Bibliografias temáticas / Finite element method Computer programs

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Finite element method Computer programs"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 29 de janeiro de 2023

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Finite element method Computer programs".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Finite element method Computer programs"

1

Agapov, Vladimir P., and Alexey S. Markovich. "Dynamic method for determining critical loads in the PRINS computer program." Structural Mechanics of Engineering Constructions and Buildings 16, no. 5 (December 15, 2020): 380–89. http://dx.doi.org/10.22363/1815-5235-2020-16-5-380-389.

Texto completo da fonte
Resumo:
Relevance. Buckling analysis is important in the design of buildings and structures. It is used in various fields of engineering - mechanical engineering, aircraft and shipbuilding, civil engineering, etc. Until the second half of the twentieth century, mainly analytical methods of buckling were applied in practice. With the appearance of computers, numerical methods, in particular, the finite element analysis, began to prevail. Buckling analysis was implemented in programs of finite element analysis, such as NASTRAN, ANSYS, ABAQUS, ADAMS, DIANA, and others. In view of great responsibility, bu
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Mufti, A. A., G. Tadros, and A. C. Agarwal. "On the use of finite element programs in structural evaluation and development of design charts." Canadian Journal of Civil Engineering 21, no. 5 (October 1, 1994): 797–804. http://dx.doi.org/10.1139/l94-086.

Texto completo da fonte
Resumo:
In many phases of structural design and analytical evaluation, the solution of stress and strain distribution in an elastic continuum is required. Special cases of such problems may range from two-dimensional plane stress or plain strain distribution, plate bending to analysis of fully three-dimensional solids. The finite element programs are often used to predict the critical regions for stress analysis and design. Stresses are generally of greater practical importance than displacements for structural design and evaluation. Most of the finite element computer programs calculate element stres
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Maslennikov, A. M., E. A. Kobelev, and N. A. Maslennikov. "Solution of sustainability tasks by finite element method." Вестник гражданских инженеров 17, no. 2 (2020): 68–74. http://dx.doi.org/10.23968/1999-5571-2020-17-2-68-74.

Texto completo da fonte
Resumo:
New functions are proposed to describe the deformed state of rods upon loss of stability for two types of rods with different boundary conditions. To solve stability problems with a kinematic uncertainty number of more than two, it is recommended to reduce solution to a characteristic equation with the further use of computer programs with matrix operations. For this purpose, a stiffness matrix and potential loading matrix were developed for the adopted functions. Following the example of classical displacement method for the mentioned rods, there was developed a table of reactions for single
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Tin, Trinh Van. "The motion equation of turbine blade by the finite element method." Vietnam Journal of Mechanics 15, no. 4 (December 31, 1997): 42–48. http://dx.doi.org/10.15625/0866-7136/10219.

Texto completo da fonte
Resumo:
In this paper, the finite element method has been applied to deriving the motion equation of turbine blade in coupled bending - bending - torsion vibrations. These equations permit us to develop straightforwardly digital computer programs for studying vibration problems of turbine blades in turbo machinery as well as in other structural dynamic applications.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Marufiy, A., and E. Rysbekova. "Specific Design Solution for Covering Large Areas With Spatial Metal Truss." Bulletin of Science and Practice 7, no. 12 (December 15, 2021): 160–68. http://dx.doi.org/10.33619/2414-2948/73/22.

Texto completo da fonte
Resumo:
. The relevance of the research results given in the article lies in the need to apply new constructive solutions for large spaces. The purpose of this work is to search for new design solutions for covering large areas with spatial metal trusses. The problems of forming a computational spatial bar finite element model of a steel spatial truss of a dome-shaped radial-ring structure were solved. The calculation of the spatial system was carried out using the finite element method of current computer programs, new constructive solutions for spatial metal trusses were adopted. The stress-strain s
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Serrette, R. L. "An introduction to the finite element method using basic programs." Mechanism and Machine Theory 27, no. 6 (November 1992): 751. http://dx.doi.org/10.1016/0094-114x(92)90073-q.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Kosasih, P. B. "Learning Finite Element Methods by Building Applications." International Journal of Mechanical Engineering Education 38, no. 2 (April 2010): 167–84. http://dx.doi.org/10.7227/ijmee.38.2.7.

Texto completo da fonte
Resumo:
This paper describes how programming projects are used to help students understand the theory of finite element (FE) methods in the author's class. The implementation of FE theory in FE-based commercial software is made clearer through programming simple FE analysis codes. From the experience gained in the coding, students have a better understanding of the theory and numerical processes used in FE commercial software. As a result, they have more confidence in using commercial software, knowing that the computer programs are not simply ‘black boxes’ that process data and produce colourful resu
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Choporov, S. V., M. S. Ihnatchenko, O. V. Kudin, A. G. Kryvokhata, and S. I. Homeniuk. "IMPLEMENTATION OF A FINITE ELEMENT CLASS LIBRARY USING GENERALIZED PROGRAMMING." Radio Electronics, Computer Science, Control, no. 2 (July 10, 2021): 164–73. http://dx.doi.org/10.15588/1607-3274-2021-2-17.

Texto completo da fonte
Resumo:
Context. For computer modeling of complex objects and phenomena of various nature, in practice, the numerical finite element method is often used. Its software implementation (especially for the study of new classes of problems) is a rather laborious process. The high cost of software development makes the development of new approaches to improving the efficiency of programming and maintenance (including the addition of new functions) urgent. Objective. The aim of the work is to create a new effective architecture of programs for finite element analysis of problems in mathematical physics, whi
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Verbovoy, A. Y., M. L. Sieryk, I. V. Pavlenko, and A. A. Rudenko. "CALCULATION OF THE CENTRIFULAL PUMP CRITICAL FREQUENCIES BASED ON ITS DISCRETE MATHEMATICAL MODEL." Journal of Numerical and Applied Mathematics, no. 1 (135) (2021): 43–52. http://dx.doi.org/10.17721/2706-9699.2021.1.05.

Texto completo da fonte
Resumo:
Calculations of the centrifugal machines critical frequencies of the rotors are currently carried out on the basis of the finite element method using multi-functional software as same as ANSYS and other similar, that work with finite elements of the three-dimensional type, as well as some specialized computer programs working with the beam-type finite elements. Anyway, the finite element method is used. But in this case an user needs a lot of time for prepation of the initial data. Therefore, this article presents a calculation of the critical frequencies of the rotor of a centrifugal fuel pum
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

PLENGKHOM, K., and W. KANOK-NUKULCHAI. "AN ENHANCEMENT OF FINITE ELEMENT METHOD WITH MOVING KRIGING SHAPE FUNCTIONS." International Journal of Computational Methods 02, no. 04 (December 2005): 451–75. http://dx.doi.org/10.1142/s0219876205000594.

Texto completo da fonte
Resumo:
This paper presents an enhancement of the finite element method (FEM) by adopting the moving Kriging (MK) interpolation as a substitute for the traditional hat functions. The MK shape functions can be referred as element-free because their construction is not tied to the element geometry. Kriging interpolation is a geostatistical technique for spatial interpolation. The basic idea of Kriging is that any unknown point can be interpolated from known scatter points in a specific domain. Using the moving Kriging interpolation, shape functions can be generated over any finite set of nodes. This lea
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Finite element method Computer programs"

1

Brown, Steven Andrew. "Development of a coupled finite element - boundary element program for a microcomputer." Thesis, Virginia Tech, 1985. http://hdl.handle.net/10919/45713.

Texto completo da fonte
Resumo:
This thesis describes the development of a coupled finite element — boundary element program for a microcomputer. The steps outlined in the thesis include the adaptation of a mainframe—based boundary element code for use on a microcomputer, the Verification of this program with sample problems, the development of an algorithm for coupling the Finite Element Method to the Boundary Element Method, the implementation of the coupling algorithm with finite element and boundary element codes, including the development of a Constant Strain Triangular finite element, and the Verification of the coupl
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

McDavid, Charles Scott. "Weight optimum arch structures." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA245954.

Texto completo da fonte
Resumo:
Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, December 1990.<br>Thesis Advisor(s): Salinas, David. "December 1990." Description based on title screen as viewed on April 1, 2010. DTIC Identifier(s): Arches, Stress Analysis, Weight, Finite Element Analysis, Computer Programs, Optimization, Theses, Degrees Of Freedom, FORTRAN, Stiffness, Case Studies. Author(s) subject terms: Finite Element Method, Arches, Weight Optimization. Includes bibliographical references (p. 107). Also available in print.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Wadham-Gagnon, Matthew. "Hyperelastic modelling of rubber behaviour in finite element software." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=99797.

Texto completo da fonte
Resumo:
Experimental characterisation of rubber in uniaxial, equi-biaxial and planar tension under cyclic quasi-static loading shows strain-induced stress softening, hysteresis and unrecoverable strain. The objective of this work is to study the applications and limitations involved in predicting the behaviour of rubber with hyperelastic models. To assume a preconditioned perfectly elastic material, the data obtained from experiments must first be simplified. The data is then fitted to popular hyperelastic models in the finite element analysis (FEA) software ANSYS(TM). A single hyperelastic model (wit
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Ritter, Baird S. "Solution strategies for second order, nonlinear, one dimensional, two point boundary value problems by FEM analysis." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA246063.

Texto completo da fonte
Resumo:
Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, December 1990.<br>Thesis Advisor: Salinas, D. "December 1990." Description based on title screen as viewed on April 1, 2010. DTIC Identifier(s): Boundary value problems, finite element analysis, differential equations, problem solving, theses, interpolation, iterations, one dimensional, computer programs, approximation/mathematics, linearity. Author(s) subject terms: Galerkin FEM, nonlinear, quasilinearization, linearization, interpolation, iteration, differential equation, convergence. Includes bibliographical references (p.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Joglekar, Pramod N. "Three-dimensional finite element modeling of steady state seepage using the computer program 'SEEPS3D'." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06102009-063119/.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Ostendorp, Markus. "Improved Methodology for Limit States Finite Element Analysis of Lattice Type Structures using Nonlinear Post-Buckling Member Performance." PDXScholar, 1992. https://pdxscholar.library.pdx.edu/open_access_etds/1179.

Texto completo da fonte
Resumo:
In an attempt to achieve more efficient designs, the technological frontier is pushed further and further. Every year science probes for a better understanding of natural phenomena, discovering new and improved methods to perform the same task more efficiently and with better results. One of the new technologies is the nonlinear analysis of structural systems using inelastic post-buckling member performance. Inelastic post-buckling member performance is defined as the constitutive relationship between axial load and displacement after the ultimate member capacity has been exceeded. A nonlinear
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Pester, Matthias. "Visualization Tools for 2D and 3D Finite Element Programs - User's Manual." Universitätsbibliothek Chemnitz, 2006. http://nbn-resolving.de/urn:nbn:de:swb:ch1-200600436.

Texto completo da fonte
Resumo:
This paper deals with the visualization of numerical results as a very convenient method to understand and evaluate a solution which has been calculated as a set of millions of numerical values. One of the central research fields of the Chemnitz SFB 393 is the analysis of parallel numerical algorithms for large systems of linear equations arising from differential equations (e.g. in solid and fluid mechanics). Solving large problems on massively parallel computers makes it more and more impossible to store numerical data from the distributed memory of the parallel computer to the di
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Chan, Andrew Hin-Cheong. "A unified finite element solution to static and dynamic problems of geomechanics." Thesis, Swansea University, 1988. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624605.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Guney, Murat Efe. "High-performance direct solution of finite element problems on multi-core processors." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/34662.

Texto completo da fonte
Resumo:
A direct solution procedure is proposed and developed which exploits the parallelism that exists in current symmetric multiprocessing (SMP) multi-core processors. Several algorithms are proposed and developed to improve the performance of the direct solution of FE problems. A high-performance sparse direct solver is developed which allows experimentation with the newly developed and existing algorithms. The performance of the algorithms is investigated using a large set of FE problems. Furthermore, operation count estimations are developed to further assess various algorithms. An out-of-core v
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Cook, William Digby. "Studies of reinforced concrete regions near discontinuities." Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=75457.

Texto completo da fonte
Resumo:
A non-linear finite element computer program capable of predicting the complete response of two-dimensional reinforced concrete members was developed. This tool which accounts for the stress strain characteristics of cracked concrete was used to predict the responses of a number of members containing discontinuities. These members included corbels, dapped end beams, beams with web holes, and deep beams. The results of tests performed by the author as well as tests performed by other researchers were compared with the non-linear predictions. In addition, simple strut and tie models suitable for
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Finite element method Computer programs"

1

Lawrence, Taylor Richard, Nithiarasu Perumal, and Zhu J. Z, eds. The finite element method. 6th ed. Oxford: Elsevier/Butterworth-Heinemann, 2005.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Smith, I. M. Programming the finite element method. 3rd ed. Chichester: John Wiley & Sons, 1998.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Smith, I. M. Programming the finite element method. Chichester, West Sussex, United Kingdom: John Wiley & Sons Inc., 2014.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

V, Griffiths D., ed. Programming the finite element method. 2nd ed. Chichester [West Sussex]: Wiley, 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Smith, I. M. Programming the finite element method. 2nd ed. Chichester: Wiley, 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Ross, C. T. F. Finite element programs for structural vibrations. London: Springer-Verlag, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Hyochoong, Bang, ed. The finite element method using MATLAB. Boca Raton: CRC Press, 1997.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hyochoong, Bang, ed. The finite element method using MATLAB. 2nd ed. Boca Raton, FL: CRC Press, 2000.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

An introduction to the finite element method using BASIC programs. 2nd ed. Bishopbriggs, Glasgow: Surrey University Press, 1990.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

McKim, Alan E. The development of thin and sandwich composite finite elements to be added to SAP86: A finite element analysis program for microcomputers. [Downsview, Ont.]: Dept. of Aerospace Science and Engineering, 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Finite element method Computer programs"

1

Eslami, M. Reza. "Computer Programs." In Finite Elements Methods in Mechanics, 363–70. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08037-6_17.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Ross, C. T. F. "The Finite Element Method." In Finite Element Programs for Structural Vibrations, 1–19. London: Springer London, 1991. http://dx.doi.org/10.1007/978-1-4471-1886-2_1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Meguid, S. A. "Fundamentals of the Finite Element Method." In Integrated Computer-Aided Design of Mechanical Systems, 84–125. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3409-2_4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Fitch, John, and Richard Hall. "Symbolic computation and the finite element method." In Lecture Notes in Computer Science, 95–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/3-540-51517-8_94.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Wang, Zhaozhong, Feihu Qi, and Fugen Zhou. "A Discontinuous Finite Element Method for Image Denoising." In Lecture Notes in Computer Science, 116–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11867586_11.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Kruch, S. "Meso-Macro Modelling Using the Finite Element Method." In Computer Simulation in Materials Science, 103–11. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1628-9_6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Santos, Felix C. G., Mardoqueu Vieira, and Maria Lencastre. "Workflow for Simulators Based on Finite Element Method." In Lecture Notes in Computer Science, 555–64. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/3-540-44862-4_59.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Yin, Hongwu, Buying Zhang, and Qiumei Liu. "Nonconforming Finite Element Method for Nonlinear Parabolic Equations." In Communications in Computer and Information Science, 491–98. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16339-5_65.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Vasilyeva, Maria, and Denis Stalnov. "A Generalized Multiscale Finite Element Method for Thermoelasticity Problems." In Lecture Notes in Computer Science, 713–20. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-57099-0_82.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Zakharov, Y. N., K. S. Ivanov, and I. E. Saltykov. "Finite-Element Method in Tasks of Loose Soil Erosion." In Communications in Computer and Information Science, 228–35. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12203-4_23.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Finite element method Computer programs"

1

Luczak, E. R., and Q. Letan. "GRAPE: Finite Element Analysis and Shareware." In ASME 1991 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/cie1991-0112.

Texto completo da fonte
Resumo:
Abstract Use of Finite Element Methods are becoming more prevalent as we move into the 1990’s. More engineers and engineering technologists than ever before are graduating from universities and colleges with knowledge and expertise in the method. A wide assortment of programs are now available that run on micro’s, mini’s, mainframes, and super computers with a broad spectrum of capabilities and costs. Enter the Shareware concept. Shareware does not mean free software. It does mean that software may be freely distributed to promote it’s use and therefore is available to the user at very low cos
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Xie, Ming. "Development and Application of a Nonlinear Finite Element Computer Program." In ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium collocated with the ASME 1995 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/cie1995-0754.

Texto completo da fonte
Resumo:
Abstract An elastic-plastic stress increment updating scheme, namely, an adaptive step-size control scheme of a second-order Runge-Kutta method, was proposed. In order to model the contact loading of a rigid cylinder on a short beam specimen in the study of three-point short beam shear tests of composite materials, a simple contact modeling scheme was also developed. A three-dimensional nonlinear finite element computer program, incorporating a plasticity model for fiber-reinforced composites, was developed in the present study. The stress increment updating scheme and the contact modeling alg
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Knight, Charles E. "Subregion Analysis by the SBSF Method in Commercial Finite Element Software." In ASME 1993 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/cie1993-0032.

Texto completo da fonte
Resumo:
Abstract It is difficult to analyze a large, complex structure in sufficient detail to obtain accurate results everywhere. One approach to this problem is simply to refine the whole structure model in the regions of interest which is obviously costly. Another approach is to identify a subregion of the structure and develop a separate refined model of the subregion. The most recent method for subregion analysis presented in the literature[1] is called the Specified Boundary Stiffness and Force (SBSF) method. While the method is relatively straight forward and efficient, none of the commercial c
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Simon, Vilmos V. "Computerized Finite Element Mesh Generation in Hypoid Gears." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/dac-3771.

Texto completo da fonte
Resumo:
Abstract A method has been developed for the automatic finite element discretization of the pinion and the gear of a Gleason type hypoid gear pair. The numbers and sizes of elements can by arbitrarily chosen in the main directions and in the different regions of the teeth in order to get a finer mesh where extreme values of stresses are expected or previously calculated. The method includes the identification of each element by its number, the definition of element topology, the calculation of the nodal coordinates, and the specification of the boundary conditions. The main part of the method
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Nagasawa, S., H. Sakuta, and M. Goto. "Development of Finite Element Analysis Support System Based on the Hybrid Knowledge Model." In ASME 1992 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/cie1992-0090.

Texto completo da fonte
Resumo:
Abstract This paper deals with conceptual orientation and system development of intelligent support system for general purpose FEA (finite element analysis) programs. An integrated support system called “InhierTalk” (Integrated interactive environment for hierarchical representation for FEA) has been developed in Smalltalk, an object oriented language, in order to confirm effectivity of hierarchical representation and to establish an optimum method of the system development. Two object-oriented knowledge models which consist of macro visual data representation and micro regularized data repres
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Sarwar, M. K., A. A. Shabana, and Toshikazu Nakanishi. "A Design Methodology for Tracked Vehicles Using Experimentally Identified Modal Parameters and the Finite Element Method." In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0161.

Texto completo da fonte
Resumo:
Abstract The objective of this study is to develop a design procedure that integrates multibody techniques, the finite element method, and experimental modal analysis techniques. Multibody techniques and the finite element method are first used to develop and numerically test the performance of the proposed design. Based on this computer analysis, a prototype model can be built. The vibration modal parameters of this model can be determined experimentally and used with general purpose multibody computer programs to evaluate the performance of the design. The obtained numerical results can be c
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Xu, Jim, Carl Costantino, Charles Hofmayer, and Herman Graves. "Finite Element Models for Computing Seismic Induced Soil Pressures on Deeply Embedded NPP Structures." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93724.

Texto completo da fonte
Resumo:
This paper discusses computations of seismic induced soil pressures using finite element (FE) models for deeply embedded and/or buried (DEB) stiff structures, such as those appearing in the conceptual designs of structures for advanced reactors. For DEB structures, the soil-structure interaction (SSI) effect is expected to have a strong influence on the estimate of the seismic induced soil pressures, especially for stiff structures embedded in soft soil strata. In this paper, two FE models are developed using the SASSI and LS-DYNA computer programs, representing respectively the substructure s
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Shigang, Wang, Yu Jun, Zhou Ji, and Li Mingzhang. "3-D Elasto-Plastic Contact Finite Element Analysis for Bearings Design." In ASME 1990 Design Technical Conferences. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/detc1990-0099.

Texto completo da fonte
Resumo:
Abstract In this paper, A 3-D elasto-plastic contact problem in bearings is studied by Finite Element Method (FEM). A computer program has been developed for this purpose. A trial-error method is employed to cope with the geometrical nonlinearity and a tangential stiffness method is employed to tackle the material nonlinearity appeared in elasto-plastic contact problems. A frictionless contact problem of roller bearings is analysed, the result reveals that in 3-D elasto-plastic state the trend of the contact surface pressure distribution is similar to Hertz problem’s but flater.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Wang, Yikun. "Study on Precise Calculation of Three-Dimensional Fracture of Alloy Using Computer MA TLAB Program and Finite Element Method." In 2021 IEEE International Conference on Emergency Science and Information Technology (ICESIT). IEEE, 2021. http://dx.doi.org/10.1109/icesit53460.2021.9696957.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Guha, Amitava, and Jeffrey Falzarano. "Development of a Computer Program for Three Dimensional Analysis of Zero Speed First Order Wave Body Interaction in Frequency Domain." In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-11601.

Texto completo da fonte
Resumo:
Evaluation of motion characteristics of ships and offshore structures at the early stage of design as well as during operation at the site is very important. Strip theory based programs and 3D panel method based programs are the most popular tools used in industry for vessel motion analysis. These programs use different variations of the Green’s function or Rankine sources to formulate the boundary element problem which solves the water wave radiation and diffraction problem in the frequency domain or the time domain. This study presents the development of a 3D frequency domain Green’s functio
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Finite element method Computer programs"

1

Biffle, J. H. JAC3D -- A three-dimensional finite element computer program for the nonlinear quasi-static response of solids with the conjugate gradient method; Yucca Mountain Site Characterization Project. Office of Scientific and Technical Information (OSTI), February 1993. http://dx.doi.org/10.2172/138710.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Biffle, J. H., and M. L. Blanford. JAC2D: A two-dimensional finite element computer program for the nonlinear quasi-static response of solids with the conjugate gradient method; Yucca Mountain Site Characterization Project. Office of Scientific and Technical Information (OSTI), May 1994. http://dx.doi.org/10.2172/145293.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Cook, W. A. Generalized finite strains, generalized stresses, and a hybrid variational principle for finite-element computer programs using curvilinear coordinates. Office of Scientific and Technical Information (OSTI), April 1989. http://dx.doi.org/10.2172/6288515.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Ramakrishnan, Aravind, Ashraf Alrajhi, Egemen Okte, Hasan Ozer, and Imad Al-Qadi. Truck-Platooning Impacts on Flexible Pavements: Experimental and Mechanistic Approaches. Illinois Center for Transportation, November 2021. http://dx.doi.org/10.36501/0197-9191/21-038.

Texto completo da fonte
Resumo:
Truck platoons are expected to improve safety and reduce fuel consumption. However, their use is projected to accelerate pavement damage due to channelized-load application (lack of wander) and potentially reduced duration between truck-loading applications (reduced rest period). The effect of wander on pavement damage is well documented, while relatively few studies are available on the effect of rest period on pavement permanent deformation. Therefore, the main objective of this study was to quantify the impact of rest period theoretically, using a numerical method, and experimentally, using
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Finite element method Computer programs":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia