Teses / dissertações sobre o tema "Case frame construction"

If the author of the published paper digitizes such paper and releases it to third parties using digital media such as computer networks or CD-ROMs, the volume, number, and pages of the Journal of Natural Language Processing of the publication must be indicated in a clear manner for all viewers.
Kyoto University (京都大学)
0048
新制・課程博士
博士(情報学)
甲第19850号
情博第601号
新制||情||105(附属図書館)
32886
京都大学大学院情報学研究科知能情報学専攻
(主査)准教授 河原 大輔, 教授 黒橋 禎夫, 教授 河原 達也
学位規則第4条第1項該当

Decisions made at the early stage of building design can significantly influence theenvironmental, energy and economic performance of buildings. Future homeowners anddevelopers often have to make decisions concerning the design and specification of thebuilding. These choices are usually governed by functionality, aesthetics, cost, materialavailability, etc. Except for decisions related to long-term performances, they are relativelyeasy and straightforward to make. Long-term performance assessments that consider theimpact of a product over its lifetime, requires thorough research. Due to the lack of studies onthe long-term benefits and performance of different building design options, homeowners anddevelopers often base their decisions on short-term financial benefits, ignoring long-termbenefits. This may lead to incorrect decisions that are difficult to correct.Within this context, the aim of this study is to compare the long-term economic viability ofdifferent external timber wall construction types. By doing so, our goal is to address the lackof techno-economic studies within the construction industry and thus, to assist the decisionmakingof Swedish homeowners and developers. We evaluate the economic performance ofthree wooden wall construction alternatives—that of IsoTimber, cross-laminated timber(CLT), and timber frame walls—via thirteen wall assembly scenarios and two case housesfrom Bysjöstrand eco-village, Sweden. The scenarios account for variations in wall type andwall thicknesses. Our study utilizes an approach based on life cycle costing (LCC) andconsiders the capital cost and the present value of heating cost. The latter is calculated for 1m2of heated area of each case houses over a 40-year period. Indoor Climate and Energy software(IDA ICE) is used to estimate the heating energy use and the Bidcon program to estimate thematerials and labor costs for all cases. The study considered reasonable economic parameters,but to see their impact on the results and feasibility of wall constructions improving, sensitiveanalysis has been done using different values.The main finding of this thesis is that timber frame wall construction is the most economicchoice in the long term. In contrast, IsoTimber wall is the least economic choice, in general,and for two-story homes, in particular. Moreover, the present value total cost for IsoTimber intwo-story building is 5% higher than for a single-story building that has a similar U-value. Incontrast, it is 3% and 7% lower for CLT and timber frame walls respectively. Also, the resultsindicate that although the present value heating cost decreases with increasing wall thickness,this increase is considerably smaller than the increase in the capital cost. Finally, assumedeconomic factors affect the results greatly, but in general, improving the U-value of CLT wallconstruction might be the most profitable then timber frame comes after, and then IsoTimbercomes in the last. Along with, return economic benefit from the improvement of all studiedwall constructions in single-story building is higher than the benefit in two-story building.

Kyoto University (京都大学)
0048
新制・課程博士
博士(情報学)
甲第11842号
情博第171号
新制||情||38(附属図書館)
23602
UT51-2005-K508
京都大学大学院情報学研究科知能情報学専攻
(主査)教授 松山 隆司, 教授 河原 達也, 助教授 佐藤 理史
学位規則第4条第1項該当

From January 2016 until August 2021, at least 436 women or girls have been deliberately murdered in Spain by men. Non-intimate femicide (and, particularly, murder committed by complete strangers to the victim, to which this study refers as “stranger femicide”) has historically been, and still is, the most covered type of femicide in the media. This is also the case in the Spanish press, and more specifically, El País, the most read media outlet in the country. This thesis examines how El País framed Diana Quer’s case, the most high-profile, intensively covered femicide case in Spain in the past 5 years. It will also examine which ethical problems the reporting presented. From a feminist perspective and through a mixed-method approach of content analysis and frame analysis, this study examines 86 articles corresponding to the two informative peaks of Diana Quer’s case coverage. The periods go from August to October 2016, the first two months of her disappearance, and from December 2017 to January 2018, the 15 days following her killer’s arrest and crime confession. The findings reveal that the coverage in El País constructed a victimization iconography with DQ’s case that engendered cautionary tales and failed to address femicide as a social issue. The reporting also presented a series of critical ethical problems calling for a reformation of femicide reporting guidelines.

La période entre 338 et 290 av. J.-C. fut un tournant pour Rome, car elle vit la soumission des Latins et la défaite des Samnites, ce qui permit à l’Urbs de devenir la première puissance italique. On assista donc à l’avènement d’un impérialisme romain. Se pose alors la question de l’idéologie d’État de cette Rome en transition. Comme cette expansion fut accompagnée par la construction, à Rome, de dix nouveaux temples, souvent dédiés à des divinités nouvelles, et que toute divinité exprimait une idéologie, il nous a semblé possible de reconstituer, dans ses grands traits, cette idéologie d’État grâce aux nouvelles divinités et leurs sanctuaires. Nous avons donc choisi d’analyser deux nouveaux temples : celui de Quirinus et celui de Victoria. Le choix de Quirinus s’explique par le fait que ce dieu avait, on l’a montré, déjà été assimilé à Romulus ; quant à Victoria, on l’a choisie pour trois raisons : elle était une déesse de la victoire ; son temple fut élevé au-Dessus du Lupercal, au cœur même de la « Rome de Romulus » ; grâce aux fouilles de P. Pensabene, on peut reconstituer son sanctuaire. Puis, on a analysé les deux temples et leurs divinités à travers les concepts (cadre social de la mémoire, mémoire collective) issus de la sociologie de M. Halbwachs. On a ainsi constaté qu’à travers ces temples, l’élite dirigeante avait diffusé auprès du peuple une nouvelle identité collective affirmant le caractère exceptionnel de Rome et contenant l’idée d’une expansion illimitée de l’Urbs. Cette création d’une identité romaine impérialiste se fondant sur Romulus et la religion en général, on peut l’interpréter comme la construction d’un destin collectif pour Rome
The period between 338 and 290 B.C. saw a sea change for Rome, because the subjugation of the Latins and the defeat of the Samnites allowed her to become the main italic power, and witnessed the advent of a roman imperialism. In this context arises the problem of the state ideology of this Rome in transition. As this expansion was accompanied by the construction of ten new temples in Rome, frequently consecrated to new deities, each of them expressing a specific ideology, we thought it possible to reconstruct the new state ideology through an analysis of the deities and shrines in question. So, for our study, we chose two new temples, those of Quirinus and of Victoria. Quirinus because of his assimilation to Romulus, Victoria because she was a deity of victory; her shrine was built above the Lupercal, at the heart of the “Rome of Romulus”; and because her temple can be reconstructed thanks to the excavations of P. Pensabene. Then we analyzed the two temples and their godheads through concepts (social frame of memory; collective memory) taken from the sociology of M. Halbwachs. In this way we came to the conclusion that, through these two shrines, the ruling élite had tried to communicate to the common people a new collective identity promoting the exceptionality of Rome and her unlimited powers of expansion. This construction of an imperialistic roman identity being based on Romulus and the religion in general, one can interpret it as construction of a collective destiny for Rome

The subject of this final thesis is the building technological project of the library on the street of Kravi hora in the Brno. The final thesis includes a technical report, a coordination situation, a situation of the construction with wider relations with transport route links, a time schedule and financial plan of the construction, a site equipment project, a design of the main machines and mechanisms, a time schedule of the main building object, a supply plan and a plan for transport routes, a technological regulation for cast-in-place floor structure, a control and test plan, a health and safety plan at work on a construction site binding for a carcass, an itemized budget for carcass, a comparison of the solutions for realization of the cast-in-place floor structure and the technological regulation for technology of capture of rainwater for further use.

The subject of my diploma thesis are selected parts of the construction technology project of the psychiatric clinic of the University Hospital Brno based on the provided project documentation. It is an extension of a new six-storey building to the existing buildings. The thesis contains a technical report to the construction technology project, the coordination situation of the construction, the situation of wider transport routes, time and financial plan by objects, study of the realization of the main technological stages, a site equipment design, a design of a machine set, technological regulation for monolithic structures, quality control and testing plan of monolithic structures, noise study and selected documents for LEED certification.

The main contens of the thesis is solving a construction-technological project substructure and the upper shell construction of a polyfunctional building in Pardubice. Excavation and foundation work are done in section A and B1 and B2. Drilled piles are foundation of a polyfunctional building. Drilled piles are support of reinforced concrete grillage, which are from strips foundation and foundation pads. Cast-in-place concrete frame is a form of load-bearing structure, which contens plate ceilings, pillars and walls. Peripheral masonry is from hellow clay blocks, which are between cast-in-place concrete frame. Diploma thesis includes technical report, plan of building side, schedule and the budget of the building, technological instructions, radon prevent, control and testing plan, safety, balance resources, selected constructional details, machinery composition, bill of quantities.

Support verb constructions (henceforth: SVCs) are constructions consisting of a verb with a reduced meaning (when compared to the full verb) and a noun. Previous analyses (e.g. von Polenz 1963, Winhart 2002) provide a detailed account of the function of the verb in SVCs. However, neither of the two approaches fully explains why certain verb-noun combinations are unacceptable. Geraten ('to get into') can combine with Brand ('fire') in but not with Feuer ('fire') even though the two nouns are synonyms. This dissertation proposes a novel approach towards identifying selectional restrictions in German support verb constructions by applying insights from Frame Semantics (Fillmore 1985) and Construction Grammar. It differs from syntactic-centric and lexical-conceptual structure approaches in that frame-semantic information is shown to directly influence a verb's and a noun's ability to combine with each other. I argue that the nominalization Feuer cannot combine with the support verb because the frame- semantic information evoked by Feuer is incompatible with the frame semantics of geraten. Thus, either the verb and/or the noun blocks the formation of a support verb construction. My analysis demonstrates that in order for the support verb and the noun to be able to combine, their frame-semantic information needs to be compatible. However, in some circumstances SVCs need to be listed as idioms in the lexicon because there do not seem to be any compositional restrictions that allow geraten to combine with Brand ('fire'), but not Feuer ('fire'). Based on a corpus of more than 1000 SVCs with geraten, I show that there are different patterns of productivity and idomaticity. Some SVCs, such as ins Rollen geraten ('to start rolling'), allow widespread replacement of the noun with near-synonyms. Other SVCs, such as in Brand geraten ('starting to burn'), do not allow such replacement. In this view, both the abstract meaning of an SVC (e.g., in X geraten 'to get into X') and item-specific knowledge needs to be captured to be able to account for the full range of SVCs headed by geraten. Therefore, I posit a new construction that captures all the meanings expressed by SVCs with geraten.
text

碩士
國立交通大學
外國文學與語言學研究所
94
ABSTRACT This thesis aims to investigate the frame semantics of three frame-evoking Mandarin verbs, including WAN, NONG, and GAO, in the [V+NP] construction. The thesis tries to avoid following the old fashion on the lexical semantic study, so it retrieves data from the Sinica Corpus and discusses some cases in which traditional lexical semantic studies took on the V-O pattern. Moreover, it follows the most popular Construction Grammar to demonstrate the constructional interpretation of the [V+NP] construction that these three verbs embedded. Consequently, comparing with the traditional approach applied in this field, immense progress made by Construction Grammar is beyond our expectation. First of all, this thesis gathers some background knowledge about the frame semantics, and then adapts Construction Grammar on the frame semantic study of [V+NP]. Since, as far as these three verbal predicates are concerned, the object-NPs bear quite a few semantic types in the semantic domain, it is impossible for human beings to remember all meanings of each V-O pattern. That is, there are not enough neurons in our brain to deal with all of the linguistic noise. Therefore, when we use the frame-oriented verbal predicate to set a frame, we can easily acquire the semantic denotation hidden in the opaque episode undertaken. Namely, the form-meaning composition provides a proper sense for the construction per se. Hence, the semantic features are easily to be acquired. Second, this thesis also compares the traditional lexical semantic studies with the approach of Construction Grammar. We can find that the semantic description of the V-O pattern in the old fashion is not convincing, because object-NPs are with diverse semantic types, such as airplanes, women, Taiwan Independence, unification and so on. They are not just combined with GAO ‘do/make’ and then render a proper reading for the V-O pattern. Besides, the sense of the opaque event would not be the combination of the derivational parts of the V-O pattern. In consequence, we suggest that only Construction Grammar can demonstrate the most elaborate constructional interpretation inferred from the compositionality of the syntactic form and the semantic frame. Third, on the base of Construction Grammar, this thesis not only uses metalanguage to interpret the vague event, but also retrieves the semantic components from the whole construction. In other words, this thesis postulates: although these three verbs are not full fledged pro-verbs in some cases, they behave like pro-verbs that they are ‘super-lexical’ morphemes and act differently from other predicates which just render a situation type for the event. For example, the frame-evoking verbs may change the situation type of an activity into a resultative state, or imply that the speaker takes business as an informal event in a rather pejorative tone. Accordingly, these verbs are probably to take over some verbs with the identical semantic features in a certain context. Lastly, even though there are bunches of merits in Construction Grammar, we may not read an ambiguous pattern in a context. However, Qualia Structure has a killer-usage to distinguish the ambiguity undertaken in the [V+NP] construction. Since there are four idiosyncratic qualia roles that can be used to determine the main idea of the object-NP, then we can easily decipher the encoded reading of the construction.

碩士
國立政治大學
語言學研究所
91
The English verb take attests a wide range of meanings and provides rich resources for the exploration of polysemy. Attempting to examine how the various senses of take are related to one another, this thesis investigates the meaning relatedness under the framework of Frame Semantics, which postulates that a conceptual representation is required to fully capture verb semantics (Fillmore and Atkins 1992, 2000), and Construction Grammar, which holds that constructions found in language are the basic units of language and that verb semantics interacts with constructions, thus yielding different meanings (Goldberg 1995, Jackendoff 1997). A careful examination of data reveals that take derives a variety of senses both from its interaction with the semantics of other components in the constructions and from different windowings of take’s conceptual frame. When integrated with the Caused-Affected Construction, the take construction acquires the senses of choosing, grabbing, consuming, and changing. When integrated with the Caused-Motion Construction, the take construction is found to be prototypically followed by prepositional phrases exhibiting seven semantic functions. When occurring in less prototypical cases of the Caused-Motion Construction, the meaning of the take construction blends into the meaning of the preposition following right behind it.

Building Information Modeling (BIM) is the comprehensive process of developing a computer model of a building project in the phases of designing, analyzing, building, managing, refurbishing and even demolishing the building. Applying BIM to public construction has become an obligation in South Korea. According to the Public Procurement Service in South Korea, the use of BIM has been compulsory on all government projects over $44M since 2012. Moreover, from 2013, the application of BIM will be expanded to all public construction projects over $27.6M. Finally, beginning in 2016, all public construction projects will be required to use BIM. Most research on BIM in South Korea has been focused on developing regulations and policies, application of BIM, solving technical problems, and searching for the value of BIM. However, the use of BIM in Korea during construction for decision-making has not been thoroughly reported in Korea yet. One may be wondering then if BIM is indeed well utilized in Korea during construction for practical decision-making. The objective of this research centers on investigating how a construction company in South Korea is using BIM for its decision making process during ongoing construction phases. For this investigation, a case study method was used. The construction operations on a jobsite in South Korea were monitored June to August in 2012. Field notes were taken to document the decision-making process and information used during field coordination meetings. A total of 36 cases were monitored and recorded. The use of BIM on field was then compared to the industry expectations indicated in the literature. Specifically, the use of BIM for scheduling, estimating, coordination, review of drawings, and tracking for change orders were carefully monitored and compared with the industry expectations as they were addressed in the literature. The results of this research study were mixed. That is, there are not only similarities, but also differences between BIM’s role used for decision making at the construction site, and its expected role described in previous research. The similarities were regarded as minimizing reworking. This factor came to fruition at a construction site by minimizing error, omission in design phases, or congruence in design and construction tasks. These factors could have a positive effect on estimating and scheduling at a construction site. However, use of BIM at a construction site was still limited in reducing repetitive work when 2D drawings were not able to provide enough information to conduct construction. Additionally, even though this study was successful in revealing the connection between the decision making process and the application of BIM at a construction site, the results of the study may not be generalizable to the construction industry as a whole in South Korea. Therefore, further research is needed to ensure its applicability to other construction projects.