Zaloguj się

Gotowe bibliografie tematyczne / Aluminum Metallurgy / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Aluminum Metallurgy.

Artykuły w czasopismach na temat „Aluminum Metallurgy”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 19 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Aluminum Metallurgy”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Hildeman, Gregory J., and Michael J. Koczak. "Aluminum Powder Metallurgy." JOM 38, no. 8 (August 1986): 30–32. http://dx.doi.org/10.1007/bf03257784.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Kustov, A. D., and O. G. Parfenov. "High-speed aluminum metallurgy." Doklady Chemistry 462, no. 2 (June 2015): 149–51. http://dx.doi.org/10.1134/s0012500815060075.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Takeda, Yoshinobu, Yusuke Odani, and Tetsuya Hayashi. "Powder metallurgy of aluminum alloys." Bulletin of the Japan Institute of Metals 27, no. 10 (1988): 789–96. http://dx.doi.org/10.2320/materia1962.27.789.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Bolaños-Bernal, Sergio Esteban, and Irma Angarita-Moncaleano. "Graphene reinforced aluminum matrix composite obtaining by powder metallurgy." ITECKNE 16, no. 2 (December 16, 2019): 18–24. http://dx.doi.org/10.15332/iteckne.v16i2.2353.

Pełny tekst źródła

Streszczenie:

Several researchers have reported graphene as an ideal reinforcement for composite materials due to its interesting properties [1]. The graphene-reinforced aluminium matrix composite material was obtaining by powder metallurgy. This study investigated the effect of aluminum powder morphology on compaction capacity and mechanical strength of composite material. Different milling times were used to determine the optimal time required in manufacturing. The proper compaction load was determined change its values and analyzing the effect of the different loads on the characteristics of the composit

Style APA, Harvard, Vancouver, ISO itp.

5

TAKEDA, Yoshinobu. "A prospect of aluminum powder metallurgy." Journal of Japan Institute of Light Metals 37, no. 10 (1987): 639–45. http://dx.doi.org/10.2464/jilm.37.639.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Pramanik, Dipankar. "Aluminum-Based Metallurgy for Global Interconnects." MRS Bulletin 20, no. 11 (November 1995): 57–60. http://dx.doi.org/10.1557/s0883769400045590.

Pełny tekst źródła

Streszczenie:

In an integrated circuit (IC), the global interconnects are used to run power and ground to the individual transistors as well as to send signals across the chip. The width of interconnects can vary, depending on the current that is carried by the interconnect. Figure 1 shows a cross section of a double-metal complementary metal oxide semiconductor (CMOS) circuit illustrating the major components of a multilevel metallization circuit. The global interconnect connects to the diffusion and polysilicon gates through the contacts. The intermetal dielectric electrically separates the different leve

Style APA, Harvard, Vancouver, ISO itp.

7

Kulkarni, G. J., D. Banerjee, and T. R. Ramachandran. "Physical metallurgy of aluminum-lithium alloys." Bulletin of Materials Science 12, no. 3-4 (September 1989): 325–40. http://dx.doi.org/10.1007/bf02747140.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Donaldson, I. W. "High Thermal Conductivity Aluminum Powder Metallurgy Materials." Materials Science Forum 783-786 (May 2014): 120–25. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.120.

Pełny tekst źródła

Streszczenie:

High thermal conductivity aluminum has special advantages for electronic packaging and thermal management applications because of the combination of excellent thermal conductivity and relatively low density. Recent development of new press-and-sinter aluminum materials with low levels of alloying that sinters to a high density yielding a high thermal conductivity approaching the theoretical value for pure aluminum. The sintered materials possess thermal conductivity (TC) exceeding 200 w/m-oK (typically 215 – 230 w/m-oK), which makes it unique, since cast and wrought aluminum materials typicall

Style APA, Harvard, Vancouver, ISO itp.

9

Jiang, Z., C. Lucien Falticeanu, and I. T. H. Chang. "Warm Compression of Al Alloy PM Blends." Materials Science Forum 534-536 (January 2007): 333–36. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.333.

Pełny tekst źródła

Streszczenie:

With the onging trend of reducing the weight of automotive parts, there is also an increasing trend in the use of light alloys. Recently, aluminum powder metallurgy has been the subject of great attention due to the combination of the lightweight characteristics of aluminium and the efficient material utilisation of the powder metallurgical process, which offer attractive benefits to potential end-users. Conventional press and sinter route of non-ferrous P/M products are based compaction at room temperature prior to the sintering cycle. However, warm compaction process has successfully provide

Style APA, Harvard, Vancouver, ISO itp.

10

TSUCHIDA, Shigeo. "Degassing and consolidation in aluminum powder metallurgy." Journal of Japan Institute of Light Metals 37, no. 10 (1987): 656–64. http://dx.doi.org/10.2464/jilm.37.656.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Bora, Anil, P. P. Singha, P. S. Robi, and A. Srinivasan. "Powder metallurgy processing of ruthenium aluminum alloys." Journal of Materials Processing Technology 153-154 (November 2004): 952–57. http://dx.doi.org/10.1016/j.jmatprotec.2004.04.155.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Gonza´lez-Carrasco, J. L., F. Garci´a-Cano, G. Caruana, and M. Lieblich. "Aluminum/Ni3Al composites processed by powder metallurgy." Materials Science and Engineering: A 183, no. 1-2 (June 1994): L5—L8. http://dx.doi.org/10.1016/0921-5093(94)90914-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Barrera, E. V., J. Sims, and D. L. Callahan. "Development of fullerene-reinforced aluminum." Journal of Materials Research 10, no. 2 (February 1995): 366–71. http://dx.doi.org/10.1557/jmr.1995.0366.

Pełny tekst źródła

Streszczenie:

Powder metallurgy and casting have been used to produce aluminum with 1.3, 4, and 8 vol. % fullerene additions. Fullerene extract was mixed with Al and heat-treated to obtain various levels of dispersion of the fullerenes. Intergranular dispersion of stable fullerenes was accomplished by both powder metallurgy and casting; however, x-ray diffraction indicated the formation of some Al4C3. Homogeneous dispersion did not occur because of limited diffusion in the solid state or limited solubility of fullerene in Al in the liquid state. Enhancements in hardness over that for Al were observed yet we

Style APA, Harvard, Vancouver, ISO itp.

14

Behera, Rajesh Kumar, Birajendu Prasad Samal, and Sarat Chandra Panigrahi. "Manufacture of die and their designing parameters for sintered AMC product." Matériaux & Techniques 107, no. 6 (2019): 605. http://dx.doi.org/10.1051/mattech/2020009.

Pełny tekst źródła

Streszczenie:

The main goal in the advancement of composites with an aluminum metal matrix is to provide high performance and better mechanical properties from the currently available materials. Aluminium metal composite (AMC) can be researched and used in many industrial applications, such as manufacturing, aerospace, defense, pipelines and the automotive industry. The production of AMC is only possible with help of a suitable die in solid route of powder metallurgy process. Thus, the design of die is most important step in the process of powder metallurgy. The shape, size and design of the die directly in

Style APA, Harvard, Vancouver, ISO itp.

15

Khamsuk, Sunisa, K. Choosakull, and P. Wanwong. "Effect of Space Holder Size on the Porous High Purity Aluminum Property." Key Engineering Materials 846 (June 2020): 93–98. http://dx.doi.org/10.4028/www.scientific.net/kem.846.93.

Pełny tekst źródła

Streszczenie:

Porous high purity aluminum was fabricated using a powder metallurgy route combined with the space holder technique. The high purity aluminum powder was mixed with three different particle sizes and contents of the space holder material. The mixed powders were cold compacted at 400 MPa and sintered at 550 °C. The effects of space holder size on the microstructure and mechanical properties of porous high purity aluminum were systematically studied. Results revealed that the size and content of the space holder materials have a significant effect on the mechanical properties of porous aluminium.

Style APA, Harvard, Vancouver, ISO itp.

16

Otsuki, Masato, Koichi Yuri, and Tohru Kohno. "Cavitation Erosion Characteristics of Powder Metallurgy Aluminum Alloys." Journal of the Japan Society of Powder and Powder Metallurgy 41, no. 8 (1994): 922–26. http://dx.doi.org/10.2497/jjspm.41.922.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Campbell, John B. "An advance in powder metallurgy aluminum alloy etchants." Metallography 18, no. 4 (November 1985): 413–20. http://dx.doi.org/10.1016/0026-0800(85)90009-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Ekvall, J. C., and D. J. Chellman. "Ingot metallurgy aluminum-lithium alloys for aircraft structure." Journal of Aircraft 24, no. 4 (April 1987): 255–61. http://dx.doi.org/10.2514/3.45434.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Mishra, R. S., T. R. Bieler, and A. K. Mukherjee. "Superplasticity in powder metallurgy aluminum alloys and composites." Acta Metallurgica et Materialia 43, no. 3 (March 1995): 877–91. http://dx.doi.org/10.1016/0956-7151(94)00323-a.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Webster, D. "Aluminum-lithium powder metallurgy alloys with improved toughness." Metallurgical Transactions A 19, no. 3 (March 1988): 603–15. http://dx.doi.org/10.1007/bf02649274.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Perepelitsyn, V. A., V. A. Proshkin, V. M. Rytvin, V. G. Ignatenko, I. A. Yarosh, and A. N. Abyzov. "Non-traditional domestic refractory materials for aluminum metallurgy." Refractories and Industrial Ceramics 49, no. 4 (July 2008): 257–60. http://dx.doi.org/10.1007/s11148-008-9090-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Awad, Mahmoud, Noha M. Hassan, and Sathish Kannan. "Mechanical properties of melt infiltration and powder metallurgy fabricated aluminum metal matrix composite." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 13 (May 10, 2021): 2093–107. http://dx.doi.org/10.1177/09544054211015956.

Pełny tekst źródła

Streszczenie:

Metal foams have drawn an increasing interest especially in applications where weight and energy absorption are critical. Despite the extensive studies available on their characterization and enhanced fabrication techniques, limited work was found on the possibility of producing a porous composite foam. The objective of this article is to investigate two new synthesis techniques for manufacturing metal matrix composite foam that is, powder metallurgy and melt infiltration. Both techniques are studied using Sodium Chloride (NaCl) as a space holder in an aluminum-based metal matrix and graphene

Style APA, Harvard, Vancouver, ISO itp.

23

Tiryakioğlu, Murat. "Intrinsic and Extrinsic Effects of Microstructure on Properties in Cast Al Alloys." Materials 13, no. 9 (April 25, 2020): 2019. http://dx.doi.org/10.3390/ma13092019.

Pełny tekst źródła

Streszczenie:

The metallurgy of cast aluminum alloys has always been considered to be different from that of wrought alloys. Metallurgists have been taught that pores are intrinsic in cast aluminum alloys and that mechanical properties in cast aluminum alloys are controlled by dendrite arm spacing, the presence of Fe-bearing particles, and the size of Si particles in Al–Si alloys, which fracture and debond during deformation, leading to premature failure. Whether these effects are intrinsic or extrinsic, i.e., mere correlations due to the structural quality of castings, is discussed in detail. Ideal propert

Style APA, Harvard, Vancouver, ISO itp.

24

Hernández-Méndez, F., A. Altamirano-Torres, José G. Miranda-Hernández, Eduardo Térres-Rojas, and Enrique Rocha-Rangel. "Effect of Nickel Addition on Microstructure and Mechanical Properties of Aluminum-Based Alloys." Materials Science Forum 691 (June 2011): 10–14. http://dx.doi.org/10.4028/www.scientific.net/msf.691.10.

Pełny tekst źródła

Streszczenie:

In this work a comparative study between microstructure and mechanical properties of aluminum-nickel alloys with different contents of nickel was carried out. Alloys were produced by powders metallurgy. Characterization results indicates that the microstructure of the aluminum-nickel alloys present a thin and homogeneous distribution of an intermetallic compound in the aluminum’s matrix, identified as Al3Ni. Furthermore, it was find out that the amount of intermetallic Al3Ni increase as the nickel content in the alloy rises. Regarding the mechanical properties evaluated; it was establishes tha

Style APA, Harvard, Vancouver, ISO itp.

25

Zhu, Wan Bo, Zheng Gui Zhang, Hao Nan Chen, and Tie Xiao. "Review and Outlook of Aluminum Matrix Composites." Materials Science Forum 984 (April 2020): 119–24. http://dx.doi.org/10.4028/www.scientific.net/msf.984.119.

Pełny tekst źródła

Streszczenie:

In the past 20 years, the development of aluminum matrix composites (AMCs) has made a qualitative leap. This article comprehensively introduces the performance characteristics and the preparation methods of aluminum matrix composites. The powder metallurgy method (P/M) is elaborated in detail. And the applications of aluminum matrix composites in aerospace, automobile and other fields are described. Finally, the future development of aluminum matrix composites is prospected.

Style APA, Harvard, Vancouver, ISO itp.

26

Pourali, Omid, Hashem Ghasemi Kadijani, and Farideh Mohammadi Khangheshlaghi. "Chemical conditioning and monitoring to control and minimize chemistry-related damages in Heller dry cooled combined cycle power plants." Anti-Corrosion Methods and Materials 64, no. 2 (March 6, 2017): 188–208. http://dx.doi.org/10.1108/acmm-02-2016-1648.

Pełny tekst źródła

Streszczenie:

Purpose An effective chemical conditioning technique was successfully tested and investigated to control and minimize the chemistry-related damages within mixed metallurgy steam and water cycle of Heller dry cooled combined cycle power plants (CCPPs), in which cooling water and condensate are completely mixed in direct contact condenser. This study aims to perform a comprehensive experimental research in four mixed metallurgy steam and water cycle. Design/methodology/approach A comprehensive experimental study was carried out in four mixed metallurgy steam and water cycle fabricated with ferro

Style APA, Harvard, Vancouver, ISO itp.

27

Sunada, S., and N. Nunomura. "Electrochemical Impedance Characteristics of Sintered 7075 Aluminum Alloy Under Ssrt Condition." Archives of Metallurgy and Materials 58, no. 2 (June 1, 2013): 505–8. http://dx.doi.org/10.2478/amm-2013-0027.

Pełny tekst źródła

Streszczenie:

Powder metallurgy (P/M) process has the advantage of better formability to fabricate complex shape products without machining and welding. And recently this P/M process has been applied to the production of aluminum alloys. The P/M aluminum alloys thus produced also have received considerable interest because of their fine and homogeneous structure. Many papers have been published on the mechanical properties of the aluminum alloys produced by P/M process while there have been few on their corrosion properties from the view point of electrochemistry. In this experiment, therefore, two kinds of

Style APA, Harvard, Vancouver, ISO itp.

28

Luo, Hong Jie, Hao Lin, Jian Kun Zhang, and Guang Chun Yao. "Al-Si Alloy Foam Prepared by Two Step Foaming Method." Materials Science Forum 817 (April 2015): 42–47. http://dx.doi.org/10.4028/www.scientific.net/msf.817.42.

Pełny tekst źródła

Streszczenie:

Two basic methods can be used to fabricate aluminum foam. One is powder metallurgy route which can provide the near net shape casting containing aluminum foam core, and the other is melt foaming route which can prepare large scale aluminum foam plate directly. To combine the advantages of above two methods, the precursor was obtained through melt foaming route and then baked in a furnace like that of powder metallurgy method in this investigation. The test results indicated that the SiC and TiH2 particles after treatment in air could be dispersed in Al-Si matrix alloy melt and the precursors w

Style APA, Harvard, Vancouver, ISO itp.

29

Zou, Cheng Lu, Gui Hong Geng, and Wei Ye Chen. "Development and Application of Aluminium-Lithium Alloy." Applied Mechanics and Materials 599-601 (August 2014): 12–17. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.12.

Pełny tekst źródła

Streszczenie:

The history of aluminium-lithium alloys development has been reviewed in this paper. According to the strength, weld ability and corrosion resistance, thermal stability and plasticity, aluminium-lithium alloy has been categorized and the defects of aluminium-lithium alloys in early stage have been analyzed. As compared the third generation of aluminium-lithium alloy with normal aluminum alloy and composite materials, it indicates aluminium-lithium alloy has better performance, lower cost and reduced weight. After analyzing the advantages and disadvantages of the rapid solidification, ingot cas

Style APA, Harvard, Vancouver, ISO itp.

30

Cojocaru, Mihai Ovidiu, Mihaela Raluca Condruz, and Florică Tudose. "Consolidation Features of Aluminum-Alumina Compositions by Powder Metallurgy Methods." Solid State Phenomena 254 (August 2016): 110–15. http://dx.doi.org/10.4028/www.scientific.net/ssp.254.110.

Pełny tekst źródła

Streszczenie:

In this paper was followed the processing flow of aluminum-alumina compositions (10÷20% alumina) in powder state, aiming to obtain aluminum matrix composites reinforced with alumina particles, starting from selecting and mixing the grading fraction of both components reaching up to sintering; it was analyzed the way in which reflects the variation of grading fraction ratio (expressed through average particle diameter in the analyzed fractions limits) on the level of technological interest features: apparent density, tapped density, flowability, presability and on densification after sintering

Style APA, Harvard, Vancouver, ISO itp.

31

Kuz’min, M. P., M. Yu Kuz’mina, Jia Q. Ran, A. S. Kuz’mina, and A. E. Burdonov. "The use of carbon-containing wastes of aluminum production in ferrous metallurgy." Izvestiya. Ferrous Metallurgy 63, no. 10 (December 10, 2020): 836–41. http://dx.doi.org/10.17073/0368-0797-2020-10-836-841.

Pełny tekst źródła

Streszczenie:

The article discusses the prospects of recycling the most massive wastes of aluminum production (namely, used cathode blocks of electrolyzers, gas treatment dust, gas treatment residue, and flotation tailing). It have been indicated the volumes of wasteaccumulation and a special attention has been focused on the need of their disposal with a view to improve the environmental conditions of the territories adjacent to the industrial zones. Specific characteristics of the generated waste have been determined, which indicate the possibility of their secondary use and transfer from waste to by-prod

Style APA, Harvard, Vancouver, ISO itp.

32

Hayashi, Tetsuya, and Kentaro Azetsu. "Development of Aluminum Powder Metallurgy Composites for Cylinder Liner." Journal of the Japan Society of Powder and Powder Metallurgy 48, no. 5 (2001): 426–31. http://dx.doi.org/10.2497/jjspm.48.426.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Koizumi, Takuya, Kota Kido, Kazuhiko Kita, Koichi Mikado, Svyatoslav Gnyloskurenko, and Takashi Nakamura. "Foaming Agents for Powder Metallurgy Production of Aluminum Foam." MATERIALS TRANSACTIONS 52, no. 4 (2011): 728–33. http://dx.doi.org/10.2320/matertrans.m2010401.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Research Association Of Aluminum Po and Yoshinobu TAKEDA. "Achievement of the research association of aluminum powder metallurgy." Journal of Japan Institute of Light Metals 40, no. 2 (1990): 145–55. http://dx.doi.org/10.2464/jilm.40.145.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Sigli, Christophe, H. Vichery, and B. Grange. "Computer Assisted Metallurgy for Non Heat Treatable Aluminum Alloys." Materials Science Forum 217-222 (May 1996): 391–96. http://dx.doi.org/10.4028/www.scientific.net/msf.217-222.391.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Xie, Zhen-kai, Yasuo Yamada, and Takumi Banno. "Mechanical Properties of Microporous Aluminum Fabricated by Powder Metallurgy." Japanese Journal of Applied Physics 45, No. 32 (August 11, 2006): L864—L865. http://dx.doi.org/10.1143/jjap.45.l864.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Jamal, N. A., O. Maizatul, H. Anuar, F. Yusof, Y. Ahmad Nor, K. Khalid, and M. N. Zakaria. "Preliminary development of porous aluminum via powder metallurgy technique." Materialwissenschaft und Werkstofftechnik 49, no. 4 (April 2018): 460–66. http://dx.doi.org/10.1002/mawe.201700269.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Rack, H. J. "FABRICATION OF HIGH PERFORMANCE POWDER-METALLURGY ALUMINUM MATRIX COMPOSITES." Advanced Materials and Manufacturing Processes 3, no. 3 (January 1988): 327–58. http://dx.doi.org/10.1080/08842588708953210.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Chen, J. K., and I. S. Huang. "Thermal properties of aluminum–graphite composites by powder metallurgy." Composites Part B: Engineering 44, no. 1 (January 2013): 698–703. http://dx.doi.org/10.1016/j.compositesb.2012.01.083.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Buasri, Achanai, Chudeth Prasanwon, Bhornwalan Boonsong, Pantira Kohprasert, and Vorrada Loryuenyong. "The Fabrication of Graphene-Reinforced Aluminum Composites by Powder Metallurgy and Uniaxial Pressing." Key Engineering Materials 780 (September 2018): 10–14. http://dx.doi.org/10.4028/www.scientific.net/kem.780.10.

Pełny tekst źródła

Streszczenie:

This research studied the fabrication of graphene-reinforced aluminum composite via powder metallurgy and uniaxial pressing. The process started from mixing graphene with aluminum powder with various content of graphene (0.5, 1, 1.5, 2 and 4 wt.%) in acetone medium, followed by dispersion process at high frequency using an ultrasonic bath. The mixed composite powders were then formed into pellet and sintered at 600°C. The results showed that when graphene content in graphene reinforced aluminum composite is low (0.5wt.%, 1wt.% and 1.5wt.%), the hardness was enhanced. It was suspected that grap

Style APA, Harvard, Vancouver, ISO itp.

41

Baghchesara, Mohammad Amin, Hossein Abdizadeh, and Hamid Reza Baharvandi. "Effects of MgO Nano Particles on Microstructural and Mechanical Properties of Aluminum Matrix Composite prepared via Powder Metallurgy Route." International Journal of Modern Physics: Conference Series 05 (January 2012): 607–14. http://dx.doi.org/10.1142/s201019451200253x.

Pełny tekst źródła

Streszczenie:

The objective of the present investigation was to evaluate the microstructural and mechanical properties of Al /nano MgO composite prepared via powder metallurgy method. Pure atomized aluminum powder with an average particle size of 1μm and MgO particulate with an average particle size between 60 to 80 nm were used. Composites containing 1.5, 2.5 and 5 percent of volume fraction of MgO were prepared by powder metallurgy method. The specimens were pressed by Cold Isostatic Press machine (CIP), subsequently were sintered at 575, 600 and 625°C. After sintering and preparing the samples, mechanica

Style APA, Harvard, Vancouver, ISO itp.

42

Chebotarev, A. G., and D. D. Sementsova. "Comprehensive Assessment of Working Conditions and Occupational Disease Rates at Mining and Metallurgical Enterprises." Mining Industry Journal (Gornay Promishlennost), no. 1/2021 (March 15, 2021): 114–19. http://dx.doi.org/10.30686/1609-9192-2021-1-114-119.

Pełny tekst źródła

Streszczenie:

The paper presents the results of hygienic assessment of the working environment and work process factors at surface and underground ore mining operations, ferrous metallurgy plants and aluminum production facilities. It has been established that workers are affected by a complex of production factors (dust, toxic substances, noise, vibration, unfavorable micro climate, etc.), the level of which often exceeds the hygienic standards. The workplace conditions of the primary jobs at these enterprises in 60-80% of cases are classified as hazardous, i.e. Class 3 of various hazard degrees. The incid

Style APA, Harvard, Vancouver, ISO itp.

43

Uzun, A. "Compressive Crush Performance of Square Tubes Filled with Spheres of Closed-Cell Aluminum Foams." Archives of Metallurgy and Materials 62, no. 3 (September 26, 2017): 1755–60. http://dx.doi.org/10.1515/amm-2017-0267.

Pełny tekst źródła

Streszczenie:

AbstractThis paper describes the compressive crush behaviour of spheres of closed-cell aluminium foams with different diameters (6, 8 and 10 mm) and square tubes filled with these spheres. The spheres of closed-cell aluminium foams are net spherical shape fabricated via powder metallurgy methods by heating foamable precursor materials in a mould. The square tubes were filled by pouring the spheres of closed-cell aluminium foams freely (without any bonding). The compressive crush performance of square tubes filled with spheres of closed-cell aluminum foams were compared to that of the empty tub

Style APA, Harvard, Vancouver, ISO itp.

44

Dong, Kai Xin, Chao Yuan, Shuang Gao, and Jian Ting Guo. "Oxidation Behavior of a Disk Powder Metallurgy Superalloy." Materials Science Forum 898 (June 2017): 467–75. http://dx.doi.org/10.4028/www.scientific.net/msf.898.467.

Pełny tekst źródła

Streszczenie:

Oxidation behaviors of a spray-forming disk superalloy LSHR were investigated in the temperature range of 750-900°C. The composition and morphology of oxidation scales were investigated by X-ray diffraction (XRD), scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS), and electron probe microanalysis (EPMA). Oxidation kinetics was studied by the means of isothermal oxidation testing in air and weight gain measurement. The oxide scales were composed of Cr2O3, TiO2, Al2O3 and a small amount of NiCr2O4. The experiment results showed that oxidation kinetics and oxide

Style APA, Harvard, Vancouver, ISO itp.

45

Veillère, Amélie, Hiroki Kurita, Akira Kawasaki, Yongfeng Lu, Jean-Marc Heintz, and Jean-François Silvain. "Aluminum/Carbon Composites Materials Fabricated by the Powder Metallurgy Process." Materials 12, no. 24 (December 4, 2019): 4030. http://dx.doi.org/10.3390/ma12244030.

Pełny tekst źródła

Streszczenie:

Aluminum matrix composites reinforced with carbon fibers or diamond particles have been fabricated by a powder metallurgy process and characterized for thermal management applications. Al/C composite is a nonreactive system (absence of chemical reaction between the metallic matrix and the ceramic reinforcement) due to the presence of an alumina layer on the surface of the aluminum powder particles. In order to achieve fully dense materials and to enhance the thermo-mechanical properties of the Al/C composite materials, a semi-liquid method has been carried out with the addition of a small amou

Style APA, Harvard, Vancouver, ISO itp.

46

Sarmah, Ankita, Siddhartha Kar, and Promod Kumar Patowari. "Surface modification of aluminum with green compact powder metallurgy Inconel-aluminum tool in EDM." Materials and Manufacturing Processes 35, no. 10 (June 1, 2020): 1104–12. http://dx.doi.org/10.1080/10426914.2020.1765253.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Vani, Vemula Vijaya, and Sanjay Kumar Chak. "The effect of process parameters in Aluminum Metal Matrix Composites with Powder Metallurgy." Manufacturing Review 5 (2018): 7. http://dx.doi.org/10.1051/mfreview/2018001.

Pełny tekst źródła

Streszczenie:

Metal Matrix Composites are developed in recent years as an alternative over conventional engineering materials due to their improved properties. Among all, Aluminium Matrix Composites (AMCs) are increasing their demand due to low density, high strength-to-weight ratio, high toughness, corrosion resistance, higher stiffness, improved wear resistance, increased creep resistance, low co-efficient of thermal expansion, improved high temperature properties. Major applications of these materials have been in aerospace, automobile, military. There are different processing techniques for the fabricat

Style APA, Harvard, Vancouver, ISO itp.

48

Wei, Li, and Yu Sun. "Study on Bubble's Stability in Process of Preparing Foam Aluminum by Powder Metallurgy Method." Advanced Materials Research 146-147 (October 2010): 370–73. http://dx.doi.org/10.4028/www.scientific.net/amr.146-147.370.

Pełny tekst źródła

Streszczenie:

In this paper, the bubble’s stability is studied in the process of preparing foam aluminum by powder metallurgy. In this work, carborundum particles, soot powder and carbon fiber are added into pure aluminum powder, respectively. The microstructure of cell wall of foam aluminum, the viscosity and surface tension of melt is investigated. It is discussed the bubble stability which is controlled through adding SiC particles, soot powder and carbon fiber, and the mechanism of bubble’s stability is analyzed. The experiment results showed that the homogeneity of bubble holes of foam aluminum is bett

Style APA, Harvard, Vancouver, ISO itp.

49

Gallego Parra, Samuel, Mihai Alin Pop, Tibor Bedő, and Virgil Geamăn. "Thixoforming and Powder Metallurgy - A Comparative Study and Practical Case." Materials Science Forum 907 (September 2017): 193–97. http://dx.doi.org/10.4028/www.scientific.net/msf.907.193.

Pełny tekst źródła

Streszczenie:

Pistons are commonly made of a cast aluminum alloy for excellent and lightweight thermal conductivity. Thermal conductivity is the ability of a material to conduct and transfer heat. Aluminum expands when heated and proper clearance must be provided to maintain free piston movement in the cylinder bore. The piston transforms chemical energy of the burned fuel into a mechanical energy. For this reason, the pistons are submitted to a complex combination of thermal stresses and high temperature mechanical cycles. In this study both powder metallurgy (PM) and thixoforming techniques are used to pr

Style APA, Harvard, Vancouver, ISO itp.

50

Jamaludin, Shamsul Baharin, Josef Hadipramana, Mohd Fitri Mohd Wahid, Kamarudin Hussin, and Azmi Rahmat. "Microstructure and Interface Analysis of Glass Particulate Reinforced Aluminum Matrix Composite." Advanced Materials Research 795 (September 2013): 578–81. http://dx.doi.org/10.4028/www.scientific.net/amr.795.578.

Pełny tekst źródła

Streszczenie:

A characterization of microstructure and interface was made on the composites Al-4 % Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and artificial ageing. The microstructures of the composite showed that the glass particulates were in-homogenously distributed in the matrix and segregated near copper. The aluminum oxide layer was found between aluminum, copper and glass particulate. Micro cracks were observed in the aluminum oxide layer and at the interface between aluminum oxide layer and aluminum. Hardness increa

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!