Zaloguj się

Gotowe bibliografie tematyczne / Aluminum Metallurgy / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Aluminum Metallurgy.

Rozprawy doktorskie na temat „Aluminum Metallurgy”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 19 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Aluminum Metallurgy”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Dimayuga, Francisco Cruz II. "Vacuum refining molten aluminum." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=72810.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Külünk, Bahadir. "Kinetics of removal of calcium and sodium by chlorination from aluminum and aluminum-1wt% magnesium alloys." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=39752.

Pełny tekst źródła

Streszczenie:

The kinetics of calcium and sodium removal at 730$ sp circ$C by chlorination from commercial purity (99.7% Al) and aluminum-1wt% magnesium alloys has been investigated. The contribution of chlorine containing gas bubbles, of intermediate reaction products generated by the chlorination process, as well as evaporation through the melt surface, to the removal of calcium and/or sodium has been documented quantitatively. Experimental parameters investigated were chlorine concentration in the gas bubbles and gas flow rate. The measurement of frequency of bubble formation at the tip of the gas bubbli

Style APA, Harvard, Vancouver, ISO itp.

3

Jaansalu, Kevin Michael. "Composites by directed oxidation of aluminum alloys." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60591.

Pełny tekst źródła

Streszczenie:

The manufacture of ceramic composites has traditionally been a complex and often expensive process. A new processing method, the DIMOX$ sp{ rm TM}$ process, takes advantage of the high temperature oxidation behaviour of aluminum alloys to produce a ceramic-metal composite. Although this process is fairly simple to implement, there has not been any attempt to link the starting materials and manufacturing conditions to the properties of the final composite. This work attempts to identify some critical parameters in the manufacturing process and how they affect the end product. The reaction tempe

Style APA, Harvard, Vancouver, ISO itp.

4

Baik, Youngmin. "Carbothermal synthesis of aluminum nitride using sucrose." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60643.

Pełny tekst źródła

Streszczenie:

In this work, the carbothermal reduction of Al$ sb2$O$ sb3$ to AlN was studied. Several kinds of aluminum oxides including $ alpha$-Al$ sb2$O$ sb3$, $ gamma$-Al$ sb2$O$ sb3$, $ theta$-Al$ sb2$O$ sb3$ and boehmite (AlOOH) were examined in order to observe the differences in reaction behaviour and powder characteristics obtained from each type of precursor. Cane sugar (sucrose) and carbon black were used as carbon sources. Reaction conditions studied were carbon to alumina ratio, temperature and reaction time. Sucrose resulted in a close-to-stoichiometric ratio of Al$ sb2$O$ sb3$:C (1:3.2) achie

Style APA, Harvard, Vancouver, ISO itp.

5

Tian, Chenguo. "Filtration of liquid aluminum with reticulated ceramic filters." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28932.

Pełny tekst źródła

Streszczenie:

Fluid flow and filtration phenomena associated with filtration of liquid aluminum using reticulated ceramic filters were systematically investigated. It was found that fluid flow through this type of filter could be described by Darcy's Law up to a Reynolds number of 8, and the permeability of this type of filter ranged from about $9 times10 sp{-3}$ to $4 times10 sp{-2} rm mm sp2$.<br>Parameters affecting filtration processes during the initial period were identified, some of which could be quantified numerically using a 2-D computational domain. According to these numerical analyses, the clea

Style APA, Harvard, Vancouver, ISO itp.

6

Tenekedjiev, Nedeltcho. "Strontium treatment of aluminum : 17% silicon casting alloys." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61774.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Hernández, Paz Juan Francisco. "Heat treatment and precipitation in A356 aluminum alloy." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=19547.

Pełny tekst źródła

Streszczenie:

Al-7%Si-0.3Mg (A356) foundry alloy is strontium modified and heat treated in order to obtain optimum mechanical properties. To date, the role that strontium modification plays in the precipitation process during the heat treatment is not well understood. The objective of the present work is to obtain a better understanding of the effect that strontium modification and heat treatment parameters exert on the properties of heat-treated Al-7%Si-0.3Mg alloy. The investigation consisted of a systematic measurement of the electrical conductivity and matrix microhardness of heat-treated coupons under

Style APA, Harvard, Vancouver, ISO itp.

8

Moosavi, Khoonsari Elmira. "Reinforced aluminum structure castings for powertrain automotive applications." Thesis, McGill University, 2009. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=66990.

Pełny tekst źródła

Streszczenie:

The reinforcement of an Al casting with ferrous inserts (hybrid systems) through a joining technique to utilize both Al alloys (lightness) and Fe-based alloys (stiffness) is of interest, especially in the transportation sector. This work focuses on different technological aspects of cast joining of cast iron to an Al alloy using an intermediate material (or coating). The experimental set up consisted of preparing the insert surface followed by coating the insert, and then, immersing it into an Al melt, and allowing the system to cool down to room temperature. The effects of f

Style APA, Harvard, Vancouver, ISO itp.

9

Stephen, Gail. "Al-Fe-Si intermetallics in 1000 series aluminum alloys." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=26424.

Pełny tekst źródła

Streszczenie:

Iron and silicon are the major impurities in the 1000 series of wrought aluminum alloys. As the aluminum is recycled, it picks up more and more of these impurities which cannot economically be refined out of the aluminum. When the concentration of these impurities reaches a certain limit (maximum limit in 1000 series is 1 weight percent (Fe+Si)), the aluminum must be downgraded. The Fe and Si form brittle intermetallic phases in these alloys. The two main phases are the plate-like $ beta$-AlFeSi (Al$ sb5$FeSi) and $ alpha$-AlFeSi (Al$ sb8$Fe$ sb2$Si) which has a Chinese Script morphology. The

Style APA, Harvard, Vancouver, ISO itp.

10

Zhang, Chunhui. "Controlled cooling of permanent mold castings of aluminum alloys." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=19619.

Pełny tekst źródła

Streszczenie:

The permanent mold casting process is a relatively popular and effective casting technology that can produce near-net-shape aluminum components with integrity, particularly for the automotive and aerospace industries. It is well recognized by the casting industry that it is essential to control the cooling of permanent mold castings in order to improve the quality of the castings, so there is a considerable incentive to develop a more effective method of mold cooling to control the temperature distribution of the mold and the casting. The current technologies for controlled cooling are air or

Style APA, Harvard, Vancouver, ISO itp.

11

Conte-Matos, Augusto. "The role of alloy composition and cooling rate from the melt on the dispersoid distribution in AA 6013." Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/20208.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Jeniski, Richard A. Jr. "Recrystallization behavior of aluminum alloy 6013." Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/19412.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Fauré, Philippe L. "Aluminium : production processes and architectural application." Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63919.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Paray, Florence. "Heat treatment and mechanical properties of aluminum-silicon modified alloys." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=41146.

Pełny tekst źródła

Streszczenie:

The commercial applications of cast Al-Si alloys depend to an important extent on controlling the morphology of the eutectic silicon through thermal modification in the solid state and/or chemical modification of the melt before the production of the casting. The effects of modification and/or heat treatment on the microstructure and the mechanical properties of 356 alloy have been investigated on both permanent mold and sand cast samples. Strontium (0.02%) and sodium (0.01%) were used to produce well modified microstructures. The importance of the amount of modifier used was also examined in

Style APA, Harvard, Vancouver, ISO itp.

15

Shabestari, Saeed G. "Formation of iron-bearing intermetallics in aluminum-silicon casting alloys." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28920.

Pełny tekst źródła

Streszczenie:

The formation of iron-bearing intermetallics in the 413 type of aluminum alloys was investigated comprehensively. Both synthetic and commercial 413 alloys were studied with iron concentrations in the range of 0.4-1.2 wt. % and manganese up to 0.5 wt.%. The effects of cooling rate during solidification and of melt chemistry on the morphology of iron intermetallic phases were determined. Image analysis was used to quantify the intermetallic size, volume fraction, and number, as a function of both melt chemistry and cooling rate. The total volume fraction of intermetallic compounds in these alloy

Style APA, Harvard, Vancouver, ISO itp.

16

Ragel, Kamal R. "Three dimensional modeling of vertical DC casting of aluminum alloys." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=84313.

Pełny tekst źródła

Streszczenie:

A three-dimensional mathematical model for the simulation of vertical direct chill (DC) slab casting of aluminum alloys has been developed. The model is based on the solution of the 3D time-averaged turbulent momentum (Navier-Stokes) and energy equations. The momentum equations are modified with a Darcy-type source term to simulate motion of the melt in the mushy region. The buoyancy force term is implemented in the model through the Boussinesq approximation. The low Reynolds number k-ε turbulence model of Launder and Sharma is used to calculate the Reynolds stresses and the turbulent h

Style APA, Harvard, Vancouver, ISO itp.

17

ALMEIDA, FILHO AMERICO de. "Elaboração e estudos de recristalização de ligas alumínio-magnésio-tório e alumínio-magnésio-nióbio." reponame:Repositório Institucional do IPEN, 2005. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11345.

Pełny tekst źródła

Streszczenie:

Made available in DSpace on 2014-10-09T12:50:54Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T13:58:07Z (GMT). No. of bitstreams: 1 11108.pdf: 32426138 bytes, checksum: e0fd60a0b29703462d6537e5ea445860 (MD5)<br>Tese (Doutoramento)<br>IPEN/T<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Style APA, Harvard, Vancouver, ISO itp.

18

Meratian, Isfahani Mahmood. "Thermal analysis of aluminum foundry alloys by a novel heat pipe probe." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28846.

Pełny tekst źródła

Streszczenie:

A new application of heat pipes is introduced. The present research deals with the development of a heat pipe for the on-line quality control of liquid aluminum silicon foundry alloys.<br>Thermal analysis is a technique whereby a small quantity of a melt is allowed to solidify while its cooling curve is recorded. Analysis of the cooling curve with standard mathematical algorithms allows one to determine a number of useful parameters that characterize the liquid and solid states of the material. In aluminum-silicon casting alloys thermal analysis is often used to assess the grain size and degre

Style APA, Harvard, Vancouver, ISO itp.

19

Ozdemir, Ozgur. "Effect of strontium on the oxidation behavior of molten aluminum-magnesium alloys." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=102689.

Pełny tekst źródła

Streszczenie:

Magnesium additions to aluminum enhance strength and hardness, lowering density, and improve corrosion resistance. However, during melting and casting processes, significant amounts of magnesium are lost due to selective oxidation. Preventing these losses would reduce the production cost and improve the quality of the final product.<br>The effects of various levels of strontium addition on the oxidation behaviour of aluminum-magnesium alloy melts were investigated by monitoring sample weight gains with time using a thermogravimetric balance at 750°C. Sample cross-sections have been examined in

Style APA, Harvard, Vancouver, ISO itp.

20

Lee, Kitae 1966. "The influence of texture on the reliability of aluminum and copper interconnects /." Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=37759.

Pełny tekst źródła

Streszczenie:

Texture in films develops during deposition processes and annealing of patterned wafers. Recent studies show that texture influences the performance and reliability of both aluminum and copper interconnects. To improve the current understanding of this matter, the influence of texture on reliability was studied.<br>The influence of texture on electromigration and stress-induced failures in aluminum interconnects was studied since these are the most often responsible for failures observed in aluminum interconnects. Results obtained showed that a strong {111} texture in aluminum interconnects im

Style APA, Harvard, Vancouver, ISO itp.

21

Dennis, Keith. "Effects of magnesium, silicon, and strontium on the oxidation of molten aluminum." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0018/MQ55020.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Shafyei, Najafabadi Ali. "The kinetics of dissolution of high melting point alloying elements in molten aluminum." Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=40249.

Pełny tekst źródła

Streszczenie:

Manganese and iron are two major alloying elements in various aluminum products. Since these elements have high melting points and low diffusivities in molten aluminum, their dissolution rates are very slow, when they are added to aluminum melts. In order to improve the kinetics of dissolution, several alloying methods have been introduced. All methods of alloying use mechanical stirring of some form or other to enhance dissolution rates by promoting forced convective mass transfer. In the present study, a comparison between the kinetics of dissolution of iron and manganese when added to the m

Style APA, Harvard, Vancouver, ISO itp.

23

La-Orchan, Wittaya. "Melt treatment effects on porosity and impact strength in hypoeutectic aluminum silicon alloy." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=22446.

Pełny tekst źródła

Streszczenie:

The effects of the three factors (modification, grain refinement, and hydrogen level) on the amount of porosity, impact strength, and performance of the reduced pressure test in A356 alloy have been studied. It was found that grain refinement, acting singly and in combination with modification, reduces the porosity by inducing mass feeding. However, this beneficial effect may not be found at all cooling rates and casting sizes. There is less total shrinkage in Sr-alloyed samples than in those which are non Sr-alloyed. The reason for this is supposed to be a difference in the liquid density whi

Style APA, Harvard, Vancouver, ISO itp.

24

Shang, Lihong. "Prediction of microporosity in aluminum silicon castings using criteria functions." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81564.

Pełny tekst źródła

Streszczenie:

Microporosity, a serious defect in Al-Si based castings, severely prevents their widespread applications in many critical conditions. The use of criteria functions to quantitatively predict microporosity level holds promise. To date, an ideal criteria function has yet to be obtained.<br>In the present work, microporosity distribution in three prominently used hypoeutectic Al-Si alloys (319, 356, and 332) was investigated. The prediction effectiveness of single solidification parameter and existing criteria functions was evaluated by correlating thermal data from simulation studies to ex

Style APA, Harvard, Vancouver, ISO itp.

25

Chang, Sin-ting Cynthia. "Randomization of recrystallization textures in an experimental Al-5%Mg alloy and AA6111." Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B36375561.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Wang, Yongqing. "Aluminide coatings on Fe-9Cr-1Mo steel synthesized by pack cementation for power generation applications : a dissertation presented to the faculty of the Graduate School, Tennessee Technological University /." Click to access online version, 2006. http://proquest.umi.com/pqdweb?index=89&did=1260818241&SrchMode=1&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1255459401&clientId=28564.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Chang, Sin-ting Cynthia, and 張倩婷. "Randomization of recrystallization textures in an experimental Al-5%Mgalloy and AA6111." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2005. http://hub.hku.hk/bib/B36375561.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Yuen, Pui Kei 1976. "Effects of strontium on the oxidation of molten aluminum alloys containing silicon and magnesium." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=34004.

Pełny tekst źródła

Streszczenie:

In the presence of air and oxygen, oxidation of a molten aluminum alloy will easily take place. The oxidation not only harms the operation by contributing to melt losses, but the processing of the oxides present in the melt and refractory is also costly in time and money. Refractory accretions formed due to the interactions between the oxide-layer and base refractory material, especially alumina-lined ones, are a significant problem for the industry. Aluminum alloys containing magnesium are known to oxidize much more easily and rapidly. In the foundry, oxidation of molten aluminum-magnesium al

Style APA, Harvard, Vancouver, ISO itp.

29

Mohanty, Pravansu Sekhar. "Studies on the mechanisms of heterogeneous nucleation of grains and pores in aluminum castings." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=41722.

Pełny tekst źródła

Streszczenie:

In the present study, a fundamental theoretical and experimental investigation has been carried out on the mechanisms of heterogeneous nucleation of grains and pores in aluminum castings. A direct addition technique has been developed to introduce known types and quantities of inoculants into liquid aluminum alloys, irrespective of their wettability and chemical reactivity while preserving the surface characteristics and melt chemistry. Many different types of inoculants such as: $ rm Al sb2O sb3$, SiC, MgO, $ rm Mg sb2AlO sb4$, TiB$ sb2$, TiC, SrO and Sr(OH)$ sb2$ have been successfully added

Style APA, Harvard, Vancouver, ISO itp.

30

Silva, Beethoven Max Alves da. "Influencia da microestrutura inicial e material de molde na tixoconformação da liga A356." [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263687.

Pełny tekst źródła

Streszczenie:

Orientador: Maria Helena Robert<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica<br>Made available in DSpace on 2018-08-06T16:34:52Z (GMT). No. of bitstreams: 1 Silva_BeethovenMaxAlvesda_M.pdf: 3678052 bytes, checksum: 2c49240a815892ad66565deba3473b59 (MD5) Previous issue date: 2007<br>Resumo: Neste trabalho investiga-se a influência da microestrutura inicial e do material do molde na tixoconformação da liga A356. São produzidas e testadas em operações de tixoforjamento pastas obtidas por três distintos processos: fusão parcial controlada de est

Style APA, Harvard, Vancouver, ISO itp.

31

Samuel, Ehab. "Serrated flow and enhanced ductility in coarse-grained Al-Mg alloys." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=115867.

Pełny tekst źródła

Streszczenie:

Aluminum 5XXX alloys are of industrial importance and interest as they combine a wide range of desirable strength, forming and welding characteristics with a high resistance to corrosion. The presence of Mg in these alloys ensures favorable mechanical properties. However, the room temperature stretching performance of these alloys is limited. Moreover, Al-Mg alloys are known for being susceptible to the Portevin-LeChatelier effect when deformed at room temperature. Nevertheless, improvements in ductility can be achieved through warm forming, especially when the ductility approaches superplasti

Style APA, Harvard, Vancouver, ISO itp.

32

Park, Conrad. "Mechanical Performance and Structure-Property Relations in6061B Aluminum Metal Matrix Composites." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1547842396716777.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Knittel, Susan Means 1961. "Sintering of aluminum-nitride in a microwave induced plasma." Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276877.

Pełny tekst źródła

Streszczenie:

The sintering of aluminum nitride in a microwave induced plasma was investigated. The plasma furnace consisted of a quartz tube inserted into a waveguide connected to a 2450 MHz microwave generator. After evacuating the tube to about 1.33 mbar, nitrogen gas was introduced, generating a steady plasma. Processing parameters such as gas pressure, power level, and time were optimized to yield maximum densification of aluminum nitride. Sintering of pure and doped AlN compacts was performed in the nitrogen plasma at temperatures up to 2000 S C. Undoped specimens reached densities of only 81% theoret

Style APA, Harvard, Vancouver, ISO itp.

34

Wang, Ganlin. "Effect of aluminum on recrystallization and precipitation of Nb HSLA steels." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=65336.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Weinberg, Jonathan David 1966. "Geometrical and computational modelling of grain boundaries in aluminum." Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/277888.

Pełny tekst źródła

Streszczenie:

This study presents an integrated approach using experimental high resolution electron microscopy, computer simulations and theoretical analysis, to provide a thorough atomic level investigation of grain boundaries. Examined here, are specific cases of pure aluminum grain boundaries. Energy calculations for the Sigma3 perfect twin, in a range of linear translational states, show that both the shape and location of the interfacial surface are important considerations.

Style APA, Harvard, Vancouver, ISO itp.

36

Blaskovich, Timothy D. "Computational modelling of an electromagnetic system for separation of solid inclusions from molten aluminum." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33958.

Pełny tekst źródła

Streszczenie:

Mathematical models and numerical solution methods for the computer simulation of solid particle trajectories in flows of molten aluminum subjected to steady, uniform, electric and magnetic fields are presented in this thesis. The underlying subject is electromagnetic (EM) filtration of molten metals.<br>Attention is focused on steady, laminar, fully developed flows of molten aluminum inside a straight separation chamber of uniform rectangular cross-section. The walls of this chamber are assumed to be electrically non-conducting. The investigation is limited to solid inclusions (particles) tha

Style APA, Harvard, Vancouver, ISO itp.

37

Cinkilic, Emre. "Alloy Design and Precipitation Modeling of High Fe Concentration Recycled Cast Aluminum Alloys for Structural Applications." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1555599698005398.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Wei, Wenjing. "Energy Consumption and Carbon Footprint of Secondary Aluminum Cast House." Thesis, KTH, Tillämpad processmetallurgi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-122081.

Pełny tekst źródła

Streszczenie:

Primary aluminum production brings about severe environmental burden due to its energy intensive process. Secondary aluminum production contributes to cutting off high energy demand around 90-95% and greenhouse gas emission by remelting scraps. However, previous research indicates melting furnace’s energy efficiency in secondary plant is still very low, which is around 26-29% and more than 70% heat is lost in different way. The objective of this project is to investigate energy consumption and greenhouse gas (GHG) emission in secondary aluminum cast house through process analysis. The result

Style APA, Harvard, Vancouver, ISO itp.

39

Turkyilmaz, Gokhan. "Processing And Assessment Of Aluminum Ceramic Fiber Reinforced Aluminum Metal Matrix Composite Parts For Automotive And Defense Applications." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610751/index.pdf.

Pełny tekst źródła

Streszczenie:

The aim of this study was to produce partially reinforced aluminum metal matrix composite components by insertion casting technique and to determine the effects of silicon content, fiber vol% and infiltration temperature on the mechanical properties of inserts, which were the local reinforcement parts of the components. Silicon content of alloys was selected as 7 wt% and 10 wt%. The reinforcement material, i.e. Saffil fiber preforms, had three different fiber vol% of 20, 25 and 30 vol% respectively. The infiltration temperatures of composite specimens were fixed as 750 &deg<br>C and 800 &deg<b

Style APA, Harvard, Vancouver, ISO itp.

40

Seifi, Seyed Mohsen. "Mechanical Property Evolution and Thermal Remediation of Aluminum Magnesium 5xxx Alloys Following Low and Intermediate Temperature Thermal Exposure." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1365507691.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Hinton, Kimberly D. "Extended heat treatment effects on the fracture toughness of cast aluminum alloy A357." Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/17361.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Barker, Simon William. "Diffusion induced liquid film migration in the aluminum-copper system /." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0001/NQ42721.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Byczynski, Glenn Edwin. "The strength and fatigue performance of 319 aluminum alloy castings." Thesis, University of Birmingham, 2002. http://etheses.bham.ac.uk//id/eprint/7030/.

Pełny tekst źródła

Streszczenie:

Analysis of fatigue samples sectioned from commercial 319 (Al-Si-Cu-Mg) alloy cylinder block castings showed that shrinkage pore networks and oxide films played an important role in fatigue failure. A reduced pressure technique was employed to study the relationship between porosity and oxide films. Links between oxide films and porosity were made and mechanisms for the inflation of films into porosity networks were established. Tensile tests performed on samples cast with and without filters showed that the ultimate tensile strengths of the filtered group had a Weibull modulus 2.4 times that

Style APA, Harvard, Vancouver, ISO itp.

44

Zhang, Bin. "Fatigue behavior in an aluminum casting alloy (A356.2): Effects of some defects, SDAS, Hipping and strontium modification." Diss., The University of Arizona, 2002. http://hdl.handle.net/10150/280228.

Pełny tekst źródła

Streszczenie:

Effects of pore, secondary dendrite arm spacings (SDAS ), hot isostatic pressing (Hipping), and strontium-modification on fatigue behavior were studied in an aluminum casting alloy (A356.2). Microstructures were revealed by X-ray radiography, light microscopy and scanning electron microscopy. Small-cracks were monitored by taking replicas of the surfaces with which the cracks intersected. As the SDAS increases from 15 to 55 μm, fatigue life decreases by a factor of 3 in low-cycle fatigue, and 100 in high-cycle fatigue. When SDAS is less than 30 mum, the pore size is below a critical size of ∼8

Style APA, Harvard, Vancouver, ISO itp.

45

Thanaboonsombut, Buncha. "Microstructural evolution and recrystallization modeling in AA6013 and compositional variants of 6013." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/20020.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Priest, Matthew. "Synthesis of reactive element-modified aluminide coatings on single-crystal Ni-based superalloys by a pack cementation process a thesis presented to the faculty of the Graduate School, Tennessee Technological University /." Click to access online, 2009. http://proquest.umi.com/pqdweb?index=26&did=1760523421&SrchMode=1&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1254926883&clientId=28564.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Sivertsen, Halses Sebastian. "Die life prediction using High Pressure Die Casting simulations." Thesis, Tekniska Högskolan, Jönköping University, JTH, Material och tillverkning, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-50031.

Pełny tekst źródła

Streszczenie:

Global trends in automotive industry for weight reduction drives an interest for casting of structural aluminum parts. High pressure die casting (HPDC) is chosen for this purpose since it enables manufacturing of large series parts where complexity and repeatability is demanded. Aluminum alloys have hence been developed through the years to obtain suitable mechanical properties for high strength parts. These alloys have been investigated to predict the types of potential failure mechanisms during HPDC in order to determine die life through simulations. Die life prediction was performed through

Style APA, Harvard, Vancouver, ISO itp.

48

Sen, Fatih Gurcag. "Non-equilibrium Molecular Dynamics Of Electromigration In Aluminum And Its Alloys." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607654/index.pdf.

Pełny tekst źródła

Streszczenie:

With constant miniaturization of integrated circuits, the current densities experienced in interconnects in electronic circuits has been multiplied. Aluminum, which is widely used as an interconnect material, has fast diffusion kinetics under low temperatures. Unfortunately, the combination of high current density and fast diffusion at low temperatures causes the circuit to fail by electromigration (EM), which is the mass transport of atoms due to the momentum transfer between conducting electrons and diffusing atoms. In the present study, the effect of alloying elements in aluminum on the dif

Style APA, Harvard, Vancouver, ISO itp.

49

Demirel, Onur. "Development Of Automobile Chassis Parts Via Aluminum Extrusion And Sand Casting Technology." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614965/index.pdf.

Pełny tekst źródła

Streszczenie:

Due to the environmental issues related with fuel consumption and additionally passenger safety, aluminum space frame chassis is promising a big opportunity to design a lightweight structure with a high stiffness. Despite the lower stiffness and strength of aluminum in comparison to the conventional steel chassis, it can be compensated with changing thickness and design of structure by space frame geometry In this study, instead of using steel for automobile chassis, main goal is producing a space frame structure with using aluminum in an extrusion and sand casting processes and improve the st

Style APA, Harvard, Vancouver, ISO itp.

50

Anderson, Danny. "Effect of the joint addition of aluminum and molybdenum on the precipitation and recrystallization in HSLA steels." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=66207.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!