Literatura científica selecionada sobre o tema "Buildings Environmental engineering"

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Buildings Environmental engineering".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Buildings Environmental engineering"

1

Zhou, Ruina. "Research on the Application of Thermal Insulation Materials in Construction Engineering." Highlights in Science, Engineering and Technology 106 (July 16, 2024): 300–304. http://dx.doi.org/10.54097/sfzt7648.

Texto completo da fonte
Resumo:
As one of the most important supporting industries of urbanization, the construction industry has also caused environmental pollution and other problems in the process of rapid expansion. Therefore, promoting the development of green buildings and intelligent buildings and improving the quality of buildings is an inevitable trend in the current construction industry, which reflects the necessity of insulation materials in environmental protection and energy saving building materials. This paper classifies the application of thermal insulation materials in building engineering, and lists some c
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Selecká, Iveta, Silvia Vilčeková, and Andrea Moňoková. "Verification of building environmental assessment system for houses." Selected Scientific Papers - Journal of Civil Engineering 14, no. 1 (December 1, 2019): 55–66. http://dx.doi.org/10.1515/sspjce-2019-0006.

Texto completo da fonte
Resumo:
Abstract Sustainable construction and its architecture of buildings seeks to minimize the negative environmental impact of buildings by efficiency in the use of materials, energy, and development space and the ecosystem at large. Sustainable buildings use a conscious approach to energy and ecological conservation in the design of the built environment in cities. This article is devoted to the environmental assessment of three family houses which represent three different material and design solutions. The houses were evaluated through the Slovak building environmental assessment system (BEAS),
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Millán-Martínez, Marlón, Germán Osma-Pinto, and Julián Jaramillo-Ibarra. "Estimating a Building’s Energy Performance using a Composite Indicator: A Case Study." TecnoLógicas 25, no. 54 (August 3, 2022): e2352. http://dx.doi.org/10.22430/22565337.2352.

Texto completo da fonte
Resumo:
Several studies have analyzed the integration of energy-saving strategies in buildings to mitigate their environmental impact. These studies focused mainly on a disaggregated analysis of such strategies and their effects on the building's energy consumption and thermal behavior, using energy engine simulation software (EnergyPlus, TRNSYS, and DOE2) or graphical interface software (DesignBuilder, eQuest, and ESP-r). However, buildings are complex systems whose energy behavior depends on the interaction of passive (e.g., location and construction materials) and dynamic (e.g., occupation) compone
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Elkabany, Sara N., and Marwa M. Elrashidey. "Towards Achieving Sustainable Environmental Efficiency: Rationalizing Energy used in Educational Buildings of University Campus." IOP Conference Series: Earth and Environmental Science 1283, no. 1 (January 1, 2024): 012009. http://dx.doi.org/10.1088/1755-1315/1283/1/012009.

Texto completo da fonte
Resumo:
Abstract The research deals with a practical and analytical study comparing the use of the computer program for digital simulation, Design Builder, to calculate the amount of energy consumption in buildings, as the aim of the research is to conclude the most influential architectural elements in reducing energy consumption in the typical building of Al-Azhar College of Engineering for Girls (CEG). This is done by calculating the amount of energy consumption of the college building with its existing specifications while making architectural modifications to the building to conclude which elemen
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Parn, Erika A., David Edwards, Zainab Riaz, Fahad Mehmood, and Joseph Lai. "Engineering-out hazards: digitising the management working safety in confined spaces." Facilities 37, no. 3/4 (February 28, 2019): 196–215. http://dx.doi.org/10.1108/f-03-2018-0039.

Texto completo da fonte
Resumo:
PurposeThis paper aims to report upon the further development of a hybrid application programming interface (API) plug-in to building information modelling (BIM) entitled confined spaces safety monitoring system “CoSMoS”. Originally designed to engineer-out environmental hazards associated with working in a building’s confined spaces (during the construction phase of a building’s life-cycle), this second generation version is expanded upon to use archival records to proactively learn from data generated within a sensor network during the building’s operations and maintenance (O&M) phase of
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Bersson, Thomas F., Thomas Mazzuchi, and Shahram Sarkani. "A FRAMEWORK FOR APPLICATION OF SYSTEM ENGINEERING PROCESS MODELS TO SUSTAINABLE DESIGN OF HIGH PERFORMANCE BUILDINGS." Journal of Green Building 7, no. 3 (July 2012): 171–92. http://dx.doi.org/10.3992/jgb.7.3.171.

Texto completo da fonte
Resumo:
Building owners, designers and constructors are seeing a rapid increase in the number of sustainably designed high performance buildings. These buildings provide numerous benefits to the owners and occupants to include improved indoor air quality, energy efficiency, and environmental site standards; and ultimately enhance productivity for the building occupants. As the demand increases for higher building energy efficiency and environmental standards, application of a set of process models will support consistency and optimization during the design process. Systems engineering process models h
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

OSAWA, Haruki, Yasuhiro MIKI, Kazuaki BOGAKI, and Hironori SUMIDA. "FIELD MEASUREMENT OF FORMALDEHYDE IN GOVERNMENT BUILDINGS(Environmental Engineering)." AIJ Journal of Technology and Design 9, no. 17 (2003): 255–60. http://dx.doi.org/10.3130/aijt.9.255.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Singh, Neha. "Case Study Retrofitting an Existing Building for Griha Green Building Certification." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 182–91. http://dx.doi.org/10.22214/ijraset.2022.45062.

Texto completo da fonte
Resumo:
Abstract: The infrastructure business in India is rapidly increasing. Infrastructure is the most major hindrance to the growth of Indian businesses in India. Existing buildings account for 45 percent of worldwide energy use in the current condition. These constructions' greenhouse gas emissions are mostly to blame for global warming, acid rain, and other environmental difficulties. We can reduce our dependency on limited natural resources like power, water, and materials which use in building while simultaneously enhancing our contribution to environmental quality by incorporating green buildi
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Baniyounes, Ali M., Yazeed Yasin Ghadi, Maryam Mahmoud Akho Zahia, Eyad Adwan, and Kalid Oliemat. "Energy, economic and environmental analysis of fuzzy logic controllers used in smart buildings." International Journal of Power Electronics and Drive Systems (IJPEDS) 12, no. 2 (June 1, 2021): 1283. http://dx.doi.org/10.11591/ijpeds.v12.i2.pp1283-1292.

Texto completo da fonte
Resumo:
This article is divided into three parts: the first presents a simulation study of the effect of occupancy level on energy usage pattern of Engineering building of Applied Science Private university, Amman, Jordan. The simulation was created on simulation mechanism by means of EnergyPlus software and improved by using the building’s data such as building’s as built plan, occupant’s density level based on data about who utilize the building throughout operational hours, energy usage level, Heating Ventilating and air conditioning (HVAC) system, lighting and its control systems and etc. Data reg
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ondová, Marcela, Adriana Eštoková, and Martina Fabianová. "Reducing the carbon footprint in the foundations structures of masonry family houses." Selected Scientific Papers - Journal of Civil Engineering 15, no. 2 (December 1, 2020): 55–62. http://dx.doi.org/10.1515/sspjce-2020-0018.

Texto completo da fonte
Resumo:
Abstract Nowadays, the environmental assessment becomes more and more of interest as an additional tool for the decision-makers. The researchers in civil engineering focus on building materials, structures as well as whole buildings environmental evaluation. Analysis of the environmental impact of particular structures may be helpful for selecting building materials, with regard to the environmental performance of buildings in the early project phase. The aim of this paper is presentation of an environmental evaluation of the rarely assessed particular structures – building foundations and the
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Buildings Environmental engineering"

1

Coleman, Keith LaMar. "Building optimization : an integrated approach to the design of tall buildings." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/38942.

Texto completo da fonte
Resumo:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2007.<br>Includes bibliographical references (p. 73-75).<br>There has been much research done on building optimization that deal with the issues within specific individual fields, such as architecture, structural engineering, and construction engineering. However, in practical application these issues must be addressed in a much more holistic manner as building design is becoming much more inclusive. A balance must be made that addresses the constructability and scheduling concerns of the con
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Graham, Mark Christopher. "Design strategies for coupling buildings." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/12307.

Texto completo da fonte
Resumo:
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1994.<br>Includes bibliographical references (leaves 134-135).<br>by Mark Christopher Graham.<br>M.S.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Chok, Kermin 1980. "Lateral systems for tall buildings." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/30135.

