Conecte-se

Bibliografias temáticas / Mesh layer

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Mesh layer"

Autor: Grafiati

Publicado: 7 de junho de 2025

Última modificação: 2 de agosto de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Mesh layer".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Mesh layer"

1

Garanzha, Vladimir A., Lyudmila N. Kudryavtseva, and Aleksei I. Belokrys-Fedotov. "Single and multiple springback technique for construction and control of thick prismatic mesh layers." Russian Journal of Numerical Analysis and Mathematical Modelling 36, no. 1 (2021): 1–15. http://dx.doi.org/10.1515/rnam-2021-0001.

Texto completo da fonte

Resumo:

Abstract We suggest an algorithm for construction of semi-structured thick prismatic mesh layers which guarantees an absence of inverted prismatic cells in resulting layer and allows one to control near-surface mesh orthogonality. Initial mesh is modelled as a thin layer of highly compressed prisms made of hyperelastic material glued to the triangulated surface. In order to compute robust normals at the vertices of the surface mesh we use quadratic programming algorithm based on the nearest ball concept. This pre-stressed material expands, possibly with self-penetration and extrusion to exteri

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

YERLİYURT, Kaan, and Sinan EĞRİ. "Effect of Knitting Pattern of PP Mesh on the Flexural Properties of Heat-cured PMMA Denture Base Resin." Cumhuriyet Science Journal 44, no. 3 (2023): 464–69. http://dx.doi.org/10.17776/csj.1184249.

Texto completo da fonte

Resumo:

Heat-cured polymethyl methacrylate is (PMMA) is the most common denture base material and some mechanical properties such as flexural strength and impact resistance etc. may lead to fail, besides its excellent properties. Polypropylene (PP) hernia mesh is a commercially available medical textile used in surgical repair of different types of hernia. It was aimed to investigate the effect of two different knitting patterns of PP meshes on the flexural properties of the PMMA denture base resin when they are used as reinforcement and compare with glass fiber mesh reinforced and no mesh used resins

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Wu, Ang, Juan Hua Zhu, and Juan Fang Zhu. "Research on MAC Layer Supporting MESH Model in IEEE 802.16." Advanced Materials Research 187 (February 2011): 746–51. http://dx.doi.org/10.4028/www.scientific.net/amr.187.746.

Texto completo da fonte

Resumo:

IEEE802.16 standard provides interface protocol of wireless access system for physical (PHY) layer and Medium Access Control (MAC) layer. It supports two kinds of network topology: Point to Multi-point (PMP) and Mesh. This paper descries the MESH model characteristics and how MESH Model was supported in MAC layer by introducing full process of new nodes in Mesh mode accessing network. Furthermore, On the basis of comparing PMP model and MESH mode in MAC-layer structure, function and requirements, it comes to the conclusion: MESH nodes can access network faster and cost less than PMP nodes. Whi

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Vorkapić, Miloš, Danica M. Bajić, Marija Baltić, Dušan Nešić, and Ivana Mladenović. "Mechanical properties of laminate materials based on polylactic acid and polyvinyl chloride meshes as reinforcement." Tribology and Materials 3, no. 1 (2024): 35–43. http://dx.doi.org/10.46793/tribomat.2024.005.

Texto completo da fonte

Resumo:

The 3D printing parameters are known to have a significant impact on manufactured parts, and the layered morphology of these parts makes mechanical design analysis for engineering applications difficult. In this work, the tensile strengths and microhardness of 3D printed polylactic acid (PLA) specimens with different orientations and numbers of individual layers of mesh material (polyvinyl chloride – PVC) were investigated as a laminate composite. Composite specimens were obtained using 3D printing via fused deposition modelling (FDM). Moreover, the influence of printing parameters (i.e. infil

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Yang, L. X., R. G. Allen, K. Scott, P. Christensen, and S. Roy. "A New PtRu Anode Formed by Thermal Decomposition for the Direct Method Fuel Cell." Journal of Fuel Cell Science and Technology 2, no. 2 (2004): 104–10. http://dx.doi.org/10.1115/1.1867975.

Texto completo da fonte

Resumo:

New PtRu catalyst anodes for methanol oxidation were prepared by a thermal decomposition method on titanium mesh supports. The supports employed were: Single layer (titanium mesh), double layer (two layers of titanium mesh were spot-welded together), and triple layer (two layers of titanium mesh with carbon paper between were spot-welded together). The catalytic activity of such anodes for the oxidation of methanol was characterized using galvanostatic measurements and electrochemical impedance spectroscopy in combination with scanning electron microscopy. The results showed that the PtRu cata

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Mehmood, Tahir, Muhammad Amer Abid, Burachat Chatveera, et al. "Sustainable Reinforcement Methods for Brick Masonry Walls: An Experimental and Finite Element Analysis Approach." Buildings 15, no. 13 (2025): 2180. https://doi.org/10.3390/buildings15132180.

Texto completo da fonte

Resumo:

This study investigates the enhancement of axial and shear strength in brick masonry walls reinforced with steel and fiberglass meshes. The novelty of this study lies in its thorough evaluation of various reinforcement types and their influence on both axial and shear strength, offering valuable insights to enhance the performance of brick masonry structures. By using steel and fiberglass meshes for reinforcement, the study promotes the use of durable materials that can extend the lifespan of brick masonry structures, reducing the need for frequent repairs and replacements. The findings reveal

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Lin, Hong, Qin Kong, Xinyu Xu, et al. "Higher Soil Mesofauna Abundance and Microbial Activities Drive Litter Decomposition in Subtropical Forests." Diversity 16, no. 11 (2024): 700. http://dx.doi.org/10.3390/d16110700.

Texto completo da fonte

Resumo:

Soil fauna play an important role in litter decomposition and affect the “home-field advantage” (HFA) of litter decomposition. However, how this effect is modulated by the microenvironment needs further investigation. We conducted a reciprocal transplant experiment of litter decomposition using different mesh-size litterbags across litter and soil layers in subtropical coniferous (Pinus massoniana) and broad-leaved (Quercus variabilis) forests. Our results revealed a pronounced HFA in P. massoniana. P. massoniana litter decomposed faster in its home habitat by 40.6% in the litter layer and 10.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Akhil, Avirneni, Vikram Yogish, N. Sivarajan, et al. "Comparison between Dual Layer Intraperitoneal Mesh and Single Layer Mesh for Laparoscopic Ventral and Incisional Hernia Repair." Journal of Evolution of Medical and Dental Sciences 10, no. 25 (2021): 1871–75. http://dx.doi.org/10.14260/jemds/2021/387.

Texto completo da fonte

Resumo:

BACKGROUND A hernia is the abnormal exit of tissue or an organ, such as the bowel, through the wall of the cavity in which it normally resides. Hernias come in a variety of forms. The abdomen, specifically the groin, is most frequently involved. Incisional hernias and other ventral hernias are common surgical problems. A prosthetic mesh should always be used in ventral hernia repair (VHR). Now, the polypropylene mesh (PPM) has become the prosthetic mesh of choice in the repair of hernias, including inguinal hernia. Newer meshes are introduced, claiming lesser complication rate, but are invaria

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Rashid, Muhammad Harunur, Zahangir Alam, Firoz Mahmud, and M. S. Anita. "Durability and Performance of Ferrocement Infill Wall Panel." Civil Engineering Journal 5, no. 6 (2019): 1205–13. http://dx.doi.org/10.28991/cej-2019-03091325.

Texto completo da fonte

Resumo:

Ferrocement is composed of cement mortar reinforced with small diameter closely spaced steel wire mesh to form a thin section conforming high performance of serviceability. The present study investigates the performance of ferrocement panels focused on the mechanical properties, water absorption and durability. A series of specimens were cast with single and double mesh layers. Flexural performance was carried out following sixty days in temperature cycle and in corrosion cell. These results was compared with the controlled sample. The test results shows that the flexural strength performance

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Yao, Chuan Qin, Xue Bai, Rong Bai, Chao Wang, and Hai Bing Ma. "Research and Benefit Analysis on Exterior Mesh Construction Technology of Super Cross-Section CFST Cylinder." Advanced Materials Research 671-674 (March 2013): 2011–15. http://dx.doi.org/10.4028/www.scientific.net/amr.671-674.2011.

Texto completo da fonte

Resumo:

Based on the project on F2-4 plot of Pearl River New Town in Guangzhou City, manual plastering protective layer construction technology of exterior mesh for super cross-section CFST cylinder is fully studied in this paper, the proposed new technologies of outer tube mesh and dry mesh are qualified with fast construction, energy conservation and environmental protection, low cost for later maintenance and so on. The new technology has good prospects for development and can be promoted widely.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Mesh layer"

1

Panmin, Ye, and Yong. "Distributed Cross-layer Monitoring in Wireless Mesh Networks." Thesis, Karlstad University, Karlstad University, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4615.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Ye, Panming, and Yong Zhou. "Distributed Cross-layer Monitoring in Wireless Mesh Networks." Thesis, Karlstad University, Karlstad University, Karlstad University, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4617.

Texto completo da fonte

Resumo:

<p>Wireless mesh networks has rapid development over the last few years. However, due to properties such as distributed infrastructure and interference, which strongly affect the performance of wireless mesh networks, developing technology has to face the challenge of architecture and protocol design issues. Traditional layered protocols do not function efficiently in multi-hop wireless environments. To get deeper understanding on interaction of the layered protocols and optimize the performance of wireless mesh network, more recent researches are focusing on cross-layer measurement schemes an

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Mbayi, Charles K. "Efficient Variable Mesh Techniques to solve Interior Layer Problems." University of Western Cape, 2020. http://hdl.handle.net/11394/7324.

Texto completo da fonte

Resumo:

Philosophiae Doctor - PhD<br>Singularly perturbed problems have been studied extensively over the past few years from different perspectives. The recent research has focussed on the problems whose solutions possess interior layers. These interior layers appear in the interior of the domain, location of which is difficult to determine a-priori and hence making it difficult to investigate these problems analytically. This explains the need for approximation methods to gain some insight into the behaviour of the solution of such problems. Keeping this in mind, in this thesis we would like

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Dely, Peter. "Cross-Layer Optimization of Voice over IP in Wireless Mesh Networks." Licentiate thesis, Karlstads universitet, Avdelningen för datavetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-6280.

Texto completo da fonte

Resumo:

Wireless Mesh Networks (WMNs) have emerged as a promising network technology, which combines the benefits of cellular networks and Wireless Local Area Networks (WLANs). In a WMN mesh routers wirelessly relay traffic on behalf of other mesh routers or clients and thereby provide coverage areas comparable to cellular networks, while having the low complexity and low costs of WLANs. As Voice over IP (VoIP) is a very important Internet service, it is critical for the success of WMNs to support high quality VoIP. However, currentWMNs are not adapted well for VoIP. The capacity and scalability of si

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Porsch, Marco. "Layer 2 Path Selection Protocol for Wireless Mesh Networks with Smart Antennas." Master's thesis, Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-74743.

Texto completo da fonte

Resumo:

In this thesis the possibilities of smart antenna systems in wireless mesh networks are examined. With respect to the individual smart antenna tradeoffs, a routing protocol (Modified HWMP, MHWMP) for IEEE 802.11s mesh networks is presented, that exploits the full range of benefits provided by smart antennas: MHWMP actively switches between the PHY-layer transmission/reception modes (multiplexing, beamforming and diversity) according to the wireless channel conditions. Spatial multiplexing and beamforming are used for unicast data transmissions, while antenna diversity is employed for efficient

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Fahim, Rezaei Hamid. "Mesh-Bus, a double-layer coded, time-transparent digital distributed single-wire bus." Diss., University of Iowa, 2014. https://ir.uiowa.edu/etd/4626.

Texto completo da fonte

Resumo:

Medium access mechanisms are one of the most important aspects of buses, which are shared mediums. Almost all standard buses use Time Division Multiple Access (TDMA) as their medium access scheme. Such buses usually are multi-wire, very sensitive to time synchronization, and often managed by a master node. In this thesis, we develop new non-TDMA schemes for bus communications which are based on Code Division Multiple Access (CDMA), or Frequency Division Multiple Access (FDMA) that do not have the intrinsic limitations of traditional buses. The proposed schemes are based on a single wire bus se

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

RAMLI, MUHAMMAD. "NUMERICAL MODELING OF GROUNDWATER FLOW IN MULTI-LAYER AQUIFERS AT COASTAL ENVIRONMENT." 京都大学 (Kyoto University), 2009. http://hdl.handle.net/2433/77971.

Texto completo da fonte

Resumo:

Kyoto University (京都大学)<br>0048<br>新制・課程博士<br>博士(工学)<br>甲第14599号<br>工博第3067号<br>新制||工||1456(附属図書館)<br>26951<br>UT51-2009-D311<br>京都大学大学院工学研究科都市環境工学専攻<br>(主査)教授大西有三, 教授間瀬肇, 准教授西山哲<br>学位規則第4条第1項該当

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Ekman, Petter. "A Sensitivity Study of Some Numerical and Geometrical Parameters Affecting Lift." Thesis, Linköpings universitet, Mekanisk värmeteori och strömningslära, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-124197.

Texto completo da fonte

Resumo:

Volvo Car Corporation (VCC) uses Computational Fluid Dynamics (CFD) and wind tunnel during the aerodynamic development of new vehicles. In the past VCC main focus has been on the drag force correlation to the wind tunnel measurements but in recent years improved methods for lift force correlations has been highly wanted. Three objectives were considered in this study to improve the lift force correlation between the CFD simulations and wind tunnel measurements for geometrical configurations of the V60 and S60 models.Poor mesh resolution for the wall bounded flow existed for the VCC mesh method

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Amusa, Ebenezer Olukayode. "An enhanced cross-layer routing protocol for wireless mesh networks based on received signal strength." Thesis, University of Bedfordshire, 2010. http://hdl.handle.net/10547/143534.

Texto completo da fonte

Resumo:

The research work presents an enhanced cross-layer routing solution for Wireless Mesh Networks (WMN) based on Received Signal Strength. WMN is an emerging technology with varied applications due to inherent advantages ranging from self-organisation to auto-con guration. Routing in WMN is fundamen- tally achieved by hop counts which have been proven to be de cient in terms of network performance. The realistic need to enhance the link quality metric to improve network performance has been a growing concern in recent times. The cross-Layer routing approach is one of the identi ed methods of impr

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Skalli, Habiba. "Channel assignment, routing and cross layer issues for multi-radio multi-channel wireless mesh netorks." Thesis, IMT Alti Studi Lucca, 2009. http://e-theses.imtlucca.it/16/1/Skalli_phdtheis.pdf.

Texto completo da fonte

Resumo:

Next generation wireless mobile communications will be driven by converged networks that integrate disparate technologies and services. The Wireless Mesh Network (WMN) is envisaged to be one of the key components in the converged networks of the future, providing flexible, high-bandwidth wireless backhaul over large geographical areas. While single radio mesh nodes, operating on a single channel suffer from capacity constraints, equipping mesh routers with multiple radios using multiple non-overlapping channels can significantly alleviate the capacity problem and increase the aggregate bandwi

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Mesh layer"

1

G, Huang P., MacInnes J. M, and United States. National Aeronautics and Space Administration., eds. Mesh refinement in a two-dimensional large eddy simulation of a forced shear layer. National Aeronautics and Space Administration, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Sablone, Jonathan. The Madoff mess one year later. MCLE, 2010.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

National Aeronautics and Space Administration (NASA) Staff. Mesh Refinement in a Two-Dimensional Large Eddy Simulation of a Forced Shear Layer. Independently Published, 2018.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Mesh refinement in a two-dimensional large eddy simulation of a forced shear layer. National Aeronautics and Space Administration, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Mesh refinement in a two-dimensional large eddy simulation of a forced shear layer. National Aeronautics and Space Administration, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Publishing, Appreciation Gift. Don't Mess with Me Because I'm Lawyer: Lawyer Appreciation Gifts... . 6x9 , 120 Pages Lined Notebook / Journal , Great for Writing. Independently Published, 2020.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Loren, Emma. Don't Mess with Me, I Am a Floor Layer: 6X9 Career Pride 120 Pages Writing Notebooks. Independently Published, 2019.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

The End of the Whole Mess: And other stories. Simon & Schuster Audio, 2009.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Loren, Emma. Don't Mess with Me, I Am a Lawyer: 6X9 Career Pride 120 Pages Writing Notebooks. Independently Published, 2019.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Loren, Emma. Don't Mess with Me, I Am a Real Estate Lawyer: 6X9 Career Pride 120 Pages Writing Notebooks. Independently Published, 2020.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Capítulos de livros sobre o assunto "Mesh layer"

1

Zang, Hui. "Path-Protection Routing and Wavelength Assignment with Duct-Layer Constraints." In WDM Mesh Networks. Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-0341-5_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Jain, Rajeev, and Timothy J. Tautges. "PostBL: Post-mesh Boundary Layer Mesh Generation Tool." In Proceedings of the 22nd International Meshing Roundtable. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02335-9_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Loseille, Adrien, and Rainald Löhner. "Robust Boundary Layer Mesh Generation." In Proceedings of the 21st International Meshing Roundtable. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-33573-0_29.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Pathak, Parth H., and Rudra Dutta. "Mesh Design: Lower Layer Issues." In Designing for Network and Service Continuity in Wireless Mesh Networks. Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-4627-9_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Moxey, D., M. Hazan, S. J. Sherwin, and J. Peiro. "Curvilinear Mesh Generation for Boundary Layer Problems." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-12886-3_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

P.-Vaisband, Inna, Renatas Jakushokas, Mikhail Popovich, Andrey V. Mezhiba, Selçuk Köse, and Eby G. Friedman. "Effective Resistance in a Two Layer Mesh." In On-Chip Power Delivery and Management. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29395-0_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Heo, Woonkang, Mina Lee, Chohee Kim, and Minseok Oh. "Performance of a Forwarding Layer for Mesh Network." In Communication and Networking. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10844-0_56.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Li, Xiang, Yong-Jian Yang, Chun-Sheng Cui, and Guan-Nan Yang. "Cross-Layer Routing Metric for Wireless Mesh Networks." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34038-3_72.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Alauzet, F., and D. Marcum. "A Closed Advancing-Layer Method with Changing Topology Mesh Movement for Viscous Mesh Generation." In Proceedings of the 22nd International Meshing Roundtable. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02335-9_14.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Jia, Weijia, Wanqing Tu, and Jie Wu. "Hierarchical Multicast Tree Algorithms for Application Layer Mesh Networks." In Networking and Mobile Computing. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11534310_59.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Mesh layer"

1

Rana, Vikrant, Rashmi Sharma, Srinivasan Jayaraman, Karthik Venkatesan, Nandish Shivaprasad, and Ravi Mandliya. "An Evaluation of Cross-Layer Optimization scheme for Wireless Mesh Networks." In 2025 International Conference on Pervasive Computational Technologies (ICPCT). IEEE, 2025. https://doi.org/10.1109/icpct64145.2025.10939217.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Tsai, Tzu-Chieh, Sung-Ta Tsai, and Tsai-Feng Liu. "Cross-Layer Design for Multi-power, Multi-interface Routing in Wireless Mesh Networks." In 2009 Second International Conference on Advances in Mesh Networks (MESH). IEEE, 2009. http://dx.doi.org/10.1109/mesh.2009.27.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Singh, Jasmeet, and Carl F. Ollivier Gooch. "Advancing Layer Surface Mesh Generation." In AIAA Scitech 2020 Forum. American Institute of Aeronautics and Astronautics, 2020. http://dx.doi.org/10.2514/6.2020-0902.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Zhang, Hengwei, and Yao Xiao. "Numerical Simulation of Single-Layer Wire-Mesh Sensor." In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-93487.

Texto completo da fonte

Resumo:

Abstract Wire Mesh Sensor (WMS) is an advanced two-phase flow measurement device, which has been widely applied in experimental research and industrial production. Previous research has shown that the measurement uncertainty of the WMS increases with the increase of the axial distance between the two layers of the electrode wires. Moreover, the structure of dual layers of wire mesh limits the application of WMS in complex flow channels. For example, the structure of the rod bundle channel needs to be carefully designed to install WMS. Thus, a novel WMS with only a single layer of electrode mes

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Loseille, Adrien, and Rainald Löhner. "Boundary Layer Mesh Generation and Adaptivity." In 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-894.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Salleh, N. M., M. Muhammad, M. S. Zakaria, et al. "Wireless mesh networks: Cross layer design challenge!!" In 2007 Asia-Pacific Conference on Applied Electromagnetics (APACE). IEEE, 2007. http://dx.doi.org/10.1109/apace.2007.4603957.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Feuillet, Rémi, David Marcum, and Frederic Alauzet. "A closed advancing-layer method for generating curved boundary layer mesh." In AIAA Aviation 2019 Forum. American Institute of Aeronautics and Astronautics, 2019. http://dx.doi.org/10.2514/6.2019-3675.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Feuillet, Rémi, Adrien Loseille, David Marcum, and Frederic Alauzet. "Connectivity-change moving mesh methods for high-order meshes: Toward closed advancing-layer high-order boundary layer mesh generation." In 2018 Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics, 2018. http://dx.doi.org/10.2514/6.2018-4167.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Marcum, David L., Frederic Alauzet, and Adrien Loseille. "On a robust boundary layer mesh generation process." In 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics, 2017. http://dx.doi.org/10.2514/6.2017-0585.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Reddy, K. Ganesh, and P. Santhi Thilagam. "MAC layer security issues in wireless mesh networks." In ADVANCEMENT IN SCIENCE AND TECHNOLOGY: Proceedings of the 2nd International Conference on Communication Systems (ICCS-2015). AIP Publishing LLC, 2016. http://dx.doi.org/10.1063/1.4942710.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Mesh layer"

1

Wijaya, Ignasius P. A., Eric Kreiger, and Asuf Masud. An elastic-inelastic model and embedded bounce-back control for layered printing with cementitious materials. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48091.

Texto completo da fonte

Resumo:

This paper presents a finite-deformation model for extrusion-based layered printing with cementitious materials. The evolution of mechanical properties as the printed material cures and stiffens results in nonphysical reduction in the magnitude of elastic strains when standard constitutive models are employed. This elastic recovery of the printing induced deformation contradicts the experimentally observed behavior of the printed cementitious materials that harden at a nearly-frozen deformed state. A thermodynamically motivated constraint on the evolution of elastic strains is imposed on the c

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Berger, Rutherford C. Foundational Principles in the Development of AdH-SW3, the Three-Dimensional Shallow Water Hydrodynamics and Transport Module within the Adaptive Hydraulics/Hydrology Model. U.S. Army Engineer Research and Development Center, 2022. http://dx.doi.org/10.21079/11681/44560.

Texto completo da fonte

Resumo:

This report details the design and development of the three-dimensional shallow water hydrodynamics formulation within the Adaptive Hydraulics/Hydrology model (AdH-SW3) for simulation of flow and transport in rivers, estuaries, reservoirs, and other similar hydrologic environments. The report is intended to communicate principles of the model design for the interested and diligent user. The design relies upon several layers of consistency to produce a stable, accurate, and conservative model. The mesh design can handle rapid changes in bathymetry (e.g., steep-sided navigation channels in estua

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Cechinel, Clovis, and Joao Alberto Martins Rodrigues. ASSOCIATION OF DELIRIUM AND FRAGILITY IN HOSPITALIZED ELDERLY: SYSTEMATIC REVIEW. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2021. http://dx.doi.org/10.37766/inplasy2021.9.0022.

Texto completo da fonte

Resumo:

Review question / Objective: What is the relationship between delirium and frailty in hospitalized elderly people? The objective of this research is to analyze the association between frailty and delirium in hospitalized elderly people, through a systematic literature review. Condition being studied: Frailty and delirium in hospitalized aged. Information sources: A specific search strategy for the language of each database was developed using, initially, the Medical Subject Headings (MEsH) descriptor and later translated to specific descriptors (Descriptors in Health Sciences (DeCS) and Embase

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Davis, W. E., A. R. Olsen, B. T. Didier, P. E. Tucker, and D. W. Damschen. Surface footprint from initial Chernobyl release as indicated by the meso-alpha MLAM (Multi-Layer Air Mass) model. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5129048.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Yan, Yujie, and Jerome F. Hajjar. Automated Damage Assessment and Structural Modeling of Bridges with Visual Sensing Technology. Northeastern University, 2021. http://dx.doi.org/10.17760/d20410114.

Texto completo da fonte

Resumo:

Recent advances in visual sensing technology have gained much attention in the field of bridge inspection and management. Coupled with advanced robotic systems, state-of-the-art visual sensors can be used to obtain accurate documentation of bridges without the need for any special equipment or traffic closure. The captured visual sensor data can be post-processed to gather meaningful information for the bridge structures and hence to support bridge inspection and management. However, state-of-the-practice data postprocessing approaches require substantial manual operations, which can be time-c

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!