Bibliografias temáticas / Flux coil

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Flux coil"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 4 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Flux coil".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Flux coil"

1

Herceg, Dejana, Anamarija Juhas, and Miodrag Milutinov. "A design of a four square coil system for a biomagnetic experiment." Facta universitatis - series: Electronics and Energetics 22, no. 3 (2009): 285–92. http://dx.doi.org/10.2298/fuee0903285h.

Texto completo da fonte
Resumo:
In this paper, a square coil system similar to the Merritt four coil system is investigated. This system is used for a biomagnetic experiment at the laboratory at the Department of Biology, Faculty of Sciences, University of Novi Sad. For the experiment, it is necessary that the magnetic field inside the coils be uniform. Therefore, distribution of the magnetic flux density inside the coil system is considered. For this system, magnetic flux density produced by sinusoidal current through the coils is calculated and then uniformity of the magnetic field inside the coils is investigated. Calcula
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Hwang, Young Jin, Jae Young Jang, and SangGap Lee. "A Flux-Controllable NI HTS Flux-Switching Machine for Electric Vehicle Applications." Applied Sciences 10, no. 5 (2020): 1564. http://dx.doi.org/10.3390/app10051564.

Texto completo da fonte
Resumo:
This paper deals with a flux-controllable NI HTS flux-switching machine (FSM) for electric vehicle (EV) applications. In a variable-speed rotating machine for EVs, such as electric buses, electric aircraft and electric ships, an electric motor capable of regulating the flux offers the advantage of constant output operation. In general, conventional HTS rotating machines have excellent flux-regulation performance, because they excite an HTS field coil. However, it is difficult to ensure any flux-regulation capabilities in HTS rotating machines using HTS field coils that apply the no-insulation
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Olukotun, Babatunde, Julius Partridge, and Richard Bucknall. "Finite Element Modeling and Analysis of High Power, Low-loss Flux-Pipe Resonant Coils for Static Bidirectional Wireless Power Transfer." Energies 12, no. 18 (2019): 3534. http://dx.doi.org/10.3390/en12183534.

Texto completo da fonte
Resumo:
This paper presents the optimal modeling and finite element analysis of strong-coupled, high-power and low-loss flux-pipe resonant coils for bidirectional wireless power transfer (WPT), applicable to electric vehicles (EVs) using series-series compensation topology. The initial design involves the modeling of strong-coupled flux-pipe coils with a fixed number of wire-turns. The ohmic and core loss reduction for the optimized coil model was implemented by creating two separate coils that are electrically parallel but magnetically coupled in order to achieve maximum flux linkage between the seco
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

YAMAMOTO, Tatsuya, Yinggang BU, and Tsutomu MIZUNO. "Leakage Flux Recovery Coil for Energy Harvesting Using Magnetoplated Wire." Journal of the Japan Society of Applied Electromagnetics and Mechanics 23, no. 3 (2015): 486–91. http://dx.doi.org/10.14243/jsaem.23.486.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Romlie, Mohd Fakhizan, Kevin Lau, Mohd Zaifulrizal Zainol, Mohd Faris Abdullah, and Ramani Kannan. "Performance of Inductive Coupled Power Transfer Versus the Coil Shape - Investigation using Finite Element Analysis." MATEC Web of Conferences 225 (2018): 01017. http://dx.doi.org/10.1051/matecconf/201822501017.

Texto completo da fonte
Resumo:
The objective of this paper is to investigate the impact of the spiral coil shape of inductive coupled power transfer on its performance. The coil shapes evaluated are: circular, square and pentagon spiral shapes. The coils are modelled in Ansoft Maxwell software. Simulations are carried out to determine the mutual inductance, coupling coefficient and magnetic flux density. The performance in term of magnetic flux density, mutual inductance and coupling coefficient of the three coils shapes are compared. Of the three shapes, the pentagon is shown to have the best performance in term of its mut
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Isa, Wan Hasbullah Mohd, and Ismayuzri Ishak. "Analysis on the Optimal Geometrical Parameters of Topology Power Optimized Coil Based on a Cylindrical Magnet for Vibration-Based Electromagnetic Energy Harvester." Advanced Materials Research 903 (February 2014): 332–37. http://dx.doi.org/10.4028/www.scientific.net/amr.903.332.

