Bibliografias temáticas / Buckling / Teses / dissertações
Siga este link para ver outros tipos de publicações sobre o tema: Buckling.

Teses / dissertações sobre o tema "Buckling"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 25 de julho de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "Buckling".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.

1

CUNHA, PATRICIA CARLA DA. "BUCKLING AND POST-BUCKLING BEHAVIOR OF FOLDED PLATES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2005. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=7691@1.

Texto completo da fonte
Resumo:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>O presente trabalho tem por objetivo estudar o comportamento crítico e pós-crítico de placas dobradas. Placas dobradas, tanto de aço quanto de concreto, têm sido usadas com grande freqüência em obras de engenharia, particularmente como paredes portantes e coberturas de grandes vãos. Neste último caso, placas dobradas têm uma aplicação semelhante a de cascas esbeltas, sendo, porém, mais simples de construir, dado que são compostas de superfícies planas. Neste trabalho utiliza-se o software ABAQUS para análise de placas dobr
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Khamisi, Ali. "Stability of Tubular Steel Structures : Buckling and Lateral Torsional Buckling." Thesis, Université de Lorraine, 2016. http://www.theses.fr/2016LORR0172.

Texto completo da fonte
Resumo:
Ce sujet est d’actualité suite à une évolution rapide des types de conception de structures élancées utilisées dans les installations provisoires. C’est seulement depuis une vingtaine d’années que ces structures sont préfabriquées en cadres multidirectionnels (de sections tubulaires en acier ou en aluminium). Ces structures sont légères et leur stabilité réside seulement dans les raideurs internes au niveau des files de montants et au niveau horizontal par les planchers ainsi que dans les liaisons avec l’ouvrage. Ce travail concerne l’étude des instabilités (flambement-déversement) en tenant c
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Clarin, Mattias. "Plate buckling resistance : patch loading of longitudinally stiffened webs and local buckling /." Luleå : Division of Structural Engineering - Steel Structures, Department of Civil, Mining and Environmental Engineering, Luleå University of Technology, 2007. http://epubl.ltu.se/1402-1544/2007/31/LTU-DT-0731-SE.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Mahar, Akshay Mangal. "Buckling and post-buckling behaviour of cold-formed steel built-up columns." Thesis, Queensland University of Technology, 2022. https://eprints.qut.edu.au/232829/1/Akshay%20Mangal_Mahar_Thesis.pdf.

Texto completo da fonte
Resumo:
This research investigated the stability and strength behaviour of cold-formed steel built-up columns. The stability behaviour was investigated by developing a compound spline finite strip based computational tool, while experiments and finite element studies were performed to investigate the strength behaviour. The results highlighted the shortcomings of the current design standards, including North American and Australian/New Zealand Standards, and led to simplified design procedures and strength equations for cold-formed steel built-up columns. Overall, this research has significantly impro
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Sadr-Hashemi, Farshid. "Buckling of conical shells." Thesis, University College London (University of London), 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.685403.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

JUNIOR, WALTER MENEZES GUIMARAES. "BUCKLING OF VISCOELASTIC STRUCTURES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2006. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=9164@1.

Texto completo da fonte
Resumo:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>Este trabalho apresenta um modelo computacional aplicável à análise de sistemas estruturais viscoelásticos submetidos a grandes deslocamentos, com particular atenção ao fenômeno da instabilidade. A discretização dos modelos é obtida através de elementos finitos isoparamétricos bidimensionais que podem ser empregados na análise de colunas, pórticos, arcos e cascas axissimétricas. A estabilidade elástica do sistema é verificada ao longo de trajetórias de equilíbrio definidas no espaço carga-deslocamentos, onde a ocorrência d
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Moroder, Daniel. "Longitudinal bar buckling behavior." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2008. http://amslaurea.unibo.it/94/.

Texto completo da fonte
Resumo:
Reinforced concrete columns might fail because of buckling of the longitudinal reinforcing bar when exposed to earthquake motions. Depending on the hoop stiffness and the length-over-diameter ratio, the instability can be local (in between two subsequent hoops) or global (the buckling length comprises several hoop spacings). To get insight into the topic, an extensive literary research of 19 existing models has been carried out including different approaches and assumptions which yield different results. Finite element fiberanalysis was carried out to study the local buckling behavior with v
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Purbolaksono, Judha. "Buckling and post-buckling analysis of cracked plates by the boundary element method." Thesis, Queen Mary, University of London, 2003. http://qmro.qmul.ac.uk/xmlui/handle/123456789/1831.

Texto completo da fonte
Resumo:
This thesis presents boundary element formulations for buckling and nonlinear buckling analysis of plates. Dual boundary element formulations are also presented for linear and nonlinear buckling, and large deformation analysis of crack behaviour in plates. Reissner plate theory is adopted to represent shear deformable plate bending, and two dimensional plane stress is used to model the membrane behaviour of plate. By taking into account the nonlinear interaction between forces and rotations in the equilibrium equation, the nonlinear formulation is formed by coupling equations of shear deformab
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

SOLTANI, GHULAM H. "BUCKLING AND POST-BUCKLING RESPOSNE OF SINGLE CURVATUE BEAM-COLUMNS UNDER THERMAL (FIRE) LOADS." OpenSIUC, 2017. https://opensiuc.lib.siu.edu/theses/2147.

Texto completo da fonte
Resumo:
The main objective of this research was to study the buckling and post-buckling response of axially restrained beam-columns under thermal loading. Also the effects of slenderness ratios on pre-buckling and post-buckling behavior which is neglected in AISC specification was examined. The results of this study indicate that: a) Both the deflection and end moment amplification factors are significantly smaller for the restrained beam-columns subjected to temperature increase than the corresponding unrestrained beam-columns subjected to (mechanical) axial loads. b) The deflection amplification fa
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ozdemir, Kerem Murat. "Lateral Buckling Of Overhanging Beams." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606488/index.pdf.

Texto completo da fonte
Resumo:
Lateral torsional buckling should be taken into account during the design of overhanging steel beams. One special type of overhanging beams is the crane trolley monorails. Lateral buckling of overhanging monorails under idealized loading and boundary conditions has been studied in the past using classical mathematical procedures. This thesis aims to present a detailed investigation of overhanging monorails using finite element analysis. Effects of different loading and boundary conditions were studied in detail. It was found out that the location of loading and supports on the cross section ha
Estilos ABNT, Harvard, Vancouver, APA, etc.
11

Miles, David John. "Lateral thermal buckling of pipelines." Thesis, University of Cambridge, 1998. https://www.repository.cam.ac.uk/handle/1810/251654.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
12

Elmahdy, Ghada. "Buckling of built-up columns." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ30272.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
13

Ahmed, Hesham. "Parametric buckling analyses of plates." Thesis, Oxford Brookes University, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.616317.

Texto completo da fonte
Resumo:
Classical methods for solving plate buckling problems involve using different forms of solution on case by case basis. In place of this approach, This thesis presents a novel single form equation and the parameters required to account for the interaction of geometry, boundary conditions and different forms of edge load distribution. The thesis also presents more results for different combination of plate edge boundary conditions than can be found in most design manuals such as the ESDD. The method presented is titled 'Parametric Buckling Analysis (PBA),. It combines a number of concepts in a h
Estilos ABNT, Harvard, Vancouver, APA, etc.
14

Straume, Jonas Gullaksen. "Dynamic buckling of marine structures." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26350.

Texto completo da fonte
Resumo:
In this report the buckling resistance of marine structures when dynamic effects is important is investigated. A review of the governing theory is presented for both beam and plates. A sample of the different ways of solving the bucking problem is presented, and what kind of assumptions that are made. The overall conclusion from this study is that a structure may have a significant reserve capacity with respect to buckling when dynamic effects are important.A selected solution to the dynamic buckling problem for unstiffened plates is chosen. A MATLAB program is written using this basis with nu
Estilos ABNT, Harvard, Vancouver, APA, etc.
15

Wright, Jennifer Edith. "Compound bifurcations in delamination buckling." Thesis, University of Bath, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.432375.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
16

Wadee, Mohammad Ahmer. "Localized buckling in sandwich structures." Thesis, University of Bath, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.266473.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
17

Yang, Zhicheng. "Dynamic buckling of square tubes." Thesis, University of Liverpool, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.243260.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
18

Louca, Louca A. "Buckling behaviour of stiffener outstands." Thesis, University of Surrey, 1991. http://epubs.surrey.ac.uk/782/.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
19

Tran, Vinh Cong. "Imperfect upheaval subsea pipeline buckling." Thesis, Sheffield Hallam University, 1994. http://shura.shu.ac.uk/3179/.

Texto completo da fonte
Resumo:
The objective of the research programme has been to develop a set of theoretical models suited to the perceived needs of industrial practice with regard to in-service, subsea pipeline buckling. The role of imperfections is shown to be of central importance. These factors are considered in the context of modern offshore engineering practice, including the particular employment of trenching and/or burial for purposes of protection. Novel, small scale, full thermo-mechanical system testing is presented, the design and construction of the actual experimental set-up being a key feature of the resea
Estilos ABNT, Harvard, Vancouver, APA, etc.
20

Hakmi, M. R. "Local buckling of sandwich panels." Thesis, University of Salford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234622.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
21

Fan, Chun Keung Roger. "Buckling in continuous composite beams." Thesis, University of Warwick, 1990. http://wrap.warwick.ac.uk/106724/.

Texto completo da fonte
Resumo:
Two aspects of the buckling behaviour of continuous composite beams of steel and concrete are considered. The first part relates to the study of moment redistribution in braced slender beams (Class 3 draft Eurocode 4) due to local buckling in the hogging moment regions. The second part describes the experimental work to investigate the ultimate load behaviour of unbraced compact beams (Classes 1 and 2 draft Eurocode 4) in the hogging moment regions. For a braced continuous slender composite beam, local buckling at an internal support allows a redistribution of bending moment from the hogging r
Estilos ABNT, Harvard, Vancouver, APA, etc.
22

Vollmecke, Christina. "Nonlinear buckling of delaminated panels." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5729.

Texto completo da fonte
Resumo:
Laminated structures have increasingly gained popularity in engineering applications owing to their advantageous properties. Particularly in aerospace applications, laminated components, typically comprising fibre-reinforced composites, have a soaring demand owing to their high strength to weight ratio. However, owing to the complex nature of the material, several different failure mechanisms may occur; amongst them is delamination, i.e. the separation at the interface between two laminates. This defect is often difficult to detect, yet may significantly reduce a component's load carrying capa
Estilos ABNT, Harvard, Vancouver, APA, etc.
23

CHAKRABARTI, SEKHAR KUMAR. "INELASTIC BUCKLING OF GUSSET PLATES." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184188.

Texto completo da fonte
Resumo:
The strength and behavior of gusset plates in buckling is evaluated herein based on data from the experimental investigations conducted by other researchers and the analytical work presented herein. A set of design guidelines has been recommended through the review of the current practice. Representative single and double brace gusset plates normally adopted for connections with compressive bracing/diagonal members in braced frames and trusses, were modeled and analyzed using linear and nonlinear finite element methods to determine the buckling loads. The buckling analysis data along with the
Estilos ABNT, Harvard, Vancouver, APA, etc.
24

Mohamedien, Mohamed Ahmed. "The buckling of grid shells." Thesis, University of Bath, 1990. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.254000.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
25

Schleyer, Graham Klaus. "Buckling of tank roofs : a buckling analysis and experimental investigation of storage tank domed roofs." Thesis, University of Strathclyde, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362804.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
26

Cai, Junle. "Interactive Buckling and Post-Buckling Studies of Thin-Walled Structural Members with Generalized Beam Theory." Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/75055.

Texto completo da fonte
Resumo:
Most thin-walled metallic structural members experience some extent of interactive buckling that corrodes the load carrying capacity. Current design methods predict the strength of thin-walled metallic structural members based on individual buckling limit-states and limited case of interactive buckling limit state. In order to develop design methods for most coupled buckling limit states, the interaction of buckling modes needs to be studied. This dissertation first introduces a generally applicable methodology for Generalized Beam Theory (GBT) elastic buckling analysis on members with holes
Estilos ABNT, Harvard, Vancouver, APA, etc.
27

Ghosh, Biswarup. "Consequences of Simultaneous Local and Overall Buckling in Stiffened Panels." Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/31803.

Texto completo da fonte
Resumo:
In this thesis improved expressions for elastic local plate buckling and overall panel buckling of uniaxially compressed T-stiffened panels are developed and validated with 55 ABAQUS eigenvalue buckling analyses of a wide range of typical panel geometries. These two expressions are equated to derive a new expression for the rigidity ratio (EIx/Db)CO that uniquely identifies ¡°crossover¡± panels ¨C those for which local and overall buckling stresses are the same. The new expression for (EIx/Db)CO is also validated using the 55 FE models. Earlier work by (Chen, 2003) had produced a new step
Estilos ABNT, Harvard, Vancouver, APA, etc.
28

Murphy, A. "Accurate and efficient buckling and post buckling analysis of fuselage panels loaded in shear and compression." Thesis, Queen's University Belfast, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.273230.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
29

Nygård, David. "Tensile armour buckling in flexible pipes." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18652.

Texto completo da fonte
Resumo:
The exible pipelines has been widely used by the oil and gas industry the lastdecades and this trend is expected to continue as the operating depths are increasedfurther. For deep water applications the radial and lateral buckling modes can becritical. Many studies has been carried out using nite element models to studythese failure modes.In this thesis a nite element model is created with the aim to recreate resultsobtained in a recently published article by Vaz and Rizzo. The model is built upusing pipe, beam, contact and spring elements to represent the complex behaviourof the cross section
Estilos ABNT, Harvard, Vancouver, APA, etc.
30

Maltby, Timothy Crichton. "The upheaval buckling of buried pipelines." Thesis, University of Cambridge, 1993. https://www.repository.cam.ac.uk/handle/1810/251542.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
31

Pinna, Rodney. "Buckling of suction caissons during installation." University of Western Australia. School of Civil Engineering, 2003. http://theses.library.uwa.edu.au/adt-WU2004.0008.

Texto completo da fonte
Resumo:
Suction caissons are a foundation system for offshore structures which offer a number of advantages over traditional piled foundations. In particular, due to the method of installation used, they are well suited for deep-water applications. The suction caisson consists of an open ended cylindrical shell, which is installed below the seabed in a sequence which consists of two loading phases. The caisson is first installed part way under self weight, with the installation being completed by lowering the pressure within the cylinder and thus allowing the ambient water pressure to force the caisso
Estilos ABNT, Harvard, Vancouver, APA, etc.
32

Dorey, Alfred Boyd. "Critical buckling strains in energy pipelines." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ60288.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
33

Burrell, Geoffrey Scott. "Distortional buckling in steel I-girders." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 143 p, 2007. http://proquest.umi.com/pqdweb?did=1338867451&sid=1&Fmt=2&clientId=8331&RQT=309&VName=PQD.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
34

Li, Hong. "Experimental micromechanics of composite buckling strength." Thesis, Georgia Institute of Technology, 1988. http://hdl.handle.net/1853/11719.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
35

Blackmore, Avril. "Dynamical systems analogy in upheaval buckling." Thesis, Imperial College London, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.307455.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
36

Xiao, Qiuwu. "Lateral Torsional Buckling of Wood Beams." Thèse, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/31174.

Texto completo da fonte
Resumo:
Structural wood design standards recognize lateral torsional buckling as an important failure mode, which tends to govern the capacity of long span laterally unsupported beams. A survey of the literature indicates that only a few experimental programs have been conducted on the lateral torsional buckling of wooden beams. Within this context, the present study reports an experimental and computational study on the elastic lateral torsional buckling resistance of wooden beams. The experimental program consists of conducting material tests to determine the longitudinal modulus of elasticity
Estilos ABNT, Harvard, Vancouver, APA, etc.
37

MacLaurin, James Normand. "The buckling of capillaries in tumours." Thesis, University of Oxford, 2011. http://ora.ox.ac.uk/objects/uuid:ba252220-3c06-4d49-8696-655f6fefcd31.

Texto completo da fonte
Resumo:
Capillaries in tumours are often severely buckled (in a plane perpendicular to the axis) and / or chaotic in their direction. We develop a model of these phenomena using nonlinear solid mechanics. Our model focusses on the immediate surrounding of a capillary. The vessel and surrounding tissue are modelled as concentric annulii. The growth is dependent on the concentration of a nutrient (oxygen) diffusing from the vessel into the tumour interstitium. The stress is modelled using a multiplicative decomposition of the deformation gradient F=F_e F_g. The stress is determined by substituting the e
Estilos ABNT, Harvard, Vancouver, APA, etc.
38

Simelane, Philemon Sphiwe. "Thermal buckling of laminated composite plates." Thesis, Peninsula Technikon, 1998. http://hdl.handle.net/20.500.11838/1240.

Texto completo da fonte
Resumo:
Thesis (MTech (Mechanical Engineering))--Peninsula Technikon, 1998<br>However, studies were also conducted for the buckling of composite laminates involving temperature distribution. Chen and Chen (1991) studied thermal buckling of laminated plates under uniform and nonuniform temperature distribution using the eight-node Serendipity finite element. Mathew, Singh and Rao (1992) investigated thermal buckling of antisymmetric cross-ply composite laminates with a onedimensional furite element having two nodes and six degrees of freedom. Chandrashekhara (1992) accounted for transverse shear
Estilos ABNT, Harvard, Vancouver, APA, etc.
39

Tiwari, Nachiketa. "Secondary Buckling of Laminated Composite Plates." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/37789.

Texto completo da fonte
Resumo:
The postbuckling load carrying capacity of composite plates offers immense potential to their applications for loads exceeding their primary buckling load. However, such an efficient and economical usage of these plates can be reliable only if the nonlinear postbuckling behavior of these plates, which includes a good understanding of secondary buckling, is understood thoroughly. The present investigation is an attempt to understand secondary buckling of almost square composite clamped-simply supported plates, both unstiffened as well as stiffened, in some detail. With the help of the finite e
Estilos ABNT, Harvard, Vancouver, APA, etc.
40

Maschner, Emil Alexis. "Vertical buckling of heated submarine pipelines." Thesis, London South Bank University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336365.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
41

Jowhari, Moghadam Shirin. "Plastic buckling of columns and plates." Thesis, Imperial College London, 2015. http://hdl.handle.net/10044/1/29865.

Texto completo da fonte
Resumo:
The theory of buckling strength of compression members in the plastic range has been extensively studied, and numerical methods already exist which deal with such behaviour. However, there is a significant research interest in developing analytical models for the plastic buckling, largely driven by the need for simplified mechanics based design tools, but also by the desire for enhanced understanding of this complex phenomenon. A thorough investigation into the inelastic buckling of columns and plates reveals the existence of two well-known inconsistencies recognised as the 'Column Paradox' an
Estilos ABNT, Harvard, Vancouver, APA, etc.
42

Coburn, Broderick Howard. "Buckling of stiffened variable stiffness panels." Thesis, University of Bristol, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.687427.

Texto completo da fonte
Resumo:
Over the past five decades the aerospace industry has seen the increased use and development of composite materials and structures, largely due to their superior specific strength and stiffness in comparison with metals. These two major attributes, coupled with their increased tailorability, enable the design of lighter, more efficient structures. Traditional tailoring is limited to modifying the orientation of laminate plies to achieve the desired performance. However, recent advancements in tape laying and fibre placement technologies, have led to the possibility of laminates with varying fi
Estilos ABNT, Harvard, Vancouver, APA, etc.
43

Liu, Jia. "Buckling Induced Functionality in Soft Structures." Thesis, Harvard University, 2016. http://nrs.harvard.edu/urn-3:HUL.InstRepos:33493413.

Texto completo da fonte
Resumo:
A variety of instabilities can be triggered when elastic structures are subjected to mechanical loadings. While such instabilities have traditionally been considered as a failure, a new trend is emerging in which the dramatic geometric changes induced by them are harnessed to enable new functionalities. In this thesis, I report a systematic study on the morphology and functionality changes induced by buckling in soft structures. Using a combination of theoretical, numerical and experimental analyses, I investigate the non-linear response of a variety of one dimensional, two dimensional and t
Estilos ABNT, Harvard, Vancouver, APA, etc.
44

Smith, Frank Harrison. "Elastic buckling solutions for thin-walled metal columns with perforation patterns." Thesis, Virginia Tech, 2013. http://hdl.handle.net/10919/23680.

Texto completo da fonte
Resumo:
Presented are approximate finite strip methods for use in predicting elastic buckling strength of cold-formed steel columns. These methods were developed by examining elemental behavior of cross-sections in eigen-buckling analyses and validated using a large database of finite element rack-type columns with perforation patterns. The influence of perforations is accounted by reduced thicknesses related to the plate buckling coefficient and transverse web rotational stiffness in the prediction of local and distortional buckling respectively. Global buckling prediction including the influence of
Estilos ABNT, Harvard, Vancouver, APA, etc.
45

Arpaci, Erdogan. "Analysis Of Sinusoidal And Helical Buckling Of Drill String In Horizontal Wells Using Finite Element Method." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/2/12611003/index.pdf.

Texto completo da fonte
Resumo:
The number of horizontal wells is increasing rapidly in all over the world with the growth of new technological developments. During horizontal well drilling, much more complex problems occur when compared with vertical well drilling, such as decrease in load transfer to the bit, tubular failure, tubular fatigue and tubular lock-up. This makes selection of appropriate tubular and making the right drill string design more important. As the total compression load on the horizontal section increases, the behavior of the tubular changes from straight to sinusoidal buckling, and if the total compre
Estilos ABNT, Harvard, Vancouver, APA, etc.
46

Paspuleti, Suma. "Mechanical and thermal buckling of thin films." Diss., Columbia, Mo. : University of Missouri-Columbia, 2005. http://hdl.handle.net/10355/4302.

Texto completo da fonte
Resumo:
Thesis (M.S.)--University of Missouri-Columbia, 2005.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (July 14, 2006) Includes bibliographical references.
Estilos ABNT, Harvard, Vancouver, APA, etc.
47

St-Amour, Rémi. "Lateral Torsional Buckling of Wood I-Joist." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35161.

Texto completo da fonte
Resumo:
Engineered wood I-joists have grown in popularity as flooring and roofing structural systems in the past 30 years, replacing solid sawn lumber joists. Typical wood I-joists are manufactured with a very slender section, which is desirable to achieve higher flexural capacities and longer spans; however, this makes them susceptible to lateral torsional buckling failure. Continuous beam spans and uplift forces on roof uplift are potential scenarios where lateral instability can occur and reflects the need to investigate the lateral torsional buckling behavior of wood I-joists. Within this context,
Estilos ABNT, Harvard, Vancouver, APA, etc.
48

Berlin, Andrew A. "Towards Intelligent Structures: Active Control of Buckling." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/6768.

Texto completo da fonte
Resumo:
The buckling of compressively-loaded members is one of the most important factors limiting the overall strength and stability of a structure. I have developed novel techniques for using active control to wiggle a structural element in such a way that buckling is prevented. I present the results of analysis, simulation, and experimentation to show that buckling can be prevented through computer-controlled adjustment of dynamical behavior.sI have constructed a small-scale railroad-style truss bridge that contains compressive members that actively resist buckling through the use of pi
Estilos ABNT, Harvard, Vancouver, APA, etc.
49

El-Adas, Kadmous Moufid. "Linear and nonlinear buckling analysis via ABAQUS." Master's thesis, This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-01262010-020017/.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
50

Lee, Seungsik. "Flexural-torsional buckling of pultruded T-sections." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/19496.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado em listas de outros tipos de fontes sobre o assunto "Buckling":
Artigos de revistas Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia