Conecte-se

Bibliografias temáticas / Silicon solar cells / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Silicon solar cells.

Artigos de revistas sobre o tema "Silicon solar cells"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 25 de julho de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Silicon solar cells".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Vlaskin, V. I. "Nanocrystalline silicon carbide films for solar cells." Semiconductor Physics Quantum Electronics and Optoelectronics 19, no. 3 (2016): 273–78. http://dx.doi.org/10.15407/spqeo19.03.273.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Wagner, P. "Silicon solar cells." Microelectronics Journal 19, no. 4 (1988): 37–50. http://dx.doi.org/10.1016/s0026-2692(88)80043-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Wenham, S. R., and M. A. Green. "Silicon solar cells." Progress in Photovoltaics: Research and Applications 4, no. 1 (1996): 3–33. http://dx.doi.org/10.1002/(sici)1099-159x(199601/02)4:1<3::aid-pip117>3.0.co;2-s.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Tordera, Daniel, and Henk J. Bolink. "Perovskite solar cells." Metode Science Studies Journal 15, no. 2 (2025): e28390. https://doi.org/10.7203/metode.15.28390.

Texto completo da fonte

Resumo:

At present, there is an urgent need to reduce greenhouse gas emissions to mitigate the climate change that threatens humanity and our planet’s ecosystems. A way to achieve this is by increasing renewable energy production, where solar photovoltaic plays a key role. However, the current commercial crystalline silicon photovoltaic technology might not be enough to achieve the required targets. In this work, we describe the latest advances of an emerging photovoltaic technology known as perovskites. In just ten years of development perovskite solar cells have matched the performance of current co

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Nie, Yuxuan, and Xintong Yu. "Structure affects perovskite/silicon solar cells." Highlights in Science, Engineering and Technology 13 (August 21, 2022): 68–74. http://dx.doi.org/10.54097/hset.v13i.1333.

Texto completo da fonte

Resumo:

Contemporarily, the power conversion efficiency of monolithic perovskite/silicon series solar cells has been significantly improved. Starting with the structure of solar cells, this paper discusses the reasons for the power growth of perovskite/silicon series solar cells. Subsequently, the main advantages of perovskite/silicon series solar cells are summarized. Afterwards, the bottlenecks and limitations encountered in the current state-of-art scenarios of solar cells are evaluated detailly, and future prospects for the further exploration are demonstrated. By comparing perovskite/silicon cell

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Tsakalakos, L., J. Balch, J. Fronheiser, B. A. Korevaar, O. Sulima, and J. Rand. "Silicon nanowire solar cells." Applied Physics Letters 91, no. 23 (2007): 233117. http://dx.doi.org/10.1063/1.2821113.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Hill, R. "Amorphous Silicon Solar Cells." Electronics and Power 32, no. 9 (1986): 680. http://dx.doi.org/10.1049/ep.1986.0402.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Galloni, Roberto. "Amorphous silicon solar cells." Renewable Energy 8, no. 1-4 (1996): 400–404. http://dx.doi.org/10.1016/0960-1481(96)88886-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Blakers, A. W., and T. Armour. "Flexible silicon solar cells." Solar Energy Materials and Solar Cells 93, no. 8 (2009): 1440–43. http://dx.doi.org/10.1016/j.solmat.2009.03.016.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Won, Rachel. "Graphene–silicon solar cells." Nature Photonics 4, no. 7 (2010): 411. http://dx.doi.org/10.1038/nphoton.2010.140.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Carlson, D. E. "Amorphous-silicon solar cells." IEEE Transactions on Electron Devices 36, no. 12 (1989): 2775–80. http://dx.doi.org/10.1109/16.40936.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Van Overstraeten, Roger. "Crystalline silicon solar cells." Renewable Energy 5, no. 1-4 (1994): 103–6. http://dx.doi.org/10.1016/0960-1481(94)90359-x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Rath, J. K. "Nanocystalline silicon solar cells." Applied Physics A 96, no. 1 (2008): 145–52. http://dx.doi.org/10.1007/s00339-008-5017-x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Fuhs, W. "Amorphous silicon solar cells." Solar & Wind Technology 4, no. 1 (1987): 7–15. http://dx.doi.org/10.1016/0741-983x(87)90003-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Carlson, D. E. "Amorphous silicon solar cells." Solar Cells 20, no. 1 (1987): 75–76. http://dx.doi.org/10.1016/0379-6787(87)90023-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Wang, Jiaming. "Comparison of development prospects between silicon solar cells and perovskite solar cells." Highlights in Science, Engineering and Technology 27 (December 27, 2022): 512–18. http://dx.doi.org/10.54097/hset.v27i.3808.

Texto completo da fonte

Resumo:

The development history, preparation process, structure and working principle of silicon solar cells and perovskite solar cells are introduced. The main parameters and production processes of the two kinds of solar cells are compared. The advantages and disadvantages of perovskite solar energy compared with existing solar cells in market application are analyzed and summarized, including good light absorption, high energy conversion efficiency and simple process flow, The problems of cost, size and stability of perovskite solar cells in market application are pointed out and the solutions are

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Zhang, Yunlong, Long Zhou, and Chunfu Zhang. "Research Progress of Semi-Transparent Perovskite and Four-Terminal Perovskite/Silicon Tandem Solar Cells." Energies 17, no. 8 (2024): 1833. http://dx.doi.org/10.3390/en17081833.

Texto completo da fonte

Resumo:

Perovskite/silicon tandem solar cells are of great interest due to their potential for breaking the Shockley-Queisser limit of single-junction silicon solar cells. Perovskite solar cells are widely used as the top subcells in perovskite/silicon tandem solar cells due to their high efficiency and lower fabrication cost. Herein, we review the semi-transparent perovskite solar cell in terms of the mechanisms of their translucent structure, transparent electrodes, charge transport layer, and component modification. In addition, recent progress in the research and development of 4T perovskite/silic

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Korkishko, R. M. "Analysis of features of recombination mechanisms in silicon solar cells." Semiconductor Physics Quantum Electronics and Optoelectronics 17, no. 1 (2014): 14–20. http://dx.doi.org/10.15407/spqeo17.01.014.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Barnett, Allen M., Robert B. Hall, and James A. Rand. "Thin Polycrystalline Silicon Solar Cells." MRS Bulletin 18, no. 10 (1993): 33–37. http://dx.doi.org/10.1557/s0883769400038264.

Texto completo da fonte

Resumo:

Solar cells formed with thin silicon active layers (<100 μm thick) offer advantages over thick ingot-based devices. The advantages come in two forms: the first is the potential for higher conversion efficiency than that of conventional thick devices, and the second is a reduction in material requirements. The use of thin polycrystalline silicon for solar cells offers the potential of capturing the high performance of crystalline silicon while achieving the potential low cost of thin films. Experimental and theoretical studies initially uncovered the issues of grain size and thickness as lim

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Kim, Sangmo, Van Quy Hoang, and Chung Wung Bark. "Silicon-Based Technologies for Flexible Photovoltaic (PV) Devices: From Basic Mechanism to Manufacturing Technologies." Nanomaterials 11, no. 11 (2021): 2944. http://dx.doi.org/10.3390/nano11112944.

Texto completo da fonte

Resumo:

Over the past few decades, silicon-based solar cells have been used in the photovoltaic (PV) industry because of the abundance of silicon material and the mature fabrication process. However, as more electrical devices with wearable and portable functions are required, silicon-based PV solar cells have been developed to create solar cells that are flexible, lightweight, and thin. Unlike flexible PV systems (inorganic and organic), the drawbacks of silicon-based solar cells are that they are difficult to fabricate as flexible solar cells. However, new technologies have emerged for flexible sola

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Huang, Yuan Ming, Qing Lan Ma, Ming Meng, and Bao Gai Zhai. "Porous Silicon Based Solar Cells." Materials Science Forum 663-665 (November 2010): 836–39. http://dx.doi.org/10.4028/www.scientific.net/msf.663-665.836.

Texto completo da fonte

Resumo:

The primary aim of this communication is to introduce a novel approach of preparation of solar cell, viz. PS based solar cell, which is on the basis of the basic principle of the well established photovoltaic effect. We carefully investigate the current-voltage characteristics of the PS-based solar cell by virtue of performing the measurement of both current and voltage of PS-based solar cell under the condition of the sunlight irradiation and priori to sunlight irradiation in the purpose of observing clearly the photovoltaic effect possessed by the PS based solar cell. Judging by the results

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Xue, Chun Rong, and Xia Yun Sun. "Design for Amorphous Silicon Solar Cells." Advanced Materials Research 750-752 (August 2013): 961–64. http://dx.doi.org/10.4028/www.scientific.net/amr.750-752.961.

Texto completo da fonte

Resumo:

This document explains and demonstrates how to design efficient amorphous silicon solar cells. Some of the fundamental physical concepts required to interpret the scientific literature about amorphous silicon are introduced. The principal methods such as plasma deposition that are used to make amorphous siliconbased solar cells are investigated. On the basis, high-efficiency solar cells based on amorphous silicon technology are designed. Multi-junction amorphous silicon solar cells are discussed, how these are made and how their performance can be understood and optimized. To conclude this doc

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Yang, Hong, He Wang, and Dingyue Cao. "Investigation of soldering for crystalline silicon solar cells." Soldering & Surface Mount Technology 28, no. 4 (2016): 222–26. http://dx.doi.org/10.1108/ssmt-04-2015-0015.

Texto completo da fonte

Resumo:

Purpose Tabbing and stringing are the critical process for crystalline silicon solar module production. Because of the mismatch of the thermal expansion coefficients between silicon and metal, phenomenon of cell bowing, microcracks formation or cell breakage emerge during the soldering process. The purpose of this paper is to investigate the effect of soldering on crystalline silicon solar cells and module, and reveal soldering law so as to decrease the breakage rates and improve reliability for crystalline silicon solar module. Design/methodology/approach A microscopic model of the soldering

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Li, Jian Gong, Peng Wu, Peng Yu, and Shu Ai Li. "Ribbon Silicon Material for Solar Cells." Advanced Materials Research 531 (June 2012): 67–70. http://dx.doi.org/10.4028/www.scientific.net/amr.531.67.

Texto completo da fonte

Resumo:

Solar cell is one of most important renewable energy. But now it is not be widely used because of its high cost compared with traditional resource. Ribbon silicon is one new low cost solar cell material avoiding ingot casting and slicing. It is a promising silicon wafer fabrication technology alternative to traditional ingot casting and slicing. Using ribbon silicon can make solar cell production cost greatly reduced. In this paper EFG, String Ribbon and a novel silicon wafer are discussed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Vishnu, tej Gunisati, and Suganesh Raghunathan. "A comparative study on silicon and perovskite solar cells." Technix international journal for engineeiring research 10, no. 6 (2023): 757–63. https://doi.org/10.5281/zenodo.8154877.

Texto completo da fonte

Resumo:

The aim of this article is to draw the attention of the reader to the current problems and limitations associated with crystalline silicon solar cells and how the perovskite solar cells are capable of overcoming the issues in efficiency and the production costs of crystalline solar cells. In the beginning of the article, we will first introduce various aspects of silicon solar cells i.e. the material introduction, method of manufacture of both crystalline silicon solar cells and perovskite solar cell. Then we explicate the advantages of the later by comparative analysis of both types of cells

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Ge, AnXu. "Design and process of perovskite/silicon tandem solar cells." Applied and Computational Engineering 24, no. 1 (2023): 134–38. http://dx.doi.org/10.54254/2755-2721/24/20230693.

Texto completo da fonte

Resumo:

At present, the solar cells that occupy most market are still silicon solar cells. However, the power conversion efficiencies (PCEs) of the devices made of silicon have achieved an extreme value. Therefore, a new type of solar cells to get higher power conversion efficiencies are in great need. Since the 21st century, perovskite/silicon tandem solar cells have gained great attention because of their potential to offer higher PCE compared with other traditional solar cells. This article elaborates the inevitability of the development of perovskite/silicon crystal tandem solar cells from the per

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Neuhaus, Dirk-Holger, and Adolf Münzer. "Industrial Silicon Wafer Solar Cells." Advances in OptoElectronics 2007 (April 13, 2007): 1–15. http://dx.doi.org/10.1155/2007/24521.

Texto completo da fonte

Resumo:

In 2006, around 86% of all wafer-based silicon solar cells were produced using screen printing to form the silver front and aluminium rear contacts and chemical vapour deposition to grow silicon nitride as the antireflection coating onto the front surface. This paper reviews this dominant solar cell technology looking into state-of-the-art equipment and corresponding processes for each process step. The main efficiency losses of this type of solar cell are analyzed to demonstrate the future efficiency potential of this technology. In research and development, more various advanced solar cell c

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Um, Han-Don, Kangmin Lee, Inchan Hwang, et al. "Progress in silicon microwire solar cells." Journal of Materials Chemistry A 8, no. 11 (2020): 5395–420. http://dx.doi.org/10.1039/c9ta12792e.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Cho, Eun-Chel, Sangwook Park, Xiaojing Hao, et al. "Silicon quantum dot/crystalline silicon solar cells." Nanotechnology 19, no. 24 (2008): 245201. http://dx.doi.org/10.1088/0957-4484/19/24/245201.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Yang, Hong, He Wang, and Minqiang Wang. "Investigation of the Relationship between Reverse Current of Crystalline Silicon Solar Cells and Conduction of Bypass Diode." International Journal of Photoenergy 2012 (2012): 1–5. http://dx.doi.org/10.1155/2012/357218.

Texto completo da fonte

Resumo:

In the process of crystalline silicon solar cells production, there exist some solar cells whose reverse current is larger than 1.0 A because of silicon materials and process. If such solar cells are encapsulated into solar modules, hot-spot phenomenon will emerge in use. In this paper, the effect of reverse current on reliability of crystalline silicon solar modules was investigated. Based on the experiments, considering the different shaded rate of cells, the relation between reverse current of crystalline silicon solar cells and conduction of bypass diode was investigated for the first time

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Chen, Qianyu, Long Zhou, Jiaojiao Zhang, et al. "Recent Progress of Wide Bandgap Perovskites towards Two-Terminal Perovskite/Silicon Tandem Solar Cells." Nanomaterials 14, no. 2 (2024): 202. http://dx.doi.org/10.3390/nano14020202.

Texto completo da fonte

Resumo:

Perovskite/silicon tandem solar cells have garnered considerable interest due to their potential to surpass the Shockley–Queisser limit of single-junction Si solar cells. The rapidly advanced efficiencies of perovskite/silicon tandem solar cells benefit from the significant improvements in perovskite technology. Beginning with the evolution of wide bandgap perovskite cells towards two-terminal (2T) perovskite/silicon tandem solar cells, this work concentrates on component engineering, additives, and interface modification of wide bandgap perovskite cells. Furthermore, the advancements in 2T pe

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Goswami, Romyani. "Three Generations of Solar Cells." Advanced Materials Research 1165 (July 23, 2021): 113–30. http://dx.doi.org/10.4028/www.scientific.net/amr.1165.113.

Texto completo da fonte

Resumo:

In photovoltaic system the major challenge is the cost reduction of the solar cell module to compete with those of conventional energy sources. Evolution of solar photovoltaic comprises of several generations through the last sixty years. The first generation solar cells were based on single crystal silicon and bulk polycrystalline Si wafers. The single crystal silicon solar cell has high material cost and the fabrication also requires very high energy. The second generation solar cells were based on thin film fabrication technology. Due to low temperature manufacturing process and less materi

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Wang, Enyu, He Wang, and Hong Yang. "Comparison of the Electrical Properties of PERC Approach Applied to Monocrystalline and Multicrystalline Silicon Solar Cells." International Journal of Photoenergy 2016 (2016): 1–6. http://dx.doi.org/10.1155/2016/8982376.

Texto completo da fonte

Resumo:

At present, the improvement in performance and the reduction of cost for crystalline silicon solar cells are a key for photovoltaic industry. Passivated emitter and rear cells are the most promising technology for next-generation commercial solar cells. The efficiency gains of passivated emitter and rear cells obtained on monocrystalline silicon wafer and multicrystalline silicon wafer are different. People are puzzled as to how to develop next-generation industrial cells. In this paper, both monocrystalline and multicrystalline silicon solar cells for commercial applications with passivated e

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Albrasia, Enteisar, and Fathia Mohhammed Essa Albrasi. "Solar cells and their use." International Journal of Applied Science and Research 05, no. 05 (2022): 27–33. http://dx.doi.org/10.56293/ijasr.2022.5428.

Texto completo da fonte

Resumo:

The sun's light is an unewable, renewable source of energy that is unaffected by environmental factors like noise and pollution. It is easily obtainable from the Earth's petroleum resources, natural gas, and other nonrenewable energy sources like coal. There were several stages of evolution in the composition of solar cells from one generation to the next. The silicon used in the early solar cells was largely produced as single crystals on silicon chips. Furthermore, advances in thin films the dye and organic solar cells improved the cell's efficiency. The inability to choose the best solar ce

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Aliyev, Rayimjon, Oybek Bozarov, Dilshod Kodirov, Jamshid Kaxxorov, and Dilnoza Xonbutayeva. "Study on photovoltaic characteristics of bifacial solar panels." E3S Web of Conferences 497 (2024): 01016. http://dx.doi.org/10.1051/e3sconf/202449701016.

Texto completo da fonte

Resumo:

In the work optimum angles of orientation of solar panels with bifacial silicon solar cell, essentially different from traditional solar panels with simple silicon solar cells are experimentally defined. Are shown optimum distance from a back vertical wall and height from horizon, and also color of a horizontal surface reflecting them for achievement of high efficiency of solar panels with bifacial solar cells. Temperature factors of the main basic photovoltaic parameters of power stations with simple and bifacial silicon solar cells shown. Advantage of use of photovoltaic power stations with

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Shukla, Naman, Anil Kumar Verma, and Sanjay Tiwari. "Optimization of Efficient Perovskite-Si Hybrid Tandem Solar Cells." Material Science Research India 20, no. 1 (2023): 25–40. http://dx.doi.org/10.13005/msri/200104.

Texto completo da fonte

Resumo:

Perovskite-silicon tandem solar cells have attracted much attention to photovoltaic community because of their high efficiency via easy fabrication methods and availability of precursor material abundant in nature. The properties of both perovskite and silicon meet ideal solar cell standards such as high light absorption potential, long carrier diffusion length and fast charge separation process. Semi-transparent solar cell with widely tunable band gap of perovskite material is compatible with silicon solar cell for tandem structures. A perovskite-silicon tandem solar cell four terminal config

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Beaucarne, Guy. "Silicon Thin-Film Solar Cells." Advances in OptoElectronics 2007 (December 17, 2007): 1–12. http://dx.doi.org/10.1155/2007/36970.

Texto completo da fonte

Resumo:

We review the field of thin-film silicon solar cells with an active layer thickness of a few micrometers. These technologies can potentially lead to low cost through lower material costs than conventional modules, but do not suffer from some critical drawbacks of other thin-film technologies, such as limited supply of basic materials or toxicity of the components. Amorphous Si technology is the oldest and best established thin-film silicon technology. Amorphous silicon is deposited at low temperature with plasma-enhanced chemical vapor deposition (PECVD). In spite of the fundamental limitation

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Wang, Ying Lian, and Jun Yao Ye. "Review and Development of Crystalline Silicon Solar Cell with Intelligent Materials." Advanced Materials Research 321 (August 2011): 196–99. http://dx.doi.org/10.4028/www.scientific.net/amr.321.196.

Texto completo da fonte

Resumo:

The application of solar cell has offered human society renewable clean energy. As intelligent materials, crystalline silicon solar cells occupy absolutely dominant position in photovoltaic market, and this position will not change for a long time in the future. Thereby increasing the efficiency of crystalline silicon solar cells, reducing production costs and making crystalline silicon solar cells competitive with conventional energy sources become the subject of today's PV market. The working theory of solar cell was introduced. The developing progress and the future development of mono-crys

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Peng, Qichen. "Materials and Prospects of Novel Solar Cells." E3S Web of Conferences 424 (2023): 04016. http://dx.doi.org/10.1051/e3sconf/202342404016.

Texto completo da fonte

Resumo:

As industrial standards continue to grow, the demand for traditional energy sources is on the rise, the solar energy is clean and non-polluting, renewable energy sources. Solar cells are devices that can convert sunlight directly into electricity. Solar cells have progressively established themselves as a research hotspot sought after by scholars in recent years. This paper summarizes the device structure, principle, development status and problems faced by the traditional silicon crystal solar cells and novel solar cells. In addition, this paper also compares the cost, advantages and disadvan

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Watanabe, Hiroyuki. "Overview of Cast Multicrystalline Silicon Solar Cells." MRS Bulletin 18, no. 10 (1993): 29–32. http://dx.doi.org/10.1557/s0883769400038252.

Texto completo da fonte

Resumo:

Worldwide environmental problems such as the greenhouse effect and acid rain have been caused by the human race's continuous reliance on the combustion of petroleum for fuel.Solar energy, which is clean and practically unlimited, is expected to be a desirable alternate energy source to conventional power supplies, and demand for the photovoltaic system has increased throughout the world, especially in Europe and the United States.Photovoltaic cells are probably the most effective method for capturing solar energy, since they are easy to use and are the most effective means of directly generati

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Bazer-Bachi, Barbara, Pierre Saint-Cast, Jorge Posada, et al. "Assessing the potential of TOPCon solar cells architecture using industrial n-type cast-mono silicon material." EPJ Photovoltaics 15 (2024): 16. http://dx.doi.org/10.1051/epjpv/2024016.

Texto completo da fonte

Resumo:

Cast-mono silicon material is interesting for its lower carbon footprint compared to Czochralski (Cz) monocrystalline silicon. However, solar cells fabricated using cast-mono (CM) silicon show lower performances. In this work, two routes to make cast-mono silicon advantageous over Cz silicon are considered. The first route is to further reduce carbon footprint of cast-mono silicon, by using Upgraded Metallurgical Grade silicon (UMG-Si) feedstock instead of Solar Grade silicon (SoG-Si) feedstock. TOPCon solar cells are fabricated using both feedstocks, and cast-mono growth technology, using ind

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

Chuchvaga, Nikolay, Kairat Zholdybayev, Kazybek Aimaganbetov, Sultan Zhantuarov, and Abay Serikkanov. "Development of Hetero-Junction Silicon Solar Cells with Intrinsic Thin Layer: A Review." Coatings 13, no. 4 (2023): 796. http://dx.doi.org/10.3390/coatings13040796.

Texto completo da fonte

Resumo:

This paper presents the history of the development of heterojunction silicon solar cells from the first studies of the amorphous silicon/crystalline silicon junction to the creation of HJT solar cells with novel structure and contact grid designs. In addition to explanation of the current advances in the field of research of this type of solar cells, the purpose of this paper is to show possible ways to improve the structure of the amorphous silicon/crystalline silicon-based solar cells for further improvement of the optical and electrical parameters of the devices by using of numerical simula

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Jheng, Wern Dare, Shao Hsien Chen, and Zhi Hong Lin. "The Photoelectric Conversion Efficiency Research at Color Solar Cell." Applied Mechanics and Materials 121-126 (October 2011): 2989–93. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.2989.

Texto completo da fonte

Resumo:

When the petrochemical raw materials continue to rise, resulting in the demand for solar power to increase 25-30% annually. So solar power is currently the most practical and efficient best alternative energy sources. silicon solar cells is now the main raw material, which can be divided into: single-crystal silicon, polycrystalline silicon and amorphous silicon. The most efficiency is single crystal silicon solar cells, polycrystalline silicon solar cells yield larger and more expensive, amorphous silicon solar cell has the lowest price but the worst efficiency. Solar module packaging can pro

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Zhao, Zengchao, Bingye Zhang, Ping Li, Wan Guo, and Aimin Liu. "Effective Passivation of Large Area Black Silicon Solar Cells bySiO2/SiNx:H Stacks." International Journal of Photoenergy 2014 (2014): 1–6. http://dx.doi.org/10.1155/2014/683654.

Texto completo da fonte

Resumo:

The performance of black silicon solar cells with various passivation films was characterized. Large area (156×156 mm2) black silicon was prepared by silver-nanoparticle-assisted etching on pyramidal silicon wafer. The conversion efficiency of black silicon solar cell without passivation is 13.8%. For the SiO2andSiNx:H passivation, the conversion efficiency of black silicon solar cells increases to 16.1% and 16.5%, respectively. Compared to the single film of surface passivation of black silicon solar cells, the SiO2/SiNx:H stacks exhibit the highest efficiency of 17.1%. The investigation of i

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Ismailov K.A., Kenzhaev Z.T., Koveshnikov S.V., Kosbergenov E. Zh., and Ismaylov B.K. "Radiation resistance of nickel-doped silicon solar cells." Physics of the Solid State 64, no. 5 (2022): 513. http://dx.doi.org/10.21883/pss.2022.05.53509.253.

Texto completo da fonte

Resumo:

The influence of nickel doping on the radiation resistance of silicon solar cells in the range of γ-irradiation doses of 10^5-108 rad was studied. It is shown that diffusion doping of silicon with impurity nickel atoms increases the radiation resistance of the parameters of silicon solar cells. It is assumed that the reason for the increase in the radiation resistance of such solar cells is the existence of clusters of impurity nickel atoms, which serve as sinks for radiation defects. Keywords: silicon, γ-irradiation, nickel, cluster, solar cell.

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Himer, Sarah El, and Ali Ahaitouf. "Improvement of Optical Performances Using the Hybrid CPV." Journal of Daylighting 7, no. 2 (2020): 238–45. http://dx.doi.org/10.15627/jd.2020.20.

Texto completo da fonte

Resumo:

Hybrid Concentrated Photovoltaics (HCPVs) are systems in which additional low-cost silicone solar cells are added to take advantage of the power generated by the diffuse radiation lost when using only multi-junction cells that work only with direct radiation. The work has been tested by simulating the performance of a hybrid CPV system composed of a Fresnel lens associated with a pyramid, multi junction cell as well as additional silicon solar cells. This proposal is compared with an ordinary CPV system and a system based on only silicon solar cells. The simulation results show that the CPV ma

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

JU, Minkyu, Seyoun KIM, Sangho KIM, Youngkuk KIM, Eun-Chel CHO, and Junsin YI. "High Efficiency Silicon Solar Cells." Physics and High Technology 28, no. 5 (2019): 2–6. http://dx.doi.org/10.3938/phit.28.016.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Martinelli, G. "Crystalline Silicon for Solar Cells." Solid State Phenomena 32-33 (December 1993): 21–26. http://dx.doi.org/10.4028/www.scientific.net/ssp.32-33.21.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Möller, Hans Joachim. "Multicrystalline Silicon for Solar Cells." Solid State Phenomena 47-48 (July 1995): 127–42. http://dx.doi.org/10.4028/www.scientific.net/ssp.47-48.127.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Kittler, Martin, and Wolfgang Koch. "Crystalline Silicon for Solar Cells." Solid State Phenomena 82-84 (November 2001): 695–700. http://dx.doi.org/10.4028/www.scientific.net/ssp.82-84.695.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!