Bibliografias temáticas / Ambient conditions

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Ambient conditions"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 11 de setembro de 2023

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Ambient conditions".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Ambient conditions"

Calas, G., G. E. Brown, F. Farges, L. Galoisy, J. P. Itie e A. Polian. "Cations in glasses under ambient and non-ambient conditions". Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 97, n.º 1-4 (maio de 1995): 155–61. http://dx.doi.org/10.1016/0168-583x(94)00709-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Stajic, Jelena. "Quantum effects in ambient conditions". Science 356, n.º 6344 (22 de junho de 2017): 1243.3–1243. http://dx.doi.org/10.1126/science.356.6344.1243-c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Abbott, Andrew P., Robert C. Harris, Yi-Ting Hsieh, Karl S. Ryder e I.-Wen Sun. "Aluminium electrodeposition under ambient conditions". Phys. Chem. Chem. Phys. 16, n.º 28 (2014): 14675–81. http://dx.doi.org/10.1039/c4cp01508h.

Texto completo da fonte

Resumo:

The electrodeposition of aluminium is demonstrated using a eutectic mixture of aluminium chloride and urea and the use of a protective alkane layer enable aluminium to be deposited under ambient conditions.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bailey, Alan J., Sandeep Basra e Paul J. Dyson. "Homogeneous dehydrosulfurisation under ambient conditions". Green Chemistry 1, n.º 1 (1999): 31–32. http://dx.doi.org/10.1039/a808023b.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Plaisier, Jasper Rikkert, Lara Gigli e Andrea Lausi. "MCX@Elettra: powder diffraction in ambient and non-ambient conditions". Acta Crystallographica Section A Foundations and Advances 73, a2 (1 de dezembro de 2017): C317. http://dx.doi.org/10.1107/s2053273317092567.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Balema, Viktor P., Ihor Z. Hlova, Scott L. Carnahan, Mastooreh Seyedi, Oleksandr Dolotko, Aaron J. Rossini e Igor Luzinov. "Depolymerization of polystyrene under ambient conditions". New Journal of Chemistry 45, n.º 6 (2021): 2935–38. http://dx.doi.org/10.1039/d0nj05984f.

Texto completo da fonte

Resumo:

Ball milling of polystyrene under ambient conditions in metal containing vials causes scission of macromolecules, resulting in partial dismantling to styrene. Reactions proceeds via intermediate carbon-based free radicals that are detectable by EPR.

Estilos ABNT, Harvard, Vancouver, APA, etc.

REZUNKOV, Yu A., A. A. AGEICHIK, Yu P. GOLOVACHOV, Yu A. KURAKIN, V. V. STEPANOV e A. A. SCHMIDT. "Laser Propulsion at Ambient Vacuum Conditions." Review of Laser Engineering 29, n.º 4 (2001): 268–73. http://dx.doi.org/10.2184/lsj.29.268.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Proksch, Roger, Ken Babcock e Jason Cleveland. "Magnetic dissipation microscopy in ambient conditions". Applied Physics Letters 74, n.º 3 (18 de janeiro de 1999): 419–21. http://dx.doi.org/10.1063/1.123047.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Xiao, J., P. Liu e G. W. Yang. "Nanodiamonds from coal under ambient conditions". Nanoscale 7, n.º 14 (2015): 6114–25. http://dx.doi.org/10.1039/c4nr06186a.

Texto completo da fonte

Resumo:

Nanodiamonds with a cubic phase and a mean size of 3 nm are synthesized from various types of coal at atmospheric pressure and room temperature using a novel process involving laser ablation in liquid.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kalkowski, G., S. Risse e V. Guyenot. "Electrostatic chuck behaviour at ambient conditions". Microelectronic Engineering 61-62 (julho de 2002): 357–61. http://dx.doi.org/10.1016/s0167-9317(02)00501-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Ambient conditions"

Jjunju, F. P. M. "In-situ mass spectrometry analysis under ambient conditions". Thesis, University of Liverpool, 2016. http://livrepository.liverpool.ac.uk/3004973/.

Texto completo da fonte

Resumo:

Mass Spectrometry (MS) is an important analytical tool in the identification and quantification of a wide range of samples, primarily because of its speed, sensitivity, selectivity and versatility in analysing, gases, solids and liquids. MS is an interdisciplinary analytical tool, impacting many areas of science from physics, through chemistry, to biology. However MS is mainly limited to laboratory settings due to the high vacuum requirement needed for ion generation and processing. The main theme of this work is the development of ionisation methods that enable ion generation and processing under ambient conditions in the open air outside of the laboratory for in-situ applications. To that end, it is also important that ions are generated and processed with little or no extensive sample preparation steps required. In this work the development of two ambient ionisation methods: desorption atmospheric pressure chemical ionisation (DAPCI) and paper spray (PS) ionisation and their application for in-situ MS analysis is demonstrated. A DAPCI handheld ion source version based on DAPCI was developed to ignite a corona discharge in air and operates for up to 12 h continuously using only 12 V battery. Both DAPCI and PS ambient ionisation methods were implemented for in-situ MS analysis and were used to detect trace amounts (< ng) of different classes of chemical compounds (i.e hydrocarbons, explosives corrosion inhibitors and metaldehyde in waters samples); this was achieved rapidly (i.e. less than 1 minute) with little or no sample preparation in the open air. Both ambient ionisation methods (i.e., DAPCI and PS) were used with either a commercial instrument or with a custom miniature mass spectrometer to identify and characterize traces amounts of petroleum oil hydrocarbons and additives (e.g. quaternary ammonium corrosion inhibitors), and water pollutants (e.g. metaldehyde) with high sensitivity and selectivity. The handheld DAPCI and PS methods were also applied to the in-situ direct analysis of explosives. Good performance was achieved with the miniaturised instrument giving detection limits within an order of magnitude to those achieved using a benchtop commercial instrument. The results reported in this thesis should be of importance to those interested in ambient ionisation mass spectrometry, miniature mass spectrometry, in-situ MS analysis, oilfield chemical analysis, homeland and border security agencies and environmental monitoring.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Vant, Stewart Charles. "Investigation of fluid properties at non-ambient conditions". Thesis, University of Strathclyde, 2003. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=27056.

Texto completo da fonte

Resumo:

A requirement for thermophysical property data of diesel fuels at conditions removed from ambient was identified. A series of measurements of the pressure-volume-temperature relations of diesel fuels was undertaken using a Micro-PVT apparatus at pressures to 300MPa in the temperature range 25 to 75°C. A new calibration procedure for this instrument was devised to enable measurements of high accuracy to be made. Viscosity measurements of diesel fuels over a range of temperature and pressure were made using the National Engineering Laboratory high pressure viscometer to pressures of 460MPa in the temperature range 25 to 100°C.Corresponding states theory was applied for compressed liquid density prediction. Improvement in density prediction in this region was found through use of iso-octane and heptadecane as reference fluids. Compressibility factors of these were represented by Tait-style equations. An iterative solution technique was developed to allow the corresponding states method to be applied to diesel fuelsusing limited density measurement and a guess value of boiling point as inputs. Densities predicted from this method agreed well with measurements made using the Micro-PVT apparatus. Hard sphere theory was applied as a method for viscosity prediction. Despite the complexity of the diesel fuel mixture, reasonable estimates of viscosity were made with limited measurement input at higher temperatures. At lower temperatures, an additional simple empirical correction term was required. A method of viscosity estimation of complex hydrocarbon mixtures based upon composition is presented. Further development of this would require additional measurements and greater characterisation of the fuel.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Spicer, Christopher D. "Suzuki biology : palladium mediated reactions under ambient conditions". Thesis, University of Oxford, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.711749.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Takebayashi, Yoshihiro. "Dipolar hydration structure from ambient to supercritical conditions". 京都大学 (Kyoto University), 2004. http://hdl.handle.net/2433/145456.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Smith, Philip S. "Systematic studies of crystal structures under non-ambient conditions". Thesis, Durham University, 2004. http://etheses.dur.ac.uk/2996/.

Texto completo da fonte

Resumo:

Variable temperature single crystal X-ray diffraction analysis has been used to study four molecular systems: 4-(p-trlfluoromethyl phenylethynyl) prefluorotoluene (1), 2-methyl-4-(4-trifluoromethyl-phenyl) but-3-yn-2-ol (2), phenylethynyl perfluorotoluene (3) and Zinc Pyromellitate. In the case of the systems (1) - (3), the aim was to analyse the extent of the dynamic disorder in the CF3 groups that are contained in these systems. To this end, segmented rigid body analysis has been employed to estimate forces constants and barriers to rotation of the relevant groups. Complimentary computational methods have been used to obtain further estimates of this barrier to rotation in these systems for both the isolated (gas phase) molecules and for the condensed matter phases for compounds (1) and (3).For Zinc Pyromellitate, variable temperature single crystal X-ray and neutron analysis have been used to probe the behaviour of a proton that sits in a short, strong intramolecular hydrogen bond. The aim here was to discover whether the system exhibits proton migration along the hydrogen bond as a function of temperature and thus gain insights into the energy potential well in which the proton sits. To this end, both computational methods have been used to study the pyromellitate fragment, and variable temperature full crystal structure data so as to gain direct access to information regarding this potential well.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Vilalai, Sirapong. "Forecasting odor levels for biosolids product based on ambient conditions". College Park, Md. : University of Maryland, 2004. http://hdl.handle.net/1903/128.

Texto completo da fonte

Resumo:

Thesis (M.S.) -- University of Maryland, College Park, 2004.
Thesis research directed by: Dept. of Civil and Environmental Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Conere, Thomas James. "The radiobiological effects of gas mixtures under ambient and hyperbaric conditions". Thesis, Queen's University Belfast, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292290.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cardellach, i. Redon Mar. "Study of interfacial water at the nanoscale at ambient conditions with SPM". Doctoral thesis, Universitat Autònoma de Barcelona, 2012. http://hdl.handle.net/10803/107707.

Texto completo da fonte

Resumo:

La tesi que es presenta es veu emmarcada dins l’àrea de ciència de superfícies. Dos dels grans temes desenvolupats en aquesta tesi estan relacionats amb l’estudi de superfícies amb constants de xarxa (distàncies atòmiques que componen la molècula) properes a la del pla basal de la fase hexagonal del gel (Ih) (el gel més comú a l’escorça terrestre). L’objectiu d’aquesta premissa és veure com superfícies que tenen la constant de xarxa propera a la del gel (Ih) provoquen que l’aigua d’origen atmosfèric s’adsorbeixi a sobre en forma d’aigua en estat sòlid (gel) i no en forma d’aigua líquida a temperatures relativament altes. Aquest tipus de superfícies tindrien grans utilitats en processos meteorològics tals com la inducció de pluja, comercialització de productes propulsors de neu artificial o simplement per a conèixer els límits de congelació de l’aigua en sistemes biològics. En el capítol 3, es presenta el BaF2 com a possible nucleador de gel sobre la seva superfície, ja que la seva constant de xarxa difereix només un 4% de la del gel (Ih). Amb l’ajuda d’un microscopi de forces atòmiques (AFM) s’ha pogut observar com les molècules d’aigua difonen fàcilment sobre la seva superfície, i a més a més aquestes tenen preferència en la seva acomodació. S’ha observat que els esglaons de BaF2 i les zones que tenen un excés de càrrega degut al clivatge, són els defectes ideals per l’aigua, ja que s’hi sent molt més còmode. Aquests esglaons generats durant el clivatge tenen unes direccions cristal·logràfiques concretes i ben definides, i l’aigua no té una preferència aleatòria per ells sinó que, contràriament del que pensàvem, les molècules d’aigua tenen en general més afinitat per aquells esglaons menys energètics, amb menys densitat d’àtoms al descobert. El BaF2 no és un bon nucleador pel que fa al creixement de gel tridimensional, ja que la conformació que adopten les molècules d’aigua paral·lela al pla no afavoreix la formació de gel tridimensional, però gràcies a la seva constant de xarxa i als defectes ocasionats durant el clivatge resulta que és un nucleador bidimensional. S’ha seguit el mateix patró pel CaF2, un compost isoestructural del BaF2, amb la diferència que té una constant de xarxa més petita, que difereix un 14% respecte la cara basal del gel (Ih). Els experiments realitzats mostren com l’aigua s’hi adsorbeix de manera aleatòria i més caòtica, tot i que té certa preferència pels esglaons com en el cas del BaF2. Podem concloure doncs, que la constant de xarxa és un paràmetre molt important, però no és l’únic. En el capítol 5, es planteja l’opció d’obtenir una superfície de manera artificial, amb les característiques que busquem per tal que l’aigua s’hi adsorbeixi en forma de gel (Ih) fàcilment. La tècnica utilitzada per aquest propòsit és la Langmuir-Blodgett, la qual ens permet fer monocapes en l’interfase líquid-gas, i es poden transferir a una superfície sòlida. Depenent de la superfície, obtindrem monocapes hidrofòbiques o hidrofíliques. Tot i que l’objectiu llunyà és formar una monocapa ideal i observar a través de l’AFM com s’adsorbeix l’aigua a sobre, fins ara s’ha aconseguit formar superfícies hidrofíliques a partir de substrats hidrofòbics (grafit) i també formar superfícies hidrofòbiques a partir de substrats hidrofílics (mica). Les molècules utilitzades per a la formació de les monocapes són alcohols alifàtics de cadena llarga, estudiats a la bibliografia com a possibles bons nucleadores de gel. En el capítol 4, l’atenció es veu desviada per l’investigació de la càrrega residual que es produeix a sobre de les superfícies. Per les propietats electròniques que té el grafè, es va creure convenient fer-lo servir de superfície model. A través de la punta d’AFM s’ha injectat càrrega a una làmina de grafè sobre òxid de silici, i s’ha vist com la càrrega provocada per la punta es va dissipant cap a l’òxid de silici en funció de la humitat relativa. Amb aquest estudi es va poder analitzar l’efecte de càrrega residual en superfícies i el rol que hi juga l’aigua. En aquest treball també es va fer pal·lesa que les dimensions de la punta determinaven fortament les mesures electroestàtiques en AFM.
This thesis is framed into the surface science area. Two main chapters developed in the present work are related to the study of surfaces with lattice constant near to the basal plane of the hexagonal ice (Ih) (the most common ice on Earth). The main goal of this topic is observe how these surfaces induce water adsorption on its surfaces as solid water at high temperatures. These surfaces could be used in meteorological processes such as rain induction, snow making industry or the knowledge of the freezing limits of water in biological systems. In chapter 3, BaF2 is presented as a possible ice nucleation because its lattice constant differs only 4% respect to the basal plane of the hexagonal ice (Ih). With the help of an Atomic Force Microscopy (AFM) it can be observed how water molecules easily spread on the surface and showing adsorption preferences. It was observed that steps and charge excess zones on BaF2 surface are perfect defects to water molecules anchoring, where water molecules feel more comfortable. Steps generated during the cleavage have specific and well defined crystallographic directions, and water molecules have preference and more affinity for the less energetic steps (with less atomic density). Finally, it is concluded that BaF2 is not a good three-dimensional nucleator because the conformation of water molecules onto the plane does not promote the ice formation, but the lattice constant and defects caused during the cleavage make it a good two-dimensional ice nucleator. The same studies were performed on CaF2, an isostructural compound of BaF2 but with a different lattice constant, which differs 14% from basal plane of the hexagonal ice (Ih). The experiments show chaotic and random water adsorption on CaF2 but with a certain preference to the steps. It can be concluded that the lattice constant is an important parameter to consider but is not the only parameter to take account. In chapter 5, the construction of an artificial surface with specific characteristics is proposed. The goal is to create a surface capable to induce water freezing. The technique used for this purpose is the Langmuir-Blodgett trough, which allows a monolayer formation in the liquid-gas interface that can be transferred to a solid substrate. Depending on the surface, hydrophilic or hydrophobic monolayers are obtained. Although water adsorption with AFM was studied yet in this thesis, we were able to form hydrophobic surfaces from hydrophilic substrates (mica) and hydrophilic surfaces from hydrophobic substrates (graphite). The molecules used for this purpose are long chain aliphatic alcohols, studied in the bibliography as probably good ice nucleators. In chapter 4 our attention is diverted to the study of residual charge produced on the surfaces. Due to the electronic properties of graphene, it was thought appropriate to use it as a model surface. Using the AFM tip charge was injected onto a graphene sheet deposited on a silicon oxide wafer, and discharging of the graphene sheet was observed. The charge spreading to the silicon oxide depends on the relative humidity. The role of adsorbed water in the discharge of surfaces was analysed. This work also demonstrated that the probe dimensions have critical influence on the electrostatic measures in AFM.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hargreaves, Natasha Jayne. "Crystallisation of nano-quartz and nano-graphite from microemulsions under ambient conditions". Thesis, Durham University, 2016. http://etheses.dur.ac.uk/11725/.

Texto completo da fonte

Resumo:

The principal basis for the following work is to demonstrate the importance of controllable crystallisation and consequential applications for both silica-based significant inorganic materials and carbonaceous materials. Microemulsions have been employed as a vector to explore the possibility of thermodynamically controlling the crystallisation process, utilising the 3D confinement of crystallisable material within nano-scale droplets. This opens a route to circumvent Ostwald’s Rule of Stages, for a multitude of potential applications. We show here that both quartz and nanographite can be synthesised at room temperature and pressure using this methodology. Previous attempts at silica synthesis from within the microemulsion have only presented the amorphous phase, leaving many questions unanswered, whilst failing to reveal the underlying cause. Further, traditional methods of quartz synthesis employs hydrothermal conditions, or temperatures >1100 0C. Microemulsions were adopted to behave as confined mini reactors for the synthesis of α-quartz at room temperature and pressure from a precursor from sodium metasilicate nonahydrate (SMS) which can be used as a precursor of silica, circumnavigating the traditional hydrothermal methodologies. At higher supersaturations, both the metastable amorphous phase and the high temperature polymorph, cristobalite were also observed. Upon the acidification of the microemulsions, the size and morphology of the quartz nanoparticles was found to be dependent upon the pH and the ratio of surfactant:silica units. Conventional wisdom stipulates that graphite can only be produced using high temperatures, with natural graphite arising via progressive metamorphisms of carbonaceous material subjected to temperatures above ~600 K and pressures >2 kbar. Previous attempts to use carbohydrate precursors have resulted in the formation of luminescent carbon dots or required templation, followed by calcination. In these prior investigations, high temperatures or extremely severe reactants are used to drive the precipitation of graphitic forms. Analogous experiments were successful in employing the 3D nano-confinement microemulsions as confined mini reactors for the synthesis of nanographite at room temperature and pressure from a sucrose precursor, through a simple process of acidifying sucrose microemulsions. Crucially, the reaction was conducted in nanometre-sized microemulsion droplets to exert control over the reaction and sheet stacking process, ensuring that only sufficiently pristine graphene nanosheets could stack, thereby producing nanographite in a simple one-step synthesis under ambient conditions. The primary nanographitic particles of size ~3-30 nm stacked to form larger µm-sized nanographitic aggregates. The amount of nanographite produced from the microemulsions is limited as sucrose concentration must be kept very low to slow the reaction kinetics to ensure the mainly graphitic, rather than amorphous, product.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Erdem, Ayça. "Short-term toxicity of photocatalytic titanium dioxide to bacteria under ambient conditions". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 204 p, 2008. http://proquest.umi.com/pqdweb?did=1679680941&sid=14&Fmt=2&clientId=8331&RQT=309&VName=PQD.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Ambient conditions"

Schulte, Kathrin, Cameron Tropea e Bernhard Weigand, eds. Droplet Dynamics Under Extreme Ambient Conditions. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-09008-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Baird, Zane. Manipulation and Characterization of Electrosprayed Ions Under Ambient Conditions. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-49869-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Fernández Hermana, Luis Angel, 1946-, ed. El medi ambient vist pel Sud. Barcelona: Beta Editorial, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Catalonia (Spain). Departament de Medi Ambient., ed. Informe sobre l'estat del medi ambient a Catalunya. [Barcelona]: Generalitat de Catalunya, Departament de Medi Ambient, 1999.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Serra, Joan Mayol. Medi ambient, ecologia i turisme a les Illes Balears. Mallorca: Moll, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

United States. National Aeronautics and Space Administration., ed. Ambient effects on basalt and rhyolite lavas under Venusian, subaerial, and subaqueous conditions. [Washington, DC: National Aeronautics and Space Administration, 1997.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chesapeake Bay Program (U.S.), ed. Ambient toxicity testing in Chesapeake Bay: Year 8 report. Annapolis, Md: Chesapeake Bay Program, 2000.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

National Research Council (U.S.). Transportation Research Board, Airport Cooperative Research Program e United States. Federal Aviation Administration, eds. Measurement of gaseous HAP emissions from idling aircraft as a function of engine and ambient conditions. Washington, D.C: Transportation Research Board, 2012.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Boada, Martí. Diari de la natura: Crònica del paisatge i del medi ambient a Catalunya. Barcelona: Edicions 62, 1999.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Ambient conditions"

Gooch, Jan W. "Ambient Conditions". In Encyclopedic Dictionary of Polymers, 33. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_533.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Rössler, J., M. Kiwi e M. Markus. "Ecosystems Under Varying Ambient Conditions". In Springer Series in Synergetics, 319–30. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-73688-9_34.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Schauries, Daniel. "Ion Track Formation Under Ambient Conditions". In Ion Tracks in Apatite and Quartz, 79–95. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96283-2_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Elovaara, Jarmo, e Angela Klepac. "Impact of Ambient Conditions on Substations". In Substations, 903–15. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-49574-3_40.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Alani, Mostafa, e Arash Soleimani. "reTessellate: Modular Dynamic Surfaces Reactive to Socio-Environmental Conditions". In Distributed, Ambient and Pervasive Interactions, 113–23. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-21935-2_10.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Boring, Eric, Yurii V. Geletii e Craig L. Hill. "Catalysts for selective aerobic oxidation under ambient conditions". In Advances in Catalytic Activation of Dioxygen by Metal Complexes, 227–64. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/0-306-47816-1_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Puigmartí-Luis, Josep, Wojciech J. Saletra, Asensio González, Lluïsa Pérez-García e David B. Amabilino. "Assembling Supramolecular Rotors on Surfaces Under Ambient Conditions". In Single Molecular Machines and Motors, 127–41. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13872-5_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Norby, Poul, e Ulrich Schwarz. "Chapter 15. Powder Diffraction under Non-ambient Conditions". In Powder Diffraction, 439–63. Cambridge: Royal Society of Chemistry, 2008. http://dx.doi.org/10.1039/9781847558237-00439.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Grabis, Jānis, Kristina Jegorova e Krišjānis Pinka. "Design of Ambient Conditions Control Capability in Retail". In Innovative Intelligent Industrial Production and Logistics, 36–49. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-37228-5_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Baird, Zane. "3D Printed Annular Focusing Ambient Ion Mobility Spectrometer". In Manipulation and Characterization of Electrosprayed Ions Under Ambient Conditions, 39–56. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-49869-0_4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Ambient conditions"

Nylund, Nils-Olof, Maija Lappi, Juhani Laurikko, Eero Leppämäki e Kai Sipilä. "Measurement of Regulated and Unregulated Emissions at Low Ambient Temperature". In Subzero Engineering Conditions Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920004.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Larson, Robert E. "Vehicle Emission Characteristics Under Cold Ambient Conditions". In 1989 Subzero Engineering Conditions Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1989. http://dx.doi.org/10.4271/890021.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Laurikko, Juhani K. "Automotive Exhaust Emissions at Low Ambient Temperature". In 1989 Subzero Engineering Conditions Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1989. http://dx.doi.org/10.4271/890003.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Laurikko, Juhani. "Optimizing Three-Way Catalyst Emission Control System for Low Ambient Temperature Operations". In Subzero Engineering Conditions Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920012.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zhao, Chenglong. "Opto-Thermomechanical Nanoprinting under ambient conditions". In Optical Manipulation and Its Applications. Washington, D.C.: OSA, 2021. http://dx.doi.org/10.1364/oma.2021.aw3d.3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Boccaletti, C., P. Di Felice e E. Santini. "Designing photovoltaic plants for extreme ambient conditions". In 2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010). IEEE, 2010. http://dx.doi.org/10.1109/speedam.2010.5542222.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Boccaletti, C., P. Di Felice e E. Santini. "Designing wind plants for extreme ambient conditions". In 2010 XIX International Conference on Electrical Machines (ICEM). IEEE, 2010. http://dx.doi.org/10.1109/icelmach.2010.5607915.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Schweitzer, Dirk. "A method to adapt Zth-junction-to-ambient curves to varying ambient conditions". In 2012 IEEE/CPMT 28th Semiconductor Thermal Measurement & Management Symposium (SEMI-THERM). IEEE, 2012. http://dx.doi.org/10.1109/stherm.2012.6188850.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Alexander, A. G., C. J. May e C. R. Smith. "Factors Affecting Pumpability and Cold Cranking in Heavy Duty Diesel Truck Engines at Low Ambient Temperatures - Part II". In Subzero Engineering Conditions Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920023.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Andre, Laura B., Long Cheng, Alexander J. Salkeld, Luis H. Andrade, Sandro M. Lima, Junior R. Silva e Stephen C. Rand. "Laser cooling under ambient conditions in Yb3+:KYW". In Photonic Heat Engines: Science and Applications, editado por Richard I. Epstein, Denis V. Seletskiy e Mansoor Sheik-Bahae. SPIE, 2019. http://dx.doi.org/10.1117/12.2507325.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Ambient conditions"

G. Moridis e Q. Hu. Radionuclide Transport Models Under Ambient Conditions. Office of Scientific and Technical Information (OSTI), março de 2000. http://dx.doi.org/10.2172/837084.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

G. Moridis e Q. Hu. Radionuclide Transport Models Under Ambient Conditions. Office of Scientific and Technical Information (OSTI), dezembro de 2001. http://dx.doi.org/10.2172/795697.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

S. Magnuson. RADIONUCLIDE TRANSPORT MODELS UNDER AMBIENT CONDITIONS. Office of Scientific and Technical Information (OSTI), novembro de 2004. http://dx.doi.org/10.2172/841251.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Janus, M. C., G. A. Richards, M. J. Yip e E. H. Robey. Effects of ambient conditions and fuel composition on combustion stability. Office of Scientific and Technical Information (OSTI), abril de 1997. http://dx.doi.org/10.2172/468492.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Takahashi, Lynelle Kazue, e Russell L. Jarek. Evaluating T2 Conversion to Tritiated Water under Ambient Conditions - Case Study. Office of Scientific and Technical Information (OSTI), maio de 2020. http://dx.doi.org/10.2172/1630800.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dungee, Ryan. Quantifying the performance of charge-coupled devices in ambient conditions - Oral presentation. Office of Scientific and Technical Information (OSTI), agosto de 2015. http://dx.doi.org/10.2172/1213205.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chapman, Keshavarz e Johnson. L52078 Ambient Temperature Effects on Turbocharger Performance. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), maio de 2003. http://dx.doi.org/10.55274/r0011222.

Texto completo da fonte

Resumo:

The objective of this project was to either validate the current correlations or develop a new correlation that are used to compare compressor maps. Most compressor maps are presented at standard temperature and pressure. In order to compare data that is not collected at these conditions, correlations are used to relate the data to standard conditions. This project analyzes the validity of currently used correlations and provides improved correlations as needed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Burnham, A., R. Gee, A. Maiti, R. Qiu, P. Rajasekar, B. Weeks e L. Zepeda-Ruiz. Experimental and Modeling Characterization of PETN Mobilization Mechanisms During Recrystallization at Ambient Conditions. Office of Scientific and Technical Information (OSTI), novembro de 2005. http://dx.doi.org/10.2172/886924.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Delegard, Calvin H., Bruce E. Schmitt e Andrew J. Schmidt. Transportability Class of Americium in K Basin Sludge under Ambient and Hydrothermal Processing Conditions. Office of Scientific and Technical Information (OSTI), agosto de 2006. http://dx.doi.org/10.2172/896346.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Montemayor, A. F., e E. C. Owens. Comparison of Single Grade and Multiviscosity Lubricants in M60 Tanks under Hot Ambient Conditions. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1988. http://dx.doi.org/10.21236/ada202989.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!