Gotowe bibliografie tematyczne / Xrd analysis of stainless steel / Rozprawy doktorskie
Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Xrd analysis of stainless steel.

Rozprawy doktorskie na temat „Xrd analysis of stainless steel”

Autor: Grafiati
Data publikacji: 3 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Xrd analysis of stainless steel”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Lundberg, Daniel, Filip Wilson, Hjalmar Gunnarsson, Leo Sjörén, Robin Xu, and Erik Djurberg. "Long term aging and creep exposure for advanced heat resistant alloys : A phase analysis." Thesis, Uppsala universitet, Institutionen för materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-446407.

Pełny tekst źródła
Streszczenie:
This project was ordered by Sandvik Materials Technology and was performed by a group of students at Uppsala university. The purpose of the project was to study precipitation behavior and structure stability in six advanced heat resistant alloys. Each sample were subjected to a creep rupture test in 600 or 700°C depending on the alloy type. Two parts of each alloy where examined; one part which had been affected by creep and another part which was unaffected by creep. A literature study was performed first to gain knowledge of the scientific theory utilized in this project, namely creep, preci
Style APA, Harvard, Vancouver, ISO itp.
2

Gentil, Johannes Axel. "Surface Modification of Superaustenitic and Maraging Stainless Steels by Low-Temperature Gas-Phase Carburization." Case Western Reserve University School of Graduate Studies / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=case1228456491.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Salih, Elwaleed Lutfi Mohamed. "Analysis and design of stainless steel bolted connections." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5749.

Pełny tekst źródła
Streszczenie:
The use of stainless steel in construction is steadily growing, with applications designed to exploit its structural properties, durability, appearance and fire resistance. The mechanical behaviour of stainless steel is fundamentally different from that of carbon steel. The stress-strain curve of stainless steel is rounded without a well-defined yield stress and exhibits significant strain hardening at relatively small strains. Nevertheless, design provisions for bolted connections between stainless steel structural members in current international standards are essentially based on the rules
Style APA, Harvard, Vancouver, ISO itp.
4

jahanzeb, Nabeel. "Erosion during Brazing in Stainless Steel grade 304." Thesis, KTH, Materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-116688.

Pełny tekst źródła
Streszczenie:
The erosion or dissolution of stainless steel grade 304 as base metal by molten brazing fillermetal was investigated using one nickel and two iron based filler metals. The difference betweentwo iron filler metal is 5 % Manganese content in one of the filler metal. The Wettability of fillermetal is effected by oxidation of base or filler metal for which high vacuum or non reacting gasis used as a furnace atmosphere to reduce the partial pressure of oxygen. The furnace parameterseffecting erosion of base metal was observed e.g. peak temperature and brazing time. The effectof filler mass was also
Style APA, Harvard, Vancouver, ISO itp.
5

Maruma, Mpho Given. "Effect of composition and thermomechanical processing on the texture evolution, formability and ridging behavior of type AISI 441 ferritic stainless steel." Diss., University of Pretoria, 2013. http://hdl.handle.net/2263/40839.

Pełny tekst źródła
Streszczenie:
Global warming and air pollution are the major problems facing the world today. Therefore strict environmental legislation on the emission of harmful gases from motor vehicles has forced the automobile industry to search for alternative materials or new materials for exhaust systems. In order to produce cleaner exhaust gases, the exhaust temperature needs to be increased to approximately 900oC. Therefore, exhaust manifolds are exposed repeatedly to hot gases as they are nearest to the engine requiring good oxidation resistance, thermal fatigue properties, cold workability and weldability. One
Style APA, Harvard, Vancouver, ISO itp.
6

Silva, Eloy de Macedo. "Fractal analysis of fracture surface of Duplex Stainless steel UNS S31803." Universidade Federal do CearÃ, 2002. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=7306.

Pełny tekst źródła
Streszczenie:
CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior<br>In the last years, the fractal geometry has become widely studied. Its application in several areas increased substantially, particularly in materials engineering and science, aiming the analysis of failures and the study of the mechanical properties of materials. Some studies have shown the relationship between the fracture surfaces and their mechanical properties using the fractal geometry and its properties of fractal dimension and selfsimilarity. In this research, the fracture surface of duplex stainless steel, which was obtain
Style APA, Harvard, Vancouver, ISO itp.
7

Nöbauer, Henrik. "Residual stresses and distortions in austenitic stainless steel 316L specimens manufactured by Selective Laser Melting." Thesis, Högskolan Väst, Avdelningen för svetsteknologi (SV), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-12771.

Pełny tekst źródła
Streszczenie:
Residual stresses are one of the major challenges in additive manufacturing of metallic materials today. They are induced during manufacturing because of the rapid local heating and cooling and may cause distortions, cracking and delamination between layers. The magnitude of the residual stresses depends on factors such as manufacturing technology, material, part geometry, scanning strategy, process parameters, preheating temperature and density of the component. In the present work, the magnitudes of residual stresses and distortions in austenitic stainless steel 316L components manufactured
Style APA, Harvard, Vancouver, ISO itp.
8

Qui, Jianhai. "A study by solution and surface analysis of passivation of stainless steel." Thesis, University of Surrey, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328789.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Rajput, Ajeet Singh, Henning Zeidler, and Andreas Schubert. "Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-227115.

Pełny tekst źródła
Streszczenie:
Plasma electrolytic Polishing (PeP) is a non-conventional technology for the surface treatment of electrically conductive materials. It is an effective machining technique for cleaning and polishing of metals and considered as a more environmentally friendly alternative to the electropolishing process. The electropolishing process uses aggressive media such as acids, whereas in PeP, acids or toxicants are replaced by low concentrated water solutions of various salts. In PeP, high DC voltage is applied to the electrodes in the aqueous electrolyte solution, which establishes a thin steam-gas lay
Style APA, Harvard, Vancouver, ISO itp.
10

Sobeih, Mahmoud Omar R. J., and Moazzam Maqsood. "Influence of Hydrogen Charging on Mechanical Properties and Microstructure of Structural Steel S235 & Stainless Steel 316L." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-18792.

Pełny tekst źródła
Streszczenie:
The present paper studied the influence of hydrogen on the mechanical properties and microstructure of the materials. This study is done by doing hydrogen charging of steel bar specimens. The two types of steel are used for study, structural steel S235 and stainless steel 316L. The tensile test has been performed to get the data of the charged and uncharged specimens. Different strain rates were used to study the effect of the material after charging. The charging time ranged from 24 hours to 144 hours. The specimens are cylindrical shape. Digital image analysis is performed for the uncharged
Style APA, Harvard, Vancouver, ISO itp.
11

Ornek, Cem. "Performance characterisation of duplex stainless steel in nuclear waste storage environment." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/performance-characterisation-of-duplex-stainless-steel-in-nuclear-waste-storage-environment(4db73e9b-c87c-40a6-9778-0b823b1c499f).html.

Pełny tekst źródła
Streszczenie:
The majority of UK’s intermediate level radioactive waste is currently stored in 316L and 304L austenitic stainless steel containers in interim storage facilities for permanent disposal until a geological disposal facility has become available. The structural integrity of stainless steel canisters is required to persevere against environmental degradation for up to 500 years to assure a safe storage and disposal scheme. Hitherto existing severe localised corrosion observances on real waste storage containers after 10 years of exposure to an ambient atmosphere in an in-land warehouse in Culham
Style APA, Harvard, Vancouver, ISO itp.
12

Scholz, J. "Experimental analysis and modelling of the mechanical behaviour of an unstable austenitic stainless steel." Paris 6, 2002. http://www.theses.fr/2002PA066549.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

Waterworth, Adelle. "Quantitative characterisation of surface finishes on stainless steel sheet using 3D surface topography analysis." Thesis, University of Huddersfield, 2006. http://eprints.hud.ac.uk/id/eprint/385/.

Pełny tekst źródła
Streszczenie:
The main aim of this project was to quantitatively characterise the developed surface topography of finishes on stainless steel sheet using three-dimensional surface analysis techniques. At present surface topography is measured using (mainly) stylus profilometry and analysed with 2D parameters, such as Ra, Rq and Rz. These 2D measurements are not only unreliable due to a lack of standardised measurement methodology, but are also difficult to relate directly to the actual shape of the topography in 3 dimensions. They bear little direct relation to the functional properties of the surface of st
Style APA, Harvard, Vancouver, ISO itp.
14

Clark, Tad Dee. "An Analysis of Microstructure and Corrosion Resistance in Underwater Friction Stir Welded 304L Stainless Steel." Diss., BYU ScholarsArchive, 2005. http://contentdm.lib.byu.edu/ETD/image/etd872.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
15

Lau, Sai Kin. "Minimally destructive and multi-element analysis of stainless steel by ArF laser-induced plume emissions." HKBU Institutional Repository, 2013. http://repository.hkbu.edu.hk/etd_ra/1507.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Howell, William R. N. "An analysis of possible microbiologically influenced crevice corrosion of 316 stainless steel in a seawater environment." Thesis, Monterey, California. Naval Postgraduate School, 1996. http://hdl.handle.net/10945/7939.

Pełny tekst źródła
Streszczenie:
An analysis was conducted of 316 Stainless Steel components which exhibited an unusual degree of crevice corrosion after exposure to seawater for approximately one year. After conducting research into the possible chemical and microbiological mechanisms for the corrosion, a metallurgical and microscopic examination of the components was performed. Results of these examinations indicated that the corrosion observed was probably the result of an interaction between the Gallionella aerobic iron bacteria and the anaerobic sulfate reducing bacteria Desulfovibrio and Desulfomaculum
Style APA, Harvard, Vancouver, ISO itp.
17

Howell, William R. N. (Robert Newton). "An analysis of possible microbiologically influenced crevice corrosion of 316 stainless steel in a seawater environment." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/39622.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
18

Matracia, Yoon-Mi(Sophie) L. "Pulpotomy to Stainless Steel Crown Ratio in Children with Early Childhood Caries: A Cross Sectional Analysis." Columbus, Ohio : Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1242096142.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

Furlanis, Silvia. "Towards a design approach for Wire-and-Arc Additively Manufactured stainless-steel elements." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/24627/.

Pełny tekst źródła
Streszczenie:
Additive Manufacturing has become more and more relevant in the recent years in the construction industry, while still being at its initial stage. In particular, Wire-and-Arc Additively Manufactured (WAAM) stainless-steel elements have yet to be properly analyzed from a structural response point-of-view, though many experimental campaigns and studies are being carried out to this day. This study is focused on the analysis of the results of tests conducted on WAAM-produced 308LSi stainless-steel specimens, in order to characterize the mechanical and geometrical properties of the printed mat
Style APA, Harvard, Vancouver, ISO itp.
20

Shen, Yanfei. "Geometrically non-linear analysis with stiffness reduction for the in-plane stability design of stainless steel frames." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/668529.

Pełny tekst źródła
Streszczenie:
In AISC 360-16, the Direct Analysis Method (DM) has been set as the primary method for the stability design of frames. DM, considering initial global sway imperfection, is essentially Geometrically Non-linear Analysis (GNA) in which tangent modulus is used. The aim of this thesis is to provide stiffness reduction factor formulations for using GNA coupled with tangent modulus approach for the stability design of stainless steel frames. GNA with the proposed stiffness reduction factor is aligned to AISC 360-16 and it is aimed at facilitating greater and more efficient use of stainless steel. In
Style APA, Harvard, Vancouver, ISO itp.
21

Kuriger, Raymond J. "Phase Analysis and Modeling of Scale Deposition in Steel Tubes." Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1450375676.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
22

Wasylyk, Andrew Paul. "New insights into the competition between ductile tearing and plastic collapse in 304(L) stainless steel components." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/new-insights-into-the-competition-between-ductile-tearing-and-plastic-collapse-in-304l-stainless-steel-components(e6692805-e5c8-4fb0-a351-7725579eeb96).html.

Pełny tekst źródła
Streszczenie:
Structural integrity assessment of nuclear components assessed using the R6 Failure Assessment Diagram approach requires an understanding of the limiting condition in terms of both fracture and plastic collapse. For ductile materials, such as stainless steels used for nuclear components, including the primary pipe-work of a Pressurised Water Reactor (PWR), the limiting condition defined by plastic collapse is likely to occur prior to the initiation of fracture. This is due to the relatively low yield stress of the material and the high fracture toughness. If this is the case, structural integr
Style APA, Harvard, Vancouver, ISO itp.
23

Taylor, John Bernard. "A theoretical analysis of the deposition of radioactive ions, particles and colloids from aqueous liquid onto a stainless steel surface." Thesis, University of Salford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358766.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
24

Tofique, Muhammad Waqas. "Initiation and early crack growth in VHCF of stainless steels : Experimental and theoretical analysis." Doctoral thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-47004.

Pełny tekst źródła
Streszczenie:
Mechanical fatigue is a failure phenomenon that occurs due to repeated application of mechanical loads. Very High Cycle Fatigue (VHCF) is considered as the domain of fatigue life greater than 10 million load cycles. Increasing numbers of structural components have service life in the VHCF regime, for instance in automotive and high speed train transportation, gas turbine disks, and components of paper production machinery. Safe and reliable operation of these components depends on the knowledge of their VHCF properties. In this thesis both experimental tools and theoretical modelling were util
Style APA, Harvard, Vancouver, ISO itp.
25

Mathis, Tyler Alan. "Predicting Hardness of Friction Stir Processed 304L Stainless Steel using a Finite Element Model and a Random Forest Algorithm." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/7591.

Pełny tekst źródła
Streszczenie:
Friction stir welding is an advanced welding process that is being investigated for use in many different industries. One area that has been investigated for its application is in healing critical nuclear reactor components that are developing cracks. However, friction stir welding is a complicated process and it is difficult to predict what the final properties of a set of welding parameters will be. This thesis sets forth a method using finite element analysis and a random forest model to accurately predict hardness in the welding nugget after processing. The finite element analysis code use
Style APA, Harvard, Vancouver, ISO itp.
26

Hurley, Caitlin Mae. "Kinetic study of hydrogen-material interactions in nickel base alloy 600 and stainless steel 316L through coupled experimental and numerical analysis." Phd thesis, Toulouse, INPT, 2015. http://oatao.univ-toulouse.fr/14454/1/hurley.pdf.

Pełny tekst źródła
Streszczenie:
In France all of the nuclear power plant facilities in service today are pressurized water reactors (PWR). Some parts of the PWR in contact with the primary circuit medium, such as the steam generator tubes (fabricated in nickel base alloy A600) and some reactor core internal components (fabricated in stainless steel 316L), can fall victim to environmental degradation phenomena such as stress corrosion cracking (SCC). In the late 1950's, H. Coriou observed experimentally and predicted this type of cracking in alloys traditionally renowned for their SCC resistance (A600). Just some 20 to 30 yea
Style APA, Harvard, Vancouver, ISO itp.
27

Reck, Barbara [Verfasser], and Vera Susanne [Akademischer Betreuer] Rotter. "Exploring the potential of material flow analysis through case studies of nickel and stainless steel / Barbara Reck. Betreuer: Vera Susanne Rotter." Berlin : Universitätsbibliothek der Technischen Universität Berlin, 2012. http://d-nb.info/1026483638/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
28

SUMIYA, LUIZ C. do A. "Medidas de desgaste em aco inoxidavel AISI 316 por meio de ativacao superficial em ciclotron." reponame:Repositório Institucional do IPEN, 2000. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10833.

Pełny tekst źródła
Streszczenie:
Made available in DSpace on 2014-10-09T12:44:30Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T13:57:38Z (GMT). No. of bitstreams: 1 06900.pdf: 5199147 bytes, checksum: 04b402ce42beb81a3094fe2294696f9f (MD5)<br>Dissertacao (Mestrado)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Style APA, Harvard, Vancouver, ISO itp.
29

BUTOLA, RAVI. "EXPERIMENTAL ANALYSIS OF WELD BEAD GEOMETRYIN SYNERGIC MIG WELDING OF 304L STAINLESS STEEL." Thesis, 2013. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15778.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Syu, Pei-Syuan, and 徐培軒. "Stainless Steel 304 and Stainless Steel 316 Finite Element Analysis of The Dynamic Mechanical Properties." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/r759p9.

Pełny tekst źródła
Streszczenie:
碩士<br>國立高雄應用科技大學<br>機械與精密工程研究所<br>102<br>Stainless steel is currently using the maximum amount of special steel, and stainless steel applications also increased year by year, for the use of metal for increasingly stringent safety conditions, the present study has two parts, the first part of the finite element analysis software Deform -3D simulated stainless steel 304 and stainless steel 316 in separate dynamic torsion bar MTKB (Modified Torsinal Bar) process of destruction, the second part to separate dynamic torsion bar MTKB (Modified Torsinal Bar) to instantly reverse the power to make the
Style APA, Harvard, Vancouver, ISO itp.
31

"Locational analysis for a stainless steel plant." Thesis, 2015. http://hdl.handle.net/10210/14513.

Pełny tekst źródła
Streszczenie:
M.Sc.<br>South Africa is a country richly-endowed with natural resources, including huge deposits of chromium and iron ore. Escom, the country's electricity utility, has access to huge amounts of spare generating capacity, which can be exploited to produce value-added products such as stainless steel (Columbus Stainless) and aluminium (Alusaf). These factors, together with the government's stated aim of increasing levels of beneficiation in South Africa, and the needs and requirements of the Reconstruction and Development Programme (RDP), mean that the country will embark on other major benefi
Style APA, Harvard, Vancouver, ISO itp.
32

OU, Hsin-yu, and 歐忻伃. "Competition analysis of Taiwan stainless steel fitting industry." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/74983635265112566127.

Pełny tekst źródła
Streszczenie:
碩士<br>國立中山大學<br>國際經營管理碩士班<br>100<br>In the past, the main force of Taiwan&apos;&apos;s economic development is the traditional manufacturing industry. After decades of changes in industrial structure, actual production plants of many factories have been moved to the outside of Taiwan only the of the administration center to stay in Taiwan. As of today, the number of manufacturing sector in Taiwan have been gradually diminished. However, the actual production capacity is very important to a country. Steel pipe and pipe fittings is infrastructure components that were used as a framework for pla
Style APA, Harvard, Vancouver, ISO itp.
33

Hsieh, Hsin-Han, and 謝欣涵. "Numerical analysis of stainless steel welding with pulsed laser." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/m5h3r5.

Pełny tekst źródła
Streszczenie:
碩士<br>國立臺灣師範大學<br>工業教育學系<br>96<br>This study simulates the laser welding process for butt joint of sheet metal verified by experiments. It aims at to investigate the changes of the temperature and stress field. The method of welding process is Nd: YAG laser welding with SUS 304 stainless steel as welding material. The finite element software Ansys is used for numerical simulation, which employs thermo-mechanical coupling process with consideration on non-linear material characteristics. The experiments measure the thermal cycle temperature in the welding process with thermocouple and the angul
Style APA, Harvard, Vancouver, ISO itp.
34

Xu, Cong-Yu, and 許聰裕. "The pollutant analysis from Stainless steel cold rolling process." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/40948078747542643476.

Pełny tekst źródła
Streszczenie:
碩士<br>國立高雄第一科技大學<br>環境與安全衛生工程研究所<br>103<br>The process of cold rolling of stainless steel will result in the formation of particulate matters (PM) and other pollutants due to the evaporation of the lubricant heated by the friction between the roll and the coil surface. The purpose of this study is to evaluate the characteristics and health hazards of the pollutants emitted from stainless steel cold rolling process. Sampling site in a stainless steel factory was determined by the aerosol number concentrations measured in the factory using P-trak aerosol counter. High volume PM sampler and XAD-2
Style APA, Harvard, Vancouver, ISO itp.
35

Huang, Chun-Ming, and 黃俊銘. "Springback Analysis of V-Shaped of Stainless Steel Connector." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/89885690340337094532.

Pełny tekst źródła
Streszczenie:
碩士<br>國立高雄應用科技大學<br>模具工程系<br>97<br>V-Shaped connector has been applied in many electronic devices as an interface component to connect battery and electronic board. The thin and small feature of it leads to the manufacturing problems in many aspects. One of the major difficulties is the accurate prediction and controlling of the elastic springback in the forming process. The objective of this study is to get a deeper understanding of the relationship between the springback angle and forming process parameters. The sheet metal used in this study is 0.1 mm thickness stainless steel (JIS SUS3
Style APA, Harvard, Vancouver, ISO itp.
36

Jane-An, Lee, and 李建安. "A Competitive Analysis of the Taiwan Stainless Steel Industry." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/18734082434695920207.

Pełny tekst źródła
Streszczenie:
碩士<br>淡江大學<br>國際貿易學系國際企業學碩士在職專班<br>96<br>The stainless steel industry is the fundamental industry of nation-building, the cornerstone of economic development. The industry relevance is so profound and comprehensive that it is closely correlated to the prosperity and recession of the overall economy; stainless steel is also divided into general steel and special steel. Stainless steel is special alloy steel enhanced with nickel (Ni), chromium (Cr)…etc. for longer life cycle, easy formation and process, elaborate exterior and at the same time environmental friendly, which is extensively applied
Style APA, Harvard, Vancouver, ISO itp.
37

Islam, Tayyab. "Analysis of Dissimilar Metal Welding of 1020 Mild Steel and 304 Stainless Steel." Thesis, 2014. http://ethesis.nitrkl.ac.in/5584/1/211ME2171-6.pdf.

Pełny tekst źródła
Streszczenie:
Joining of dissimilar metals causes a steep gradient of the thermo-mechanical properties along the weld. A variety of problems come up in dissimilar welding like cracking, large weld residual stresses, migration of atoms during welding compressive and tensile thermal stresses, stress corrosion cracking, etc. Weld residual stress and thermal stress have been analysed for dissimilar metal welding of 304 stainless steel to 1020 mild steel taking 302 stainless steel as the filler metal. Similarly taking strain developed as an index the susceptibility of the welded joint to stress corrosion crackin
Style APA, Harvard, Vancouver, ISO itp.
38

PENG, WEN-ZONG, and 彭文宗. "Endochronic cyclic visco-plastic analysis on type 304 stainless steel." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/72246001047314899113.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
39

SHEN, HAN-CONG, and 沈翰聰. "Endochronic multiaxial cyclic creep analysis for type 304 stainless steel." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/70374968051878323024.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
40

Chuang, Fu-Kia, and 莊復凱. "A Pressing Process Analysis of Variable Diameter Stainless Steel Elbow." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/44720109930098412500.

Pełny tekst źródła
Streszczenie:
碩士<br>國立勤益科技大學<br>機械工程系<br>98<br>Variable diameter stainless elbow tube is widely use in our life, like electric door track、mining mask、rain shelter、aisle stairs spiral arm…etc. The purpose of this study is use Finite element analysis(FEM) to simulation variable diameter stainless elbow tube stamping process, based on the compression properties of the material and the geometry of the tools used, we present a method can provides a model that predicts not only the correct punch load for press, but also the precise final shape of products after unloading. An elasto- plastic incremental finite-ele
Style APA, Harvard, Vancouver, ISO itp.
41

Fang-Ming, Chou, and 周芳銘. "Numerical Analysis of Laser Engraving on the Stainless Steel SUS304." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/20485391364616637775.

Pełny tekst źródła
Streszczenie:
碩士<br>國立屏東科技大學<br>車輛工程系所<br>96<br>In the process of laser engraving, the laser with high power density impinge on the work piece will increase the temperature gradient and induce the thermal stresses which usually cause the residual stress on structure. In this paper a finite element model with the moving heat source method and mesh remove technique was used to simulate the variation of the temperature field around the engraving region. Then, the thermal stresses and residual stress distributions can be calculated by the sequentially coupled thermal-stress analysis. The effects of parameters s
Style APA, Harvard, Vancouver, ISO itp.
42

CHENG, YUNG-YING, and 鄭雍穎. "Analysis on the Affecting Factor of Punching 304L Stainless Steel." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/05735730806069928971.

Pełny tekst źródła
Streszczenie:
碩士<br>國立高雄應用科技大學<br>機械與精密工程研究所<br>104<br>This study focused on the analysis on the affecting factor of punching 304L stainless steel. In the research, distinct thickness steel plates was analyzed on the different cutting gap by notches, collected the sample by SEM to display the surface before cutting. The finite element software DEFORM-2D was used to analyze to obtain the steel plate of coefficient of fracture criterion to predict accurate timing of the replacement of damaged equipment and subsequent analysis. The results shown the roll over zone is the affecting factor of the fracture criter
Style APA, Harvard, Vancouver, ISO itp.
43

Jyun-Jie, Lian, and 連峻杰. "Analysis of Stainless Steel Micro Tube Screw Thread Machining Process." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/2pybvp.

Pełny tekst źródła
Streszczenie:
碩士<br>國立勤益科技大學<br>機械工程系<br>106<br>This study aims to analyze stainless steel micro tube screw thread machining process with different internal thread pitches (0.2mm, 0.25mm, 0.3mm), hole diameters (Ø1, Ø1.13, Ø1.2), external thread pitches (0.25mm, 0.4mm), and outer diameters (Ø1.9, Ø1.94, Ø2). The effects of different friction factors (0.1, 0.3, 0.5, 0.7, 0.9) and tube thicknesses on micro tube screw thread machining process are also analyzed. The microscopic material parameters modified through the factor of proportionality are proceeded finite element analysis to realize the difference betw
Style APA, Harvard, Vancouver, ISO itp.
44

HUNG, YANG-CHING, and 洪揚景. "Finite element analysis in drawing of hexagonal stainless steel bars." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/pa4d3w.

Pełny tekst źródła
Streszczenie:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>107<br>This study mainly analyze the drawing process and discuss how the parameters in the drawing process will affect the size of the product. The material used in this study is stainless steel SUS316, and it’s flow stress curve is established through tensile test. Then input flow stress curve into simulation software to simulate. This study use the finite element simulation software DEFORM 3D to simulate drawing process, and the important parameters in the drawing process are discussed. The parameters include drawing speed, material temperature, parallel s
Style APA, Harvard, Vancouver, ISO itp.
45

劉家揚. "Dynamic Characteristics and Computer Modeling Analysis Of Stainless Steel Storage Tanks." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/93766620992326122775.

Pełny tekst źródła
Streszczenie:
碩士<br>國立成功大學<br>建築學系<br>88<br>Liquid storage tanks are vital parts of lifeline and industrial facilities in Taiwan.For liquid storage tanks,thin-walled circular cylindrical stainless tanks constitute the majority of storage tanks.Advantage of this typ of tanks include:(a) They are simple to design.(b)They are efficient in resisting primary hydrostatic pressure.(c)They are easy to construct.(d)They are light-weight and economical.However,in recent years,almost every strong earthquake has caused serious damage to cylindrical stainless tanks. The thesis mainly researches one of the most important
Style APA, Harvard, Vancouver, ISO itp.
46

Chen, Chi-Fan, and 陳啟帆. "Analysis of stainless steel surface characterization treated in salt bath treatment." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/93082163976826884963.

Pełny tekst źródła
Streszczenie:
碩士<br>國立中央大學<br>機械工程研究所<br>98<br>Stainless steel is widely used in industry due to its unique properties in strength and cor rosion resistance. Stainless steel treated by salt bath could introduce nitrogen and oxygen atoms to diffuse into matrix forming i ron oxide and chromium oxide and nitride as well to enhance the surface hardness for wear resistance. In the present study, three types of stainless steel, 304, 430 and 17-4 PH stainless steel were prepared and treated in NaNO3 (50 wt%) and KNO3 (50 wt%) salt bath for 0.5~2 hours at 450~650oC. After experiment, we observed and examined the th
Style APA, Harvard, Vancouver, ISO itp.
47

Kuo, Kin-Lung, and 郭金隆. "The Industrial Competition Analysis of Stainless Steel Flat Products in Taiwan." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/80448888963839528415.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Wang, Teno-Kuan, and 王登冠. "Stainless Steel Industry Analysis In Taiwan -Example of The Y Corp." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/85468305346388710807.

Pełny tekst źródła
Streszczenie:
碩士<br>義守大學<br>材料科學與工程學系碩士在職專班<br>101<br>Global steel industry have combined and expanded their production and enhance the scale.The first chapter of this study describes the motivation and purpose. The second chapter which is to understand the theory by reference to the relevant literature and discuss collates and analyzes, that the development of stainless steel, industrial application and current situation, and to understand the world's top ten steel mills combined with the introduction of the actual background. The third chapter introduces Yieh-United Steel's relevant background, organizati
Style APA, Harvard, Vancouver, ISO itp.
49

Ceng, Wei-Kai, and 曾緯凱. "Experimental and Numerical Analysis of Stainless Steel Microtube in Flaring Process." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/55290569103865308748.

Pełny tekst źródła
Streszczenie:
碩士<br>國立勤益科技大學<br>機械工程系<br>102<br>This study aims to discuss the miniaturization of micro tubes with scales. Aiming at the stainless steel micro tube material SUS316L, the effects of different semi-cone angles (35º, 40º, 45º, 50º, and 55º) and various fillet radii (0.3mm, 0.4mm, 0.5mm, 0.6mm, and 0.7mm) of dies on the micro tube end flaring forming are studied. With scale factors to modify the material parameters for Finite Element program analysis, the difference of the above dies with different semi-cone angles and fillet radii of in the micro tube flaring forming is understood. Finite Eleme
Style APA, Harvard, Vancouver, ISO itp.
50

Ye, Jiun-Ming, and 葉峻銘. "Analysis of stainless steel bipolar plates with micro-channel stamping processes." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/81672692614721713470.

Pełny tekst źródła
Streszczenie:
碩士<br>國立勤益科技大學<br>機械工程系<br>99<br>The aim of this study is to resolve the stainless steel bipolar plates with micro channel forming form stamping process and micro-size effect of the impact. Regarding the use of rigid punch on 50μm-thick stainless steel sheet (SUS 304) for micro-channel stamping process in this study, the channel design is 0.8*0.75mm. Besides, the finite element method and the experimental results are used to analyze the micro-stamping process key parameters. The use of finite element method and experimental comparison, to find the best process parameters. The methodology of el
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany bibliografiami na temat „Xrd analysis of stainless steel” dla innych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii