Zaloguj się

Gotowe bibliografie tematyczne / Electrical Power; Switching; Safety / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Electrical Power; Switching; Safety.

Rozprawy doktorskie na temat „Electrical Power; Switching; Safety”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Electrical Power; Switching; Safety”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Sanders, Seth Robert. "Nonlinear control of switching power converters." Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/14426.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Tran, Christine H. (Christine Ha) 1978. "Incremental switching factor calculation for power estimation." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/86846.

Pełny tekst źródła

Streszczenie:

Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.<br>Includes bibliographical references (p. 99-100).<br>by Christine H. Tran.<br>M.Eng.

Style APA, Harvard, Vancouver, ISO itp.

3

Maksimcev, Mirko D. "Energy considerations in power system damping by reactorcapacitor switching." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=23370.

Pełny tekst źródła

Streszczenie:

Flexible AC transmission systems (FACTS) technology is an emerging new technology which can be efficiently used in power system damping. Objectives of this study are the considerations of the energy flow involved in power system damping by functional switching of series capacitors and/or reactors. The principal questions are how the energy transiently flows through the network and what is its impact on damping of mechanical oscillations.<br>The analytical studies (covered in Chapter 1) reveal that the magnetic and electrostatic energy are constantly stored in the reactive components of the tra

Style APA, Harvard, Vancouver, ISO itp.

4

Spaulding, Jonathon David. "Power supply switching for a mm-wave asymmetric multilevel outphasing power amplifier system." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62479.

Pełny tekst źródła

Streszczenie:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.<br>Cataloged from PDF version of thesis.<br>This thesis demonstrates power switches to be used in our new Asymmetric Multilevel Outphasing (AMO) transmitter architecture at mm-wave frequencies. The AMO topology breaks the linearity vs. efficiency design objective in radio frequency power amplifiers (PAs) which has until now appeared to be fundamental. These power switches allow for the modulation of the PA supply rail between four discrete levels at a maximum sampling rate of 2

Style APA, Harvard, Vancouver, ISO itp.

5

Päivänsäde, V. (Ville). "Dynamic power estimation with a hardware emulation acquired switching activity model." Master's thesis, University of Oulu, 2016. http://urn.fi/URN:NBN:fi:oulu-201609082736.

Pełny tekst źródła

Streszczenie:

This thesis is a study of dynamic power estimation at register-transfer level using an activity model acquired with a hardware emulator. The thesis consists of a practical part that presents the studied flow and the testing work related to it and a theory part that supports the topics of the practical part. In the theory part, the common sources of power consumption in complementary metal-oxide-semiconductor logic are studied, along with brief introductions about their reduction techniques. The electronic design automation tool methodologies, commonly used for power estimation and analysis, ar

Style APA, Harvard, Vancouver, ISO itp.

6

Adamson, Jesse Timothy. "Pulse Density Modulated Soft Switching Cycloconverter." DigitalCommons@CalPoly, 2010. https://digitalcommons.calpoly.edu/theses/315.

Pełny tekst źródła

Streszczenie:

Single stage cycloconverters generally incorporate hard switching at turn on and soft switching at turn off. This hard switching at turn on combined with the slow switching speeds of thyristors (the switch of choice for standard cycloconverters) limits their use to lower frequency applications. This thesis explores the analysis and design of a pulse density modulated (PDM), soft switching cycloconverter. Unlike standard cycloconverters, the controller in this converter does not adjust thyristor firing angles. It lets only complete half cycles of the input waveform through to the output. This a

Style APA, Harvard, Vancouver, ISO itp.

7

Farkas, Thomas. "A scientific approach to EMI reduction in switching power supplies." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/35360.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Goree, Adam Tracker. "Grounding design for personal safety of a large scale wind power plant." Thesis, Colorado School of Mines, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10164243.

Pełny tekst źródła

Streszczenie:

<p> Grounding of electrical power systems has and will always be one of the most essential aspects of any electrical system design. Without a proper, well designed and effective efficient grounding network personal safety is at risk, equipment protection cannot be assured, and proper system operation cannot be maintained. Because of these reasons grounding design has become well researched, with long established standards strictly dictating the construction and integration of such ground networks. However with an ever diversifying power grid generation mix, integration of new technologies has

Style APA, Harvard, Vancouver, ISO itp.

9

Lok, Io Keong. "Study of soft-switching techniques on three-level three-phase four-wire active power filters." Thesis, University of Macau, 2010. http://umaclib3.umac.mo/record=b2493512.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Westmoreland, Martin. "Development of a fault tolerant MOS field effect power semiconductor switching transistor." Thesis, University of Warwick, 2012. http://wrap.warwick.ac.uk/55310/.

Pełny tekst źródła

Streszczenie:

This work describes the development of a semiconductor switch to replace an electromechanical contactor as used within the electrical power distribution system of the More Electric Aircraft (MEA; a project begun in the 1990‟s by the United States Air Force). The MEA is safety critical and therefore requires highest reliability components and systems, but subsequent to a short circuit load fault the electro-mechanical contactor switch often welds shut. This risk is increased when using high discharge energy lithium ion dc batteries. Predominately the semiconductor switch controls inductive load

Style APA, Harvard, Vancouver, ISO itp.

11

Singh, Manmeet. "Switching Power Converter Techniques for Server and Mobile Applications." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu159486698396321.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Sfakianakis, Konstantinos. "Design for safety and energy efficiency of electrical power systems in ships." Thesis, University of Strathclyde, 2016. http://digitool.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=27571.

Pełny tekst źródła

Streszczenie:

The ever-growing intercontinental maritime trade and transporthave identified the need for the ship and passengerssafety, energy efficiency and environmental pollution to be considered as dominant issues within shipping industry and academia. Recently introduced safety regulations, known as Safe-Return-to-Port, and ‘green’ regulations, by the IMO, came into force to address and, indirectly, couple the above objectives through the enforcement of specific safety performance requirements of ship systems after a casualty and mandatory environmental measures for GHG emissions limitation, for the fo

Style APA, Harvard, Vancouver, ISO itp.

13

Dal, Deniz. "Power Islands a high-level synthesis methodology for reducing spurious switching activity and leakage /." Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2006. http://proquest.umi.com/login?COPT=REJTPTU0NWQmSU5UPTAmVkVSPTI=&clientId=3739.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Tsai, Kaichien. "EMI Modeling and Characterization for Ultra-Fast Switching Power Circuit Based on SiC and GaN Devices." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1385983252.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Weber, Alexis Christian 1974. "MEMS relays for make-break power switching applications : {111} silicon etched planar electrical contacts." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/46497.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.<br>Includes bibliographical references (p. 193-200).<br>Relays and switches are of interest in applications such as test equipment, radar, communications, and power systems, amongst others. Unlike solid state switches, mechanical relays provide galvanic isolation across the power ports. This characteristic is important because, for safety reasons, electrical codes stipulate that loads in certain power applications must be disconnected by open gaps. This requirement imposes significant isolation, heat

Style APA, Harvard, Vancouver, ISO itp.

16

Chen, Zheng. "Electrical Integration of SiC Power Devices for High-Power-Density Applications." Diss., Virginia Tech, 2013. http://hdl.handle.net/10919/23923.

Pełny tekst źródła

Streszczenie:

The trend of electrification in transportation applications has led to the fast development of high-power-density power electronics converters. High-switching-frequency and high-temperature operations are the two key factors towards this target. Both requirements, however, are challenging the fundamental limit of silicon (Si) based devices. The emerging wide-bandgap, silicon carbide (SiC) power devices have become the promising solution to meet these requirements. With these advanced devices, the technology barrier has now moved to the compatible integration technology that can make the best o

Style APA, Harvard, Vancouver, ISO itp.

17

Doddapaneni, Venkatesh. "On the polymer-based nanocomposites for electrical switching applications." Doctoral thesis, KTH, Tillämpad fysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-202702.

Pełny tekst źródła

Streszczenie:

Recent research demonstrated that polymer based nanocomposites (PNCs) have been engineered in order to improve the arc interruption capability of the circuit breakers. PNCs are the combination of nano-sized inorganic nanoparticles (NPs) and polymers, opened up new developments in materials science and engineering applications. Inorganic NPs are selected based on their physical and chemical properties which could make multifunctional PNCs in order to interrupt the electrical arcs effectively. In particular, we presented the PNCs fabricated by using CuO, Fe3O4, ZnO and Au NPs in a poly (methyl m

Style APA, Harvard, Vancouver, ISO itp.

18

Sharifnia, Hamidreza. "Safety related model and studies of Trojan Nuclear Power Plant electrical distribution system." PDXScholar, 1988. https://pdxscholar.library.pdx.edu/open_access_etds/3875.

Pełny tekst źródła

Streszczenie:

The most important requirement for running a nuclear power plant safely is having a reliable safety system, especially during the emergency shutdown condition. For performing a scrutiny load flow and voltage drop study a detailed and comprehensive electrical model for the emergency electrical distribution system of the Trojan Nuclear Power Plant has been developed. This model includes the representation of the transformers, circuit breakers, motors, cables and load data from 4160 volts level down to the individual 480 volts loads.

Style APA, Harvard, Vancouver, ISO itp.

19

Jeong, Timothy. "Zero Voltage Switching Hybrid Voltage Divider Converter." DigitalCommons@CalPoly, 2021. https://digitalcommons.calpoly.edu/theses/2290.

Pełny tekst źródła

Streszczenie:

This project proposes a new hybrid voltage divider DC-DC converter that utilizes switching capacitors and inductors to produce zero voltage switching (ZVS) at the turn on state of its switches. By achieving ZVS, the switching losses are significantly reduced; thus, increasing the overall efficiency of the converter at various loads. The goal for this thesis is to perform analysis of the operation of the converter, derive equations for sizing the main components, and demonstrate its functionality through computer simulation and hardware prototype. Results of the simulation and hardware testing

Style APA, Harvard, Vancouver, ISO itp.

20

Oshaben, Edward J. "DC-DC Power Converter Design for Application in Welding Power Source for the Retail Market." Cleveland State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=csu1296178360.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Gilleran, Sean. "Online Regime Switching Vector Autoregression Incorporating Spatio-temporal Aspects for Short Term Wind Power Forecasting." Thesis, KTH, Elkraftteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-217117.

Pełny tekst źródła

Streszczenie:

This master thesis examines short term wind power forecasting time series models focusing on regimes conditioned to meteorological conditions and the incorporation of spatio-temporal aspects. Novel regime switching autoregressive and vector autoregressive models are proposed, implemented in a .NET framework, and evaluated. The vector autoregressive framework takes advantage of cross-correlation between sites incorporating upstream online production information from all wind farms within a given region. The regimes are formed using K-means clustering based on forecast meteorological conditions.

Style APA, Harvard, Vancouver, ISO itp.

22

Zhan, Ming Hui. "Analysis and evaluation of soft-switching techniques for 3-phase 4-wire shunt power quality compensators." Thesis, University of Macau, 2006. http://umaclib3.umac.mo/record=b1678022.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Danekar, Abhishek V. "Analysis and Design of High-Frequency Soft-Switching DC-DC Converter for Wireless Power Charging Applications." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1493990400812363.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Frykman, Daniel, and Henrik Wemmersten. "Automation of Electrical Fault Induction for Safety Testing of the Power Train Software in Heavy Vehicles." Thesis, KTH, Maskinkonstruktion (Inst.), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-141656.

Pełny tekst źródła

Streszczenie:

En av de främsta prioriteringarna vid utveckling av mjukvara till tunga lastbilar på Scania är att verifiera att lastbilens beteende är säkert. Således spenderas mycket tid på säkerhetstester vars syfte är att verifiera att ny mjukvara inte medför säkerhetskritiska förändringar i fordonets beteende. De säkerhetstester som behandlas i rapporten testar beteendet av mjukvaran i motorns styrenhet när den utsätts för elektriska fel. Bakgrunden till varför säkerhetstesterna genomförs beskrivs i ett säkerhetskritiskt och juridiskt perspektiv samt vilken testmetodik som används. Dessutom tydliggörs vi

Style APA, Harvard, Vancouver, ISO itp.

25

Mupparty, Durga Bhavani. "CAPACITOR SWITCHING TRANSIENT MODELING AND ANALYSIS ON AN ELECTRICAL UTILITY DISTRIBUTION SYSTEM USING SIMULINK SOFTWARE." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_theses/82.

Pełny tekst źródła

Streszczenie:

The quality of electric power has been a constant topic of study, mainly because inherent problems to it can bring great economic losses in industrial processes. Among the factors that affect power quality, those related to transients originated from capacitor bank switching in the primary distribution systems must be highlighted. In this thesis, the characteristics of the transients resulting from the switching of utility capacitor banks are analyzed, as well as factors that influence there intensities. A practical application of synchronous closing to reduce capacitor bank switching transien

Style APA, Harvard, Vancouver, ISO itp.

26

Zackiewicz, Curt Stephen. "DC-DC Power Converter Design for a Portable Affordable Welder System (PAWS)." Wright State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=wright1300807818.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Kulisek, Jonathan Andrew. "The Effects of Nuclear Radiation on Schottky Power Diodes and Power MOSFETs." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1267502877.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Sanaboyina, Ram Mohan. "Test Plan for Real-Time Modeling & Simulation of Single Pole Switching Relays." ScholarWorks@UNO, 2016. http://scholarworks.uno.edu/td/2215.

Pełny tekst źródła

Streszczenie:

A real-time simulator (RTS) with digital and analog input/output modules is used to conduct hardware-in-the-loop simulations to evaluate performance of power system equipment such as protective relays by exposing the equipment to the simulated realistic operating conditions. This work investigates the use of RTS to test relays with single-pole-switching (SPS) feature. Single-pole switching can cause misoperations due to fault arc during reclosing of the breakers. Through this investigation, a test procedure appropriate for the testing SPS relays has been developed. The test procedure includes

Style APA, Harvard, Vancouver, ISO itp.

29

Fox, Ian Micah. "Design and Applications of Hybrid Switches in DC-AC Power Converter Topologies." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1543157006458193.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Kumar, Amit. "Generation of compact test sets and a design for the generation of tests with low switching activity." Diss., University of Iowa, 2014. https://ir.uiowa.edu/etd/1476.

Pełny tekst źródła

Streszczenie:

Test generation procedures for large VLSI designs are required to achieve close to 100% fault coverage using a small number of tests. They also must accommodate on-chip test compression circuits which are widely used in modern designs. To obtain test sets with small sizes one could use extra hardware such as test points or use software techniques. An important aspects impacting test generation is the number of specified positions, which facilitate the encoding of test cubes when using test compression logic. Fortuitous detection or generation of tests such that they facilitate detection of yet

Style APA, Harvard, Vancouver, ISO itp.

31

Jedi, Hur. "Resonant Gate-Drive Circuits for High-Frequency Power Converters." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1546870469456974.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Bianchi, Jeramie Seth. "Bridgeless Active Power Factor Correction Using a Current Fed Push Pull Converter." DigitalCommons@CalPoly, 2011. https://digitalcommons.calpoly.edu/theses/544.

Pełny tekst źródła

Streszczenie:

ABSTRACT Bridgeless Active Power Factor Correction Using a Current Fed Push Pull Converter Jeramie Seth Bianchi Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus el

Style APA, Harvard, Vancouver, ISO itp.

33

Loh, Poh Chiang 1973. "A universal flux/charge modulation strategy for three-phase power electronic converters." Monash University, Dept. of Electrical and Computer Systems Engineering, 2002. http://arrow.monash.edu.au/hdl/1959.1/8087.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Assefa, Hana Yohannes. "Stability Investigation of an Advanced Electrical Rail Vehicle : Investigation of the Effect of Nonlinearity Introduced by a Switching Model of an Advanced Electrical Rail Vehicle on the General Performance and The Stability Limits." Thesis, Norwegian University of Science and Technology, Department of Electrical Power Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9094.

Pełny tekst źródła

Streszczenie:

<p>Reducing grid harmonics and increasing grid stability are both major issues for the operation of rail vehicles. For stability investigation of complex power systems, simplified system models are in need in order to reduce the model complexity and the simulation time. In this thesis work the effect of modelling a voltage source converter (VSC) for traction power system with and without the detailed pulse width modulated (PWM)-switch model is modeled. Effect of different operating conditions for the switching model on the harmonic content of the system is also analyzed. The same disturbanc

Style APA, Harvard, Vancouver, ISO itp.

35

Ahmed, Muhammad Swilam Abdelhaleem. "Highly-efficient Low-Noise Buck Converters for Low-Power Microcontrollers." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1542277717997166.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Sedele, Serkan Paki. "A Novel Approach For Synthesising Sinus Waveforms At Power Level." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12604723/index.pdf.

Pełny tekst źródła

Streszczenie:

In variable speed motor drive and uninterruptible power supply (UPS) applications, taditional method is to employ some kind of a modulation technique at a high frequency typically 6 kHz to 20 kHz range. In these modulation techniques, the switches are hard switched. The result is application of a series of pulses to the load, and if the load is inductive, sine wave current flows into the load. Hard and rapid switching causes a voltage waveform with a very high dv/dt (rate of change in voltage) causing high EMI problems, reduced life expectancy of the motor and additional losses. So a power sup

Style APA, Harvard, Vancouver, ISO itp.

37

Felicetti, Roberto. "Voltage Transients in the Field Winding of Salient Pole Wound Synchronous Machines : Implications from fast switching power electronics." Licentiate thesis, Uppsala universitet, Elektricitetslära, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-434652.

Pełny tekst źródła

Streszczenie:

Wound Field Synchronous Generators provide more than 95% of the electricity need worldwide. Their primacy in electricity production is due to ease of voltage regulation, performed by simply adjusting the direct current intensity in their rotor winding. Nevertheless, the rapid progress of power electronics devices enables new possibilities for alternating current add-ins in a more than a century long DC dominated technology. Damping the rotor oscillations with less energy loss than before, reducing the wear of the bearings by actively compensating for the mechanic unbalance of the rotating part

Style APA, Harvard, Vancouver, ISO itp.

38

Basar, Joseph James. "Improvement of Ground-Fault Relaying Selectivity through the Application of Directional Relays to High-Voltage Longwall Mining Systems." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/9888.

Pełny tekst źródła

Streszczenie:

The continuing trend toward larger longwall mining systems has resulted in the utilization of higher system voltages. The increase in system voltage levels has caused the industry to face complexities not experienced with the lower-voltage systems. One such complexity arises from the larger system capacitance that results from the outby configuration commonly used on 4,160-V longwall power systems. Simulations show that during a line-to-ground fault, the larger system capacitance can cause a situation where the ground current sensed by the ground-fault relays in unfaulted circuits is greater t

Style APA, Harvard, Vancouver, ISO itp.

39

Upadhyay, Abhishek Kumar. "A GENERALIZED CONTROL METHOD FOR CONSTANT SWITCHING FREQUENCY THREE PHASE PWM BOOST RECTIFIER UNDER EXTREME UNBALANCED OPERATION CONDITION." Cleveland State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=csu1449719352.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Uslu, Mutlu. "Analysis, Design, And Implementation Of A 5 Kw Zero Voltage Switching Phase-shifted Full-bridge Dc/dc Converter Based Power Supply For Arc Welding Machines." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/3/12607873/index.pdf.

Pełny tekst źródła

Streszczenie:

Modern arc welding machines utilize controllable high frequency DC/DC power supply with high dynamic and steady state current regulation performance. In the design robustness, small size and low weight, low complexity, and high efficiency are the defining criteria. The most suitable approach for a 5 kW arc welding machine power supply application is the high frequency Full-Bridge Phase-Shifted Zero Voltage Switching (FB-PS-ZVS) DC/DC converter with an isolation transformer. This converter not only gives the advantage of zero voltage switching for a wide load current range, it also provides red

Style APA, Harvard, Vancouver, ISO itp.

41

Beltrame, Rafael Concatto. "Metodologia de síntese de topologias ZVT simplificadas aplicadas a pólos PWM bidirecionais." Universidade Federal de Santa Maria, 2009. http://repositorio.ufsm.br/handle/1/8476.

Pełny tekst źródła

Streszczenie:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior<br>Among the soft-switching techniques, the zero-voltage-transition (ZVT) technique has been accepted well by the industry due its attractive characteristics, such as simplicity, low losses in the auxiliary commutation circuit (ACC), operation with soft-switching for a wide load range, and closest operation to the PWM converter counterpart. In three-phase voltage-source inverters (multipole converters), a substantial diversity of ZVT topologies has been proposed to improve the performance of the converters, such as the ZVT circuits wi

Style APA, Harvard, Vancouver, ISO itp.

42

Russi, Jumar Luís. "Técnicas de integração de circuitos de auxílio à comutação aplicadas a inversores e a sistemas multi-pólos." Universidade Federal de Santa Maria, 2007. http://repositorio.ufsm.br/handle/1/3649.

Pełny tekst źródła

Streszczenie:

Conselho Nacional de Desenvolvimento Científico e Tecnológico<br>This Ph. D. dissertation presents contributions to the investigation of soft-switching cells with integrated components, presenting three main approaches: (i) Soft-switching cells with filter coupled inductor; (ii) Integrated soft-switching cells of the ZVT type for multipole systems; and (iii) Integrated soft-switching cells for several soft-switching techniques for multipole systems. Firstly it is presented a generic diagram for softswitching inverters with coupled filter inductor. From the generic diagram the turn-on snubber,

Style APA, Harvard, Vancouver, ISO itp.

43

Гріша, Віталій Віталійович, та Vitalii Hrisha. "Підвищення стійкості електромережі трансформаторної підстанції 110/10 кВ". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, кафедра електричної інженерії,Тернопіль, Україна, 2021. http://elartu.tntu.edu.ua/handle/lib/36671.

Pełny tekst źródła

Streszczenie:

Особливої актуальності набувають питання аналізу нинішніх та перспективних режимів роботи електроенергосистем з точки зору оцінювання їх стійкості в різних режимах роботи. Виходячи із складності явищ та процесів, що відбуваються в енергетичних системах, «фізичне» поняття стійкості традиційно представляють двома складовими: стійкістю за активною потужністю й стійкістю за напругою [10]. Дослідженнями встановлено, що основна причина неконтрольованого падіння напруги та втрати стійкості є неспроможність енергосистеми підтримати баланс реактивної потужності на виділеній системі шин чи у виділеній

Style APA, Harvard, Vancouver, ISO itp.

44

Moraes, Luciano Camara Bueno de. "Tração eletrica como alternativa energetica : uma proposta para a conversão de veiculos automotivos de uso urbano." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/259312.

Pełny tekst źródła

Streszczenie:

Orientador: Jose Antonio Siqueira Dias<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação<br>Made available in DSpace on 2018-08-08T10:27:05Z (GMT). No. of bitstreams: 1 Moraes_LucianoCamaraBuenode_M.pdf: 4566206 bytes, checksum: 004300417197b06c786d6cac40898584 (MD5) Previous issue date: 2007<br>Resumo: Este trabalho tem como objetivo propor um sistema de baixo custo para conversão de veículos urbanos convencionais para propulsão elétrica. Serão abordadas também, técnicas, de paralelismo de dispositivos semicondutores para altas d

Style APA, Harvard, Vancouver, ISO itp.

45

Saini, Dalvir K. "Gallium Nitride: Analysis of Physical Properties and Performance in High-Frequency Power Electronic Circuits." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1438013888.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Vyakaranam, Bharat GNVSR. "DYNAMIC HARMONIC DOMAIN MODELING OF FLEXIBLE ALTERNATING CURRENT TRANSMISSION SYSTEM CONTROLLERS." Cleveland State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=csu1324673091.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Olsson, Johanna. "Implementation of Nodes in HVDC Grids." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-293884.

Pełny tekst źródła

Streszczenie:

This project is made for a deeper understanding ofhow frequency and amplitude of the waves that create the controlwave in a Pulse Width Modulated 2-level inverter affect the powerquality and power losses. The results were that a high frequencyreduces the Total Harmonic Distortion but increases the powerloss. The amplitude, however, reduces both the Total HarmonicDistortion and the power loss as it increases. All the analyseswere done in a simulation program called Simulink. The resultscan be applied when improving High Voltage Direct Currentinverters to develop a functional High Voltage Direct

Style APA, Harvard, Vancouver, ISO itp.

48

Johansson, Simon. "Design of power supplies for Piezo LEGS and SiC experiment : KTH Student satellite MIST." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-196216.

Pełny tekst źródła

Streszczenie:

KTH is funding a project whose goal is to send a satellite into space. This project is called MIST (Miniature Student Satellite) which is assembled by a team of students at KTH. On the satellite there are experiments that are invented by other teams, in two of those experiments a power supply is required. This thesis is a technical investigation on how to design the power supply to both of those experiments, which are called SiC and Piezo LEGS. Piezo LEGS will investigate how their nanosized motors will behave and function in a space environment. SiC will investigate how their silicone carbide

Style APA, Harvard, Vancouver, ISO itp.

49

PARISE, LUIGI. "Service continuity in complex power systems: safety, operation and maintenance." Doctoral thesis, 2014. http://hdl.handle.net/11573/645095.

Pełny tekst źródła

Streszczenie:

The research aims to define electrical architectures based on the rationalization of the distribution structure and of power sources with the achievement of the primary objectives of service continuity, power quality, safety and safe maintenance. The thesis consists of two parts: the first part deals with the architecture impact on a complex system analyzing the system configuration and operational safety aspects. New developments and methodologies are presented in the study of critical systems. A theory of complex systems for safety, operation and maintenance aspects is defined that enables

Style APA, Harvard, Vancouver, ISO itp.

50

Kimball, Jonathan W. "Digital control techniques for switching power converters /." 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3301169.

Pełny tekst źródła

Streszczenie:

Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2007.<br>Source: Dissertation Abstracts International, Volume: 69-02, Section: B, page: 1207. Adviser: Philip T. Krein. Includes bibliographical references (leaves 97-113) Available on microfilm from Pro Quest Information and Learning.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!