Bibliografias temáticas / Evaluation parameter

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Evaluation parameter"

Autor: Grafiati

Publicado: 1 de abril de 2023

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Evaluation parameter".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Evaluation parameter"

Muhammad Fadhil, Dr. Neti Karnati, M. Pd e Dr. Matin, M. Pd. "EVALUASI PROGRAM PELATIHAN PENGOLAHAN BAHAN PUSTAKA DI PUSDIKLAT PERPUSTAKAAN NASIONAL RI". PARAMETER: Jurnal Pendidikan Universitas Negeri Jakarta 32, n.º 2 (26 de dezembro de 2020): 99–114. http://dx.doi.org/10.21009/parameter.322.02.

Texto completo da fonte

Resumo:

This research was intended to see how the Kirkpatrick four level evaluation model is applied in the Library Material Processing training program organized by the Education and Training center of National Library of Indonesia. This evaluation research uses the Kirkpatrick evaluation model (Reaction, Learning, Behavior, Result). The subject of this research is training organizers, training instructors and training participants in the processing of library materials. Data collection techniques in this study used observation, documentation and interviews. Data validity test is done using triangulation of sources and methods. The results of this study show that the implementation of the Library Material Processing Training program has not gone well based on the aspect that being evaluated. 1) In the Reaction evaluation aspect, the implementation of training at this stage goes well. It can be seen from the results of the evaluator's last evaluation score which has a score of 93.88 or very satisfied and the last evaluation score of the instructor who has a score of 90.66 or very satisfied. 2) In the aspect of learning evaluation, the training process goes well according to the plan that was made before. This can be seen from the final score of all participants who have a score above the least limit. 3) in the Behavior aspect, the training organizers have not carried out observations of the participants' behavior after the training. 4) Then in the Result aspect, the training organizers also have not carried out observations on the participants' contributions or the use of participant's knowledge of the library performance. Keywords: Program Evaluation, Library Material Processing Training, Kirkpatrick Evaluation Model

Estilos ABNT, Harvard, Vancouver, APA, etc.

Badrujaman, Aip, Furqon Furqon, Syamsu Yusuf e Suherman Suherman. "PENGARUH MODEL EVALUASI LAYANAN DASAR BERORIENTASI AKUNTABILITAS TERHADAP PENINGKATAN AKUNTABILITAS GURU BK SMP". PARAMETER: Jurnal Pendidikan Universitas Negeri Jakarta 27, n.º II (30 de dezembro de 2015): 158. http://dx.doi.org/10.21009/parameter.272.08.

Texto completo da fonte

Resumo:

Abstract: This study aims to test the effectiveness of effect evaluation model of basic services oriented towards increasing the accountability of teacher accountability BK SMPN East Jakarta in organizing basic services. The research used a quantitative approach with a true research methods experiment with design waiting-list post-test only control group design. The study was conducted in East Jakarta to take the research subject teacher BK East Jakarta SMPN determined randomly as many as 37 people, divided in 17 experimental group and 16 control group. The determination of the group members using random (random assignment). The research instrument used is the scale of accountability in the review of the principal, homeroom, as well as students. Hypothesis testing is done using a technique Anacova by controlling the variables attitude towards the evaluation of basic services. The contribution of evaluation skills and attitudes towards evaluation through correlation analysis. The results showed empirically, basic service-oriented evaluation model was not able to improve the accountability of all components of the accountability of teachers BK SMPN East Jakarta in organizing basic services. Only one component of the increased accountability that is an explanation of the basic service. Variable skills to evaluate basic services make a major contribution to the implementation of the model MELDBA, while attitudes toward the evaluation does not really give contribution on MELDBA model implementation. Abstrak: Penelitian ini bertujuan menguji efektivitas pengaruh model evaluasi layanan dasar berorientasi akuntabilitas terhadap peningkatan akuntabilitas guru BK SMPN Jakarta Timur dalam menyelenggarakan layanan dasar. Penelitian menggunakan pendekatan kuantitatif dengan metode penelitian true eksperiment dengan desain waiting-list post-test only control group design. Penelitian dilakukan Jakarta Timur dengan mengambil subjek penelitian yakni guru BK SMPN Jakarta Timur yang ditentukan secara random sebanyak 37 orang yang terbagi pada 17 kelompok eksperimen dan 16 kelompok kontrol. Penentuan anggota kelompok menggunakan random (random assignment). Instrumen penelitian yang digunakan adalah skala akuntabilitas dalam tinjauan kepala sekolah, wali kelas, serta siswa. Pengujian hipotesis dilakukan menggunakan teknik ANAKOVA dengan mengontrol variabel sikap terhadap evaluasi layanan dasar. kontribusi variabel keterampilan evaluasi dan sikap terhadap evaluasi dilakukan melalui analisis korelasi. Hasil penelitian menunjukkan secara empirik, model evaluasi layanan dasar berorientasi akuntabilitas tidak mampu meningkatkan seluruh komponen akuntabilitas guru BK SMPN Jakarta Timur dalam menyelenggarakan layanan dasar. Hanya satu komponen akuntabilitas yang meningkat yaitu penjelasan mengenai layanan dasar. Variabel keterampilan melakukan evaluasi layanan dasar memberikan kontribusi besar terhadap implementasi model MELDBA, sedangkan sikap terhadap evaluasi tidak terlalu memberikan konrtibusi pada implementasi model MELDBA.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Fu, Qiang, Jianjun Liu, Jiarui Shi, Xiao Li, Xueji Cai e Zilong Meng. "Uncertainty Evaluation of Stochastic Structural Response with Correlated Random Variables". Shock and Vibration 2022 (6 de junho de 2022): 1–16. http://dx.doi.org/10.1155/2022/1496358.

Texto completo da fonte

Resumo:

It has been realized that the influence of system parameter uncertainties may be very significant, even dominant, in stochastic response evaluation. Nevertheless, in reality, this evaluation process may be difficult to conduct due to these parameter variables (viz. structural property parameters, such as stiffness, damping, and strength, and excitation characteristics parameters, such as frequency content and duration) that are usually correlated with each other. Therefore, this study devotes to develop a method for evaluating stochastic response uncertainty involving correlated system parameter variables. In this method, the evaluation expression for the mean and standard deviation of the maximum response including uncertainty parameter variables are provided first; subsequently, a third-moment pseudo-correlation normal transformation is able to be performed for converting the correlated and non-normal system parameter variables with unknown joint probability density function (PDF) or marginal PDF into the mutually independent standard normal ones; ultimately, a point estimate procedure (PEP) based on univariate dimension reduction integration can be carried out for evaluating the structural stochastic response including uncertainty system parameters. Several numerical examples with an engineering background involving correlated system parameter variables are analyzed and discussed under stochastic excitation, and their results are compared with those yielded by Monte Carlo simulation (MCS) so as to demonstrate the effectiveness of the approach proposed. It indicated that the method proposed, in this study, provides an effective path to deal with uncertainty evaluation of stochastic structural response involving correlated random variables.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Samadi. "ANALISIS EVALUASI PEMBELAJARAN GURU TERSERTIFIKASI DI SMA JAKARTA PUSAT". PARAMETER: Jurnal Pendidikan Universitas Negeri Jakarta 31, n.º 1 (28 de junho de 2019): 28–40. http://dx.doi.org/10.21009/parameter.311.03.

Texto completo da fonte

Resumo:

Abstrak The purpose of this study was to analyze aspects of the evaluation of learning in high school schools in Central Jakarta. The method used in this research is quantitative descriptive through the analysis of learning tools used in daily teaching and learning activities. The sample of this study consisted of 19 geography teachers who had been certified at SMAN 25, SMAN 4, and SMAN 68, SMAN 35, SMAN 7, SMAN 24, SMAN 30, SMAN 5, SMAN 1, and SMAN 10, and private schools namely SMA Santa Theresia, Paskalis High School, Taman Madya 1 and 5 High School, and Petojo IPPI High School. The analysis technique in this study uses descriptive methods in the form of matrix analysis. The results of the study indicate that the teacher learning tools that have been certified, especially in the evaluation component of learning are as follows: (1) Not the work of the teacher itself, namely the results of giving or the effects of selecting specifically for teaching materials and student worksheets, and (2) Not fully developed. Keywords: Learning evaluation analysis, Certified teacher, Central Jakarta High School Abstrak Tujuan penelitian ini adalah menganalisis aspek-aspe evaluasi pembelajaran di sekolah-sekolah SMA di Jakarta Pusat. Metode yang digunakan dalam penelitian ini adalah deskriptif kuantitatif melalui analisis perangkat pembelajaran yang digunakan dalam kegiatan belajar mengajar sehari-hari. Sampel penelitian ini terdiri dari 19 orang guru geografi yang telah disertifikasi di SMAN 25, SMAN 4, dan SMAN 68, SMAN 35, SMAN 7, SMAN 24, SMAN 30, SMAN 5, SMAN 1, dan SMAN 10, serta sekolah swasta yaitu SMA Santa Theresia, SMA Paskalis, SMA Taman Madya 1 dan 5, dan SMA IPPI Petojo. Teknik analisis dalam penelitian ini menggunakan metode deskriptif dalam bentuk analisis matriks. Hasil penelitian menunjukkan bahwa perangkat pembelajaran guru yang sudah disertifikasi khususnya pada komponen evaluasi pembelajaran adalah sebagai berikut : (1) Bukan hasil karya guru itu sendiri, yaitu hasil pemberian atau hasil dari memilih khusus untuk bahan ajar dan lembar kerja siswa, serta (2) Tidak dikembangkan secara maksimal. Kata kunci : Analisis evaluasi pembelajaran, Guru tersertifikasi, SMA Jakarta Pusat

Estilos ABNT, Harvard, Vancouver, APA, etc.

Leal, L., H. Derrien, K. Guber, G. Arbanas e D. Wiarda. "Evaluation of the Chromium Resonance Parameters Including Resonance Parameter Covariance". Journal of the Korean Physical Society 59, n.º 2(3) (12 de agosto de 2011): 1644–48. http://dx.doi.org/10.3938/jkps.59.1644.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

SOGAWA, Noriaki, Masao ARAKI, Tuyoshi UEHARA e Tomokazu KUSAKARI. "Reliability Evaluation on Estimated Parameters of 2-Parameter Lognormal Distribution". PROCEEDINGS OF HYDRAULIC ENGINEERING 34 (1990): 1–6. http://dx.doi.org/10.2208/prohe.34.1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Traegner, U. K., e M. T. Suidan. "Parameter Evaluation for Carbon Adsorption". Journal of Environmental Engineering 115, n.º 1 (fevereiro de 1989): 109–28. http://dx.doi.org/10.1061/(asce)0733-9372(1989)115:1(109).

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Parajuli, Ayush. "Evaluation of weibull parameter estimators for wind speed of Jumla, Nepal". Journal of Engineering Issues and Solutions 1, n.º 1 (1 de maio de 2021): 1–7. http://dx.doi.org/10.3126/joeis.v1i1.36812.

Texto completo da fonte

Resumo:

Weibull Probability Distribution Function (PDF) is widely used across world for estimation of wind power. Weibull function is a two parameter probability distribution function. The methods employed for the evaluation of these two parameters are critical for the efficient use of Weibull PDF. In the present study, three different Weibull PDF parameter estimators have been evaluated. For this purpose, the daily averaged wind speed data of Jumla Station, Nepal for period of 10 year (2004 – 2014: 2012 excluded) is studied. The parameter estimator evaluated in this study are Method of Moments (MoM), Least Square Error Method (LSEM) and Power Density Method (PDM). It has been found that Method of Moments (MoM) is the best estimator for evaluating Weibull Parameters.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Putri, Ni Luh. "MODEL PEMBELAJARAN KETERAMPILAN BINA DIRI BAGI ANAK USIA DINI TUNAGRAHITA". PARAMETER: Jurnal Pendidikan Universitas Negeri Jakarta 25, n.º 2 (1 de dezembro de 2014): 73–85. http://dx.doi.org/10.21009/parameter.252.03.

Texto completo da fonte

Resumo:

Abstract: This study aims to develop a learning model of Self-Care skills for mentally retarded early age children in North Sulawesi. The research was conducted in five exceptional schools in North Sulawesi which includes 10 teachers and 22 mentally retarded early age children. This study used a qualitative approach while methods of research include research and development (R&D) procedures. This Self-Building learning model were developed in four phases, which are (1) requirements analysis, (2) designing model based on the results of requirements analysis, (3) implementation of the learning model, and (4) assess the effectiveness of learning models in accordance with the teaching process. The evaluation process consist of expert matters validation, which are early age education and mentally retarded children experts, and making revision. Validation was implemented by the teachers of mentally retarded exceptional schools before making a revise, first field trials, second field trials and field tests. The trial results used to revise the product. This research resulted in RPP (Learning Implementation Plan) and a handbook for teachers. Conclusions from the study were: Implementation of the resulting learning model was effective to improve the mastery of skills to take off and put on shoes, socks, a shirt, t-shirt, short, skirt for the mentally retarded early age; The substance of the content and design flexibility of the structure of the model are included in the category of effective and the application of teaching learning model will be able to facilitate the teachers of mentally retarded exceptional School Learning Implementation Plan, carry outa learningand undertake an evaluation of learning. Abstrak: Penelitian ini bertujuan untuk mengembangkan model pembelajaran keterampilan bina diri untuk keterbelakangan mandiri pada anak usia dini di Sulawesi Utara. Penelitian ini dilaksanakan di sekolah luar biasa di Sulawesi Utara dengan melibatkan 10 orang guru dan 22 anak usia dini dengan keterbelakangan mental. Penelitian ini menggunakan pendekatan kualitatif dengan metode Research and Development (RnD). Model pembelajaran dilakukan dalam empat asa, yaitu (1) analisis kebutuhan, (2) mendisain model pembelajaran berdasarkan hasil analisis kebutuhan, (3) menerapkan model pembelajaran, dan (4) menilai keefektifan model pembelajaran sesuai dengan proses mengajar. Proses evaluasi berisi validasi meteri oleh ahli, oleh pendidik anak usia dini dan ahli keterbelakangan mental pada anak, dan membuat revisi. Validasi diterapkan oleh guru keterbelakangan mental di sekolah luar biasa sebelum membuat perbaikan, uji coba lapangan pertama, uji coba lapangan kedua, dan uji lapangan. Uji tersebut digunakan untuk memperbaik produk. Penelitian ini menghasilkan RPP (Rencana Pelaksanaan Pembelajaran) dan handbook untuk guru. Kesimpulannya dari penelitian ini adalah: penerapan menghasilkan model pembelajaran yang efektif untuk menghasilkan keterampilan dalam melepaskan dan memakai sepatu, kaus kaki, baju, kaus, dan senda untuk anak keterbelakangan mental. Substansi dari isi dan fleksibilitas desain dari struktur model termasuk didalamnnya kategori efektivitas dan penerapan model pembelajaran dan pengajaran akan mampu memfasilitasi guru di sekolah luar biasa dalam menerapkan pembelajaran, melaksanakan pembelajaran dan melakukan evaluasi pembelajaran.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Supena, Asep. "MODEL PENDIDIKAN INKLUSIF UNTUK SISWA TUNAGRAHITA DI SEKOLAH DASAR". PARAMETER: Jurnal Pendidikan Universitas Negeri Jakarta 29, n.º 2 (9 de junho de 2017): 145–55. http://dx.doi.org/10.21009/parameter.292.03.

Texto completo da fonte

Resumo:

The research aims to produce a model’s implementation of inclusive education for students who are syndromic Mental Retardation in elementary school. Research conducted by the method of research and development (R&D). The research has produced two major findings: (1) a description of the facts and issues of implementation for inclusive education for students who are Syndromic Mental Retardation in elementary school today.; (2) konsep pelaksanaan model pendidikan inklusif bagi siswa tunagrahita di sekolah dasar. The resulted models include 5 main products (1) general guidelines for the implementation of inclusive education, (2) model of curriculum and learning, (3) model lesson plans, (4) evaluation model, (5) syllabus’ lessons in elementary school that have been modified for students who are Syndromic Mental Retardation Abstrak Penelitian ini bertujuan untuk menghasilkan implementasi model tentang pendidikan inklusif bagi siswa yang Tunagrahita di sekolah dasar (SD). Penelitian dilakukan dengan metode penelitian dan pengembangan (R & D). Penelitian ini menghasilkan dua temuan utama, yaitnu (1) deskripsi fakta dan isu-isu implementasi pendidikan inklusif bagi siswa tunagrahita di sekolah dasar saat ini; (2) konsep pelaksanaan model pendidikan inklusif bagi siswa yang Tunagrahita di sekolah dasar. Model hasil meliputi 5 produk utama: (a) panduan umum untuk pelaksanaan pendidikan inklusif, (b) model kurikulum dan pembelajaran, rencana Model (c) pelajaran, (d) model evaluasi, pelajaran (e) silabus 'di sekolah dasar yang telah dimodifikasi bagi siswa yang Tunagrahita.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Evaluation parameter"

Chen, Lu. "Computerized evaluation of parameters for HEMT DC and microwave S parameter models". Ohio : Ohio University, 1995. http://www.ohiolink.edu/etd/view.cgi?ohiou1179518920.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Rückert, Nadja, Robert S. Anderssen e Bernd Hofmann. "Stable Parameter Identification Evaluation of Volatility". Universitätsbibliothek Chemnitz, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-85402.

Texto completo da fonte

Resumo:

Using the dual Black-Scholes partial differential equation, Dupire derived an explicit formula, involving the ratio of partial derivatives of the evolving fair value of a European call option (ECO), for recovering information about its variable volatility. Because the prices, as a function of maturity and strike, are only available as discrete noisy observations, the evaluation of Dupire’s formula reduces to being an ill-posed numerical differentiation problem, complicated by the need to take the ratio of derivatives. In order to illustrate the nature of ill-posedness, a simple finite difference scheme is first used to approximate the partial derivatives. A new method is then proposed which reformulates the determination of the volatility, from the partial differential equation defining the fair value of the ECO, as a parameter identification activity. By using the weak formulation of this equation, the problem is localized to a subregion on which the volatility surface can be approximated by a constant or a constant multiplied by some known shape function which models the local shape of the volatility function. The essential regularization is achieved through the localization, the choice of the analytic weight function, and the application of integration-by-parts to the weak formulation to transfer the differentiation of the discrete data to the differentiation of the analytic weight function.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Clouse, Randy Wayne. "Evaluation of GLEAMS considering parameter uncertainty". Thesis, Virginia Tech, 1996. http://hdl.handle.net/10919/44516.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Clouse, Randy W. "Evaluation of GLEAMS considering parameter uncertainty /". This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-09042008-063009/.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

BORGA, PAULA CECILIA. "DESIGN PARAMETER FOR EVALUATION OF PILE FOUNDATION". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2001. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=2037@1.

Texto completo da fonte

Resumo:

COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
Os projetos de capacidade de suporte de estacas estão baseados em dados de ensaio de campo de maneira direta ou indireta. Devido a sua praticidade, os métodos empíricos são amplamente utilizados. No Brasil os métodos de Decourt e Quaresma (1978, 1982) e de Aoki e Velloso (1975) se destacam. Este trabalho procura avaliar o uso de dados de SPT e CPT para estimativa de parâmetros geotécnicos necessários na previsão de capacidade de suporte de estacas através de métodos teóricos. São apresentadas e avaliadas formulações empíricas de estimativa de parâmetros para materiais granulares e materiais argilosos. Outro elemento importante na previsão da capacidade de suporte é o estado de tensões atuante em torno da estaca que é analisado através de considerações a respeito do coeficiente de empuxo. Finalmente, são mostrados alguns resultados de provas de carga para a análise da seleção de parâmetros e do estado de tensões, além de uma avaliação dos métodos empíricos de previsão de capacidade de suporte.
The main objective of this thesis is to discuss the applicability of in-situ tests like the Standard Penetration Test (SPT) and the Cone Penetration Test (CPT) to determine directly the design parameters to predict the bearing capacity of pile foundations. In case it will be considered the use of empirical correlation to indicate the mechanical properties of the soil in terms of shear resistance, and the application of these values directly in the classic formulation based on the theory of equilibrium limit to evaluate distinctly the shaft and the base resistance of piles. Adaptations of these values will be proceeded considering aspects related with the non-linear behavior of the soil; the mechanism of load transfer and the influence of the constructive aspects.The results obtained through this new methodology will be compared with experimental results, obtained from static and dynamic load tests and also with other empiric procedures that use the results obtained from in-situ tests to evaluate directly the bearing capacity of deep foundations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Yao, Zhengrong. "Model Based Coding : Initialization, Parameter Extraction and Evaluation". Doctoral thesis, Umeå University, Applied Physics and Electronics, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-434.

Texto completo da fonte

Resumo:

This thesis covers topics relevant to model-based coding. Model-based coding is a promising very low bit rate video coding technique. The idea behind this technique is to parameterize a talking head and to extract and transmit the parameters describing facial movements. At the receiver, the parameters are used to reconstruct the talking head. Since only high-level animation parameters are transmitted, very high compression can be achieved with this coding scheme. This thesis covers the following three key problems.

Although it is a fundamental problem, the initialization problem, has been neglected some extent in the literature. In this thesis, we pay particular attention to the study of this problem. We propose a pseudo-automatic initialization scheme: an Analysis-by-Synthesis scheme based on Simulated Annealing. It has been proved to be an efficient scheme.

Owing to technical advance today and the newly emerged MPEG-4 standard, new schemes of performing texture mapping and motion estimation are suggested which use sample based direct texture mapping; the feasibility of using active motion estimation is explored which proves to be able to give more than 10 times tracking resolution. Based on the matured face detection technique, Dynamic Programming is introduced to face detection module and work for face tracking.

Another important problem addressed in this thesis is how to evaluate the face tracking techniques. We studied the evaluation problems by examining the commonly used method, which employs a physical magnetic sensor to provide "ground truth". In this thesis we point out that it is quite misleading to use such a method.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Banis, Y. Norouzi. "Data provision and parameter evaluation for erosion modelling". Thesis, University of Newcastle Upon Tyne, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242445.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lundberg, Ted. "Analysis of simplified dynamic truck models for parameter evaluation". Thesis, KTH, Fordonsdynamik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-177304.

Texto completo da fonte

Resumo:

The ride comfort in heavy commercial trucks is an important property that requires detailed testing to investigate how different vehicle components affect the response to road input. Trucks come in many different configurations and a customer purchasing a new truck often has the choice to specify number of axles, drive line and cabin type, type of suspension and so on. This gives that there are many vehicle variations that have to be tested to ensure good ride comfort. Testing many combinations of, for example, dampers in different environments and road conditions might be time consuming. The work could be helped by pre-test computer simulations where the vehicle is simulated with the same conditions as in the tests. The simulation results could then be used to better understand how different components affect the vehicle response to a certain road input. By using a MultiBody System (MBS) software, a full truck could be modeled and simulated to acquire accurate results. The simulation would however be computationally demanding and take long time. It also requires that the test engineer is familiar with the MBS software to be able to create the model and run the simulations. This thesis focuses on investigating if simplified dynamic truck models developed in Matlab could be an alternative to more complex models created in an MBS software. Three different models are developed: a quarter car model, a 2D half truck model and a 3D truck model. The models are derived using the Lagrangian energy method and the dynamic response from a given road input is calculated numerically in Matlab. Different methods of solving the systems of differential equations are discussed and the implementation of the implicit Newmark -method is explained. To validate the truck models and solver, the models are replicated in the MBS software Adams View. The response of the Adams and Matlab models from an excitation on the wheels are compared to determine that the equations and solver are correctly derived and implemented. To test the models capabilities to predict the response in a real truck, tests on a road simulator are performed. A four-wheel Scania tractor is tested in a hydraulic road simulator rig. The road simulator excited the truck through the wheels with a sinus sweep from 0-20 Hz and the resulting accelerations in the tractor are measured. Three different setups of front axle dampers are tested to get a parameter variation to study with the models: a standard damper, harder damper and undamped front axle. The same tests are simulated in Matlab and the acceleration responses are compared to see how well the models predict the accelerations seen in the real truck. The models in Matlab and Adams give the same results and are therefore reasoned to be mathematically correct. The Newmark -method is efficient and gives reasonable computing times. In the comparison with the road simulator test the models do not give the same results as measured on the truck. To be able to compare the results from the measurements and simulations, the tire stiffnesses have to be trimmed so that the correct eigenfrequency of the axles are found. The results with modified tire stiffnesses give better results but still with considerable deviations from the experimental results. The measurements on the truck show that the eigenfrequency of the front axle decrease when removing the front axle damper while the models show that the eigenfrequency increase. Also there are differences in the acceleration measured in the cabin and frame as the models do not predict many of the higher eigenfrequencies. In conclusion it is discussed that the models have to be more complex to give useful information about the effects of variation of dampers on the axles. It is also discussed that using commercially available software to perform the same simulations might be a better alternative that gives the user more freedom to overlook and make changes to the model.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Patil, Vivek. "Criteria for Data Consistency Evaluation Prior to Modal Parameter Estimation". University of Cincinnati / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1627667589352536.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Batley, Rose-Marie. "The effects on parameter estimation of correlated dimensions and a differentiated ability in a two-dimensional, two-parameter item response model". Thesis, University of Ottawa (Canada), 1989. http://hdl.handle.net/10393/21362.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Evaluation parameter"

Estimating output-specific efficiencies. Dordrecht: Kluwer Academic, 2002.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Liner, R. T. Progress reviews of six safety parameter display systems. Washington, DC: Division of PWR Licensing-A, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Glas, Cees A. W. A Bayesian approach to item calibration and evaluation of parameter drift. Newtown, PA: Law School Admission Council, 2005.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Orme, John S. Subsonic flight test evaluation of a propulsion system parameter estimation process for the F100 engine. Edwards, Calif: Dryden Flight Research Facility, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Maine, Trindel A. A preliminary evaluation of an F100 engine parameter estimation process using flight data. Moffett Field, Calif: Ames Research Center, 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

B, Gilyard Glenn, Lambert Heather H e United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. A preliminary evaluation of an F100 engine parameter estimation process using flight data. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

King, Stevens David, e Robert S. Kerr Environmental Research Laboratory., eds. Sensitive parameter evaluation for a vadose zone fate and transport model: Project summary. Ada, OK: U.S. Environmental Protection Agency, Robert S. Kerr Environmental Research Laboratory, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hoff, J. C. Initial evaluation of the modified stepwise regression procedure to estimate aircraft stability and control parameters from flight test data. Cranfield, Bedford, England\: Cranfield University, College of Aeronautics, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

B, Gilyard Glenn, e United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Subsonic flight test evaluation of a propulsion system parameter estimation process for the F-10 engine. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Groschen, G. E. Evaluation of measurements collected with multi-parameter continuous water-quality monitors in selected Illinois streams, 2001-03. Reston, Va: U.S. Geological Survey, 2005.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Evaluation parameter"

Young, Nicholas P., e Nitash P. Balsara. "Evaluation of χ Parameter". In Encyclopedia of Polymeric Nanomaterials, 1–11. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36199-9_78-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Young, Nicholas P., e Nitash P. Balsara. "Evaluation of χ Parameter". In Encyclopedia of Polymeric Nanomaterials, 747–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-29648-2_78.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Allemang, R. J., e A. W. Phillips. "Experimental Modal Parameter Evaluation Methods". In Handbook of Experimental Structural Dynamics, 615–80. New York, NY: Springer New York, 2022. http://dx.doi.org/10.1007/978-1-4614-4547-0_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Allemang, R. J., e A. W. Phillips. "Experimental Modal Parameter Evaluation Methods". In Handbook of Experimental Structural Dynamics, 1–66. New York, NY: Springer New York, 2021. http://dx.doi.org/10.1007/978-1-4939-6503-8_12-2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Allemang, R. J., e A. W. Phillips. "Experimental Modal Parameter Evaluation Methods". In Handbook of Experimental Structural Dynamics, 1–66. New York, NY: Springer New York, 2020. http://dx.doi.org/10.1007/978-1-4939-6503-8_12-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Siemiński, Andrzej. "Ant Colony Optimization Parameter Evaluation". In Advances in Intelligent Systems and Computing, 143–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-32335-5_14.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Arming, Sebastian, Ezio Bartocci, Krishnendu Chatterjee, Joost-Pieter Katoen e Ana Sokolova. "Parameter-Independent Strategies for pMDPs via POMDPs". In Quantitative Evaluation of Systems, 53–70. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99154-2_4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bortolussi, Luca, Dimitrios Milios e Guido Sanguinetti. "U-Check: Model Checking and Parameter Synthesis Under Uncertainty". In Quantitative Evaluation of Systems, 89–104. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22264-6_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Okamura, Hiroyuki, e Tadashi Dohi. "mapfit: An R-Based Tool for PH/MAP Parameter Estimation". In Quantitative Evaluation of Systems, 105–12. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22264-6_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Böhme, Johann F. "Parameter Estimation in Array Processing". In Signal Processing and Pattern Recognition in Nondestructive Evaluation of Materials, 307–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-83422-6_21.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Evaluation parameter"

Kercel, Stephen W. "Separation of Lamb waves by Bayesian parameter estimation". In QUANTITATIVE NONDESTRUCTIVE EVALUATION. AIP, 2002. http://dx.doi.org/10.1063/1.1472803.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Al-Muhairi, Hassan, Martin Fleury e Adrian F. Clark. "Parameter-orientated segmentation algorithm evaluation". In 2011 IEEE GCC Conference and Exhibition (GCC). IEEE, 2011. http://dx.doi.org/10.1109/ieeegcc.2011.5752478.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sun, Hongwei, Fei Yan, Hao Gu e Ying Li. "Acoustic metamaterial with negative parameter". In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, editado por H. Felix Wu, Tzu-Yang Yu, Andrew L. Gyekenyesi e Peter J. Shull. SPIE, 2014. http://dx.doi.org/10.1117/12.2035707.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mansoor, Shamyl Bin, Zaheer Mukhtar, Muddassir Malik, Zohaib Amjad e Hammad Qureshi. "Parameter evaluation for virtual Laparoscopic simulation". In 2011 7th International Conference on Emerging Technologies (ICET). IEEE, 2011. http://dx.doi.org/10.1109/icet.2011.6048481.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gonzalez, Oliver. "Electrical Parameter Evaluation of Photovoltaic Inverters". In 2018 IEEE 38th Central America and Panama Convention (CONCAPAN XXXVIII). IEEE, 2018. http://dx.doi.org/10.1109/concapan.2018.8596434.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gamperl, Florian. "Well Success – An Interdisciplinary Evaluation Parameter". In SPE Middle East Oil and Gas Show and Conference. Society of Petroleum Engineers, 2019. http://dx.doi.org/10.2118/194815-ms.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Duhoon, V., e R. Bhardwaj. "Artificial Intelligence Technique for Weather Parameter Forecasting". In 2021 International Conference on Computational Performance Evaluation (ComPE). IEEE, 2021. http://dx.doi.org/10.1109/compe53109.2021.9751934.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wang, Wei-Chih, Yu-Hsin Chiang, Chun-Wei Wu e Benjamin Estroff. "Inkjet-printed multi-parameter measuring sensor". In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, editado por Vijay K. Varadan. SPIE, 2017. http://dx.doi.org/10.1117/12.2260413.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wen, Chang-Jun, Xin Liu e Xin Cheng. "Parameter Evaluation of 3-parameter Weibull Distribution based on Adaptive Genetic Algorithm". In 2017 2nd International Conference on Machinery, Electronics and Control Simulation (MECS 2017). Paris, France: Atlantis Press, 2017. http://dx.doi.org/10.2991/mecs-17.2017.78.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Shin, H., e M. Polikar. "Simple Thermal Efficiency Parameter as an Economic Indicator for SAGD Performance". In SPE Hydrocarbon Economics and Evaluation Symposium. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/94630-ms.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Evaluation parameter"

Hodgkiss, W. S., e P. Gerstoft. Geoacoustic Inversion and the Evaluation of Model and Parameter Uncertainties. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2006. http://dx.doi.org/10.21236/ada612630.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Decker, David, e Charalambos Papelis. Evaluation of Surface Complexation Models for Radionuclide Transport at the Nevada Test Site: Data Availability and Parameter Evaluation. Office of Scientific and Technical Information (OSTI), maio de 2003. http://dx.doi.org/10.2172/1466729.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hrubesh, L., e T. W. McGann. Process Parameter Evaluation and Optimization for Advanced Material Development Final Report CRADA No. TC-1234-96. Office of Scientific and Technical Information (OSTI), outubro de 2017. http://dx.doi.org/10.2172/1406420.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

K. Rehfeldt. Data Analysis for Infiltration Modeling: Techical Evaluation of Previous Soil Depth Estimation Methods and Develoment of Aternate Parameter Values. Office of Scientific and Technical Information (OSTI), julho de 2006. http://dx.doi.org/10.2172/899229.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kalyon, Dilhan M. Evaluation of the Design and Process Parameter Selection for LOVA Plant and Degree of Mixedness Analyses of LOVA Formulations. Fort Belvoir, VA: Defense Technical Information Center, novembro de 1995. http://dx.doi.org/10.21236/ada311715.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Silva, Mario, Tor Bjørnstad e Sissel Opsahl Viig. Tracer-based interwell Sor-monitoring and evaluation of efficiency in EOR-methods. University of Stavanger, novembro de 2021. http://dx.doi.org/10.31265/usps.207.

Texto completo da fonte

Resumo:

A partitioning inter-well tracer test (PITT) determines the residual (or even remaining) oil saturation (SOR) in the flooded region between well-pairs. This type of tracer test can be used to identify improved oil recovery (IOR) targets, evaluate IOR projects, evaluate enhanced oil recovery (EOR) methods, and improve reservoir description for efficient hydrocarbon production. Thus, the main objective of the work with inter-well oil/water partitioning tracers developed within the framework of the IOR Centre is to provide tools and methodologies to improve reservoir description for efficient management of resources. The present report aims to provide insight to its users on the deployment of tracer technology in the inter- well region of water-flooded reservoirs to determine SOR. In turn, this parameter can be used as basis to evaluate the efficiency of several oil-production related operations. It will explain workflows, expertise, and tools needed as well as the importance of the information obtained, and methods to obtain it. This report is directed towards operators, primarily to reservoir engineers and reservoir managers, and service companies, particularly those already engaged on the deployment of tracer technology or those who aim to begin this activity. R&D personnel working in both operators and service companies may also benefit from the contents of the present report.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!