Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Tungsten.

Rozprawy doktorskie na temat „Tungsten”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Tungsten”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Erdogan, Metehan. "Recovery Of Tungsten From Tungsten Bearing Compounds." Phd thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615540/index.pdf.

Pełny tekst źródła
Streszczenie:
Extensive research in recent years has failed to develop any essentially new method of large scale tungsten production. A new tungsten powder production technique from calcium tungstate (CaWO4) has recently been reported. In this thesis, this technique was further explored from the aspects of electrochemical reduction mechanism and kinetics, applicability to scheelite concentrates and industrial production. Cyclic voltammetry, constant potential and constant current electrochemical reduction tests were performed to determine the reversible cell potential. Analyses of the experimental results
Style APA, Harvard, Vancouver, ISO itp.
2

Zacharias, Marisa Aparecida [UNESP]. "Síntese, caracterização e estudos de precursores e de óxidos de molibdênio e de tungstênio." Universidade Estadual Paulista (UNESP), 2000. http://hdl.handle.net/11449/105673.

Pełny tekst źródła
Streszczenie:
Made available in DSpace on 2014-06-11T19:35:05Z (GMT). No. of bitstreams: 0 Previous issue date: 2000-02-21Bitstream added on 2014-06-13T19:44:56Z : No. of bitstreams: 1 zacharias_ma_dr_araiq.pdf: 3695623 bytes, checksum: f2762446db235d48a685f25509e7eeb2 (MD5)<br>O presente trabalho tem como objetivo a obtenção de óxidos de molibdênio e de tungstênio com propriedades texturais controladas, particularmente com elevadas áreas específicas. Tais óxidos serão posteriormente empregados como precursores nas sínteses de nitretos e carbetos de molibdênio e de tungstênio, materiais potencialmente pro
Style APA, Harvard, Vancouver, ISO itp.
3

Gianni, Lorenzo. "Electrodialytic recovery of tungsten and cobalt from tungsten carbide scrap." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022.

Znajdź pełny tekst źródła
Streszczenie:
Critical raw materials (CRMs) are essential for a wide range of European industrial ecosystems. Access to critical resources is necessary for Europe’s ambition to achieve climate neutrality and deliver the Green Deal. However, supply of material from primary sources is putting extreme pressure on the planet through greenhouse gas emissions, biodiversity loss and water stress. In this scenario, promoting circular economy by obtaining resources from secondary sources is therefore essential to reduce the environmental burden posed by raw material primary extraction and to secure the supply chain
Style APA, Harvard, Vancouver, ISO itp.
4

Ogundipe, Adebayo. "Environmental release of tungsten and other elements from tungsten heavy alloys addressing the environmental viability of tungsten heavy alloys." Saarbrücken VDM Verlag Dr. Müller, 2006. http://d-nb.info/989277992/04.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Pimenta, Juliana de Oliveira [UNESP]. "Influência do tratamento térmico assistido por pressão nas propriedades óptica e elétrica do trióxido de tungstênio." Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/138511.

Pełny tekst źródła
Streszczenie:
Made available in DSpace on 2016-05-17T16:51:42Z (GMT). No. of bitstreams: 0 Previous issue date: 2015-10-23. Added 1 bitstream(s) on 2016-05-17T16:55:29Z : No. of bitstreams: 1 000863481.pdf: 2321316 bytes, checksum: aa11a4318131811b9ac2636856e02252 (MD5)<br>The aim of this work is to study the influence of a pressure-assisted heat treatment on the electrical and optical properties of nanoparticulate tungsten trioxide (WO3) obtained by microwave assisted hydrothermal method. The behavior of WO3 as gas sensor and its pholominescence emission were used to evaluate the electrical and optical p
Style APA, Harvard, Vancouver, ISO itp.
6

Pimenta, Juliana de Oliveira. "Influência do tratamento térmico assistido por pressão nas propriedades óptica e elétrica do trióxido de tungstênio /." Araraquara, 2015. http://hdl.handle.net/11449/138511.

Pełny tekst źródła
Streszczenie:
Orientador: José Arana Varela<br>Co-orientador: Sergio Mazurek Tebcherani<br>Banca: Evaldo Toniolo Kubaski<br>Banca: Máximo Siu Li<br>Banca: Sônia Maria Zanetti<br>Banca: Anderson André Felix<br>Resumo:Este trabalho é referente ao estudo investigativo da influência de um tratamento térmico assistido por pressão nas respostas de propriedade elétrica, como sensor de gás e propriedade ótica de fotoluminescência de nanopartículas de trióxido de tungstênio (WO3), obtidas por processo hidrotermal assistido com micro-ondas adaptado. As condições de tratamento foram de 180 ºC sob pressão de 2 MPa dura
Style APA, Harvard, Vancouver, ISO itp.
7

Zacharias, Marisa Aparecida. "Síntese, caracterização e estudos de precursores e de óxidos de molibdênio e de tungstênio /." Araraquara : [s.n.], 2000. http://hdl.handle.net/11449/105673.

Pełny tekst źródła
Streszczenie:
Resumo: O presente trabalho tem como objetivo a obtenção de óxidos de molibdênio e de tungstênio com propriedades texturais controladas, particularmente com elevadas áreas específicas. Tais óxidos serão posteriormente empregados como precursores nas sínteses de nitretos e carbetos de molibdênio e de tungstênio, materiais potencialmente promissores na decomposição catalítica da hidrazina em sistemas micropopulsivos de satélites. Sabe-se da literatura que uma rede inorgânica de óxidos pode ser proveniente de vários precursores. Visando alcançar o objetivo do trabalho proposto, procurou-se primei
Style APA, Harvard, Vancouver, ISO itp.
8

Björklund, Kajsa. "Microfabrication of Tungsten, Molybdenum and Tungsten Carbide Rods by Laser-Assisted CVD." Doctoral thesis, Uppsala University, Department of Materials Chemistry, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-1593.

Pełny tekst źródła
Streszczenie:
<p>Thin films of refractory metals and carbides have been studied extensively over many years because of their wide range of application. The two major techniques used are Chemical Vapour Deposition (CVD) and Physical Vapour Deposition (PVD). These can result in the deposition of two-dimensional blanket or patterned thin films. Laser-assisted Chemical Vapour Deposition (LCVD) can provide a maskless alternative for localised deposition in two and three dimensions. This thesis describes LCVD of micrometer-sized tungsten, molybdenum and tungsten carbide rods. The kinetics, phase composition and m
Style APA, Harvard, Vancouver, ISO itp.
9

Björklund, Kajsa. "Microfabrication of tungsten, molybdenum and tungsten carbide rods by laser-assisted CVD /." Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2001. http://publications.uu.se/theses/91-554-5197-7/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Williams, Paul Andrew. "The synthesis of novel tungsten precursors for the CVD of tungsten oxide." Thesis, University of Bath, 2000. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323568.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

Poon, Michael. "Deuterium retention in tungsten." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0008/MQ40899.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
12

Stewart, Lisa Joanne. "Tungsten-substituted DMSO reductase." Thesis, University of Nottingham, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.368244.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

Selcuk, Cem. "Reactive sintering of tungsten." Thesis, University of Nottingham, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405300.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
14

Laine, A. D. "Inverse photoemission of tungsten." Thesis, University of Liverpool, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380177.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
15

Christian, Joel B. "Tungsten fuel cell catalysts." Diss., Online access via UMI:, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Wilder, Corey B. "Study of tungsten(IV) and tungsten(VI) imido complexes synthesis, structural analysis, and reactivity /." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0011630.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

Buzi, Luxherta. "Influence of the Particle Flux on Surface Modifications of Tungsten." Thesis, Université de Lorraine, 2015. http://www.theses.fr/2015LORR0117/document.

Pełny tekst źródła
Streszczenie:
Le tungstène est le matériau choisi pour le divertor d'ITER en raison de ses propriétés thermiques et physiques. Les densités de flux et les énergies des particules, et la température de surface pourront varier de plusieurs ordres de grandeur le long de la surface du divertor, soit respectivement 1020-1024 m2s-1, 0.1-100 eV, et 370-1370K. Exposé à de telles conditions, le tungstène peut subir de l'érosion, des fissurations et d'autres modifications de surface affectant ses propriétés thermomécaniques. Une autre préoccupation est la rétention des atomes de tritium implantés dans la surface et l
Style APA, Harvard, Vancouver, ISO itp.
18

Martin, Jeffrey Thomas. "Organometallic nitrosyl hydrides of tungsten." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/27449.

Pełny tekst źródła
Streszczenie:
Although hydrides of metal carbonyls are widely known, the number of hydrides in the related family of metal nitrosyls is extremely small. The preparation of a series of nitrosyl hydrides from the treatment of [CpW(NO)I₂]₂ (Cp=ƞ⁵-C₅H₅) with Na[H₂Al(OCH₂CH₂OCH₃)₂] is described. The addition of one or two equivalents of the aluminum reagent results in the formation of [CpW(NO)IH]₂ or [CpW(NO)H₂]₂ respectively. The reaction of [CpW(NO)IH]₂ with a Lewis base (L=P(OPh)₃, P(OMe)₃, PPh₃ or PMe₃) gives the monometallic CpW(NO)IHL, while [CpW(NO)H₂]₂ reacts with P(OPh)₃ or P(OMe)₃ to yield [CpW(NO)HL]₂
Style APA, Harvard, Vancouver, ISO itp.
19

Segar, Richard William Moore. "Activated tungsten inert gas welding." Thesis, University of Cambridge, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.621314.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
20

Li, F. X. "Chemical vapour deposition of tungsten and tungsten silicide layers for applications in novel silicon technology." Thesis, Queen's University Belfast, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.269129.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

Verbrugghe, Nathalie. "Lithographie optique, dépôts de films minces de tungstène et trioxyde de tungstène dédiés aux capteurs de gaz semiconducteurs." Thesis, Littoral, 2019. http://www.theses.fr/2019DUNK0527/document.

Pełny tekst źródła
Streszczenie:
Porté par les préoccupations actuelles en matière de sécurité et de qualité environnementale ainsi que par les efforts de recherche entrepris dans ce domaine, le marché mondial des capteurs de gaz est en pleine expansion. Dans le contexte de la commercialisation d'un capteur de gaz, une phase d'amélioration de ses performances, et notamment de sa sensibilité et de sa stabilité, est naturellement nécessaire. Cependant, il s'avère également pertinent d'envisager d'en diminuer le coût de fabrication. Pour cela, il convient de développer une technologie utilisant d'une part des matériaux bas coût
Style APA, Harvard, Vancouver, ISO itp.
22

Dyson, Glynn. "The low-temperature chemical vapour deposition of tungsten carbide coatings utilising the pyrolysis of tungsten hexacarbonyl." Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/33243.

Pełny tekst źródła
Streszczenie:
A detailed study has been made of the atmospheric pressure chemical vapour deposition (CVD) of tungsten carbide coatings onto powder metallurgy (PM) BT42 grade high speed steel (HSS) indexable cutting tool inserts. The pyrolysis of tungsten hexacarbonyl (W(CO)6) deposition route was utilised in conjunction with a laboratory-scale hot-wall CVD reactor. After numerous coating runs, deposition conditions were established under which rudimentary tungsten carbide coatings could be deposited at 350°C. The characteristics of these coatings were determined using an established characterisation procedu
Style APA, Harvard, Vancouver, ISO itp.
23

Donati, George Luís. "Trends in tungsten coil atomic spectrometry." Winston-Salem, NC : Wake Forest University, 2010. http://dspace.zsr.wfu.edu/jspui/handle/10339/73044.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
24

Wahlberg, Sverker. "Nanostructured Tungsten Materials by Chemical Methods." Licentiate thesis, KTH, Funktionella material, FNM, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-42702.

Pełny tekst źródła
Streszczenie:
Tungsten based-materials are used in many different technical fields, particularly in applications requiring good temperature and/or erosion resistance. Nanostructuring of tungsten alloys and composites has the potential to dramatically improve the materials’ properties, enhancing the performance in present applications or enabling totally new possibilities. Nanostructured WC-Co composites have been the focus of researchers and industries for over two decades. New methods for powder fabrication and powder consolidation have been developed. However, the fabrication of true nanograined WC-Co mat
Style APA, Harvard, Vancouver, ISO itp.
25

Garner, Sally Elizabeth. "Ion insertion in tungsten trioxide electrodes." Thesis, University of Leicester, 1997. http://hdl.handle.net/2381/30079.

Pełny tekst źródła
Streszczenie:
The role of ion insertion into the electrochromic metal oxide WO3 has been studied using a combination of electrochemical, gravimetric and spectroscopic techniques. The electrochemical quartz crystal microbalance (EQCM) was used to investigate the effect of electrolyte composition by studying the identity of the cations and anions involved and the concentration of the electrolyte used. It was found that the effect of electrolyte concentration and choice of anion did not affect film reduction and re-oxidation. The two cations studied, Li- and Na+, however cause marked differences in film redox
Style APA, Harvard, Vancouver, ISO itp.
26

Potter, Frances Helen. "Surface studies of the tungsten bronzes." Thesis, University of Oxford, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357429.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
27

Parkin, G. "The chemistry of trimethylphosphine tungsten complexes." Thesis, University of Oxford, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355780.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
28

Wahlberg, Sverker. "Tungsten-Based Nanocomposites by Chemical Methods." Doctoral thesis, Stockholm, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-156604.

Pełny tekst źródła
Streszczenie:
Tungsten based-materials find use in many different fields of engineering, particularly in applications where good temperature and/or erosion resistance is important. Nanostructuring of tungsten composites is expected to dramatically improve the materials’ properties and enhancing the performance in present applications but also enabling totally new possibilities. Nanostructured WC-Co materials have been the focus of researchers and engineers for over two decades. New fabrication methods have been developed. But, the fabrication of true nanograined WC-Co composites is still a challenge. Nanost
Style APA, Harvard, Vancouver, ISO itp.
29

McLaren, M. G. "Ion bombardment induced deposition of tungsten." Thesis, University of Salford, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308526.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Whitby, Raymond Lee Derek. "Nanocomposites of carbon and tungsten disulphide." Thesis, University of Sussex, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.394897.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
31

Gardner, Jonathan. "Ferroelectricity in empty tetragonal tungsten bronzes." Thesis, University of St Andrews, 2017. http://hdl.handle.net/10023/10592.

Pełny tekst źródła
Streszczenie:
In this work, in-depth structural and electrical characterisation is used to study a family of “empty” tetragonal tungsten bronzes (TTBs), A2₄A1₂B1₂B2₈O₃₀. An initial investigation into the effect of the A1-cation size on the properties of empty Ba₄R₀.₆₇◻₁.₃₃Nb₁₀O₃₀ TTBs (where R is the A1-cation and R = La, Nd, Sm, Gd, Dy and Y; ◻ = vacancy) was performed. These were determined to be metrically tetragonal by powder x-ray diffraction, with decreasing R cation size inducing increased crystal anisotropy. This tetragonal structural distortion, driven by contraction in the ab-plane, is shown to st
Style APA, Harvard, Vancouver, ISO itp.
32

Deshpande, Pranav Kishore. "Infrared Processed Copper-Tungsten Carbide Composites." University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1025107651.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

Nitta, Koji. "Electrodeposition of tungsten from molten salts." Kyoto University, 2009. http://hdl.handle.net/2433/126410.

Pełny tekst źródła
Streszczenie:
Kyoto University (京都大学)<br>0048<br>新制・課程博士<br>博士(エネルギー科学)<br>甲第14961号<br>エネ博第204号<br>新制||エネ||46(附属図書館)<br>27399<br>UT51-2009-M875<br>京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻<br>(主査)教授 萩原 理加, 教授 尾形 幸生, 准教授 野平 俊之<br>学位規則第4条第1項該当
Style APA, Harvard, Vancouver, ISO itp.
34

Khosla, Chetna Templeton J. L. "Intermediate oxidation state tungsten acetylacetonate complexes." Chapel Hill, N.C. : University of North Carolina at Chapel Hill, 2009. http://dc.lib.unc.edu/u?/etd,2296.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--University of North Carolina at Chapel Hill, 2009.<br>Title from electronic title page (viewed Jun. 26, 2009). "... in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Chemistry." Discipline: Chemistry; Department/School: Chemistry.
Style APA, Harvard, Vancouver, ISO itp.
35

Belyaeva, A. I., A. A. Galuza, I. V. Kolenov, V. G. Konovalov, Alla Aleksandrovna Savchenko, and O. A. Skoryk. "Effect of sputtering on the samples of iter-grade tungsten preliminarilly irradiated by tungsten ions: optical investigations." Thesis, Національний науковий центр "Харківський фізико-технічний інститут", 2014. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48176.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Osman, Joseph Michael. "Optical switching and memory using tungsten oxide." Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2002. http://wwwlib.umi.com/cr/syr/main.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Kukkola, J. (Jarmo). "Gas sensors based on nanostructured tungsten oxides." Doctoral thesis, Oulun yliopisto, 2013. http://urn.fi/urn:isbn:9789526202082.

Pełny tekst źródła
Streszczenie:
Abstract The aim of this thesis is to study whether nanostructured particles of WO3 could be competitive counterparts of traditional, more bulky materials in resistive gas sensor applications. Pristine and various surface decorated derivatives of three different types of WO3 nanoparticles applied on the surface of lithographically defined Si chips were used in the work to analyse the electrical behaviour of thin films when exposed to different gas atmospheres. Nanosized particles of WO3, obtained by capillary force-induced collapse of porous anodic tungsten oxide in water, were demonstrated as
Style APA, Harvard, Vancouver, ISO itp.
38

Walker, Daniel James. "Fluorinations of tungsten and molybdenum carbonyl complexes." Thesis, University of Leicester, 1997. http://hdl.handle.net/2381/30011.

Pełny tekst źródła
Streszczenie:
The dimeric complexes (n5-C5H5)M(CO)3 2 (where M = W or Mo) and (H3C{ti5-C5H4})Mo(CO)3 2 have been treated with XeF2 in organic solvents. All three materials react to form air sensitive products which solid-phase IR studies show to contain highly oxidised metal carbonyl components. The product from the fluoridation of (H3C{T 5-C5H5})Mo(CO)3 2 is insufficiently stable in solution for it to be characterised further. 19F NMR studies show that (n5-C5H5)W(CO)3 2 reacts to form the new complex (T 5-C5H5)WF5, but that the molybdenum analogue reacts to form an unidentified product which, although it p
Style APA, Harvard, Vancouver, ISO itp.
39

Hong, Kunquan. "Synthesis of one-dimensional tungsten oxide nanostructures." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/HKUTO/record/B39558551.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
40

洪昆權 and Kunquan Hong. "Synthesis of one-dimensional tungsten oxide nanostructures." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B39558551.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
41

Hu, Rong, and 胡蓉. "Synthesis and characterization of tungsten oxide nanostructures." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B41508774.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
42

Espinosa, Daniel C. "Visualization of gas tungsten arc weld pools." Thesis, Monterey, California. Naval Postgraduate School, 1991. http://hdl.handle.net/10945/28643.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
43

Thiebaut, Benedicte. "Co-ordinatively unsaturated complexes of tungsten (II)." Thesis, Heriot-Watt University, 1998. http://hdl.handle.net/10399/606.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
44

Bain, Michael. "The deposition and characterisation of CVD tungsten." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326383.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
45

Macpherson, I. "Some metallaborane chemistry of molybdenum and tungsten." Thesis, University of Leeds, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376799.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
46

Polya, D. A. J. "Chemical behaviour of tungsten in hydrothermal fluids." Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378304.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
47

Shen, Peikang. "A study of modified tungsten trioxide electrodes." Thesis, University of Essex, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315727.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Shonfield, Peter K. A. "Molybdenum and tungsten complexes for moleular electronics." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264635.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

Thummavichai, Kunyapat. "Tungsten oxide nanostructures and their electrochromic performance." Thesis, University of Exeter, 2018. http://hdl.handle.net/10871/33858.

Pełny tekst źródła
Streszczenie:
The electrochromic behaviour of tungsten oxide (WOx) bulk forms has attracted huge research interest for decades owing to advantages of fast response time, good reversibility and high colouration efficiency compared with other electrochromic materials. Nanomaterials have certainly brought in new opportunities and opened the door for better, higher and smarter devices fabrication. This thesis will first investigate, explore, and understand the electrochromic performance of WOx in the nanoscale, and identify ways to enhance its performance via effective doping electrolyte selection and heat trea
Style APA, Harvard, Vancouver, ISO itp.
50

Kelley, Andrew III. "Tungsten carbide-cobalt by Three Dimensional Printing." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/32316.

Pełny tekst źródła
Streszczenie:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1998.<br>Includes bibliographical references (p. 69-70).<br>Three Dimensional Printing is an additive manufacturing process for rapid prototyping ceramic and metallic parts [Sachs, et al, 1990]. Green (not sintered) tungsten carbide-cobalt parts must have a density greater than 50% of the theoretical density, 14.9 g/cc, for proper sintering and post-processing. Two approaches were assessed for feasibility and robustness: printing slurry into tungsten carbide-cobalt spray dried powder and printing a solvent i
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!