Gotowe bibliografie tematyczne / Static forces

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Static forces”

Autor: Grafiati
Data publikacji: 2 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Static forces”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Static forces"

1

Speight, J. M. "Static intervortex forces." Physical Review D 55, no. 6 (1997): 3830–35. http://dx.doi.org/10.1103/physrevd.55.3830.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Meyer, Harvey B. "Static forces in gauge theories." Nuclear Physics B 758, no. 1-2 (2006): 204–26. http://dx.doi.org/10.1016/j.nuclphysb.2006.09.027.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Zhang, Xiang Ming, Li Bao Zhu, An Wen Wang, Shao Hong Yang, and Ming Yong Hu. "Superficial Discussion on New Framework of Static Equilibrium." Applied Mechanics and Materials 670-671 (October 2014): 691–95. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.691.

Pełny tekst źródła
Streszczenie:
Statics is set up on the basis of 4 axioms of statics. Although these axioms are distillate and summarizing of the accumulated humankind's experience in long-range production and life, introduction of these axioms to statics seems a bit abrupt, especially the critical axiom "resultant of two forces" far fetched. This article was an attempt to present the embodying description of the effect of force and force system, based on the nature of effect of force and the equivalent and equilibrium of force systems. On this basis, theorem of two forces resultant and the theorem of two forces balance wer
Style APA, Harvard, Vancouver, ISO itp.
4

PROF.CHAVAN, ASHWINI GURUDEO, and RAJANI.DIGAMBAR PROF.MUDGUNDI. "PSEUDO STATIC SLOPE STABILITY ANALYSIS." JournalNX - A Multidisciplinary Peer Reviewed Journal NITET2017 (March 16, 2017): 80–83. https://doi.org/10.5281/zenodo.1461397.

Pełny tekst źródła
Streszczenie:
Earth embankments are required for railways, roadways, earth dams, leeves and river training works. Stability of these embankments or slopes needs to be thoroughly analysed. Their failure occurs in every conceivable manner, slowly or suddenly and with or without any apparent provocation leading to loss of life as well as colossal economic loss. Failure of slope takes place due to action of gravitational forces and seepage forces within the soil. In this paper, it has been proposed to analyze stability of slope considering static and dynamic forces. However to reduce the complexity in dynamic a
Style APA, Harvard, Vancouver, ISO itp.
5

Kaplan, Daniel. "Observing the Forces Involved in Static Friction Under Static Situations." Physics Teacher 51, no. 4 (2013): 224–25. http://dx.doi.org/10.1119/1.4795364.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Zhulina, E. B., O. V. Borisov, and T. M. Birshtein. "Static Forces in Confined Polyelectrolyte Layers." Macromolecules 33, no. 9 (2000): 3488–91. http://dx.doi.org/10.1021/ma990579p.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Diestler, D. J., E. Rajasekaran, and X. C. Zeng. "Static Frictional Forces at Crystalline Interfaces." Journal of Physical Chemistry B 101, no. 25 (1997): 4992–97. http://dx.doi.org/10.1021/jp970395h.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Cahill, Kevin. "Static forces in noncompact SU(2)." Nuclear Physics B - Proceedings Supplements 26 (January 1992): 453–55. http://dx.doi.org/10.1016/0920-5632(92)90302-9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Dragomirescu, Anca Oana, Elina Teodorescu, Viorica Tarmure, et al. "Variation of Static Frictional Forces in the Fixed Orthodontic System." Revista de Chimie 70, no. 11 (2019): 3954–56. http://dx.doi.org/10.37358/rc.19.11.7679.

Pełny tekst źródła
Streszczenie:
Currently, the aesthetic appearance of fixed orthodontic appliances is an important factor for patients seeking orthodontic treatment. The aim of this study was to evaluate static frictional forces generated by different types of round 0.016` NiTi archwires, with and without aesthetic coating, when coupled with monocrystalline alumina brackets. The static frictional force was determined using a testing machine for measuring compression and tension forces. The results showed a variation of static frictional forces depending on the type of archwire used. Uncoated archwires have produced the lowe
Style APA, Harvard, Vancouver, ISO itp.
10

Dragomirescu, Anca Oana, Elina Teodorescu, Viorica Tarmure, et al. "Variation of Static Frictional Forces in the Fixed Orthodontic System." Revista de Chimie 70, no. 11 (2019): 3954–56. http://dx.doi.org/10.37358/rc.70.19.11.7679.

Pełny tekst źródła
Streszczenie:
Currently, the aesthetic appearance of fixed orthodontic appliances is an important factor for patients seeking orthodontic treatment. The aim of this study was to evaluate static frictional forces generated by different types of round 0.016 NiTi archwires, with and without aesthetic coating, when coupled with monocrystalline alumina brackets. The static frictional force was determined using a testing machine for measuring compression and tension forces. The results showed a variation of static frictional forces depending on the type of archwire used. Uncoated archwires have produced the lowes
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Static forces"

1

Heintz, Sofia. "Muscular forces from static optimization." Licentiate thesis, KTH, Mechanics, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3943.

Pełny tekst źródła
Streszczenie:
<p>At every joint there is a redundant set of muscle activated during movement or loading of the system. Optimization techniques are needed to evaluate individual forces in every muscle. The objective in this thesis was to use static optimization techniques to calculate individual muscle forces in the human extremities.</p><p>A cost function based on a performance criterion of the involved muscular forces was set to be minimized together with constraints on the muscle forces, restraining negative and excessive values. Load-sharing, load capacity and optimal forces of a system can be evaluated,
Style APA, Harvard, Vancouver, ISO itp.
2

Kinsella, Mary E. "Ejection forces and static friction coefficients for rapid tooled injection mold inserts." Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1092660338.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--Ohio State University, 2004.<br>Title from first page of PDF file. Document formatted into pages; contains xvi, 206 p.; also includes graphics (some col.). Includes bibliographical references (p. 167-173). Available online via OhioLINK's ETD Center
Style APA, Harvard, Vancouver, ISO itp.
3

David, Giacomo. "Static and dynamic forces accuracy of a Lightweight Collaborative Robot through impedance control." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amslaurea.unibo.it/25461/.

Pełny tekst źródła
Streszczenie:
Industry 4.0 has become established, arousing the great interest of curiosities and fears for the impact not yet recognized. Human-robot collaboration is also being given more emphasis since collaborative robots improve safety and flexibility. However, not for all possible applications, the great initial economic effort of these machines may pay off expectations. This dissertation aims to give useful measurements performed on a KUKA LBR iiwa, an advanced collaborative robot. By executing particular tasks, like polishing, it has been noticed that Cartesian forces reconstructed by the robot
Style APA, Harvard, Vancouver, ISO itp.
4

Leaf, Timothy D. "Investigation of the vertical distribution of seismic forces in the static force and equivalent lateral force procedures for seismic design of multistory buildings /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1136093311&sid=1&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Raoof, Mohammed. "Interwire contact forces and the static, hysteretic and fatigue properties of multi-layer structural strands." Thesis, University of London, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.339423.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Zhang, Yi. "Static and Dynamic Behaviour of Inter-granular Liquid Bridges: Hysteresis of Contact Angle and Capillary Forces." Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/16151.

Pełny tekst źródła
Streszczenie:
The wet granular material, a mixture of solid grains, liquid and air, has been studied in many industrial applications. Understanding the mechanical properties of wet granular materials is extremely important in geotechnical engineering. The cohesion in these materials arising from a liquid bridge between a pair of grains is produced by the capillary force and the viscous force. Thus, investigating the behaviour of liquid bridges between grains helps people obtain a better understanding of the factors influencing the cohesion, including the geometry and topological distribution of liquid bridg
Style APA, Harvard, Vancouver, ISO itp.
7

Bjoland, Vegard Sætre. "Static and dynamic response of a structure subjected to ice forces – Evaluation of a lighthouse overloading event." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for konstruksjonsteknikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11286.

Pełny tekst źródła
Streszczenie:
Exploitation of areas and natural resources in arctic and sub-arctic areas makes guidelines for designing structures exposed to ice-forces a necessity. Ice actions on a structure include both static and dynamic components, and methods to calculate the magnitude of the ice loads are given in several common design codes. The static load component is constant and dependent on structure geometry and ice thickness, while dynamic loading is given in the design codes as time varying forcing functions. In the winter of 1985 Björnklacken lighthouse, located north in the Bothnian Bay, was overloaded by
Style APA, Harvard, Vancouver, ISO itp.
8

Butcher, Ashley Samuel. "The observation of health and wellbeing through continuous long term monitoring of static and dynamic body forces during rest." Thesis, University of Cambridge, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.708898.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Almi, Stefano. "Some results on the mathematical analysis of crack problems with forces applied on the fracture lips." Doctoral thesis, SISSA, 2016. http://hdl.handle.net/20.500.11767/4878.

Pełny tekst źródła
Streszczenie:
This thesis is devoted to the study of some models of fracture growth in elastic materials, characterized by the presence of forces acting on the crack lips. Working in the general framework of rate-independent processes, we first discuss a variational formulation of the problem of quasi-static crack evolution in hydraulic fracture. Then, we investigate the crack growth process in a cohesive fracture model, showing the existence of an evolution satisfying a weak Griffith's criterion. Finally, in the last chapter of this work we investigate, in the static case, the interaction between the energ
Style APA, Harvard, Vancouver, ISO itp.
10

Ngalamou, Pideu Lucien Aimé. "Résonateur composite à base de polymère piézoélectrique pour la mesure de forces statiques : instrumentation et étude." Université Joseph Fourier (Grenoble), 1994. http://www.theses.fr/1994GRE10236.

Pełny tekst źródła
Streszczenie:
L'utilisation de materiaux piezoelectriques pour la mesure de contraintes mecaniques dynamiques ou quasi-statiques est une application de longue date ; cependant, l'effet piezoelectrique direct n'est intrinsequement pas adapte aux mesures de contraintes statiques. Dans ce memoire nous presentons un systeme de mesure de contraintes statiques par variation de la frequence de resonance d'un resonateur composite. Nous avons utilise un resonateur composite forme d'un element piezoelectrique (pvf#2) pris entre deux electrodes en laiton, ces electrodes etant elles-memes recouverte de deux feuilles d'
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Static forces"

1

Howell, William E. Static footprint local forces, areas, and aspect ratios for three type VII aircraft tires. Langley Research Center, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

E, Tanner Sharon, Vogler William A, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Static footprint local forces, areas, and aspect ratios for three type VII aircraft tires. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Curry, Robert E. In-flight total forces, moments, and static aeroelestic characteristics of an oblique-wing research airplane. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Curry, Robert E. In-flight total forces, moments, and static aeroelestic characteristics of an oblique-wing research airplane. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Curry, Robert E. In-flight total forces, moments, and static aeroelestic characteristics of an oblique-wing research airplane. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Gerd, Kanning, and Ames Research Center, eds. A comprehensive estimate of the static aerodynamic forces and moments of the 8- by 8- by 20-foot cargo container. National Aeronautics and Space Administration, Ames Research Center, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Gerd, Kanning, and Ames Research Center, eds. A comprehensive estimate of the static aerodynamic forces and moments of the 8- by 8- by 20-foot cargo container. National Aeronautics and Space Administration, Ames Research Center, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Davis, Pamela A. Quasi-static and dynamic response characteristics of F-4 bias-ply and radial-belted main gear tires. National Aeronautics and Space Administration, Langley Research Center, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Davis, Pamela A. Quasi-static and dynamic response characteristics of F-4 bias-ply and radial-belted main gear tires. National Aeronautics and Space Administration, Langley Research Center, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Davis, Pamela A. Quasi-static and dynamic response characteristics of F-4 bias-ply and radial-belted main gear tires. National Aeronautics and Space Administration, Langley Research Center, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Static forces"

1

Guerra, David V. "Forces and Static Equilibrium." In Introductory Physics for the Life Sciences: Mechanics (Volume One). CRC Press, 2023. http://dx.doi.org/10.1201/9781003308065-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Zhang, Dan, Kailiang Zhang, and Andreas Müller. "Manipulator Velocities and Static Forces." In Handbook of Manufacturing Engineering and Technology. Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-4670-4_113.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Zhang, Dan, Kailiang Zhang, and Andreas Müller. "Manipulator Velocities and Static Forces." In Handbook of Manufacturing Engineering and Technology. Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-4976-7_113-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Shoham, Sharon, and Orna Grumberg. "Compositional Verification and 3-Valued Abstractions Join Forces." In Static Analysis. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-74061-2_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Manners, Joy. "Gravitational and electric forces and fields." In Static Fields and Potentials. CRC Press, 2022. http://dx.doi.org/10.1201/9780429187797-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Buhmann, Stefan Yoshi. "Casimir–Polder Forces on Excited Atoms: Static Theory." In Springer Tracts in Modern Physics. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-32466-6_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Balasubramaniam, Sudharsan, Daniel Kiracofe, and Arvind Raman. "Understanding Surface Forces Using Static and Dynamic Approach-Retraction Curves." In Scanning Probe Microscopy in Industrial Applications. John Wiley & Sons, Inc, 2013. http://dx.doi.org/10.1002/9781118723111.ch3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Weisenberger, Richard W., and Matthew S. Stefanski. "Controllability of Aerospace Static Mechanical Loading Coupled with Dynamic Forces." In Shock & Vibration, Aircraft/Aerospace, Energy Harvesting, Acoustics & Optics, Volume 9. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-54735-0_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Bhaskar, K., and T. K. Varadan Retd. "Effect of In-Plane Forces on Static Flexure, Dynamics and Stability." In Plates. John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118894705.ch7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hussein, Hussein, Marc Gouttefarde, and François Pierrot. "Static Modeling of Sagging Cables with Flexural Rigidity and Shear Forces." In Advances in Robot Kinematics 2018. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-93188-3_36.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Static forces"

1

Walther, Carolyn, Vinod Lakshminarayan, David Coleman, and Moble Benedict. "Experimental and Computational Studies to Understand Unsteady Aerodynamics of Cycloidal Rotors in Hover at Ultra-low Reynolds Numbers." In Vertical Flight Society 73rd Annual Forum & Technology Display. The Vertical Flight Society, 2017. http://dx.doi.org/10.4050/f-0073-2017-12001.

Pełny tekst źródła
Streszczenie:
This paper provides a fundamental understanding of the unsteady aerodynamic phenomena on a cycloidal rotor blade operating at ultra-low Reynolds numbers (Re∼18,000) by utilizing a combination of experimental (force and flowfield measurements) and computational (CFD) studies. For the first time ever, the instantaneous blade fluid dynamic forces on a rotating cyclorotor blade were measured, which, along with PIV-based flowfield measurements revealed the key fluid dynamic mechanisms acting on the blade. A 2D CFD analysis of the cycloidal rotor was developed and systematically validated using both
Style APA, Harvard, Vancouver, ISO itp.
2

Wagner, M. "Forces between static-light mesons." In The XXVIII International Symposium on Lattice Field Theory. Sissa Medialab, 2011. http://dx.doi.org/10.22323/1.105.0162.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Huang, Jack Youqin. "Coefficients of Friction: Static Versus Dynamic." In 2020 Joint Rail Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/jrc2020-8025.

Pełny tekst źródła
Streszczenie:
Abstract This paper deals with the problem of static and dynamic (or kinetic) friction, namely the coefficients of friction for the two states. The coefficient of static friction is well known, and its theory and practice are commonly accepted by the academia and the industry. The coefficient of kinetic friction, however, has not fully been understood. The popular theory for the kinetic friction is that the coefficient of dynamic friction is smaller than the coefficient of static friction, by comparison of the forces applied in the two states. After studying the characteristics of the coeffici
Style APA, Harvard, Vancouver, ISO itp.
4

Bataineh, Ahmad M., Hassen M. Ouakad, and Mohammad I. Younis. "Static Response of Microbeams due to Capillary and Electrostatic Forces." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-52037.

Pełny tekst źródła
Streszczenie:
Micro-sensors or micro-switches usually operate under the effect of electrostatic force and could face some environmental effects like humidity, which may lead to condensation underneath the beams and create strong capillary forces. Those tiny structures are principally made of microbeams that can undergo instabilities under the effect of those created huge capillary forces. In fact, during the fabrication of microbeams, there is an important step to separate the beam from its substrate (wet etching). After this step, the microstructure is dried, which may causes the onset of some droplets of
Style APA, Harvard, Vancouver, ISO itp.
5

Judge, Carolyn Q. "Static And Dynamic Forces and Wetted Lengths for a Planing Hull Model Forced in Roll." In SNAME Chesapeake Power Boat Symposium. SNAME, 2012. http://dx.doi.org/10.5957/cpbs-2012-011.

Pełny tekst źródła
Streszczenie:
An experimental program at the United States Naval Academy has been designed to investigate the transverse plane stability of planing hulls. An experimental mechanism to force a planing hull model in roll motion was designed and built. The first model tested was a wooden prismatic planing hull with a constant deadrise of 20o , a beam of 1.48 ft (0.45 m), and a total length of 5 ft (1.52 m). The model was forced in roll while fixed in pitch, heave, sway, yaw and surge. The tests were done at three model speeds, two displacements, three roll amplitudes, and four oscillation frequencies. In addit
Style APA, Harvard, Vancouver, ISO itp.
6

Otani, Akihito, and Satoru Kai. "Study on Dynamic Response by Alternating and Static Load." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63363.

Pełny tekst źródła
Streszczenie:
An inertia force in a seismic response of structure excited by an earthquake generates the seismic force acting on the structure. The handling of seismic forces has been being discussed in terms of how the seismic force on a piping controls the deformation of the piping, load-controlled or displacement-controlled. A seismic design code for nuclear facilities applied in Japan qualifies this kind of seismic forces as primary stress components which shall be limited to prevent any plastic collapse, on the assumption that the seismic force mainly consists of load-controlled loads and the deformati
Style APA, Harvard, Vancouver, ISO itp.
7

Hidalgo-Carrio, Javier, Ajish Babu, and Frank Kirchner. "Static forces weighted Jacobian motion models for improved Odometry." In 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014). IEEE, 2014. http://dx.doi.org/10.1109/iros.2014.6942557.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Yannaccone, John R., and Larry Sicher. "Comparison of Dynamic and Static Web Loop Deployment Forces." In SAE 2006 World Congress & Exhibition. SAE International, 2006. http://dx.doi.org/10.4271/2006-01-1682.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lobo-Guerrero, S., and L. E. Vallejo. "Crushing of Particles under Simulated Static and Centrifuge Forces." In GeoFlorida 2010. American Society of Civil Engineers, 2010. http://dx.doi.org/10.1061/41095(365)52.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Cheng, I., C. H. Liu, and Yin-Tien Wang. "Contact Force Analysis in Static Two-Fingered Robot Grasping." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12160.

Pełny tekst źródła
Streszczenie:
Static grasping of a spherical object by two robot fingers is studied in this paper. The fingers may be rigid bodies or elastic beams, they may grasp the body with various orientation angles, and the tightening displacements may be linear or angular. Closed-form solutions for normal and tangential contact forces due to tightening displacements are obtained by solving compatibility equations, force-displacement relations based on Hertz contact theory, and equations of equilibrium. Solutions show that relations between contact forces and tightening displacements depend upon the orientation of th
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Static forces"

1

Bamberger, J., J. Bates, and E. Waters. Experimental characterization of jet static forces impacting waste tank components. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6855943.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Mitchell, John Anthony, David S. Epp, and Jonathan W. Wittwer. On the modeling, design and validation of two dimensional quasi-static eddy current forces in a mechanical oscillator. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/876522.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Wang, Wei, Michael Brown, Matteo Ciantia, and Yaseen Sharif. DEM simulation of cyclic tests on an offshore screw pile for floating wind. University of Dundee, 2021. http://dx.doi.org/10.20933/100001231.

Pełny tekst źródła
Streszczenie:
Screw piles need to be upscaled for offshore use e.g. being an alternative foundation and anchor form for offshore floating wind turbines, although the high demand of vertical installation forces could prevent its application if conventional pitch-matched installation is used. Recent studies, using numerical and centrifuge physical tests, indicated that the vertical installation force can be reduced by adopting over-flighting which also improved axial uplift capacity of the screw pile. The current study extends the scope to axial cyclic performance with respect to the installation approach. Us
Style APA, Harvard, Vancouver, ISO itp.
4

Winter, Charlie, Abdul Sayed, and Abdullah Alrhmoun. A “New” Islamic Emirate? The Taliban’s Outreach Strategy in the Aftermath of Kabul. RESOLVE Network, 2022. http://dx.doi.org/10.37805/ogrr2022.1.afg.

Pełny tekst źródła
Streszczenie:
As the Taliban’s forces swept across Afghanistan in July and August, their triumphalist—and fundamentally revolutionary—discourse became exponentially more pronounced. The moment it seized Kabul, however, the Taliban had to reorder its communications priorities. As Afghanistan’s new de facto government, it needed to expand on what its outreach strategists had been doing to date, i.e., setting out political aspirations, emphasizing military capabilities, and attacking the legitimacy of adversaries. Now, it had to take on a more complex strategic communications task: demonstrating that its new s
Style APA, Harvard, Vancouver, ISO itp.
5

White, Randolph C., and Jr. The Airborne Forces of the United States Army: Cornerstone of Force Projection. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada363187.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Lv, Yongcai, Yanhua Yao, Jingjing Lei, and Tao Tang. The role of cold forceps technique in diminutive colorectal polyps: a systematic review and meta-analysis of randomized clinical trials. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.11.0135.

Pełny tekst źródła
Streszczenie:
Review question / Objective: The European Society of Gastrointestinal Endoscopy and the United States Multi-Society Task Force recommends the use of old snare polypectomy （CSP) for &lt; 10 mm polyps. However, recent randomized clinical trials (RCTs) showed some conflicting results in cold forceps technique including cold forceps polypectomy (CFP) and jumbo forceps polypectomy (JFP) compared with CSP in diminutive colorectal polyps (DCPs) (≤5mm), especially in 1-3mm polyps. Condition being studied: Current studies have some conflicting results in the cold forceps technique vs cold snare techniq
Style APA, Harvard, Vancouver, ISO itp.
7

Hall, Chris. Development of an Infantry ‘Disrupt Force’ and Technological Experimentation in an Operational Unit. Giraffe Publishing, 2025. https://doi.org/10.61451/2675146.

Pełny tekst źródła
Streszczenie:
In 2021–2022, the 1st Battalion, Royal Australian Regiment (1 RAR), experimented to develop a ‘disrupt force’ consisting of light infantry augmented with uncrewed aerial systems and ground vehicles. This group operated ahead of other forces to report on the opposing force, but also ambushed enemy reinforcement and withdrawal routes. The disrupt force actively attacked and degraded opposing forces and their plans, isolating objectives and setting the conditions for friendly combat teams to conduct decisive manoeuvre. The aims of this experiment were twofold: to provide feedback on individual pl
Style APA, Harvard, Vancouver, ISO itp.
8

Tulak, Arthur N., R. W. Kraft, and Don Silbaugh. State Defense Forces: Forces for NORTHCOM and Homeland Security? Defense Technical Information Center, 2003. http://dx.doi.org/10.21236/ada421654.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Rodebaugh, Dave, and Allan Erickson. Environmental Assessment: Construct Fire Station at Grand Forks Air Force Base. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada447885.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hodges, Donald G., Pamela J. Jakes, and Frederick W. Cubbage. The status of forest management research in the United States. U.S. Department of Agriculture, Forest Service, North Central Forest Experiment Station, 1988. http://dx.doi.org/10.2737/nc-gtr-126.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Static forces” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii