Bibliografias temáticas / Smooth texture

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Smooth texture"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 1 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Smooth texture".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Smooth texture"

Lluscà, Marta, Aldrin Antony, and Joan Bertomeu. "Growth and Properties of ZnO:Al on Textured Glass for Thin Film Solar Cells." International Journal of Photoenergy 2014 (2014): 1–10. http://dx.doi.org/10.1155/2014/406495.

Texto completo da fonte

Resumo:

Aluminium induced texturing (AIT) method has been used to texture glass substrates in order to enhance the photon absorption in thin film solar cells. The resultant glass roughness has been analyzed by varying the AIT process parameters and it has been found that the deposition method of Al is a decisive factor in tuning the texture. Two types of textures, a soft (texture E) and a rough texture (texture S), were achieved from the thermally evaporated and sputtered Al layers through AIT process. Aluminium-doped zinc oxide (AZO) layers of different thickness were deposited over both textures and

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cadoret, G., and A. M. Smith. "Friction, not texture, dictates grip forces used during object manipulation." Journal of Neurophysiology 75, no. 5 (May 1, 1996): 1963–69. http://dx.doi.org/10.1152/jn.1996.75.5.1963.

Texto completo da fonte

Resumo:

1. Three men and seven women, 25-40 yr of age, were asked to use the thumb and index fingers to grasp, lift, and hold the armature of a linear motor generating a 2.0-N opposing force (simulating an object weighing approximately 200 g) for 2 s. The surface in contact with the fingers was composed of smooth or polyamide plastic etched with 1.0-mm high Braille beads separated at 2.0- or 3.0-mm intervals measured from apex to apex. The surfaces were left either untreated or coated with talc, water, or sucrose films designed to change the coefficient of friction with the skin. Talc reduced the coef

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ardani, Ahmad. "Portland Cement Concrete Pavement Texturing Methods." Transportation Research Record: Journal of the Transportation Research Board 1544, no. 1 (January 1996): 17–23. http://dx.doi.org/10.1177/0361198196154400103.

Texto completo da fonte

Resumo:

The testing and construction details of nine test sections with varying textural characteristics are described. The effects of the textures on the frictional and noise characteristics of the pavement surface were examined. Skid numbers were acquired according to ASTM E274 with ribbed and smooth tires at 65, 80, and 105 km/hr for all sections. Six types of texture-measuring devices were used to measure and compare the amount of texture in each section. To examine the noise properties of the test sections, noise data were required in three locations: inside the vehicle, 25 ft from the centerline

Estilos ABNT, Harvard, Vancouver, APA, etc.

Merriman, T., and J. Kannel. "Analyses of the Role of Surface Roughness on Contact Stresses Between Elastic Cylinders With and Without Soft Surface Coating." Journal of Tribology 111, no. 1 (January 1, 1989): 87–94. http://dx.doi.org/10.1115/1.3261883.

Texto completo da fonte

Resumo:

The paper presents a theory for contact stresses between a smooth and rough elastic cylinder. Three types of primary surface textures are considered: a peaked surface texture, a normal surface texture, and a grooved surface texture. The predicted contact stresses between a smooth and a rough surface are considerably higher than would be predicted by Hertz theory for smooth contact. In addition, when the rough surface has high peak asperities the contact stresses are higher than when the rough surface is grooved even though the average roughness is the same. A soft layer on the smooth surface c

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zhang, Zixin, Zhuangzhuang Chu, and Xuli Zhu. "Frictional effect of spherical convex textured rigid bodies sliding on smooth PDMS." E3S Web of Conferences 145 (2020): 02055. http://dx.doi.org/10.1051/e3sconf/202014502055.

Texto completo da fonte

Resumo:

Surface texturing was applied to flexible friction couples to improve their tribological behavior. Spherical convex texture was fabricated on the surface of photosensitive resin by stereolithography (SLA), the friction coefficient between the textured resin sample and smooth polydimethylsiloxane (PDMS) under the conditions of low sliding speed and dry friction was measured using a self-made frictional test bench. It was found that surface texture is capable of reducing friction at low applied normal load compared with the non textured friction couple, as well as increasing friction at high loa

Estilos ABNT, Harvard, Vancouver, APA, etc.

Carney, Elizabeth, Kameron Moding, Susan Johnson, and Jennifer Fisher. "Effects of Texture on Vegetable Acceptance During Infancy and Toddlerhood." Current Developments in Nutrition 4, Supplement_2 (May 29, 2020): 952. http://dx.doi.org/10.1093/cdn/nzaa054_024.

Texto completo da fonte

Resumo:

Abstract Objectives Limited evidence suggests that the timing of introduction to food texture may be important for early food acceptance patterns, but little is known about developmental shifts in children's acceptance of varying textures. Methods This research evaluated acceptance of varying textures of a single vegetable among children (n = 57, 46% female, 86% black) aged 6–11 months (n = 13), 12–23 months (n = 29), and 24–36 months (n = 15). Caregivers were videotaped feeding their child 4 different textures of potatoes (smooth puree, lumpy puree, diced, large pieces (i.e., French Fries) in

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wang, Guodong, Zhenkuan Pan, Qian Dong, Ximei Zhao, Zhimei Zhang, and Jinming Duan. "Unsupervised Texture Segmentation Using Active Contour Model and Oscillating Information." Journal of Applied Mathematics 2014 (2014): 1–11. http://dx.doi.org/10.1155/2014/614613.

Texto completo da fonte

Resumo:

Textures often occur in real-world images and may cause considerable difficulties in image segmentation. In order to segment texture images, we propose a new segmentation model that combines image decomposition model and active contour model. The former model is capable of decomposing structural and oscillating components separately from texture image, and the latter model can be used to provide smooth segmentation contour. In detail, we just replace the data term of piecewise constant/smooth approximation in CCV (convex Chan-Vese) model with that of image decomposition model-VO (Vese-Osher).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zhang, Na, Fazhan Yang, Fulin Jiang, and Guohua Liu. "Study of the effect of surface laser texture on tribological properties of cemented carbide materials." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, no. 6-7 (January 30, 2020): 993–1006. http://dx.doi.org/10.1177/0954405419896116.

Texto completo da fonte

Resumo:

Surface texturing has become a potential method to obtain a low friction coefficient under dry/lubricated conditions for different mechanical product surfaces. The mechanism of friction and wear reduction from a micro-texture on the surface of cemented carbide cutting tools was investigated by dry cutting a titanium alloy. Three kinds of micro-textures, namely, line, sinusoidal and rhombic grooves, with different area occupancy rates were produced by a laser on the cemented carbide surface. Experiments and finite element simulation of ABAQUS were used to investigate the tribological characteri

Estilos ABNT, Harvard, Vancouver, APA, etc.

Tong, Xin, Shucai Yang, Xianli Liu, Weiwei Liu, and Chunsheng He. "Friction, wear, and fatigue analysis for micro-textured cemented carbide." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 17 (July 10, 2019): 5989–6004. http://dx.doi.org/10.1177/0954406219862588.

Texto completo da fonte

Resumo:

In the research regarding laser-processed micro-textured carbide tool surfaces, there remains a lack of research on the relationship between micro-textured preparation processes and the degree of fatigue wear experienced by micro-textured surfaces. To study the effect of a laser-textured surface on the friction and wear properties of friction pairs, it first of all conducted friction and wear tests to obtain optimal processing parameters. By using a scanning electron microscope, the fatigue wear mechanism for a micro-textured surface was observed. Experimental results based on fatigue wear the

Estilos ABNT, Harvard, Vancouver, APA, etc.

Du, Hongwei, Yunfeng Zhang, Fangxun Bao, Ping Wang, and Caiming Zhang. "A Texture Preserving Image Interpolation Algorithm Based on Rational Function." International Journal of Multimedia Data Engineering and Management 9, no. 2 (April 2018): 36–56. http://dx.doi.org/10.4018/ijmdem.2018040103.

Texto completo da fonte

Resumo:

In this article, a type of bivariate rational interpolation function is constructed for preserving image texture structure, which integrates polynomial functions with a rational function. On the basis of this model, an image interpolation algorithm for texture preserving is proposed. First, an isoline method is employed to detect the image texture, and then the image can be divided into texture regions and smooth regions adaptively. Second, the smooth region and the textured region are interpolated by the polynomial model and the rational model, respectively. Finally, in order to preserve imag

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Smooth texture"

Ben, Ali Imed Eddine. "Wetting, Adhesion and friction investigations of hetero-chemical smooth patterned surfaces." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSE1250/document.

Texto completo da fonte

Resumo:

Les surfaces texturées sont devenues, ces dernières années, des substrats de choix pour de nombreuses applications. En effet, la texturation des surfaces, de l'échelle nanométrique à l'échelle microscopique, permet d'accroître les propriétés d'adhérence ou de renforcer la résistance mécanique intrinsèque. Dans ce travail de thèse nous proposons une étude sur l'influence des textures chimiques sur le comportement tribologique, adhésif et sur la mouillabilité des substrats. Dans le premier chapitre, on propose une stratégie de micro-texturation des surfaces basées sur la technique de microcontac

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chang, Jason Ph D. Massachusetts Institute of Technology. "Extracting orientation and scale from smoothly varying textures with application to segmentation." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/55147.

Texto completo da fonte

Resumo:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 109-112).<br>The work in this thesis focuses on two main computer vision research topic: image segmentation and texture modeling. Information theoretic measures have been applied to image segmentation algorithms for the past decade. In previous work, common measures such as mutual information or J divergence have been used. Algorithms typically differ by the measure they use and the features they us

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gallardo, Mathias. "Contributions to Monocular Deformable 3D Reconstruction : Curvilinear Objects and Multiple Visual Cues." Thesis, Université Clermont Auvergne‎ (2017-2020), 2018. http://www.theses.fr/2018CLFAC021/document.

Texto completo da fonte

Resumo:

La reconstruction 3D monoculaire déformable est le problème général d'estimation de forme 3D d'un objet déformable à partir d'images 2D. Plusieurs scénarios ont émergé : le Shape-from-Template (SfT) et le Non-Rigid Structure-from-Motion (NRSfM) sont deux approches qui ont été grandement étudiées pour leur applicabilité. La première utilise une seule image qui montre un objet se déformant et un patron (une forme 3D texturée de l'objet dans une pose de référence). La seconde n'utilise pas de patron, mais utilise plusieurs images et estime la forme 3D dans chaque image. Les deux approches s'appui

Estilos ABNT, Harvard, Vancouver, APA, etc.

Vaikuntanathan, Visakh. "Experimental and Theoretical Studies of Liquid Drop Impact on Solid Surfaces Comprising Smooth and Texture Portions." Thesis, 2015. http://etd.iisc.ernet.in/2005/3939.

Texto completo da fonte

Resumo:

Solid surfaces featuring a spatial variation of surface wettability along particular directions on their surface, referred to as wettability gradient surfaces, are becoming increasingly important in practical applications such as enhancement of boiling and condensation heat transfer and separation of immiscible liquids in smart micro-fluidic devices. With the aid of an external energy input, such as mechanical vibration or impact kinetic energy, a liquid drop on such surfaces gets propelled towards more wettable region on the surface. A fundamental study of impact dynamics of liquid drops on

Estilos ABNT, Harvard, Vancouver, APA, etc.

(8333136), Mohammed D. Aldosari. "Mobile LiDAR for Monitoring MSE Walls with Smooth and Textured Precast Concrete Panels." Thesis, 2020.

Encontre o texto completo da fonte

Resumo:

Mechanically Stabilized Earth (MSE) walls retain soil on steep, unstable slopes with crest loads. Over the last decade, they are becoming quite popular due to their low cost-to-benefit ratio, design flexibility, and ease of construction. Like any civil infrastructure, MSE walls need to be continuously monitored according to transportation asset management criteria during and after the construction stage to ensure that their expected serviceability measures are met and to detect design and/or construction issues, which could lead to structural failure. Current approaches for monitoring MSE wall

Estilos ABNT, Harvard, Vancouver, APA, etc.

Livros sobre o assunto "Smooth texture"

Bentley, Joyce. Smooth. North Mankato, MN: Chrysalis Education, 2005.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Michele, Tracey. Rough and smooth. North Mankato, Minn: Smart Apple Media, 2006.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Smooth or rough. Chicago, Ill: Heinemann Library, 2008.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dawson, Emily C. Rough and smooth. Mankato, Minnesota: Amicus, 2012.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dawson, Emily C. Rough and smooth. Mankato, Minnesota: Amicus, 2012.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Rough or smooth. Chicago: Raintree, 2005.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Brocket, Jane. Spiky, Slimy, Smooth: What Is Texture? Lerner Publishing Group, 2011.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Brocket, Jane. Spiky, Slimy, Smooth: What Is Texture? Lerner Publishing Group, 2010.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Spiky Slimy Smooth What Is Texture. Millbrook Press, 2011.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Little Nippers: Is It - Rough or Smooth (Little Nippers). Heinemann Library, 2004.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Smooth texture"

Gårding, Jonas. "Shape from texture for smooth curved surfaces." In Computer Vision — ECCV'92, 630–38. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/3-540-55426-2_67.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Shaila, S. G., and A. Vadivel. "Smooth Weighted Colour Histogram Using Human Visual Perception for Content-Based Image Retrieval Applications." In Textual and Visual Information Retrieval using Query Refinement and Pattern Analysis, 77–92. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2559-5_4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

"smooth texture." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 1257. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_194784.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

"Texture image segmentation with smooth gradients and local information." In Computational Modelling of Objects Represented in Images III, 137–42. CRC Press, 2012. http://dx.doi.org/10.1201/b12753-28.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Probert Smith, Penelope. "Smooth and Rough Target Modelling: Examples in Mapping and Texture Classification." In World Scientific Series in Robotics and Intelligent Systems, 61–78. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811141_0005.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Keefer, Robert F. "Physical Properties of Soils." In Handbook of Soils for Landscape Architects. Oxford University Press, 1999. http://dx.doi.org/10.1093/oso/9780195121025.003.0006.

Texto completo da fonte

Resumo:

Soil texture can be defined as the size and proportion of the soil particles—sand, silt, and clay—that are present in a soil. . . . Sand is the largest—from 0.05 to 2mm—and considered coarse texture; consists of angular spheres or cubes. Silt is intermediate—from 0.002 to 0.05mm—and considered medium texture; consists of properties between sand and clay. Clay is the smallest, being less than 0.002mm, and considered fine texture; appears as plate-like or flakes. . . . Any individual soil can be placed on the soil textural diagram when relative amounts of sand, silt, and clay are specified. As a general rule, the type of soil can be determined by feel when squeezed between the fingers. If the soil feels harsh and gritty it would be classified as a sandy soil. One that feels smooth and not sticky or plastic would be a silt soil, and one that is sticky or plastic would be a clay. Another way to distinguish between soils is their ability to form a ribbon. Soils that will not form a ribbon are sands. Those that form a fragile ribbon are loams; those that easily form a thick ribbon are clay loams; and those that easily form a long, thin, flexible ribbon are clays. . . . To be classified a sand, the soil must have more than 45% sand. To be classified a clay, the soil must have more than 20% clay. Loam is a mixture of sand, silt, and clay in about equal proportions. It is considered “ideal” for growing plants. . . . Weight of the soil solids is called “particle density.” For most common mineral soils (soils in which organic matter is usually less than 20%), particle density is about 2.65 g/cm3. Organic soils (where organic matter is greater than 20%) are usually about half as heavy, with particle density between 1.1 to 1.4 g/cm3. This measurement would be an important factor to consider if much material was to be transported for topsoiling.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Purves, Alex. "Rough Reading." In Experience, Narrative, and Criticism in Ancient Greece, 172–87. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198848295.003.0009.

Texto completo da fonte

Resumo:

This chapter argues that reading is portrayed in Dionysius of Halicarnassus, Ps.-Demetrius, and Ps.-Longinus as an experiential process dependent upon the smooth or rough quality of both objects and words. It focuses on two material surfaces which recur in ancient descriptions of Homer’s austere method of composition—first wool, which is tangled, unworked, and a mix of the material and ethereal; then stone, whose unhewn surface slows down and burdens the hands of Polyphemus and Sisyphus in the Odyssey. Drawing on the work of both Herder and Shklovsky on aesthetic perception, the chapter argues for an ancient understanding of reading based on a haptic model of contemplation, wherein a word’s weight or texture mimetically and temporally interacts with the events being narrated.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Burden, Mark. "Editing Shadows." In Textual Transformations, 173–91. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198808817.003.0010.

Texto completo da fonte

Resumo:

Since its first publication in 1806, Lucy Hutchinson’s Memoirs of the Life of Colonel Hutchinson has been praised for its sensitive political analysis and its literary excellence. However, both these features are editorial constructions which conceal aspects of the text’s revolutionary energy and smooth over its syntactical rough edges. The beginnings of this process may be viewed in the manuscript annotations of Hutchinson’s nephew, the text’s early custodian, whose response to the growing tide of anti-regicide literature was to conceal his aunt’s republican writings from public view. The main responsibility for reshaping Hutchinson’s prose and injecting a Whiggish flavour into the text was Julius Hutchinson the younger, the text’s first editor. His work formed the basis of all nineteenth-century editions, but eventually led to a bifurcation in Hutchinson scholarship between those who emphasized the text’s feminine literary qualities, and those who questioned its authority as a historical record.

Estilos ABNT, Harvard, Vancouver, APA, etc.

"Summary and Discussion." In Advances in Linguistics and Communication Studies, 134–49. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-6344-0.ch006.

Texto completo da fonte

Resumo:

The book developed an approach to interviewing that takes, as its point of reference, a functional communication theory and uses some of its units for conceptualizing interviewing practices in terms of canonical genres and textual strategies. Planning interview protocols now involves a process of assigning canonical genres to the candidate questions. During the interview process, enactment practices facilitate the smooth enactment of the interview and aids interviewers in reflecting and learning in both static and go-along interviews. In the final chapter, the argument and findings of the book are summarized and future research directions for this approach to interviews and interviewing are suggested. The domains of interest in the book have been related to organizations and business. Potential future applications are suggested that involve the storing, processing and manipulation of interview texts and the searching and retrieval of generically coded segments that can benefit knowledge and experience management in organizations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Graumann, Thomas. "The Structure and Elements of the ‘Ideal’ Session-Record and the Role of ‘Editing’." In The Acts of the Early Church Councils, 257–62. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198868170.003.0016.

Texto completo da fonte

Resumo:

Summarizing the findings of the previous chapters, this chapter sketches what might be considered an ideal type of a conciliar session protocol, as it starts with a conventional frame giving date and place and elucidation of the occasion, then progresses through the agenda and culminates in the recording of the oral verdicts of the bishops, concluding with the written formulization in a verdict signed by them. The protocol of the much-criticized Council of Ephesus (449) paradoxically comes very close to this ideal, when taken on its own terms. The seeming contradiction between this document’s smooth formality and the alleged tyrannical manipulations of the meeting it portrays alerts us to the role of a deeper editing, here and generally, by which the records were made to match the designs and self-image of both ecclesiastical and civil authorities, and which cannot be entirely captured by the attention to the textual processes required for their production alone.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Smooth texture"

Nguyen, Thanh Tuan, Thanh Phuong Nguyen, and Frederic Bouchara. "Smooth-Invariant Gaussian Features for Dynamic Texture Recognition." In 2019 IEEE International Conference on Image Processing (ICIP). IEEE, 2019. http://dx.doi.org/10.1109/icip.2019.8803449.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chung, Yu-Min, Michael Hull, and Austin Lawson. "Smooth Summaries of Persistence Diagrams and Texture Classification." In 2020 IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops (CVPRW). IEEE, 2020. http://dx.doi.org/10.1109/cvprw50498.2020.00428.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Watson, Cori, Wisher Paudel, Houston G. Wood, and Brian K. Weaver. "Quantifying the Linearity of the Fluid Dynamics for Noncontacting Annular Seals." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66804.

Texto completo da fonte

Resumo:

Non-contacting annular seals are used in turbomachinery to reduce the leakage of working fluid. The leakage is caused by a pressure differential across the seal and is reduced through textures cut into the surface of the seal. Three common types of non-contacting annular seals are labyrinth seals, hole-pattern seals, and helical groove seals. Labyrinth seals have circumferentially cut grooves as their surface texture. Helical groove seals have continuously cut grooves following a helical path along the surface. Hole-pattern seals have holes patterned across the surface. Each surface texture ca

Estilos ABNT, Harvard, Vancouver, APA, etc.

Starck, Jean-Luc, Mikael Elad, and David L. Donoho. "Image decomposition: separation of texture from piecewise smooth content." In Optical Science and Technology, SPIE's 48th Annual Meeting, edited by Michael A. Unser, Akram Aldroubi, and Andrew F. Laine. SPIE, 2003. http://dx.doi.org/10.1117/12.507447.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Larsen-Basse, Jorn, Lewis Ives, and Stephen M. Hsu. "Boundary Lubricated Friction Experiments With Coarse Surface Texture." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63355.

Texto completo da fonte

Resumo:

Low-speed friction experiments were conducted under boundary lubrication in a pin-on-disk tester. The 304 stainless steel disk had smooth areas alternating with areas of coarse surface texture consisting of indents or macroscopic grooves, 0.3–0.4 mm in size and in area fractions varying between 25 and 70%. The 3.2 mm flat pin was also SS304. The coarse texture has detrimental effects. For each pattern the friction coefficient is greater than for the smooth areas. It becomes independent of load as boundary conditions set in. In comparing various patterns it is noted that this friction coefficie

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cheng, Jiangtao, Aref Vandadi, and Chung-Lung Chen. "Condensation Heat Transfer on Two-Tier Superhydrophobic Surfaces." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-85841.

Texto completo da fonte

Resumo:

Superhydrophobic surfaces exhibit large contact angle (> 150°) and small hysteresis (< 5°) which facilitate liquid transport and are expected to enhance condensation heat transfer on the surfaces. By growing short carbon nanotubes (CNTs) on an array of microposts etched on a silicon wafer, we formed a two-tier multiscale texture mimicking the surface structure of lotus leaves. Compared to one-tier microtexture which energetically favors the Wenzel state, the two-tier texture with micro/nano-scale roughness favors the Cassie state, the desired superhydrophobic state. Using an environmenta

Estilos ABNT, Harvard, Vancouver, APA, etc.

Papadopoulos, C. I., P. G. Nikolakopoulos, and L. Kaiktsis. "Characterization of Stiffness and Damping in Textured Sector-Pad Micro- Thrust Bearings Using Computational Fluid Dynamics." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-69403.

Texto completo da fonte

Resumo:

In the present paper, a study of stiffness and damping in sector-pad micro-thrust bearings with artificial surface texturing is presented, based on Computational Fluid Dynamics (CFD) simulations. The bearing pads are modeled as consecutive three-dimensional independent micro-channels, each consisting of a smooth rotating wall (rotor) and a partially textured stationary wall (stator). CFD simulations are performed, consisting in the numerical solution of the Navier-Stokes equations for incompressible isothermal flow. The goal of the present study is to characterize the dynamic behavior of favor

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pothen, Zania S., and Stephen Nuske. "Texture-based fruit detection via images using the smooth patterns on the fruit." In 2016 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2016. http://dx.doi.org/10.1109/icra.2016.7487722.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Li, Wei, Si-pu Guo, Xiao-peng Zhou, David J. Kukulka, and Jin-liang Xu. "A General Correlation for Condensation Heat Transfer in Micro-Fin for Herringbone and Dimple-Texture Tubes." In ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/icnmm2015-48198.

Texto completo da fonte

Resumo:

An experimental investigation was performed to evaluate the condensation characteristics inside smooth, herringbone and dimple-textured (Vipertex 1EHT) tubes; with the same outer diameter (12.7 mm); using R22 and R410a refrigerants; for a mass flux that ranges from 81 to 178.5 kg/m 2 s. The condensation saturation temperature is 47°C; with an inlet quality of 0.8 and an outlet vapor quality of 0.2. Results indicate that the condensation heat transfer coefficient of the herringbone tube was approximately 3 times that of the smooth tube for R22; and has an enhancement heat transfer factor of 2.3

Estilos ABNT, Harvard, Vancouver, APA, etc.

Liu, Zhenyu, and Yi Wan. "A robust denoising method for random-valued impulse noise based on smooth and texture region separation." In 2012 International Conference on Systems and Informatics (ICSAI). IEEE, 2012. http://dx.doi.org/10.1109/icsai.2012.6223406.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Smooth texture"

Martin, S. J., K. O. Wessendorf, C. T. Gebert, G. C. Frye, R. W. Cernosek, L. Casaus, and M. A. Mitchell. Measuring liquid properties with smooth- and textured-surface resonators. Office of Scientific and Technical Information (OSTI), August 1993. http://dx.doi.org/10.2172/139545.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!