Готові списки джерел за темами / Abrasion Resistance Machine

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій

Добірка наукової літератури з теми "Abrasion Resistance Machine"

Автор: Grafiati
Опубліковано: 4 червня 2021
Оновлено: 3 лютого 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Abrasion Resistance Machine".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Abrasion Resistance Machine"

1

TARASIUK, Wojciech, Jerzy NAPIÓRKOWSKI, Krzysztof LIGIER, and Bazyli KRUPICZ. "COMPARISON OF THE WEAR RESISTANCE OF HARDOX 500 STEEL AND 20MnCr5." Tribologia 273, no. 3 (2017): 165–70. http://dx.doi.org/10.5604/01.3001.0010.6254.

Повний текст джерела
Анотація:
The paper presents the results of experimental studies on abrasion resistance of Hardox 500 steel and 20MnCr5 steel subjected to thermo-chemical treatment. These types of steel are often used for agricultural or construction machinery. Abrasion tests were performed on a T-11 pin using a disc tester. The test conditions correspond to the wear caused by micro-grinding and grain-cutting using particles from the product as well as a result of abrasion produced by loose abrasive material created through the chipping of silica sand grains. The obtained results can be useful in the selection of mater
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Li, Hao Ping, Feng Li, Zhi Fan Fang, and Yong Qing Chen. "Study on Turbine Blade Abrasion Mechanism and Abrasion Resistance Performance Testing Machine." Advanced Materials Research 621 (December 2012): 206–10. http://dx.doi.org/10.4028/www.scientific.net/amr.621.206.

Повний текст джерела
Анотація:
This paper studied the flow indicators affecting abrasion through turbine component surface, analyzed the indicator data of major rivers, which provided design parameters and design basis of the abrasion test equipment; and studied abrasion test methods of turbine overflow surface, determined the rotating-jet mode abrasion test principle and design parameters of the rotating-jet abrasion testing machine
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Müller, M., and P. Hrabě. "Overlay materials used for increasing lifetime of machine parts working under conditions of intensive abrasion." Research in Agricultural Engineering 59, No. 1 (2013): 16–22. http://dx.doi.org/10.17221/64/2011-rae.

Повний текст джерела
Анотація:
We evaluated a degree of the machine part abrasive wear with secondary focus on their hardness. The paper states laboratory results of overlay systems from their wear resistance point of view. Laboratory experiments were carried out by two-body abrasion on bonded abrasive of a P120 granularity. The results proved an increased abrasive wear resistance of martensitic, ledeburitic and stellitic overlays against eleven different original products. The overlay UTP Ledurit 60 reached the optimum values. The GD-OES (Glow Discharge Optical Emission Spectroscopy) method proved the different chemical co
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ueda, Keiji, Nobuyuki Ishikawa, and Yasuhiro Murota. "Influence of Matrix Structure and Hard Carbide on Abrasive Resistance of Steel Plates." Materials Science Forum 706-709 (January 2012): 2342–47. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.2342.

Повний текст джерела
Анотація:
The microstructure of abrasion resistant steel plate usually consists of as quenched martensite, because harder matrix structure improves abrasion resistance of a steel plate. However hard martensitic material has lower formability, which is the important material property for fabricating machine parts. In this paper, a new type of abrasion resistant technique for steel plate is introduced. The steel provides good combination of high abrasion resistance and excellent formability without increasing hardness. The key technology to balance abrasion resistance and formability is the microstructura
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Tian, Hao Liang, Shi Cheng Wei, Yong Xiong Chen, Hui Tong, Zhi Bin Zhang, and Bin Shi Xu. "Study on Composition and Mechanical Property of New High Abrasion Resistant Alloy Used in High Arc Spaying." Advanced Materials Research 531 (June 2012): 189–93. http://dx.doi.org/10.4028/www.scientific.net/amr.531.189.

Повний текст джерела
Анотація:
Spraying wire was widely used in remanufacturing work piece for worn failure. With the demand of high abrasion resistant wire, new type alloy was developed. The solidification structures of the new high abrasion resistant alloy (HARA) containing Mn, Cr, Si, C and the structure was studied after tension by scanning electron microscopy (SEM). The phase evolution was analyzed by X-ray diffraction and Rockwell hardness evaluated on the hardness testing. The abrasion behavior of HARA alloy used in the liner of wet-grinding machine in metallurgical industry is investigated under impacted energy of 0
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Czaplicki, Zdzisław, Adam Rylski, Wioleta Serweta, and Stanisław Strzelecki. "Research on Footwear Laces with Respect to Abrasion Resistance and Spontaneous Untying." Fibres and Textiles in Eastern Europe 28, no. 3(141) (2020): 23–26. http://dx.doi.org/10.5604/01.3001.0013.9014.

