Bibliografias temáticas / LabView / Teses / dissertações
Siga este link para ver outros tipos de publicações sobre o tema: LabView.

Teses / dissertações sobre o tema "LabView"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 25 de julho de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "LabView".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.

1

Selinger, Michal. "MathScript v LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217555.

Texto completo da fonte
Resumo:
SELINGER, M. MathScript in LabVIEW. Brno: Brno University of Technology, The Faculty of Electrical Engineering and Communication, 2008. 92 pages. Supervisor Ing. Miloslav Čejka, CSc. The main goal of this Thesis is to examine the portability of the m-scripts between The National Instruments LabVIEW MathScript and The MathWorks MATLAB development programs. The Thesis deals with function differences execution speeds and giving overview of using The National Instruments LabVIEW MathScript programme.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Nilsson, Andréas, and Michael Hansén. "Ugnet : Provugnsstyrning med LabVIEW." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-18693.

Texto completo da fonte
Resumo:
This report contains a programming improvement work in a LabVIEW™ fire testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected. The task consisted of gaining knowledge of LabVIEW™ and the control system in whole. A further necessary measure is needed concerning program interface and localisation and eliminati
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Mazal, Ctibor. "LabVIEW instrument control toolbox." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221273.

Texto completo da fonte
Resumo:
This diploma thesis is containing the description of the LabVIEW Instrument Control Toolbox project. Initial preparations like the development environment choosing process, as well as the instrument driver layer choice are present along with the project requirements. A signal approach to the instrument control is defined and described in detail. This thesis also contains the main project development in The National Instruments LabVIEW and at the end, a detailed description and user guidance for each developed and fully integrated toolbox module.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Jeřábek, Martin. "Sběr dat pomocí LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219326.

Texto completo da fonte
Resumo:
The main objective of this work is to create a program for automatic operation of measuring test track. The track is used for multi-hole velocity probes calibration. Normalized orifice plate is used as measurement standard. The program requires the user to enter certain information, which are not measured directly e.g. the values of measuring resistors, static air pressure. After entering this information, measurement can be started. The measurements are carried out simultaneously on the both flowmeters and on the thermomether Pt 100. The actual density of flowing medium is calculated from the
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Narashimhamurthy, Chetan. "Phase Locked Loop using LABVIEW." Thesis, Linnéuniversitetet, Institutionen för fysik och elektroteknik (IFE), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-82408.

Texto completo da fonte
Resumo:
The phase-locked loop is an important concept in the field of wireless communication. PLL:s have wide-ranging applications in many electronic circuits. The history and the basic principle of the phase-locked loop are discussed. The different building blocks and their roles are also described along with some of the major applications ofphase-locked loops. The thesis mainly describes how to build a phase-locked loop circuit using LabVIEW, as a laboratory experiment intended for a course in Radio Engineering. It was previously implemented in PSpice and this is described for comparison. The basic f
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Schelle, Igor. "Experimentální ultrazvuková měření pomocí LabView." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219239.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Pogula, Sridhar Sriram. "Developing neural network applications using LabVIEW." Diss., Columbia, Mo. : University of Missouri-Columbia, 2005. http://hdl.handle.net/10355/4251.

Texto completo da fonte
Resumo:
Thesis (M.S.)--University of Missouri-Columbia, 2005.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (July 14, 2006). Includes bibliographical references.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Zhiyuan, Xie. "Control of biogas reactor by Labview." Thesis, Linnaeus University, School of Computer Science, Physics and Mathematics, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-5976.

Texto completo da fonte
Resumo:
<p>In this bachelor thesis we focus on how to controlling different machines that would be used in the Bio-gas production processes. By useing the Labview program, we can do controlling, detecting, data storing and other jobs all together.</p><p>The whole project is just a blueprint for the following work, as for there are too many components and units that we haven't seen yet. What we have done is to design a program that could be used in reality base on the principle of the whole bio-gas producing processes. Actually we did a quite good job on designing the limited machines that we have in h
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Deshpande, Parikshit Bapusaheb. "Automated sleep scoring system using labview." Texas A&M University, 2005. http://hdl.handle.net/1969.1/3187.

Texto completo da fonte
Resumo:
Sleep scoring involves classification of polysomnographic data into the various sleep stages as defined by Retschaffen and Kales. This process is time-consuming and laborious as it involves experts visually scoring the data. During recent years, there has been an increasing focus on automated sleep scoring systems and professional software programs are finding increased use. However, these systems are not relied on for scoring and are often used as a tool that facilitates easy visual scoring. This thesis proposes a neural network based approach to automatic sleep scoring using LabVIEW. Effort
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Horan, Stephen. "A LABVIEW-BASED CHANNEL ERROR SIMULATOR." International Foundation for Telemetering, 1999. http://hdl.handle.net/10150/606820.

Texto completo da fonte
Resumo:
International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>A PC-based space channel error simulator that includes differing forward and return data links, independent statistical characterization of the data links, and link propagation delay has been developed. The LabVIEW programming language has been used to configure this containing all of the error generation and processing in software. The simulator is used for testing networking protocols in a simulated space channel environment and can be used for other types
Estilos ABNT, Harvard, Vancouver, APA, etc.
11

Mauldin, Kendall. "NETWORKING SATELLITE GROUND STATIONS USING LABVIEW." International Foundation for Telemetering, 2002. http://hdl.handle.net/10150/607487.

Texto completo da fonte
Resumo:
International Telemetering Conference Proceedings / October 21, 2002 / Town & Country Hotel and Conference Center, San Diego, California<br>A multi-platform network design that is automated, bi-directional, capable of store and forward operations, and low-bandwidth has been developed to connect multiple satellite ground stations together in real-time. The LabVIEW programming language has been used to develop both the server and client aspects of this network. Future plans for this project include implementing a fully operational ground network using the described concepts, and using this netwo
Estilos ABNT, Harvard, Vancouver, APA, etc.
12

Ruhás, Sándor. "Řízení BLDC motoru pomocí LabView FPGA." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376920.

Texto completo da fonte
Resumo:
This thesis focuses on BLDC motor control algorithms with model based design approach. Models and control algorithms were programmed in LabView, the NI MyRIO was used as a hardware platform. For hall-sensor feedback controlled application an already finished power inverter was used from a Honeywell rotary actuator. For sensor-less motor control an indirect sensing of BEMF signal is applied using motor phase current measurement. The time-critical parts of the algorithms are programmed for FPGA, the non-time-critical parts are programmed for LabView Real-Time module.
Estilos ABNT, Harvard, Vancouver, APA, etc.
13

Loun, Lukáš. "Analýza stejnosměrného stroje pomocí programu LabView." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217637.

Texto completo da fonte
Resumo:
The virtual laboratory is divided into two groups. The first group is comprised of a virtual laboratory for simulation. It is mostly used for presentation and demonstration purposes. It is not necessary to install complicated and expensive software for their use. The second group of the virtual laboratory is a long distance measure. Real systems are measured with the help of this laboratory. The advantage of long distance measuring is that data from the measurements are saved directly onto the personal computer and they can be immediately evaluated. In this project the procedure for creating a
Estilos ABNT, Harvard, Vancouver, APA, etc.
14

Válek, Petr. "Vlastnosti systému reálného času v LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219687.

Texto completo da fonte
Resumo:
This thesis deals with certain properties of real time operating systems (RTOS) Ardence PharLap ETS, WindRiver VxWorks and LabVIEW RT module. Three methodologies of RTOS quality comparison are proposed, two of which are practically tested with described experiments on CompactRIO hardware from NI. Furthermore, there is explained need for RTOS usage and experimental comparison of jitter error influence on total harmonic distortion THD defined by two definitions.
Estilos ABNT, Harvard, Vancouver, APA, etc.
15

Halfar, Lukáš. "Automatizované měření asynchronního motoru pomocí LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242151.

Texto completo da fonte
Resumo:
The main purpose of the thesis Automatic measurement of induction machine using LabVIEW was to develope an automated measuring system, which is used to perform tests of induction motors. The algorithm of the system is programmed in LabVIEW. In the practical part of this thesis, a measurement of the motor Atas Elektromotory Náchod a.s. T22VT512 is carried out, in order to verificate functions of the algorithm, and to perform tests of the motor to analyse losses. Another part of the work is dedicated to the electromagnetic calculation of the motor T22VT512. For this purpose, two softwares with d
Estilos ABNT, Harvard, Vancouver, APA, etc.
16

GILANI, HASSAN, and RAISUL BHUIYAN. "Development of ADQ214 user interface in labVIEW." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5451.

Texto completo da fonte
Resumo:
This thesis was conducted in collaboration with Signal Processing (SP) Devices Sweden AB. SP Devices provides digital signal processing solutions for the enhancement of analogue to digital conversion (ADC). Their ADCs facilitate the development of products for Communications, Radio base stations, Radar, Signals intelligence and Test &amp; Measurement. The ADQ series digitizers, from SP Devices, are portable high performance digitizers which incorporate one or more analog inputs, an on-board double data rate (DDR2) memory and USB or PXI Express interface. DDR2 refers to the ability of a compute
Estilos ABNT, Harvard, Vancouver, APA, etc.
17

Tang, Shengjie. "Rail Platform Obstacle Detection Using LabVIEW Simulation." Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-19063.

Texto completo da fonte
Resumo:
As the rapid development of the rail transportation industry, rail transportation becomes more popular as a component of urban public transport systems, but the fallen obstacle(s) from the rail platform becomes the terrible hidden danger for the rail transportation. As an enclosed public transport systems, rail transportation creates gathered crowd both on board and on the platform. Although railway is the safest form of land transportation, it is capable of producing lots of casualties, when there is an accident.There are several conventional systems of obstacles detection in platform monitor
Estilos ABNT, Harvard, Vancouver, APA, etc.
18

Yu, Hongji. "Temperature control in PID controller by Labview." Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-17706.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
19

Giri, Deepak. "Flight Path Simulation in LabVIEW using LDAR." International Foundation for Telemetering, 2015. http://hdl.handle.net/10150/596453.

Texto completo da fonte
Resumo:
ITC/USA 2015 Conference Proceedings / The Fifty-First Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2015 / Bally's Hotel & Convention Center, Las Vegas, NV<br>This paper compares the results of the MATLAB flight path simulation earlier with the LabVIEW software defined radio module which is being developed at Morgan State University in collaboration with Georgia Tech. Research Institute under the Link Dependent Adaptive Radio (LDAR) project. In LDAR, the communication parameters such as modulation size and coding rate are updated based on the channel co
Estilos ABNT, Harvard, Vancouver, APA, etc.
20

Abbas, Azhar. "GPIB- kommunikation och PID reglering med LabVIEW." Thesis, Karlstads universitet, Fakulteten för teknik- och naturvetenskap, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4714.

Texto completo da fonte
Resumo:
LabVIEW ger en snabb och enkel tillgång till att styra instrument och en mycket stor databas med drivrutiner för DAQ-kort och olika datorgränssnitt (GPIB, serie, osv.). Många instrument och datorer kan anslutas till GPIB-bussen.  Detta kan ge en praktisk modell för utveckling av instrumentets styrprogram i LabVIEW med hjälp av GPIB-gränssnittet. Ett program i LabVIEW 8.2 med hjälp av GPIB-bussen kan kopplas till t.ex. multimetern (HP-34401A) för att mäta och visa multimeters noggrannhet. Men på grund av fel i drivrutiner för GPIB-gränssnittet kunde jag inte köra programmet med GPIB-bussen. Gen
Estilos ABNT, Harvard, Vancouver, APA, etc.
21

Izidro, Mafalda Sofia Moura Moraes. "Real-time labview assessment on adsorption systems." Master's thesis, Faculdade de Ciências e Tecnologia, 2014. http://hdl.handle.net/10362/11390.

Texto completo da fonte
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica<br>This work aims to develop a LabVIEW interface for monitoring, controlling and automate the simultaneous experimental determination of one adsorption isotherm of gas in two distinct solid adsorbents. The magnetic suspension balance has two samples and this way it’s possible to determinate, simultaneously, the equilibrium adsorption for two different adsorbents. The developed software allows the registration of weight values and the control of the state of the balance, which has three main positions (ZP, MP1 and
Estilos ABNT, Harvard, Vancouver, APA, etc.
22

He, Fan. "Implementation of Fourier Repetitive Control in Labview." Thesis, North Dakota State University, 2014. https://hdl.handle.net/10365/27542.

Texto completo da fonte
Resumo:
This thesis presents position control as well as current (torque) control of a DC servo motor with a periodic input. Position control is achieved by using Fourier repetitive control scheme. Simulation on position control is carried out and results discussed. Experiment is executed based on a testing platform that is built using two, mechanically linked DC servo motors and LabVIEW to incorporate the Fourier repetitive control algorithms. The experiment results validate the feasibility of controlling motor positions via Fourier repetitive control scheme. Suggestions on improving the implementati
Estilos ABNT, Harvard, Vancouver, APA, etc.
23

Thulin, Marlene. "LabView-baserat produktionstest för borstlösa trefasiga likströmsmotorer." Thesis, KTH, Hälsoinformatik och logistik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-253033.

Texto completo da fonte
Resumo:
Testning är en viktig del i tillverkningskedjan för att säkerställa kvalitet och funktion hos elektronikprodukter, och utförs ofta på flera nivåer innan den färdiga produkten lämnar fabriken. Produktionstester är rutinmässiga tester som tillämpas under masstillverkning och vid utformning av dessa måste tidseffektivitet prioriteras för att minimera negativ inverkan på produktionstakten. I detta projekt överfördes ett produktionstest för färdigmonterade borstlösa DC-motorer med drivelektronik till en ny testutrustning hos företaget Allied Motion. Testet skulle moderniseras och införas i företage
Estilos ABNT, Harvard, Vancouver, APA, etc.
24

Bugla, Marek. "Virtuální laboratoř na bázi JAVA a LABVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217510.

Texto completo da fonte
Resumo:
Dielektrické materiály jsou použivány v elektronice i v elektrotechnice. Jako jejich základní vlastnost může považovat změnu jejich charakteristik během jejich životnosti. Změny jsou způsobeny namáhaním materiálu vyvolané elektrickými či teplotími vlivy. Možnost jak určit průběh jejich charakteristik v závislosti na čase je měření proudu během aplikování elektrického napětí na materiál. Tyto experimenty vědci z LEMD provaděli ručně, tento postup ale není přílíš učinný pro vysokofrekvenční signály nebo pro experimenty s dlouhou periodou. Hlavním cílem této práce bylo vytvořit aplikaci v LabVIEW
Estilos ABNT, Harvard, Vancouver, APA, etc.
25

Kufa, Daniel. "Automatizované měření automobilových alternátorů pomocí programu LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217919.

Texto completo da fonte
Resumo:
This work presents development system LabVIEW and the possibility to create virtual measuring devices. Particular realization of virtual measuring device within the frame of this work is applied on measurement of basic characteristics of claw-pole alternator. The structure and the principle of function of this alternator is described in brief. Created virtual measurement device is described in detail. The entire block scheme, that is the source code for LaBVIEW development system, is attached only in electronic form. The printed version contains front panel of the device and almost all the str
Estilos ABNT, Harvard, Vancouver, APA, etc.
26

Strmeň, Milan. "Měření teploty v elektrických strojích pomocí LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218995.

Texto completo da fonte
Resumo:
This work deals with using of virtual instrumental program LabView as a tool for thermal measuring at the surface of asynchronous engine. Its part is managing of problems of measuring by the aid of thermocouple, mainly conversion of thermoelectric voltage on temperature. The product of work is program which measures and displays required form and records values of temperature from four parallel branches of thermocouples.
Estilos ABNT, Harvard, Vancouver, APA, etc.
27

Sláma, Eduard. "Návrh systému pro sběr provozních dat obráběcího stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378741.

Texto completo da fonte
Resumo:
The aim of the diploma thesis is to make functional application for design of DAQ system for productive machine by using LabVIEW and platforms cRIO. The first part is focused on productive machine. After the thesis continues with specific examples. These examples have impact on machining accuracy and their measurements. The second part of diploma thesis is focused on making measurement program. LabVIEW FPGA Module, LabVIEW Real-Time Module are used in the program.
Estilos ABNT, Harvard, Vancouver, APA, etc.
28

Bezerra, Adriano Carlos Nogueira. "Proposta para implementação de uma bancada dinamométrica automatizada para ensaios em tempo real de motores de combustão interna do ciclo Otto." Universidade de São Paulo, 2000. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-11072018-102056/.

Texto completo da fonte
Resumo:
Com o advento da crise do petróleo na década de 70, os motores, que antes eram calibrados para fornecer máximos torque e potência, após a crise passaram a ser calibrados de forma a fornecer consumo específico e emissões mínimos. A partir de então os motores passaram a ser ensaiados em bancadas dinamométricas que possuíam módulo para medição de emissões e que simulavam condições mais reais de tráfego, segundo um ciclo de ensaios preestabelecido. Este trabalho contém um levantamento bibliográfico sobre o instrumental, metodologias e procedimentos utilizados nos ensaios dinamométricos permanentes
Estilos ABNT, Harvard, Vancouver, APA, etc.
29

Проценко, Сергій Іванович, Сергей Иванович Проценко, Serhii Ivanovych Protsenko та М. В. Бібик. "Реалізація технологій машинного зору за допомогую віртуальних інструментів LabVIEW". Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/4336.

Texto completo da fonte
Resumo:
Метою даної роботи було розробити систему для автоматизації експерименту при дослідженні тензорезистивних властивостей тонких плівок. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/4336
Estilos ABNT, Harvard, Vancouver, APA, etc.
30

Huff, Michael R. "A LabVIEW- based wind tunnel data acquisition system." Thesis, Monterey, California. Naval Postgraduate School, 1998. http://hdl.handle.net/10945/8605.

Texto completo da fonte
Resumo:
Approved for public release; distribution is unlimited<br>The NPS Aerolab Low Speed Wind Tunnel located in Halligan Hall of the Navy Postgraduate School has been in operation since 1953. Although the tunnel is well maintained, its data acquisition system has not kept pace with modem technology. An effective but affordable solution for acquiring data was needed. It was determined that a software package known as LabVIEW would provide a low cost, data acquisition solution that will enhance the capabilities of the wind tunnel, while at the same time making it more user friendly to faculty and stu
Estilos ABNT, Harvard, Vancouver, APA, etc.
31

Horan, Stephen. "Using Labview to Design a Payload Control System." International Foundation for Telemetering, 2008. http://hdl.handle.net/10150/606179.

Texto completo da fonte
Resumo:
ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California<br>As part of a project to develop small satellites, we have developed a combined ground station and flight computer control software package using LabVIEW. These computer systems are used to acquire data from sensors, control communications links, provide automatic data acquisition capabilities, and provide a user interface. In this paper, we will look at the state machines that d
Estilos ABNT, Harvard, Vancouver, APA, etc.
32

Галюров, А. В., та В. П. Ларшин. "Формирование информационных сигналов реального времени в системе LabVIEW". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38051.

