses vertical levers and linear actuators to control the brakes, while the second uses horizontal levers and rodless pneumatic cylinders to control the clutches. Willis Gearing Theory was then used to determine the six gear ratios realized by the transmission. To automate the mechanical parts of the control systems, a program was designed and uploaded to the CPU console. A Human Machine Interface (HMI) displays the transmission’s speed and torque readings from the PLC. It is expected that the future group will the finish the automation of the transmission and proceed with the testing phase.
5

Grenier, Martin, i Cle´ment Gosselin. "Kinematic Optimization of a Robotic Joint With Continuously Variable Transmission Ratio". W ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48443.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
The range of possible tasks achievable by robots highly depends on the selection of motors and transmissions. For example, variable ratio transmissions surpass single ratio transmissions because they can modify the torque-speed parameters of the actuator and, therefore, maintain the optimal power output state from the motor. Consequently, the use of variable ratio transmissions may expand a robot’s achievable tasks. A robotic joint with continuously variable transmission ratio is presented in this paper. This new type of transmission joint may be used in serial or parallel robots. The transmission consists of a doubly actuated two-degree-of-freedom five-bar parallel mechanism. The main actuator is located at the input revolute joint. The variation of the ratio is achieved with the adjustment actuator located at a second revolute joint. Such a transmission, based on a linkage, may have unde-sired ratio variations for a constant adjustement joint position. Therefore, two different optimization methods are presented to determine the best geometric parameters in order to minimize the undesired ratio variation while maximizing the possible transmission ratio range. The performance indices are either optimal for the entire range or only for the maximum and minimum ratios available. A simulation is presented with the best parameters obtained with the optimization based on the maximum and minimum ratios. Results show a transmission ratio ranging from 0.9:1 to 4.5:1 with a minimal amplification of 3.9:1. The transmission ratio may vary continuously within the working boundaries. The output range of motion may be adapted to a serial robot joint.
6

Hedman, Anders. "Transmission Analysis: Automatic Derivation of Relationships". W ASME 1992 Design Technical Conferences. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/detc1992-0032.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Abstract A method for derivation of relationships for general mechanical transmission systems is given. The method is adapted for computer aided analysis and synthesis of the kinematics, loads and power flows. Losses are included. All relationships are handled by a computer program. No manual formulation and elimination of equations are necessary. The user only needs to describe the transmission system: 1. The transmission units, e.g. gear transmissions, planetary gear trains, clutches, input and output shafts. 2. How the shafts of those units are connected. Then, the computer program formulates and arranges the relationships. After that, a commercial program, “Maple”, performs the algebraic eliminations. Relationships between the speeds and/or torques of two arbitrary shafts can be derived, e.g. an algebraic relationship for the overall efficiency. Different power flows are possible in split-power transmissions. Special algorithms handle that. The method is a useful tool. It saves time and eliminates the risk for human errors.
7

Gudal, Sameer, Yong Pan, Shuh-Yuan Liou, V. Sundararajan, Daniel Antonetti i Paul K. Wright. "Design System for Composite Transmission Error Prediction for Automatic Transmissions". W ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/detc2004-57721.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Noise in vehicular automatic transmissions is a complex phenomenon involving several interacting factors. One of the contributing factors to noise for a single pair of meshing gears has been shown to be the transmission error. The transmission error (TE) is defined in terms of deviation of the speed ratio from the ideal speed ratio. It has since been hypothesized that the composite transmission error in a planetary system would be the key contributor to noise in automatic transmissions. This composite error would have to include the contributions from individual meshes and account for the configuration of the transmission system. This paper describes a design system that enables engineers to predict and study effects of parameter variation on the composite transmission error. The designer first specifies the configuration of the transmission using canonical graphs. The graph contains the elements such as gears, clutches and brakes of the transmission system as its nodes and the relationship among them for the edges. The design system uses the graph to solve for the speeds and torques. The transmission errors for the individual meshes are computed and then combined into the composite transmission error using a simple average.
8

Zhou, X. X., P. D. Walker, N. Zhang, B. Zhu i F. Ding. "The Influence of Transmission Ratios Selection on Electric Vehicle Motor Performance". W ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-85906.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Increasingly electric vehicle design is looking forward the application of multiple ratio transmissions in place of traditional single ratio gearboxes. The choice of gear ratio has significant influence on vehicle performance, including range, acceleration, and gradeability. To study the impact of different transmissions on EV’s dynamic and economic performance, mathematical models of an EV is presented which is applicable to both single and multiple ratio transmissions. These transmission variants are then studied under different operating conditions to investigate how operating conditions in the motor work efficiency change with different transmissions. Here comparisons are made between 2-speed and single speed transmission. Then the reasons for the results are analysed.
9

Fussner, Doug, i Yesh P. Singh. "Dual Stage Input Coupled Split Power Transmission Efficiency Optimization". W ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/detc2002/dac-34057.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Split power continuously variable transmissions can offer clutchless transitions from reverse through park and into the forward driving mode. The advantages of these transmissions can include elimination of a launch device while maintaining the continuous variability and fuel economy benefits of conventional CVTs. This paper offers further improvements to the transmission by providing an efficiency optimization methodology. Models for the transmission are constructed. A genetic algorithm is developed for the optimization routine. The effects of the gear material strength, gear module, gear tooth width, and shaft offset on the efficiency are determined. The bearing diameters and gear parameters are calculated and reviewed. Power loss contributions are presented in conjunction with their effect on the overall transmission efficiency. Recommendation for further improvements to the methodology is made.
10

Miao, Hsu-Chiang, Zongxuan Sun, Jonathan Fair, Joshua Lehrmann i Samuel Harbin. "Modeling and Analysis of the Hydraulic System for Oil Budget in an Automotive Transmission". W ASME 2008 Dynamic Systems and Control Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/dscc2008-2165.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Streszczenie:
Many automotive transmissions, including automatic and hybrid transmissions, employ electro-hydraulics for gear shift, system cooling, and lubrication. Transmission oil budget refers to the process of dynamically distributing pressurized fluid from the pump into the sub-systems of the transmission. The oil budget will ultimately determine the transmission pump size and directly impact vehicle fuel economy. It will further affect the dynamic performance of the transmission. Due to large number of components, complex hydraulic circuits, and dynamic operating conditions, estimating transmission oil budget is extremely complex. To obtain a precise oil budget, we need to not only model each hydraulic component accurately, but also analyze the flow requirement in a dynamic fashion. This paper presents the modeling of the transmission hydraulic system and its application for oil budget analysis.

Raporty organizacyjne na temat "Transmission lo":

1

Baker-Jarvis, James. Transmission. Gaithersburg, MD: National Bureau of Standards, 1990. http://dx.doi.org/10.6028/nist.tn.1341.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Baker-Jarvis, James. Transmission. Gaithersburg, MD: National Bureau of Standards, 1992. http://dx.doi.org/10.6028/nist.tn.1355.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Baker-Jarvis, James. Transmission. Gaithersburg, MD: National Bureau of Standards, 1993. http://dx.doi.org/10.6028/nist.tn.1355r.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Skone, Timothy J. Electricity Transmission. Office of Scientific and Technical Information (OSTI), kwiecień 2013. http://dx.doi.org/10.2172/1509158.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Skone, Timothy J. Transmission flaring. Office of Scientific and Technical Information (OSTI), styczeń 2018. http://dx.doi.org/10.2172/1559855.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Skone, Timothy J. Transmission Fugitives. Office of Scientific and Technical Information (OSTI), styczeń 2018. http://dx.doi.org/10.2172/1559856.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Fink, S., J. Rogers i K. Porter. Transmission Cost Allocation Methodologies for Regional Transmission Organizations. Office of Scientific and Technical Information (OSTI), lipiec 2010. http://dx.doi.org/10.2172/984666.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Rand, D. PPP Reliable Transmission. RFC Editor, lipiec 1994. http://dx.doi.org/10.17487/rfc1663.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Skone, Timothy J. Transmission Pipeline Fugitives. Office of Scientific and Technical Information (OSTI), styczeń 2018. http://dx.doi.org/10.2172/1559823.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Skone, Timothy J. Transmission Pipeline Venting. Office of Scientific and Technical Information (OSTI), styczeń 2018. http://dx.doi.org/10.2172/1559824.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Do bibliografii