Texto completo da fonte
Resumo:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2004.<br>Includes bibliographical references.<br>The advances in three-dimensional structural analysis and computing resources have allowed the efficient and safe design of increasingly taller structures. These structures are the consequence of increasing urban densification and economic viability. The modern skyscraper has and will thus continue to feature prominently in the landscape of urban cities. The trend towards progressively taller structures has demanded a shift from the traditional
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Augé, Laurent J. (Laurent Jacques) 1980. "Structural magnetic induction dampers in buildings." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/29332.

Texto completo da fonte
Resumo:
Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2003.<br>Includes bibliographical references (leaf 49).<br>This thesis discusses the feasibility of structural magnetic induction dampers for dampening mechanical vibrations in buildings subjected to strong dynamic excitations. The concept of energy harvesting in various fields of engineering is first examined. Then it is applied to the design of magnetic induction dampers in buildings. Various implementations of these dampers are proposed and the related expected performances are estimated. S
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Gemme, Marie-Claude. "Seismic retrofitting of deficient Canadian buildings." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/51576.

Texto completo da fonte
Resumo:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2009.<br>Includes bibliographical references (p. 74-77).<br>Many developed countries such as Canada and the United States are facing a significant infrastructure crisis. Most of their facilities have been built with little consideration of seismic design and durability issues. As a result, these structures are vulnerable to earthquake loadings and are in urgent need of repair and retrofit. This thesis provides a literature review of the vulnerability of Canadian infrastructures built prior to
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Abboud, Klink Boutros Sami. "Motion-based design methodology for buildings." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/33261.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Gianferante, Nicholas F. (Nicholas Frank) 1964. "The application of photovoltaics for buildings." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80151.

Texto completo da fonte
Resumo:
Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1999.<br>Includes bibliographical references (leaves 83-84).<br>by Nicholas F. Gianferante.<br>M.Eng.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Abboud, Klink Boutros Sami. "Motion-based design methodology for buildings." Thesis, Massachusetts Institute of Technology, 1993. http://hdl.handle.net/1721.1/41325.

Texto completo da fonte
Resumo:
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1993.<br>Includes bibliographical references (leaves 131-132).<br>by Boutros Sami Abboud Klink.<br>M.S.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Malmqvist, Tove. "Methodological aspects of environmental assessment of buildings." Doctoral thesis, KTH, Miljöstrategisk analys, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9742.

Texto completo da fonte
Resumo:
The built environment contributes extensively to the overall environmental impact of society. An increasing number of tools have been developed worldwide for comprehensive environmental assessment and rating of buildings in order to make the building sector more sustainable. These tools are expected to drive and facilitate future environmental improvements and market transformation in the sector. This thesis explores different methodological aspects in tool development using experiences from two large Swedish projects, the EcoEffect and ByggaBo tools, which were developed with a high level of
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Cheung, Po-leung Alan, and 張寶樑. "Improvement of building legislation to include environmental design incommercial buildings of Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B31254858.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Buildings Environmental engineering"

1

1927-, Dixon John E., ed. Environmental control for agricultural buildings. Westport, Conn: AVI Pub. Co., 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Bevirt, W. David. Environmental systems technology. 2nd ed. Gaithersburg, Md: National Environmental Balancing Bureau, 1999.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Barre, H. J., L. L. Sammet, and G. L. Nelson. Environmental and Functional Engineering of Agricultural Buildings. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-1443-1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

L, Sammet L., and Nelson G. L. 1919-, eds. Environmental and functional engineering of agricultural buildings. New York: Van Nostrand Reinhold, 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Eastop, T. D. Mechanical services for buildings. Harlow, Essex, England: Longman Scientific & Technical, 1992.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Salvato, Joseph A. Environmental engineering and sanitation. Chichester: Wiley, 1994.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

China) International Conference of Green Building Materials and Energy-saving Construction (2011 Harbin. Green building materials and energy-saving construction: Selected, peer reviewed papers from the 2011 International Conference of Green Building Materials and Energy-saving Construction (GBMEC 2011) will be held on August 6, 2011 in Harbin, China. Durnten-Zurich, Switzerland: Trans Tech, 2011.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Frederick, Mitchell Charles, ed. Environment and services. 6th ed. London: Mitchell Pub. Co., 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Moore, Fuller. Environmental control systems: Heating cooling lighting. New York: McGraw-Hill, 1993.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Chadderton, David V. Building services engineering. 4th ed. New York, NY: Spon Press, 2004.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Buildings Environmental engineering"

1

Wilkes, Andrew. "Engineering Services." In Greener Buildings Environmental impact of property, 104–21. London: Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-22752-5_7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

de Dear, Richard, and Jungsoo Kim. "Thermal Comfort Inside and Outside Buildings." In Advanced Environmental Wind Engineering, 89–99. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55912-2_5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Stathopoulos, Ted, and Bert Blocken. "Pedestrian Wind Environment Around Tall Buildings." In Advanced Environmental Wind Engineering, 101–27. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55912-2_6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Stantchev, Vladimir, and Ralf Meyer. "Environmental Engineering and Facility Management of Berlin’s Public Buildings." In Information Technologies in Environmental Engineering, 91–104. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-88351-7_7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Li, Zhengrong, Shunyao Lu, Qun Zhao, and Fujian Jiang. "Asymmetrical Distribution of Solar Energy in Buildings with Glazing Facede." In Environmental Science and Engineering, 979–87. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9520-8_101.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Zhang, Tiantian, Meng Wang, and Hongxing Yang. "Energy Performance of a Building-Integrated Photovoltaic/Thermal System for Rural Residential Buildings in Cold Regions of China." In Environmental Science and Engineering, 847–56. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9528-4_86.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Yao, Mingyao, and Bin Zhao. "Distribution of Air Change Rates in Residential Buildings in Beijing, China." In Environmental Science and Engineering, 1149–56. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9520-8_119.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Li, Dongqian, Guojie Chen, and Qinghai Luo. "Numerical Simulation Analysis of Formaldehyde Pollution Control in Newly Decorated Buildings." In Environmental Science and Engineering, 513–22. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9520-8_54.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Xue, Junwei, Junliang Cao, Xiaoxin Man, Zhitao Han, and Jing Liu. "Research on the Air Infiltration under Thermal Pressure in Megatall Buildings." In Environmental Science and Engineering, 709–17. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9528-4_72.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Teixeira, Nuno, Luis Gomes, and Zita Vale. "Knowledge Retrieval Mechanism for Smart Buildings Based on IoT Devices Data." In Environmental Science and Engineering, 81–89. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-43559-1_8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Buildings Environmental engineering"

1

Jędrzejuk, Hanna, Maciej Jaworski, and Michał Chwieduk. "Methods for Improving Energy Performance of Single-family Buildings in Poland’s Climatic Conditions." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.261.

Texto completo da fonte
Resumo:
The effect of standard means of thermal upgrading of buildings on energy performance indices is studied in the paper. The following was considered: improving thermal performance of the envelope (walls, roof, floors over unheated cellars or ground-floor slabs, windows, and doors); using exterior blinds during heating and cooling seasons; using heat recovery (recuperation) in a forced ventilation system; reducing the ventilation air flow rate; and improving air-tightness of a building. The calculations were performed for a number of variants. Seven locations in Poland were selected based on outd
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Lapinskienė, Vilūnė, Violeta Motuzienė, Rasa Džiugaitė-Tumėnienė, and Rūta Mikučionienė. "Impact of Internal Heat Gains on Building’s Energy Performance." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.265.

Texto completo da fonte
Resumo:
Internal heat gains from occupants, equipment and lighting contribute a significant proportion of the heat gains in an office space. Usage of ICT in offices is growing; on the other hand, their efficiency is also improving all the time. Increasing energy efficiency in buildings have led to the situation, when new, well insulated office buildings, with high internal gains within the working hours may cover low heating energy demand. Such buildings, even in heating dominated countries, such as Lithuania, often also suffer from overheating during the winter heating season. The paper presents the
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Busko, Małgorzata. "Modernization of the Register of Land and Buildings with Reference to Entering Buildings into the Real Estate Cadastre in Poland." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.176.

Texto completo da fonte
Resumo:
Nowadays, it is frequently the case that the database of the real estate cadastre in Poland is not supplied with the record data on buildings. This study presents the issues related to the comprehensive modernization of the register of land and buildings, especially in the aspect of entering the buildings located in the areas of the modernized cadastral districts, into the database of the real estate cadastre. The real estate cadastre should provide a reference base for other public records, the data contained in the cadastre should be the basis, for example, for official statistics, real esta
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Gražulis, Žymantas, Boleslovas Krikštaponis, Algirdas Neseckas, Darius Popovas, Raimundas Putrimas, Dominykas Šlikas, and Evelina Zigmantienė. "The Horizontal Deformation Analysis of High-rise Buildings." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.194.

Texto completo da fonte
Resumo:
The horizontal deformation analysis of high-rise buildings, quite often is complicated because buildings like chimneys, towers and etc, have complex and asymmetric shapes, consequently there is not always the possibility to apply the method of single points motion analysis. Furthermore, the horizontal deformation analysis is complicated using standard measurement methods like measurements with electronic total stations or optical theodolites. In such case the terrestrial laser scanner could be superior to traditional measurements. However, the terrestrial laser scanner still not widely used to
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Borodinecs, Anatolijs, Jurgis Zemitis, Modris Dobelis, Maris Kalinka, and Aleksandrs Geikins. "Development of Prefabricated Modular Retrofitting Solution for Post-World War II Buildings." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.252.

Texto completo da fonte
Resumo:
Residential and public buildings are one of the essential energy consumers. The majority of European buildings were constructed within the period from mid-1950ies to the late 1990ies. Currently the retrofitting process is too slow. The main barriers are complicated retrofitting process, variety of available technologies as well as precision of estimated energy savings calculations. This paper is prepared in scope of work done within the European Regional Development Fund project “NEARLY ZERO ENERGY SOLUTIONS FOR UNCLASSIFIED BUILDINGS”. The main aim of this study is to develop full modular ret
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Moňoková, Andrea, Silvia Vilčeková, and Eva Krídlová Burdová. "Possibilities of Green Technologies Application in Building Design from Sustainability Dimensions." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.268.

Texto completo da fonte
Resumo:
The aim of this paper is to summarize knowledge of green technologies and their applications in buildings, as well as high performance green buildings. Two alternatives of family house design are performed. The first alternative uses conventional building materials and it doesn’t follow the sustainability principles. On the other hand, the second one is designed by using the environmentally friendly materials and with sustainability principles in mind. Designs of conventional and green family house are mutually compared from energy efficiency, embodied energy and greenhouse gas emissions such
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Nakielska, Magdalena, and Krzysztof Pawłowski. "Enhancement of Gravity Ventilation in Buildings." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.269.

Texto completo da fonte
Resumo:
Nowadays, people are looking for solutions related to ventilation, cooling or heat demand systems, which would be energy efficient and, at the same time, would not cause the degradation of the surrounding environment. As far as ventilation is concerned, an good solution is a natural ventilation, which improves thermal comfort rooms without increasing the consumption of electrical energy in the building. In order to improve the mode of action of the natural ventilation in the building, one can mount various elements supporting the air flow. One of them is a solar chimney. In order to check the
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Fořt, Jan, Magdaléna Doleželová, and Robert Černý. "Moisture Buffering Potential of Plasters for Energy Efficiency in Modern Buildings." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.254.

Texto completo da fonte
Resumo:
Moisture level significantly affects durability of constructions, their thermal performance and quality of indoor air. Since building envelopes are subjected to a moisture gradient, additional ventilation systems are employed to maintain relative humidity on the desired level. Although modern advanced ventilation systems provide sufficient air exchange rate, their wider application is in conflict with sustainability development principles due to high energy demands. Moreover, according to the European legislation related to the Nearly Zero Energy Buildings (European Directives 2002/91/EC and 2
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Turcsanyi, Peter, Anna Sedlakova, Eva Kridlova Burdova, and Silvia Vilcekova. "Environmental and Energy Assessment of a Family House." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.274.

Texto completo da fonte
Resumo:
Term energy efficient building is well know from year 1991, when Austrian physicist Dr. Feist designed and built first passive house, using current physical and practical knowledge. In the next 25 years buildings using principles of energy efficient design have changed dramatically. In a good way. It is mandatory for Slovak Republic as a part of European Union to act according European parliament directives. One of directives concerns lowering total energy consumption and emissions in the building sector – Directive 2010/31/EU on Energy performance of buildings, also known as Directive “20-20-
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

GRINEVIČIŪTĖ, Monika, and Kęstutis VALANČIUS. "Renewable and non-renewable primary energy factors for Lithuanian A++ buildings’ heating." In 12th International Conference “Environmental Engineering”. VILNIUS TECH, 2023. http://dx.doi.org/10.3846/enviro.2023.892.

Texto completo da fonte
Resumo:
Lithuanian A++ buildings are highly energy-efficient, but their heating systems still require energy to operate, and the type of energy used can have a significant impact on the environment. By considering both non-renewable and renewable primary energy sources, policymakers, builders, and building owners can make informed decisions about reducing carbon emissions, improving energy efficiency, and promoting sustainable energy use. This article examines the impact of different heating systems on primary energy (PE) consumption in buildings of different functions (single-dwelling residential bui
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Buildings Environmental engineering"

1

Johra, Hicham. Simple uncertainty budget and assessment with the Kragten method: Examples for building physics. Department of the Built Environment, 2024. http://dx.doi.org/10.54337/aau633631860.

Texto completo da fonte
Resumo:
The aim of this lecture note is to present and exemplify the Kragten method to calculate the combined uncertainty (uncertainty budget) of a measurand from the standard uncertainty estimates of individual inputs of that measurand, and the mathematical formulation of that measurand. If these two elements are not available, the Kragten method cannot be applied. The method also provides sensitivity (significance) assessment of the different components (inputs) in the combined uncertainty budget. The Kragten method for uncertainty calculation is very simple yet a robust and accurate alternative to
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Jung, Carina, Karl Indest, Matthew Carr, Richard Lance, Lyndsay Carrigee, and Kayla Clark. Properties and detectability of rogue synthetic biology (SynBio) products in complex matrices. Engineer Research and Development Center (U.S.), September 2022. http://dx.doi.org/10.21079/11681/45345.

Texto completo da fonte
Resumo:
Synthetic biology (SynBio) aims to rationally engineer or modify traits of an organism or integrate the behaviors of multiple organisms into a singular functional organism through advanced genetic engineering techniques. One objective of this research was to determine the environmental persistence of engineered DNA in the environment. To accomplish this goal, the environmental persistence of legacy engineered DNA building blocks were targeted that laid the foundation for SynBio product development and application giving rise to “post-use products.” These building blocks include genetic constru
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Markova, Oksana M., Serhiy O. Semerikov, Andrii M. Striuk, Hanna M. Shalatska, Pavlo P. Nechypurenko, and Vitaliy V. Tron. Implementation of cloud service models in training of future information technology specialists. [б. в.], September 2019. http://dx.doi.org/10.31812/123456789/3270.

Texto completo da fonte
Resumo:
Leading research directions are defined on the basis of self-analysis of the study results on the use of cloud technologies in training by employees of joint research laboratory “Сloud technologies in education” of Kryvyi Rih National University and Institute of Information Technology and Learning Aids of the NAES of Ukraine in 2009-2018: cloud learning technologies, cloud technologies of blended learning, cloud-oriented learning environments, cloud-oriented methodological systems of training, the provision of cloud-based educational services. The ways of implementation SaaS, PaaS, IaaS cloud
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Johra, Hicham. Project CleanTechBlock 2 Thermal conductivity measurement of cellular glass samples. Department of the Built Environment, Aalborg University, January 2019. http://dx.doi.org/10.54337/aau307323438.

Texto completo da fonte
Resumo:
The goal of the project CleanTechBlock 2 is to develop and test a durable and sustainable construction wall element which complies with the building regulations of 2020, and has a certain aesthetics attractiveness. The CleanTechBlock (CTB) prefabricated elements consist of cellular glass insulation blocks mounted in between two layers of brick masonry [1] [2]. The aim of this technical document is to report the results of the different experimental investigations performed on the CTB and other commercial cellular glass samples to determined their thermal conductivity. These experimental invest
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Nobile, F., Q. Ayoul-Guilmard, S. Ganesh, M. Nuñez, A. Kodakkal, C. Soriano, and R. Rossi. D6.5 Report on stochastic optimisation for wind engineering. Scipedia, 2022. http://dx.doi.org/10.23967/exaqute.2022.3.04.

Texto completo da fonte
Resumo:
This report presents the latest methods of optimisation under uncertainties investigated in the ExaQUte project, and their applications to problems related to civil and wind engineering. The measure of risk throughout the report is the conditional value at risk. First, the reference method is presented: the derivation of sensitivities of the risk measure; their accurate computation; and lastly, a practical optimisation algorithm with adaptive statistical estimation. Second, this method is directly applied to a nonlinear relaxation oscillator (FitzHugh–Nagumo model) with numerical experiments t
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Mosalam, Khalid, Amarnath Kasalanati, and Grace Kang. PEER Annual Report 2016. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, January 2017. http://dx.doi.org/10.55461/anra5954.

Texto completo da fonte
Resumo:
The Pacific Earthquake Engineering Research Center (PEER) is a multi-institutional research and education center with headquarters at the University of California, Berkeley. PEER’s mission is to develop, validate, and disseminate performance-based seismic design technologies for buildings and infrastructure to meet the diverse economic and safety needs of owners and society. The year 2016 began with a change of leadership at PEER. On January 1, Professor Khalid Mosalam became the new PEER Director as Professor Stephen Mahin completed his 6- year term. Also in early 2016, Dr. Yousef Bozorgnia s
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Bray, Jonathan, Ross Boulanger, Misko Cubrinovski, Kohji Tokimatsu, Steven Kramer, Thomas O'Rourke, Ellen Rathje, Russell Green, Peter Robertson, and Christine Beyzaei. U.S.—New Zealand— Japan International Workshop, Liquefaction-Induced Ground Movement Effects, University of California, Berkeley, California, 2-4 November 2016. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, March 2017. http://dx.doi.org/10.55461/gzzx9906.

Texto completo da fonte
Resumo:
There is much to learn from the recent New Zealand and Japan earthquakes. These earthquakes produced differing levels of liquefaction-induced ground movements that damaged buildings, bridges, and buried utilities. Along with the often spectacular observations of infrastructure damage, there were many cases where well-built facilities located in areas of liquefaction-induced ground failure were not damaged. Researchers are working on characterizing and learning from these observations of both poor and good performance. The “Liquefaction-Induced Ground Movements Effects” workshop provided an opp
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Ayoul-Guilmard, Q., F. Nobile, S. Ganesh, M. Nuñez, R. Tosi, C. Soriano, and R. Rosi. D5.5 Report on the application of multi-level Monte Carlo to wind engineering. Scipedia, 2022. http://dx.doi.org/10.23967/exaqute.2022.3.03.

Texto completo da fonte
Resumo:
We study the use of multi-level Monte Carlo methods for wind engineering. This report brings together methodological research on uncertainty quantification and work on target applications of the ExaQUte project in wind and civil engineering. First, a multi-level Monte Carlo for the estimation of the conditional value at risk and an adaptive algorithm are presented. Their reliability and performance are shown on the time-average of a non-linear oscillator and on the lift coefficient of an airfoil, with both preset and adaptively refined meshes. Then, we propose an adaptive multi-fidelity Monte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Panek and Young. PR-312-12208-R02 Limitations and Costs Associated with Raising Existing RICE Stack Heights. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), March 2014. http://dx.doi.org/10.55274/r0010556.

Texto completo da fonte
Resumo:
Modeling of actual and hypothetical compressor station facilities concluded increasing reciprocating engine stack height as one potential mitigation measure to reduce modeled impacts below the primary 1-hour NO2 National Ambient Air Quality Standards (NAAQS). Increasing stack heights to between 50-75 feet appears to offer considerable relief based on typical facility configurations (e.g., compressor house height, stack parameters). This white paper discusses potential stack design criteria to be considered when increasing existing exhaust stack heights or planning considerations for new units.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Bridges, Todd, Jeffrey King, Johnathan Simm, Michael Beck, Georganna Collins, Quirijn Lodder, and Ram Mohan. International Guidelines on Natural and Nature-Based Features for Flood Risk Management. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41946.

Texto completo da fonte
Resumo:
To deliver infrastructure that sustain our communities, economy, and environment, we must innovate, modernize, and even revolutionize our approach to infrastructure development. Change takes courage, but as one starts down the path of innovation, what was once novel becomes more familiar, more established. The U.S. Army Corps of Engineers (USACE) is walking this path with our partners through the Engineering With Nature (EWN) Initiative, integrating human engineering with natural systems. The International Guidelines on Natural and Nature-Based Features for Flood Risk Management are the next s
Estilos ABNT, Harvard, Vancouver, APA, etc.
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!