Texto completo da fonte
Resumo:
Современные компьютерные системы технологической диагностики процессов резания могут быть выполнены на основе различных компьютерных прикладных программ по обработке сигналов, к числу которых принадлежат, например, приложения системы сбора данных LabVIEW (компания National instruments), пакет прикладных программ МATLAB и Simulink (компания Mathworks).
Estilos ABNT, Harvard, Vancouver, APA, etc.
33

Хіхло, О. Ю., Олена Євгенівна Тверитникова та О. В. Хіхло. "Віртуальний випробувальний комплекс на базі програмного пакету LabVIEW". Thesis, ТОВ "В справі", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/46860.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
34

Andersson, Sam, and Carl Svantesson. "Styrning av servomotor med LabVIEW och DAQ-kort." Thesis, KTH, Hållbar produktionsutveckling (ML), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-300187.

Texto completo da fonte
Resumo:
På KTH-Södertälje finns laborationsutrustning som inte har använts på länge. Utrustningen som behandlats i detta examensarbete är ett antal servobord. Ett servobord har en servomotor som roterar en cirkulär platta. Plattan är försedd med vita fält och en visare, och på utsidan av plattans omkrets finns markörer för olika vinklar. Detta tillåter att motorns vridningsvinkel går att avläsa. De vita fälten på plattan kan avläsas med optiska sensorer och möjliggör att motorn kan styras med hjälp av pulser. Motorn på servobordet är även sammanlänkad med en potentiometer. Potentiometern tillåter att
Estilos ABNT, Harvard, Vancouver, APA, etc.
35

Stejskal, David. "System On-/Offline merania teploty na báze LabView." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402511.

Texto completo da fonte
Resumo:
The objective of this thesis was to create a LabVIEW-based program for temperature measurement using a personal computer. The program allows reading and post processing of digital signal from a measuring device. This device consists of a sensor type PT100, a measuring transducer and an analog-to-digital converter with USB output. The theoretical part of the thesis deals with resistance temperature sensors, signal analysis and methods for signal processing. The practical part is conceived as a guide to the created program. This part introduces vital sub-elements of the program and describes the
Estilos ABNT, Harvard, Vancouver, APA, etc.
36

Lin, Jen-Pin. "Impedance Extraction by MATLAB/Simulink and LabView/Multisim." Scholar Commons, 2014. https://scholarcommons.usf.edu/etd/5257.

Texto completo da fonte
Resumo:
This thesis studies the techniques of small-signal impedance measurement in three-phase power systems. Stability issue has become critically important since power electronics are highly applied in power distribution and conversion systems. Controlled output systems cause the risk of instability. In order to obtain the impedance model, an impedance extraction in D-Q reference frame algorithm is developed. This paper also applied Interpolated Fast Fourier Transform to increase accuracy of impedance model. Based on the voltage injection, Phase-Locked Loop, Park Transform, D-Q reference frame, and
Estilos ABNT, Harvard, Vancouver, APA, etc.
37

Princ, Pavel. "Měření a analýza jednofázového transformátoru s pomocí LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218795.

Texto completo da fonte
Resumo:
The aim of that diploma thesis is low power transformer simulation via its substitutitional circuitry.As Instrument for matematical description of model and simulation of various operating situations with different amplitude and types of load was used Labview software. The software was simultaneously used for real transformer measurement and to compare these results with calculated values. The created program is also applied for measuring excercise for students. In The thesis is described measured transformer in terms of final elements method in FEMM software and there is showed the procedure
Estilos ABNT, Harvard, Vancouver, APA, etc.
38

Kormanovskaya, Elena. "Zařízení pro měření koncentrace intracelulárního vápníku v LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220284.

Texto completo da fonte
Resumo:
The master’s thesis deals with the methods and system for measurement of concentration of intracellular calcium in LabVIEW. The thesis included theoretical and practical parts. The thesis covers the theory of fluorescence principles, fluorescence methods and indicators for measurement of concentration of intracellular calcium. The procedure of measurement by means of fluorescence microscope, camera and indicators is also mentioned. Literary solution is presented. Block diagram of system for measurement of concentration of intracellular calcium at a graphical programming environment LabVIEW is
Estilos ABNT, Harvard, Vancouver, APA, etc.
39

Pochlopeň, Timotej. "Zařízení pro měření koncentrace intracelulárního vápníku v LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220566.

Texto completo da fonte
Resumo:
Master‘s thesis deals with the methods and system for measurement of concentration of intracellular calcium in LabVIEW. The thesis covers the theory of fluorescence principles, fluorescence methods and indicators for measurement of concentration of intracellular calcium. The procedure of measurement by means of fluorescence microscope, camera and indicators is also mentioned. The theory dealing with confocal microscopy is presented and two techniques are compared. Literary solution is presented. The practical part describes the program with a graphical user interface used for acquisition and a
Estilos ABNT, Harvard, Vancouver, APA, etc.
40

Jančík, Stanislav. "Simulační modely EDUmod pro PLC v NI LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228334.

Texto completo da fonte
Resumo:
This diploma thesis discusses the connection trough the programmable automation (PLC) with a personal computer (PC) for the purpose of operating software simulation in NI LabVIEW. Diploma thesis is divided in two main parts. Design and manufacture of the communication unit, which is in charge of communication between PC and PLC and further programming simulation models in software NI LabVIEW.
Estilos ABNT, Harvard, Vancouver, APA, etc.
41

Saunders, Carrie L. "LABVIEW SOFTWARE DEVELOPMENT FOR INPUT AND OUTPUT MEASUREMENT AND CONTROL OF FLEXLAB." Ohio University / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1164215153.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
42

Rodrigues, Yklys Santos. "Otimização de um sistema de controle e aquisição de dados para calibração de medidores de radiação X com utilização de ferramentas computacionais." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/85/85131/tde-28082013-141544/.

Texto completo da fonte
Resumo:
A norma da ABNT ISO/IEC 17025/2005 especifica requerimentos gerais para competência de laboratórios de ensaio e calibração. Um destes requerimentos é que instalações desses tipos devem sempre ter seus processos otimizados e para tal é necessário que as incertezas envolvidas sejam estimadas e reduzidas o máximo possível. Para atingir tal quesito, o Laboratório de Calibração de Instrumentos (LCI), o laboratório responsável por calibrações de dosímetros no Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN), tem adquirido vários equipamentos para suas instalações, e em especial para o Labo
Estilos ABNT, Harvard, Vancouver, APA, etc.
43

Ek, Fredrik. "Undersökning och utformning av ett generellt datainsamlingssystem i LabVIEW." Thesis, Linköping University, Department of Biomedical Engineering, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2933.

Texto completo da fonte
Resumo:
<p>This report is the result of a diploma work made at IMT at US in Linköping. The purpose of this piece of work is to investigate the possibility to design a general program for data-acquisition using LabVIEW, suiting different hardwares and connections. Great importance has been attached to communication with serialport, using bluetooth, because different wireless PPG-instruments has been developed parallel to this project. These PPG-circuits uses this type of serialcommunication. Communication with USB, GPIB and analog connection has also been examined and analog communication has been test
Estilos ABNT, Harvard, Vancouver, APA, etc.
44

Shen, Lao, and Ye Chaoran. "Identification of parameters for a DC-motor by LabVIEW." Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-19970.

Texto completo da fonte
Resumo:
Abstract In this bachelor thesis we focus on how the computer software LabVIEW test is used to a DC-motor through as a hardware incremental encoder and a USB-6009. By using LabVIEW, we can do pulse counting, voltage changing test, voltage signal acquiring and some other observing jobs. This paper is a report of our mechanical operation and calculative work about the DC motor as well. The using DC motor's model number is E-660. Since we cannot find the official data of the DC motor we need, we tried to find some similar motor model to compare. Fortunately, we find some data. Even it is unoffici
Estilos ABNT, Harvard, Vancouver, APA, etc.
45

Turan, Ceyhan Kutlu Akif. "Endüstriyel ağ kullanarak LabVIEW ile elektronik deney modüllerinin yönetimi /." Isparta : SDÜ Fen Bilimleri Enstitüsü, 2007. http://tez.sdu.edu.tr/Tezler/TF01125.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
46

Cao, Letian, and Yuankai Guan. "Use of digital filters based on Labview and Matlab." Thesis, Linnéuniversitetet, Institutionen för fysik och elektroteknik (IFE), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-45703.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
47

Chia, Loayza He Antonio Ju Sen. "Programación LabView para sistema de adquisición de datos ultrasónicos." Bachelor's thesis, Pontificia Universidad Católica del Perú, 2014. http://tesis.pucp.edu.pe/repositorio/handle/123456789/6077.

Texto completo da fonte
Resumo:
El Laboratorio de Imágenes Médicas de la PUCP cuenta con los equipos y herramientas necesarias para la implementación de un sistema de adquisición de datos de transductores ultrasónicos de un solo elemento, como el hardware de un posicionador de tres ejes de alta resolución (402/403XE Series - Parker), un emisor/receptor de ultrasonidos (Panametrics NDT 5800 - Olympus) y una tarjeta de adquisición de datos (UF3-4142 - Strategic Test). En el presente trabajo de tesis se diseñó e implementó un sistema de adquisición de datos ultrasónicos a través de una interfaz gráfica manipulada por el usuario
Estilos ABNT, Harvard, Vancouver, APA, etc.
48

Laird, Daniel T. "Automatic Gain Control and Doppler Motion Models in LabVIEW." International Foundation for Telemetering, 1998. http://hdl.handle.net/10150/609228.

Texto completo da fonte
Resumo:
International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California<br>A simplex or ‘passive’ continuous wave and monopulse seeker tracks specific attributes of a target’s radio frequency (RF) radar return in some coordinate frame. In particular, a return carries dynamic information in amplitude (ω) and frequency (ω) at some point in azimuth (r,θ) and elevation (r,θ) planes. A passive seeker requires an illuminator beam, I(ω,φ,θ), and may require a frequency modulation on the illuminator. To model a simplex target r
Estilos ABNT, Harvard, Vancouver, APA, etc.
49

Мірошніченко, М. О. "Моделювання роботи датчика руху людини у системі проектування LabView". Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/44286.

Texto completo da fonte
Resumo:
Розвиток сучасної елементної бази дозволяє використовувати пристрої, які раніше застосовувалися тільки в складних і дорогих професійних комплексах, для створення побутових пристроїв. Будь-які нагріті предмети, включаючи людське тіло, є джерелами інфрачервоного випромінювання. Ця властивість використовується для створення пасивних датчиків руху в системах охорони приміщень. Називаються такі пристрої - "піроелектричні датчики" і складаються з інфрачервоного приймача теплового випромінювання. Інфрачервоний приймач - це спеціальний фотоелемент, який виробляє електричний сигнал пропорційний рівню,
Estilos ABNT, Harvard, Vancouver, APA, etc.
50

Majvald, František. "Metody akustické holografie v blízkém poli v prostředí LabVIEW." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442539.

Texto completo da fonte
Resumo:
Near-field acoustical holography is a standard method for sound source visualization and localization. In this thesis, commonly used and newly published near-field acoustic holography methods are introduced and analysed. In addition, regularization methods are presented together with finding options of optimal regularization parameter. Based on theory, a LabVIEW library is built containing four implemented near-field acoustical holography algorithms and two regularization methods. To verify the correctness of implementations, a testing application has been made. This application allows testing
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado em listas de outros tipos de fontes sobre o assunto "LabView":
Artigos de revistas Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia