Conecte-se

Bibliografias temáticas / Colored PV

Índice

Artigos de revistas
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Colored PV"

Autor: Grafiati

Publicado: 16 de outubro de 2023

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Colored PV".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Colored PV"

1

Abdulmunem, Abdulmunem R., Abdullateef A. Jadallah, Hisham A. Hoshi e Mohammed H. Jabal. "Effect of Colored Filters on PV Panels Temperature and Performance under Baghdad Meteorological Condition". Tikrit Journal of Engineering Sciences 25, n.º 4 (15 de dezembro de 2018): 45–49. http://dx.doi.org/10.25130/tjes.25.4.08.

Texto completo da fonte

Resumo:

In this work, the influence of colors of filters upon the photovoltaic panels rising temperature and electrical performance was studied under Baghdad Meteorological Condition. Basing on the energy analysis of a photovoltaic solar system and by using the photonic theory, the available energy on the PV plane system has been evaluated. Seven colored filters each with (85W) PV modules were used in this case study, to reveal the impact of colored filters upon the electrical productivity of PV panel with the variation in the temperature caused by these filters. There is the main issue of this work is to show how the performance of PV module by imposing colored filter and hence how and to how much improve it by reducing the cell temperature in hot climate. Outcomes showed that the PV technology is affected by the color filters. In other words, red filter gives light have least photons energy, and violet filter gives light have the most photons energy and green is between the two. So, red colors filter gives highest PV panel temperature comparative with others filters, while violet color filter was the lowest. PV module with the lowest temperature colored filter gives the best electrical performance than others.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Song, Hyung-Jun, e Hyunho Lee. "Colored Photovoltaics via Printing Technology". Journal of Flexible and Printed Electronics 1, n.º 1 (agosto de 2022): 29–44. http://dx.doi.org/10.56767/jfpe.2022.1.1.29.

Texto completo da fonte

Resumo:

Building integrated photovoltaic (BIPV) plays an essential role in realizing net-zero energy buildings. Unlike utility-scale photovoltaic (PV) power plants, the aesthetic of BIPV is a crucial issue for entering the market. Therefore, the demand for colored PV increases rapidly to fulfilling the increased energy consumption in an urban area. In this review, we would like to introduce the current status of colored PVs and four dominant printing-based approaches for demonstrating them. First, the Fabry-Perot filter, controlling the device's thickness, intensifies the PVs' color. Secondly, bandgap engineering of the light-absorbing layer enables us to generate a color by transmitting a specific range of incident light. Third, the selective layer, multiple stack of two dielectric layer, provides color to PVs. Lastly, the printing of luminophore on the top of PVs makes them colorful by converting high energy photons to visible ones. The progress of colored PV technology will help PVs enter into BIPV market by providing an aesthetic view to them.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Hategan, Sergiu-Mihai, e Marius Paulescu. "Spectral Factor of Colored Solar Cells: A Case Study on the Main Urban Areas in Romania". International Journal of Photoenergy 2022 (27 de agosto de 2022): 1–7. http://dx.doi.org/10.1155/2022/8494818.

Texto completo da fonte

Resumo:

PV modules for Building-Integrated Photovoltaic (BIPV) applications are made of different colors aimed at raising the visual aesthetic of the building. But a colored coating applied to the surface of a basic PV module is inherently associated to a decrease in conversion efficiency. From a different perspective, the efficiency of a PV module is evaluated under the industry standard test conditions (STC). Due to spectral mismatch, the efficiency of a PV module operating in outdoor conditions may substantially differ from the standard value evaluated at STC. In this study, the influence of spectral solar irradiance distribution on the colored PV module efficiency is evaluated in terms of spectral factor (SF). SF quantifies the relative power gain or loss caused by the spectral difference from STC. The theory is illustrated with a case study on the main four urban areas in Romania. The actual solar radiation spectrum is estimated with the simple Leckner spectral solar irradiance model, based on atmospheric parameters retrieved from the Aerosol Robotic Network (AERONET). The results emphasize that the aesthetic of BIPV comes at a high energy cost: depending on the color, a coating applied on the surface of a crystalline silicon PV module may reduce its conversion efficiency even by half.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Njok, A. O., J. C. Ogbulezie e N. A. Akonjom. "Evaluation of the Performance of Photovoltaic System under different Wavelengths from Artificial Light in a Controlled Environment". Journal of Applied Sciences and Environmental Management 26, n.º 6 (30 de junho de 2022): 1015–20. http://dx.doi.org/10.4314/jasem.v26i6.4.

Texto completo da fonte

Resumo:

Photovoltaics cell behave in a unique way when light falls on it. The objective of this work is to evaluate the performance of photovoltaic system under different wavelengths from artificial light in a controlled environment. Measurements were first taken from the PV module in the absence of the filters, followed by each filter been placed individually and measurement taken correspondingly. From the results obtained the PV module was most efficient when the yellow colored filter was employed and least efficient with the blue filter (revealing a difference of 2% in efficiency between them). Nevertheless, the photovoltaic module surpassed the efficiencies reached with the application of the colored filters when left open to the natural spectrum.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Okoth, Michael, Joseph Aloo e Jasper Imungi. "Storage Stability of Refined Oil From Lake Victoria Nile Perch (Lates Niliticus) Viscera". Current Research in Nutrition and Food Science Journal 3, n.º 3 (23 de dezembro de 2015): 237–42. http://dx.doi.org/10.12944/crnfsj.3.3.07.

Texto completo da fonte

Resumo:

Nile perch (Lates niloticus) viscera oil was extracted by wet rendering method and refined by neutralization, deodorization and winterization. After winterization, the oil was decanted and separated by filtration into a low melting point fraction (LMPF) and a high melting point fraction (HMPF). The two fractions were used to carry out storage stability study. Each fraction was stored at room temperature (19 – 23oC) for a period of 20 weeks in transparent and amber colored glass containers. The oil fractions were subjected to quality tests to assess their storage stability. The effects of package color and storage duration were assessed by analyzing for the content of free fatty acids (FFA) as oleic acid and the peroxide value (PV) at the beginning of storage and at intervals of two weeks during storage. The resulting data were subjected to statistical analysis (p ≤ 0.05) using GenStat software, 13th edition. There was a general increase in FFA and PV, with significant differences between oil fractions and package color over storage time. For FFA, there was no interaction between the oil fraction and package color while for PV there was significant interaction between the oil fraction and package color. FFA increased from 0.26% to 0.59% for LMPF in clear package, 0.26 – 0.43% for LMPF in red package, 0.22 – 0.85% for HMPF in clear package, and 0.22 – 0.69% for HMPF in red package. PV increased from 0.50 mEq O2/kg oil to 11.65 mEq O2/kg oil for LMPF in clear package, from 0.5058 mEq O2/kg oil to 10.58 mEq O2/kg oil for LMPF in red package, from 1.01 mEq O2/kg oil to 9.94 mEq O2/kg oil for HMPF in clear package, after 20 weeks, and from 1.01 mEq O2/kg oil – 6.86 mEq O2/kg oil for HMPF in red package after 14 weeks. The levels of FFA and PV of LMPF in colored package remained within the CODEX limits of 0.3% and 5 mEq O2/kg oil respectively for refined fish oils up to 18 weeks. The FFA of HMPF surpassed the limit after 6 and 10 weeks for transparent and colored packages respectively. The FFA of LMPF in transparent package surpassed the limit after 8 weeks. Only low melting point oil fraction in transparent pack had PV above limit at 18 weeks. Results showed that colored package is more suitable for both oil fractions studied. In terms of FFA and PV, HMPF and LMPF can retain good quality at ambient temperatures for 10 and 18 weeks respectively.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Basher, Mohammad Khairul, Mohammad Nur-E-Alam, Md Momtazur Rahman, Steven Hinckley e Kamal Alameh. "Design, Development, and Characterization of Highly Efficient Colored Photovoltaic Module for Sustainable Buildings Applications". Sustainability 14, n.º 7 (4 de abril de 2022): 4278. http://dx.doi.org/10.3390/su14074278.

Texto completo da fonte

Resumo:

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our newly developed MPCPV module exhibits an aesthetically attractive and flexible building color suitable for industrial application. Furthermore, the MPCPV module possesses an efficiency of 9.6%, which is 4.1% higher than a single-color PV module (5.5%) but closer to conventional thin-film PV modules. In addition, the other output parameters, such as short-circuit current (Isc), open-circuit voltage (Voc), maximum power (Pmax), and fill factor (FF), indicate that our developed colored PV module is suitable for modern infrastructures that will enable energy generation on-site without compromising the aesthetic appearance. Finally, this research will have a substantial influence on the NZEB and will play an important part in the development of a sustainable environment.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Saw, Min Hsian, Jai Prakash Singh, Yan Wang, Karl Erik Birgersson e Yong Sheng Khoo. "Electrical Performance Study of Colored c-Si Building-Integrated PV Modules". IEEE Journal of Photovoltaics 10, n.º 4 (julho de 2020): 1027–34. http://dx.doi.org/10.1109/jphotov.2020.2981820.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Habets, R., Z. Vroon, B. Erich, N. Meulendijks, D. Mann e P. Buskens. "Structural color coatings for high performance BIPV". IOP Conference Series: Earth and Environmental Science 855, n.º 1 (1 de outubro de 2021): 012011. http://dx.doi.org/10.1088/1755-1315/855/1/012011.

Texto completo da fonte

Resumo:

Abstract Building integrated photovoltaics (BIPV) offer aesthetics and freedom of design for architects and home owners. This can accelerate implementation and free up new spaces for solar energy harvesting at building level, which is a necessary step towards a climate neutral built environment. Colored solar panels with high conversion efficiency and low cost price are an important development for large scale market penetration of BIPV. Here we report a solution processed structural color coating for solar panels and solar collectors. We show that virtually any color can be prepared, that the desired coating stack can be designed using optical calculations and that the exact color can be produced via a low cost solution process. Furthermore, we show that the light transmission for the colored glass plates is still very high, exceeding commonly used absorbing colors and enables very high solar cell efficiency. The colored PV panels have been tested in real environment and via accelerated lifetime testing for 3 years without any performance decline or degradation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Kazem, Hussein A., e Miqdam T. Chaichan. "The Impact of Using Solar Colored Filters to Cover the PV Panel in Its Outcomes". Scholars Bulletin 2, n.º 7 (julho de 2016): 464–69. http://dx.doi.org/10.21276/sb.2016.2.7.5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Riedel, Benjamin, Paul Messaoudi, Ya Brigitte Assoa, Philippe Thony, Rayan Hammoud, Laure-Emmanuelle Perret-Aebi e John A. Tsanakas. "Color coated glazing for next generation BIPV: performance vs aesthetics". EPJ Photovoltaics 12 (2021): 11. http://dx.doi.org/10.1051/epjpv/2021012.

Texto completo da fonte

Resumo:

Through the H2020 BE-SMART project, we work on the validation and industrialization of new materials (and processes) for manufacturing next-generation cost-efficient, reliable and highly aesthetic/performing BIPV. On this basis, we aim at introducing novel multifunctional and transformative BIPV elements, in the concept/form of Energy Positive Glazing (EPoG). The project's developments so far indicate the high potential of e.g. using colored encapsulants, interferential filter technique and/or ceramic-based colored glazing for implementing novel “transformative” BIPV with high aesthetic quality. Yet, since BIPV's primary function is electricity production, we need to understand and quantify the impact of such coloration solutions on the performance (and reliability, in longer terms) of future BIPV. In this paper, we present an experimental comparative study on the optical and electrical performance of multiple color coated and patterned BIPV glazing solutions, towards their upscaling and commercialization. In particular, we performed optical transmission measurements and light intensity-/angle-depent IV characterization on 25 different colored glass samples and 10 different colored/patterned glass PV laminates respectively. The measurement results and their discussion presented in this paper provide valuable insights into the optical-electrical performance of the investigated colored BIPV glazing, as well as a first identification of BIPV industry-relevant colors and patterns with the best potential “compromise” between aesthetics and performance, for future energy positive glazing applications.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Colored PV"

1

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Thornton, John Preston. PV-related utility activities in Colorado. [Golden, CO: National Renewable Energy Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Capítulos de livros sobre o assunto "Colored PV"

1

Masseck, Torsten, S. A. Schottibérica e S. A. Vidursolar. "Innovative Transparent, Colored Pv-Modules for the Builidng Integration in Spain". In Proceedings of ISES World Congress 2007 (Vol. I – Vol. V), 373–77. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-75997-3_64.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Colored PV"

1

Guo, L. Jay. "Colored ultra-thin hybrid photovoltaics with high quantum efficiency for decorative PV applications (Presentation Recording)". In SPIE Organic Photonics + Electronics, editado por Zakya H. Kafafi, Paul A. Lane e Ifor D. W. Samuel. SPIE, 2015. http://dx.doi.org/10.1117/12.2191612.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Lisco, F., G. Cattaneo, A. Virtuani, N. Aste, C. Del Pero, F. Leonforte, M. Despeisse, C. Ballif e A. Miglioli. "Design and testing of a demonstrative BIPV façade manufactured with novel glass-free colored lightweight PV modules". In 2023 International Conference on Clean Electrical Power (ICCEP). IEEE, 2023. http://dx.doi.org/10.1109/iccep57914.2023.10247449.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Wilson, Eric J. H., e John J. Burkhardt. "Cost-Effectiveness of a Photovoltaic-Powered Heat Pump Water Heating System vs. Solar Thermal Water Heating". In ASME 2009 3rd International Conference on Energy Sustainability collocated with the Heat Transfer and InterPACK09 Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/es2009-90238.

Texto completo da fonte

Resumo:

The cost-effectiveness of a photovoltaic (PV) powered heat pump water heater (HPWH) system is compared to that of a traditional solar thermal water heating system. HPWH evaporators are most often located inside the conditioned building space, resulting in a year-round cooling effect in the building. This effect is beneficial during the cooling season but detrimental during the heating season. The significance of this cooling effect was evaluated as part of the life cycle cost (LCC) analysis of the PV-powered HPWH system. Four different locations were considered: Boulder, CO; Miami, FL; Chicago, IL; and Seattle, WA. For the solar thermal analysis, both electric resistance and gas-fired auxiliary water heating scenarios were considered. Life cycle costs for the PV-HPWH system were calculated for the case of a PV system dedicated to providing electricity for the HPWH, and for the case of a previously planned residential PV system being increased in size to accommodate the HPWH. This latter case uses a lower, incremental cost of increasing the size of the PV system. The most notable results of the analysis are summarized below: • In general, the solar thermal system is more cost effective than the PV-HPWH system, even using the incremental cost of increasing the size of a planned PV system. • In locations where there are incentives that apply to PV but not solar thermal systems, as in much of Colorado, the PV-HPWH system will be more cost-effective than solar thermal. • The cooling effect of the HPWH evaporator is a net benefit in Miami, FL, but a net penalty in the other three locations. • The PV-HPWH system becomes more cost-effective than solar thermal with gas auxiliary in Miami when the price of natural gas is increased from $1 to $1.50 per therm. • Increasing the price of gas in the other locations does not make the PV-HPWH system compete against solar thermal because the cooling effect penalty also increases with the price of natural gas.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Bläsi, Benedikt, Tom Kroyer, Oliver Höhn, Claudio Ferrara e Tilmann E. Kuhn. "Coloured Module Glass for BIPV inspired by Morpho Butterfly". In Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/pv.2016.pw5a.2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Krarti, Moncef. "The Economic and Environmental Benefits From Distributed PV and Wind Technologies in a Colorado Community". In ASME 2015 9th International Conference on Energy Sustainability collocated with the ASME 2015 Power Conference, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/es2015-49130.

Texto completo da fonte

Resumo:

This paper presents the results from an economic and environmental feasibility study on photovoltaic PV and wind technologies for a community of 200 homes in Superior, CO. The electrical load profile assumed for the community, the solar resources available, and the wind resources are defined. Specific PV modules and wind turbines are identified. A simulation model was created in HOMER software and the specific model assumptions and reasoning presented. The results of the simulation show that the baseline scenario of grid electricity use is the best economic decision under the status quo system parameters. However, it is shown through sensitivity analyses and requirements for specific levels of renewable energy use, that the best possible system for the community should not be evaluated solely on the status quo economic parameters. PV is shown to be the best renewable technology to consider while wind energy proves to be a poor choice for the specific location of the community. Emissions of CO2 and other pollutants are greatly reduced under the recommended system design.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Lee, Kenneth K., e Jared T. Moore. "Configuration Optimization of a Photovoltaic Power Plant in Relation to Cost and Performance". In ASME 2010 4th International Conference on Energy Sustainability. ASMEDC, 2010. http://dx.doi.org/10.1115/es2010-90269.

Texto completo da fonte

Resumo:

The purpose of this paper is to examine the economic benefits of single-axis tracking photovoltaic (PV) power plants for a variety of locations with varying solar resources. Although the photovoltaic industry has been around for decades, the industry has changed dramatically in the past few years. A confluence of overproduction of panels and an economic recession have caused a precipitous drop in panel prices. Additionally, as tracking systems have matured, they have become more acceptable — technically and economically. With all these changes, it is not clear today if and where tracking is appropriate. This paper is to gauge the difference between a tracking and non-tracking configuration of a PV plant. For the purpose of this study, a net 20 MW alternating current (AC) PV plant was assumed to be developed at three different locations: California, Colorado, and New Jersey. The same panel of a moderate efficiency was picked and was used at each site. While a panel is not usually decided before development, a panel of typical characteristics was chosen so that prospective panels’ costs and efficiency could be assessed concerning tracking using a qualitative analysis. Levelized cost of energy (LCOE) of each site was determined using the Life-Cycle Cost Analysis methodology. For fixed mounting structures, the tilt of the panel was optimized based on the respective weather conditions to maximize production. After the tilt was decided, an economic sensitivity study taking shading and land prices into account was used to find the most economical spacing between mounting structures. For tracking, horizontal single axis tracking was assumed, and spacing was optimized as described above. The results of the study show that the benefit of tracking increases with the strength of the solar resource. In Newark, New Jersey, tracking raised the LCOE. In Daggett, California, tracking lowered the LCOE. In Boulder Colorado, the difference in LCOE was not appreciable. The study also showed that the most economical fixed PV power plant used less land on a capacity basis at each site. However, tracking plants, regardless of location or solar resources, produced more energy (kWh) per acre of land and could be described as more efficient on a land use basis.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

McIntosh, Keith R., Mohamed Amara, Fabien Mandorlo, Malcolm D. Abbott e Benjamin A. Sudbury. "Advanced simulation of a PV module’s color". In SILICONPV 2018, THE 8TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS. Author(s), 2018. http://dx.doi.org/10.1063/1.5049256.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Kim, Wan-Chin. "Optical Layout Design for Minimizing Periodical Image Noise in Color Printing System". In ASME-JSME 2018 Joint International Conference on Information Storage and Processing Systems and Micromechatronics for Information and Precision Equipment. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/isps-mipe2018-8532.

Texto completo da fonte

Resumo:

In this study, we present a sync detection optical layout that can reduce the periodic noise of the color printing system. A color printing system which applies tandem type laser scanning unit exposes light onto four photo conductive drums using four laser diodes and a single polygon mirror (PM). In order to reduce the image moire caused by the periodic noise of the shape error of the PM according to the color superposition method, optical analysis on various shape errors of the polygon mirror was performed. In this study, we propose a sync detection layout which can solve the color moire caused by peak-to-valley (PV) shape error of polygonal mirror surface.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Ibrahim, Nagwa Ibrahim, e Manahil Mohammed Baher Edin Omer. "The Effect of Wavelength of Light on Solar Electrical Performance". In ASME 2020 Power Conference collocated with the 2020 International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/power2020-16096.

Texto completo da fonte

Resumo:

Abstract The photovoltaic effect takes place at the junction of two semiconducting materials. The relation between energy (E) of light (photons) and wavelength (lambda) is given the energy of the incident photons is inversely proportional to their wavelengths. Violet is the Short-wavelength radiation, occupy the end of the electromagnetic spectrum which includes ultraviolet radiation and gamma rays. On the other hand, long-wavelength radiation occupies the red end and includes infrared radiation, microwaves, and radio waves. The wavelengths of visible light occur between 400 and 700 nm, so the bandwidth wavelength for silicon solar cells is in the very near-infrared range. Any radiation with a longer wavelength, such as microwaves and radio waves, lacks the energy to produce, electricity from a solar cell. The cost-efficiency of photovoltaic solar panels maybe reducing by reflection losses is a major field of study in the solar glass market. The color from glass cover is an important factor for the performance of photovoltaic panels as it can turn out to be an active component in the design of PV panels. Indeed, different glass covers perform very differently under direct and diffuse radiance. Several factors poignant the parameters of the solar cells, wherever these factors influence the performance on the solar cells. An experiment was carried out to investigate current interdependence on each color’s wavelength, and to give the effect regarding color cover, what part of the light of spectrum would produce a maximum power out, and also the effect of changing the wavelength (color) on short circuit current, and open voltage circuit. The results show the smallest value of maximum power in the violet zone and the biggest value of maximum power in the red zone.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Hu, Wenye, e Wendy Davis. "The Effect of Control Resolution on the Usability of Color-tunable LED Lighting Systems". In Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C.: OSA, 2017. http://dx.doi.org/10.1364/pv.2017.jw5a.19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Colored PV"

1

Farhar, B., e T. Coburn. Market Assessment of Residential Grid-Tied PV Systems in Colorado. Office of Scientific and Technical Information (OSTI), setembro de 2000. http://dx.doi.org/10.2172/766189.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Repins, Ingrid L. Proceedings of the 2019 PV Reliability Workshop, 26-28 February 2019, Lakewood, Colorado. Office of Scientific and Technical Information (OSTI), setembro de 2019. http://dx.doi.org/10.2172/1566045.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Farhar, B., e T. Coburn. A Market Assessment of Residential Grid-Tied PV Systems in Colorado: Executive Summary. Office of Scientific and Technical Information (OSTI), setembro de 2000. http://dx.doi.org/10.2172/765089.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Farhar, Barbara C., e Jan Buhrmann. Public Response to Residential Grid-Tied PV Systems in Colorado: A Qualitative Market Assessment. Office of Scientific and Technical Information (OSTI), julho de 1998. http://dx.doi.org/10.2172/1114071.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!