Zaloguj się

Gotowe bibliografie tematyczne / Web Offset / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Web Offset.

Artykuły w czasopismach na temat „Web Offset”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Web Offset”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Pushkar, O. I., and A. S. Hordeyev. "Modeling of web offset printing processes." Printing and Publishing 2, no. 86 (2023): 102–15. http://dx.doi.org/10.32403/0554-4866-2023-2-86-102-115.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Zhang, Rui, Bo Tao, and Jian Zhou Quan. "Lateral Displacement Control Using Iterative Learning for Intermittent Web Transportation." Advanced Materials Research 468-471 (February 2012): 1840–45. http://dx.doi.org/10.4028/www.scientific.net/amr.468-471.1840.

Pełny tekst źródła

Streszczenie:

A lateral displacement control method of a moving web using an offset-pivot guide system for intermittent web transportation is presented in this paper. The dynamics model of the offset-pivot guide system is investigated, and the factors resulting in the lateral displacement of the web are researched and analyzed. In the case of intermittent web transportation, iterative learning control (ILC) is adopted to eliminate the periodic disturbance. Simulations show that the iterative learning control method adopted is very effective to resist the lateral displacement of the web by using the offset-p

Style APA, Harvard, Vancouver, ISO itp.

3

Roziqin, M. Ainun, and Uce Indahyanti. "Web-Based Offset Printing System Development Using ADDIE Method." JICTE (Journal of Information and Computer Technology Education) 8, no. 1 (2024): 16–23. https://doi.org/10.21070/jicte.v8i1.1658.

Pełny tekst źródła

Streszczenie:

The development of information technology has impacted various aspects of life, including offset printing. This research aims to develop a web-based offset printing information system using the ADDIE method. This system is designed to improve efficiency and accuracy in the ordering and reporting processes at Hj. Supaat Printing. The ADDIE method, which includes the stages of Analysis, Design, Development, Implementation, and Evaluation, is used to ensure a structured and effective system development. Laravel is employed as the framework for developing this system. The research results show tha

Style APA, Harvard, Vancouver, ISO itp.

4

Nakano, Takashi. "Development of the new generation web offset press." JAPAN TAPPI JOURNAL 40, no. 7 (1986): 624–27. http://dx.doi.org/10.2524/jtappij.40.624.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Chai, Cheng Wen, Ji Fei Cai, and Shu Qin Wu. "Research on Pneumatic Controlling Mechanism of Flying Splicer of Web-Fed Offset Presses." Advanced Materials Research 201-203 (February 2011): 2281–85. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.2281.

Pełny tekst źródła

Streszczenie:

Flying splicer is a key component of web-fed offset presses for automatically replacing the exhausting web roll with a new one without stopping the machine. The composition and working principle of pneumatic controlling mechanism for driving the flying splicer was analyzed according to the processing requirements of automatic web alternation. By using the software FluidSim, the pneumatic sequential operation controlling circuitry with multi-cylinders for driving the flying splicer was designed, in which the air cylinders cooperates to accelerate the new reel to the circumferential velocity of

Style APA, Harvard, Vancouver, ISO itp.

6

Zhu, Yong Shuang, Xiang Yang Xu, and Li Jie Wang. "The Characterization of Web Offset Equipment Based on the Measurement of Chromaticity." Advanced Materials Research 718-720 (July 2013): 923–27. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.923.

Pełny tekst źródła

Streszczenie:

t would be a large effort to use traditional methods of calibration procedures for Web Offset Press equipments. In this paper we proposed a convenient process calibration, which will not only guarantee the product quality meeting the ISO standards, but also save financial and material resources. Firstly, the measurements for determining the best ink thickness in Web Offset Press are discussed. The chromaticity values on solid fields with corresponding combination of paper and ink required by ISO Standards were achieved. Through a optimization process for gray balance, the printed tone values w

Style APA, Harvard, Vancouver, ISO itp.

7

Rodrigues, Antonio M., and Ward T. Newcomb. "Application of electron beam curing in web-offset printing." Radiation Physics and Chemistry (1977) 25, no. 4-6 (1985): 617–24. http://dx.doi.org/10.1016/0146-5724(85)90141-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Lif, J. O. "Hygro-viscoelastic stress analysis in paper web offset printing." Finite Elements in Analysis and Design 42, no. 5 (2006): 341–66. http://dx.doi.org/10.1016/j.finel.2005.08.002.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Chen, Yi Jun, Er Gang Kou, and Qing Hai Zhao. "Research on Web Press Printing without Ink Detector." Advanced Materials Research 411 (November 2011): 630–33. http://dx.doi.org/10.4028/www.scientific.net/amr.411.630.

Pełny tekst źródła

Streszczenie:

Printing press manufacturers need to detect assembled machine whether the printing is qualified. This wastes a lot of paper, ink and human, and is not conducive to business efficiency. In this paper, through analysis of web press, the instrument is developed that takes the paper to detect the offset with non-printing ink on the printing press, through high-precision optical sensors, it can get the offset of conveyor belt material in the course of the amount of deviation. The amount of assembly precision machine is detected based on deviation; Then design a circuit tester hardware and software;

Style APA, Harvard, Vancouver, ISO itp.

10

Gurgal, Natalia, Vyacheslav Repeta, Vsevolod Senkivsky, and Volodymyr Shybanov. "Definition of Quality Criteria of the Technological Process of Narrow Web UV-Printing." Journal of Graphic Engineering and Design 4, no. 2 (2013): 7–11. http://dx.doi.org/10.24867/jged-2013-2-007.

Pełny tekst źródła

Streszczenie:

The application of Narrow Web UV-flexographic printing has several advantages compared with offset printing. In particular, they are the lack of the operation of water-ink balance setting in the technological process, the ability to print on a wide range of materials and so on. Though the imprint quality is clearly based on standards in offset printing, there are no clearly indicated requirements for Narrow Web UV flexographic printing. The absence of such requirements on quality parameters of the technological process of Narrow Web UV-Printing predetermined conducting its analysis with the he

Style APA, Harvard, Vancouver, ISO itp.

11

Zhang, Erhu, Yajun Chen, Min Gao, Jinghong Duan, and Cuining Jing. "Automatic Defect Detection for Web Offset Printing Based on Machine Vision." Applied Sciences 9, no. 17 (2019): 3598. http://dx.doi.org/10.3390/app9173598.

Pełny tekst źródła

Streszczenie:

In the printing industry, defect detection is of crucial importance for ensuring the quality of printed matter. However, rarely has research been conducted for web offset printing. In this paper, we propose an automatic defect detection method for web offset printing, which consists of determining first row of captured images, image registration and defect detection. Determining the first row of captured images is a particular problem of web offset printing, which has not been studied before. To solve this problem, a fast computational algorithm based on image projection is given, which can co

Style APA, Harvard, Vancouver, ISO itp.

12

Yuan, Ying Cai, Yan Li, and Yi Ming Wang. "Study on the Accuracy of Web Offset Press’s Fold Mechanism." Advanced Materials Research 338 (September 2011): 450–55. http://dx.doi.org/10.4028/www.scientific.net/amr.338.450.

Pełny tekst źródła

Streszczenie:

The cutter’s lateral displacement along the paper’s movement is the main reason which causes the folding accuracy problem. The folding stem is deformed in actual working condition, which causes the cutter emerge lateral displacement. The structure of folding stem is complex, it needs the combination of mechanics and finite element analysis to get the fitting formula relation of the folder’s deformation and the loadings. By the dynamic coefficients, which express the relation of loadings between the working velocity and clearances, the cutter’s lateral displacement model is established based on

Style APA, Harvard, Vancouver, ISO itp.

13

Englund, Cristofer, and Antanas Verikas. "Ink feed control in a web-fed offset printing press." International Journal of Advanced Manufacturing Technology 39, no. 9-10 (2007): 919–30. http://dx.doi.org/10.1007/s00170-007-1273-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Najmuddin, Faiz. "Sistem Informasi Online Pemesanan Dan Penyedia Informasi Jasa Percetekan Bersasis Web." INTECH 4, no. 1 (2023): 13–17. http://dx.doi.org/10.54895/intech.v4i1.1964.

Pełny tekst źródła

Streszczenie:

    The printing industry has both positive and negative impacts on customers. One of the negative impacts is the inconsistent quality of printed products. To address this issue, the team developed the Web Nugraha Offset application, designed using Canva, Visual Studio Code, Notepad++, Figma, MySQL, HTML, CSS, PHP, JavaScript, and Bootstrap. This web-based application aims to help customers access information about the printing industry and its services before physically visiting the printing industry. This application's primary feature isprovidinge information on print

Style APA, Harvard, Vancouver, ISO itp.

15

Rossoleh, Andriyan Herqi, and Arief Wisaksono. "Goss Community Offset Machine Wiring Panel Image (Paper)." Procedia of Engineering and Life Science 7 (March 13, 2024): 321–34. http://dx.doi.org/10.21070/pels.v7i0.1476.

Pełny tekst źródła

Streszczenie:

Abstract. Review control activities, especially reducing the quality of printouts on Goss Community offset machines, are one of the quality control parameters carried out by each company. The Goss Community offset machine panel itself is usually equipped with various buttons, settings and monitors that allow the operator to control various print parameters, such as print speed, starting and stopping the machine, and so on. In this article we discuss the understanding of the components of the Goss Community offset machine panel and drawing the wiring panel of the Goss Community offset machine i

Style APA, Harvard, Vancouver, ISO itp.

16

Li, Junyao, Ming-Yang Zhuang, Yue Shen, Marta Volonteri, Nianyi Chen, and Tiziana Di Matteo. "Active Galactic Nuclei and Host Galaxies in COSMOS-Web. II. First Look At the Kiloparsec-scale Dual and Offset AGN Population." Astrophysical Journal 986, no. 1 (2025): 101. https://doi.org/10.3847/1538-4357/adbae2.

Pełny tekst źródła

Streszczenie:

Abstract Kiloparsec-scale dual and offset active galactic nuclei (AGNs) are signposts of accreting supermassive black holes (SMBHs) triggered during late-stage galaxy mergers, offering crucial insights into the coevolution of SMBHs and galaxies. However, robustly confirmed systems at high redshift (e.g., z > 1) are scarce and biased toward the most luminous and unobscured systems. In this study, we systematically search for kiloparsec-scale (projected separation <15 kpc) dual and offset AGNs around 571 moderate-luminosity, X-ray-selected AGNs, including the obscured population, utilizing

Style APA, Harvard, Vancouver, ISO itp.

17

Hirabayashi, Tetsuya, Seiji Fujiwara, and Terunobu Fukui. "Factors of the Fluting of Coated Paper in Web-Offset Printing." JAPAN TAPPI JOURNAL 54, no. 5 (2000): 693–99. http://dx.doi.org/10.2524/jtappij.54.693.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Hirabayashi, Tetsuya, Yukiko Suzuki, Yukio Tani, and Daisuke Watanabe. "Mechanism of the Fluting of Coated Paper in Web-Offset Printing." JAPAN TAPPI JOURNAL 57, no. 1 (2003): 92–97. http://dx.doi.org/10.2524/jtappij.57.92.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Zhou, Bo, Xin Wang, Changwei Zheng, Jinxiang Cao, and Pingguo Zou. "Finite Element Analysis for the Web Offset of Wind Turbine Blade." IOP Conference Series: Earth and Environmental Science 63 (May 2017): 012011. http://dx.doi.org/10.1088/1755-1315/63/1/012011.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Shankar, N. G., N. Ravi, and Z. W. Zhong. "A real-time print-defect detection system for web offset printing." Measurement 42, no. 5 (2009): 645–52. http://dx.doi.org/10.1016/j.measurement.2008.10.012.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Šalvienė, Eglė, Nikolaj Šešok, and Igor Iljin. "DAMPING TRANSVERSAL VIBRATIONS OF THE OFFSET CYLINDER OF THE OFFSET PRESS / RULONINĖS OFSETINĖS MAŠINOS OFSETINIO CILINDRO SKERSINIŲ VIRPESIŲ SLOPINIMAS." Mokslas - Lietuvos ateitis 3, no. 6 (2012): 8–11. http://dx.doi.org/10.3846/mla.2011.101.

Pełny tekst źródła

Streszczenie:

Investigation into the influence of a dynamic vibration damper on the intensity of the absolute forced transversal vibrations of the blanket cylinder of the web printing offset press was performed. The analytical and numerical examination of the dynamic model of the cylinder was done. The obtained results have disclosed that the application of the damper decreases the intensity of printing cylinder vibrations. Santrauka Analiziniu ir skaitmeniniu būdu ištirtas dinaminio virpesių slopintuvo efektyvumas slopinant priverstinius periodinius ofsetinio spausdinimo įrenginio ofsetinio cilindro skersi

Style APA, Harvard, Vancouver, ISO itp.

22

Srividya, B., and V. Thirunavukkarasu. "Investigation the Print Quality of Web Offset Colour Prints on Newsprint Paper." Asian Journal of Research in Social Sciences and Humanities 6, no. 11 (2016): 803. http://dx.doi.org/10.5958/2249-7315.2016.01230.2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

B, Srividya, and Thirunavukkarasu V. "Print quality assessment for web offset colour printing machine in Newspaper production." International Journal of Engineering Trends and Technology 34, no. 7 (2016): 322–26. http://dx.doi.org/10.14445/22315381/ijett-v34p264.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Studer, Rudi, York Sure, and Raphael Volz. "Managing User Focused Access to Distributed Knowledge." JUCS - Journal of Universal Computer Science 8, no. (6) (2002): 662–72. https://doi.org/10.3217/jucs-008-06-0662.

Pełny tekst źródła

Streszczenie:

Community web sites exhibit the property that multiple content providers exist. Of course, any portal is only as useful as the quality and amount of its content. Developing original content is time consuming and expensive. To offset the cost, we present a novel framework, viz. SEAL (SEmantic portAL), that builds on Semantic Web standards. We illustrate our approach with examples from the OntoWeb community portal. Community web sites exhibit two dominating properties: They often need to integrate many different information sources and they require an adequate web site management system. SEAL ex

Style APA, Harvard, Vancouver, ISO itp.

25

Uzzaman, Asraf, James B. P. Lim, David Nash, Jim Rhodes, and Ben Young. "Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading." Thin-Walled Structures 50, no. 1 (2012): 76–86. http://dx.doi.org/10.1016/j.tws.2011.09.009.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Yang, Jun Bao, and Ke Qiang Qiu. "Web Reinforced AZ91 Composites with Enhanced Strength and Plasticity." Advanced Materials Research 299-300 (July 2011): 314–18. http://dx.doi.org/10.4028/www.scientific.net/amr.299-300.314.

Pełny tekst źródła

Streszczenie:

Stainless steel web reinforced AZ91 alloy were fabricated by melt infiltration casting method. The mechanical properties of the resultant composites were much improved in regarding to the elastic modulus, 0.2% offset yield strength, ultimate compressive strength and the strains compared to the unreinforced counterpart. The interaction between the web and the dislocations in the matrix and the load transfer from the matrix to the reinforcement are the strengthening factors. While the wire being broken, bended and pulled out of the matrix, especially the activation of much more slip bands in the

Style APA, Harvard, Vancouver, ISO itp.

27

Arohit, Goyat*1 Nishan Singh2 &. AbhishekChahar3. "AN OBSERVATORY ANALYSIS OF FOUNTAIN SOLUTION USED IN WEB FED OFFSET & SHEET FED OFFSET PRESSES WITH REGARD TO PH AND CONDUCTIVITY FACTORS." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 5, no. 11 (2018): 103–9. https://doi.org/10.5281/zenodo.1491313.

Pełny tekst źródła

Streszczenie:

In this paper, we have analyzed Fountain Solution Used in Web Fed Offset & Sheet Fed Offset Presses with regard to pH and Conductivity factors. Printing is a Servicing Industry. It is an art, craft, science, & technology of reproduction of ‘n’ number of replicas with the help of a suitable Printing Process on the desired substrate and surface. It has an impact on everyone’s life. Printing is the second largest industry of India. We are basically providing services to the society; being overlapped by various branches of Education like Computers, Electronics, Manufactur

Style APA, Harvard, Vancouver, ISO itp.

28

Arohit, Goyat*1 Nishan Singh2 &. AbhishekChahar3. "AN OBSERVATORY ANALYSIS OF FOUNTAIN SOLUTION USED IN WEB FED OFFSET & SHEET FED OFFSET PRESSES WITH REGARD TO PH AND CONDUCTIVITY FACTORS." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 5, no. 11 (2018): 103–9. https://doi.org/10.5281/zenodo.1491329.

Pełny tekst źródła

Streszczenie:

In this paper, we have analyzed Fountain Solution Used in Web Fed Offset & Sheet Fed Offset Presses with regard to pH and Conductivity factors. Printing is a Servicing Industry. It is an art, craft, science, & technology of reproduction of ‘n’ number of replicas with the help of a suitable Printing Process on the desired substrate and surface. It has an impact on everyone’s life. Printing is the second largest industry of India. We are basically providing services to the society; being overlapped by various branches of Education like Computers, Electronics, Manufactur

Style APA, Harvard, Vancouver, ISO itp.

29

Marunić, Gordana, Goran Gregov, and Vladimir Glažar. "Comparison between 3D FEM and Standard ISO Tooth Root Stresses." Key Engineering Materials 488-489 (September 2011): 85–88. http://dx.doi.org/10.4028/www.scientific.net/kem.488-489.85.

Pełny tekst źródła

Streszczenie:

The paper deals with the discussion how nominal spur tooth root stress of thin-rimmed gear determined in accordance with the standard ISO 6336-3:2006, method B, agrees with the results of the 3D FEM stress analysis. The procedure proposed by standard ISO for the tooth root stress calculation doesn’t identify the stress behaviour related to mutual affects of characteristic thin-rimmed gear geometrical parameters. Therefore, the 3D FEM analysis of tooth root stress has been performed for gear structures with middle and offset web with various rim and web thickness. The rim thickness has covered

Style APA, Harvard, Vancouver, ISO itp.

30

Arif, Fahmi, Fadillah Ramadhan, and Wildan Sayf. "Data Mining for Quality Prediction in Software-as-A-Service Concept: A Case Study in Offset Printing Company." Quality Innovation Prosperity 27, no. 3 (2023): 109–25. http://dx.doi.org/10.12776/qip.v27i3.1933.

Pełny tekst źródła

Streszczenie:

Purpose: This research aims to design a model of quality prediction system using data mining methods in the software-as-a-service (Saas) environment in order to facilitate manufacturers to be able to analyse process and product quality without software investment. Methodology/Approach: To develop the quality prediction model, this study utilized a data mining methodology to extract knowledge from historical data collected from the offset printing industry, focusing on manufacturing parameters. Four classification algorithms (Decision Tree, k-NN, Naive Bayes, Random Tree) were employed an

Style APA, Harvard, Vancouver, ISO itp.

31

Uzzaman, Asraf, James B. P. Lim, David Nash, Jim Rhodes, and Ben Young. "Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition." Thin-Walled Structures 65 (April 2013): 34–48. http://dx.doi.org/10.1016/j.tws.2012.12.003.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Zhu, Yong Shuang, Li Jie Wang, and Tian Chen. "Testing and Data Analysis of Heat-Set Web Offset Materials Based on the ISO Standard." Advanced Materials Research 718-720 (July 2013): 928–33. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.928.

Pełny tekst źródła

Streszczenie:

In this paper, common heat-set web offset printing materials, paper and ink were tested based on ISO standards. We analyzed the datum of paper and ink to see the degree of compliance with the ISO standards,thus obtained the characteristics of the commonly used paper and ink in China in terms of their response to the color.The purpose of the analysis is to provide a reference for the implementation and controlling of enterprise printing standardization process.

Style APA, Harvard, Vancouver, ISO itp.

33

SALO, MIKKO, ANNA-LEENA ERKKILÄ, MATTI VILKKO, and MIKKO KANERVA. "Paper bending stiffness and web tension measurement from a running web using a vacuum and computer imaging." May 2023 22, no. 5 (2023): 344–56. http://dx.doi.org/10.32964/tj22.5.344.

Pełny tekst źródła

Streszczenie:

A novel method for measuring the bending stiffness of paper online during manufacturing is intro-duced. The method uses photometric stereo imaging to detect the shape of the deflection surface caused by a controllable pressure difference over the paper’s surfaces. The hardware for the measurement is based on a combination of two existing sensors, which has accelerated and facilitated the development of the implementation. The deflection and loads are tied together by the governing differential equation for the bending of an orthotropic elastic plate with selected simplifications. An approach t

Style APA, Harvard, Vancouver, ISO itp.

34

Chai, Chengwen. "Research on PLC-Based Pneumatic Controlling System of Flying Splicer of Web-Fed Offset Presses." Open Mechanical Engineering Journal 5, no. 1 (2011): 160–65. http://dx.doi.org/10.2174/1874155x01105010160.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Augustaitis, Vytautas Kazimieras, V. Gičan, I. Iljin, N. Šešok, and Vilius Geleževičius. "Model of a Multi-Sectional Web Offset Printing Press Drive Section, Controlled by Electronic Shaft." Solid State Phenomena 113 (June 2006): 103–8. http://dx.doi.org/10.4028/www.scientific.net/ssp.113.103.

Pełny tekst źródła

Streszczenie:

For synchronization of sections of modern printing machines and equipment of such sections, driven by individual drives the system of “electronic shaft” is widely used. A development of the mathematical model of such a local drive, consisting of mechanical and electric-electronic parts as well as links between them, is provided. The model with an effective adaptive control block for increasing accuracy of the drive is provided in the form of a structural scheme. It, first of all, is usable for investigations of linear and nonlinear dynamic processes that take place in the mechanical part of th

Style APA, Harvard, Vancouver, ISO itp.

36

Ms., Sunayna Saneja*1 Mr. Satish2 &. Mr. Sandeep Boora3. "PRINT QUALITY COMPARISON OF SOLID BLEACHED SULPHATE (SBS) BOARDAND DUPLEX BOARDPRINTED WITH WEB OFFSET PRESS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 397–400. https://doi.org/10.5281/zenodo.814528.

Pełny tekst źródła

Streszczenie:

Solid Bleached Sulphate Boards (SBS) and Duplex Boards are commonly used substrates for various carton based packaging applications. Both types of boards were printed with Web Offset Printing Press available in local market keeping in target to check printing characteristics i.e. Solid Ink Density, Dot Gain and Print Contrast. A master consisting of quality control patches was prepared, printed and evaluated for above mentioned print characteristics with the help of spectrodensitometer. The results indicated that Solid Bleached Sulphate Boards are better than Duplex boards in terms of Solid In

Style APA, Harvard, Vancouver, ISO itp.

37

Nastiti, Faulinda Ely, Triana Triana, and Rina Arum Prastyanti. "WEB ENGINEERING DENGAN MODEL CUSTOMER RELATIONSHIP MANAGEMENT." Biner : Jurnal Ilmiah Informatika dan Komputer 1, no. 1 (2022): 1–9. http://dx.doi.org/10.32699/biner.v1i1.2369.

Pełny tekst źródła

Streszczenie:

Percetakan yakni sebuah perusahaan yang bergrak di bidang jasa atau barang biasanya berwujud barang atau gambar, menggunakan tinta di atas kertas yang diproduksi secara massal menggunakan mesin cetak. Banyak yang diproduksi dari percetakan menggunakan teknik percetakan offset mulai dari membuat buku, koran, brosur, dan sebagainya dengan berbagai tema. Tentunya calon pembeli harus bisa memilih desain sesuai untuk kebutuhan dalam hal ini harus melibatkan keputusan karena ada beberapa hal yang perlu dipertimbangkan sehingga pelanggan yang merasa kebingungan dalam menentukan berbagai tema manakah

Style APA, Harvard, Vancouver, ISO itp.

38

Wang, Chun Gang, Zi Feng Xu, Zhuang Nan Zhang, and Yu Fei Cao. "Load-Carrying Capacity of Cold-Formed Steel Columns with Complicated Section under Eccentric Compression Loading." Advanced Materials Research 838-841 (November 2013): 601–4. http://dx.doi.org/10.4028/www.scientific.net/amr.838-841.601.

Pełny tekst źródła

Streszczenie:

This paper studied 30 cold-formed steel columns with three different sections and eleven different eccentricities under eccentric compression loading by nonlinear finite element analysis using program ANSYS. Effects of the above parameters on ultimate load-carrying capacity, buckling modes, the distribution of stress and strain, and deflection behavior of channels with complex edge stiffeners under eccentric compression loading were investigated. The result shows that influence of the effective centroid offset on carrying capacity under eccentric compression loading can not be ignored. The max

Style APA, Harvard, Vancouver, ISO itp.

39

Tåg, Carl-Mikael, Maunu Toiviainen, Mikko Juuti, and Patrick Gane. "Online detection of moisture in heatset printing: Liquid transfer to printed image and non-image areas." Nordic Pulp & Paper Research Journal 27, no. 1 (2012): 112–21. http://dx.doi.org/10.3183/npprj-2012-27-01-p112-121.

Pełny tekst źródła

Streszczenie:

Abstract In the present study, near-infrared sensors are used to investigate moisture variations on paper in the heatset web offset printing process. The moisture content was determined from both non-image and image printed areas at multiple locations along the printing line. The amount of water based liquid (fountain solution) transferred to the two studied areas as well as the internal moisture content of the paper was investigated in terms of near-infrared absorbance response. In order to achieve absolute moisture content estimates, the sensors were calibrated for the respective measurement

Style APA, Harvard, Vancouver, ISO itp.

40

Felderer, Barbara, Antje Kirchner, and Frauke Kreuter. "The Effect of Survey Mode on Data Quality: Disentangling Nonresponse and Measurement Error Bias." Journal of Official Statistics 35, no. 1 (2019): 93–115. http://dx.doi.org/10.2478/jos-2019-0005.

Pełny tekst źródła

Streszczenie:

Abstract More and more surveys are conducted online. While web surveys are generally cheaper and tend to have lower measurement error in comparison to other survey modes, especially for sensitive questions, potential advantages might be offset by larger nonresponse bias. This article compares the data quality in a web survey administration to another common mode of survey administration, the telephone. The unique feature of this study is the availability of administrative records for all sampled individuals in combination with a random assignment of survey mode. This specific design allows us

Style APA, Harvard, Vancouver, ISO itp.

41

Kim, Chung Hwan, Ha-Il You, and Seung-Hyun Lee. "Register control of roll-to-roll gravure-offset printing equipment considering time difference between measurement and actuation." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226, no. 11 (2012): 2726–38. http://dx.doi.org/10.1177/0954406211433247.

Pełny tekst źródła

Streszczenie:

The manufacture of printed electronics by roll-to-roll printing machine requires more accurate register performance than conventional media printing technology. Moreover, high drying temperature and long drying time to sinter the inks can induce the substantial changes in the length of the substrate and consequently register errors. Among the roll-to-roll printing methods, the gravure one, despite its relatively fast productivity and fine-line printing capacity, has difficulty in achieving the required register specifications for printed electronics because of the dependence of the register co

Style APA, Harvard, Vancouver, ISO itp.

42

PARENT, FRÉDÉRIC, JEAN HAMEL, and DAVID MCDONALD. "Web lateral instability caused by nonuniform paper properties." January 2022 21, no. 1 (2022): 9–20. http://dx.doi.org/10.32964/tj21.9.22.

Pełny tekst źródła

Streszczenie:

Lateral or cross-machine direction (CD) web movement in printing or converting can cause problems such as misregistration, wrinkles, breaks, and folder issues. The role of paper properties in this problem was studied by measuring lateral web positions on commercial printing presses and on a pilot-scale roll testing facility (RTF). The findings clearly showed that CD profiles of machine direction (MD) tension were a key factor in web stability. Uneven tension profiles cause the web to move towards the low-tension side. Although extremely nonuniform tension profiles are visible as bagginess, mor

Style APA, Harvard, Vancouver, ISO itp.

43

Rosyidi, Rifana, and Endang Pudji Widjajati. "USULAN PERAWATAN PREVENTIF MESIN WEB ROTARY OFFSET PRINTING DENGAN MENGGUNAKAN METODE MODULARITY DESIGN DI PT. XYZ." JUMINTEN 1, no. 6 (2020): 133–44. http://dx.doi.org/10.33005/juminten.v1i6.154.

Pełny tekst źródła

Streszczenie:

PT.XYZ adalah perusahaan yang bergerak dalam bidang jasa layanan percetakan, yang menghasilkan produk utamanya koran dan produk komersial seperti tabloid, majalah, buku, Al-Quran dan produk media cetak lainnya. PT. XYZ menggunakan sistem produksi continous process, dalam sistem produksi ini, perusahaan menuntut agar semua mesin berada dalam kondisi yang baik, sehingga proses produksi tidak mengalami keterlambat ataupun kerugian. Dari pengecekan terhadap semua mesin yang ada didalam perusahaan setiap harinya, didapatkan mesin yang banyak mengalami kerusakan dan data downtime terbesar adalah web

Style APA, Harvard, Vancouver, ISO itp.

44

Hogg, Tad, and Kristina Lerman. "Leveraging the Contributions of the Casual Majority to Identify Appealing Web Content." Proceedings of the AAAI Conference on Human Computation and Crowdsourcing 4 (September 21, 2016): 69–78. http://dx.doi.org/10.1609/hcomp.v4i1.13277.

Pełny tekst źródła

Streszczenie:

Users of peer production web sites differ greatly in their activity levels.A small minority are engaged contributors, while the vast majority are only casual surfers. The casual users devote little effort to evaluating the site's content and many of them visit the site only once. This churn poses a challenge for sites attempting to gauge user interest in their content. The challenge is especially severe for sites focusing on content with subjective quality, including movies, music, restaurants and items in other cultural markets. A key question is whether content evaluation should use opinions

Style APA, Harvard, Vancouver, ISO itp.

45

Mikalainis, Povilas, Jonas Sidaravičius, and Vytautas Turla. "THE INFLUENCE OF FORMULATING A DAMPING SOLUTION ON DOT GAIN." Mokslas - Lietuvos ateitis 2, no. 4 (2010): 18–23. http://dx.doi.org/10.3846/mla.2010.061.

Pełny tekst źródła

Streszczenie:

Difference in dot gain using various additives to the damping solution was investigated on two offset web presses. Dot gain was measured using a densitometer and calculated considering CIE L*a*b* coordinates. It was found that while using a non alcohol additive instead of the alcohol one, dot gain became smaller and printing stability was lower. Changes in dot gain depend on the ink that may vary in colours. The influence of changes in dot gain on the colour was determined. Besides, it was found that differences in colour were unacceptable in many cases.

Style APA, Harvard, Vancouver, ISO itp.

46

Haffinger, P., P. Doulgeris, and A. Gisolf. "Wave-equation-based AVO inversion: A 1.5D elastic full-waveform inversion technique for improved reservoir characterization." Leading Edge 44, no. 5 (2025): 415a1–415a9. https://doi.org/10.1190/tle44050415a1.1.

Pełny tekst źródła

Streszczenie:

Accurate subsurface characterization is vital for hydrocarbon exploration and the energy transition. Full-waveform inversion (FWI) potentially provides a complete data model by fully simulating elastic wave propagation in 3D, but it is computationally demanding. Linear amplitude variation with offset (AVO) inversion is computationally efficient by deploying a 1.5D data model but is limited by simplifying assumptions like primary reflections only. This study introduces elastic wave-equation-based AVO (WEB-AVO), which combines the efficiency of AVO inversion with the physical accuracy of FWI. Ad

Style APA, Harvard, Vancouver, ISO itp.

47

Setiawan, R. Rhoedy, Andy Prasetyo Utomo, Pratomo Setiaji, and Ervan Pangestu. "Pengelolaan Efisien Bahan Baku dengan Sistem Informasi Manajemen Persediaan Berbasis Web pada CV. Cahaya Printing." JPSITECH: Jurnal Pengabdian kepada Masyarakat Sistem Informasi dan Teknologi 1, no. 1 (2024): 43–51. https://doi.org/10.24176/jpsitech.v1i1.13130.

Pełny tekst źródła

Streszczenie:

CV. Cahaya Printing is a company operating in the printing and offset sector, founded by Dafaza Indika in mid-2020. Even though managing raw materials using Microsoft Excel is quite good, the company still faces difficulties in preparing raw material usage reports. The administration had to create daily reports and check data compliance manually, which resulted in inefficiencies. Therefore, a web-based raw material inventory management information system is needed to assist inventory management. This research uses observation methods, interviews with warehouse administration, as well as theori

Style APA, Harvard, Vancouver, ISO itp.

48

Sun, Yu Qiu, Ji Bin Zhao, Jian Xin Sun, and Ji Fei Cai. "Simulation of Closed-Loop Paper Tension Control System." Applied Mechanics and Materials 329 (June 2013): 434–37. http://dx.doi.org/10.4028/www.scientific.net/amm.329.434.

Pełny tekst źródła

Streszczenie:

Paper tension is the most important control parameter in roll material production that directly impacts the printing quality of the web offset. Based on the closed-loop paper tension control theory, by conducting a research into the simulation of paper tension control system with MATLAB/SIMULINK, presented the closed-loop control diagram about the paper tension control system. Under different control parameter, the value of the overshoot, respond speed and residual of the system varies. As a result, the quantitative research on the simulation of the system offers a valid means in improving the

Style APA, Harvard, Vancouver, ISO itp.

49

Yuan, Ying Cai, Yan Li, and Yi Ming Wang. "Robust Design to Control the Chaos of Fold Mechanism with Clearance." Applied Mechanics and Materials 312 (February 2013): 153–57. http://dx.doi.org/10.4028/www.scientific.net/amm.312.153.

Pełny tekst źródła

Streszczenie:

With the increasing of web offset printing machines working speed, the nonlinear dynamics responses are more significant, even the fold mechanism with clearances appears some chaos phenomenon. Based on the dynamic model of fold mechanism, the nonlinear dynamics responses and the chaos movement in pair are studied. Used the performance parameters and dynamics response sensitivities as the goal values, the robust design model is established. By the robust design model, the nonlinear dynamic responses and chaos phenomenon can be under controlled in the same clearance degree. In this way, the perf

Style APA, Harvard, Vancouver, ISO itp.

50

Yousefi, Amir M., and Bijan Samali. "Design of cold-formed ferritic stainless steel unlipped channels with offset web openings and unfastened flanges subject to web bearing failure under one-flange load scenarios." Structures 27 (October 2020): 194–211. http://dx.doi.org/10.1016/j.istruc.2020.05.048.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!