Bibliografias temáticas / Krokový motor / Teses / dissertações
Siga este link para ver outros tipos de publicações sobre o tema: Krokový motor.

Teses / dissertações sobre o tema "Krokový motor"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 16 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "Krokový motor".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.

1

Hořák, Jan. "Řízení krokových motorů se zpětnou vazbou". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221247.

Texto completo da fonte
Resumo:
The theme of this thesis is the design and optimization of algorithms for controlling stepper motors with feedback by measuring the BEMF. The emphasis was on self-management stepper motor current depending on the load. To verify the algorithm was designed and built sample devices with integrated circuit NCV70514 from ON Semiconductor. The result is a sample device, the control program and algorithm to control a stepper motor.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Hanulík, René. "Řízení CNC pískovačky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413120.

Texto completo da fonte
Resumo:
The diploma thesis clarifies the issue of creating inscriptions on stone slabs. It describes some types of sensors, actuators, their physical principles and possibilities of their use. The work mentions the limitations and specifics of sandblasting, design solutions and implementation of equipment for patternless sandblasting.The functionality of the device is demonstrated and verified on illustrative examples.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Bělíček, David. "Řízení krokového motoru mikrokontrolérem". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218073.

Texto completo da fonte
Resumo:
Subject of this thesis is introduction to questions of stepping motors control. The thesis characterizes basic principles some types of stepping motor, their features and control methods. These knowledges are consequently used for proposition of controlling circuit for driving stepping motor using microcontroller.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Streit, Jakub. "Jednotka pro řízení motorů dávkovacích čerpadel". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240949.

Texto completo da fonte
Resumo:
The goal of this thesis is design of universal system for motor control. This device must be able to control at least 4 motors, stepper motors or DC motors. Wired, or wireless communication, using IEEE 802.15.4, is mandatory. The System is based on modular concept. The Basic modules are Control module, Communication module, Connection module and Power module. The system was tested in the control of fertilizer dosing pumps in the greenhouse
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Smrž, Ondřej. "Pohon peristaltického čerpadla pro lékařské účely". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219377.

Texto completo da fonte
Resumo:
This work is focused on the design of the peristaltic pump drive for medical purposes. Its initial goal is closer introduction of peristaltic pumps and stepper motors. Then the design of BLDC motor will be made and the use of this motor will be compared with stepper motor. Design of the BLDC motor will be made using RMxprt. Last but not least simulations of both types of motors for the peristaltic pump will be created in Simplorer. Finally, the program LabVIEW will be introduced and a program for controlling a stepper motor will be created.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Tmej, Tomáš. "Elektronika a řízení CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417753.

Texto completo da fonte
Resumo:
The diploma thesis focuses on the electronics design of a hobby CNC milling machine. There are analysed and described the individual electronic parts and components related to this problematic. Three electronics suggestions are made, these suggestions are compared. Then, one of these variants is selected and implemented. Next, is created a relevant PLC program to control the CNC milling machine with visualization for easy control.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Ondrák, Tomáš. "Mikročerpadlo pro účely medikamentózní terapie". Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-233522.

Texto completo da fonte
Resumo:
This doctoral thesis originated as a requirement of micropump for artificial heart with using a suitable type of electric drive. It is an interdisciplinary cooperation of FSI Brno, Department of Fluid Engineering of Viktor Kaplan, FEKT Brno, Department of Power Electronics and finally the doctors from Cardiology Medical Center in St. Ann’s Hospital. FSI Brno made mechanical solutions of micropump, FEKT Brno solved electric drive and Cardiologic Medical Center gave the knowledge of human anatomy. Work deals with design, creation and testing of various types micropumps for medicamentous using. In this thesis was suggested various solutions of electric drive for micropump, its structure and function. Work is primarily experimental in nature and is heavily supported by a creative approach in creating a variety of proposed solutions. Several proposals of micropump have been made with different types of electric drives (DC motors, hybrid stepper motor, piezomotors). Finally, from the technical and economical point of view was chosen the most suitable type of electric drive and it was created a functional prototype of the double-action pump and its properties were tested.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hýbl, Matouš. "Dvoukanálový kontrolér krokových motorů". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442448.

Texto completo da fonte
Resumo:
Cílem této práce je vývoj dvoukanálového kontroléru krokových motorů. V rámci práce je popsán jak vývoj elektroniky, tak vývoj příslušného software. Elektronika kontrolŕu je založena na mikrokontroléru STM32F405 a driverů krokových motorů vyráběných firmou Trinamic. Pro komunikaci s nadřazenými systémy je implementován protokol CANOpen a sběrnice I\textsuperscript{2}C a USB. Elektronika byla navržena v software KiCAD and využívá čtyřvrstvého plošného spoje a moderních výrobních technologií. Co se týká software, byl vyvinut jak firmware pro mikrokontrolér, tak software pro ovládání kontroléru. Obě části software využívají programovacího jazyka Rust, který se zaměřuje na bezpečnost práce s pamětí, rychlost a zero-cost abstrakce. Sekundárním cílem této práce je ukázat, jak lze tento programovací jazyk s výhodou použít pro programování nízkoúrovňového embedded software. Firmware kontroléru implementuje nezávislé řízení pohybu obou os kontroléru a to jak v rychlostním, tak v pozičním režimu a zároveň implementuje bezpečnostní funkce pro případy selhání komunikace. Výsledný kontrolér by měl být použit v rámcí výzkumné skupiny Robotiky a Umělé Inteligence a studenty na Ústavu Automatizace FEKT VUT.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Raszka, Dan. "Modul řízení krokového motoru pro poziční systém přes Ethernet". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377014.

Texto completo da fonte
Resumo:
This paper describes the design of Stepper motor controller module controlled over Ethernet for positioning system. Part of this work describes analysis of the assignment, design of modular circuit, choosing right components and prototype design of communication and power module. In another part each module is described with emphasis to modularity. It deals with description of manufactured prototypes and their tested paramethers.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Dostál, Jan. "Konstrukce vidlicové azimutální montáže astronomického dalekohledu". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229145.

Texto completo da fonte
Resumo:
Purpose of this master´s thesis is the construction proposal of azimuth fork mount with load capacity to 20kg including both axes drives. The solution contains design options of azimuth fork mount, calculations, design proposal of the mount and drawings of the shaft, fork and the assembly.
Estilos ABNT, Harvard, Vancouver, APA, etc.
11

Matoušek, Vojtěch. "Návrh a řízení CNC stroje". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218945.

Texto completo da fonte
Resumo:
My task was to build a smaller structure triaxial CNC milling. I designed electronics for motion control. The main part is the implementation of the control unit, which will provide control of the machine. The work includes the complete design, PCB design and program description for the uP ARM. The unit can work independently as well as hardware interpolator connected to the PC.
Estilos ABNT, Harvard, Vancouver, APA, etc.
12

Kamenec, Jan. "Automatizace procesu 3D zobrazování". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219526.

Texto completo da fonte
Resumo:
The task of my thesis was to automate the process of 3D stacking. The work includes design of complex control board, that will serve as a control unit and provide a comprehensive function of mechanical displacement in combination with digital image acquisition. In addition, the electronics for controlling a stepper motor, PCB and the design. The result of this is a facility that provides automatic acquisition of images with different depth of field.
Estilos ABNT, Harvard, Vancouver, APA, etc.
13

Zobač, Evžen. "Návrh motorizovaného optického systému pro zaostření laserového svazku". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401032.

Texto completo da fonte
Resumo:
This diploma thesis deals with the structural and optomechanical design of automatization of focusing laser beam for a remote laser spectroscopy device. The chosen solution uses an active rangefinder and a rotary unit to control the change of the focus plane of the device's optic system. The dependence of the focus plane’s change on the shift of lens in the focus plane was practically measured. For proper control of the rotary unit, this dependency is needed. Structural parts were made based on the created drawing documentation. The structural parts were mounted in the existing assembly of the device together with the purchased components. The proposed solution enables a change of the optical system, for example, in order to obtain a more appropriate range of focal planes.
Estilos ABNT, Harvard, Vancouver, APA, etc.
14

Karásek, Josef. "Elektronika pro vyšívací stroj". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221012.

Texto completo da fonte
Resumo:
The main components of the system for embroidery sewing machine is (Veritas 8014/35-2) and pointing devices. The machine automatically entered embroidered patterns, it is necessary to construct a pointing device and its control. To drive the pointing device used two stepper motors, the control circuit to cater to the ATmega128. Communication between PC and ATmega128 provides converter FT232.
Estilos ABNT, Harvard, Vancouver, APA, etc.
15

Kolář, David. "Konstrukční návrh portálové CNC frézky s posuvným stolem". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318840.

Texto completo da fonte
Resumo:
This master’s thesis is focused on design of gantry CNC milling machine with sliding table. Thesis includes the review of components of this machines and comparsion of their options. Servo motors , ball screws and linear guides parameters are calculated. Also the suitable software and hardware for the machine control is chosen. Main parts of the machine were analysed using finite elements method. 3D model, drawings and documentation of machine build are included.
Estilos ABNT, Harvard, Vancouver, APA, etc.
16

Ševčík, Martin. "Modelování a implementace řídicího algoritmu 3D tiskárny". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-403747.

Texto completo da fonte
Resumo:
The content of the thesis is the modeling and implementation of the CNC control algorithm. This master thesis contains the description of issues of computer-controlled machines, the research of interpolation algorithms for control CNC machines and the modeling of the selected control algorithm with motor S-curve shaped speed profiles and simulation of chosen algorithms with S-shaped speed profiles in Matlab & Simulink.
Estilos ABNT, Harvard, Vancouver, APA, etc.
17

Hložek, Vojtěch. "Realizace gravírovacího přístroje pro vykreslování grafiky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219229.

Texto completo da fonte
Resumo:
The objective of this master's thesis is to design and implement a system which would be able to transfer a picture (either a bitmap or a vector image) on a foundational material. The main part of the apparatus consists of a plotter controlled by two stepping motors. The engraving itself is provided by a marker mounted to a movable part of engraving head. There was a PCB created for controlling the entire system. It contains power supplies, a microcontroller and motor and engraving head controlling circuits. The second part of the thesis shows a microcontroller program and a user interface in a PC. The image is trasfered from the PC into the microcontroller where it is processed and, based on the controlling program, engraved to the material.
Estilos ABNT, Harvard, Vancouver, APA, etc.
18

Lipr, Tomáš. "Měření kvantové účinnosti optoelektronických prvků a návrh laboratorního měřícího systému". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219353.

Texto completo da fonte
Resumo:
This thesis deals with the issue of quantum efficiency measurement of optoelectronic devices. The physical nature of silicon solar cells is explained here. In addition, the quantum efficiency as a concept is introduced. There is also discussed the influence of a solar cell semiconductor structure on the quantum efficiency itself. Furthermore, the thesis is focused on the design of an experimental set-up for automated measurement and data acquisition. The final realization of the step motor control unit is described in detail. It includes local and/or remote operations, design and development motivation. The next chapter is dedicated to analysis of the Matlab source code for remote operation, data acquisition and presentation. The final part of the thesis gives attention to experiments with real structures, not only the solar cells. The obtained results of analyzed measurements are presented at the conclusion.
Estilos ABNT, Harvard, Vancouver, APA, etc.
19

Homola, Stanislav. "Počítačem řízená frézka". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231081.

Texto completo da fonte
Resumo:
This goal of the diploma thesis is to design, to construct and write control program for CNC milling machine designed for machining aluminum, wood and plastic. Entire structure of machine is designed and made of steel. The main table consists of an aluminum plate and aluminum structural profiles. Spindle of milling machine is a high speed motor from ATAS a.s. company. Milling machine is controlled by the program made in TwinCAT environment from Beckhoff Automation GmbH & Co. KG.
Estilos ABNT, Harvard, Vancouver, APA, etc.
20

Kotek, Lukáš. "Zubní 3D skener". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221389.

Texto completo da fonte
Resumo:
The general aim of my master´s thesis is to study the actual principles of 3D scanning, the anatomy of human teeth, use of 3D scanning in dentistry and other medical fields. Another part of this thesis is about software and hardware design of 3D scanning system, which enable us to scan dental casts. This design is using webcam, projector and turntable. The principle of scanning is based on the activ triangulation. The output of 3D scanner is a horde of spots, which are used for reconstruction of a surface. The reconstructed surface is finally saved as .stl format.
Estilos ABNT, Harvard, Vancouver, APA, etc.
21

Sýkora, Ota. "Návrh a realizace software pro řízení ablační cely". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254461.

Texto completo da fonte
Resumo:
The essence of this diploma thesis is the design and implementation of software for laser ablation control. The paper describes laser ablation, hardware specifications of device and application requirements. The second part provides description of design and implementation of the actual application in NI LabView.
Estilos ABNT, Harvard, Vancouver, APA, etc.
22

Půhoný, Jan. "Návrh speciálního anténního rotátoru". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218591.

Texto completo da fonte
Resumo:
This master's thesis deals with design electronics for an antenna rotator in two axis. There are designed and implemented drivers for two stepper motors. Was also designed and implemented control panel that allows manual control the rotator and remote control by PC via USB. At the same time created software for control panel and PC application for easy operation.
Estilos ABNT, Harvard, Vancouver, APA, etc.
23

Balogh, Jaroslav. "Návrh pozičního systému". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219224.

Texto completo da fonte
Resumo:
The purpose of this diploma thesis was to explore possibilities, design and build 2D position system driven by PC via USB. ATmega16 and FT232R were used as the most important parts of hardware solution. Software for control of the position system was designed in C++ Builder and it can run under MS Windows XP. This work is based on semestral thesis and in future can be used in other applications or modified. 2D position system will be later used by UBMI in education and scientific applications.
Estilos ABNT, Harvard, Vancouver, APA, etc.
24

Šikula, Radek. "Skenovací fotoeleasticimetrie". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220216.

Texto completo da fonte
Resumo:
This thesis deals with the polarization of the light and its use in the field of photoelasticity measurement. The theoretical part is divided into two sections. First the light is described as electromagnetic waves in the theoretical section. Further the polarization types are described and the principle of the photoelasticity is explained. Electronic is described in the second section of the theoretical part. In the frame of the experimental part electronic design is presented together with the program for the scanning device controller. The functionality of the device is tested in the last section.
Estilos ABNT, Harvard, Vancouver, APA, etc.
25

Ludva, Stanislav. "Návrh a výroba modulu pro řízení motorů na nízká napětí". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317187.

Texto completo da fonte
Resumo:
The aim of this diploma thesis is to design and implement a universal driver unit designed to control electric motors of small voltages – electronically commutated, DC and stepper. This involves creating topology and selecting appropriate components based on the required parameters. It also includes the manufacture of printed circuit board (PCB), soldering of the components and programming of the necessary functions. Thesis contains the analysis of three selected types of motors – the principle of operation, wiring and control. Testing of the control unit was performed at the end of the work.
Estilos ABNT, Harvard, Vancouver, APA, etc.
26

Lang, Stanislav. "Automatický tester HMI". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219324.

Texto completo da fonte
Resumo:
This thesis is dedicated to the automation of tests of the thermostats developed by the company Honeywell. The first chapter presents a problem of self-testing of thermostats, followed by a discussion of possible approaches to solutions. Attention is paid to testing the functionality of the HMI of thermostats, especially to the part of the system, that deals with activation of touchscteen, but no other part of the problem are omitted in the text. Discussions of the problematic passes into the design and implementation of specific design solutions. The selected design of 3D-router, which moves in three orthogonal coordinates and resembles to a coordinate drill for example. First, it describes the basic concepts of mechanic and electronic part of equipment, and subsequently is designed and implemented control electronics for mechanical activator HMI. Each of the electronics components are described in detail and values of parts are based on the calculation with the exception of finished parts. The proposal of the electronics follows the possibility of maximization of universality module for applications in similar applications. The functionality of the electronics is controlled by a microprocessor with a custom program that is described in the work. Source code of some the programs is not available because it is know-how of the company. Next part of the thesis deals with optimization of the moving of axes, optimization is done empirically by measuring. An important issue is compliance with the accuracy required position, also part of the work is devoted to the issue of calibration position. Finally is solved the continuity on the superior system. It is designed and implemented the upper layer of the communication protocol used in the company. Work is the solution of specific corporate award thesis. Although it is a very specific role of the works are generally applicable for other applications. In particular, the proposed electronic represents relatively universal controller for stepper motor control.
Estilos ABNT, Harvard, Vancouver, APA, etc.
27

Müller, Tomáš. "Digitální zapisovač dat". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219154.

Texto completo da fonte
Resumo:
This thesis deals with method of measuring optical beam intensity, searching for communication system beam using stepper motor movement of the optical head and processing measured signal for displaying on PC. The basic theory of optoelectronics is shown here concerning the problem. There is elaborated main principles of photodetector and stepper motor mainly, which are main part of device. The second part of work is theoretical design of data recorder. All parts are described individually-their characteristics and conditions for correct usage. In the last part setup of device is explained, with the references to blocks of written programs. In the last part, main funcrions of system, its hardware managing and communication are described. At the very end of thesis, examples of measured data are presented.
Estilos ABNT, Harvard, Vancouver, APA, etc.
28

Jaroš, Tomáš. "Vývoj automatického analyzátoru vzorků uhlíku a síry ACS 820". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-319631.

Texto completo da fonte
Resumo:
The thesis deals wiring design of automated analyzer ACS 820 for carbon and sulfur. Describes individually all parts and their functionality. Evaluates applicable control components. Thesis discuss design of safety circuit, that will secure safe use of instrument. Part of the thesis is realisation of electrical design and completing the control box.
Estilos ABNT, Harvard, Vancouver, APA, etc.
29

Kočár, Darius. "Tříosé ovládání tiskového stroje". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237210.

Texto completo da fonte
Resumo:
This thesis is about creating library for control of the 3D printing machine. Printer active axes are realized by stepper motors from Microcon Corporation connected with CD30x control unit. Communication between application and control units is via RS232 serial link. Part of this work is dedicated to application showing typical usage of this library.
Estilos ABNT, Harvard, Vancouver, APA, etc.
30

Mitáš, Daniel. "Ovládací rozhraní CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219821.

Texto completo da fonte
Resumo:
This project deals with portal-type CNC milling machine design and construction. CNC milling machine should be able to machining light metals and alloys. This document contains description of mechanical components selection, machine frame design and building, design and construction of USB motion control unit and also contains control software description and user manual.
Estilos ABNT, Harvard, Vancouver, APA, etc.
31

Běhůnek, David. "Návrh a výroba optického 3D scanneru". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417560.

Texto completo da fonte
Resumo:
The diploma thesis is focused on an optical method for 3D scanning. There is selected photogrammetry for creating 3D models. In the practical part, a mechanism for automatic photo capture is designed and manufactured and 3D printed with using a digital camera, Arduino microcontroller and stepper motors. There are proposed two methods of capturing photographs with which digital twins of reference objects are created. The result of the work is a functional 3D scanner. The next are evaluated used methods as well as the production costs and the time required by the operator when creating a digital copy of the object is listed.
Estilos ABNT, Harvard, Vancouver, APA, etc.
32

Krejčí, Jan. "CNC řízení frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442459.

Texto completo da fonte
Resumo:
This diploma thesis deals with rebuild of manual drill-mill machine BF20L into CNC mill machine, 3D model of that and eventual control using PLC. All axes are powered by stepper motors, with encoders, connected to control cards and industrial computer from company Beckhoff. For this control is made full switchboard, supplemented by electrical wiring diagram. Program control along with visualization is made in software TwinCAT 3. Drill-mill machine can be controlled manually or automatically by program.
Estilos ABNT, Harvard, Vancouver, APA, etc.
33

Valíček, Jan. "Návrh a realizace zařízení pro měření síly v tahu u SMD". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219998.

Texto completo da fonte
Resumo:
This thesis deals with the design and implementation of a device for measuring pull strength by surface mounted devices (SMD). It analyzes the theory of pull strength testing of solder joints with emphasis on standard IEC 62137-1-3 and describes the selection of components utilized to create mechanical construction and electrical parts. These electronic parts made or innovated in this work were control system based on microcontroler Atmega164P, power circuit for stepper motor and communication of measure equipment TEST 321 with PC. The whole design is complemented by simulation of mechanical stress to the critical components using ANSYS. The conclusion summarizes the most important parameters of this equipment.
Estilos ABNT, Harvard, Vancouver, APA, etc.
34

Hrubý, Michal. "Číslicově řízené dvouosé polohovací zařízení pro digitální fotoaparát". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218885.

Texto completo da fonte
Resumo:
This thesis introduces the construction design of two-axis positioning device to be used as panoramic head. Theoretical part explains parts of the device and in the practical part is the device assembled. The result is a complete positioning device for digital camera Canon EOS 500D and for similar camera.
Estilos ABNT, Harvard, Vancouver, APA, etc.
35

Zahradníčková, Ludmila. "Systém pro bezkontaktní měření otoku končetiny". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316746.

Texto completo da fonte
Resumo:
Determination of the extent and state of a limb edema is based on information about its current volume. There are a number of methods for volume measurements. The theoretical part of this semestral thesis discusses the etiology, classification and principles of volume measurements and basic information about ultrasound and stepper motors. The practical part consists of a design of own device for a contactless limb volume measurement with ultrasonic module. It consists of a code for a microcontroller which controles the whole system including the computational operations and a real model of the system.
Estilos ABNT, Harvard, Vancouver, APA, etc.
36

Pečenka, Tomáš. "Rotační manipulátor pro ruční svařování bubnů zakladače EXYZ". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318636.

Texto completo da fonte
Resumo:
The main aim of this diploma thesis is to design rotary manipulator for manual welding of hoist drums for EXYZ storage machine. The rotary manipulator is designed for improving of the quality of welds, which have been made in the static bearing welding process of hoist drum. The first part is concerned on the critical research of welding manipulators, which could be founded on the market. In the next part, there are sketched possible construction designs of welding manipulator based on the market offer. The main part of the diploma thesis is own construction design, which is made on the base of suggested concept of construction design.
Estilos ABNT, Harvard, Vancouver, APA, etc.
37

Dokulil, Marek. "Laserový řezací plotr ocelových plátů". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399193.

Texto completo da fonte
Resumo:
This diploma thesis is divided into two main parts. The first section is dedicated to the history and development of the laser technology. The second part describes all individual types of laser technology which are used in the industry nowadays. The next section follows with the research of various laser devices which serve mainly as a cutting tool. This knowledge gathered in the previous part was used to create the next part including the own conception of the machine. The second half of this diploma thesis deals with a research of software available at the market today. Eventually, after summarizing the characteristics of each software, the new concept and implementation of own software are made. In the final section, there are mentioned the possible extension and available upgrades. The reader should be able to create his/her own conception of the laser device and software after reading and understanding this paper.
Estilos ABNT, Harvard, Vancouver, APA, etc.
38

Dokulil, Marek. "Laserový řezací plotr ocelových plátů". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2018. http://www.nusl.cz/ntk/nusl-413352.

Texto completo da fonte
Resumo:
This diploma thesis is divided into two main parts. The first section is dedicated to the history and development of the laser technology. The second part describes all individual types of laser technology which are used in the industry nowadays. The next section follows with the research of various laser devices which serve mainly as a cutting tool. This knowledge gathered in the previous part was used to create the next part including the own conception of the machine. The second half of this diploma thesis deals with a research of software available at the market today. Eventually, after summarizing the characteristics of each software, the new concept and implementation of own software are made. In the final section, there are mentioned the possible extension and available upgrades. The reader should be able to create his/her own conception of the laser device and software after reading and understanding this paper.
Estilos ABNT, Harvard, Vancouver, APA, etc.
39

Bičiště, Jan. "Umělá aorta pro demonstraci činnosti intraaortální balonkové kontrapulzace". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218047.

Texto completo da fonte
Resumo:
This dissertation work describes design and construction of simulated aorta device intended to demonstrate performance of the intra-aortal balloon catheter (IAB), and to test reaction of the contra-pulsation pump during simulated cardiac output in conditions of tachycardia, bradycardia and arrhythmia. The major part of the device is transparent plastic tube. The pressure pulses (waves) are generated inside this plastic tube to simulate real cardiac output. These pressure pulses are generated by step motor with membrane. The step motor is controlled by programmable control system AMiNi-E. Individual pressure pulses simulate cardiac output in conditions of tachycardia, bradycardia and arrhythmia. Required simulated cardiac output is selected by control switches. Generated pressure pulses are read by pressure sensor and are transferred to the control system of the configuration computer. Read data can be displayed as graphs in program Microsoft Excel. The intra-aortal balloon catheter (IAB) is inserted inside the aorta and is connected with contra-pulsation pump which on pressure pulse is responding.
Estilos ABNT, Harvard, Vancouver, APA, etc.
40

Jeřábek, Vojtěch. "Systém automatického ladění pro sedmistrunné kytary". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318192.

Texto completo da fonte
Resumo:
The thesis describes a realization of the automatic self tuning system for sevenstring guitars. There are comparisons of commercial and uncommercial solutions for six-string guitars. There is also evaluation of useful parts for seven-string guitars. Thesis contains a description of a requirements for individual parts and a control software with respect on real guitar properties and used computing algorithm. In the second part of thesis, there is a description of final system design and its realisation including the control software. This is also related with testing of the entire system.
Estilos ABNT, Harvard, Vancouver, APA, etc.
41

Moštěk, Jiří. "Malý CNC stroj". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220350.

Texto completo da fonte
Resumo:
This diploma thesis deals with the design and construction of a three-axis CNC machine primarily designed for PCB drilling and production of front panels for various electronic devices. All three axes are driven by stepper motors NEMA 23 which are connected to stepper motor drivers L6470. Processor STM32F407 is used to control the whole machine. The wiring is completed by a LCD display with touchscreen which is used to communicate with user. Data for drilling can be entering manually or via USB inerface. Part of this thesis is the selection of a suitable construction and components, assembling equipment, wiring design of electronic circuits and writing the code to control the machine. Finally, the parameters of the designed device have been measured.
Estilos ABNT, Harvard, Vancouver, APA, etc.
42

Čoček, Jan. "Konstrukční řešení mechanismu napínací kladky zkušebního zařízení". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231728.

Texto completo da fonte
Resumo:
The aim of this diploma thesis is the design of automatic tensioning device for regulating forces in driving belts of high-pressure pumps under long-term testing, in collaboration with Bosch Diesel s.r.o. in Jihlava. The paper describes the development of the mechatronic device, from the selection of components, going through the design phase of the automatic electronic device, up to mechanical design and prototype execution. An assessment is made of custom device based on the test in real operations and economic benefits for the client are evaluated in the conslusion.
Estilos ABNT, Harvard, Vancouver, APA, etc.
43

Brňák, Jan. "Binokulární vidění". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219746.

Texto completo da fonte
Resumo:
This masters thesis deals with the physiology of binocular vision people for obtaining two dimensional spatial perception of images with glasses. There are developed theoretical part of the physiology of vision, then writing available methods that are now widespread for obtaining stereoscopic scene. The work also describes shooting dynamic scene using a pair of identical cameras. It focuses mainly on OFF-AXES method and deals with the topic of the settings stereoscopic base. There is also realized a practical part, which works with the capture dynamic scenes using video cameras with a automatic control of cameras distance. Automatic control is performed using the parallel port and a stepper motor. For this purpose it is designed to work in hardware support and a program for mutual communication. Filmed a short movie was screened to a group and those observers evaluated the parameters that were specified in the created poll.
Estilos ABNT, Harvard, Vancouver, APA, etc.
44

Kučera, Vítězslav. "Modernizace řídícího CNC systému frézky EMCO". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417576.

Texto completo da fonte
Resumo:
This master´s thesis deals with the modernization of the EMCO milling machine control system. The theoretical part is focused on the basic description of CNC machine and current state of EMCO milling machine control system. The main point of this thesis is new control system design for given milling machine, when the proposed variants are described and compared according to construction and price. The one variant is selected that best suits the specified parameters. Also, in the TwinCAT development interface from Beckhoff the new control system is created and described in the end of this work.
Estilos ABNT, Harvard, Vancouver, APA, etc.
45

Jašek, Dominik. "Vzdušný hokej - realizace a návrh automatického hráče". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416670.

Texto completo da fonte
Resumo:
This diploma thesis deals with the design and implementation of an automatic Air hockey player. In particular, a gaming table and a kinematic type of H-bot robot and electronics are designed. The movement of the robot is ensured by two stepper motors, which are controled by the Arduino Micro using timer interrupts. The thesis is improved by additional elements, such as goal detection using photoelectric sensors and automatic firing of the puck from the goal and others. The Air hockey robot was practically realized in cooperation with Ondřej Sláma.
Estilos ABNT, Harvard, Vancouver, APA, etc.
46

Hynčica, Tomáš. "Příprava scény pro detekci elektronických součástek". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218586.

Texto completo da fonte
Resumo:
This work describes development of control hardware and software for automatic production of tuning fork with tip for atomic force microscopy (AFM). A specialized device implementing the problem is developed and tested. The advantage of the proposed solution is the ability to produce the tuning forks with constant parameters, which is an important condition for successful work with the microscope.
Estilos ABNT, Harvard, Vancouver, APA, etc.
47

Menšík, Martin. "Konstrukce navíječky kompozitního izolátoru". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382124.

Texto completo da fonte
Resumo:
The aim of this master thesis is the construction of a single-purpose machine used for reeling of composite insulator. In the first part is described the technology of reeling completed by the analysis of used components. Based on the findings, the final constructional version with necessary calculations is stated. The result of this thesis is a 3D model of the chosen design together with drawings and calculations of given parts.
Estilos ABNT, Harvard, Vancouver, APA, etc.
48

Šubrt, Kamil. "Návrh zařízení pro měření smáčivosti povrchů". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230935.

Texto completo da fonte
Resumo:
This paper describes the design of equipment for measuring the wettability of surfaces. Surface wettability is determined by analyzing the profile drops, in an image taken with a digital camera. After the equipment is required to automatically find and focus the analyzed drops, taking the image, measuring wettability and save the image analysis, including measurement results to a file for subsequent offline analysis and archiving. The proposed facility is designed as a three-axis manipulator. For the driving the axes are chosen stepper motors. A key factor in achieving the highest possible speed measurement is very smooth movement of the manipulator, which is achieved by controlling of motors in microstepping mode with very high resolution. Software entire system is designed in the NI LabVIEW development environment for image processing was used module NI Vision.
Estilos ABNT, Harvard, Vancouver, APA, etc.
49

Juráň, Jakub. "Vývoj systému řízení astronomického dalekohledu s možností sledování družic". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377003.

Texto completo da fonte
Resumo:
The focus of this thesis is a development of an electronic guiding unit for a mount of an astronomical telescope allowing observations of artificial satellites orbiting the Earth. It contains a theoretical study of methods developed for the description of positions of objects observable on the celestial sphere, including systems used for storage of this information and regaining it in order to point the telescope in a specific direction. The work includes an analysis of the present supply of commercial devices, followed by a detailed description of the design developed here and its components. Finally, there is outline of possibilities of a future development of the system, focusing on software components.
Estilos ABNT, Harvard, Vancouver, APA, etc.
50

Malaník, Petr. "Řízení manipulátoru pro snímání sítnice oka". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2020. http://www.nusl.cz/ntk/nusl-417300.

Texto completo da fonte
Resumo:
To use the image of the retina for biometric or medical purposes, it is necessary that the image is of the highest quality and ideally covers the largest possible area. It is therefore necessary to move the sensing device to the most suitable position while ensuring its stability. A laboratory handling platform is used for this purpose. The platform is moved by stepper motors. A control board equipped with a microcontroller has been developed for their control, which allows very fine movements. The theoretical accuracy of the manipulator is up to 20 nm. Since it is necessary for sensing, to have proper retina illumination, the control system also includes adjustable illumination elements in the infrared and visible spectrum. The resulting system allows scanning of the retina of the eye from multiple angles and thereby effectively increase the area on which it is possible to further look for diseases or biometric features.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia