Literatura científica selecionada sobre o tema "Black wattle"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Black wattle".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Black wattle"
1
S.O.K., Fajemilehin, e Adegun M.K. "PHENOTYPIC VARIATION OF SOME QUALITATIVE TRAITS IN WEST AFRICAN DWARF GOATS". International Journal of Research -GRANTHAALAYAH 8, n.º 5 (28 de maio de 2020): 94–99. http://dx.doi.org/10.29121/granthaalayah.v8.i5.2020.83.
Texto completo da fonteResumo:
Each class of livestock has some peculiar qualitative traits and in goats some of these are coat pigmentation, horned/polled, beard/non-beard, wattled/non-wattled. Since the impact of environment is important in phenotypic expression of qualitative traits, it becomes expedient to examine these features in West African Dwarf Goats (WADG) from every climatic region of the world. To accomplish this, a total of 623 WADGs aged between 3 and 4 years reared extensively in Ekiti state region of Nigeria were purposively selected from the three agricultural zones in the state for the examination. Data were collected on coat pigmentation, horns, wattle and beard on sex basis. The commonest pigmentation was black at 31.29%, 35.43% and 34.18% in the three zones and the least encountered was mixed pigmentation at 11.66%, 07.62% and 08.44% respectively. The number without wattles (57%) outnumbered those with wattles (43%). 88% had no beards and 87% were horned. 30% of does had wattles and 59% were horned as against 13% and 29%, respectively in bucks. In all, 2% of doe and 9% of buck had beards. The levels of variation in the traits surveyed in the three Districts indicated that WADGs in the region are predominantly black, not wattled, not bearded and horned.
2
Ekayanti, Novia, Indriyanto . e Duryat . "Pengaruh Zat Alelopati Dari Pohon Akasia, Mangium, Dan Jati Terhadap Pertumbuhan Semai Akasia, Mangium, Dan Jati". Jurnal Sylva Lestari 3, n.º 1 (9 de fevereiro de 2015): 81. http://dx.doi.org/10.23960/jsl1381-90.
Texto completo da fonteResumo:
ABSTRACT Allelopathy is the compound released by the plants to the environtment where actualy another plants is living in. The purpose of this research were to find out the effect of allelopathy which came from earpod wattle (Acacia auriculiformis), black wattle (Acacia mangium), and teak (Tectona grandis) to the seedlings plants of earpod wattle, black wattle, and teak, and also to find out the effect of allelopathy above mentioned that had the weakest effect. This research was designed based on factorial in a complete random design. Factor I was the seedlings which consist of earpod wattle, black wattle, and teak, while factor II was the allelopathy which consists of non allelopathy was used, the use of allelopathy from the extraction of earpod wattle leaves, the extraction of black wattle leaves, and the extraction of teak leaves. The variable that was observed were seedlings height increasing, seedlings stem diameter increasing, number of leaves increasing, and living percentage of the seedlings. This observation data was tested by Bartlett test to know the homogenity of variance. Then it was analyzed by analysis of variance, then it is continually tested by least significant difference test. All the counting were done at 5% significant level. The result of this research showed that allelopathy which one came from earpod wattle, black wattle, and teak were not different effect for seedlings from allelopathy source in the same species. The giving of black wattle allelopathy had significant different effect in height earpod wattle seedlings. That also the giving of teak allelopathy had significant different effect in height black wattle seedlings. The earpod wattle allelopathy had significant different effect in diameter of stem earpod wattle, black wattle, and teak seedlings. Key words : allelopathy, extraction of earpod wattle, black wattle, and teak, seedlings growth
3
Odubote, I. K. "INFLUENCE OF QUALITATIVE TRAITS ON THE PERFORMANCE OF WEST AFRICAN DWARF GOATS". Nigerian Journal of Animal Production 21 (3 de janeiro de 2021): 25–28. http://dx.doi.org/10.51791/njap.v21i1.1082.
Texto completo da fonteResumo:
Data on coat colour pigmentation and incidence of wattle were combined with production records of 1407 West African dwarf goats to study their influence on litter traits and body weight. There was no significant (P>0.05) difference among coat colours for litter size at birth and at weaning and birth weight. Basic white coloured goats were significantly (P <0.05) heavier at weaning and one year of age than the basic brown and black goats. The trend was that the weight decreased with increased pigmentation. Presence or absence of wattle did not exert any influence on the traits studied except yearling body weight Bilaterally wattled goats were lighter (P<0.01) than unilaterally wattled and non wattled goats.
4
Suharti, Tati, Tri Joko e Triwidodo Arwiyanto. "DETEKSI BAKTERI PATOGEN TERBAWA BENIH AKOR (ACACIA AURICULIFORMIS A. CUNN. EX BENTH.)". JURNAL HAMA DAN PENYAKIT TUMBUHAN TROPIKA 17, n.º 1 (3 de maio de 2017): 19. http://dx.doi.org/10.23960/j.hptt.11719-36.
Texto completo da fonteResumo:
Detection of seed-borne pathogenic bacteria of northern black wattle (Acacia auriculiformis A. Cunn. ex enth.). Intensive research of seed-borne pathogen of A. mangium and A. crassicarpa which have been established in industrial timber estate (HTI) was undertaken in Indonesia, while plantings development of northern black wattle have recently been established in the 1990s. Very limited information available on northern black wattle diseases especially seed-borne diseases. The objectives of this study were to identify seed-borne pathogenic bacteria of northern black wattle and the effects on seed germination. Methods for the isolation of bacteria were by seed soaking, seed griding, blotter test, growing-on test on paper and soil. Identification of bacteria by PCR used 63F/1387R primer. The results showed that seed-borne bacteria of northern black wattle were Paenochrobactrum sp., Ralstonia sp., Burkholderia cepacia complex, Pseudomonas stutzeri, Acinetobacter sp., Alcaligenes faecalis, Salmonella bongori, Escherichia hermannii while pathogenic bacteria cause seedling leafspot were Micrococcus luteus and Burkholderia cepacia complex. Burkholderia cepacia complex, A. faecalis, Acinetobater sp., P. stutzeri, S. bongori and Ralstonia sp. reduced seed germination and increased rotten seed, suggested that they were the pathogenic bacteria of northern black wattle seed. Ralstonia sp. significantly increased the percentage of rotten seed and decreased shoot length and root length. P. stutzeri and S. bongori significantly inhibited the root growth. Paenochrobactrum sp. and E. hermannii were assumed as pathogen with weak virulence due to seed germination, the percentage of rotten seed and vigour index were relatively similar to untreated seed.
5
Peres, Rafael Silveira, Eduardo Cassel e Denise Schermann Azambuja. "Black Wattle Tannin As Steel Corrosion Inhibitor". ISRN Corrosion 2012 (9 de abril de 2012): 1–9. http://dx.doi.org/10.5402/2012/937920.
Texto completo da fonteResumo:
In order to reduce the environmental impacts caused by chemical substances harmful to the environment and human health, the black wattle tannin can be used as an environmentally friendly corrosion inhibitor in acid and near neutral media. This paper provides information on the application of black wattle tannin as an inhibitor against the corrosion of carbon steel. The inhibition was evaluated using potentiodynamic polarization (PP) and electrochemical impedance spectroscopy (EIS) at room temperature in aerated 0.1 mol L−1 Na2SO4 (pH 6.0 and 2.5). The black wattle tannin when used as a corrosion inhibitor is more effective at acidic pH, its efficiency being dependent on its concentration. At the higher pH value (pH 6.0), a blue-black film (ferric tannate) with a short-term protection against corrosion was formed in aerated aqueous solution. At pH 2.5, this blue-black film was not observed.
6
Odubote, I. K. "CHARACTERIZATION OF THE WEST AFRICAN DWARF GOAT FOR CERTAIN QUALITATIVE TRAITS". Nigerian Journal of Animal Production 21 (3 de janeiro de 2021): 37–41. http://dx.doi.org/10.51791/njap.v21i1.1087.
Texto completo da fonteResumo:
Records on 1344 West African dwarf goats collected between 1982 and 1992 were used in this study. The records were used to describe determine the mode of inheritance for certain qualitative traits in the breed. All the goats have the stiff, short and straight hair coat type. The goat colour was very variable, irregular and this include white, black brown, pied and mixed colours. Nonetheless basic black colour predominate (53.3%). Basic white and brown goats account for 6.8% and 39.9% respectively. All goats studied irrespective of sex were horned. The goats also have a pair of teats observed. Possession of beard is common in all breeding bucks, nonetheless, 11.6% of the females have beard. About two-thirds of thegoats were wattled which could be bilateral (63%) or unilateral (6.2%) but no sex difference was observed. The mean lengths of body hair, ruff on bisket, wattle, beard in males and females were 2.90±0.80cm, 10.90±3,30 cm, 2.40±0.70 cm, 7.40cm±3.20cm and 9.20±2.7cm, respectively. Gene frequencies of 0.66, 0.08, 0.33and 1.0 were obtained for presence of wattle, albinism, black pigmentation and non polled respectively.
7
Weber, Richard W. "Allergen of the Month—Black Wattle". Annals of Allergy, Asthma & Immunology 113, n.º 6 (dezembro de 2014): A13. http://dx.doi.org/10.1016/j.anai.2014.10.017.
Texto completo da fonte
8
Donnelly, D., F. J. Calitz e I. M. R. Van Aarde. "Insecticidal control of Melanterius servulus (Coleoptera: Curculionidae), a potential biocontrol agent of Paraserianthes lophantha (Leguminosae), in commercial seed orchards of black wattle, Acacia mearnsii(Leguminosae)". Bulletin of Entomological Research 82, n.º 2 (junho de 1992): 197–202. http://dx.doi.org/10.1017/s0007485300051725.
Texto completo da fonteResumo:
AbstractA seed-feeding weevil, Melanterius servulus Pascoe, is considered suitable for release against the weed Paraserianthes lophantha. However, host specificity tests have indicated that M. servulus may also develop on the seeds of Acacia mearnsii (black wattle), which is both a weed and a crop plant in South Africa. Seed orchards, which supply the black wattle industry, may therefore need to be protected. The aim of this study was to determine whether the two pyrethroid insecticides presently used in wattle plantations against the wattle bagworm (Kotochalia junodi Heylaerts (Lepidoptera: Psychidae)) are effective against M. servulus. Since M. servulus has not yet been released in South Africa, field trials were not possible, and evidence that black wattle seed orchards can be protected from M. servulus was obtained indirectly, in two stages. Firstly, field trials showed that the two insecticides effectively protect the weed Acacia longifolia from a closely related weevil, Melanterius ventralis Lea, which has already been established as a biocontrol agent. Secondly, quarantine laboratory trials demonstrated that M. ventralis and M. servulus showed similar avoidance responses and similar levels of mortality when exposed to the insecticides. All the evidence indicates that the chemical protection of A. mearnsii seed orchards from M. servulus is possible.
9
Yazaki, Yoshikazu. "Utilization of Flavonoid Compounds from Bark and Wood: A Review". Natural Product Communications 10, n.º 3 (março de 2015): 1934578X1501000. http://dx.doi.org/10.1177/1934578x1501000333.
Texto completo da fonteResumo:
Flavonoid compounds, which are extracted from bark and wood and used commercially, are flavan 3-ols as monomers and their polymers, which are called “condensed tannins”. Reactions of the condensed tannins with formaldehyde are the basis for wood adhesives. In the late 1940s, tannin research for wood adhesives was begun and the world-first commercial use of wattle tannin from black wattle ( Acacia mearnsii) bark as wood adhesives occurred in Australia in the 1960s. In addition, wattle tannin-based adhesives were further developed in South Africa and the uses of these adhesives have been continuing to date. The success of wattle tannin in wood adhesives is demonstrated by the collaboration of the ACIAR with the CAF in the early 1990s. Although radiata pine bark ( Pinus radiata) could be a useful resource for the production of wood adhesives, three problems prevented its use in this application: low extractive yields from the bark, variable quality of the tannin extracts and excessive viscosity of the formulated tannin adhesives. In order to overcome these problems, various extraction methods have been proposed. Studies on tannin adhesives from bark of other pine species are also described. Furthermore, the use of the tannin in the bark without extraction is described as “bark adhesives” from radiata pine and black wattle. The use of radiata tannin without formaldehyde for moulded wood products is also described. Owing to the strong antioxidant activity of flavonoid compounds, bark extracts from French maritime pine ( Pinus pinaster, synonym P. maritima) and radiata pine have been commercialized as nutritional supplements: Pycnogenol and Enzogenol, respectively. The background and the development of Pycnogenol and the basic difference in the preparation processes between Pycnogenol and Enzogenol are described. On the basis of the discovery that the SOSA value for wattle tannin is approximately 10 times that of extracts from pine bark supplements (Pycnogenol and Enzogenol), chemical, biochemical and clinical studies on wattle tannin were conducted. Results from these studies are outlined. Wattle tannin has been developed as a nutritional supplement and marketed as Acapolia in Japan.
10
Beck, S. L., e A. Fossey. "Gamma irradiation induces sterility or seedlessness in black wattle (Acacia mearnsii)". Seed Science and Technology 35, n.º 2 (1 de julho de 2007): 351–59. http://dx.doi.org/10.15258/sst.2007.35.2.10.
Texto completo da fonteTeses / dissertações sobre o assunto "Black wattle"
1
Beyers, Gregory John. "An experimental study of the effect of Acacia mearnsii (black wattle trees) on streamflow in the Sand River, Eastern Cape". Thesis, Rhodes University, 1999. http://hdl.handle.net/10962/d1005507.
Texto completo da fonteResumo:
This thesis explores the effect of Acacia mearnsii on streamflow in the Eastern Cape. There is a need for data on the localised effects of removing alien trees from the riparian zones within the Fynbos Biome. Fynbos catchments throughout the Western and Eastern Cape yield large quantities of good quality water which is an essential resource in the region. To convince local land owners to manage their riparian zones, small scale experimental results will prove invaluable to assure them of the immediate advantages for themselves and for downstream water users. Three permanent weirs were built 500 m apart to monitor the effect of removing A. mearnsii on streamflow in the Sand River, Eastern Cape. Consecutive weirs allowed for the comparison of streamflow between a cleared and uncleared section of the river without significant differences in riparian conditions, channel morphology and vegetation densities. A site survey confirmed comparable densities of A. mearnsii in both sections. A sample of trees was weighed and a relationship was found between diameter at breast height and above ground wet biomass. Between the first two weirs, 2.5 ha of riparian zone was cleared amounting to approximately 160tlha. Streamflow was monitored from the 10th of January 1996 to the 9th of September 1996. The average streamflow reduction for the duration of the experiment was 15.1 m³/ha/day or 551 mm per annum. Initially, after a period of above average rainfall, streamflow was augmented by discharge from the riparian zone but as conditions dried out, there was a net uptake of water with the highest average uptake of 23. 7m³/ha/day in June. A comparison between weather conditions and streamflow reduction indicated there is a complex relationship, with evidence of A. mearnsii exhibiting control of water loss during dry conditions. Acacia mearnsii trees in the riparian zone have been shown to cause significant streamflow reduction. Permanent weirs were found to be appropriate for this type of study. There is a need for further research on the effect of alien trees in riparian zones around South Africa as there is potential for significant increases in streamflow.
2
Müller, Ivanor. "AVALIAÇÃO DA PRODUTIVIDADE DA Acacia mearnsii De Wild. (Acácia negra) EM FUNÇÃO DE DIFERENTES ESPAÇAMENTOS". Universidade Federal de Santa Maria, 2006. http://repositorio.ufsm.br/handle/1/8348.
Texto completo da fonteResumo:
The black wattle (Acacia mearnsii De Wild.), it is constituted on second main forest essence planted in Rio Grande do Sul, just losing for the Eucalyptus. The culture of that species is of fundamental importance for the tannin industries, foils and cellulose in the state, front to the good results economical coming of the exploration of the same, because the peel is sold for the extraction of tannins and the wood is marketed for conversion in cellulose, foils and energy. The black wattle has been considered as one of the main planting alternatives in the agricultural area of the state. In the present work, it was studied the productivity of the Acacia mearnsii De Wild. (black wattle) in function of different spacings, with initial base of one thousand hundred sixty trees, distributed in five treatments and three repetitions, originated of research developed jointly among the Empresa SETA (Sociedade Extrativa de Tanino de Acácia Ltda.) and the Centro de Pesquisas Florestais (Cepef) of Universidade Federal de Santa Maria (Santa Maria-RS), in the district of Capão Comprido belonging to the municipal district of Butiá-RS, in area of the company. The company uses a spacing of 3,0 m x 1,33 m in their plantings, for accomplishing them with machine, however the results obtained in the test d.m.s. they point that for the united analysis of the treatments analyzed in the period from 2002 to 2004, the volumetric average of the treatment
5 differs statisticaly of all the other ones; the treatments 1, 4 and 3 don't differ statisticaly amongst themselves and the treatment 2 differs statisticaly of all the other ones at the level of significance of 5%, being concluded the treatment 5 as soon as (3,0 m x 2,50 m) it
is the most suitable for the planting of the black wattle (Acacia mearnsii De Wild.), tends in view the largest volumetric average. In the aspect regarding the analyzed period, the results obtained in the test d.m.s. they appear that so much for the analysis individual as united of the treatments, the three years-old volumetric averages differ statisticaly amongst themselves at the level of significance of 5%, and the year of 2004 in all of the treatments presented the largest volumetric averageA acácia negra (Acacia mearnsii De Wild.), constitui-se na segunda principal essência florestal plantada no Rio Grande do Sul, perdendo apenas para o Eucalipto. A cultura dessa espécie é de fundamental importância para as indústrias de tanino, chapas e celulose no Estado, frente aos bons resultados econômicos advindos da exploração da mesma, pois a casca é vendida para a extração de taninos e a madeira é comercializada para conversão em celulose, chapas e energia. A acácia negra tem sido considerada como uma das principais alternativas de plantio na área agrícola do Estado. No presente trabalho, foi estudada a produtividade da Acacia mearnsii De Wild. (acácia negra) em função de diferentes espaçamentos, com base inicial de hum mil cento e sessenta árvores, distribuídas em cinco tratamentos e três repetições, originadas de pesquisa desenvolvida conjuntamente entre a Empresa SETA (Sociedade Extrativa de Tanino de Acácia Ltda.) e o Centro de Pesquisas Florestais (Cepef) da Universidade Federal de Santa Maria (Santa Maria RS), no distrito de Capão Comprido pertencente ao município de Butiá-RS, em área da Empresa. A empresa utiliza um espaçamento de 3,0 m x 1,33 m em seus plantios, por realizá-los com máquina, no entanto os resultados obtidos no teste d.m.s. apontam que pela análise conjunta dos tratamentos analisados no período de 2002 a 2004, a média volumétrica do tratamento 5 difere estatisticamente de todos os outros; os tratamentos 1, 4 e 3 não diferem estatisticamente entre si e o tratamento 2 difere estatisticamente de todos os outros ao nível de significância de 5%, concluindo-se assim que o tratamento 5 (3,0 m x 2,50 m) é o mais indicado para o plantio da acácia negra (Acacia mearnsii De Wild.), tendo em vista a maior média volumétrica. No aspecto referente ao período analisado, os resultados obtidos no teste d.m.s. apontam que tanto pela análise individual quanto conjunta dos tratamentos, as médias volumétricas dos três anos diferem estatisticamente entre si ao nível de significância de 5%, sendo que o ano de 2004 em todos os tratamentos apresentou a maior média volumétrica
3
Soares, Gustavo Martins. "Dinâmica do crescimento em plantios mistos de Eucalyptus globulus e Acacia mearnsii". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/11/11150/tde-06012016-174312/.
Texto completo da fonteResumo:
O objetivo deste estudo foi avaliar a dinâmica do crescimento em consórcios de Eucalyptus globulus e Acacia mearnsii e suas interações. O experimento foi instalado no ano de 2005, em duas fazendas localizadas no município de Piratini - RS, onde foram plantadas as espécies Eucalyptus globulus (E) e Acacia mearnsii (A), em monocultivo (100%E e 100%A) e consorciadas em linhas simples (50%E:50%A - LS) e em linhas duplas (50%E:50%A - LD). Para avaliarmos os efeitos dos consórcios no crescimento das espécies, os tratamentos foram analisados nos anos de 2006, 2007, 2008, 2010 e 2013; no ano de 2014 foi realizada a cubagem pelo método de Smalian e a determinação da biomassa de folhas, galhos, lenho e total e do índice de área foliar (IAF) pelo método destrutivo. A classificação da capacidade produtiva das espécies foi realizada pelo método da curva-guia em função da altura dominante (Hd) e idade. Foram testados três diferentes modelos de crescimento, seis modelos de equações hipsométricas e o modelo de Clutter para a estimação e predição da produtividade por unidade de área. Além disso, foi realizada a modelagem da distribuição diamétrica a partir da estimação dos parâmetros da função densidade de probabilidade (f.d.p.) Weibull de dois parâmetros e testado o emprego das redes neurais artificiais (RNA) para a estimação da altura. A acácia-negra teve seu crescimento em altura beneficiado pelo consórcio, já para o eucalipto não foi possível observar vantagens no crescimento em altura. O DAP para ambas espécies foi influenciado pelos consórcios, positivamente para a acácia-negra e negativamente para o eucalipto, diferenças que são explicadas pelas variações dos espaçamentos proporcionadas ao se manter o espaçamento convencional de plantio das espécies nos tratamentos consorciados. O volume individual teve alta correlação com o DAP (0,92). A produtividade da acácia-negra nos consórcios foi superior a 50% a da monocultura, o que não ocorreu para o eucalipto. As produtividades totais dos consórcios foram iguais estatisticamente as das monoculturas. Os sistemas consorciados foram eficazes em diminuir a mortalidade da acácia-negra. Quando analisada a compartimentalização da biomassa individual acima do solo e o IAF, não foram encontradas diferenças significativas entre os modelos de consórcio e as monoculturas. A classificação da capacidade produtiva das espécies pelo método da curva-guia mostrou-se eficiente, sendo capaz de classificar os tratamentos em diferentes sítios de produção, demonstrando a relação das variáveis do povoamento com a capacidade produtiva dos locais. O único modelo, de crescimento e de relação hipsométrica, que foi capaz de estimar as variáveis com precisão foi o de Chapman-Richards e o H∼∫ (DAP, Hd, AS, Idade), respectivamente. O modelo de Clutter foi indicado tanto para os modelos de consórcio quanto para os monocultivos. A f.d.p. Weibull de dois parâmetros captou de forma precisa a distribuição dos diâmetros e o sistema de equações proposto para a recuperação dessa distribuição pode ser empregado nas diferentes situações de manejo testadas. As RNA possuem potencial de uso para a estimação da altura em monocultivos de eucalipto e acácia-negra, bem como nos consórcios entre essas espécies, gerando estimativas precisas e com pequena tendenciosidade.The objective of this study was to evaluate the growth dynamics in a mixed-species plantations of Eucalyptus globulus and Acacia mearnsii and their interactions. The experiment was installed in 2005, on two farms in municipality of Piratini - RS, where was planted the species Eucalyptus globulus (E) and Acacia mearnsii (A), in monoculture and mixed in simple lines (50%E:50%A - LS) and double lines (50%E:50%A - LD). To evaluate the effects of mixed-plantings in the growth of the species, the treatments was analysed in 2006, 2007, 2008, 2010 and 2013; in 2014 was realized the volume evaluation by the Smalian method and the determining of the biomass of leaves, twigs, wood and total and the leaf area index (LAI) by the destructive method. The site index of each species was realized by the guide-curve method in function of the dominant height (Hd) and ages. Three different growth models, six different height-diameter models and the Clutter model to estimate and predict the productivity per unit area, were tested. Moreover, modeling the diametric distribution as of the estimation of the parameters of the probability density function two parameters Weibull and the use of the artificial neural network (ANN) for the height estimate was tested. The black wattle had their height growth benefited for the mixed-plantations, for eucalyptus was not observed advantages in height growth. The DBH was influenced by the mixed-plantings for both species, positively to the black wattle and negatively for eucalyptus, differences that are explained by variations in spacing provided to keep the conventional spacing of planting the species in the intercropping treatments. The individual volume had high correlation with DBH (0,92). The productivity of black wattle in the mixed-plantings was higher than 50% of monoculture, which did not occur for eucalyptus. The total productivity of mixed-plantings were statistically equal the monocultures. Mixed-plantings were effective in reducing mortality of black wattle. When analyzing the compartmentalization of the individual aboveground biomass and the IAF, there were no significant differences between the mixedplantings models and monocultures. The site index classification of the species using the guide-curve method was effective, being able to classify out the treatments at different production indexes, showing the relation between the stand variables and productive capacity of local. The only model of growth and height-diameter ratio, which was able to estimate the variables with accuracy was the Chapman-Richards and H∼∫(DBH, Hd, AS, Age), respectively. The Clutter model was indicated both for the models of mixed-plantings as for the monocultures. The probability density function two parameters Weibull represented accurately the distribution of diameters and the system of equations proposed for the recovery of this distribution can be used in different management situations tested. The ANN have potential use for the estimation of height in eucalyptus and black wattle monocultures and in mixed-plantations with these species, with accurate and little bias estimates.
4
Ono, Maria Angélica. "Dinâmica de infestação em Acacia mearnsii e ecologia de Oncideres impluviata (Coleoptera: Cerambycidae)". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/11/11146/tde-13112015-165903/.
Texto completo da fonteResumo:
Neste estudo a dinâmica de quebra de galhos de acácia negra foi investigada com análise de séries temporais e modelagem ecológica, em conjunto de dados obtidos durante oito anos, visando compreender como se dá o comportamento de Oncideres impluviata (Colepotera, Cerambycidae) em diferentes áreas de plantios florestais, em fazendas localizadas em diferentes municípios do Rio Grande do Sul. A diversidade de cerambicídeos também foi analisada em duas fazendas localizadas no município de maior abundancia de O. impluviata. Os resultados sugerem que a maior abundância de galhos quebrados se dá em Cristal e Encruzilhada do Sul. O município de Piratini exibiu menor densidade de galhos quebrados, entretanto, a projeção dos valores médios de galhos seguiu um padrão aparentemente exponencial para Cristal e Encruzilhada do Sul e sigmóide para Piratini. As funções de autocorrelação e autocorrelação parcial não evidenciaram claras tendências de ciclos nas séries para os três municípios, mas as tendências de ocorrência de picos similares aos surtos diferiram nos três municípios quando a análise espectral foi aplicada. A dinâmica analisada pela equação de Ricker indicou a ocorrência de equilíbrio estável, ciclo limite e comportamento caótico nos três municípios, porém, com menor prevalência de caos em Piratini. A migração espacial mostrou maior poder de estabilização populacional em Cristal e Encruzilhada do Sul em razão das maiores taxas de crescimento presentes nestes municípios. Quinze espécies de cerambicídeos foram encontradas em duas fazendas pertencentes ao município de Encruzilhada do Sul e Oncideres impluviata, Nesozineus alphoides e Ygapema delicata foram as espécies de cerambicídeos mais abundante nas áreas analisadas. As curvas de rarefação atingiram assíntotas de forma satisfatória, comprovando a suficiência do esforço amostral.In this study, the dynamics of black wattle broken branches was investigated with time series analysis and ecological modeling in dataset obtained during eight years, in order to understand how O. impluviata (Coleoptera, Cerambycidae) behaves in different forests placed in farms of different municipalities of the Rio Grande do Sul, Brazil. The diversity of cerambycids wal also analysed in two farms placed in the municipality with the highest abundance of O. impluviata. The results suggest that higher abundance of broken branches occurs in Cristal and Encruzilhada do Sul. Piratini exhibited the lowest density of broken branches, however, the projection of mean values of branches followed an apparently exponential pattern in Cristal and Encruzilhada do Sul and sigmoid in Piratini. The autocorrelation and partial autocorrelation functions did not show clear trends of cycles in the series of the three municipalities, but the peak occurrence trends similar to the outbreaks differed in the three municipalities when the spectral analysis was applied. The dynamics analysed with the Ricker equation indicated stable equilibrium, limit cycle and chaos in the three municipalities, but, with lower prevalence in Piratini. The spatial migration showed higher power to stabilize population in Cristal and Encruzilhada do Sul in response to high growth rates in these municipalities. Fifteen species of cerambycids were found in the two farms in Encruzilhada do Sul and O. impluviata, Nesozineus alphoides and Ygapema delicate were the most abundant species in the areas. The rarefaction curves showed satisfactory asymptotes, confirming the adequacy of the sampling effort.
5
Linhares, Felipe de Aguiar de. "Avaliação fluidodinâmica e processo de co-combustão de resíduo de casca de acácia negra com carvão mineral em planta piloto de leito fluidizado borbulhante". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/156803.
Texto completo da fonteResumo:
A preservação ambiental e o uso de combustíveis fósseis para geração de energia têm estimulado a realização de pesquisas na busca de alternativas para a redução das emissões de gases poluentes como CO2, CO, SO2 e NOx. O uso da biomassa em sistemas de co-combustão em leito fluidizado é mencionado como uma destas alternativas. O presente trabalho utilizou biomassa residual da indústria de extração de tanino, o Resíduo de Cascas de Acácia Negra (RCAN), em conjunto com carvão mineral da Mina de Candiota – RS com o objetivo de estudar a fluidodinâmica entre diferentes composições destes materiais em sistema de leito fluidizado com areia em escala de laboratório e em uma unidade piloto. Também foi realizada a avaliação dos parâmetros operacionais e das emissões dos gases gerados na co-combustão das misturas em planta piloto com reator de leito fluidizado borbulhante. Durante a fluidização no sistema de escala laboratorial, os valores da velocidade mínima de fluidização, Umf, variaram consideravelmente com o aumento da concentração de RCAN no leito em relação à fluidização utilizando-se somente o carvão mineral Da mesma forma, a queda de pressão, ΔP, diminuiu com o aumento da concentração da biomassa no leito. Nas operações de co-combustão em planta piloto, as misturas de carvão mineral e RCAN necessitaram de menores porcentagens de excesso de ar (99,7% a 65,2%) no reator em comparação à queima apenas de carvão mineral (108,4% a 107,5%) para que se atingisse a temperatura de operação do leito. Em particular, a condição de maior quantidade de biomassa na alimentação pode se observar a menor porcentagem de excesso de ar (50,8%). Ainda, a co-combustão do RCAN com carvão mineral favoreceu a diminuição das concentrações de SO2 nos gases gerados em mais de 90%, mantendo as emissões em níveis aceitáveis conforme os limites de emissão estabelecidos pela resolução CONAMA Nº 436, de 22/12/2011 e Resolução SEMA Nº 016 de 2014.The environmental issues brought by the use of fossil fuels for power generation have led to the development of research in the exploration for alternatives to reduce emissions of greenhouse gases or pollutants such as CO2, CO, SO2, and NOx. The biomass use in cofiring systems with fluidized bed has been mentioned as one of these alternatives. The present work used biomass waste from tannin extraction industry, Black Wattle Bark Waste (BWBW), jointly with coal for the purpose of studying the fluid dynamics biomass mixtures with coal and sand in different proportions of the materials in laboratory scale fluidized bed system. Also, operational parameters and emissions generated in a cofiring pilot plant with bubbling fluidized bed reactor were evaluated. The fluidization tests performed on a bench scale showed that the values of the minimum fluidization velocity, Umf, varied considerably with increasing concentration of BWBW compared with the fluidization of coal. Likewise, the pressure drop through the bed, ΔP, decreased with increasing concentration of biomass in the bed. In the cofiring operations, coal and mixtures BWBW required smaller percentages of excess air in the reactor (99,7% a 65,2%) in comparison with the pure coal (108,4% a 107,5%) burning to obtaining the bed operating temperature. The burning of the mixture with higher amounts of biomass in the reactor feed had the lowest percentage of excess air (50.8%). It was also evidenced a decrease of SO2 generation in more than 90% for the flue gas generated in the coal with BWBW cofiring keeping emissions at acceptable levels in comparison with emission limits of current legislation CONAMA Nº 436, from 22/12/2011 and legislation SEMA Nº 016 of 2014.
6
Barbosa, Joao Carlos de Mello. "Utiliza??o de tanino e derivados ligno-celul?sicos na prepara??o de areias de fundi??o e briquetes de res?duos vegetais". Universidade Federal Rural do Rio de Janeiro, 2009. https://tede.ufrrj.br/jspui/handle/tede/482.
Texto completo da fonteResumo:
Made available in DSpace on 2016-04-28T14:56:19Z (GMT). No. of bitstreams: 1
2009 - Joao Carlos de Mello Barbosa.pdf: 368412 bytes, checksum: 5ae0ef2040832998eb804e8b2b0fd642 (MD5)
Previous issue date: 2009-01-13The general goal of this work is to evaluate the possibility of utilizing tannin from black wattle and lignocelullosic derivatives in the preparation of foundry sand, as well as to evaluate the utilization of tannins as glueing for the confection of briquettes of vegetal residues. The work has been divided into two chapters, which comprise distinct experiments. In the first chapter tannin and cellulignin were used as constituents of foundry sand for the fabrication of pieces of pure aluminum alloy or aluminum-silicon eutectic alloy (11,0 a 13,0 % of Si). In the second chapter the use of tannin was evaluated in the production of briquettes of vegetal residues for application as a source of energy. The traces of foundry sand normally use clay as glueing and mogul (corn starch) with the goal of enhancing the resistance to compression and workability of the mold thus produced. It is common practice the use of mineral coal as a reducing agent in the mixture, and so the effects of its substitution by cellulignin, because of its high carbon content, were evaluated. Tannin, for its adhesive properties, acted as glueing together with clay, and replaced molasses, which is a component of foundry sand, perfectly. The resistance analysis produced good results and the process will generate molds with good visual aspect and adequate mechanical properties. Sawdust obtained in a eucalyptusprocessing sawmill was used in the confection of the briquettes. Tannin demonstrated great affinity to water in the composition of the standard mixture for briquetting. In natura sawdust, without any beneficiation, was used for briquetting. The results revealed that tannin is effective in the production of briquettes, where acted as an element of adhesion between the sawdust particles.
O objetivo geral deste trabalho foi avaliar a possibilidade de utiliza??o de tanino de ac?cia negra e de derivados lignocelul?sicos na prepara??o de areias de fundi??o, bem, como avaliar a utiliza??o dos taninos como aglomerante para confec??o de briquetes de res?duos vegetais. O trabalho foi dividido em dois cap?tulos, constituindo experimentos distintos. No primeiro cap?tulo foram utilizados o tanino e a celulignina como constituintes de areia preparadas de fundi??o para a fabrica??o de pe?as em ligas de alum?nio puro ou alum?nio-sil?cio eut?tica (11,0 a 13,0 % de Si). No segundo cap?tulo, avaliou-se a utiliza??o do tanino na obten??o de briquetes de res?duos vegetais para aplica??o como fonte de energia. Os tra?os de areia preparada de fundi??o normalmente usam a argila como aglomerante e o mogul (amido de milho) com a finalidade de melhorar a resist?ncia ? compress?o da areia e a trabalhabilidade do molde produzido. ? pr?tica comum a utiliza??o do carv?o mineral como elemento redutor na mistura, e assim, foram avaliados os efeitos de sua substitui??o pela celulignina, em fun??o do seu teor elevado de carbono. O tanino, por suas propriedades adesivas, atuou como aglomerante em parceria com a argila, e ainda substituiu perfeitamente o mela?o, que ? um componente da areia preparada de Fundi??o, obtendo-se bons resultados na an?lise das resist?ncias, gerando moldes de bom aspecto visual e propriedades mec?nicas adequadas. Na confec??o dos briquetes, foi utilizada serragem obtida em serraria que processa madeira de eucalipto. O tanino demonstrou grande afinidade com a ?gua na composi??o da mistura padr?o para a briquetagem. Na briquetagem, foi utilizada a serragem in natura, sem qualquer tipo de beneficiamento. Os resultados revelaram que o tanino mostrou-se efetivo na fabrica??o de briquetes, onde atuou como elemento de ades?o entre as part?culas de serragem.
7
Finger, Anelisa Pedroso. "DIAGRAMAS DE MANEJO DA DENSIDADE PARA POVOAMENTOS DE Acacia mearnsii De Wild". Universidade Federal de Santa Maria, 2016. http://repositorio.ufsm.br/handle/1/8785.
Texto completo da fonteResumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorDensity management diagrams (DMD) is a tool used to carry out the prognosis of production in density, basal area and volume in order to establish management strategies for forest planning. The aim was to build a density management diagram for Acacia mearnsii De Wild. Data from 12 cities in the northeastern region of Rio Grande do Sul were used for the DMD construction. Since the Tang model had the best evaluation, it was used to select the maximum population density estimative, thus the density 1x1 was used to construction of the DMD. With the same model, self-thinning graphs and Stand Density Index (SDI) were generated; adopting a standard quadratic mean diameter of 10cm. Density levels were determined proportionally to SDI maximum density in 200 class intervals, with higher 2400 and lower 1400 SDI. The DMD were produced with an average diameter and density control, and volume and green rind bark weight per hectare. A second DMD model was developed in order to insert a site production control through the dominant height of the stand. These DMD models allowed estimating the volume and green rind bark with great precision, from the control of diameter, density and dominant height.
O Diagrama de Manejo da Densidade (DMD) é uma ferramenta utilizada para realizar a prognose da produção em densidade, área basal e volume a fim de estabelecer estratégias de manejo para o planejamento florestal. O objetivo do presente foi construir um diagrama de manejo da densidade para Acacia mearnsii De Wild., com dados dendrométricos provenientes de 12 municípios da região nordeste do Rio Grande do Sul. A máxima densidade populacional foi estimada pelo modelo de Tang, ajustado com dados de parcelas em espaçamento 1x1m. Com este modelo foram gerados os gráficos de autodesbaste e Índices de Densidade de Povoamento (IDP) para um diâmetro padrão de 10cm. Os níveis de densidade foram determinados, proporcionalmente, a partir da máxima densidade, por índice de densidade de povoamento (IDP), em intervalos de classe de 200, com IDP máximo 2400 e mínimo 1400. Os DMDs foram elaborados com controle de diâmetro médio e densidade populacional, e como variável de resposta o volume por hectare e o peso de casca verde por hectare. Um segundo modelo de DMD foi elaborado com o objetivo de inserir um controle produtivo dos sítios, através da altura dominante do povoamento. Estes modelos de DMD permitiram estimar o volume e peso de casca verde com ótima precisão, a partir do controle do desenvolvimento do diâmetro, densidade e altura dominante.
8
Oliveira, Leonardo da Silva. "Aspectos entomológicos em povoamentos homogêneos de Acacia mearnsii de Wild". Universidade Federal de Santa Maria, 2007. http://repositorio.ufsm.br/handle/1/3705.
Texto completo da fonteResumo:
Conselho Nacional de Desenvolvimento Científico e TecnológicoThe proposed work aimed to investigate the entomological aspects in homogeneous stands of Acacia mearnsii (black wattle). It was considered: insects identification and damage quantification on seeds; treatment effect of seeds and the insecticides application on the aerial part of plants of direct sowing; the survey qualiquantitative by light traps mean; the main species of Coleoptera present in the suppressed trees; the attack characterization of Oncideres impluviata and its influence on wood volume of black wattle. The experiments were carried out in cultivated areas of black wattle situated at the municipality of Butiá and Minas do Leão in the carboniferous region of Rio Grande do Sul during March 2004 to July 2006. It was verified that the Stator limbatus (Coleoptera: Chrysomelidae) caused expressive damage to the black wattle seeds. There was no statistical increase in relation to the use of insecticides to the directly sowing, however black wattle plants submitted to thiamethoxam application on the aerial part showed better development. Among the 11 orders collected by light traps the populations of lepidoptera, coleoptera and hemiptera were quantitatively pointed. Sigara sp. (Hemiptera: Corixidae), Conoderus alfredense (Coleoptera: Elateridae) and Plectris crassa (Coleoptera: Scarabaeidae) were the species more frequents, abundant and constants collected by the light traps. At the qualitative survey made in suppressed trees it was observed 40 species of Coleoptera distributed in ten families, focusing in Curculionidae with twelve representatives, Cerambycidae with ten and Scarabaeidae with nine species. It was verified that O. impluviata attacks the high parts of the tree, independent of age, from the borders into the stand and cuts the branches averaging 14mm of diameter and 1.4 m of length. These branches present high contents of nitrogen and phosphorus in their chemical composition when compared to non-cut branches. The attack of O. impluviata did not reduce the wood volume produced for black wattle trees.
O trabalho proposto teve como objetivo o estudo de aspectos entomológicos em povoamentos homogêneos de Acacia mearnsii (acácia-negra), considerando a identificação de insetos e quantificação de seus danos em sementes; o efeito do tratamento de sementes e a aplicação de inseticidas na parte aérea de plantas de semeadura direta; o levantamento quali-quantitativo, por meio de armadilha luminosa; as principais espécies de Coleoptera presentes em sub-bosque; a caracterização do ataque de Oncideres impluviata e a sua influência no volume de madeira de acácia-negra. Os experimentos foram realizados em áreas de plantio e povoamentos de acácia-negra situados nos municípios de Arroio dos Ratos, Butiá e Minas do Leão, na região carbonífera do Rio Grande do Sul, no período de março de 2004 a julho de 2006. Verificou-se que Stator limbatus (Coleoptera: Chrysomelidae) causa expressivos danos a sementes de acácia-negra. Não houve diferença significativa em relação ao uso de inseticidas para a semeadura direta. Das 11 ordens coletadas por meio de armadilha luminosa, destacam-se quantitativamente as populações de lepidópteros, coleópteros e hemípteros. Sigara sp. (Hemiptera: Corixidae), Conoderus alfredense (Coleoptera: Elateridae) e Plectris crassa (Coleoptera: Scarabaeidae) foram as espécies muito freqüentes, muito abundantes e constantes, coletadas através de armadilha luminosa. No levantamento qualitativo realizado em sub-bosques foram observadas 40 espécies de Coleoptera, distribuídas em dez famílias, com destaque para os Curculionidae com doze representantes, Cerambycidae com dez e Scarabaeidae com nove espécies. Constatou-se que O. impluviata ataca nas partes mais altas da árvore, independente da idade, tanto nas bordas como no interior de povoamentos. O. impluviata anela galhos com diâmetros e comprimentos médios de 1,4 cm e 1,4 m, respectivamente. Estes galhos apresentam maiores teores de nitrogênio e fósforo em sua composição química quando comparados com galhos não-anelados. O ataque de O. impluviata não reduziu o volume de madeira produzido por árvores de acácia-negra.
9
Giesbrecht, Bruna Mohr. "Caracterização tecnológica da madeira de Acacia mearnsii De Wild. para a produção de polpa celulósica Kraft". Universidade Federal de Santa Maria, 2017. http://repositorio.ufsm.br/handle/1/12855.
Texto completo da fonteResumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESThe Acacia mearnsii De Wild. is widely cultivate for the tannin extraction of its bark, while the wood, exported to the Asian countries, can be converted in cellulosic pulp. Although the efficiency of this wood on pulping is proved, in Brazil the specie is rarely used for this purpose. Thus, the aim of this work was to characterize technologically the Acacia mearnsii wood, trough chemical, anatomical and basic density analysis, and evaluate the cellulosic pulp quality, produced by the kraft process. It was collected ten trees, five from a seed production area (APS) and five from clonal plantations, which were felled and divided in discs and prepared in accordance with TAPPI T264 om-88 standart. The basic density was performed in accordance with NBR 11941 (2003) standart, and the wood description was set trough the preparation of histological slides and of macerated, according to Burger and Richter (1991) and by the nitric-acetic method, respectively, followed by anatomical measurements on microscope. It was performed quantitative analysis of the chemical components, besides the syringyl/guaiacyl ratio and the total carbohydrates content by high efficiency liquid chromatography. The kraft pulps were carried out only in APS chips, keeping constant the time, sulfidity and the temperature of cooking, changing just the active alkali charge, which ranged from 14 to 24%. In cellulosic pulps, it was evaluated the yields, kappa number and rejects content, besides the analysis of solid content in black liquor. The basic density results showed that Acacia mearnsii wood from APS and clones did not presented significant difference, with values of, approximately 0,544g/cm³. In wood description, the anatomical elements presented values much similar to the genre Eucalyptus sp., with thin to thick wall fibers (± 3,3 μm) and anatomical indices indicating suitable fibers for paper production. The chemical analysis revealed an ashes content of, approximately 0,35%, total extractives of 4,5 to 4,8%, Klason lignin of 16,2 to 17,1%, holocellulose and alpha-cellulose of 76 to 77% and 46%, respectively. The glucose content was 51,7 and 49,7% for clone and APS, while the hemicelluloses (xylose, arabinose, mannose and galactose) totaled circa 19%. The S/G ratio was 2,69 and 2,93 in clone and APS, respectively. The pulps made with different charges of active alkali presented satisfatory yields and kappa numbers. The best pulping condition was obtained with active alkali of 14%, resulting in a screened yield of nearly 57%, kappa number of 16, rejects content of ± 0,2% and solids content of 12,7%. According with the results, the Acacia mearnsii wood presents a great potential as a source of short fibers in cellulosic pulp production.
A Acacia mearnsii De Wild. é amplamente cultivada para a extração de tanino de sua casca, enquanto que sua madeira, exportada para países asiáticos, pode ser convertida em polpa celulósica. Embora existam estudos que comprovem sua eficiência na polpação, no Brasil a espécie é pouco utilizada para este fim. Desta forma, o objetivo deste trabalho foi caracterizar tecnologicamente a madeira de Acacia mearnsii, através de análises químicas, anatômicas e de densidade básica, e avaliar a qualidade de sua polpa celulósica, produzida pelo processo kraft. Foram coletadas dez árvores, cinco provenientes de área de produção de sementes (APS) e cinco clones, que foram abatidas, seccionadas em discos e preparadas em amostras conforme a norma TAPPI T264 om-88. A densidade básica foi obtida de acordo com a norma NBR 11941 (2003), e a descrição do lenho foi determinada através da preparação de lâminas histológicas e de macerado conforme Burger e Richter (1991) e pelo método nítrico-acético, respectivamente, seguidas de medições anatômicas em microscópio. Foram realizadas análises químicas quantitativas, além da relação siringil/guaiacil e o teor de carboidratos totais por cromatografia líquida de alta eficiência. Os cozimentos kraft foram realizados somente em cavacos de APS, mantendo-se constantes o tempo, a sulfidez e a temperatura, alterando apenas a carga de álcali ativo, que variou de 14 a 24%. Nas polpas celulósicas foram avaliados os rendimentos, o número kappa e o teor de rejeitos, além da análise de sólidos dissolvidos no licor negro. Os resultados de densidade básica mostram que a madeira de Acacia mearnsii de APS e clone não apresentam diferença significativa, com valor de aproximadamente 0,544 g/cm³. Com relação a descrição do lenho, os elementos anatômicos apresentaram valores muito próximos ao gênero Eucalyptus sp., com fibras de paredes finas (de ± 3,3 μm) e índices anatômicos indicando fibras adequadas para a produção de papéis. As análises químicas revelaram um teor de cinzas de aproximadamente 0,35%, extrativos totais de 4,5 a 4,8%, lignina Klason de 16,2 a 17,1%, holocelulose e alfa-celulose de 76 a 77% e 46%, respectivamente. O teor de glicose foi de 51,7 e 49,7% para clone e APS, enquanto que as hemiceluloses (xilose, arabinose, manose e galactose) somaram aproximadamente 19%. A relação S/G foi de 2,69 e 2,93 em clone e APS, respectivamente. As polpas produzidas com diferentes cargas de álcali ativo apresentaram rendimentos e número kappa satisfatórios. A melhor condição de polpação foi obtida com álcali ativo de 14%, resultando em um rendimento depurado de aproximadamente 57%, número kappa de 16, teor de rejeitos de ± 0,2% e teor de sólidos de 12,7%, valores utilizados pelas indústrias de celulose. De acordo com os resultados, a madeira de Acacia mearnsii apresenta grande potencial como fonte de fibras curtas na obtenção de polpa celulósica.
10
Alves, Gilberto Demari. "Escarificação mecânica com areia para superação de dormência em sementes de acácia-negra (Acacia mearnsii De Wild.)". Universidade Federal de Pelotas, 2008. http://repositorio.ufpel.edu.br/handle/ri/1467.
Texto completo da fonteResumo:
Made available in DSpace on 2014-08-20T13:44:41Z (GMT). No. of bitstreams: 1
tese_gilberto_alves.pdf: 5811235 bytes, checksum: 79599512dd0f6a38e1c722c6d54e659a (MD5)
Previous issue date: 2008-08-26The black wattle (Acacia mearnsii De Wild.) is, the third forest specie of larger economical importance, more than 189 thousand ha are cultivated now, in Rio Grande do Sul, Brazil. According its socio-environmental importance it can be considerate the first in importancy in this state regarding the enormous benefits given to the black-wattle grower and to the environment, such as: regenerator of degraded soils specie; short life pioneering specie; quickly covering the soil; not presenting stump sprouting; it doesn't inhibit the local succession and the high deposition of their nitrogen rich leaves, cause the enriching of the soil. Black wattle has also the capacity of making symbiosis with microorganisms fixatives of atmospheric nitrogen. Producing quality wood for energy and cellulose; the tannin extracted from its peel is used for leather curing industry and in wines and beers clarification. More or less 60% of black wattle growers are of small producers, about 40 thousand families live from that activity. One of the limiting factors in the uniformity of the black-wattle's seedlings production is the low of quality of their seeds. The quality of the seedlings and the forest produced by them will depend on the dormancy and on the method used for its break. With the objective of accelerating and standardization of the germination in the process of seedlings production, we went after an alternative method that should be more practical and efficient, in the break of black-wattle s seed dormancy. To reach these objectives the mechanical scarification method was tested, using sand to polish as scarificant material and the model GDA-8 escarificator. This GDA-8 scarificator was developed as part of the research project during Post Graduation Program in Science and Technology of Seeds of FAEM (Faculdade de Agronomia Eliseu Maciel) / UFPEL, by comparing it to the conventional method that uses hot water. The black-wattle seeds used in this research are originated from trees that were three, four, five and six years old, in Joca Tavares district in Bagé / RS. Scarification was made using the following proportion: one part of seeds was used to three parts of sand with thin granularity average of 0,75 mm, for 1 1/2 minute. Mechanical damage, germination, first counting and weight of green and dry matter tests were developed, in the Laboratory of Analysis of Seeds of FAEM and Emergency and Emergency Velocity Index (IVG) in the vegetation home of Votorantim Cellulose and Paper s dependences, located in Capão do Leão/RS municipal district. The random experimental work was with three repetitions and the averages compared by the test of Tukey at the level of 5%.
A acácia negra (Acacia mearnsii De Wild.) é a terceira espécie florestal de maior importância econômica para o RS, no qual são cultivados mais de 189 mil ha atualmente. Considerando-se a importância sócio-ambiental, é a primeira neste estado, haja vista os enormes benefícios auferidos pelos acacicultores e ao meio ambiente, como: espécie recuperadora de solos degradados, espécie pioneira de vida curta, que cobre rapidamente o solo, não apresenta rebrota de cepa, não inibe a sucessão local e enriquece o solo pela elevada deposição de folhedo rico em nitrogênio. Também tem capacidade de efetuar simbiose com microrganismos fixadores de nitrogênio atmosférico. Produz madeira de qualidade para energia e celulose, de sua casca é extraído o tanino usado na indústria, desde o curtimento de couros, até clarificação de vinhos e cervejas. Cerca de 60 % dos acacicultores, da região produtora, são pequenos produtores, e 40 mil famílias vivem dessa atividade. Um dos fatores limitantes na produção de mudas uniformes de acácia negra é a baixa qualidade de suas sementes. Da dormência e do método utilizado para a sua superação, dependerá a qualidade das mudas e das florestas produzidas por estas sementes. Com o objetivo de acelerar e padronizar a germinação no processo de produção de mudas, buscou-se estudar um método alternativo que fosse prático e eficiente, na superação da dormência em sementes de acácia negra. Para alcançar estes objetivos, foi testado o método de escarificação mecânica, utilizando-se areia como material escarificante e, escarificador modelo GDA-8, concebido como parte do projeto de pesquisa desenvolvido durante o P.P.G. em Ciência e Tecnologia de Sementes da FAEM / UFPEL comparado ao método convencional que utiliza água quente. As sementes de acácia-negra, utilizadas nesse trabalho, foram provenientes de cultivos com três, quatro, cinco e seis anos, localizados no distrito de Joca Tavares em Bagé / RS. Para a escarificação, usou-se a proporção de uma parte de sementes para três de areia com granulometria fina, com média de 0,75 mm, durante um minuto e meio. Foram realizados testes de dano mecânico, germinação, primeira contagem e peso de matéria verde e seca, no Laboratório de Análise de Sementes da FAEM e Emergência e Índice de Velocidade de Emergência em casa de vegetação nas dependências da Votorantin Celulose e Papel, localizada no município de Capão do Leão / RS. O delineamento experimental foi o inteiramente casualisado, com três repetições e as médias comparadas pelo teste de Tukey ao nível de 5 %.
Livros sobre o assunto "Black wattle"
1
Parrotta, John A. Acacia auriculiformis A. Cunn. ex Benth =: Northern black wattle : Leguminosae (Mimosoideae) : legume family. Rio Piedras, PR]: U.S. Dept. of Agriculture, Forest Service, International Institute of Tropical Forestry, 1997.
Encontre o texto completo da fonte
2
Harris, Tony. Shrikes of southern Africa: True shrikes, helmet-shrikes, and bush-shrikes, including the batises and black-throated wattle-eye. Foreshore, Cape Town: Struik Winchester, 1988.
Encontre o texto completo da fonte
3
1674-1748, Watts Isaac, ed. Lining out the word: Dr. Watts hymn singing in the music of Black Americans. Berkeley: University of California Press, 2006.
Encontre o texto completo da fonte
4
Searle, S. Rise and Demise of the Black Wattle Bark Industry in Australia. CSIRO Publishing, 1991.
Encontre o texto completo da fonte
5
Library, Alexander Turnbull, ed. Black dawn to Wattle Grove: Australian fine printing and private press books, National Library Gallery, 1 December 1989-20 January 1990. [Wellington]: Alexander Turnbull Library, 1989.
Encontre o texto completo da fonte
6
Lutz, Norma Jean. J.C. Watts (Black Americans of Achievement). Chelsea House Publications, 2003.
Encontre o texto completo da fonte
7
Archer-Parré, Caroline, e Malcolm Dick, eds. James Watt (1736-1819). Liverpool University Press, 2020. http://dx.doi.org/10.3828/liverpool/9781789620818.001.0001.
Texto completo da fonteResumo:
James Watt (1736-1819) was a pivotal figure of the Enlightenment and Industrial Revolution. His career as a scientific instrument maker, inventor and engineer developed in Scotland, the land of birth. His prominence as a scientist, technologist and businessman was forged in the Birmingham area. His pumping and rotative steam engines represent the summit of technological achievement in the late-eighteenth and early-nineteenth centuries which led to future developments in locomotive and steamship design and mechanical engineering such as the steam hammer. This is the traditional picture of James Watt. After his death, his son, James Watt junior, projected his father’s image through commissioning sculptures, medals, paintings and biographies which celebrated his reputation as a ‘great man’ of industry and science. Though some academic appraisals have sought to move beyond the heroic image of Watt, there is still a tendency to focus on his steam technology. This collection of ten chapters breaks new ground by looking at Watt in new ways: by exploring his philosophical and intellectual background; the relevance of his Greenock environment; the influence of his wives, Peggy and Ann; Watt’s political fears and beliefs; his links with other scientists such as Thomas Beddoes, Davies Giddy, Humphry Davy, Joseph Black and James Keir; Watt and the business of natural philosophy; his workshop in the Science Museum and what it reveals; the myth or reality of his involvement with organ making and the potential of Birmingham’s Watt Papers for further exploration of his personality, family and domestic and business activities.
8
Lutz, Norma Jean. J. C. Watts (Black Americans of Achievement (Paperback)). Tandem Library, 1999.
Encontre o texto completo da fonte
9
Campney, Brent M. S. “Peace at Home Is the Most Essential Thing”. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252039508.003.0009.
Texto completo da fonteResumo:
This chapter chronicles the long “Red Summer” and persistent racial violence throughout the 1920s. With America's entry into World War I, black populations swelled in response to labor shortages, thus precipitating racial conflict over jobs and housing between white residents of northern industrial cities and the black newcomers. These tensions would culminate in the “Red Summer,” a season of race riots, conflagrations, and other types of spectacular violence. Though the wartime surge in violence would subside after 1921, racial prejudice and violence continued on. Despite these setbacks, however, black resistance likewise persisted; and this period marks the ascent of a new generation of civil rights activists, as well as a few other notable milestones such as the Thurman-Watts v. Board of Education of Coffeyville and Brown v. Board of Education decisions and the establishment of the Kansas City branch of the National Association for the Advancement of Colored People (NAACP).
10
Art, Rocky. Watche Me Whip : Blank Recipe Journal : May the Fork Be with You: Blank Cookbook for Writing Recipes in. Independently Published, 2020.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Black wattle"
1
Turner, Kofi-Charu Nat. "War on Poverty, Watts Uprising, and the Teen Post (1964–1967)". In Caffie Greene and Black Women Activists, 70–96. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003204527-8.
Texto completo da fonte
2
Haschemi Yekani, Elahe. "Introduction: Provincialising the Rise of the British Novel in the Transatlantic Public Sphere". In Familial Feeling, 1–66. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-58641-6_1.
Texto completo da fonteResumo:
AbstractIn the introduction to Familial Feeling, Haschemi Yekani proposes a transatlantic reframing of Ian Watt’s famous work on the rise of the novel. Offering a critical overview of the intertwined histories of enslavement and modernity, this chapter proposes a focus on transatlantic entanglement already in the eighteenth and early nineteenth century to challenge the more prevalent retrospective paradigm of “writing back” in postcolonial studies. Introducing the concepts of familial feeling and entangled tonalities, Haschemi Yekani describes the affective dimension of literature that shapes notions of national belonging. This is then discussed in the book in relation to the four entangled aesthetic tonalities of familial feeling in early Black Atlantic writing and canonical British novels by Daniel Defoe, Olaudah Equiano, Ignatius Sancho, Laurence Sterne, Jane Austen, Robert Wedderburn, Charles Dickens, and Mary Seacole. To provide context for the following literary readings, scholarship on sentimentalism and the abolition of slavery is introduced and significantly extended, especially in relation to the shifts from moral sentiment and the abolition of the slave trade in the eighteenth century to social reform and the rise of the new imperialism and colonial expansion in the nineteenth century.
3
Hanlon, Robert T. "James Watt". In Block by Block: The Historical and Theoretical Foundations of Thermodynamics, 309–15. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198851547.003.0028.
Texto completo da fonteResumo:
Watt improved the efficiency of the steam engine by moving the condenser out of Newcomen’s one-cylinder operation. Watt’s continuous improvements efforts blazed the trail towards the founding of thermodynamics.
4
"Writing Watts". In Black Arts West, 90–114. Duke University Press, 2010. http://dx.doi.org/10.1215/9780822392620-004.
Texto completo da fonte
5
"WRITING WATTS:". In Black Arts West, 90–114. Duke University Press, 2010. http://dx.doi.org/10.2307/j.ctv1134fs5.8.
Texto completo da fonte
6
Schranz, Kristen M. "Catalysing Chemical Correspondence". In James Watt (1736-1819), 137–62. Liverpool University Press, 2020. http://dx.doi.org/10.3828/liverpool/9781789620818.003.0007.
Texto completo da fonteResumo:
James Watt has already been established as a competent eighteenth-century chemist. His role as a chemical correspondent, however, has not been examined adequately. This chapter argues that through well-timed letters Watt circulated vital knowledge between two contemporary chemists, Joseph Black and James Keir. Two case studies in industrial chemistry—the production of alkali and the separation of plated metals—reveal Watt to be an active letter writer who initiated collaboration between business partners and communicated processes promptly. No mere passive conduit of information, Watt was a confidant who encouraged propriety in the manner of correspondence. He was a lynchpin between Black and Keir when the former was fearful of writing the latter, and he censured ill-timed disclosure of industrial secrets. This chapter concludes that future study of Watt’s epistolary exchanges with other chemists will establish more firmly his mediating role in chemical correspondence in the eighteenth-century Republic of Letters.
7
Carico, Aaron. "Conclusion". In Black Market, 184–200. University of North Carolina Press, 2020. http://dx.doi.org/10.5149/northcarolina/9781469655581.003.0006.
Texto completo da fonteResumo:
The conclusion turns to the trap of the ghetto where Black Americans found themselves caught in the wake of the Great Migration, on the brink of another reformation in U.S. slave racial capitalism. Linking the racial geography of these spaces to the history of slave racial capitalism, it outlines the colonialism inherent in segregation, from zoning laws to slumming to the Bronx “slave markets.” It connects the ghetto to the plantation and to the rise of the prison and mass incarceration, ending with the Watts uprising of 1965 and the call for total abolition.
8
Baptiste, Bala J. "Organized Action Colorized White Radio in the Crescent City". In Race and Radio, 3–20. University Press of Mississippi, 2019. http://dx.doi.org/10.14325/mississippi/9781496822062.003.0001.
Texto completo da fonteResumo:
Black voices on radio provided community building opportunities for African Americans. As such, blacks created an alternative public sphere which allowed them to engage in discourse that unifies people into a collective. The Urban League on the national and local levels aided community building by organizing its members to approach radio station managers beginning in 1941. The organization's directives led to the establishment of the “Negro Forum,” an Afrocentric talk show that integrated the airways in New Orleans in 1946. WNOE station owner James Noe provided O. C. W. Taylor 15 minutes of free airtime on Sundays from 10 a.m. to 10:15 a.m. Noe's decision to accept the “Religious Forum” was also influenced by his interest in gaining Federal Communications Commission approval to change his position on the dial and increase the station's broadcast power from 250 watts to 50,000 watts.
9
"3. Writing Watts: The Rise and Fall of Cultural Liberalism". In Black Arts West, 90–114. Duke University Press, 2020. http://dx.doi.org/10.1515/9780822392620-006.
Texto completo da fonte
10
Hernández, Kelly Lytle. "Justice for Samuel Faulkner". In City of Inmates. University of North Carolina Press, 2017. http://dx.doi.org/10.5149/northcarolina/9781469631189.003.0007.
Texto completo da fonteResumo:
The sixth chapter spans the decades between the 1920s and the 1960s. In these years, as Los Angeles took center stage in the nation’s landscape of jails and prisons, the population of African Americans incarcerated in Los Angeles shot from politically irrelevant and slightly disproportionate to politically dominant and stunningly disproportionate. It has remained so ever since. Chapter 6 tracks the origins of the incarceration of blacks in Los Angeles. In particular, it details why and how black incarceration so disproportionately followed the expansion of L.A.’s African American community. Moreover, by exhuming the first recorded killing of a young black male by the LA PD, which occurred in South Central Los Angeles on the evening of April 24, 1927, this chapter details why and how police brutality so closely accompanied black incarceration in the city. It is a brutal history attended by persistent—and, in time, explosive—black protest, tracking how community members fought police brutality between 1927 and the outbreak of the Watts Rebellion in 1965. Indeed, race, policing, and protest became inextricable as Los Angeles advanced toward becoming the carceral capital of the United States.
Trabalhos de conferências sobre o assunto "Black wattle"
1
Rojas, J. P., W. Alqarni, K. Kalantan, M. M. Hussain e J. Mink. "Nano-watt fueling from a micro-scale microbial fuel cell using black tea waste". In 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2015. http://dx.doi.org/10.1109/nano.2015.7388776.
Texto completo da fonte
2
Dalton, Sean, Henry Koon, Jennifer O’Malley e Julianna Abel. "A Black Box Design Approach to Avian-Inspired SMA Coil Actuated Wearable Morphing Angel Wings". In ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3943.
Texto completo da fonteResumo:
Black box design is a constraint driven design approach that distills essential elements of a physical process into inputs and outputs. This paper details the black box design implementation and validation of shape memory alloy (SMA) coil actuators as active members in a Watt I six bar avian-inspired wearable morphing angel wing mechanism. SMA coil actuators leverage the unique characteristics of high energy density SMA wire by providing a compact structural platform for large actuation displacement applications. The moderate force and displacement performance of low spring index coil actuators paired with their virtually silent actuation performance made them an attractive actuator solution to an avian-inspired wearable morphing wing mechanism for the University of Minnesota Department of Theatre Arts and Dance production of ‘Marisol’. The wing design constraints (extended span of 7.5 ft, a closed span of 3 ft) required a tailorable actuator system with capacity to perform at particular target force and strain metrics cyclically. A low spring index parameter study was conducted to facilitate an accelerated phase of design prototyping. The parameter study featured six SMA coil actuator prototypes made with 0.012” diameter Dynalloy Flexinol® wire of varying spring indexes (C = 2.5–4.9). The coil actuators were manufactured through a CNC winding process, shape set in a furnace at 450 °C for 10 minutes, and water quenched for hardening. A series of thermomechanical actuation tests were conducted to experimentally characterize the low spring index actuation performances. The coil actuation characterizations demonstrated increased force and decreased actuator displacement corresponding to decreased spring indexes. Scaling these results aided an accelerated design of an actuator system. The actuator system consisted of four C = 3.05 coil actuators wound with 0.02” diameter SMA that were integrated into each Watt I mechanism. The characterization of the force-displacement profiles for low index SMA coil actuators provides an effective empirical design strategy for scaling actuator performance to mechanical systems requiring moderate force, moderate displacement actuators.
3
Çıkım, Taha, Oğuz Tatar, Ali Koşar e Devrim Gözüaçık. "Power Reclamation Efficiency of a Miniature Energy Harvesting Device Using Internal Fluid Flows". In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87967.
Texto completo da fonteResumo:
This study comprises experimental energy harvesting results of a miniature internal liquid flow power reclamation device. The system’s reclamation principal is basically related to translation of mechanical energy and its conversion into electrical energy. The translation phase is concerned about capturing vibrations caused in the device by inner liquid flow via device tails, which are designed by taking inspiration from black ghost knife fish (Apteronotus albifrons) body shape. On the other hand, the conversation phase is attained by the rotating movement of the mentioned tails so that the rotating circular waterproof magnet structure could yield power through magnetic polarization. A simple current amplifier increases the voltage obtained, and the reclaimed power is transferred to the 3.76V (Ni-Mg) batteries. The efficiency tests were performed within a range of flow velocities (1.0 m/s ∼ 5.0 m/s) under various fluid densities (fresh water, low dense and high dense water) and different ambient temperatures (22 and 38 °C) in order to obtain a comparative parametric data about the device response to internal fluid flow. In optimum test conditions (fresh water as working fluid and 38°C ambient temperature) the device harvested up to 17, 26 Watts of energy.