Texto completo da fonte
Resumo:
This paper presents the analysis on geometrical parameters of the power-optimized coil based on Faradays principle by maximizing the coverage of magnetic flux linkage by the coil using a cylindrical permanent magnet of 6 mm diameter and 6 mm height. Faradays law states that induced voltage is the rate of change of flux linkage, meaning more winding induces more voltage. However it will increase also the resistance of the coil because the length of copper wire will also increase, which will reduce the generated power and power-density by the harvester according to Joules and Ohms laws. Simulati
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Iswahyudi, Sigit, and Wandi Arnandi. "Thrust Force of Three Circular Windings of Conductor in Magnetic Field." Applied Mechanics and Materials 836 (June 2016): 20–25. http://dx.doi.org/10.4028/www.scientific.net/amm.836.20.

Texto completo da fonte
Resumo:
An initial study of manipulated electric motor design to produce one axis thrust force without rotation was conducted. A cylindrical electromagnetic propulsion system has a diameter of 75 mm and a height of 90 mm made of ST 60 steel was tested. The system has a coil as conductor carrying current to produce thrust force and a coil to produce magnetic flux in its inner part. There were three windings of coils producing forces have effective diameter of 32 mm that were varied in their loops distance. The coil producing magnetic flux has 148 windings of 1 mm isolated cable on ferrite core. The thr
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hwang, Young Jin, and Jong Myung Kim. "A Double Helix Flux Pipe-Based Inductive Link for Wireless Charging of Electric Vehicles." World Electric Vehicle Journal 11, no. 2 (2020): 33. http://dx.doi.org/10.3390/wevj11020033.

Texto completo da fonte
Resumo:
This paper presents a novel inductive link for wireless power transfer (WPT) system of electric vehicles (EVs). The WPT technology uses an alternating magnetic field to transfer electric power through space. The use of the WPT technology for charging electric vehicle provides an excellent alternative to the existing plug-in charging technology. It has been reported that the inductive link using planar coils such as the circular and rectangular coil are capable of transferring a high power with high efficiency. However, they have a poor tolerance for lateral misalignment, thus their power trans
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Kikuchihara, Hiroki, Illiana Marinova, Yoshifuru Saito, Manabu Ohuchi, Hideo Mogi, and Yoshiro Oikawa. "Development of a New High Sensitive Eddy Current Sensor." Materials Science Forum 792 (August 2014): 98–103. http://dx.doi.org/10.4028/www.scientific.net/msf.792.98.

Texto completo da fonte
Resumo:
Eddy current testing (ECT) is one of the most representative nondestructive testing methods for metallic materials, parts, structures and so on. Operating principle of ECT is based on two major properties of the magnetic field. One is that alternating magnetic field induces eddy current in conducting materials. Thereby, an input impedance of the magnetic field source, i.e., electric source, depends on the eddy current path. Second is that the magnetic field distribution depends not only on the exciting but also on the reactive magnetic fields caused by the eddy currents in targets. Former and
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Cividjian, G. A., A. Dolan, and N. Pãduraru. "Inductance of cylindrical coil." Serbian Journal of Electrical Engineering 1, no. 2 (2004): 143–51. http://dx.doi.org/10.2298/sjee0402143c.

Texto completo da fonte
Resumo:
The cylindrical coreless and bar core coils are used in instrument transformers and many other electromagnetic devices. In the paper, using the separation of variables an analytical formula for the leakage inductance of thin cylindrical coil with unsaturated core is deduced, assuming a simplified path for the frontal flux. The results are compared with well-known experimental data and data resulting from FEM models.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Flux coil"

1

Lomheim, Sigbjørn. "Analysis of a Novel Coil Design for Axial Flux Machines." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23649.

Texto completo da fonte
Resumo:
A novel coil design for permanent magnet axial flux machines is presented. An analysis of its performance regarding winding layout, cooling capability, cogging torque, and back-EMF is conducted. Different manufacturing and assembly methods are described. A prototype stator has been built and tested. The prototype stator has a 90% fill factor, and is an iron free wave-winded topology. The prototype has been analyzed using analytical approaches, and compared to the performance in the laboratory testing. An analysis of introducing iron in the stator has been done, where the effect of iron stator
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Bourgeois, Jacob. "Modeling effects of adding a flux channel to a planar magnet-coil actuator." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/32875.

Texto completo da fonte
Resumo:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.<br>Includes bibliographical references (p. 38).<br>Planar magnet-coil actuators are used in many different MEMS devices. This report describes one way to improve the actuator range per current input of planar coil actuators. This is accomplished by adding a flux channel around and beneath the actuator's magnet. The Lorentz force is created by putting a current carrying planar coil over a magnet in an actuator assembly. The Lorentz force depends on the current vector and the magnetic field vector. In th
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Kokko, V. (Voitto). "Condition monitoring of squirrel-cage motors by axial magnetic flux measurements." Doctoral thesis, University of Oulu, 2003. http://urn.fi/urn:isbn:9514269381.

Texto completo da fonte
Resumo:
Abstract The aim of this research work is to develop a tool for condition monitoring of squirrel-cage motors using axial magnetic flux measurements, and to design a diagnostics system for electrical motors. The basic theory of the measurements and systems was found through literature reviews and was further developed from the experimental results of this research work. Fluxgate magnetometers and Hall effect sensors are not reliable enough for condition monitoring purposes, but measurements by flux coil sensors can reach adequate reliability. The useful frequency area of the flux coil sensor i
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Rankin, Douglas Findlay. "Investigations into pulsed ultra-high magnetic field single-turn coil systems and θ-pinch electromagnetically-driven flux compression devices". Thesis, Loughborough University, 2006. https://dspace.lboro.ac.uk/2134/34727.

Texto completo da fonte
Resumo:
Magnetic flux densities exceeding 100 T are termed 'ultrahigh' magnetic flux densities and are necessarily developed using pulsed energies. Two particular laboratory techniques are commonly used to produce magnetic fields of this size; the single turn coil (STC) technique and the electromagnetically driven flux compression (EMFC) technique. Over recent years there has been a strong drive to improve both of these systems and to develop them further. This has primarily been achieved by analytical simulation as well as by innovative design solutions. This thesis investigates both techniques, and
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Oscarsson, Mattias. "Modelling and design approaches of magnetostrictive actuators." Licentiate thesis, Stockholm : Kungliga Tekniska högskolan, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4435.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Keysan, Ozan. "A Non-invasive Speed And Position Sensor For Induction Machines Using External Search Coils." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12610290/index.pdf.

Texto completo da fonte
Resumo:
In industrial drives market, speed and position estimation are one of the most important subjects for accurate motor drives. Vector controlled drives has the best dynamic performance among AC motor drives. Sensorless vector control is one of the most studied one. However, sensorless drive systems fail at low or zero speeds and may not have enough accuracy. For better accuracy and speed range speed sensors or position encoders are usually essential. However, coupling of sensor and sensor prices introduces extra cost on the drive. Thus in order to reduce the cost of the drive a cheap and easy to
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Thelin, Peter. "Design and Evaluation of a Compact 15 kW PM Integral Motor." Doctoral thesis, KTH, Electrical Systems, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3322.

Texto completo da fonte
Resumo:
<p>This thesis deals with the integral motor of tomorrow, and particularly with a variable speed, sensorless permanent magnet synchronous motor with an integrated converter. The rated power is 15 kW at 1500 r/min. The outer dimensions are approximately the same as for the equivalent standard induction motor.</p><p>Control strategies for pumps and fans, i.e. suitable loads for variable speed motors, are briefly described. The huge energy savings that can be made by reducing the speed instead of throttling/choking the flow are pointed out. Compared to installing an induction motor with a separat
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Geier, Martin. "Influência dos parâmetros envolvidos no processo de união por interferência de tubos por cravamento eletromagnético." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/96295.

Texto completo da fonte
Resumo:
A união por conformação eletromagnética de perfis tubulares de alta condutividade elétrica é um processo inovador e limpo que pode substituir com sucesso os processos convencionais de união baseados na fixação mecânica por parafusos, rebites, soldagem e adesivos estruturais. Esta tecnologia funciona a temperatura ambiente, permite a união de materiais diferentes e oferece potencial para promover novas aplicações na montagem de estruturas leves. Neste trabalho busca-se compreender a união por interferência de tubos por cravamento eletromagnético em termos de seus principais parâmetros com o obj
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Le, Van Vinh. "Développement de formulations intégrales de volume en magnétostatique." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAT132/document.

Texto completo da fonte
Resumo:
Ces dernières années, la Méthode Intégrale de Volume (MIV) a reçu une attention particulière pour lamodélisation des problèmes électromagnétiques en basse fréquence. Son intérêt principal est l’absencedu maillage de la région air, ce qui rend la méthode légère et rapide. Associée aux méthodes decompression matricielle la MIV devient aujourd'hui une alternative compétitive à la méthode deséléments finis pour la modélisation de dispositifs électromagnétiques ayant un volume d'airprépondérant.Ce rapport porte sur le développement de deux formulations intégrales de volume pour la résolution deprob
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Garg, Dhiraj Kumar. "Numerical modeling and simulation of polymerization reactions in coiled flow inverters." Thesis, Strasbourg, 2014. http://www.theses.fr/2014STRAE002/document.

Texto completo da fonte
Resumo:
L’objectif de ce travail fut d’améliorer la modélisation et la simulation de la polymérisation radicalaire dans des réacteurs continus et discontinus. Une solution analytique explicite généralisée (AS) fut obtenue dans le cas de la polymérisation en masse/solution, homogène et isotherme menée dans un réacteur fermé de volume variable. Les différentes étapes considérées furent l'initiation, la propagation, le transfert au monomère, au solvant, à un agent de transfert de chaîne, la terminaison par combinaison et dismutation. Différents modèles rendant compte des effets de gel, de vitrification e
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Flux coil"

1

Wu, Jiang, Yan Cao, Weiguo Pan, and Weiping Pan. Coal Fired Flue Gas Mercury Emission Controls. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46347-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Dacey, P. W. Flue gas desulphurisation: System performance. IEA Coal Research, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Santhanam, Chakra J. An evaluation of the disposal of flue gas desulfurization wastes in coal mines and the ocean: Mine disposal demonstration tests. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1985.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Abtahi, A. Heat flux sensor research & development: The cool film calorimeter : final report 25-January, corrected 30 June 1990. Lockheed Aeronautical Systems Company, 1990.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

International, Technical Conference on Coal Utilization &. Fuel Systems (21st 1996 Clearwater Fla ). Proceedings of the 21st International Technical Conference on Coal Utilization & Fuel Systems : March 18-21, 1996, Clearwater, Florida, U.S.A. The Association, 1996.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

International Technical Conference on Coal Utilization & Fuel Systems (22nd 1997 Clearwater, Fla.). Proceedings of the 22nd International Technical Conference on Coal Utilization & Fuel Systems : March 16-19, 1997, Clearwater, Florida, U.S.A. The Association, 1997.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Taniguchi, Masayuki. Oxy-fuel combustion: The NOx and coal ignition reactions. Nova Science Publishers, 2009.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Haefner, Ralph J. Water quality at an abandoned Ohio coal mine reclaimed with dry flue-gas desulfurization byproducts. U.S. Dept. of the Interior, U.S. Geological Survey, 1997.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Carbon dioxide removal from coal-fired power plants. Kluwer Academic Publishers, 1994.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Golomb, A. Limestone scrubber FGD wastewaters/leachates: A literature review. Canadian Electrical Association, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Flux coil"

1

Kugai, Hirokazu, Tatsuoki Nagaishi, and Hideo Itozaki. "YBCO Thin film Flux Transformer with Multiturn Input Coil." In Advances in Superconductivity VIII. Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-66871-8_258.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Uchii, Toshiyuki, Yasunobu Yokomizu, and Toshiro Matsumura. "High T c Superconducting Fault Current Limiter with Flux-Lock Reactors and Ac Magnetic Field Coil." In Advances in Superconductivity IX. Springer Japan, 1997. http://dx.doi.org/10.1007/978-4-431-68473-2_167.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Matsuoka, Yu, and Kazuyuki Shimizu. "Metabolic Flux Analysis for Escherichia coli by Flux Balance Analysis." In Methods in Molecular Biology. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1170-7_15.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Punshon, T., A. S. Knox, D. C. Adriano, J. C. Seaman, and J. T. Weber. "Flue Gas Desulfurization (FGD) Residue." In Biogeochemistry of Trace Elements in Coal and Coal Combustion Byproducts. Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-4155-4_2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Matsuoka, Yu, and Kazuyuki Shimizu. "13C-Metabolic Flux Analysis for Escherichia coli." In Methods in Molecular Biology. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1170-7_16.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Schrijver, C. J., and J. Coté. "The relation between the CA II K line-core flux density and the magnetic flux density on the sun." In Cool Stars, Stellar Systems, and the Sun. Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/3-540-18653-0_106.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Zhang, Dalong, Hang Shi, Chenwei Meng, et al. "Measurements on Heat Flux Distribution in a Supercritical Arch-Fired Boiler." In Clean Coal Technology and Sustainable Development. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-2023-0_27.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Wu, Jiang, Yan Cao, Weiguo Pan, and Weiping Pan. "Coal-Fired-Derived Flue Gas Mercury Measurement." In Energy and Environment Research in China. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46347-5_3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Wu, Jiang, Yan Cao, Weiguo Pan, and Weiping Pan. "Coal-Fired Flue-Gas Mercury Control Technologies." In Energy and Environment Research in China. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46347-5_5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ishak, C. F., J. C. Seaman, M. E. Sumner, and W. P. Miller. "Contaminant Mobility in Soil Columns Amended with Fly Ash and Flue Gas Desulfurization Gypsum." In Biogeochemistry of Trace Elements in Coal and Coal Combustion Byproducts. Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-4155-4_15.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Flux coil"

1

Slepchenkov, M., M. Morehouse, V. Kiyashko, et al. "Limiter-Coil Current Controller for Flux-Coil Generated FRC." In 2011 IEEE 24th Symposium on Fusion Engineering (SOFE). IEEE, 2011. http://dx.doi.org/10.1109/sofe.2011.6052327.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Kobayashi, Noriyasu, Souichi Ueno, Satoshi Nagai, Makoto Ochiai, and Noboru Jimbo. "Remote Field Eddy Current Testing for SG Inspection of Fast Reactor." In 18th International Conference on Nuclear Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/icone18-29578.

Texto completo da fonte
Resumo:
We confirmed defect detection performance of a remote field eddy current testing (RFECT) in order to inspect a helical-coil-type double wall tube steam generator (DWTSG) with a wire mesh layer for the new-type small fast reactor 4S (Supersafe, Small and Simple). As high sensitivity techniques, to increase an indirect magnetic field intensity, we focused attention on increasing a direct magnetic field intensity in the vicinity of an exciter coil by the use of an exciter coil with a magnetic material (flux guide). We adopted horizontal type multiple detector coils with flux guides arrayed circum
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Kupec, J., H. Ahlers, J. Belliss, et al. "Intercomparison of Magnetic Flux by Means of Coil Transfer Standard." In 2004 Conference on Precision Electromagnetic Measurements. IEEE, 2004. http://dx.doi.org/10.1109/cpem.2004.305563.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Punjala, Shishir. "Coil designs that enable wireless powering by cancelling flux leakage." In 2017 International Applied Computational Electromagnetics Society Symposium - Italy (ACES). IEEE, 2017. http://dx.doi.org/10.23919/ropaces.2017.7916364.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Olukotun, Babatunde, J. S. Partridge, and Richard W. G. Bucknall. "Impact of Coil Turns on Losses, Output power and Efficiency Performance of Flux-Pipe Resonant Coils." In 2019 IEEE PES Innovative Smart Grid Technologies Europe (ISGT-Europe). IEEE, 2019. http://dx.doi.org/10.1109/isgteurope.2019.8905677.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Jiang, Wen, Wenxin Huang, Xiaogang Lin, Dingfeng Dong, and Yong Zhao. "An Improved 24/14 Poles Stator Wound-Field Flux-Switching DC Generator Based on Virtual Coil Flux Linkages." In 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE). IEEE, 2019. http://dx.doi.org/10.1109/isie.2019.8781453.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Mallary, M. L., and S. Ramaswamy. "A New Thin Film Head Which Doubles The Flux Through The Coil." In 1993 Digests of International Magnetics Conference. IEEE, 1993. http://dx.doi.org/10.1109/intmag.1993.642741.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Zhang, Zhaoqiang, Jon Eirik Brennvall, and Robert Nilssen. "Torque ripple reduction in an axial-flux jigsaw-coil permanent magnet machine." In 2014 17th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2014. http://dx.doi.org/10.1109/icems.2014.7014116.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Hasirci, Ugur. "Nonlinear control of axial flux flywheel motor/generator set of coil launchers." In 2014 17th International Symposium on Electromagnetic Launch Technology (EML). IEEE, 2014. http://dx.doi.org/10.1109/eml.2014.6920648.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Alotto, P., A. Spagnolo, and B. Paya. "Particle swarm optimization of a multi-coil transverse flux induction heating system." In 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2010). IEEE, 2010. http://dx.doi.org/10.1109/cefc.2010.5481847.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Flux coil"

1

O`Connor, T. BaBar technical design report: Chapter 9, Magnet coil and flux return. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/495658.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

He, J. L., T. M. Mulcahey, D. M. Rote, and T. Kelly. Computer modeling and experimental verification of figure-eight-shaped null-flux coil suspension system. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10120388.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Tominaka, T. Expressions For The Magnetic Flux Enclosed By Rotating Coils In Helical Dipoles. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/1149845.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Bruce C. Folkedahl, Greg F. Weber, and Michael E. Collings. Water Extraction from Coal-Fired Power Plant Flue Gas. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/927112.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Rue, David. Next Generation Pressurized Oxy-Coal Combustion: High Efficiency and No Flue Gas Recirculation. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1165572.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Eric P. Robertson. Analysis of CO2 Separation from Flue Gas, Pipeline Transportation, and Sequestration in Coal. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/935461.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Morris D. Argyle. Supported, Alkali-Promoted Cobalt Oxide Catalysts for NOx Removal from Coal Combustion Flue Gases. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/913563.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Radisav Vidic, Joseph Flora, and Eric Borguet. Mercury Speciation in Coal-Fired Power Plant Flue Gas-Experimental Studies and Model Development. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/1004940.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Merkel, Tim, Xiaotong Wei, Bilgen Firat, et al. Membrane Process to Capture CO{sub 2} from Coal-Fired Power Plant Flue Gas. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1089151.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Radisav Vidic, Joseph Flora, and Borguet. Mercury Speciation in Coal-Fired Power Plant Flue Gas Experimental Studies and Model Development. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/1004874.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Flux coil":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia