Conecte-se

Bibliografias temáticas / Connected application / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Connected application.

Artigos de revistas sobre o tema "Connected application"

Autor: Grafiati

Publicado: 26 de abril de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Connected application".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Bertini, Robert L., Haizhong Wang e Kevin Carstens. "Preparing Oregon for Connected Vehicle Deployment: Application Prioritization Process". Transportation Research Record: Journal of the Transportation Research Board 2615, n.º 1 (janeiro de 2017): 1–10. http://dx.doi.org/10.3141/2615-01.

Texto completo da fonte

Resumo:

To build on a project recently completed for the Oregon Department of Transportation (DOT), processes and tools were developed to prioritize the implementation of connected vehicle (CV) applications. Internal mechanisms for addressing CV development and deployment at the Oregon DOT were assessed; the technical maturity of each potential CV application was scanned, reviewed, and assessed; preliminary goals were developed; prospective CV applications were linked; and applications that fit with the potential role of the Oregon DOT in advancing these initiatives were refined, prioritized, and ranked. A shared vision and business plan that prioritizes CV applications for Oregon is recommended. An internal effort aimed at producing a small set of priority CV applications for further development is described. This effort culminated in a CV application prioritization workshop that included a priority mapping exercise, discussion of the CV concept, and an initial mapping of goals and applications. The workshop identified seven near-term priority CV applications for the Oregon DOT; 12 applications that the Oregon DOT will monitor (and possibly collaborate on with others in the future); and eight applications that the Oregon DOT will monitor but that will be led by others. The Oregon DOT has used the results of this effort as a springboard for hiring new staff dedicated to CV policy, forming a CV steering team, and launching a CV business plan. The process and tools can be used by other states and transportation agencies in their CV application prioritization processes.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Birdsong, Craig. "Theory and Application: A Cottage Connected". Journal of Interior Design 24, n.º 2 (setembro de 1998): 55–59. http://dx.doi.org/10.1111/j.1939-1668.1998.tb00329.x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Islam, Mhafuzul, Mizanur Rahman, Sakib Mahmud Khan, Mashrur Chowdhury e Lipika Deka. "Development and Performance Evaluation of a Connected Vehicle Application Development Platform". Transportation Research Record: Journal of the Transportation Research Board 2674, n.º 5 (maio de 2020): 537–52. http://dx.doi.org/10.1177/0361198120917146.

Texto completo da fonte

Resumo:

Connected vehicle (CV) application developers need a development platform to build, test, and debug real-world CV applications, such as safety, mobility, and environmental applications, in edge-centric cyber-physical system (CPS). The objective of this paper is to develop and evaluate a scalable and secure CV application development platform (CVDeP) that enables application developers to build, test, and debug CV applications in real-time while meeting the functional requirements of any CV applications. The efficacy of the CVDeP was evaluated using two types of CV applications (one safety and one mobility application) and they were validated through field experiments at the South Carolina Connected Vehicle Testbed (SC-CVT). The analyses show that the CVDeP satisfies the functional requirements in relation to latency and throughput of the selected CV applications while maintaining the scalability and security of the platform and applications.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Tian, Danyang, Guoyuan Wu, Peng Hao, Kanok Boriboonsomsin e Matthew J. Barth. "Connected Vehicle-Based Lane Selection Assistance Application". IEEE Transactions on Intelligent Transportation Systems 20, n.º 7 (julho de 2019): 2630–43. http://dx.doi.org/10.1109/tits.2018.2870147.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Diaz, A., P. Merino e F. J. Rivas. "Mobile Application Profiling for Connected Mobile Devices". IEEE Pervasive Computing 9, n.º 1 (janeiro de 2010): 54–61. http://dx.doi.org/10.1109/mprv.2009.63.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Tirkel, A. Z., C. F. Osborne, N. Mee, G. A. Rankin e A. McAndrew. "Maximal connected sets—application to microcell CDMA". International Journal of Communication Systems 7, n.º 1 (1994): 29–32. http://dx.doi.org/10.1002/dac.4500070105.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Băjenescu, Titu-Marius I. "INTERNET OF THINGS (IOT) CONQUERS THE WHOLE GLOBE". Journal of Social Sciences IV, n.º 2 (maio de 2021): 107–16. http://dx.doi.org/10.52326/jss.utm.2021.4(2).11.

Texto completo da fonte

Resumo:

The article examines the market for connected objects, which is gradually taking its place in the global economy. Autonomous cars, smartphones, video surveillance, connected objects are already present in our daily lives. However, it is in industry that the Internet of Things has developed the most. The Internet of Things, or IoT, is a concept defining the extension of the Internet to physical objects. This includes not only the connected objects, but also the sensors, software and network through which these objects operate. All connected objects are powered by software, which collects data - that are then processed in the cloud. They are, therefore, programmed and programmable objects that can interact via a WiFi, Bluetooth or 4G connection. Connected objects can be found in two main applications: an industrial application and an everyday application. In the industrial sector, connected objects are very well established in various sectors of activity: automotive, aeronautics, agriculture, health, commerce, public sector, logistics, etc. Everyday applications, known as consumer applications, are struggling to develop despite the announced Eldorado. Even though many connected everyday objects exist (toothbrushes, hoovers, watches, home automation, etc.), the business model is having trouble being set up and connected objects are having trouble proving their usefulness in everyday life. There needs to be consistency and logic in the range of connected products on offer and not just a range of independent products.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Wang, Yi Wang, Bo Zhang, Cao Kai e Zhang Shuai. "Design and Application of a Medium/Low-Power Stand-Alone/Grid-Connected Dual-Mode Inverter for Solar Photovoltaic System". Applied Mechanics and Materials 672-674 (outubro de 2014): 131–34. http://dx.doi.org/10.4028/www.scientific.net/amm.672-674.131.

Texto completo da fonte

Resumo:

The application of solar photovoltaic poer genernation usually has stand-alone and grid-connected modes,but most of the existing solar photovoltaic inverter has only a single function of off-grid or grid-connected,the suitability of system is relatively poor, difficult to meet the needs of the particular application. A medium and low-power stand-alone/grid-connected dual-mode inverter for solar photovoltaic system was designed,the composition, working principle and implementation of the inverter were introduced and developed.The designed inverter with a variety of functions,which can meet stand-alone or grid-connected and other solar photovoltaic applications, and can be used in different solar occasions.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Prachi, Ashtivkar, Lakeshri Bhargavi, Misal Sagar e Patil Mihir. "MAHAPARIWAR Application". International Journal for Research in Applied Science and Engineering Technology 11, n.º 5 (31 de maio de 2023): 1017–22. http://dx.doi.org/10.22214/ijraset.2023.51512.

Texto completo da fonte

Resumo:

Abstract: An Android family app aims to providea platform for family members to communicate and stay connected with each other. This app is designed to have a user-friendly interface that allows family members to share their schedules, create shopping lists, and share important documents, such as emergency contacts and medical information. It also features a built-in messaging system that enables users to send text,voice, and video messages to each other. The appwill also allow users to create and share events, such as family gatherings, birthdays, and anniversaries, and receive reminders for these events. The primary objective of this app is to foster communication and strengthen the bond between family members by providing them with a centralized platform for staying connected.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Kamalakar, P. "Passive Damping Filter Design and Application for Three-Phase PV Grid-Connected Inverter". International Journal of Trend in Scientific Research and Development Volume-1, Issue-6 (31 de outubro de 2017): 346–48. http://dx.doi.org/10.31142/ijtsrd2495.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Rathod, Kuldipsinh I., Mahipalsinh B. Jhala e A. D. Patel A.D.Patel. "Modeling and Simulation of Wind Turbine Connected to Pmsg for Wind Mill Application". Global Journal For Research Analysis 3, n.º 3 (15 de junho de 2012): 41–44. http://dx.doi.org/10.15373/22778160/mar2014/16.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Lebedeva, I. P. "Methods of Resolving Problems Connected with Raising Competitiveness of Mobile Application". Vestnik of the Plekhanov Russian University of Economics 18, n.º 2 (9 de abril de 2021): 170–77. http://dx.doi.org/10.21686/2413-2829-2021-2-170-177.

Texto completo da fonte

Resumo:

Problems that should be resolved by marketer when a new mobile application is put on sale can be divided into two groups. The 1-st one is connected with customer attraction, the 2-nd one – with his/her retaining. On the one hand, resolving these problems is directly connected with advertizing campaign and marketing research, however the majority of companies – developers of mobile applications have no financial possibilities for marketing accompaniment of application entering market. The article studies research, which can be done by own forces. With adequate analysis they can lead to high-quality results and increase in the number of users. Apart from that the author proposes the method of analyzing event arrangement in application software section, which can help keep an eye on user’s steps and interpret them to find key problems of the application. This method of event arrangement is not new for developers and it is offered by existing analytical platforms, however interpretation of obtained results and subsequent company steps can become a serious task. Further development of such methodology based on analytics, segmentation and reviews of users could resolve a problem of developing by companies-developers of mobile applications their own marketing strategy verified in practice.

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

이명희. "Japanese Culture Connected Reading Text Development and Application". Japanese Language and Literature Association of Daehan ll, n.º 47 (agosto de 2010): 147–70. http://dx.doi.org/10.18631/jalali.2010..47.009.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Mias, Christos, e Angelo Freni. "Application of Wait's Formulation to Connected Array Antennas". IEEE Antennas and Wireless Propagation Letters 12 (2013): 1535–38. http://dx.doi.org/10.1109/lawp.2013.2291277.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Luo, Hua, e Ruyun Ma. "The Existence and Application of Unbounded Connected Components". Journal of Applied Mathematics 2014 (2014): 1–7. http://dx.doi.org/10.1155/2014/780486.

Texto completo da fonte

Resumo:

LetXbe a Banach space andCna family of connected subsets ofR×X. We prove the existence of unbounded components in superior limit of{Cn}, denoted bylim¯ Cn, which have prescribed shapes. As applications, we investigate the global behavior of the set of positive periodic solutions to nonlinear first-order differential equations with delay, which can be used for modeling physiological processes.

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Kanda, K., Y. Iga, T. Hashimoto, T. Fujita, K. Higuchi e K. Maenaka. "Microfabrication and Application of Series-Connected PZT Elements". Procedia Chemistry 1, n.º 1 (setembro de 2009): 808–11. http://dx.doi.org/10.1016/j.proche.2009.07.201.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Hromadka II, T. V. "Application of the CVBEM to multiply connected regions". Applied Mathematical Modelling 14, n.º 4 (abril de 1990): 212–16. http://dx.doi.org/10.1016/0307-904x(90)90037-6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Forge, David, e J. L. Rami´rez Alfonsi´n. "Connected coverings and an application to oriented matroids". Discrete Mathematics 187, n.º 1-3 (junho de 1998): 109–21. http://dx.doi.org/10.1016/s0012-365x(97)00246-x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

K.M. Nasution, Mahyuddin, Jos Timanta Tarigan, Ivan Jaya, Sri Melvani Hardi e Syahriol Sitorus. "Collaborative 3D Terrain Editing Application". International Journal of Engineering & Technology 7, n.º 4.40 (16 de dezembro de 2018): 57–60. http://dx.doi.org/10.14419/ijet.v7i4.40.24075.

Texto completo da fonte

Resumo:

In 3D content creation, developing a terrain may be time consuming due to most of current 3D applications require a vast terrain. In this paper, we introduce a collaborative terrain editor that allows multiple users to collaborate in real time. The objective of the application is to increase the productivity in developing a vast terrain in 3D environment. The application is based on a client server architecture where each editor applications are connected to a single server that collects and distributes the editing process done by each user. We perform our test in a local area network environment with multiple clients connected to a server and observe the performance and the usability of the software. The test results show the system is capable to perform real-time collaborative terrain editing with insignificant delay. Moreover, most of our users agree that using the system may increase the speed in 3D terrain creation.Â

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Lubis, Ali Akbar, Agnes Irene Silitonga e Adi Widarma. "APLIKASI PEMBELAJARAN ALGORITMA BOUNDARY 4-CONNECTED DALAM IDENTIFIKASI JUMLAH SEL PADA CITRA SEL DARAH MERAH". Jurnal Teknologi Pendidikan (JTP) 17, n.º 2 (1 de novembro de 2024): 81. http://dx.doi.org/10.24114/jtp.v17i2.64901.

Texto completo da fonte

Resumo:

Abstrak: Perkembangan teknologi yang semakin berkembang pesat, maka mengharuskan sistem Pendidikan juga dapat menyesuaikan dengan perkembangan teknologi tersebut. Salah satu pemanfaatan teknologi informasi dalam bidang pendidikan adalah media pembelajaran atau aplikasi pembelajaran. Aplikasi pembelajaran adalah suatu media pembelajaran dengan metode belajar yang memudahkan proses belajar, tidak membuat bosan dan sulit. Aplikasi pembelajaran dapat dibangun untuk memudahkan proses pembelajaran algoritma. Karena prosesnya yang kompleks dan membutuhkan waktu untuk memahami langkah-langkahnya. Penelitian ini bertujuan untuk membangun aplikasi pembelajaran algoritma Boundary 4-Connected dalam identifikasi jumlah sel pada citra sel darah merah. Algoritma Boundary 4-connected merupakan metode yang dapat digunakan untuk mengklasifikasikan region atau objek dalam citra digital. Hasil dari penelitian ini adalah aplikasi pembelajaran algoritma Boundary 4-Connected dalam identifikasi jumlah sel pada citra sel darah merah sudah layak untuk digunakan dan dapat dijadikan sebagai alternatif media pembelajaran untuk memahami cara kerja algoritma Boundary 4-Connected dalam identifikasi jumlah sel pada citra sel darah merah Kata Kunci: Boundary 4-Connected, aplikasi pembelajaran, citra, sel darah Abstract: The rapid development of technology requires the education system to be able to adapt to the development of this technology. One of the uses of information technology in the field of education is learning media or learning applications. Learning applications are learning media with learning methods that facilitate the learning process, do not make it boring and difficult. Learning applications can be built to facilitate the process of learning algorithms. Because the process is complex and takes time to understand the steps. This study aims to build a learning application for the Boundary 4-Connected algorithm in identifying the number of cells in red blood cell images. The Boundary 4-connected algorithm is a method that can be used to classify regions or objects in digital images. The results of this study are that the Boundary 4-Connected algorithm learning application in identifying the number of cells in red blood cell images is suitable for use and can be used as an alternative learning media to understand how the Boundary 4-Connected algorithm works in identifying the number of cells in red blood cell images. Keywords: Boundary 4-Connected, Learning application, image, blood cells

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Ali, Siti Adlina Md, Maisarah Abu, Siti Normi Zabri e Shipun Anuar Hamzah. "Wide-band metamaterial perfect absorber through double arrow shape printed on a thin dielectric". Bulletin of Electrical Engineering and Informatics 10, n.º 5 (1 de outubro de 2021): 2488–95. http://dx.doi.org/10.11591/eei.v10i5.3154.

Texto completo da fonte

Resumo:

A wide-band metamaterial perfect absorber was introduced. The dual arrow shapes and the ground plane were in between the 0.0035λ TLY-3. Lump element technique was applied to enhance the absorption bandwidth, which was connected between both of the arrow structures. The limitation during fabrication process in using lump element, had seriously restricted its practical applications for microwave absorption. Then, a very thin line was connected between both arrow structures to represent the resistance by lump element which was expected to ease the fabrication process and practical applications as well. Four cases were analyzed: double arrow, double arrow with lump connected, double arrow with lump connected and 9 mm air gap, and thin line connected with 6 mm air gap. The fourth case achieved the highest operational absorbency frequency, which developed about 7.38 GHz (3.87 GHz to 11.25 GHz) approximately to 7.38 GHz. Three resonant frequencies were achieved; 4.17 GHz, 6.09 GHz and 10.30 GHz with perfect absorbency. These properties are expected to be used in practical applications such as satellite and radar communications transmission. These properties of the metamaterial absorber could increase the functionality of the metamaterial absorber to be used in any application especially in reducing radar cross section for stealth application.

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Yoon Chun, Byung. "Development of iot furniture platform connected to smart home and application". International Journal of Engineering & Technology 7, n.º 2.12 (3 de abril de 2018): 90. http://dx.doi.org/10.14419/ijet.v7i2.12.11098.

Texto completo da fonte

Resumo:

Background/Objectives: A practical use of sterilizer to prevent the inside of closet and drawer from going moldywill be expected to increase demand in sterilizer for earrings and accessories.Methods/Statistical analysis: Application design and software are developed in consideration of user convenience connected with IoT platform. Major performance and function are defined, including materialization of unit function, hardware platform and instrument development, and development of embedded S/W and mobile application.Findings: Application connected to closing and opening device based on IoT is developed not only to remotely monitor open and shut the door in closet or drawer but also to switch device remotely which controls ion generator and humidity but also to operate alarm device in case of opening door of closet or drawer forcibly.Improvements/Applications: Application as a smart lock for security can be expected in office, closet, and drawers. A practical use of sterilizer to prevent the inside of closet and drawer from going moldy is expected to using as a sterilizer for earrings and accessories.

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Zheng, Zhaohong, Tianxia Zhang e Jiaxiang Xue. "Application of Fuzzy Control in a Photovoltaic Grid-Connected Inverter". Journal of Electrical and Computer Engineering 2018 (2018): 1–10. http://dx.doi.org/10.1155/2018/3806372.

Texto completo da fonte

Resumo:

To realize the maximum power output of a grid-connected inverter, the MPPT (maximum power point tracking) control method is needed. The perturbation and observation (P&O) method can cause the inverter operating point to oscillate near the maximum power. In this paper, the fuzzy control P&O method is proposed, and the fuzzy control algorithm is applied to the disturbance observation method. The simulation results of the P&O method with fuzzy control and the traditional P&O method prove that not only can the new method reduce the power loss caused by inverter oscillation during maximum power point tracking, but also it has the advantage of speed. Inductive loads in the post-grid-connected stage cause grid-connected current distortion. A fuzzy control algorithm is added to the traditional deadbeat grid-connected control method to improve the quality of the system’s grid-connected operation. The fuzzy deadbeat control method is verified by experiments, and the harmonic current of the grid-connected current is less than 3%.

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Romão, E. C., J. B. Aparecido, J. B. Campos-Silva e L. F. M. Moura. "HEAT TRANSFER IN MULTI-CONNECTED AND IRREGULAR DOMAINS WITH NON-UNIFORM MESHES". Revista de Engenharia Térmica 7, n.º 2 (31 de dezembro de 2008): 44. http://dx.doi.org/10.5380/reterm.v7i2.61773.

Texto completo da fonte

Resumo:

In this work is presented a numerical solution for temperature profile in two-dimensional diffusion inside irregular multi-connected geometry. The special discretization has been done by two variants of the finite Element Method: Galerkin Finite Element Method (GFEM) and Least Squares Finite Element Method (LSFEM). Three applications are presented. The first for a regular double connected domain; the second for a regular multi-connected domain and the third application for an irregular multi-connected domain. In all applications are considered Dirichlet boundary conditions. The results obtained in the present work are compared with results from Ansys® simulations. The results of each method are presented and discussed and the characteristics and advantages of the methods are also discussed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Xiong, Yuan Sheng, e Shang Xing Ma. "Control of Bidirectional AC-DC Converters for DC Microgrid Application". Applied Mechanics and Materials 536-537 (abril de 2014): 1219–22. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.1219.

Texto completo da fonte

Resumo:

Three-phase bidirectional AC/DC converter acts as a key part in DC microgrid. To improve the stability of DC bus voltage for the grid-connected mode in DC microgrid, a sliding mode or PI controller based on SVPWM modulator is designed for the bidirectional AC/DC converter in inverter mode. When the error between grid-connected current reference value and actual value is larger than the threshold value, the sliding mode controller is used. Otherwise, the PI controller is adopted. The great grid-connected current reference value fluctuation is simulated in PSIM software when the DC microgrid operates in the grid-connected inverter mode. The simulation results show that the gird-connected current actual value can fast track with the reference value. Then the dynamic response performance of DC bus voltage is improved.

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Birglen, Lionel, e Clément M. Gosselin. "Force Analysis of Connected Differential Mechanisms: Application to Grasping". International Journal of Robotics Research 25, n.º 10 (outubro de 2006): 1033–46. http://dx.doi.org/10.1177/0278364906068942.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

White, H. J., M. Snook, D. M. Monro, C. Stace, N. A. Brownjohn, W. A. Crossland, J. A. Nicholls et al. "An optically connected parallel machine: Design, performance and application". IEE Proceedings - Optoelectronics 146, n.º 3 (1 de junho de 1999): 125–36. http://dx.doi.org/10.1049/ip-opt:19990511.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Silverman, H. F., e D. P. Morgan. "The application of dynamic programming to connected speech recognition". IEEE ASSP Magazine 7, n.º 3 (julho de 1990): 6–25. http://dx.doi.org/10.1109/53.54526.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Śmigielski, B., M. Chołuj e G. Cybulski. "Miniature Wireless Reflectance Pulse Oximeter Connected to Mobile Application". Acta Physica Polonica A 146, n.º 4 (outubro de 2024): 610–14. https://doi.org/10.12693/aphyspola.146.610.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Yan, Xiao-Dan, Stephen Kelley e Mark Goldberg. "Application of connected iterative scan in biological neural network". Neural Computing and Applications 21, n.º 8 (17 de julho de 2011): 2097–103. http://dx.doi.org/10.1007/s00521-011-0633-3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

KIMURA, Taiga, Daisuke SASAKI, Hayato YASE e Jun KADOWAKI. "Application of Connected Type Multi DOF Pneumatic Soft Actuator". Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) 2020 (2020): 2P2—G13. http://dx.doi.org/10.1299/jsmermd.2020.2p2-g13.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Moses, Antwi, e Hongyu Sun. "Bidirectional energy storage photovoltaic grid‐connected inverter application system". International Journal of Energy Research 44, n.º 14 (10 de agosto de 2020): 11509–23. http://dx.doi.org/10.1002/er.5771.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

R., Deepa, A. N. Nagashree e Anand . "Transformerless Single Phase Inverter Suitable for Grid Connected Application". International Journal of Advance Research and Innovation 3, n.º 2 (2015): 110–15. http://dx.doi.org/10.51976/ijari.321525.

Texto completo da fonte

Resumo:

In Photovoltaic generation system Transformerless inverter has attracted more attention because of its high efficiency output and reduced cost. The transformerless inverter used for grid connected application in which leakage current is one of the main issues this leakage current has to be tackled properly to avoid EMI problem. Hence, the main aim of this paper is how to achieve common mode voltage constant to eliminate the leakage current. This is done by applying any one of the following SPWM strategy it can be: 1. Basic SPWM strategy 2. Bidirectional SPWM control strategy, Thus by applying any one of the strategy mentioned above the leakage current can be reduced by keeping common mode voltage constant, hence by achieving common mode voltage constant high reliability is obtained. By eliminating the dead time effect, low total harmonic distortion is reduced. Because of using three level output voltage the output filter inductance size is reduced this will lead to high efficiency and power density.

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Gamal, K. Simone. "HEALTH MONITORING SYSTEM (DEVICE-WEB APPLICATION-MOBILE APPLICATION)". International Journal of Engineering and Artificial Intelligence 3, n.º 3 (1 de setembro de 2022): 11–26. http://dx.doi.org/10.55923/jo.ijeal.3.3.103.

Texto completo da fonte

Resumo:

The main objective of this project is to employ a device capable of measuring human temperature, spo2, and heart rate this system is for 24×7 human health monitoring. The device consists of Node MCU, which is used to control and data processing and all sensors connected to Node MCU. Through sensors, it is possible to measure all values and display them on an OLED screen. These values are then used for detecting any critical situation. Users can enter the values of spo2, heart rate, and temperature into the mobile application and see their results. In critical situations, the user is also able to contact any doctor through the mobile application. Any doctor can monitor this person from anywhere around the world through the Internet. The application also connected to mobile application through firebase to allow the user to download PDF that contain all physiological Information. Through this Paper, the complete building process is discussed in detail, from the thought development until the HMS device (Health Monitoring System) was built, running through the design phase and detailed design components as software and hardware, with a list of targeted future improvement. All from the center of Ismailia, Egypt; To the world.

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Songchitruksa, Praprut, Srinivasa Sunkari, Ines Ugalde, Justinian Rosca e Juan Aparicio Ojea. "Interlinking Vissim and ns-3 for Connected Vehicle Simulation: Case Study of Intelligent Dilemma Zone Avoidance". Transportation Research Record: Journal of the Transportation Research Board 2619, n.º 1 (janeiro de 2017): 36–43. http://dx.doi.org/10.3141/2619-04.

Texto completo da fonte

Resumo:

The effects of realistic wireless communication are important for the modeling and evaluation of emerging connected and automated vehicle applications. This paper discusses the development of a novel closed-loop connected vehicle analysis system (CONVAS) interlinking Vissim microscopic traffic simulation and ns-3 wireless communication simulation. In CONVAS, ns-3 uses Vissim’s vehicle positions for wireless modeling and in turn Vissim uses the packet reception from ns-3 to modify vehicle behaviors. The authors propose an application for intelligent avoidance of the dilemma zone to demonstrate the use of the platform for modeling connected and automated vehicles and to illustrate the effects of communications on the application performance. A simulation experiment was conducted with a test bed for an isolated high-speed, fixed-time signalized intersection with different communication model configurations. The evaluation results showed that the effectiveness of the application as measured by successful clearing of vehicles from the dilemma zone depended greatly on performance of wireless communication.

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Sakai, Keita, Mamiko Yagi, Mitsuki Ito e Jun-ichi Shirakashi. "Multiple connected artificial synapses based on electromigrated Au nanogaps". Journal of Vacuum Science & Technology B 40, n.º 5 (setembro de 2022): 053202. http://dx.doi.org/10.1116/6.0002081.

Texto completo da fonte

Resumo:

Building an artificial synaptic device with multiple presynaptic inputs will be a significant step toward realization of sophisticated brain-inspired platforms for neuromorphic computing. However, an artificial synapse that can mimic functions of multiple synapses in a single device has not yet been well developed with existing electronic devices. Here, we experimentally implement the functions of multiple synapses in a single artificial synaptic device consisting of multiple connected nanogap electrodes. The “activation” technique, which is based on electromigration of metal atoms induced by a field emission current, was applied to the device to emulate the synaptic functions. We show that the device, upon application of activation, exhibits conductance changes in response to stimulation voltage, similar to the memory states of biological synapses. Several important synaptic responses—notably, short-term plasticity and long-term plasticity—were successfully demonstrated in multiple connected Au-nanogaps. For further application, a simple network was implemented using multi-input devices based on a two-terminal Au nanogap array, exhibiting the ability to classify the digital input vector pattern. These demonstrations pave the way for brain-inspired computing applications such as associative memory, pattern classification, and image recognition.

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Gao, Yingqi, Zhixiang Li e Feiyang Sun. "Comparative Analysis of Grid-Connected Inverter for Photovoltaic Generation". Applied and Computational Engineering 127, n.º 1 (10 de janeiro de 2025): 50–58. https://doi.org/10.54254/2755-2721/2025.20244.

Texto completo da fonte

Resumo:

The global energy mix is currently facing a major transformation, with the non-renewability of traditional fossil energy sources such as coal, oil and natural gas and environmental pollution becoming increasingly prominent. This paper presents an in-depth comparison between different grid-connected photovoltaic (PV) inverters, focusing on the performance, cost-effectiveness, and applicability of these two inverter technologies in PV grid-connected applications. These inverters are highly adaptable to dynamic grid conditions and provide significant harmonic suppression, but the relatively high initial cost is their major drawback. The study also explores optimization methods for filtering techniques, as well as future directions for inverter technology, including the application of smart materials, advanced control algorithms and new semiconductor materials. It is found that LCL-type inverters and three-phase inverters with active power filter have their own advantages, and the selection should be based on specific application needs, cost budget and power quality requirements. In the future, with the continuous progress of technology, we expect that the inverter technology can realize higher efficiency and better power quality to meet the increasing demand for grid-connected PV system.

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Sung, Feu Che, Siti Fatimah Abdul Razak, Sumendra Yogarayan, Mohd Fikri Azli Abdullah, Noor Hisham Kamis e Afizan Azman. "Conceptualising flood warning system for connected vehicles". Indonesian Journal of Electrical Engineering and Computer Science 31, n.º 3 (1 de setembro de 2023): 1684. http://dx.doi.org/10.11591/ijeecs.v31.i3.pp1684-1695.

Texto completo da fonte

Resumo:

Floods are a common natural hazard in Malaysia during the monsoon season. It affects millions of people each year that leads to severe deaths and infrastructure destruction. In recent time, flood warning system (FWS) has been a notable topic but it has not been extensively implemented in Malaysia. In this study, we developed a FWS that can interface with connected vehicles in order to provide alerts to drivers while also sending warnings to end users. This type of FWS enables vehicles to connect with one another within a particular radius to broadcast flood information via long range (LoRa) communication technology. When the water level rises over a certain point, the system sends a warning to drivers indicated through a mobile application. Drivers have the option to take alternative route, reducing the likelihood of damage when driving into or near a flooded area. The developed application demonstrates that the warning was able to be instantly displayed to the driver if there is a significant increase in water level. Experimental evidence shows that the driver was able to receive the water level alert and a visual interpretation of the immediate area affected by flood through the application.

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Wattanapan, Jaturon, Watchareepan Atiponrat e Teerapong Suksumran. "Embedding of Strongly Topological Gyrogroups in Path-Connected and Locally Path-Connected Gyrogroups". Symmetry 12, n.º 11 (2 de novembro de 2020): 1817. http://dx.doi.org/10.3390/sym12111817.

Texto completo da fonte

Resumo:

A gyrogroup, an algebraic structure that generalizes groups, is modeled on the bounded symmetric space of relativistically admissible velocities endowed with Einstein’s addition. Given a gyrogroup G, we offer a new way to construct a gyrogroup G• such that G• contains a gyro-isomorphic copy of G. We then prove that every strongly topological gyrogroup G can be embedded as a closed subgyrogroup of the path-connected and locally path-connected topological gyrogroup G•. We also study several properties shared by G and G•, including gyrocommutativity, first countability and metrizability. As an application of these results, we prove that being a quasitopological gyrogroup is equivalent to being a strongly topological gyrogroup in the class of normed gyrogroups.

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Bynagari, Naresh Babu. "Industrial Application of Internet of Things". Asia Pacific Journal of Energy and Environment 3, n.º 2 (31 de dezembro de 2016): 75–82. http://dx.doi.org/10.18034/apjee.v3i2.576.

Texto completo da fonte

Resumo:

‘Industrial application of Internet of Things deals with the application of Internet of things to produce industrial services. It analyzed how industries can carry out multiple services with function remotely using IoT-connected devices. The several benefits and drawbacks to the application of IoT services were also investigated. The IoT is a network of connected systems and smart devices that use encoded networks like sensors, processors, and interactive hardware to receive, send and store data. The utilization of IoT for industrial functions will significantly improve industrial output, and in the future, more industries will come to apply IoT devices and systems for greater efficiency.

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Qin, Xiao Di, Rong Rong Zhou, Lie Xia e Liang Hui Xu. "Design and Research of Integrated PV and Storage Grid-Connected Generation System". Advanced Materials Research 1070-1072 (dezembro de 2014): 24–29. http://dx.doi.org/10.4028/www.scientific.net/amr.1070-1072.24.

Texto completo da fonte

Resumo:

Based on practical project and application, the design scheme of small capacity of integrated PV and storage grid-connected generation system is presented in this paper. For demonstrative and experimental purpose in this project, it includes several typical PV modules, tracking system and grid-connected inverters. Entire design scheme covers system integration, grid-connected solution, PV array and bracket, monitoring system, energy storage system, and etc. Configuration and application prospect of energy storage system in grid-connected PV system are mainly introduced. The characteristics of lithium battery and vanadium redox flow battery, as well as their application in the field of distributed power generation are researched.

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

Song, Xinxin, Shitao Wang e Zhiqiang Wang. "Research and application of distributed photovoltaic precise dispatching and control technology". Journal of Physics: Conference Series 2855, n.º 1 (1 de setembro de 2024): 012003. http://dx.doi.org/10.1088/1742-6596/2855/1/012003.

Texto completo da fonte

Resumo:

Abstract With the continuous development of the electricity market, the scale of power terminal access continues to expand, and distributed photovoltaic collection and control strategies have become an important research hotspot. The article studies the grid-connected control technology of distributed photovoltaic power plants from grid-connected system architecture, the photovoltaic array operation mode selection, the grid-connected structure between photovoltaic groups, and the series-parallel scheme. It proposes an application method for precise regulation through distributed photovoltaic peak shaving.

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Zarikar, Shyam P. "Modelling of Grid Connected DC/AC Converter for Photovoltaic Application". International Journal of Advanced Trends in Computer Science and Engineering 8, n.º 1.4 (15 de setembro de 2019): 404–7. http://dx.doi.org/10.30534/ijatcse/2019/6281.42019.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Dong, Ying, Jing-Jing Jv, Xiao-Wei Wu, Jing-Lan Kan, Ting Lin e Yu-Bin Dong. "A palladium–carbon-connected organometallic framework and its catalytic application". Chemical Communications 55, n.º 96 (2019): 14414–17. http://dx.doi.org/10.1039/c9cc07829k.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

XU, Cuixia. "Application of DFS in the Study of Edge-connected Graph". International Journal of Education and Management Engineering 2, n.º 1 (29 de janeiro de 2012): 9–15. http://dx.doi.org/10.5815/ijeme.2012.01.02.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Ichikawa, Ikumi, e Toshimitsu Ushio. "Application of reinforcement learning to adaptive control of connected vehicles". Nonlinear Theory and Its Applications, IEICE 10, n.º 4 (2019): 443–54. http://dx.doi.org/10.1587/nolta.10.443.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

N, Prakash, e Balaji V.R. "Three phase voltage source inverters with grid connected industrial application". International Journal of Engineering & Technology 7, n.º 4 (16 de abril de 2018): 18. http://dx.doi.org/10.14419/ijet.v7i2.9.9653.

Texto completo da fonte

Resumo:

The grid-connected issue is one of the major problems in the field of Power Electronics. In this paper, the Three Phase Voltage Source Inverter (VSI) is controlled by a Space Vector Pulse Width Modulation (SVPWM) Technique. SVPWM control technique and Park transformation, the managed inverter control system to convert input DC power into AC power, stabilize the output voltage and current, and feeds the excess power to the utility grid can be achieved by controllers. Usually, the grid source contains higher level of harmonics. To analyze the harmonics, nonlinear load is connected externally in the point of common coupling. The main aim of this paper is to modeling, simulation and experimental study of the three-phase grid connected inverter. By using the control algorithm, the grid sides Total Harmonics Distortion (THD) are controlled to the 1.54% for 800V DC as per the IEEE standard. The stimulation results such as AC output voltage and current, inverter system power flow, and grid disturbances detection signals, proves the effectiveness of the developed control algorithm. The control algorithms to makes the for this inverter outputs is pure sinusoidal.

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Hao, Quanrui, Boon-Teck Ooi, Feng Gao, Can Wang e Nan Li. "Three-Phase Series-Connected Modular Multilevel Converter for HVDC Application". IEEE Transactions on Power Delivery 31, n.º 1 (fevereiro de 2016): 50–58. http://dx.doi.org/10.1109/tpwrd.2015.2392389.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Auh, Yoonil, e Heejung Raina Sim. "Application of Cloud Computing Technologies in the Hyper-Connected Classroom". Advanced Science Letters 24, n.º 3 (1 de março de 2018): 1944–48. http://dx.doi.org/10.1166/asl.2018.11815.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Hirose, Kei Miki. "Approach to speaker‐independent connected word recognition for telephone application". Journal of the Acoustical Society of America 84, S1 (novembro de 1988): S217. http://dx.doi.org/10.1121/1.2026183.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!