Zaloguj się

Gotowe bibliografie tematyczne / Automatic Cutting / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Automatic Cutting.

Artykuły w czasopismach na temat „Automatic Cutting”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Automatic Cutting”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Manikandan, P., K. Krishnakanth, and Prof P. Mathan Kumar. "Automatic PVC Pipe Cutting Machine." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (2018): 245–48. http://dx.doi.org/10.31142/ijtsrd10869.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Ming, Lei, Jiahong Zheng, Yue Shi, and Jiahou Dong. "Design and testing of automatic downpipe equipment for deep grain piles." Journal of Physics: Conference Series 2561, no. 1 (2023): 012011. http://dx.doi.org/10.1088/1742-6596/2561/1/012011.

Pełny tekst źródła

Streszczenie:

Abstract China is a large grain storage country, and at this stage, the effective storage capacity of the country has exceeded 900 million tonnes. Grain is subject to localized high temperatures, pests, and other abnormalities during storage. Therefore, regular quality checks need to be carried out on the grain, and cuttings are the first step in carrying out grain quality checks. The current domestic cutting equipment suffers from low cutting efficiency and high manual labor intensity, so the need to develop new cutting equipment is imminent. In response to the current problems with domestic

Style APA, Harvard, Vancouver, ISO itp.

3

DHANANJAY, GHOKALE, S. S. INAMDAR PROF., R. BODDU MANOJKUMAR, S. KOLHE NITIN, and H. BIRRU VAMSHIKRISHNA. "A STUDY ON AUTOMATIC PVC PIPE CUTTING." IJIERT - International Journal of Innovations in Engineering Research and Technology NITET-18 (March 17, 2018): 66. https://doi.org/10.5281/zenodo.1451617.

Pełny tekst źródła

Streszczenie:

<strong><strong> </strong>In the process of production of any components from steel bar stock,the preliminary process is that of cutting - of bar stock to length according to the finished size requirement of work piece. This process is normally done by an power hacksaw machine. The sequence of operation is as follows:1. Feed bar stock to stopper that is se t according to length of work piece to be cut. 2. Clamp the bar stock. 3. Feed the cutter blade to cut the required length. 4. Retract the cutter. 5. De - clamp the work piece ....procedure repeated. The above sequence if observed has t

Style APA, Harvard, Vancouver, ISO itp.

4

Pawar, Sanjivani. "Automatic Wire Cutting Machine." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 01 (2025): 1–9. https://doi.org/10.55041/ijsrem40803.

Pełny tekst źródła

Streszczenie:

The optimization of industrial processes through automation is essential for enhancing productivity and reducing operational expenses. Wire cutting and stripping, a fundamental operation across various industrial scales, is a prime candidate for such improvements. This project addresses the shortcomings of manual systems by designing and implementing an automated wire-cutting and stripping machine. Utilizing Fusion 360 for precise design and incorporating automation via an Arduino Uno microcontroller, the system achieves superior accuracy, reliability, and material efficiency. The adoption of

Style APA, Harvard, Vancouver, ISO itp.

5

Piyush.M.Sagore, Rohit.A.Pimpalghare, Sanket.S.Gahukar, and A.C.Waghmare. "Research and Design of Prototype Model for Pipe Cutting Rotating Machine." Research and Reviews: Journal of Mechanics and Machines 3, no. 2 (2021): 1–3. https://doi.org/10.5281/zenodo.5141398.

Pełny tekst źródła

Streszczenie:

<em>The Automatic system of process plays an important role in increasing the total productivity of any Industry. It is the electrically semi-automated, mechanically designed model of semi-automatic pipe cutting rotating machine. Our main aim is to increase the productivity by decreasing the electric use, cost and increase quality and quantity of production. Quality of production is improved by processing the manual cutting operation by semi-automated rotating cutting machine. Ensuring all the condition that the repeatability of the process with accuracy and precision. This ensures maximum eli

Style APA, Harvard, Vancouver, ISO itp.

6

kolte, Mr Tejal. "Automatic Sheet Cutter Drum for Sun Dry Mill Board." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 05 (2025): 1–9. https://doi.org/10.55041/ijsrem47050.

Pełny tekst źródła

Streszczenie:

Abstract -This project focuses on automating the cutting mechanism of a semi-automatic Sundry Board Machine used in cardboard manufacturing. The current system relies on manual intervention, causing inefficiencies and inconsistencies. The proposed solution replaces manual cutting with a fully automated process using an Arduino Mega 2560 microcontroller, pneumatic cylinders, photoelectric sensors, solenoid valves, and solid-state relays. A redesigned cutting drum and integrated air nozzles enable precise sheet cutting and transfer. The system includes a TFT display for user interaction and offe

Style APA, Harvard, Vancouver, ISO itp.

7

Аверченков, Андрей, Andrey Averchenkov, Евгений Кукло, and Evgeniy Kuklo. "Development of mathematical model prime cost milling operations optimization." Bulletin of Bryansk state technical university 2014, no. 2 (2014): 86–91. http://dx.doi.org/10.12737/23272.

Pełny tekst źródła

Streszczenie:

The automatic selection of cutting tools for efficient milling was issued. Mathematical modeling procedures and developing software modules for the automated selection of cutting tools were described.

Style APA, Harvard, Vancouver, ISO itp.

8

Nurisna, Zuhri. "MANUFACTURING SEMI AUTOMATIC HAKSAW." Jurnal Teknik Mesin 2, no. 1 (2023): 139–44. http://dx.doi.org/10.33795/jmeeg.v2i1.1845.

Pełny tekst źródła

Streszczenie:

Hacksaw is a saw that is used to cut metal objects such as iron. Hacksaws are still widely used for metal cutting processes because they have the advantage of not generating excessive heat during the cutting process which can affect the metal structure. Behind these advantages, cutting metal using a hacksaw manually is less efficient in time and the cutting results are less neat. The solution to this problem is to make a hacksaw with an electric motor drive. The design of this automatic hacksaw machine uses a drive in the form of an electric motor with a capacity of 0.5 HP. The output from the

Style APA, Harvard, Vancouver, ISO itp.

9

P, Manikandan, Krishnakanth K, and P. Mathan Kumar Prof. "Automatic PVC Pipe Cutting Machine." International Journal of Trend in Scientific Research and Development 2, no. 3 (2018): 245–48. https://doi.org/10.31142/ijtsrd10869.

Pełny tekst źródła

Streszczenie:

Pipe cutting operation plays the important role in pipe extruding industries. In small scale industries the pipe cutting operation in pipe extruding company is done by manual operation. During manual cutting the chip formation is high also there may be a chance of cross cutting of the pipe. These cross cutting occurs due to the tight holding of the pipe. Such that to avoid these kinds of difficulties the pipe cutting operation is done by pneumatically controlled systems. The working of the system is to carry out three processes feeding, clamping and then cutting. The main concern is to regulat

Style APA, Harvard, Vancouver, ISO itp.

10

Gahane, D. G., Prachi Katole, Priyanka Naidu, Ruchita Dhoke, and Sushama Kore. "AUTOMATIC PIPE-WIRE CUTTING MACHINE." International Journal of Engineering Applied Sciences and Technology 5, no. 1 (2020): 454–56. http://dx.doi.org/10.33564/ijeast.2020.v05i01.078.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Li, Ying Lin, Man Liang Qiu, and Lian He Yang. "Cutting Path Optimization of Pattern Pieces in Garment Automatic Cutter." Advanced Materials Research 129-131 (August 2010): 973–77. http://dx.doi.org/10.4028/www.scientific.net/amr.129-131.973.

Pełny tekst źródła

Streszczenie:

In view of the defect and shortage in cutting path automatic optimization of 2D pattern pieces in current garment automatic cutter, a new optimization method of computer is explored. If there is no cutting path optimization implemented by garment automatic cutter before cutting, some problems will be caused, such as too much unless travel and too long processing time. At present, both at home and abroad, the studies on automatic optimization in cutting preprocessing are relatively weak. According to the “segment cutting from left to right” feature of automatic cutter in cutting process, an alg

Style APA, Harvard, Vancouver, ISO itp.

12

Chen, Wang, and Zhou Jie. "New advances in automatic shearer cutting technology for thin seams in Chinese underground coal mines." Energy Exploration & Exploitation 40, no. 1 (2021): 3–16. http://dx.doi.org/10.1177/01445987211052060.

Pełny tekst źródła

Streszczenie:

Automatic mining technology is the ideal path and the inevitable way to improve production efficiency, reduce labour intensity and ensure safety for thin coal seam. Recently, while automatic mining technology is increasingly applied in China for thin seams, the corresponding automatic cutting technology has made new advances. Among them, mnemonic cutting technology has been fruitful industrial tested with suitable conditions. Simultaneously, another one called cutting trace pre-set technology of the shearer has been put forward. Using this method, the cutting trace in the area with coal thickn

Style APA, Harvard, Vancouver, ISO itp.

13

Jin, Ai Yan, and Xiao Mei Shang. "Feature Analysis and Extraction of the Garment Layout Planning." Advanced Materials Research 796 (September 2013): 439–42. http://dx.doi.org/10.4028/www.scientific.net/amr.796.439.

Pełny tekst źródła

Streszczenie:

Automatic cutting helps improve efficiency in modern garment production. The design of cutting Numerical Control System determines the speed and quality of cutting flow. The optimization of cutting path based on different marking project, which helps improve not only the efficiency but also the level of systematic intelligence. The optimization of automatic cutting path varies with different layout planning. The layout planning of style design is different, so the individual feature of automatic cutting movement is different. The difference reduces the efficiency of automatic cutting work. The

Style APA, Harvard, Vancouver, ISO itp.

14

Taravat, Alireza, Matthias Wagner, and Natascha Oppelt. "Automatic Grassland Cutting Status Detection in the Context of Spatiotemporal Sentinel-1 Imagery Analysis and Artificial Neural Networks." Remote Sensing 11, no. 6 (2019): 711. http://dx.doi.org/10.3390/rs11060711.

Pełny tekst źródła

Streszczenie:

Grassland contributes to carbon storage and animal feed production. Its yield is largely determined by the cutting times of grassland. Previous studies have used remote sensing data for grassland biomass estimation, but only a few studies have focused on SAR remote sensing approaches for automatic grassland cutting status detection. Due to the occurrence of multiple cuttings in a year, it is crucial to effectively monitor grassland cutting events in order to achieve accurate biomass estimations of a whole season. In this study, we examined the capabilities of multilayer perceptron neural netwo

Style APA, Harvard, Vancouver, ISO itp.

15

Shinde, Shubham D. "Solar Operated Automatic Grass Cutting Machine." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 2956–60. http://dx.doi.org/10.22214/ijraset.2021.35659.

Pełny tekst źródła

Streszczenie:

The grass cutting machine are very popular technology. A. The past technology models of grass cutter are used I.C engine and also used scissor for grass cutting. B. As the past technology of grass cutting machine was operated by manually, hence man power required is more. Also the time fuel required for accomplishing the work is more. C. To overcome such problems we used the solar power for drive the motors. And for reduce the manpower we control it by mobile and sensor. D. This proper purpose of solar operated automatic grass cutting machine is it will avoid the air and noise pollution and hi

Style APA, Harvard, Vancouver, ISO itp.

16

Cheluszka, Piotr. "Numerical Studies of the Dynamics of the Roadheader Equipped with an Automatic Control System during Cutting of Rocks with Different Mechanical Properties." Energies 14, no. 21 (2021): 7353. http://dx.doi.org/10.3390/en14217353.

Pełny tekst źródła

Streszczenie:

The process of cutting rocks with a boom-type roadheader results in extreme dynamic loads and vibrations. Mining, especially in the case of hard rocks, is associated with large energy consumption, which, when combined with low process efficiency, can lead to low drilling performance. These phenomena are undesirable because excessive dynamic load leads to low machine durability, as well as deterioration of work conditions and safety. Low mining efficiency affects the economics of mining works conducted using roadheaders. However, these adverse effects can be minimized by optimizing the cutting

Style APA, Harvard, Vancouver, ISO itp.

17

Ichikawa, Akihiko, Tamio Tanikawa, Satoshi Akagi, and Kohtaro Ohba. "Automatic Cell Cutting by High-Precision Microfluidic Control." Journal of Robotics and Mechatronics 23, no. 1 (2011): 13–18. http://dx.doi.org/10.20965/jrm.2011.p0013.

Pełny tekst źródła

Streszczenie:

We have developed automated cell cutting by highprecision microfluidic control using a high-response and high-precision syringe pump. A microfluidic chip containing 2 orthogonal microchannels was used for cutting animal cells softened by cytochalasin and aspirated and fixed in 1 microchannel, then a high-velocity microchannel flow was generated from another channel to cut the cell. To control microchannel flow precisely, we made a syringe pump with a minimum flow of 0.35 × 10-3µl/min and response time of 10 ms. The syringe pump was connected to the microfluidic chip by a thin, hard Teflon tube

Style APA, Harvard, Vancouver, ISO itp.

18

HAYASAKI, Hidehiko. "CAD/CAM integrated automatic cutting system." Journal of the Japan Welding Society 58, no. 4 (1989): 254–59. http://dx.doi.org/10.2207/qjjws1943.58.254.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Rahmawaty, Made, Rieke Yolanda, and Hendriko Hendriko. "DESIGN OF AUTOMATIC BREAD CUTTING MACHINE." AUSTENIT 15, no. 2 (2023): 79–86. http://dx.doi.org/10.53893/austenit.v15i2.6766.

Pełny tekst źródła

Streszczenie:

Before being marketed, white bread will usually be cut first. Small to medium scale bread entrepreneurs still use conventional tools in the form of standard bread knives, whose use is still less effective. This bread cutting machine is designed for small to medium sized bakers to make their work easier and more efficient. This machine is designed using a vertical blade movement method with an AC motor as the driving force and is controlled using a sequential circuit. The initial process of this machine is to press the pushbutton, then place the bread on the bread tray which has a proximity sen

Style APA, Harvard, Vancouver, ISO itp.

20

Raghuwanshi, Hemant Singh. "Design and Analysis of a Multiple Cutting Hacksaw Automatic Machine." International Journal of Trend in Scientific Research and Development Volume-3, Issue-2 (2019): 979–83. http://dx.doi.org/10.31142/ijtsrd21543.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Zubrzycki, Jarosław, Antoni Świć, and Victor Taranenko. "Mathematical Model of the Hole Drilling Process and Typical Automated Process of Designing Hole Drilling Operations." Applied Mechanics and Materials 282 (January 2013): 221–29. http://dx.doi.org/10.4028/www.scientific.net/amm.282.221.

Pełny tekst źródła

Streszczenie:

The paper is devoted to the mathematical modelling and optimal control of hole drilling. Drilling feed is considered as control action while the cutting force is controlled variable. Transfer functions of the regulators were obtained, with the cutting force variance being used as quality criterion for the automatic control system. In the article has been presented also, questions connected with the structure of typical automated process projecting of the hole drilling operation. The block pattern of the typical process automated projecting was introduced. The processed algorithms of setting of

Style APA, Harvard, Vancouver, ISO itp.

22

Wilkens, Gunter C., and John M. Kalogerakis. "The Automatic Cutting, Marking, and Processing of Structural Sections." Journal of Ship Production 4, no. 01 (1988): 1–10. http://dx.doi.org/10.5957/jsp.1988.4.1.1.

Pełny tekst źródła

Streszczenie:

Structural sections used in the offshore and shipbuilding industries require a wide range of cutouts, end-cut configurations and edge preparations. Such shapes are currently sketched, layed-off, and cut with manual and/or semi-automatic methods. This paper describes the development of a high-throughput automated (computer numerical control) shape cutting line that incorporates all of the activities from the planning stage through to the finished workpiece. For the more complex shapes, a flexible automation (robotic) cutting system is described that includes an off-line programming capability.

Style APA, Harvard, Vancouver, ISO itp.

23

Jaśkiewicz, Robert. "Implementation of Automatic Sample and Composite Element Cutting Technologies." Transactions on Aerospace Research 2018, no. 2 (2018): 24–33. http://dx.doi.org/10.2478/tar-2018-0013.

Pełny tekst źródła

Streszczenie:

Abstract The article presents the methodology of introducing automatic carbon fiber panel cutting technologies at the Composite Testing Laboratory of the Institute of Aviation. It describes the process of implementing the new cutting technology which boosts the efficiency of preparing composite samples for strength testing, with the requirements applicable to edge smoothness and dimension tolerances taken into consideration. It also reviews the literature concerned with three most popular composite material cutting methods: laser cutting, abrasive water jet cutting and machining, presenting th

Style APA, Harvard, Vancouver, ISO itp.

24

ЧУПРИНКА, ВІКТОР, та БОГДАН НАУМЕНКО. "ІНТЕРАКТИВНА ПОБУДОВА ТА КОРИГУВАННЯ РАЦІОНАЛЬНИХ СХЕМ РОЗКРОЮ НАТУРАЛЬНИХ МАТЕРІАЛІВ ЗІ СКЛАДНОЮ КОНФІГУРАЦІЄЮ ЗОВНІШНІХ КОНТУРІВ НА ДЕТАЛІ ГАЛАНТЕРЕЙНИХ ВИРОБІВ". Herald of Khmelnytskyi National University. Technical sciences 349, № 2 (2025): 466–73. https://doi.org/10.31891/2307-5732-2025-349-68.

Pełny tekst źródła

Streszczenie:

The paper considers one of the important tasks of automated design of rational schemes for cutting natural materials with a complex shape of the external contour on details of leather goods, namely the task of interactive construction and correction of rational schemes for cutting natural materials with a complex shape of the external contour on details of leather goods, designed in automatic mode. To successfully solve this problem, a technological and mathematical formulation of this problem is given. In the problem of interactive construction and correction of rational cutting schemes desig

Style APA, Harvard, Vancouver, ISO itp.

25

Yan, Changqing, Wenxiao Zhao, and Xinming Lu. "A Multi-Sensor Based Roadheader Positioning Model and Arbitrary Tunnel Cross Section Automatic Cutting." Sensors 19, no. 22 (2019): 4955. http://dx.doi.org/10.3390/s19224955.

Pełny tekst źródła

Streszczenie:

Autonomous posture detection and self-localization of roadheaders is the key to automatic tunneling and roadheader robotization. In this paper, a multi-sensor based positioning method, involving an inertial system for altitude angles measurement, total station for coordinate measurement, and sensors for measuring the real-time length of the hydraulic cylinder is presented for roadheader position measurement and posture detection. Based on this method, a positioning model for roadheader and cutter positioning is developed. Additionally, flexible trajectory planning methods are provided for auto

Style APA, Harvard, Vancouver, ISO itp.

26

Shishliannikov, Dmitrii I., and Mikhail G. Trifanov. "Improving the efficiency of heading and winning machines for potash ore extraction based on their drive load data." Izvestiya vysshikh uchebnykh zavedenii. Gornyi zhurnal 1, no. 3 (2021): 97–105. http://dx.doi.org/10.21440/0536-1028-2021-3-97-105.

Pełny tekst źródła

Streszczenie:

Introduction. The article considers the substantiation of rational parameters of potash rock mass fragmentation by the planetary disk cutting tools of heading and winning machines. The implementation of automatic planetary tool drives control systems is regarded as promising. The automatic drive control system allows maintaining the parameters of potash mass destruction in the ranges of rational values. ISSN 0536-1028 «Известия вузов. Горный журнал», № 3, 2021 105 Research methodology. The parameters of potash rock mass destruction by the cutters of planetary-disk cutting tools in modern combi

Style APA, Harvard, Vancouver, ISO itp.

27

Yang, Hui. "Research of Multifunctional Automatic Ground Cutting Machine." Advanced Materials Research 945-949 (June 2014): 298–300. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.298.

Pełny tekst źródła

Streszczenie:

based on the current market the present situation of the food processing machinery,developed a stranded multi-functional automatic cutting machine is a ground,shred,slice of function,and can realize automatic switching function

Style APA, Harvard, Vancouver, ISO itp.

28

Cheng, Guang Yao, Ping Ping Li, Zhen Qing Gao, and Lei Lei. "Key Technology Research on Intelligent CAPP System of Automatic Machine Process." Applied Mechanics and Materials 48-49 (February 2011): 649–55. http://dx.doi.org/10.4028/www.scientific.net/amm.48-49.649.

Pełny tekst źródła

Streszczenie:

The CAPP system architecture based on PDM was proposed to realize the integration of Information and function, which was built on the analysis for the processing characteristics of shaft parts of automatic machines. By proposing the multi-level parts feature information modeling and process feature information modeling, developing of automatic sequencing expert system for the shaft parts of automata, it typically realizes intelligent process planning, automatic confirming of cutting usages, automatic selection of technology resources and automatic calculation of cutting tools’ travel, working

Style APA, Harvard, Vancouver, ISO itp.

29

Чупринка, В. І., Г. Ю. Зелінський та Н. В. Чупринка. "МЕТОД АВТОМАТИЧНОГО ВИЗНАЧЕННЯ ПАРАМЕТРІВ ПРЯМОКУТНОЇ РЕШІТКИ ДЛЯ ПРОЕКТУВАННЯ СХЕМ РОЗКРОЮ ЛИСТОВИХ МАТЕРІАЛІВ". Bulletin of the Kyiv National University of Technologies and Design. Technical Science Series 120, № 2 (2018): 17–25. http://dx.doi.org/10.30857/1813-6796.2018.2.2.

Pełny tekst źródła

Streszczenie:

To develop a method for automatically determining the parameters of a rectangular grid for designing rational schemes for cutting sheet materials. The methods of analytical geometry and applied mathematics are used to determine the parameters of a rectangular lattice for the design of rational schemes for cutting sheet materials. In the paper, a method was proposed for automatically determining the parameters of a rectangular lattice for designing rational schemes for cutting sheet materials. A method is proposed for automatic determination of the parameters of a rectangular lattice, which is

Style APA, Harvard, Vancouver, ISO itp.

30

Ren, Xiao Ping, Zhan Qiang Liu, and Yi Wan. "A Computer-Based Intelligent System for Automatic Tool Selection." Materials Science Forum 723 (June 2012): 238–42. http://dx.doi.org/10.4028/www.scientific.net/msf.723.238.

Pełny tekst źródła

Streszczenie:

Tool selection is one of the most significant process considerations when deciding how a machined product will be manufactured. The tool selection activity is rooted in feature geometry but it also has a direct impact on machinability and machine tool performance. This paper presents a computer-based intelligent system for the automatic selection of cutting processes and tools. The main objective of the research work was to develop a procedure for the selection of cutting tools and cutting parameters. This will help the designers and manufacturing planners to select an optimal set of cutting t

Style APA, Harvard, Vancouver, ISO itp.

31

Freiberger, Stefan, Florian Ellert, and Max Weeber. "Energy Efficient Manufacturing of Lightweight Products Illustrated by a Structural Optimization of an Automatic Knife Cutting System." Applied Mechanics and Materials 655 (October 2014): 75–81. http://dx.doi.org/10.4028/www.scientific.net/amm.655.75.

Pełny tekst źródła

Streszczenie:

Due to the growing usage of industrial textiles (e.g. glass fiber, carbon fiber, aramid fiber) production sites in the automotive, aerospace, defense and wind power industry are equipped with automatic knife cutting systems. Energy efficient cutting is necessary to manufacture high quality and cost-competitive lightweight products. Therefore, the energy consumption of an automatic knife cutting system was analyzed in this paper using a flexible energy metering equipment. Based on the results different technical measures to reduce the energy consumption were developed and assessed for their eco

Style APA, Harvard, Vancouver, ISO itp.

32

Timiryazev, V. A., and M. Z. Khostikoev. "Automatic assessment of condition of cutting tools on multipurpose machining centers." Izvestiya MGTU MAMI 5, no. 1 (2011): 198–202. http://dx.doi.org/10.17816/2074-0530-69965.

Pełny tekst źródła

Streszczenie:

The article considers the problems of evaluation of operability of cutting tools, used for multipurpose machining centers. The use of such systems allows to make automatic replacement of the cutting tool in proper time, ensuring the implementation of an automatic cycle of the machine.

Style APA, Harvard, Vancouver, ISO itp.

33

C, Manimaran. "Automatic Node Cutting and Planting of Sugarcane." International Journal for Research in Applied Science and Engineering Technology 7, no. 4 (2019): 3038–41. http://dx.doi.org/10.22214/ijraset.2019.4509.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Petrak, Slavenka, and Dubravko Rogale. "Methods of automatic computerised cutting pattern construction." International Journal of Clothing Science and Technology 13, no. 3/4 (2001): 228–39. http://dx.doi.org/10.1108/09556220110396542.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Feng, Shu Min. "Design and Implementation of the Working Order for a PLC Controlled Terminal Cutting Machine." Applied Mechanics and Materials 121-126 (October 2011): 768–72. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.768.

Pełny tekst źródła

Streszczenie:

Terminal cutting machine is an automatic device that can realize automatic feeding, bending, cutting the middle carry, shearing. It can be easily integrated with other automatic devices to form a whole production line. In this paper, the cam mechanism is used to realize bending and cutting the middle carry, hydraulic drive structure is used to realize terminal feeding and cutting. A reasonable working time sequence among various processes is necessary to ensure the right working order and avoid the interference. The point of the control is to know which processing step it is by using photoelec

Style APA, Harvard, Vancouver, ISO itp.

36

Krasner, S. Y., and Y. V. Novikov. "A Study of Parameters of the Sewing Thread Cutting Process." Proceedings of Higher Educational Institutions. Маchine Building, no. 10 (727) (November 2020): 3–12. http://dx.doi.org/10.18698/0536-1044-2020-10-3-12.

Pełny tekst źródła

Streszczenie:

Sewing thread cutting processes are widely used in semi-automatic machines in the garment industry. The lack of scientifically justified methods for designing mechanisms for thread trimming in semi-automatic sewing machines makes studying these processes a topical issue. There are works that examine cutting free-hanging yarn using scissors. However, these results cannot be used to develop mechanisms for thread trimming in semi-automatic sewing machines for the following reasons: the properties of free-hanging yarn and sewing thread vary significantly, and the cutting conditions for the thread

Style APA, Harvard, Vancouver, ISO itp.

37

Sun, Qun, Dongjie Zhao, Chong Wang, and Ying Zhao. "Design of a Sapling Branch Grafting Robot." Journal of Robotics 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/604746.

Pełny tekst źródła

Streszczenie:

The automatic sapling grafting methods and grafting robot technologies are not comprehensively studied despite the fact that they are urgently required in practice. For this reason, a sapling grafting robot is developed to implement automatic grafting for saplings. The developed grafting robot includes clipping mechanism, moving mechanism, cutting mechanism, binding mechanism, and Arduino MCU based control system, which is capable of clipping, moving, positioning, cutting, grafting, and binding saplings. Experiments show that the stock cutting efficiency is 98.4%, the scion cutting efficiency

Style APA, Harvard, Vancouver, ISO itp.

38

Munzinger, Christian, Jürgen Fleischer, Gregor Stengel, and Markus Schneider. "Accuracy of a Flying Cutting Device." Advanced Materials Research 43 (April 2008): 23–36. http://dx.doi.org/10.4028/www.scientific.net/amr.43.23.

Pełny tekst źródła

Streszczenie:

The prototype for the flying cutting of spatially curved extrusion profiles developed as part of the Collaborative Research Center Transregio 10 (SFB/TR 10) was tested as an integrated part of the overall system in first test runs. The profiles resulting from this process give proof of the potential involved in both, the novel curved profile extrusion (CPE) and the automatic supporting and cutting device. For subsequent automated processing to become possible, however, the reliably achievable accuracy of extruded profiles needs to be further improved. By the example of the extruded profiles pr

Style APA, Harvard, Vancouver, ISO itp.

39

Panjaitan, David, Jotje Rantung, and Romels Lumintang. "RANCANG BANGUN SISTEM FEEDING MATERIAL KERJA OTOMAT PADA MESIN GERINDA POTONG ELEKTRO-PNEUMATIK." Jurnal Poros Teknik Mesin UNSRAT 13, no. 1 (2024): 38–48. http://dx.doi.org/10.35793/jptmu.v13i1.57191.

Pełny tekst źródła

Streszczenie:

The electro-pneumatic cutting grinding machine at the Mechanical Engineering Laboratory of UNSRAT Manado is used to insert the workpiece to be cut off at this present time, it still used manually or still requires human hands to work out, this makes the cutting process require a longer time, moreover, reducing the efficiency of time. Based on this case, this research conducts sustainable production technology and designs to makes an automatic work material feeding system on an electro-pneumatic cutting grinding machine. This study aims to design, as well as create a feeding system for automati

Style APA, Harvard, Vancouver, ISO itp.

40

Gondkar, Prof V. S., Rutuja Mane, Aishwarya Ghorpade, et al. "Design and Development of Automatic Lamination Cutting Machine." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 2034–40. http://dx.doi.org/10.22214/ijraset.2022.41683.

Pełny tekst źródła

Streszczenie:

Abstract: In this project of “Low-cost automatic laminated paper sheet cutting machine” we made a real time machine for paper sheet cutting purpose in very low cost and having higher efficiency than manual work. This model is simplified according to our convenience while manufacturing ease and cost estimation. The main purpose of this model is to reduce cost and time of cutting operation. Here in this we have used pneumatic method to cut the laminated sheet. Here the cutting wheel will give a point cut to laminated sheet and due to pressure applied by rollers the sheet will cut automatically i

Style APA, Harvard, Vancouver, ISO itp.

41

Gondkar, Prof V. S., Rutuja Mane, Aishwarya Ghorpade, et al. "Design and Development of Automatic Lamination Cutting Machine." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 2034–40. http://dx.doi.org/10.22214/ijraset.2022.41683.

Pełny tekst źródła

Streszczenie:

Abstract: In this project of “Low-cost automatic laminated paper sheet cutting machine” we made a real time machine for paper sheet cutting purpose in very low cost and having higher efficiency than manual work. This model is simplified according to our convenience while manufacturing ease and cost estimation. The main purpose of this model is to reduce cost and time of cutting operation. Here in this we have used pneumatic method to cut the laminated sheet. Here the cutting wheel will give a point cut to laminated sheet and due to pressure applied by rollers the sheet will cut automatically i

Style APA, Harvard, Vancouver, ISO itp.

42

Lim, Eun Seong, Hwang Jin Son, Young Tae Cho, and Yoon Gyo Jung. "Determination of the Cutting Area Considering the Tool Slenderness Ratio for the Development of a 5-Axis Impeller Machining Automation CAM Module." Advanced Materials Research 652-654 (January 2013): 2178–82. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.2178.

Pełny tekst źródła

Streszczenie:

The efficiency of applying 5-axis machining is higher for various products compared to general 3-axis machining, which is restricted to general parts and mold machining. However, impeller machining requires a large tool slenderness ratio to avoid interference with neighboring surfaces. Because such an enlargement of the slenderness ratio causes damage to the tools and deterioration of the quality of products due to the vibration of the tool, it is important to review the cutting characteristics considering the slenderness ratio and to determine the proper cutting conditions. Also, industry has

Style APA, Harvard, Vancouver, ISO itp.

43

Wang, Xu, Hongjie Liu, Pengfei Wang, Long Gao, and Xin Yang. "Apple Rootstock Cutting Drought-Stress-Monitoring Model Based on IMYOLOv11n-Seg." Agriculture 15, no. 15 (2025): 1598. https://doi.org/10.3390/agriculture15151598.

Pełny tekst źródła

Streszczenie:

To ensure the normal water status of apple rootstock softwood cuttings during the initial stage of cutting, a drought stress monitoring model was designed. The model is optimized based on the YOLOv11n-seg instance segmentation model, using the leaf curl degree of cuttings as the classification basis for drought-stress grades. The backbone structure of the IMYOLOv11n-seg model is improved by the C3K2_CMUNeXt module and the multi-head self-attention (MHSA) mechanism module. The neck part is optimized by the KFHA module (Kalman filter and Hungarian algorithm model), and the head part enhances pos

Style APA, Harvard, Vancouver, ISO itp.

44

Sui, Xiu Hua, De Jun Miao, and Zheng Mao Feng. "Design and Analysis of Automatic Cutting Robot for Vertical-Pull Glass Pipe." Advanced Materials Research 139-141 (October 2010): 1597–600. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1597.

Pełny tekst źródła

Streszczenie:

By study on the current domestic cutting technics of vertical-pull glass pipe, in this paper a new and practical design of automatic cutting robot is peoposed. Its motion process is introduced on the basis of performance requirement, and then the overall structure of automatic cutting robot for vertical-pull glass pipe is designed, especially the electro-hydraulic proportional control systems for frame rotation and fuselage lifting. Meanwhile the stability and respond speed of hydraulic systems is well analyzed with matlab software. The results of open-loop bode diagram of the frame rotation s

Style APA, Harvard, Vancouver, ISO itp.

45

Senin, Nor’ain. "Automatic Meat Slicing Machine." Journal of Engineering and Science Research 2, no. 5 (2018): 49–54. http://dx.doi.org/10.26666/rmp.jesr.2018.5.9.

Pełny tekst źródła

Streszczenie:

A new innovation has been created which is called AUTOMATIC MEAT SLICING (AMS) MACHINE. The main purpose of the machine creation is to replace the old-style method in slicing the chicken meat to modern method. BABARITTOS DELIGHT supplies Tortillas Wrap to the latest trend of Food & Beverage (F&B) business called Food Truck. The main ingredient of Burritos is slices of boneless chicken meat, where each slice is approximately has to be 5 mm thick. Formerly, the slicing procedure used a normal cutting knife and its production rate was truncated as the demands of the Burritos are going hig

Style APA, Harvard, Vancouver, ISO itp.

46

Myasnikova, Lyubov, and Anna Kameneva. "Development of a complex of control and measuring procedures for parts with high-precision surfaces on CNC machines." Science intensive technologies in mechanical engineering 2022, no. 11 (2022): 32–38. http://dx.doi.org/10.30987/2223-4608-2022-11-32-38.

Pełny tekst źródła

Streszczenie:

The article is devoted to the development of solutions to improve the efficiency of the cutting process by using the capabilities of modern automated equipment with numerical control (CNC) and the use of these solutions for the introduction of a rational technological process in production. The processing of parts on CNC machines with automatic correction of cutting tools for surfaces with tight tolerances is considered. The method of using a complex of control and measuring procedures in the technological preparation of production on CNC machines is given. An enlarged algorithm for processing

Style APA, Harvard, Vancouver, ISO itp.

47

Zhang, Jin Lan, and Qian Lv. "Automatic Control System of Stone Sawing Machine Based on PLC and Human-Computer Interface." Applied Mechanics and Materials 278-280 (January 2013): 1417–22. http://dx.doi.org/10.4028/www.scientific.net/amm.278-280.1417.

Pełny tekst źródła

Streszczenie:

This paper designs a PLC automatic control system in stone cutting. The author elaborated the stone cutting process, the system hardware/software design and the human-machine interface design process. This system is the collection of PLC, sensing detection, frequency converter, configuration control technology and advanced stone cutting process in an organic whole. The author designed optional automatic/manual function and parameters setting screen. The author added limit current protection and position protection, and designed function of automatic detecting cooling water shortage to protect

Style APA, Harvard, Vancouver, ISO itp.

48

Yermakov, Serhii, Taras Hutsol, Oleh Ovcharuk, and Iryna Kolosiuk. "Mathematic simulation of cutting unloading from the bunker." Independent Journal of Management & Production 10, no. 7 (2019): 758. http://dx.doi.org/10.14807/ijmp.v10i7.909.

Pełny tekst źródła

Streszczenie:

The peculiarities of cutting movement at unloading them from the hopper are described. The analysis of the scientific researches on bulk materials movement and bridging is given. To develop the mathematical model of cutting unloading the layer should be described as a pseudoliquid, that consists of discrete components (cuttings) and gaseous medium (air). The Navier-Stokes equation can be applied to the process of cutting unloading and velocity field. The equation of pseudoliquid motion is a nonlinear integral and differential equation. The initial and boundary conditions for speed of cutting m

Style APA, Harvard, Vancouver, ISO itp.

49

Phung, Xuan Lan, Hoanh Son Truong, and Ngoc Tam Bui. "Expert System Based on Integrated Fuzzy AHP for Automatic Cutting Tool Selection." Applied Sciences 9, no. 20 (2019): 4308. http://dx.doi.org/10.3390/app9204308.

Pełny tekst źródła

Streszczenie:

Cutting tool selection plays an important role in achieving reliable quality and high productivity work, and for controlling the total cost of manufacturing. However, it is complicated for process planners to choose the optimal cutting tool when faced with the choice of multiple cutting tools, multiple conflict criteria, and uncertain information. This paper presents an effective method for automatically selecting a cutting tool based on the machining feature characteristics. The optimal cutting tool type is first selected using a proposed multicriteria decision-making method with integrated f

Style APA, Harvard, Vancouver, ISO itp.

50

Xie, Shengrong, Xiaoyu Wu, Dongdong Chen, et al. "Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study." Advances in Materials Science and Engineering 2019 (December 27, 2019): 1–13. http://dx.doi.org/10.1155/2019/8736103.

Pełny tekst źródła

Streszczenie:

Automatic roadways on gob-side entry retaining with no-pillars are used for longwall mining technology. The mining technology with no-pillars can recover coal pillar resources and reduce the amount and cost of roadway excavations. Automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is adopted for the condition of thick immediate roof and medium-thick coal seam mining, cutting off the immediate roof and the main roof on the gob by combined support. The fractured roof forms gangue blocks to fill the gob and loads the overlying strata. Th

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!