Gotowe bibliografie tematyczne / Wax Mould

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Wax Mould”

Autor: Grafiati

Data publikacji: 2 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Wax Mould”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Wax Mould"

Najaf Zadeh, Hossein, Tim Huber, Volker Nock, Conan Fee, and Don Clucas. "Complex Geometry Cellulose Hydrogels Using a Direct Casting Method." Bioengineering 7, no. 2 (2020): 58. http://dx.doi.org/10.3390/bioengineering7020058.

Pełny tekst źródła

Streszczenie:

To facilitate functional hydrogel part production using the indirect wax mould method, it is necessary to understand the relationships between materials, process and mould removal. This research investigated the thermophysical properties, wettability and surface roughness of wax template moulds in the production of cellulose hydrogel objects. Cellulose gel was thermally formed and shaped in three different wax moulds—high melting point paraffin, sacrificial investment casting wax and Solidscape® wax—by physical cross-linking of polymer networks of cellulose solution in NaOH/urea aqueous solven

Style APA, Harvard, Vancouver, ISO itp.

Rose, Thomas, Peter Fabian, and Yuval Goren. "The (in)visibility of lost wax casting moulds in the archaeological record: observations from an archaeological experiment." Archaeological and Anthropological Sciences 15 (February 22, 2023): 31. https://doi.org/10.1007/s12520-023-01731-6.

Pełny tekst źródła

Streszczenie:

Apart from mould and core remnants attached to metal objects from the Chalcolithic Southern Levant (ca. 4500–3800 BCE), production remains of early lost wax casting are seemingly invisible in the archaeological record. An experiment using reproduced casting moulds was performed to simulate the Chalcolithic processes to investigate whether the moulds might have deteriorated to an unrecognisable state after the casting process. Results from previous studies on mould remains attached to metal objects were complemented with ethnographical accounts for the experimental set-up. The moulds were

Style APA, Harvard, Vancouver, ISO itp.

Rose, Thomas, Shay Bar, Yotam Asscher, and Yuval Goren. "Identification of Fazael 2 (4000–3900 BCE) as first lost wax casting workshop in the Chalcolithic Southern Levant." Heritage Science 11 (September 6, 2023): 192. https://doi.org/10.1186/s40494-023-01029-9.

Pełny tekst źródła

Streszczenie:

Apart from many lost wax cast metal fragments, crucible fragments and several heated sediment nodules were found at the Chalcolithic site Fazael 2 (central Jordan Valley). Petrographic investigations on the heated sediment nodules revealed many features characteristic of the Chalcolithic Southern Levantine lost wax casting moulds. Heating temperatures were assessed using infrared spectroscopy, showing that casting did not vitrify the clay fraction in the moulds. Consequently, Fazael is the first identified Chalcolithic Southern Levant production site for lost wax cast metal items. These findin

Style APA, Harvard, Vancouver, ISO itp.

Yengkhom, Indibor singh. "Ir-192 pellet source HDR brachytherapy using wax surface mould applicators in head and neck cancer: A single institute experience." Journal of Clinical Oncology 31, no. 15_suppl (2013): e17029-e17029. http://dx.doi.org/10.1200/jco.2013.31.15_suppl.e17029.

Pełny tekst źródła

Streszczenie:

e17029 Background: Surface mould brachytherapy is suitable for radiation treatment of superficial lesions in head and cancer and it is the choice of radiotherapy technique. Various isotopes viz, Radium, Cs-137, Ir-192 wire, co-60, Sr-90 has been used. Earlier customized acrylic mould with hollow needle or catheters were used. With the advent of Ir-192 HDR pellet source we used tissue equivalent thermo malleable wax surface moulds. Single plane was used but in lips, pinna and ala of nose double planar sandwich technique was used with good dosimitry and cosmetic effect. BED is calculated by usin

Style APA, Harvard, Vancouver, ISO itp.

Kolczyk, J., J. Zych, and Ł. Jamrozowicz. "Influence of the Al2O3 Solid Phase on the Kinetics of Binding Ceramic Moulds." Archives of Foundry Engineering 17, no. 4 (2017): 91–96. http://dx.doi.org/10.1515/afe-2017-0136.

Pełny tekst źródła

Streszczenie:

Abstract The investigation results of the kinetics of binding ceramic moulds, in dependence on the solid phase content in the liquid ceramic slurries being 67, 68 and 69% - respectively, made on the basis of the aqueous binding agents Ludox AM and SK. The ultrasonic method was used for assessing the kinetics of strengthening of the multilayer ceramic mould. Due to this method, it is possible to determine the ceramic mould strength at individual stages of its production. Currently self-supporting moulds, which must have the relevant strength during pouring with liquid metal, are mainly produced

Style APA, Harvard, Vancouver, ISO itp.

Zych, J., J. Kolczyk, and T. Snopkiewicz. "New Investigation Method of the Permeability of Ceramic Moulds Applied in the Investment Casting Technology / Nowa metoda oceny przepuszczalności form ceramicznych stosowanych w technologii wytapianych modeli." Archives of Foundry Engineering 13, no. 2 (2013): 107–12. http://dx.doi.org/10.2478/afe-2013-0047.

Pełny tekst źródła

Streszczenie:

Abstract The new investigation method of a permeability of ceramic moulds applied in the investment casting technology, is presented in the paper. Some concepts of performing permeability measurements are shown. Investigations in which the influence of the solid phase fraction in the liquid ceramic moulding sand (LCMS) on a permeability of a multi-layer ceramic mould were performed and discussed. The permeability was estimated during two the most important stages of the technological process: in the first - after wax melting and in the second - after mould annealing. Also an influence of the m

Style APA, Harvard, Vancouver, ISO itp.

Liang, Bo, Ye Yang, and Junping Li. "Research progress of water-based release agents." MATEC Web of Conferences 358 (2022): 01033. http://dx.doi.org/10.1051/matecconf/202235801033.

Pełny tekst źródła

Streszczenie:

A mould release agent is an additive that makes the moulded product easy to detach from the mould, it forms a protective film on the product to ensure the surface quality of the mould. Mold release agents are divided into water-based release agents, oil-based release agents and powder-based release agents. Water-based release agents are widely used because they have the advantages of low price, good release effect, green environment protection, smooth casting surface, good air tightness and good automaticity operation. According to the effective release material in the mold, release agent can

Style APA, Harvard, Vancouver, ISO itp.

Żaba, Krzysztof, Dawid Gracz, Tomasz Trzepieciński, et al. "Application of X-Ray Computed Tomography to Identify Defects in Lost Wax Ceramic Moulds for Precision Casting of Turbine Blades." Materials 17, no. 20 (2024): 5088. http://dx.doi.org/10.3390/ma17205088.

Pełny tekst źródła

Streszczenie:

This article presents the results of testing the suitability of X-ray computed tomography for the quality control of the casting moulds used for producing turbine blades. The research was focused on the analysis of cross-sectional images, spatial models and the porosity of moulds using a Phoenix L 450 microtomograph. The research material consisted of samples from three mixtures of ceramic materials and binders intended for producing casting moulds using the lost wax method. Various configurations of filling materials (Molochite and quartz flours) and binder (Remasol, Ludox PX 30 and hydrolyse

Style APA, Harvard, Vancouver, ISO itp.

Guler, Kerem Altug, and Mustafa Cigdem. "Casting Quality of Gypsum Bonded Block Investment Casting Moulds." Advanced Materials Research 445 (January 2012): 349–54. http://dx.doi.org/10.4028/www.scientific.net/amr.445.349.

Pełny tekst źródła

Streszczenie:

In this study surface finish and dimensional charactersitics of castings produced with gypsum bonded block investment moulds were investigated. Commercial and laboratory made gypsum bonded investment moulds were used for investment casting mould making. To compare the casting quality of the investment powders, wax patterns for surface roughness specimens and linear dimension measurement specimens were designed and produced with special geometry. Wax trees were assembled with these patterns, cylindrical stainless steel perforated flasks were settled around the trees and gypsum bonded investment

Style APA, Harvard, Vancouver, ISO itp.

Nawrocki, Jacek, Dariusz Szeliga, Krzysztof Kubiak, Hubert Matysiak, Maciej Motyka, and Waldemar Ziaja. "Influence of Process Parameters on Cooling Conditions in Nickel Base Superalloy Investment Casting." Key Engineering Materials 641 (April 2015): 124–31. http://dx.doi.org/10.4028/www.scientific.net/kem.641.124.

Pełny tekst źródła

Streszczenie:

The published results of the research on crystallization process of nickel base superalloy castings rarely take into account the effect of the wall thickness of the casting. Current study presents a comprehensive assessment of the impact of molten alloy temperature, mould temperature, mould thermal insulation and casting diameter on crystallization process of polycrystalline nickel base superalloy. Research was designed and conducted as an factorial experiment at two levels. Different diameter samples were designed and optimised by the numerical simulation of solidification process using ProCA

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Wax Mould"

Njombolwana, Ncumisa Shelly. "Imazalil and wax coating application in citrus packhouses to control green mould and preserve fruit quality." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/20419.

Pełny tekst źródła

Streszczenie:

Thesis (MScAgric)--Stellenbosch University, 2012. ENGLISH ABSTRACT: Green mould is a major citrus postharvest disease caused by a wound pathogen called Penicillium digitatum. Imazalil (IMZ) is the most important postharvest fungicide that is currently registered against green mould and blue mould, given its good protective and curative control and sporulation inhibition. Imazalil can be applied in drench, dip, spray and wax coating applications. Wax coatings improve the quality of the fruit during shelf life by limiting moisture loss and providing a shiny appearance. The primary objective o

Style APA, Harvard, Vancouver, ISO itp.

Dostál, Pavel. "Nové směry v konstrukci a výrobě forem pro voskové odlitky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227940.

Pełny tekst źródła

Streszczenie:

The aim of this work is to compare technology of silicon and aluminium moulds used to make castings using technology of cire perdue with single – piece work. The work itself deals with physical production of silicon mould in vacuum casting system, shaping aluminium mould using CNC machine and subsequent casting of wax models into these moulds. It also handles with physical production of one piece by shaping. It contains background research of the method lost wax casting manufacturing aluminium and silicon moulds and last but not least of Rapid Prototyping technology for producing master model.

Style APA, Harvard, Vancouver, ISO itp.

Kosour, Vojtěch. "Technologie rychlého prototypování za použití metody FDM a současně technologie vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228152.

Pełny tekst źródła

Streszczenie:

An overview of the development of the Investment Casting market and Rapid Prototyping equipment is given in the introductory part of this diploma thesis. Basic methods of rapid prototyping and the FDM method are futher described in detail. The FDM method is consequently used in the practical part of this work for the preparation of the silicon mould. The largest part deals with the issue of the simulation of pouring process of wax into the silicon mould. A characteristics of the casting wax is made; the parametres, which are inserted into the simulation software ProCAST and the possibilities o

Style APA, Harvard, Vancouver, ISO itp.

Šmíd, Jiří. "Možnosti uplatnění moderních metod při výrobě prototypových odlitků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229708.

Pełny tekst źródła

Streszczenie:

The introduction part of the thesis focuses on the overview of rapid prototyping in foundry industry. Principles of the most important RP methods are described and the FDM method is analyzed in more detail. This method was used in the practical part for the production of wax patterns with silicone moulds. The wax patterns were used for the production of castings using the lost wax method. The result of this work is determination of dimensional changes during the whole process of casting manufacture from the drawing to the final casting.

Style APA, Harvard, Vancouver, ISO itp.

Schaub, Henning. "Comparison of different aluminium casting processes from an environmental perspective : Case study on plaster mould castings produced in Mid Sweden." Thesis, Mittuniversitetet, Avdelningen för ekoteknik och hållbart byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-35659.

Pełny tekst źródła

Streszczenie:

While Aluminium has lots of unique properties and is seen as a material of the future, its production and manufacturing has significant environmental impacts. For complex and dimensional shapes casting remains the main manufacturing method and in this study the environmental pressure of different casting techniques is compared. A screening LCA is conducted to determine the environmental impacts of plaster mould castings in a case study at the Ventana Hackås AB foundry in Mid Sweden. The findings are compared to models of sand, pressure die and lost wax castings, based on literature datasets. T

Style APA, Harvard, Vancouver, ISO itp.

Soukupová, Lucie. "Optimalizace technologie výroby odlitků ze slitin Al metodou vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230978.

Pełny tekst źródła

Streszczenie:

Diploma thesis is focused to the optimization of the ceramic shell for pouring thin walled aluminium castings by investment casting technology. The main objective is firstly to find the optimal binding system (ceramic slurry) and stucco materials for the shell and secondly its optimal structure and heat treatment (drying of each coat and final shell firing) before metal pouring.

Style APA, Harvard, Vancouver, ISO itp.

Fendrich, Tomáš. "Návrh technologie výroby vstřikovací formy pro přesné lití." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417472.

Pełny tekst źródła

Streszczenie:

The diploma thesis deals with the design and production of an aluminum injection mold for investment casting. The work briefly describes the technology of investment casting together with a description of the types of molds, their internal arrangement and the most commonly used materials. Another part of the work is devoted to the analysis of aluminum molds machining. Emphasis was placed mainly on those operations, that will be used in production of mold. The practical part describes in detail the process of designing the model and mold, as well as the process of designing production technolog

Style APA, Harvard, Vancouver, ISO itp.

Su, Sheng-Jie, and 蘇聖傑. "Rapid Manufacturing Technology for Precision Low Pressure Wax Injecting Mold." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/78759220144892972587.

Pełny tekst źródła

Streszczenie:

碩士 明志科技大學 機電工程研究所 100 A low pressure wax injecting mold can be fabricated by use of fused deposition modeling rapid prototyping, whereas, the surface precision of the rapid mold fabricated is not preferred. In the study, a new technique is proposed for rapid manufacturing a low pressure wax injection mold with high surface finish and high dimensional accuracy. In the experiment results, it is found that after padding the wax pattern fabricated by low pressure wax injection mold, the center line average surface roughness Ra value can be improved from 1710 µm to 276 µm, so the surfac

Style APA, Harvard, Vancouver, ISO itp.

Tseng, Chen Xian, and 曾丞賢. "Study on the Restrictive Shrinkage of the Wax Injection Mold Cavity for Investment Casting Process." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/98918067761326046502.

Pełny tekst źródła

Streszczenie:

碩士 國立高雄應用科技大學 模具工程系碩士班 96 The restrictive shrinkage of the pattern wax by the mold cavity of the wax injection mold has been studied. The basic ideas of designing wax injection mold, the pattern wax, the shrinkage characteristics of ceramic shell mold and casting alloys have been investigated, and then, the shrinkage factors were adjusted to calculate practically the mold cavity dimension. The shrink allowances of pattern waxes and casting alloys were obtained by the test of standard test blocks during the experiments. The experiment was divided in three parts: (1) In order to obta

Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Wax Mould"

Ure, Jean. War with Old Mouldy! Methuen Children's, 1987.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vos, Peter, Michiel Meulen, Henk Weerts, and Bazelmans, eds. Atlas of the Holocene Netherlands. Amsterdam University Press, 2020. http://dx.doi.org/10.5117/9789463724432.

Pełny tekst źródła

Streszczenie:

The landscape of the Netherlands has been changing constantly since the end of the last ice age, some 11,700 years ago. Where we walk today was once a polar desert, a river delta or a shallow sea. The end of the last ice age marked the beginning of a new geological period - the Holocene, the relatively warm geological epoch in which we are still living today. The Atlas of the Holocene Netherlands contains special maps, supplemented by archaeological and historical information. These maps show the geographical situation for thirteen different points in time since the last ice age, based on tens

Style APA, Harvard, Vancouver, ISO itp.

Fine Art Metal Casting: An Illustrated Guide to Mould Making and Lost Wax Processes. Robert Hale Limited, 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ure, Jean. War with Old Mouldy. Methuen young books, 1987.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

(Illustrator), Alice Englander, ed. War with Old Mouldy. Mammoth, 1989.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

MOLD: The War Within. Partners Publishing LLC, 2007.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hunger, Chrissy. Mold: War of Seasons Book Two. abardhippo, 2022.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Relics of the mound builders. s.n., 1986.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

A Survey of a Grassy Mound at Aldridge Cricket Club. WAG Project No 1. Wolverhampton Archaeology Group, 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Videla, Fabian. Breaking the Mold - EBOOK: Remodeling Your Way to Success. Independent Publisher, 2022.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Wax Mould"

Guo, Fuqiang, Gangtie Li, Shichao Chen, Xia Yang, Yizhen Huo, and Jinxiang Bai. "Study on Insulation and Anti-frost Heave Effect of Polystyrene Board Under the Condition of Mold Bag Concrete." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_40.

Pełny tekst źródła

Streszczenie:

AbstractAs a new lining technology, mould bag lining technology has been widely used in recent years. In this paper, the channel frost heave in Hetao irrigation area of Inner Mongolia was studied and a field in-situ test platform was established. The experimental study on the insulation and anti-freeze of polystyrene board under the condition of concrete bag with different thickness was carried out by setting the concrete bag with different thickness and the test block of polystyrene board with different thickness. The research shows that the total accumulated temperature increases by 3.93%~9.

Style APA, Harvard, Vancouver, ISO itp.

Elliott, Christine. "Paul Hamlyn: British Publishing Mould Breaker." In The Coffee-Table Book in the Post-War Anglophone World. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-38902-3_7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hurst, Steve. "3. Flexible moulds for the mass-production of wax patterns." In Metal Casting. Practical Action Publishing, 1996. http://dx.doi.org/10.3362/9781780442792.003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rabhi, F., G. Cheng, and T. Barriere. "Modeling of Viscoelasticity of Thermoplastic Polymers Employed in the Hot Embossing Process." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-58006-2_19.

Pełny tekst źródła

Streszczenie:

AbstractThe manufacturing of micro-scale components requires mastery of shaping processes ranging from micromechanics to electronic microfabrication. The hot embossing (HE) process is widely developed in various fields, since it allows to emboss complex structures at the micro/nanoscale such as optical sensors, diffractive lenses, microfluidic channels, and so on. The development of micro-structured parts via this process requires an in-depth analysis of the surface quality obtained and the mold filling rate. It is essential to analyze the influence of polymer properties to optimize the final

Style APA, Harvard, Vancouver, ISO itp.

Martin-Doñate, Cristina, Sliman Shaikheleid, Abelardo Torres-Alba, and Jorge Manuel Mercado-Colmenero. "A New Smart Web Platform for Plastic Injection Molds in Industry 4.0 Environments." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_49.

Pełny tekst źródła

Streszczenie:

AbstractThis paper presents a new smart web platform for plastic injection molds for use in industry 4.0 environments. The new platform requires as its only input the CAD model of the plastic part in a discrete format, the accuracy of the analysis, the thermoplastic material of which the part will be manufactured and the number of parts to manufacture per year. Using this information and through a fully automated process based on hybrid algorithms developed by the authors the smart platform generates an extended CAD model of the mold with additional expert information useful for industry 4.0 e

Style APA, Harvard, Vancouver, ISO itp.

Cunha, Sandra, Raphael Silva, and José Aguiar. "Cement Mortars with Incorporation of Foundry Industry Wastes: Physical, Mechanical and Durability Behavior." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_10.

Pełny tekst źródła

Streszczenie:

AbstractPlanet Earth is facing real challenges that require urgent and significant measures. It is necessary to give a new direction to the construction sector, making it essential to change the way that raw material is selected, giving preference to industrial by-products. The utilization of industrial wastes allows minimize the high consumption of natural raw materials, energy consumption and waste deposition in landfills. It is important to note that the use of waste in the construction industry is a great opportunity, however, the heterogeneity of these materials and sometimes their contam

Style APA, Harvard, Vancouver, ISO itp.

Moser-Ernst, Sybille. "A brief reflection on the question Was Gombrich “in the academic mould”?" In ART and the MIND – Ernst H. GOMBRICH. V&R unipress, 2018. http://dx.doi.org/10.14220/9783737007948.273.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wang, Xingjia, Yang Li, and Yilin Huang. "Digital High-Precision Wax Mold Casting Workshop Based on Internet of Things." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0416-7_11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jayatilake, Dimanthi, and Venura Herath. "Breaking the Mold: Pave the Way for Future Cereals." In Agricultural Research for Sustainable Food Systems in Sri Lanka. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2152-2_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gale, Ella, and Andrew Adamatzky. "Translating Slime Mould Responses: A Novel Way to Present Data to the Public." In Advances in Physarum Machines. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-26662-6_35.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Wax Mould"

Zhu, Jia, Shiqiang Zhang, Ting Xu, and Quan Zhang. "A wax printed mold for prototyping microfluidic devices." In 3rd International Conference on Advanced Manufacturing Technology and Manufacturing Systems (ICAMTMS 2024), edited by Dailin Zhang and Ke Zhang. SPIE, 2024. http://dx.doi.org/10.1117/12.3039379.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Cassidy, Patrick, Jason Lee, Charles White, and Michael Kibler. ""Mold and Mildew Investigation and Testing of Navy Interior Coatings"." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-18804.

Pełny tekst źródła

Streszczenie:

Abstract Mold and mildew within Navy ships is a significant issue across the fleet. In 2021 a program was initiated to characterize the extent of the issues and develop mold remediation and preventative processes and technologies. This paper will review the findings of ship inspections performed to determine the extent of mold issues across the Navy and present data on the development and testing of Navy interior coatings with fungistatic additives. In this effort, 26 ships were inspected and sampled across 6 naval bases. The ship inspections determined the most common ship spaces for mold gro

Style APA, Harvard, Vancouver, ISO itp.

Lunder, Otto, Terje Kr Aune, and Kemal Nisancioglu. "The Effect of Mn Additions on the Corrosion Behavior of Mould-Cast Magnesium Alloy AZ91." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85382.

Pełny tekst źródła

Streszczenie:

Abstract One of the major causes of magnesium corrosion is the presence of iron in commercial alloys as an impurity. A possible way of reducing the corrosion rate down to acceptable levels is to alloy the material with manganese. The corrosion rate of a Mg-9% Al-1% Zn alloy, containing varying amounts of Mn and Fe, is correlated with the Fe/Mn ratio in the alloy and in the aluminum-base intermetallics. The ratio is shown to be the basic parameter determining the corrosion rate for a given thermo-mechanical history.

Style APA, Harvard, Vancouver, ISO itp.

Rajkumar, Yeshwanth Raj, Siamack A. Shirazi, Hadi Arabnejad, Krishnaraj Sambath, Soroor Karimi, and Hariprasad J. Subramani. "An Experimental Investigation of Ductile Material Deformation as a Result of Single Particle Impacts." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19438.

Pełny tekst źródła

Streszczenie:

Abstract As a particle impinges the target surface, a crater and a mound around the crater are formed. The size of the crater and the mound varies with particle parameters such as particle size, shape, impact velocity, and angle. The particle impact velocities were measured using a Particle Image Velocimetry (PIV) system. A microscopic surface profiler measured the depths and volumes of the crater and the mounds formed on the surface. Deep and narrow craters were observed on the surface when impacted by sharp particles. However, for round particles, the craters were found to be wider and more

Style APA, Harvard, Vancouver, ISO itp.

Iijima, K., A. Yoshinari, T. Ishida, T. Yasuda, H. Matsuzaki, and K. Shimomura. "Processing of a Single Crystal Casting for Heavy-Duty Gas Turbine Blades: Creep and Metal/Mould Reaction Behavior of Al2O3-SiO2 Shell Mould." In ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/93-gt-272.

Pełny tekst źródła

Streszczenie:

Al2O3-SiO2 moulds have been adopted successfully as shell moulds for a single crystal casting for jet engine blades. Heavy-duty gas turbine blades also have large dimensions and complex features comparable to those of jet engines. Then shell moulds should be subjected to similar severe service conditions when casting heavy-duty gas turbine blades. Creep behavior of 90mol%Al2O3+10mol%SiO2, which was manufactured through the lost wax process by using fused Al2O3 powder (average particle size, 15 μ m), was studied at temperatures of 1450 to 1550 °C. in four-point bending creep tests. Creep deflec

Style APA, Harvard, Vancouver, ISO itp.

Walsh, K. P., D. G. Boyle, and D. I. Wimpenny. "Investment Cast Biomedical Implants From Rapid Prototyping and Tooling Techniques." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2554.

Pełny tekst źródła

Streszczenie:

Abstract Traditionally investment casting of biomedical implants has utilized the lost wax process, this paper is an investigation into the possibilities of casting small lots of custom specific medical implants directly and indirectly from various rapid prototyping & tooling techniques. Small batch quantities for quick turn arounds cost and lead times are the main contributing factors for the purpose of this investigation. To directly produce parts means that a RP model will be used in the place of the wax pattern in the investment casting process. To indirectly produce parts means that a

Style APA, Harvard, Vancouver, ISO itp.

Gu¨mu¨s¸, Beril, and Bu¨lent Ekici. "A New Sheet Die Design Methodology to Eliminate Scrap Shedding Problems During Mass Production." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-25024.

Pełny tekst źródła

Streszczenie:

Manufacturing companies need to improve their production technology with improved dimensional accuracy at lower cost in order to manufacture sheet metal based products. Scrap shedding is an issue that should be examined at the cutting and sheet metal forming operations. In order to extend the life cycle of the cutting moulds, scrap shedding should be identified. When scrap shedding has not been taken into consideration, scraps have accumulated in the moulds reducing the production quality and causing deformation of the mould, increasing the production cost by obligating to perform extra transa

Style APA, Harvard, Vancouver, ISO itp.

Courbebaisse, G., D. Garcia, and P. Bourgin. "A Way Towards Optimization of Injection Molding." In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45763.

Pełny tekst źródła

Streszczenie:

Injection molding of thermoplastic is a complex process essentially because of the physical properties of the polymers, the processing conditions and the mold geometry. One key issue is to find the optimal location of the injection point(s) so that to minimize the final pressure required to fill the mould. This is usually achieved by using commercial computer codes, which are time consuming. Our approach, which is not classical, consists in introducing several “geometrical tools” of image analysis such as optimal centering and skeleton transformation, to characterize the shape properties of th

Style APA, Harvard, Vancouver, ISO itp.

ROCHE, Louis. "Thermodynamic model using Kelvin decomposition to predict the mechanical behaviour of single-crystal superalloys after casting operation." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-205.

Pełny tekst źródła

Streszczenie:

Abstract. The manufacturing of single crystal nickel-based superalloys components, such as turbine blades, using the lost-wax casting method is a complex process that can generate various defects. Among them, the recrystallisation defect, which is the focus of this study, occurs during solidification. This defect is characterised by the formation of highly misoriented grains, leading to a significant degradation of mechanical properties. The formation of these grains is partly attributed to the introduction of plastic strain in the alloy during cooling, caused by the difference in thermal expa

Style APA, Harvard, Vancouver, ISO itp.

Chen, Yu, Liang Zhou, Yang Yang, and Xiaohai Qu. "Exploration on the Integrated Teaching Construction of Mould Assembly and Adjustment Course Based on Information Technology." In 2021 World Automation Congress (WAC). IEEE, 2021. http://dx.doi.org/10.23919/wac50355.2021.9559541.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Wax Mould"

Løvschal, Mette, Havananda Ombashi, Marianne Høyem Andreasen, et al. The Protected Burial Mound ‘Store Vejlhøj’, Vinderup, Denmark: First Results. Det Kgl. Bibliotek, 2023. http://dx.doi.org/10.7146/aulsps-e.479.

Pełny tekst źródła

Streszczenie:

An archaeological excavation of the protected burial mound Store Vejlhøj in northwestern Denmark was carried out in October-November 2021. The excavation formed part of the ERC-funded research project called ANTHEA, focusing on the deep history of anthropogenic heathlands. It was conducted by Aarhus University in collaboration with Holstebro Museum and Moesgaard Museum. The aim was to test a new method of sampling pollen data from different construction stages in a burial mound and comparing them with pollen data from nearby lake sediments with a view to improving our understanding of prehisto

Style APA, Harvard, Vancouver, ISO itp.

Bylgaeva, A. A. EFFICIENT AND ENVIRONMENTALLY FRIENDLY WAY OF DEALING WITH MOULDY HAY AND HAYLAGE IN THE FAR NORTH. МЦНС «Наука и Просвещение», 2017. http://dx.doi.org/10.18411/978-5-907023-2017-240-244.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sekki, Pauli, Eero Saleva, and Pekka Laamanen. Study of ventilated low-slope and large span wooden element roofs in the current and future climate. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541620957.

Pełny tekst źródła

Streszczenie:

Finland's building regulations and guidelines rely on ventilation to ensure the hygrothermal performance of structures. For wooden roofs, height of ventilation cavity and area of ventilation openings have been determined depending on roof slope and roof area in guideline. This causes difficulties in practical implementation in low-slope roofs with large span, because the guideline leads to large ventilation openings that can be challenging to be implemented. In practice, roof element suppliers have produced roofs with slightly smaller height of ventilation cavities and areas of ventilation ope

Style APA, Harvard, Vancouver, ISO itp.

Høegh, Britt Haker, Lies Vanhouttegehem, and Thor Hansen. Documentation of moisture reduction up to two years after refurbishment of moisture damaged exterior basement wall. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541578714.

Pełny tekst źródła

Streszczenie:

In Denmark, many old buildings are constructed with massive masonry basement walls. Originally, these basements were used for storage or as boiler room. Hence moisture in the basement walls was not considered a problem, and moisture protection of basement constructions was not considered necessary. However, leaving older buildings basement walls exposed to moisture from the surrounding soil, results in a high risk for damage and mould growth on the interior surface of the exterior basement walls. Today, many of these basements are used for daily purposes. Accordingly, moisture problems in the

Style APA, Harvard, Vancouver, ISO itp.

Sun, S., F. R. Brunton, T. R. Carter, et al. Porosity and permeability variations in the Silurian Lockport Group and A-1 carbonate unit, southwestern Ontario. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331902.

Pełny tekst źródła

Streszczenie:

This is the first regional porosity/permeability study to incorporate petroleum industry laboratory core analyses submitted to the Ontario government and managed by Ontario's Oil Gas and Salt Resources Library. This study comprises 11,759 analyses for the Early Silurian Lockport Group of southwestern Ontario from 150 drill cores. The Lockport Group consists of a cyclic succession of dolostones and minor limestones comprising, in ascending order: Gasport, Goat Island, Eramosa, and Guelph formations. This stacked carbonate succession was deposited on an eastward-deepening carbonate ramp, extendi

Style APA, Harvard, Vancouver, ISO itp.

Petrausch, Julius, Daniel Klein, Johannes Zimmer, and Markus Stommel. On the cryo-molding process and subsequent forming processes of biopolymers with low glass transition temperature. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.ss.bbb.10.

Pełny tekst źródła

Streszczenie:

Bio-based as well as biodegradable polymers are increasingly finding their way into applications such as food packaging. Here, certain biopolymers with a high degree of crystallinity may be of interest due to their superior barrier properties. Conversely, forming processes including high deformations often require an almost amorphous material state to avoid the brittle behavior associated with crystal structures. For some of those biopolymers, the narrow window in which they can be processed has delayed their potential use for packaging applications. In rigid packaging, two-step processes are

Style APA, Harvard, Vancouver, ISO itp.

Solanki, Pranshoo, Haiyan Xie, John Awaitey, and Tejaswi Reddy. State-of-the-Practice Review of Field-Curing Methods for Evaluating the Strength of Concrete Test Specimens. Illinois Center for Transportation, 2023. http://dx.doi.org/10.36501/0197-9191/23-003.

Pełny tekst źródła

Streszczenie:

The American Association of State Highway and Transportation Officials (AASHTO) T 23 standard provides instructions for making and curing concrete test specimens in the field. However, further research is needed to compare the strength of the field-cured specimen with the strength of the actual in-place concrete item. The purpose of this research is to build an understanding of the current state of the practice for field-curing methods. Specifically, the research team conducted a literature review and questionnaire survey to identify the selection criteria and details of field-curing methods.

Style APA, Harvard, Vancouver, ISO itp.

Lichter, Amnon, Joseph L. Smilanick, Dennis A. Margosan, and Susan Lurie. Ethanol for postharvest decay control of table grapes: application and mode of action. United States Department of Agriculture, 2005. http://dx.doi.org/10.32747/2005.7587217.bard.

Pełny tekst źródła

Streszczenie:

Original objectives: Dipping of table grapes in ethanol was determined to be an effective measure to control postharvest gray mold infection caused by Botrytis cinerea. Our objectives were to study the effects of ethanol on B.cinerea and table grapes and to conduct research that will facilitate the implementation of this treatment. Background: Botrytis cinerea is known as the major pathogen of table grapes in cold storage. To date, the only commercial technology to control it relied on sulfur dioxide (SO₂) implemented by either fumigation of storage facilities or from slow release generator pa

Style APA, Harvard, Vancouver, ISO itp.

Watad, Abed A., Paul Michael Hasegawa, Ray A. Bressan, Alexander Vainstein, and Yigal Elad. Osmotin and Osmotin-Like Proteins as a Novel Source for Phytopathogenic Fungal Resistance in Transgenic Carnation and Tomato Plants. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7573992.bard.

Pełny tekst źródła

Streszczenie:

The goal of this project is to enhance fungal resistance of carnation and tomato through the ectopic expression of osmotin and other pathogenesis-related (PR) proteins. The research objectives were to evaluate in vitro antifungal activity of osmotin and osmotin and other PR protein combinations against phytopathogens (including Fusarium oxysporum, Verticillium dahliae, Botrytus cinerea or Phytophthora infestans), develop protocols for efficient transformation of carnation and tomato, express PR proteins in transgenic carnation and tomato and evaluate fungal resistance of transgenic plants. Pro

Style APA, Harvard, Vancouver, ISO itp.

Siripatrawan, Ubonratana. Active Chitosan-Based Film with Antimicrobial Property for Food Packaging Application. Chulalongkorn University, 2010. https://doi.org/10.58837/chula.res.2010.22.

Pełny tekst źródła

Streszczenie:

This research was aimed to develop an active film from chitosan film incorporated with green tea extract to enhance antioxidant and antimicrobial properties in order to be used for food shelf life extension. The experiments were divided into 3 parts. Firstly, chitosan-based film preparation and modification were determined. The results suggested that the optimum chitosan films could be prepared from 2% chitosan in 1% acetic acid. However, the chitosan film was brittle and had low flexibility. Mechanical property of chitosan film was modified by adding different concentrations of glycerol, as a

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!