Повний текст джерела
Анотація:
In this paper, two types of footwear laces research were undertaken. The first was connected with abrasion resistance and the second with the displacement force at the knot. The abrasion resistance was registered by the level of abrasion for standard eyelet. The displacement force was measured with the use of a tensile test machine, where the force and extension were registered. As a criterion of test evaluation, the maximum force was established when the knot was untied. The research was conducted for a set of different types of shoelaces (differing in shape, structure and raw materials). The
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Matseevich, Andrey, Tatyana Matseevich, and Andrey Askadskii. "Study of the abrasion resistance of wood-polymer composites and mixtures of ABS-plastic with polyvinyl chloride." MATEC Web of Conferences 196 (2018): 04069. http://dx.doi.org/10.1051/matecconf/201819604069.

Повний текст джерела
Анотація:
The abrasion of materials based on blends of ABS plastic with polyvinyl chloride (PVC) as well as terraced boards based on wood-polymer composites (DPC) has been studied. The measurements were carried out on a drum-type machine, and on a Taber's abrasimeter. For blends of ABS plastic with PVC at abrasion path length 600 m wear is 0.85%. For terracotta boards based on WPC, the wear during the test (loss of mass) was 0.0042 g. The abrasion of the sample was 9.29×10-5 g/cm2. Thus, the obtained blends should be recommended for application for floor coverings, since they possess negligible abrasion
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Xie, Jing Pei, Ai Qin Wang, Wen Yan Wang, Ji Wen Li, and Luo Li Li. "Erosion Wear Behaviors of Low Chromium Cast Iron Containing Nickel." Advanced Materials Research 233-235 (May 2011): 2984–87. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.2984.

Повний текст джерела
Анотація:
The erosion wear experiments of low-chromium cast iron containing nickel were done by MCF-30 Erosion Abrasion Experimental Machine. The structure and surface morphology after erosive wear were analyzed by SEM and XRD. The results indicated that the distribution of carbide was reticular after tempering at 250and oil quenching at 960. The maximal erosion wear rate was appeared at 60 °erosion angle, high acid corrosion media have great influence on the abrasion resistance of experimental material and corrosion effects almost had no influence on the abrasion resistance of experimental material in
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Krauledaitė, Julija, Kristina Ancutienė, Virginijus Urbelis, Sigitas Krauledas, and Virginija Sacevičienė. "Development and evaluation of 3D knitted fabrics to protect against mechanical risk." Journal of Industrial Textiles 49, no. 3 (2018): 383–401. http://dx.doi.org/10.1177/1528083718783316.

Повний текст джерела
Анотація:
In this research, eight different 3D weft-knitted fabrics were developed and evaluated. 3D fabrics have been knitted on circular weft-knitting machines with two different gauges: 20E gauge and 28E gauge. Three different raw materials were used for the fabric’s production: high molecular mass polyethylene (HPPE) yarn and 0.05 mm diameter steel wire in the outer layers (for the front and reverse) and polyamide yarn in the binding layer. The experiments were conducted on the developed 3D knitted fabrics to determine the fabric’s resistance to mechanical risks such as circular blade cut, puncture,
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Cheng, Zhi Fang, Hong Sheng Ding, Hui Rong, and Li Geng Zhao. "Abrasion Resistance of Alumina-Titanium Dioxid Coating at High Temperature." Applied Mechanics and Materials 302 (February 2013): 115–18. http://dx.doi.org/10.4028/www.scientific.net/amm.302.115.

Повний текст джерела
Анотація:
Nano-structured and micron Al2O3-13%TiO2 coatings were deposited by air plasma spraying.Wear properties of the coatings under different temperature trough SRV friction and wear testing machine were studied, the results shows that the friction coefficient of nano and micron Al2O3-13%TiO2 coatings both have rising trend.with the temperature increases.The wear volume of micron coating is 1.8-2 times that of the nano coating..The nanometer Al2O3-13%TiO2 coating slide with ZrO2 is still compact and has no large crack after abrasion.
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "Abrasion Resistance Machine"

1

OLIVEIRA, Marcelo dos Anjos. "Desgaste abrasivo do aço Hadfield com diferentes teores de carbono em abrasômetro do tipo pino-disco." Universidade Federal de Pernambuco, 2016. https://repositorio.ufpe.br/handle/123456789/18671.

Повний текст джерела
Анотація:
Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2017-04-27T15:18:52Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Marcelo Oliveira.pdf: 7846435 bytes, checksum: 4659cf7d50095ccabdf49ebcc00f0bba (MD5)<br>Made available in DSpace on 2017-04-27T15:18:52Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Marcelo Oliveira.pdf: 7846435 bytes, checksum: 4659cf7d50095ccabdf49ebcc00f0bba (MD5) Previous issue date: 2016-08-31<br>A presente pesquisa teve como objetivo, inv
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Abrasion Resistance Machine"

1

Shui ji mo shi yu kang mo shi shui ji cai liao. Zhongguo shui li shui dian chu ban she, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Blickensderfer, Robert. Laboratory tests of spalling, breaking, and abrasion of wear-resistant alloys used in mining and mineral processing. U.S. Dept. of the Interior, Bureau of Mines, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Abrasion Resistance Machine"

1

Kett, Irving. "RESISTANCE to DEGRADATION of SMALL-SIZE COARSE AGGREGATE by ABRASION and IMPACT in the LOS ANGELES MACHINE." In Asphalt Materials and Mix Design Manual. Elsevier, 1998. http://dx.doi.org/10.1016/b978-0-8155-1425-1.50009-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

"Resistance to Degradation of Small-Sized Coarse Aggregates by Abrasion and Impact in the Los Angeles Machine (C 131)." In Engineered Concrete. CRC Press, 2009. http://dx.doi.org/10.1201/9781420091175-c7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Matsumura, M., and B. E. Chen. "Erosion-Resistant Materials." In Abrasive Erosion and Corrosion of Hydraulic Machinery. PUBLISHED BY IMPERIAL COLLEGE PRESS AND DISTRIBUTED BY WORLD SCIENTIFIC PUBLISHING CO., 2003. http://dx.doi.org/10.1142/9781848160026_0005.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Méausoone, Pierre-Jean, and Alfredo Aguilera. "Inventory of Experimental Works on Cutting Tools’ Life for the Wood Industry." In Research Developments in Wood Engineering and Technology. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4554-7.ch009.

Повний текст джерела
Анотація:
Woodworking is based on a trinomial machine/piece/tool. For maximum quality of the manufactured piece, it is important not to separate this trinomial, but the limited life of tools prevents that permanent contact. This phenomenon is due to the wear of the cutting parts of the tools. The prevention of wear is based on two methods. The first is to anticipate the end point of tool wear, changing these after a fixed period, no matter what. The other school is to recognize the tool wear at the event: the tools are changed once they are really worn out, finding faults on manufactured parts. A worn tool generates pieces with non-compliant quality or even unusable. A deeper understanding of wear and its consequences would change the tool at the right time. The tool wear for wood is due to several phenomena interacting with each other. The first dominating phenomenon is a corrosive attack that decreases the mechanical strength of the surface. The second is an abrasive attack whose work is facilitated by the reduced resistance of the surface. Repeated shocks can be in the degradation of the cutting edge, temperature acting as amplifier to wear. Understanding of the wear patterns can characterize the life of tools by wear measurement to find ways to extend this period with development of tool coatings, while maintaining optimal conditions for woodworking to get the best finish.
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Abrasion Resistance Machine"

1

Li, Haoping, and Feng Li. "Study on abrasion resistance mechanism of concrete and rotating-jet mode concrete abrasion resistance performance testing machine." In 2011 Second International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2011. http://dx.doi.org/10.1109/mace.2011.5988837.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Liu, Hou-lin, Man-hui Cao, Jie Chen, Yong Wang, and Cheng-bin Wang. "Experimental Study on Abrasion and Cavitation Resistance of Non-Metallic Coating Materials for Pump." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-5003.

Повний текст джерела
Анотація:
Abstract The protection of the flow-passage components of pump by using coating is an important method to increase wear resistance. This paper aims at examining abrasion resistance and cavitation erosion resistance of three typical non-metallic coating materials for pump including epoxy resin mortar, composite resin mortar and polyurethane. A wear-resistance test bench was built, using ultrasonic vibrating air eroding machine. Meanwhile, the main relative raw materials and formulas were introduced. The results indicate that: (1) The accumulated volume reduction of abrasion of composite resin m
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shurpali, Amogh Arvind, Emily Van Dam, J. Riley Edwards, David A. Lange, and Christopher P. L. Barkan. "Laboratory Investigation of the Abrasive Wear Mechanism of Concrete Crosstie Rail Seat Deterioration (RSD)." In 2012 Joint Rail Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/jrc2012-74107.

Повний текст джерела
Анотація:
Currently, there are divergent design and performance demands on railway infrastructure components due to increasing freight axle loads and cumulative gross tonnages, as well as increased investment in high-speed passenger rail development in North America. The divergence in loading and performance demands on shared infrastructure arises from the fact that while high-speed passenger trains exert lower loads at relatively high speeds, freight trains exert high loads at relatively low speeds. Improvements in infrastructure component designs are needed to achieve increased durability and tighter
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Jeon, Hyun Bae, Tae Hoon Song, Sung Ho Park, Sun Chul Huh, and Won Jo Park. "Fatigue Crack Growth Behavior of High Carbon Steel (SM53C) by Using Induction Hardening." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72452.

Повний текст джерела
Анотація:
Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The influence of high-frequency induction treatment on fatigue limit was experimentally examined with the special focus on the variation of surface microstructure and the fatigue crack initiation
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Chee, S. B., Ammar Al Shalabi, C. W. Chin, and B. F. Yousif. "On the Effect of Roller Materials on the Power Window Mechanism From a Tribological Perspective." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66112.

Повний текст джерела
Анотація:
This study serves to delineate the effects of material on the lifespan of a polymeric roller rubbing against a steel wire. Four materials, namely nylon, polyester, borosilicate glass and epoxy are the manipulated variables in conducting a simulation with a steel wire. A block-on-ring machine was used to conduct the tribo-experiments under dry contact condition. In concurrence with average operating conditions, the machine was set to 0.15 m/s sliding velocity, at an applied load of 10 N. Worn surfaces of the polymer were subsequently studied under optical microscopy. Frictional and wear resista
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Mohammadi, Parsa, and Z. Jane Wang. "Machine learning for quality prediction in abrasion-resistant material manufacturing process." In 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE). IEEE, 2016. http://dx.doi.org/10.1109/ccece.2016.7726783.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Saha, Gobinda C., A. Mateen, and Tahir I. Khan. "Tribological Performance Study of HVOF-Sprayed Microstructured and Nanostructured WC-17wt.%Co Coatings." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40086.

Повний текст джерела
Анотація:
Abrasive and erosive wear of components and machinery is an ongoing challenge in the oil sands industry in northern Alberta, Canada. To improve the wear resistance by increasing surface hardness of steels, heat treatments and deposition of hard layers of metal alloys (such as stellite) by fusion welding techniques are traditionally used. However, these deposition techniques are not applicable to all shapes and add considerable weight to the final component. Thermal spraying techniques such as the use of high velocity oxy-fuel (HVOF) composite coatings based on WC-Co cermet system offer better
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ramesh, C. S., and T. B. Prasad. "Abrasive Wear Behaviour of Al-Si-Graphite Composite Under Heat-Treated Condition." In ASME/STLE 2007 International Joint Tribology Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ijtc2007-44414.

Повний текст джерела
Анотація:
Composites were prepared from commercially available scrap piston by dispersing copper coated graphite particulates by stir casting, followed by heat treatment of the composite. Abrasive wear tests were conducted on the composites and the matrix alloy both before and after heat treatment. The test duration was 30min while coarse silicon carbide abrasive wheels were used. Wear was measured as weight loss of the specimen using digital weighing machine of accuracy 0.001gms. The worn surfaces were subjected to SEM analysis. Addition of graphite particulates followed by heat treatment has resulted
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Klinskaya, N., V. Jilyaev, and A. Pankratov. "Physico-Chemical Aspects of Plasma Spray Coatings." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p0747.

Повний текст джерела
Анотація:
Abstract The results of an investigation into compound, structure and some properties of composite plasma coatings based on stellite with an addition of titanium nitride are presented. It is shown that the coating formed in a gas-air plasma is characterized by better wear resistance and resistance to scaling. The results of industrial test lend support to wide use of such coatings in machine parts and units that work under the simultaneous influence of impact, abrasive wear and high temperature.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Tesfay, Hayelom D., Yuzhu Xie, Zhigang Xu, Bing Yan, and Z. C. Li. "An Experimental Study on Edge Chipping in Ultrasonic Vibration Assisted Grinding of Bio-Ceramic Materials." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1188.

Повний текст джерела
Анотація:
Bio-ceramics have been widely employed in dental restorations, repairing bones, and joint replacements etc. due to their high compressive strength, superior wear resistance, and natural aesthetical appearance. Abrasive machining processes such as grinding have been used to obtain a smooth surface and desired dimensions for bio-ceramic parts. However, a major technical issue resulted from abrasive machining processes is edge chipping. The edge chipping could lead to the failure of bio-ceramics and has to be removed by downstream processes. It not only increases machining cost but also introduce
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії