Conecte-se

Bibliografias temáticas / Evenki imprints / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Evenki imprints.

Artigos de revistas sobre o tema "Evenki imprints"

Autor: Grafiati

Publicado: 25 de julho de 2024

Última modificação: 31 de julho de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 18 melhores artigos de revistas para estudos sobre o assunto "Evenki imprints".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Lariviere, David, Val Anderson, Robert Johnson, Tyson Terry, and Thomas Bates. "Effects of Cattle Traffic on Sclerocactus wrightiae." Land 12, no. 4 (2023): 853. http://dx.doi.org/10.3390/land12040853.

Texto completo da fonte

Resumo:

Cattle grazing has been a historic use of rangelands in Utah since pioneer settlement in the mid-1800’s. Wright fishhook cactus is a small globose cactus endemic to an area of 280,000 ha in south–central Utah and was listed as endangered in October of 1979, by the U.S. Fish and Wildlife Service (USFWS). By 2010, concerns were expressed that soil compaction in proximity to the cactus posed a threat to this species, though there were no empirical data to support such concerns. In order to assess the impact of cattle traffic on Wright fishhook cactus, we used an imprint device to simulate a cow t

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Ariani, Marisa Dwi, Ade Zuhrotun, Panagiotis Manesiotis, and Aliya Nur Hasanah. "Magnetic Molecularly Imprinted Polymers: An Update on Their Use in the Separation of Active Compounds from Natural Products." Polymers 14, no. 7 (2022): 1389. http://dx.doi.org/10.3390/polym14071389.

Texto completo da fonte

Resumo:

During the last few years, separation techniques using molecularly imprinted polymers (MIPs) have been developed, making breakthroughs using magnetic properties. Compared to conventional MIPs, magnetic molecularly imprinted polymers (MMIPs) have advantages in sample pretreatment due to their high specificity and selectivity towards analytes as a result of their larger specific surface areas and highly accessible specific binding sites. The techniques of isolation of active compounds from natural products usually require very long process times and low compound yields. When MMIPs are used in sa

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Amanda, Eviomitta Rizki, Lia Wanda Oktavianti, Mareta Nur Aisyah, Cindy Izatin Azizah, and Lilik Nurfadlilah. "Selectivity of Molecularly Imprinted Polymer-based Chitosan Membrane for Caffeine Separation by Filtration." Jurnal Riset Kimia 16, no. 1 (2025): 71–79. https://doi.org/10.25077/jrk.v16i1.767.

Texto completo da fonte

Resumo:

Caffeine is a chemical compound that can be isolated from coffee beans. The isolation and purification of caffeine compounds have been successfully carried out using a filtration method using chitosan biomaterial synthesized by molecularly imprinted polymer (MIP). Chitosan as a functional polymer is dissolved in acetic acid (2% v/v) with stirring at 60°C overnight until a clear and homogeneous solution is formed. Furthermore, caffeine as a template molecule is added to the polymer solution and stirred for 60 minutes. The polymer solution is poured into a petri dish until evenly distributed and

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Berger, Mario, Manuel Mattheisen, Bettina Kulle, et al. "High factor VIII levels in venous thromboembolism show linkage to imprinted loci on chromosomes 5 and 11." Blood 105, no. 2 (2005): 638–44. http://dx.doi.org/10.1182/blood-2004-05-2018.

Texto completo da fonte

Resumo:

AbstractHigh factor VIII (FVIII) levels are known to be a risk factor for deep venous thrombosis, but the mechanisms responsible for high FVIII levels remain unclear. Here, a new phenotype “FVIII level residuum” (FVIII-R) was defined in order to eliminate the impact of common determinants on FVIII levels. We studied 13 families of patients with thrombosis and reproducibly high FVIII levels of unknown origin. Since familial clustering was evident, we looked for a possible genetic basis. A genome scan was performed with 402 evenly spaced microsatellite markers. A quantitative linkage analysis us

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Xiao, Jing, Ziyuan Li, Jian Sun, and Qinzheng Yang. "Modified pectin as imprinting substrate to immobilize pectinase via both adsorption and crosslinking." BioResources 14, no. 4 (2019): 9364–74. http://dx.doi.org/10.15376/biores.14.4.9364-9374.

Texto completo da fonte

Resumo:

A broad-spectrum substrate-imprinted adsorption and crosslinking double immobilized pectinase (SDP) was prepared using a universal modified pectin obtained through enzymatic hydrolysis as the imprinting substrate. Its structure was characterized by infrared spectroscopy, circular dichroism, and scanning electron microscopy. The results showed that 1) cross-linking increased the Schiff base in SDP, 2) immobilization barely changed the secondary structure such as α-helix and β-sheet of SDP, and 3) adhesives were evenly distributed on the surface after immobilization. Studies on the enzymatic pro

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Reniță, Gheorghe. "The prejudicial act of the offense of manipulation of an event." Revista Institutului Național al Justiției 3, no. 54 (2020): 27–33. https://doi.org/10.5281/zenodo.4061178.

Texto completo da fonte

Resumo:

The objective side of the offence comprises a total of legally relevant signs that give the seal or external imprint of the offence. In this respect, the objective side of the offence provided in Article 242<sup>1</sup> “Manipulation of an event” of the Criminal Code of the Republic of Moldova consists of only one sign, <em>i.e.</em>: the prejudicial act. At the same time, the prejudicial act of this crime consists in encouraging, instructing or influencing a participant in a sporting event or a betting event to have a conduct contrary to the principle of <em>fair play</em>. In ess

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Park, Changbom, Jaehyun Lee, Juhan Kim, et al. "Formation and Morphology of the First Galaxies in the Cosmic Morning." Astrophysical Journal 937, no. 1 (2022): 15. http://dx.doi.org/10.3847/1538-4357/ac85b5.

Texto completo da fonte

Resumo:

Abstract We investigate the formation and morphological evolution of the first galaxies in the cosmic morning (10 ≳ z ≳ 4) using the Horizon Run 5 (HR5) simulation. For galaxies above the stellar mass M ⋆ , min = 2 × 10 9 M ⊙ , we classify them into disk, spheroid, and irregular types according to their asymmetry and stellar-mass morphology. We find that about two-thirds of the galaxies have a Sérsic index <1.5, reflecting the dominance of disk-type morphology in the cosmic morning. The rest are evenly distributed as incidental and transient irregulars or spheroids. These fractions are roug

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Алексеева, С. А. "Mental practices of the development of the North: strategies for the adaptation of indigenous peoples of the North to the cold world." Arctic XXI century. Humanities, no. 1(31) (March 6, 2023): 37–43. http://dx.doi.org/10.25587/svfu.2023.81.94.004.

Texto completo da fonte

Resumo:

На основе междисциплинарной методологии новой культурно-интеллектуальной истории в рамках коллективного проекта проведен анализ формирования и изменения ментального мира жителей «холодного мира» в разных этноконтактных зонах северо-востока РФ. Выделен культурный код ментальной «северности», отличающийся особым видением и пониманием мира, трепетным отношением к природе, к окружающей среде, что обусловлено региональными особенностями традиционного мировоззрения коренных малочисленных народов Севера. Отношение человека к природе и его место в ней формируют способы представления и комплекс мировид

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Müller, Katrin, Jordis S. Tradowsky, Peter von der Gathen, et al. "Measurement report: The Palau Atmospheric Observatory and its ozonesonde record – continuous monitoring of tropospheric composition and dynamics in the tropical western Pacific." Atmospheric Chemistry and Physics 24, no. 4 (2024): 2169–93. http://dx.doi.org/10.5194/acp-24-2169-2024.

Texto completo da fonte

Resumo:

Abstract. The tropical western Pacific is recognized as an important region for stratosphere–troposphere exchange but lies in a data-sparse location that had a measurement gap in the global ozone sounding network. The Palau Atmospheric Observatory (PAO, approx. 7.3∘ N, 134.5∘ E) was established to study the atmospheric composition above the remote tropical western Pacific with a comprehensive instrumental setup. Since 2016, two laboratory containers in Palau host a Fourier transform infrared spectrometer; a lidar (micro-lidar until 2016, cloud and aerosol lidar from 2018); a Pandora 2S photome

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Kim, Choeun, and Youngseung Na. "Reinforced Metal Bipolar Plate Structure with Stiffening Rib Channel for Proton Exchange Membrane Fuel Cell." ECS Meeting Abstracts MA2022-01, no. 37 (2022): 1647. http://dx.doi.org/10.1149/ma2022-01371647mtgabs.

Texto completo da fonte

Resumo:

Clean energy has become a concern because fossil fuels are the primary cause of climate change and air pollution. A proton exchange membrane fuel cell (PEMFC) is an environmentally friendly vehicle's alternative energy source. Bipolar plates, gaskets, gas diffusion layers, and a membrane electrode assembly (MEA) constitute a PEMFC. The bipolar plate accounts for a large portion of the fuel cell stack cost. Metallic bipolar plates are utilized in vehicle fuel cell stacks because of its low fabrication cost, high manufacturability, mechanical strength, and low weight. Despite the benefits, a thi

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Kaewbuadee, Kansichaya, Kasinart Paiboonsisijit, Narada Nutchanart, Boonyanit Thaweboon, and Sroisiri Thaweboon. "The Antimicrobial Potential of Vanillin-Incorporated Irreversible Hydrocolloid Impression Material." Key Engineering Materials 942 (March 24, 2023): 77–82. http://dx.doi.org/10.4028/p-g78m10.

Texto completo da fonte

Resumo:

The hydrocolloid impression material is one of the most important materials extensively used in several procedures in the dental field. It is mainly applied for diagnostic and planning in the rehabilitation of oral, orthodontic, and maxillofacial prostheses due to its biocompatibility with the oral tissues, low toxicity, ease of use, and relatively low cost. When doing the impression, the material might be contaminated with blood, saliva, and biofilm from within the patient’s mouth. In these procedures, there are high chance that the microorganisms can be transmitted from patients to the casti

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

А.Р., Бирман, Зубова О.В. та Угрюмов С.А. "Разработка стенда для определения потребной толщины многослойных дорожных одежд лесных дорог". Гидросфера. Опасные процессы и явления 1, № 6 (2024): 76–82. http://dx.doi.org/10.34753/hs.2024.6.1.76.

Texto completo da fonte

Resumo:

Основными механическими характеристиками, определяющими эксплуатационные показатели лесной дороги, являются модуль деформации, характеризующий жесткость грунта в основании и его сопротивляемость деформации, а также модуль упругости, характеризующий как деформационные, так и прочностные свойства грунтов. Одним из главных параметров, определяющих величины указанных модулей, является величина деформации грунта, передаваемая через толщу дорожной одежды. Применяемые в настоящее время методики расчета нежестких дорожных одежд, как аналитические, так и экспериментальные, являются достаточно сложными

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Meng, Jun-Ling, Peng-Fei Sun, Shui-Ting Zhou, Yue Li, Lu-Wen Chen, and Rui Mao. "Study on the influence of belt angle on tire grounding characteristics under longitudinal slip conditions." Journal of Engineered Fibers and Fabrics 19 (January 2024). http://dx.doi.org/10.1177/15589250241252633.

Texto completo da fonte

Resumo:

Using ABAQUS software as a tool and 225/60R18 tire as the research object, a finite element model of the tire was established and longitudinal slip simulation was conducted based on the completion of longitudinal slip and rubber material tests. By comparing the tire-pavement contact stress under longitudinal slip conditions with different angles of belt layers and the stress on the first belt steel cord, the influence of different angles of belt layers on the grounding characteristics of tires were analyzed. The results showed that under static loading conditions, the trend of tire-pavement co

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Yu, Shuai, Zhichao Zhang, Jing Li, et al. "Genome-wide identification and characterization of lncRNAs in sunflower endosperm." BMC Plant Biology 22, no. 1 (2022). http://dx.doi.org/10.1186/s12870-022-03882-5.

Texto completo da fonte

Resumo:

Abstract Background Long non-coding RNAs (lncRNAs), as important regulators, play important roles in plant growth and development. The expression and epigenetic regulation of lncRNAs remain uncharacterized generally in plant seeds, especially in the transient endosperm of the dicotyledons. Results In this study, we identified 11,840 candidate lncRNAs in 12 day-after-pollination sunflower endosperm by analyzing RNA-seq data. These lncRNAs were evenly distributed in all chromosomes and had specific features that were distinct from mRNAs including tissue-specificity expression, shorter and fewer

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Sun, Hong‐Wen, Tian‐Hua Tang, Jing‐Sheng Wang, Li‐Jun Gu, Yan‐Chun Huang, and Ya‐Ru Li. "Research on the influence of stamping materials on resist flow and the residual layer in thermal nanoimprint lithography." Micro & Nano Letters 18, no. 9-12 (2023). http://dx.doi.org/10.1049/mna2.12175.

Texto completo da fonte

Resumo:

AbstractVarious stamp materials can significantly affect the filling quality of nanoimprint lithography (NIL). The effects of different stamp materials on the imprinting process were investigated from the angles of residual layer (RL) thickness, contact pressure, and filling proportion. The selection of various stamp materials affects the thickness and uniformity of the RL. Soft stamps (PDMS, PU) leave a thin but uneven RL distribution, while the RL imprinted by hard stamps (Si, Ni) is thicker but more uniform. The contact pressure using soft stamps is relatively more evenly distributed than h

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

A, Kostorrizos, Spiliopoulou C, Moraitis K, and Papadodima S. "Determination of Firing Distance based on Pellet Dispersion." Austin Journal of Forensic Science and Criminology 10, no. 1 (2023). http://dx.doi.org/10.26420/austinjforensicscicriminol.2023.1094.

Texto completo da fonte

Resumo:

According to literature, practice and experience, the firing distance from shotguns (i.e., the distance between the victim and the muzzle of the gun) can be determined fairly accurately by studying and evaluating the pellet dispersion pattern after shooting a target surface, either on clothing or on the victim’s body. Many formulas have been published in order to determine the range at which a shotgun has been discharged, as well as the parameters that affect the calculation of the estimated firing distance. Τhe purpose of the current study was to provide answers to questions regarding firing

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Shahlo, Abdusaitova. "STORY TYPES AND DISTINCTIVE ASPECTS." May 20, 2023. https://doi.org/10.5281/zenodo.7952273.

Texto completo da fonte

Resumo:

In fiction, such primordially literary themes connected with human nature and the psyche should miraculously and uniquely be reflected in the story, the smallest, miraculous genre of the epic type. The genre of the story acquires an ideological and emotional value due to its conciseness, form and content, compositional structure, originality of language, style and other poetic elements. In it, the heroes can appear on the stage ready, and in the process of depicting reality, they can become an integral image-character.This aspect depends on the style of narration, the artistic intention, or ra

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Pedersen, Troels H., and Torben A. Lenau. "Variable Geometry Casting of Concrete Elements Using Pin-Type Tooling." Journal of Manufacturing Science and Engineering 132, no. 6 (2010). http://dx.doi.org/10.1115/1.4003122.

Texto completo da fonte

Resumo:

Today, free-form parts are made in small production volume with time consuming methods and a significant amount of material waste. These methods include computer numerical control (CNC)-machining and the layered rapid prototyping techniques stereolithography apparatus (SLA), selective layer sintering (SLS), fused deposition modeling (FDM), 3D print, etc., which are well suited for smaller parts that are rich in detail. Variable geometry molds (VGMs) offer a different approach to small production volume. A die or mold can change shape between the castings, and parts with a different geometry ca

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!